[SOLVED]error: attempt to read or write outside of partition

Hello, I update my system at least once a week, sometimes I run pacman -Syu more than that. So this system is no more than about 7 days behind what is available today. Last time I did this the kernel got updated and it updated itself again or at least it just ran mkinitcpio, also my passwd and group changed, anything that was not represented in the pacnew version got a representation, this last one mainly featured a lot of changes to "/usr/bin/nologin" from the login false version, whatever it was, nothing that looks too fussy.
Reboot just to see what will happen and I am greeted with this:
Booting `Arch Linux, with Linux core repo kernel'
Loading Linux core repo kernel ...
error: attempt to read or write outside of partition
Loading initial ramdisk ...
unaligned pointer 0x1d
Aborted. Press any key to exit.
I happen to have a usb drive that has Arch Linux 3.11.6.-1-ARCH, so I put that in and get an environment I can work with. Chroot in and so I can run mkinitcpio -p linux, thinking that that is the problem, some error in the kernel, I actually end up using the command
# /usr/lib/modules
, since
# mkinicpio -p linux
won't run, it gives:
==> Building image from preset: /etc/mkinitcpio.d/linux.present: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux.img
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux-fallback.img -S autodetect
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
However,
# mkinitcpio -g /boot/linux.img -k 3.14.6-1-ARCH
will. Everything finishes with a success, exit out, reboot and bam, same message, so it is not the kernel at least not on its own. Here is what my fstab looks like:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda3
UUID=4dbfa319-4f88-49c1-a595-27faabfe4f57 / ext3 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=4C05-1A6B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# /dev/sda4 LABEL=home
UUID=bff35508-596c-4d7c-a983-b6b0ddc4f6e2 /home ext3 rw,relatime,data=ordered 0 2
# /dev/sda2
UUID=e87030ad-3226-41e3-938a-5be3351e34ed none swap defaults 0 0
#efivars
efivarfs /sys/firmware/efi/efivars efivarfs defaults 0 0
#MySQL, linux version
tmpfs /var/lib/mysqltmp tmpfs rw,gid=89,uid=89,size=100m,mode=0750,noatime 0 0
and my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
While I am here I might as well ask this is this an appropriate boot structure?
/boot/
>>>>/EFI/
>>>>/>>>/grub/
>>>>/>>>/>>>>grubx64.efi
>>>>/grub
>>>>/>>>>/fonts
>>>>/>>>>/grub.cfg
>>>>/>>>>/grub.cfg.example
>>>>/>>>>/grubenv
>>>>/>>>>/local
>>>>/>>>>/>>>>/*.mo files
>>>>/>>>>/themes/
>>>>/>>>>/>>>>>>/starfield/*.png *.pf2 files
>>>>/>>>>/x86_64-efi
>>>>/>>>>/>>>>>>>/ *.mod files
>>>>/initramfs-linux-fallback.img
>>>>/initramfs-linux.img
>>>>/linux.img
>>>>/vmlinuz-linux
Anyone have any ideas on what I can do to get my system back?
Last edited by Never (2014-06-11 03:17:24)

Inside of my rescue disk I get:
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0005,0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* arch_grub
Boot0004* ATAPI CD-ROM Drive
Boot0005* grub
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
my /dev/sda1 was /boot/ not /boot/efi, so I made that change, allowing /boot on / [/dev/sda3] to now be populated with part of the stuff on /dev/sda1 and /dev/sda1 would just have /boot/efi/, instead of all of boot, then ran:
# modprobe -r efivars
# umount /sys/firmware/efi/efivars
# modprobe -r efivarfs
# modprobe efivarfs
# mount -t efivarfs efivarfs /sys/firmware/efi/efivars
# efivar -l
returned a bunch of variables
# grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=grub --recheck --debug
# grub-mkconfig -o /boot/grub/grub.cfg
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* grub
Boot0004* ATAPI CD-ROM Drive
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
arch_grub, whatever that was, went away. Pull out of arch-chroot, unmount sdaXs, reboot and:
ERROR: No boot disk has been detected or the disk has failed.
An extensive hp diagnostic check reveals... Nothing wrong.
A reboot and removal of all data written in /dev/sda1 and /dev/sda3/boot sectors reveals:
# mkdir /boot/efi/123
mkdir: cannot create directory /boot/efi/123: Cannot allocate memory
Which persist even on a restart and trying to mkdir into /mnt/arch/boot/efi/EFI while outside of arch-chroot. No idea why that is happening, oh well.

