[Solved}Error: Unable to initialize gtk, is DISPLAY set properly?
i am using aa software that require root access , but when i run it with root access is shows
Error: Unable to initialize gtk, is DISPLAY set properly?
I am using kde desktop , but when loginas root in kde and run that application it works fine.
i have googled a lot on this but did not find any solution.
Last edited by sanjuchopra (2012-01-19 10:59:39)
You should NEVER login graphically as root. What software do you want to use? Is it REALLY necessary to give it root access=
If you want to run it as root, you should do the following in a terminal:
$ xhost + enable X access from terminals
$ su login as root
# /path/to/programname
Or better yet if you use sudo.
Better yet if you start the program with
gksu <programname>
This way you'll be asked for password and won't need a terminal.
By the way, if the program requires gtk to be in your sistem, maybe you should check that they're installed, giving
pacman -S gtk2
Last edited by olorian (2012-01-16 18:34:39)
Similar Messages
-
Unable to initialize GTK+, is DISPLAY set properly.
I'm attempting to set up the minimum for launching graphical programs from the command line, but whenever I attempt to launch one, I get this.
I'm not quite sure what Xserver has to do with GTK, but I also get an error launching that. http://pastebin.com/ZWgrZnWcI tried using apple community help already discussed on forum and I got my problem solved.
I installed XQuartz and restarted my system.
then
$ssh -Y [email protected]
it is connected and when i run my particular folder files
$make
it runs
$./window
it give me window using XQuartz. well done arshad -
Oracle ODBC - Internal Error - unable to initialize NLS during driver load
I'm having some trouble with my ODBC connections which I hope someone can please help me with!
About 6 weeks ago all was working as normal.
As far as I know there have been no updates to the ORacle DB, the Windows XP operating system or the ODBC Drivers.
Today when I opened access and visual case 2 to connect to Oracle I was at first greeted with a:
unable to connect SQLState=IM004 SQL_HANDLE_ENV
error. ODBC also kept crashing.
I restarted the computer and was confronted with a different error:
odbc SQLSTate 08004 ORA 12154 TNS could not resolve the connect identifier specified
I was able to fix this error by setting the environment variable TNS_ADMIN in windows xp environment variables. I'm extremely confused about how this happened though as it was working and I don't think anything has changed.
I was then able to connect to the database via Microsoft Access but when I opened Visual Case 2 and tried to make an update, I was confronted with the following error:
Oracle ODBC Driver - internal error - unable to initialize NLS during driver load
I looked in the registry at:
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home1
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home2
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb10g_home1
and NLS_LANG was set to "AMERICAN_AMERICA.WE8MSWIN1252" in all 3 places.
(Though KEY_OraClient10g_home2 only had 4 entries as opposed to KEY_OraClient10g_home1's 13 entries)...
Since I made those changes I can no longer connect through Access.
I just receive a ODBC - connection to 'xxx' failed
Advice greatly appreciated!!!!
Edited by: user11150264 on Aug 25, 2009 10:21 PMActually it sort of does...
I switched the ODBC connection to use instant client and now it's all working again.
The biggest mystery is what changed to make it suddenly stop working the old way... -
Has anyone solved the "Unable to initialize API" e...
I have an E61 that I'm trying to Sync to Lotus Notes 7 on my Windows XP sp2 Thinkpad. However, I keep getting the following error "Unable to initialize API" I can see that other people have been getting the error too. Nokia's web Site states that PC Sync works with Lotus Notes so I hope that there is a simple fix to this.
