[SOLVED] Dependency problems Sun JDK, OpenJDK and Soprano

Hi there,
as I need the Sun JDK for programming, I wanted to replace OpenJDK with SunJDK. Here's what's happening:
schorsch@archie:~$ sudo pacman -S jdk
resolving dependencies...
looking for inter-conflicts...
:: jdk conflicts with openjdk6. Remove openjdk6? [Y/n] Y
error: failed to prepare transaction (could not satisfy dependencies)
:: jdk: requires jre
:: soprano: requires openjdk6
schorsch@archie:~$
What's the proper way to do this? Should I avoid having more than one java version installed on my machine? I guess so...
I'm doing quite a bit of java development and sometimes really need the latest Sun Java.
TIA,
Blackhole
Last edited by blackhole (2009-02-18 18:56:53)

Okay guys, I did a "pacman -Rd openjdk6 && pacman -S jdk" which worked fine:
schorsch@archie:~$ java -version
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode)
schorsch@archie:~$
However when I use Konqueror and go to http://www.java.com/en/download/help/testvm.xml in order to test my java version, it doesn't work.
More precisely the applet is not displayed at all. When I go to the Konqueror settings and to "Java & JavaScript", tick the checkbox "Use KIO" and refresh the page. I at least get a big gray square where the applet should be.
Do I have to install any additional java plugin? Is anybody out there using Konqueror with the Sun Jre?
//Edit: I've come across this: http://www.konqueror.org/javahowto/ but I was wondering whether this is already included in some Arch package. I don't wanna fiddle manually if there's a proper Arch way to do things.
TIA,
Blackhole
Last edited by blackhole (2009-02-18 13:58:17)

Similar Messages

  • I just bought iphone5 last 2 weeks.At first week i can use itune apps after these last 3 days i try to use itunes again and i couldnt open it...same as app store...please help me to solve my problem...thanks and god bless...

    i just bought iphone5 last 2 weeks.At first week i can use itune apps after these last 3 days i try to use itunes again and i couldnt open it...same as app store...please help me to solve my problem...thanks and god bless...

    Thanks Jakob. You are correct.
    I just finished another "experiment".
    I transcode the whole clip 1,2,3,4,5,6,7 to another ext Western Digital HDD and got the Error -50 too. Problem is this ext Western Digital HDD is Daisy chained to the LaCIe.
    So, I tried transcoding to another ext Western Digital HDD connected to my router. And this time NO PROBLEM.
    So, I should readjust the FW800 connectors.
    What do you mean by the controller of the Firewire ?
    Thanks
    Jakob Peterhänsel wrote:
    All I'm saying is, the error -50 from the Finder normally means there is something spooky going on.
    Here, the LaCie drives become unstable. In the few cases where I'v actually opened the cage and put the HDD into another mount, the HDD seems to be fine, so I suspect it's either the FW connectors of the controller itself.
    If the drive is under warranty, replace it, otherwise, move your data to another drive if it startes to do so frequently.
    Here, the drive will 'behave' normally for some time after a reboot of the OS, but it's a pain to reboot every X hours...

  • How to solve sync problem between Outlook calendar and iPhone when reminder is set to _some_ non-standard values?

    Hi,
    I am having a sync problem between my iPhone/iPad and Outlook calendar events (Outlook 2010).
    Here is the description of the problem:
    1. In Outlook - please create a new event/appointment (e.g. "Test").
    2. Reminder is set by default to 15 minutes. You can change it by using a dropdown menu - please select: "0,5 days".
    3. Click on "0,5 days" and change it manually to "14,5 days".
    4. Click on "Save & Close".
    5. (Do not snooze or dismiss the reminder.)
    6. Sync with your iPhone/iPad.
    7. Open this new event on iPhone/iPad - you can see that alert is set to "15 minutes before" instead to a correct value that was set in Outlook.
    The same problem can be seen if you set the reminder to e.g. "3 weeks" (standard value is "2 weeks").
    However, it is interesting that non-standard values like "1,5 days" (and all other until "13,5 days") are synced without any problem.
    Does anyone have a solution how to solve this problem (different than the trivial solution of not using those strange values)?
    Thanks!