Similar Messages

SSRS 2008 R2 - on Preview report in report builder itself, getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". Any Suggestions please to resolve it?

Hi,
I am working on SSRS 2008 R2. On Preview report in report builder itself, i am getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
See my below screen shoot.
Any Suggestions please to resolve it?
thank you in advance !
best regards,
Venkat,
[email protected]

Hi Venkat,
According to the error message, I guess that the error occurred when you previewed the report in Business Intelligence Development Studio (BIDS).
Based on my research, I think it may be a Window Layout issue of Visual Studio. Please try the steps below:
Click “Window” button from the toolbar ribbon.
Click “Reset Windows Layout” option.
Click “Yes” to finish the operation.
The following thread is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/90949d68-a611-467c-b438-be97b8ab250b/attempted-to-read-or-write-protected-memory-this-is-often-an-indication-that-other-memory-is
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error "Attempted to read or write protected memory"

When I started using Microsoft Visual 2008, he began appearing this error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt" and not know what could be.
To debug the program the error occurred after executing the line:
objBP = (BusinessPartners)objCompany.GetBusinessObject(BoObjectTypes.oBusinessPartners)
Does anyone know what might cause this error?

I isolated the piece of code for testing:
private void button5_Click(object sender, EventArgs e)
            try
                if (objCompany.Connected) {
                   objSBOBob = (SBObob)objCompany.GetBusinessObject(BoObjectTypes.BoBridge);
                   objRecordset = (Recordset)objCompany.GetBusinessObject(BoObjectTypes.BoRecordset);
                   objBP = (BusinessPartners)objCompany.GetBusinessObject(BoObjectTypes.oBusinessPartners);
                   objRecordset = objSBOBob.GetBPList(BoCardTypes.cSupplier);
                   objBP.Browser.Recordset = objRecordset;
            catch (Exception er)
                MessageBox.Show(er.Message);
And the variables:
private BusinessPartners objBP = null;
        private Recordset objRecordset = null;
        private SBObob objSBOBob = null;

Stock Audit Trail Report Error - Attempt to read or write protected memory.

Hi,
I have a customer running on
1. SQL 2008 SP2
2. SAP B1 8.8 PL21
After the Stock Audit Trail report is run, on the output screen, when i try to click on any of the "Golden Arrow" to drill down, i get an error message on the bottow of the screen that says
"[ItemEvent]: Attempt to read or write protected memory. This is often an indication that other memory is corrupt."
I get this error on workstations as well as servers. What could be wrong and what should i do?
Thanks,
Taw-Fey, Tan

Hi Taw-Fey,
Check your demo database to see if you get the same error. If not, something is wrong in your live db. You need at least DBCC to check.
Thanks,
Gordon

Error: Attempted to read or write protected memory. Memory is corrupt

2005A SP1 PL4
I have added a user field with B1 in Items with success.
Therefore I have started the addon and I have the following error at SAPbouiCOM.SboGuiApiClass.Connect(String ConnectionStr):
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt"
I have restart B1, and I have restart the PC, but the problem persist.
Before I added user field, the addon worked
Now if I open items system form, the user field not exists , not even I press CtrlShiftU
It seems that the user fields are not record correctly
Now I re-add a new second user field in items. Now there are all user fields in system form Items, but i have the same error with my addon.
This is the second company that occorr this problem
Is this a 2005A SP1 PL4 problem? Must I convert the company to 2005A SP1 PL11? Or are there other solution?
Help me
Thank you

I would strongly recommend to go up to PL11 - and then re-check the issue.
If it still doesn't work:
The minimum information to provide here would be the definition of the UDF! Since UFDs work in general there must be some issue with your specific UDF (or some combination of settings).
Check table CUFD + the actual definition of the UDF in the SQL table as well.
...or just involve SAP Support...
HTH,
Frank

Error "Attempt to read or write protected memory" in MAS

Hello,
I am always getting the error message "Attempt to read or write protected memory. This is often a indicator that other memory is currupt" as soon as I try to add a new Method to a BO. What I do is
1) Open BO in Code Mode
2) Open Tab "Document Outline" ; right click on Method and "New.."
3) I enter the Method name i desire "Z_CPB_RetrieveStockInfo"
4) I enter the specific signature i need "Public Function Z_CPB_RetrieveStockInfo( ByRef Sfmara As String) As Object"
5) I press ok and get the error message in the first popup.
6) I get another error Popup "Cannot open the code window. Reason: The object may have been deleted from the Changelist"
The method "Z_CPB_RetrieveStockInfo" listed in the "Document Outline" Tab below Methods, but not in the selection box above the code. If I restart MAS I can see the method in the code and in every selection box. It is also possible to enter the code into the method, but as soon as I saved and restarted the machine, the code is gone and the method body is empty again.
Does anyone know what's going wrong?
Regards,
Andreas