Thank You Penn JenningsHi Synch,
I checked the computer for notes.ini. There is only one file of this name. Its located in C:\Program Files\lotus\notes
I installed the latest version of the Nokia Suite 7.0.7.0
Here is the export of the registry key you requested"
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Components
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Components\LotusScriptExtensions
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Components\LotusScriptExtensions\2.0
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Value 0
Name:
Type: REG_SZ
Data:
Value 1
Name: Notes
Type: REG_SZ
Data: C:\Program Files\lotus\notes\nlsxbe.dll
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Components\TeamMail
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Value 0
Name: Description
Type: REG_SZ
Data: TeamMail Mail Enabling dll
Value 1
Name: KeyPath
Type: REG_SZ
Data: Software\Lotus\Notes
Value 2
Name: Application
Type: REG_SZ
Data: Notes
Value 3
Name: Version
Type: REG_SZ
Data: 1.0
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Notes
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Value 0
Name: DataPath
Type: REG_SZ
Data: C:\ntsdata\
Value 1
Name: Path
Type: REG_SZ
Data: C:\Program Files\lotus\notes\
Value 2
Name: Name
Type: REG_SZ
Data: Notes.exe
Value 3
Name: Description
Type: REG_SZ
Data: Lotus Notes
Value 4
Name: MultiUser
Type: REG_DWORD
Data: 0x0
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Notes\7.0
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Value 0
Name: DataPath
Type: REG_SZ
Data: C:\ntsdata
Value 1
Name: Description
Type: REG_SZ
Data: Lotus Notes
Value 2
Name: Name
Type: REG_SZ
Data: Notes.exe
Value 3
Name: Path
Type: REG_SZ
Data: C:\Program Files\lotus\notes
Value 4
Name: MultiUser
Type: REG_DWORD
Data: 0x0
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Sametime Client
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Sametime Client\StConnAgent
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Sametime Client\StConnAgent\IBMLotusNotes65
Class Name:
Last Write Time: 28/02/2008 - 1:25 PM
Value 0
Name:
Type: REG_SZ
Data: C:\Program Files\lotus\notes\stconnagent30.exe
I tried this on another laptop we have, a Dell D505. Notes is setup in what looks to be exactly the same way. Using the same ID file in the same location.
The Nokia Suite works perfectly with the this setup.
I compared the two registry entries for HKEY_LOCAL_MACHINE\SOFTWARE\Lotus. Besides differences in dates, both keys are exactly the same. So we have two computers where the connection works perfectly, it picks up the server and then you can log into it with a password. The other system won't connect to the Notes server and you can't get anywhere.
Any help appreciated. -
TMADMIN_CAT:1607: ERROR: Unable to initialize public key subsystem
Hi All,
I have installed HCM 9 with 8.49.08 PeopleTools on CentOS 5.3 Linux. Everything went fine (I have completed the creation of database) until I am about to start the application server that I have just created. I am getting this error, "TMADMIN_CAT:1607: ERROR: Unable to initialize public key subsystem".
@Nicolas
I have followed the instructions in your blog (it's very helpful). However I am now stack with this error.
Screenshot of the error after trying to boot the appserv:
PeopleSoft Domain Boot Menu
Domain Name: DMHCM
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying DMHCM/Archive/psappsrv.cfg to DMHCM/Archive/psappsrv_092509_0140_32.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by BEA Systems, Inc.
Tuxedo is a registered trademark.