    Thanks to another post (https://discussions.apple.com/message/17501071#17501071) I reset the sync history, here is what to do: 
    Launch iTunes.
    Before you hook up your iPhone to the PC and iTunes do this: Go to iTunes Edit menu > Preferences… > select the iPhone > click the Reset Synch History button > click OK.
    Connect the iPhone to the PC and let iTunes recognize it.
    In the top right corner is the iPhone icon, click on the left side of the iPhone icon > the iPhone menu launches.
    In the menu along the top click on Info > make your selections > click Sync button > it gives you a dialog at the top with the steps it’s going through during the sync.
    In the top left of the iTunes app > click Exit.

  • [SOLVED] Gnome problems still here, nautilus, and no regular session

    After updating today I now I can't open a normal gnome session- only a failsafe session. the ~/.xsession errors show:
    /etc/gdm/Xsession: Beginning session setup...
    /etc/gdm/Xsession: ssh-agent not found!
    /etc/gdm/Xsession: Setup done, will execute: gnome-session
    gnome-session[10497]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
    gnome-session[10497]: CRITICAL: dbus_g_connection_get_connection: assertion `gconnection' failed
    process 10497: arguments to dbus_connection_send_with_reply_and_block() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3298.
    This is normally a bug in some application using the D-Bus library.
    D-Bus not built with -rdynamic so unable to print a backtrace
    gnome-session[10497]: ******************* START ********************************
    gnome-session[10497]: Frame 0: /usr/lib/gnome-session/gnome-session [0x418ab7]
    gnome-session[10497]: Frame 1: /usr/lib/gnome-session/gnome-session [0x418c06]
    gnome-session[10497]: Frame 2: /lib/libc.so.6 [0x7ff6b78ab150]
    gnome-session[10497]: Frame 3: /lib/libc.so.6(gsignal+0x35) [0x7ff6b78ab0c5]
    gnome-session[10497]: Frame 4: /lib/libc.so.6(abort+0x183) [0x7ff6b78ac5e3]
    gnome-session[10497]: Frame 5: /usr/lib/libdbus-1.so.3 [0x7ff6ba383675]
    gnome-session[10497]: Frame 6: /usr/lib/libdbus-1.so.3 [0x7ff6ba37f4ed]
    gnome-session[10497]: Frame 7: /usr/lib/libdbus-1.so.3(dbus_connection_send_with_reply_and_block+0x12f) [0x7ff6ba3693bf]
    gnome-session[10497]: Frame 8: /usr/lib/gnome-session/gnome-session [0x411cbc]
    gnome-session[10497]: Frame 9: /usr/lib/gnome-session/gnome-session [0x411dc0]
    gnome-session[10497]: Frame 10: /usr/lib/gnome-session/gnome-session [0x419d90]
    gnome-session[10497]: Frame 11: /usr/lib/gnome-session/gnome-session [0x41a26f]
    gnome-session[10497]: Frame 12: /lib/libc.so.6(__libc_start_main+0xe6) [0x7ff6b7897546]
    gnome-session[10497]: Frame 13: /usr/lib/gnome-session/gnome-session [0x40ad59]
    gnome-session[10497]: ******************* END ****************
    This happened before and after I added the line
    "AutostartCondition=GNOME /apps/nautilus/preferences/show_desktop"
    to /usr/share/applications, and changed X-GNOME-AutoRestart=true to =false as a workaround to the nautilus respawning problem here http://bbs.archlinux.org/viewtopic.php?id=69219 .
    BTW, it stopped the respawing, but Nautilus now will not launch either from menus or command line.  I get this at command line:
    [wrc@myhost ~]$ nautilus
    (nautilus:10655): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.HalVolumeMonitor is not supported
    (nautilus:10655): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.GPhoto2VolumeMonitor is not supported
    ** (nautilus:10655): WARNING **: Cannot connect to DBus Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
    process 10655: arguments to dbus_connection_send_with_reply_and_block() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3298.
    This is normally a bug in some application using the D-Bus library.
    D-Bus not built with -rdynamic so unable to print a backtrace
    [wrc@myhost ~]$
    Last edited by wrc1944 (2009-04-07 14:29:37)