Hi,
this is a well-known issue, you can check here for more information
[MAS and Attempted to read or write protected memory.]
Regards,
Wolfhard

[SOLVED] Grub Error "Read or write outside of disk hd0"

Trying to install Arch Linux (as per client request) on an old Seagate Mirra Personal Server. I reflashed the bios to get rid of the Seagate modified ROM and put the standard, stock, VIA bios image on there. Everything boots fine, it boots windows fine. But when I install Arch Linux on the drive and try to boot, it errors out with
Booting...
GRUB Loading.
Welcome to GRUB!
error: attempt to read or write outside of disk 'hd0'.
Entering rescue mode...
grub rescue>
When I ran grub-install and grub-mkconfig during installation neither reported errors or warnings. I'm open to ideas but I need to fix this sooner rather later as this is for a client. A forum thread I found in regards to Ubuntu and grub error 18 said to run:
apt-get remove linux-server
apt-get install linux-386
under Ubuntu and then it would boot. I know Arch removed i386 support a few months ago but im finding it hard to believe that the error above is because of an architecture mismatch. Also I didnt think the CPU in this thing was that old. Hardware Info from the arch live cd says
CPU Vendor: Centaur
CPU Model: VIA Nehemiah
1 core, 64k L2 Cache, 32bit
the Mirra is from 2007 or so, so I expected i686 Arch to be just fine for it.
Ideas???
EDIT:
Wikipedia's Article: https://en.wikipedia.org/wiki/VIA_C3
States: "Additionally, it implemented the cmov instruction, making it a 686-class processor"
So it shouldn't be an issue of i386 vs i686, right?
Last edited by FathisAeril (2013-04-26 21:46:11)

Good morning to all of You.
Sorry for posting in a [SOLVED] thread but I find the info that I am about to add relevant and I am betting my vital organs that someone else might find it interesting too.
I did an upgrade last night on my Thinkpad 600E. I was not upgrading it for several days (2 weeks tops) as I lost my USB wifi card and had no internet access on this particular machine. So...
As always before upgrade I checked my rss reader for news and sure enough there was a very informative post from Allan (thanks Dude btw.) in there:
https://www.archlinux.org/news/binaries … ervention/
I did as I was told and upgraded in the indicated way. All was peachy till I rebooted to get new kernel to load. I was met with the mentioned error:
error: attempt to read or write outside of disk 'hd0'.
but the second part was slightly different.
Error: You need to load kernel first
SO since the error was different why am I posting here? Because even after Googling the whole error message this post was the first to come up in my search results so I am betting others will get here as well.
Solution? After an hour or so of fighting (I tried booting up from the Arch CD and fscking partitions, reinstalling / reconfiguring grub, downgrading grub-bios and grub-common packages and many many other things) I finally rebooted to the Arch cd, chrooted (for all those that do not know what that means I would like to recommend this link as chrooting is explained in it https://wiki.archlinux.org/index.php/Be … %27_Guide) to the installation and I have reinstalled the linux (kernel) package and redid the image with the:
mkinitcpio -p linux
and rebooted. Turns out that did the trick. Apparently something went wrong during the kernel upgrade. Possibly due to the changes explained in Allan's article. Reinstalling kernel / recreating image did the trick for me.
So if You are still wondering what am I doing here and why am I replying in this thread - the answer is - 99% search results from Google suggests that this error means incompatibility between bios and the hard drive AND there is nothing really out there that I found helpful in this case. I mean it could not be a bios / hdd incompatibility. This drive has been used in this machine for few years and it was running Arch since November 2012... so this just could not be the case. I am just giving a shout to all those that will get this error that there is another option too.
Kind regards. Thanks for reading. My apologies again for sticking my nose in.
Andrzej
Edit: Few months later the same error - fix does not work... Trying to figure it out...
Last edited by AndrzejL (2013-10-19 02:43:15)

Error Connecting Addon. Attempted to read or write protected memory

Hi All
I m trying to connect company database.....
while doing
ocompany.connect()
i m getting following error
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
how should i solve this????
Thank you

Rajesh - this question has already been asked and aswered.
Search the forum for "protected memory".
Here's the solution:
Error when install addon

"Attempted to read or write protected memory" error in loading a report.