TMADMIN_CAT:1607: ERROR: Unable to initialize public key subsystem
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :
Here the content of the ULOG:
CentOSLinux:psoft /applications/speople/pt849/appserv >tail ULOG.092509
014032.CentOSLinux!tmadmin.24422.3086362304.-2: 09-25-2009: Tuxedo Version 9.1, 32-bit
014032.CentOSLinux!tmadmin.24422.3086362304.-2: GP_CAT:1345: ERROR: pif: can't load 'registry.so'
014032.CentOSLinux!tmadmin.24422.3086362304.-2: LIBSEC_CAT:22: ERROR: Unable to realize the ecsec_map_proof interface implementation native/security/map_proof. Error code (-5000)
014032.CentOSLinux!tmadmin.24422.3086362304.-2: LIBTUX_CAT:6275: ERROR: Unable to initialize public key subsystem (-3003)
014032.CentOSLinux!tmadmin.24422.3086362304.-2: LIBTUX_CAT:6204: ERROR: Could not initialize public key subsystem
020404.CentOSLinux!tmadmin.25119.3086403264.-2: 09-25-2009: Tuxedo Version 9.1, 32-bit
020404.CentOSLinux!tmadmin.25119.3086403264.-2: GP_CAT:1345: ERROR: pif: can't load 'registry.so'
020404.CentOSLinux!tmadmin.25119.3086403264.-2: LIBSEC_CAT:22: ERROR: Unable to realize the ecsec_map_proof interface implementation native/security/map_proof. Error code (-5000)
020404.CentOSLinux!tmadmin.25119.3086403264.-2: LIBTUX_CAT:6275: ERROR: Unable to initialize public key subsystem (-3003)
020404.CentOSLinux!tmadmin.25119.3086403264.-2: LIBTUX_CAT:6204: ERROR: Could not initialize public key subsystem
This seems to be the main culprit... GP_CAT:1345: ERROR: pif: can't load 'registry.so' and I have searched this forum and found several suggestions like make sure that LD_LIBRARY_PATH is correctly set .. incorrect permssions, delete the .adm ... etc. I have done all of this suggestions. I even re-installed the Tuxedo 9.1 with the assumption that some files like resistry,.so might have been corrupted but this all did not resolved the issue. I believe I have done my I could before going here asking for help.
Here is the content of my .bash_profile:
# .bash_profile
PS1='CentOSLinux:$USER $PWD >'
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
export BEA=/applications/speople/bea
export TUXDIR=/applications/speople/bea/tuxedo91
export BEA_HOME=/applications/speople/bea/weblogic92
export ORACLE_HOME=/applications/oracle/10.2.0
export PATH=$PATH:$ORACLE_HOME/bin
LD_LIBRARY_PATH=$ORACLE_HOME/lib; export LD_LIBRARY_PATH
LIBPATH=$TUXDIR/lib:$LIBPATH:/usr/lib; export LIBPATH
export PS_HOME=/applications/speople/pt849
. $PS_HOME/psconfig.sh
I would really appreciate any help on this issue. Many thanks.Please, check if you have the following RPM installed :
[root@centos ~]# more /etc/redhat-release
CentOS release 5.3 (Final)
[root@centos ~]# rpm -q compat-libstdc++-33-3.2.3-61.i386
compat-libstdc++-33-3.2.3-61
[root@centos ~]#I tested it on CentOS5.3, everything is working fine. Please, see below all the installation steps :
1. Install CentOS 5.3 with all the default settings
2. Install Tuxedo
2.1 => Modify the file ./linux/sles9/base/tuxedo91_32_SLES_9_x86.bin
mv ./linux/sles9/base/tuxedo91_32_SLES_9_x86.bin /tmp/tuxedo91_32_SLES_9_x86.bin
cat /tmp/tuxedo91_32_SLES_9_x86.bin|sed 's/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/' > ./linux/sles9/base/tuxedo91_32_SLES_9_x86.bin2.2 => Download and install JDK5
./jdk-1_5_0_21-linux-i586-rpm.bin
For inquiries please contact: Sun Microsystems, Inc., 4150
Network Circle, Santa Clara, California 95054, U.S.A.
(LFI#143333/Form ID#011801)
Do you agree to the above license terms? [yes or no]
yes
Unpacking...
Checksumming...
0
0
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]).
inflating: jdk-1_5_0_21-linux-i586.rpm
Preparing... ########################################### [100%]
1:jdk ########################################### [100%]
Done.
[root@centos JDK5]# # /usr/sbin/alternatives --install /usr/bin/java java /usr/java/jdk1.5.0_21/bin/java 2
[root@centos JDK5]# /usr/sbin/alternatives --config java
There are 4 programs which provide 'java'.