    OK- I think I've SOLVED all my Nautilus problems, which included the endless respawning "Starting Filemanager windows" on the panel, the hal daemon related GDM 3 for 1 key repeat prevents login problem, and the Nautilus refusing to launch problem!
    After reviewing the Gentoo Hal documetation, and realizing I had the xf86-input-evdev driver installed on Arch, I had forgotten that in order to get the mouse/keyboard to function I had to previously add a line in xorg.conf that was now conflicting with hal/dbus and the new xorg server version.
    I just commented out this line in xorg.conf, like this
    Section "ServerFlags"
    # Option "AllowEmptyInput" "false"
    Option "DontZap" "false"
    EndSection
    and added the hal daemon (which calls dbus) to my /etc/rc.conf, which allows evdev/hal/dbus to do it's thing.
    Along with the edits to the /usr/share/applications/nautilus.desktop file (which is strangely named "File Manager" in Thunar, one of three files of the same name).  The edits made are:
    X-GNOME-AutoRestart=false    # changed from =true
    AutostartCondition=GNOME /apps/nautilus/preferences/show_desktop    # added this line
    Now, I can boot from GDM into a normal gnome session, and Nautilus launches normally, without endlessly repawning itself in the panel.
    The fix itself was quite simple, but tracing the cause down and understanding it was not!
    Last edited by wrc1944 (2009-04-07 06:27:21)

  • [SOLVED] Routing problems with ssh server and openvpn client

    My current setup is an arch box behind my wireless router.  My wireless router is running scripts to update the dynamic dns for my internet connection and forwarding incoming requests to port 22 on the arch box.  Simple so far.
    Now I'd like to setup OpenVPN on the arch box to connect to a 3rd party vpn service but still listen for ssh connections.  This way I can have my arch box always connected to the vpn but be able to access it from anywhere.  I believe the problem is that openvpn sets up a default route to send all outgoing traffic out over the tunnel, but I don't know enough about routing to make this work.  I saw another solution in the forum was running virtualbox and I find that so inelegant.  I'm planning on eventually learning more about ip route and iptables but I was also hoping that a networking guru could help me get this set up quickly in the meantime.
    ip route while not connected to vpn
    default via 192.168.1.1 dev eth0 metric 202
    192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
    ip route while connected to vpn
    0.0.0.0/1 via 10.120.62.9 dev tun0
    default via 192.168.1.1 dev eth0 metric 202
    10.120.62.1 via 10.120.62.9 dev tun0
    10.120.62.9 dev tun0 proto kernel scope link src 10.120.62.10
    23.29.126.102 via 192.168.1.1 dev eth0
    128.0.0.0/1 via 10.120.62.9 dev tun0
    192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
    Last edited by ricka (2012-11-05 17:14:48)

    First, meop, thanks for your reply.  I did not use that method to solve the issue, but I'm going to do some more research into it (I'll speak to why I went another direction after the solution).
    My solution so far has come from this resource http://forum.linode.com/viewtopic.php?t=8737
    Since my server is behind a router, I do not have to worry about the public IP address changing and I was able to use the private IP in the route statements.  Therefore, in my case, the solution was these three lines:
    ip rule add from 192.168.1.11 table 128
    ip route add table 128 to 192.168.1.0/24 dev eth0
    ip route add table 128 default via 192.168.1.1
    Keep in mind, as the article states, that applies to all ports (not just ssh).  If you want to block other traffic, you need some extra iptables entries.
    This also solves my end goal: Being able to connect to this 3rd party VPN with a simple ssh redirect from my always connected server.  I can now ssh -D <port> <myhost>, set up chrome to use <port> as a proxy, and have everything redirecting over this VPN connection without any hassle.
    meop, this setup is connecting to a 3rd party VPN service and they provided the config scripts for the client.  I considered tinkering with that, but found this solution to work and I'm going to do some more reading about each solution to figure out which is the best overall.
    enovak, I grepped dmesg and did not see any entries about martian source.
    Now another question that comes to mind:  What if this server were actually NOT behind a firewall and it's public IP changed?  I think you'd somehow have to have a script to check to see if your Dynamic IP address changed and also have a route that only that script would use (send everything else out the VPN route).  Then, if your IP address changed, you'd have to change these routes around.  I'll leave that solution to someone else :-)

  • [SOLVED] [lxc] Problems with archlinux template (and systemd)