Development Environment
===
Windows XP
Visual Studio 2008 Pro; with Crystal Reports 2008 for Visual Studio
TagetCPU: 'AnyCPU'
VB.net 3.5
Windows dll
Crystal Reports Runtime SP2 (12.2.0.290)
Deployment Environment
===
Windows XP
.net3.5
Crystal Reports Runtime SP3 (no be confirmed)
I have created a windows dll with a form with a reportdocument, that loads a report (CrystalDecisions.CrystalReports.Engine.ReportDocument).
Then we circle through the report setting every table location to point at a specific ODBC and database.
The Dll can do this process several hundred reports in a day. However a small number (less than 10) of these have the following error:
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
This is normally occurring when the reportDocument.Load function is called. But also happens when going through the setting of table locations: [myTable.ApplyLogOnInfo(TmpTableLogOnInfo)
The dll is called via COM interop and so i have checked "Register for COM interop".
Simon@Sanderson

1) Get to SP 3:
for dev computer:
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
Recompile the app after SP3 is applied.
for SP3 runtime:
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100007123582010E/cr2008sp3_mm.zip
(You will have to uninstall SP 2 runtime before installing SP 3 runtime)
2) Do not use "Any CPU". CR2008 is only 32 bit anyhow so use 32 bit.
3) Make sure you are using .Close and .Dispose once you are done with each report object
- Ludek

System.AccessViolationException:Attempted to read or write protected memory

Hi,
I am using Asp.net with oracle 10 g in my application , it is working perfectly in my machine. i have installed Oracle 10 g in my machine. but i did not installed oracle 10 g in server
but i am running an application from the server. i got this Error:
Attempted to read or write protected memory.This is often an indication that other memory is corrupt.
Please Help me.
Thanks.

Hi,
try to set the
ProxyCreationEnabled property of dbContext is set to true.

Attempted to read or write protected memory, VS2008.

Development Environment
===
Windows XP (32bit)
Visual Studio 2008 Pro; with Crystal Reports 2008 for Visual Studio
TagetCPU: 'x86'
VB.net 3.5
Windows dll
Crystal Reports Runtime SP3 (12.3.0.601)
Deployment Environment
===
Windows XP (32bit)
.net3.5
Crystal Reports Runtime SP3 (12.3.0.601)
We have a dll that prints a batch of reports. There are only three different reports but each is repeatedly printed with different parameters. The first time each report is called it is loaded (myReport.Load) and each table location is set. (myTable.Location = "mydb.dbo.mytable")
A few hundred of these can be printed every day. Approximately once a day we can get the following error:
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
This only happens on the deployment machine. It might be hard to run the Process Manager on the deployment machine as this error varies the time it occurs and seems quite intermittent.
Once all the reports have printed we call a '.close' and '.dispose' on each report.
This error was also happening when we had the runtime 12.0.(SP1).
The error seems to happen mostly at:
myReportDocument.PrintToPrinter(1, False, 0, 0)

Hello Simon
A few suggestions.
Get SP4:
SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
SP4 MSI
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
SP4 MSM
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
See if there are any updates for the printer driver.
Try a different printer driver.
See if there are updates for the DB client (e.g.; it may actaully be the DB client eating up the memory).
Check the Event Log for any warnings \ errors.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Attempted to read or write protected memory in VS2010 when i click the prin

hi
i can see the report in the Crystal Report Viewer
but when i click on the print button i am geting this error message :
Crystal Report Viewer printing error
(Attempted to read or write protected memory. This is often an indication that other memory is corrupt).
in some computers it working fine but in some i get this meesage
the problem is when i click the print button
maybe in x64 windows 7 pc the crystal report x64 is installed and the x86 install also the problem occur
i dont know what to do
i need solution
thanks ...