Selection Command
* 1 /usr/lib/jvm/jre-1.6.0-openjdk/bin/java
2 /usr/lib/jvm/jre-1.4.2-gcj/bin/java
+ 3 /usr/java/jdk1.5.0_16/bin/java
4 /usr/java/jdk1.5.0_21/bin/java
Enter to keep the current selection[+], or type selection number: 4
[root@centos JDK5]# java -version
java version "1.5.0_21"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
[root@centos JDK5]#2.3 => Modify the file install.sh
The line
sh $INSTALL_BINARY -f $SILENT_INSTALL_FILE > $INSTALLER_OUTPUT;becomes
sh $INSTALL_BINARY LAX_VM /usr/java/jdk1.5.0_21/jre/bin/java -f $SILENT_INSTALL_FILE > $INSTALLER_OUTPUT;2.4 => run the Tuxedo Installer
sh ./install.sh3. Install Peopletools
4. Install the RPM (from the CentOS 5.3 DVD) - this is required for psadmin
rpm -Uvh compat-libstdc++-33-3.2.3-61.i386.rpm5. Install additional RPMs for Oracle
rpm -Uvh libXp-1.0.0-8.1.el5.i386.rpm
rpm -Uvh kernel-headers-2.6.18-128.el5.i386.rpm
rpm -Uvh glibc-headers-2.5-34.i386.rpm
rpm -Uvh glibc-devel-2.5-34.i386.rpm
rpm -Uvh compat-gcc-34-3.4.6-4.i386.rpm
rpm -Uvh libgomp-4.3.2-7.el5.i386.rpm
rpm -Uvh gcc-4.1.2-44.el5.i386.rpm
rpm -Uvh gcc-c++-4.1.2-44.el5.i386.rpm
rpm -Uvh compat-glibc-headers-2.3.4-2.26.i386.rpm
rpm -Uvh compat-glibc-2.3.4-2.26.i386.rpm
rpm -Uvh glibc-utils-2.5-34.i386.rpm
rpm -Uvh compat-db-4.2.52-5.1.i386.rpm
rpm -Uvh compat-gcc-34-c++-3.4.6-4.i386.rpm
rpm -Uvh compat-libstdc++-296-2.96-138.i386.rpm
rpm -Uvh gcc43-4.3.2-7.el5.i386.rpm
rpm -Uvh gcc43-c++-4.3.2-7.el5.i386.rpm6. Install Oracle (database or client depending of the config)
6.1 => add the entry in tnsnames.ora
6.2 => create the symbolic link
[oracle@centos oracle]$ cd $ORACLE_HOME/lib
[oracle@centos lib]$ ln -s libclntsh.so libclntsh.so.9.06.3 => make the ORACLE_HOME readable and executable for everbody
7. psoft user
7.1 => The .bash_profile
[psoft@centos ~]$ more .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
export ORACLE_HOME=/oracle/10.2
PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin
export PATH
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PS_HOME=/psoft/psoft849
. $PS_HOME/psconfig.sh
[psoft@centos ~]$7.2 => Modify the file $PS_HOME/psconfig.sh
PS_HOSTTYPE=redhat-4-ia32;export PS_HOSTTYPE8. psadmin, create the new domain, and start
PeopleSoft Domain Boot Menu
Domain Name: DMOHRMS9
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying DMOHRMS9/Archive/psappsrv.cfg to DMOHRMS9/Archive/psappsrv_092609_1218_35.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by BEA Systems, Inc.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level 036
INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
INFO: Licensed to: Oracle-Peoplesoft-ISV
Booting admin processes ...
exec BBL -A :
process id=26552 ... Started.
1 process started.
Attempting to boot ...
INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level 036
INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
INFO: Licensed to: Oracle-Peoplesoft-ISV
Booting server processes ...
exec PSWATCHSRV -A -- -ID 176290 -C psappsrv.cfg -D DMOHRMS9 -S PSWATCHSRV :
process id=26555 ... Started.
exec PSAPPSRV -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D DMOHRMS9 -S PSAPPSRV :
process id=26556 ... Started.
exec PSAPPSRV -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D DMOHRMS9 -S PSAPPSRV :
process id=26560 ... Started.
exec PSAPPSRV -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D DMOHRMS9 -S PSAPPSRV :
process id=26564 ... Started.
exec PSSAMSRV -A -- -C psappsrv.cfg -D DMOHRMS9 -S PSSAMSRV :
process id=26568 ... Started.
exec PSMONITORSRV -A -- -ID 176290 -C psappsrv.cfg -D DMOHRMS9 -S PSMONITORSRV :
process id=26571 ... Started.
exec JSL -A -- -d unused -n //centos.phoenix-nga:9000 -m 1 -M 3 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
process id=26574 ... Started.
exec JREPSVR -A -- -W -P /psoft/psoft849/appserv/DMOHRMS9/jrepository :
process id=26576 ... Started.