    Hello, recently I was pointed to lxc. I tried the archlinux and debian templates (ubuntu and fedora doesn't work because the "arch" command cannot be found but curently I don't care about these templates).
    The debian template seems to work just fine but the archlinux template doesn't.
    I think the main problem is that the arch-system runs with systemd while debian still uses initscripts. I found some resources saying that systemd does not work within a lxc-container while others say that some modifications have to be done in order to make systemd to work properly. But all modifications (I found) that should be made are already included in the archlinux template. But it is still not working for me. :-(
    The output is as follows:
    # sudo lxc-start -n test-arch
    systemd 203 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Detected virtualization 'lxc'.
    Welcome to Arch Linux!
    Set hostname to <test-arch>.
    [ OK ] Reached target Remote File Systems.
    [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
    [ OK ] Listening on Delayed Shutdown Socket.
    [ OK ] Listening on Journal Socket.
    Starting Journal Service...
    [ OK ] Started Journal Service.
    [ OK ] Reached target Paths.
    [ OK ] Reached target Encrypted Volumes.
    Starting Setup Virtual Console...
    [ OK ] Reached target Swap.
    Starting Remount Root and Kernel File Systems...
    Mounting Temporary Directory...
    systemd-journald.service: main process exited, code=exited, status=219/CGROUP
    Unit systemd-journald.service entered failed state.
    systemd-vconsole-setup.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Setup Virtual Console.
    See 'systemctl status systemd-vconsole-setup.service' for details.
    Unit systemd-vconsole-setup.service entered failed state.
    systemd-remount-fs.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Remount Root and Kernel File Systems.
    See 'systemctl status systemd-remount-fs.service' for details.
    Unit systemd-remount-fs.service entered failed state.
    tmp.mount mount process exited, code=exited status=219
    [FAILED] Failed to mount Temporary Directory.
    See 'systemctl status tmp.mount' for details.
    Unit tmp.mount entered failed state.
    [ OK ] Reached target Local File Systems (Pre).
    [ OK ] Reached target Local File Systems.
    Starting Trigger Flushing of Journal to Persistent Storage...
    Starting Recreate Volatile Files and Directories...
    Starting Load Random Seed...
    systemd-journal-flush.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Trigger Flushing of Journal to Persistent Storage.
    See 'systemctl status systemd-journal-flush.service' for details.
    Unit systemd-journal-flush.service entered failed state.
    systemd-tmpfiles-setup.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Recreate Volatile Files and Directories.
    See 'systemctl status systemd-tmpfiles-setup.service' for details.
    Unit systemd-tmpfiles-setup.service entered failed state.
    systemd-random-seed-load.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Load Random Seed.
    See 'systemctl status systemd-random-seed-load.service' for details.
    Unit systemd-random-seed-load.service entered failed state.
    [ OK ] Reached target System Initialization.
    [ OK ] Reached target Timers.
    [ OK ] Listening on D-Bus System Message Bus Socket.
    [ OK ] Reached target Sockets.
    [ OK ] Reached target Basic System.
    Starting D-Bus System Message Bus...
    [ OK ] Started D-Bus System Message Bus.
    Starting Login Service...
    Starting Permit User Sessions...
    systemd-journald.service holdoff time over, scheduling restart.
    [ OK ] Stopped Trigger Flushing of Journal to Persistent Storage.
    Stopping Journal Service...
    [ OK ] Stopped Journal Service.
    Starting Journal Service...
    [ OK ] Started Journal Service.
    Starting Trigger Flushing of Journal to Persistent Storage...
    dbus.service: main process exited, code=exited, status=219/CGROUP
    Unit dbus.service entered failed state.
    systemd-logind.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Login Service.
    See 'systemctl status systemd-logind.service' for details.
    Unit systemd-logind.service entered failed state.
    systemd-user-sessions.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Permit User Sessions.
    See 'systemctl status systemd-user-sessions.service' for details.
    Unit systemd-user-sessions.service entered failed state.
    systemd-journald.service: main process exited, code=exited, status=219/CGROUP
    Unit systemd-journald.service entered failed state.
    systemd-journal-flush.service: main process exited, code=exited, status=219/CGROUP
    [FAILED] Failed to start Trigger Flushing of Journal to Persistent Storage.
    See 'systemctl status systemd-journal-flush.service' for details.
    Unit systemd-journal-flush.service entered failed state.
    Starting Getty on tty1...
    [ OK ] Started Getty on tty1.
    Starting Console Getty...
    [ OK ] Started Console Getty.
    [ OK ] Reached target Login Prompts.
    [ OK ] Reached target Multi-User System.
    I created the container with
    sudo lxc-create -t archlinux -n test-arch
    and did nothing more because it seems to me that nothing more should be needed.
    I read a lot and most readings say that one has to use initscripts because systemd is not working while others say systemd is working with modifications, e.g. https://wiki.archlinux.org/index.php/Lxc-systemd
    But above is everything I get, no login-prompt or anything else, it just hangs. Trying to invoke "lxc-stop -n test-arch" initiates the shutdown but then both terminals just hang and I have to kill the lxc-start process.
    I would like to know:
    1. is it possible to run a container with systemd? Or do I have to use initscripts?
    2. are there any modifications I have to do besides the modifications already provided by the archlinux template script (in order to use systemd)?
    3. what possibilities do I have to see what's missing or configured wrong?
    Thank you very much. ;-)
    // Edit:
    Ok, sorry for the noise.
    As a last chance I tried a fresh Arch installation within a VM and that works fine (I should have tried this first :-( ). It turned out that my problem is that I am running the ck-kernel which lacks support for "Cgroup sched" and "Cgroup cpu account".
    I will ask the ck-guy to support these options.
    Until then I will have to use the kernel from the core-repo.
    Last edited by m4ntiz (2013-05-20 12:38:52)