OS Wind 7 32 bit
VS 2010
SAP crystal for 2010 net
i search about this problem but i don't see any solution

Attempted to read or write protected memory while adding an existingMessage

Hi,
does anyone know what the reason for this exception might be?
24.11.2009 16:23:04 Error Attempted to read or write protected
memory. This is often an indication that other memory is corrupt.
at System.RuntimeType.ForwardCallToInvokeMember(Strin g memberName,
BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData&
msgData)
at GroupwareTypeLibrary.DIGWMessages.AddExistingMessa ge(String
SenderDisplayName, String SenderEmailAddress, String
SenderEmailAddressType, DateTime CreationDate, MessageBoxTypeConstants
MessageBoxType, MessageStatusConstants MessageStatus,
MessagePriorityConstants MessagePriority, MessageSecurityConstants
MessageSecurity, Object DraftMsg, Object LastModificationDate)
at
com.vivex.archiveconnector.groupwise.GroupWiseInte rfaces.OAPIGroupWise.AddMail(GWMail
message, Mail5 draftmsg)
at
com.vivex.archiveconnector.groupwise.GroupWiseInte rfaces.OAPIGroupWise.AddMessage(GWMessage
message)
at
com.vivex.archiveconnector.groupwise.Agent.Archive Message(GWMessage msg,
User user, Group group, ArchiveSettings archSettings,
GroupWiseArchiveFilter arcFilter)
Best regards, Martin Schmidt.

I don't think this is a GroupWise error.
We would need steps to duplicate the problem.
>>> On Friday, November 27, 2009 at 7:13 AM, Martin
Schmidt<[email protected]> wrote:
> Hi,
>
> does anyone know what the reason for this exception might be?
>
> 24.11.2009 16:23:04 Error Attempted to read or write protected
> memory. This is often an indication that other memory is corrupt.
> at System.RuntimeType.ForwardCallToInvokeMember(Strin g memberName,
> BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData&
> msgData)
> at GroupwareTypeLibrary.DIGWMessages.AddExistingMessa ge(String
> SenderDisplayName, String SenderEmailAddress, String
> SenderEmailAddressType, DateTime CreationDate, MessageBoxTypeConstants
> MessageBoxType, MessageStatusConstants MessageStatus,
> MessagePriorityConstants MessagePriority, MessageSecurityConstants
> MessageSecurity, Object DraftMsg, Object LastModificationDate)
> at
>
com.vivex.archiveconnector.groupwise.GroupWiseInte rfaces.OAPIGroupWise.AddMa
> il(GWMail
> message, Mail5 draftmsg)
> at
>
com.vivex.archiveconnector.groupwise.GroupWiseInte rfaces.OAPIGroupWise.AddMe
> ssage(GWMessage
> message)
> at
> com.vivex.archiveconnector.groupwise.Agent.Archive Message(GWMessage msg,
> User user, Group group, ArchiveSettings archSettings,
> GroupWiseArchiveFilter arcFilter)
>
> Best regards, Martin Schmidt.

Attempted to read or write protected memory calling GetCompanyService() C#

I am getting the error;
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
when running the code;
if (sboCompany.GetCompanyService().GetAdminInfo().RoundingMethod == SAPbobsCOM.BoYesNoEnum.tYES)
// My code here
This is happening on a Terminal server session on Server 2003 R2 Std x64 Edition Service Pack 2 running SAP Business One 2007 A (8.00.232) SP: 01 PL: 07
but works OK on a standard Windows XP Professional 2002 SP3 Machine running SAP Business One 2007 A (8.00.181) SP:00 PL:46
I have managed to resolve this by accessing the Roundmthd field in the OADM table directly using a recordset object, but would like to abe able to use the proper api if possible!
Can anyone help?

Within IF clause, it is better comparing two values indirectly that you have already assigned them to your own variables. try it to see.
Thanks,
Gordon

Attempted to read or write protected memory error

Hello,
I am using the .Net library and occasionally I get a System.AccessViolationException,"Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Currently it is occurring when trying to initialize a TypedTPINIT object (this has happened in other places before and we just retry the request as a work-around). I set the size equal to the password length + 2 and the constructor for TypedTPINIT throws the exception after making the call to tpaloc. I have code that catches the exception and tries again up to 5 times before bubbling the exception up the chain. Once this exception occurs, no calls can be made to tux, they all throw the same exception. Once the application is closed and restarted (restarting the win32 process), everything works fine with the same data. It will work for a day or two and then fowl up again, seemingly at random. I am unable to reproduce the error at will, we just see it popup now and again, but closing the process and restarting it makes it go away for a while.
Any idea why this exception is happening?
I tried taking the .Net library out of the question and make the call to tpalloc myself using p/invoke and the same thing happens, but not every time.
I appreciate any help you can provide.
~Jason

Hi Jason,
I would suggest using a memory access checking tool like bounds checker, electric fence, or the like, although I don't know what's available in a .NET environment.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

[SOLVED]error: attempt to read or write outside of partition

Similar Messages

Maybe you are looking for