    Yes, that was it. Sometimes I don't see what is right in front of me. The devices work as expected, thank you Strike0.
    I have one question left. Now wifi and ethernet connection are established during boot (whenever possible). Is there a way to establish connections on demand? Is it possible to trigger the netcfg profile "ethernet-dhcp" when the cable is plugged in or "wireless-wpa" when in range?

  • [SOLVED] a problem with gpg-agent and ssh keys

    I'm baffled by a strangle problem:
    My setup is as follows: I use gpg-agent with --enable-ssh-support, so that my ssh keys are handled by it. All was fine (when I ssh'ed to another machine, a pinentry window popped up, asked for a password, and if I entered the correct one, gpg-agent would decrypt its copy of my private ssh key and use it for identification). But: I needed to change my ssh key, and so I generated a new one. Next, I ssh-add'ed it to gpg-agent (one password to decrypt the private key, then twice another password for gpg-agent). I uploaded the public key to a server. The setup should be complete.
    The problem is that when I ssh to a machine, a pinentry window comes up, but it does not accept my password (the one that I entered twice when ssh-add'ing the key). I tried adding with various different passwords (always deleting ~/.gnupg/private-keys-v1.d/*, since 'ssh-add -d ~/.ssh/id_rsa.pub' would not work for some reason - it would not make gpg-agent forget the key), different pinentry programs ( -qt4, -gtk-2, -curses), and still the same problems. Pinentry itself seems to work fine, since if I enter two different things when it asks for a new passphrase for the key, it detects that there's a problem.
    So, can anyone help? What could I try (please don't post just to say that I could/should use ssh-agent, or keychain, or anything else. I have used various things, and I like this setup the most. It worked before, and I would like to find out why it stopped working and how to get it back to speed.)
    Thanks.
    Last edited by bender02 (2010-02-15 09:52:54)

    Thats a known bug with the new gpg version.
    http://lists.gnupg.org/pipermail/gnupg- … 38045.html
    You could use an older version of gpg or use a development version.

  • Easier and better ways to solve current problems with Acrobat?

    Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
    Regards,
    Marc

    Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
    After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
    Regards,
    Marc
    Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
    Re: Easier and better ways to solve current problems with Acrobat?
    created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
    The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
    Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
    Thanks,
    David
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why SP can't solve language problems SP2013 and SP2013 DESIGNER?

    Hi,
    I cant understand why can't solve languge problems...
    ex: if you user SP 2013 LANGUAGE (TR),SP Designer 2013 Workflows  "Conditions" and "Action" are in same language(tr) but  ı want workflow  "Conditions" and "Actions" are in ENG.
    Why didn't solve this Problem in SP 2013 and SP 2013 Designer? 
    Thanks..

    Hi ali,
    According  to your description, you want that the language of SharePoint Designer 2013 is different from SharePoint 2013.
    You are able to download the language pack of English for SharePoint Designer 2013(Office 2013), and apply it in SharePoint Designer 2013.
    Also, you are able to download the English Version of SharePoint Designer 2013 for implementing your requirement.
    I hope this helps.
    Thanks,
    Wendy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Java Generics in Ejbs WebLogic 9.2 MP1 WindowsXP Sun JDK

    Hi guys,
    I tried to deploy our application on Weblogic Server 9.2 MP1 (Windows, Sun JDK) and during deployment I have this error see bellow.
    Can somebody tell me what is the problem with generics and EJB compiler?
    Is necessary to add any path or change any server settings?
    Thanks for help
    Robert
    location: interface
    ...daoadapter_DaoAdapter_rge4uk_Intf
    public void batchPersist(java.util.List<T> arg0);
    ^
    ...daoadapter_DaoAdapter_rge4uk_Intf.java:20: cannot find symbol
    symbol : class T
    location: interface
    2 errors
    at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:435)
    at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:295)
    at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:303)
    at weblogic.ejb.container.ejbc.EJBCompiler.doCompile(EJBCompiler.java:309)
    at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:497)
    at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:464)
    at weblogic.ejb.container.deployer.EJBDeployer.runEJBC(EJBDeployer.java:430)
    at weblogic.ejb.container.deployer.EJBDeployer.compileJar(EJBDeployer.java:752)
    at weblogic.ejb.container.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:655)
    at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1199)
    at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:354)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
    at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
    at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:147)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperatio
    n.java:189)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:87)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:718)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1185)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:247)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:15
    7)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(Deploymen
    tReceiverCallbackDeliverer.java:157)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiv
    erCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCal
    lbackDeliverer.java:45)
    at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

    Thanks Matt for your answer.
    But I don't finish my testing :)
    I tried to deploy the same application on Weblogic 9.2 MP2 and then MP3 (sun jdk domain) and I didn't have problem with generics (application was correctly deployed and running).
    Then something was fixed in newer versions or may be bea guys support more then is in EJB 2.x specification.
    My next step, I'll try to deploy it on Jrockit domain and I give a note to conference what happen, may be it can help to somebody else.
    Thanks
    Robert

  • [SOLVED] Installation problem with pacstrap

    Hi guys, I am a new user of Arch Linux.
    I wanted to try this operating system then I decided to install that on my Asus F200MA. Unfortunately, when I try to install ArchLinux, I get an error while downloading the base packages with pacstrap.
    My HDD is made by 3 partitions:
    /dev/sda1 - 51200 MB: This is the root partition
    /dev/sda2 - 411690 MB: This is the home partition
    /dev/sda3 - 4096 MB: This is the swap partition
    After mounting these partitions, after using the pacstrap command and after the end of the download process, I get a few error messages:
    error: failed to commit transaction (invalid or corrupted package)
    Errors occurred, no packages were upgraded.
    ==> ERROR: Failed to install packages to new root
    I really can't understand the reason of these errors, how can I solve the problem?
    For formatting and mounting the partitions I used these commands:
    # mkfs.ext4 /dev/sda1
    # mkfs.ext4 /dev/sda2
    # mkswap /dev/sda3
    # swapon /dev/sda3
    # mount /dev/sda1 /mnt
    # mkdir /mnt/home
    # mount /dev/sda2 /mnt/home
    and then I used this command:
    pacstrap /mnt base base-devel
    Photo of the errors: http://i.imgur.com/4BRhlC7.jpg
    P.S.: Can you also explain me the reason of the signature's errors?
    Thanks for all
    Last edited by xRedFox (2015-04-10 21:59:20)

    Do you use the most recent installation disc image?

  • When i go to new sms typing their is always show a text, how can solve this problem?

    when i go to new sms typing their is always show a text, how can solve this problem?

    Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
    (95675)

  • Itunes in my mac and itunes in my mac book pro do not share the same number of songs, isn't icloud and match supposed to solve that problem?

    My itunes library in my mac and mac book pro are not the same, depending on which machine I loaded the music on.  Isn't icloud and match supposed to solve that problem?

    wolverine76 wrote:
    Isn't icloud and match supposed to solve that problem?
    Um, not really. What are you trying to accomplish?

  • Why is the sound of my new ipad cutting out intermittently and what does Apple recommend to solve the problem in lieu of any updates?

    Why is the sound of my new ipad cutting out intermittently and what does Apple recommend to solve the problem in lieu of any updates? All of a sudden without changing any settings, the audio on my NEW ipad cuts in and out on applications/ games, keypad noise and lock sounds. The rocker button only seems to work while the sound is intermittently being heard before, after a few seconds of noise not doing anything when sound goes off.
    This is highly frustrating as I've noticed others posting about such issues as far back as April. Anybody had the same thing happen to them? Is this likely software (ios6) or hardware issue? What are the solutions Apple???

    Apple has no physical stores of their own in Dubai, so unless you mean that you purchased from the online Apple Store for the UAE, you purchased from a dealer, who may or may not have been authorized. You can check the expiration date of the warranty on your iPad yourself by entering in the serial number here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    If it does indeed show the warranty has expired, then what you need to do from here will depend on who you purchased the iPad from and when you really did purchase it. Perhaps you actually purchased it in August and are just misremembering? Check your receipt. If you confirm that you did purchase within the last calendar year, tell us exactly where you got it and we can probably offer advice.
    Regards.

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

Maybe you are looking for