8 processes started.HTH,
Nicolas. -
Help needed on DATABASE ERROR: : unable to initialize mutex
Hello,
I am trying to run Berkeley DB on a MIPS platform using DbEnv. While the code runs fine on Linux RedHat, it throws the following error message when run on the MIPS:
DATABASE ERROR: : unable to initialize mutex: Function not implemented
DATABASE ERROR: : PANIC: Function not implemented
DATABASE ERROR: : unable to join the environment
I run a little test program which uses mutexes and conditionson the MIPS platform and seems to work fine.
What could be the problem?
Thank you and regards,
SebastianHello,
First of all thank you very much for all the support on this matter.
Second, I was unable to access the faq because it is asking for authentication which I don't have.
Here are more details on what I am trying to do, hopefully will help resolve the issue:
- I am trying to run Berkeley DB on a MIPS R3000 hardware platform running Linux 2.4 kernel.
- When configuring Berkeley DB I tried using --with-mutex=MIPS/gcc-assembly which resulted in an Illegal instruction error being thrown when trying to open the environment
- When configuring Berkeley DB I also tried using --enable-posixmutexes which throws the error message mentioned in my initial post
- I also wrote a little program that tries to use process shared mutexes and seems to work fine on the embeded system. here is what i successfully run on the box:
pthread_attr_t attr;
pthread_mutexattr_t mutex_attr;
pthread_condattr_t cond_attr;
pthread_mutexattr_setpshared(&mutex_attr, PTHREAD_PROCESS_SHARED); // set the mutex attribute to process shared
pthread_condattr_setpshared(&cond_attr, PTHREAD_PROCESS_SHARED); // set the condition attribute to process shared
/* Initialize mutex and condition variable objects */
pthread_mutex_init(&count_mutex, (const pthread_mutexattr_t *)&mutex_attr);
pthread_cond_init (&count_threshold_cv, (const pthread_condattr_t *)&cond_attr);
For portability, explicitly create threads in a joinable state
pthread_attr_init(&attr);
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);
pthread_create(&threads[0], &attr, inc_count, (void *)&thread_ids[0]);
pthread_create(&threads[1], &attr, inc_count, (void *)&thread_ids[1]);
pthread_create(&threads[2], &attr, watch_count, (void *)&thread_ids[2]);
Thank you very much for your help!
Regards,
Sebastian -
Error unable to initialize audio player
I Installed a scan & translate app, but i cant use it because of error unable to initialize audio player what seems the problem.
Sukkari wrote:
I Installed a scan & translate app, but i cant use it because of error unable to initialize audio player what seems the problem.
Since you're using a 3rd party app, you should ask the app developer or look at their support site. -
I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network
Which version of OSX and what email provider are you using.
-
Gui error: Unable to initialize New Visual Design Mode
SAP Frontend Server
Unable to initialize New Visual Design Mode.
Please use Classic Mode.
What can i do with this error? ThanksHi,
Do you see this error only in 1 system. If yes, perform the following:
1. Install the updated display drivers.
2. Check the operating system (some old operating systems such as Windows 98, NT doesn't support Visual designs.)
3. Check that you have the latest version of SAP GUI patches installed.
If the problem persists, run sapsweep.exe and install the GUI again.
Rgds,
Raghu -
---We are trying to setup Hyper-V on Samba shares samba version 3.6 exported from Ubuntu M/c. Basically runnig the Public(share) from the Ubuntu and able to access it from Windows 2012 (create/modify everything). I used Hyper-V and placed the disks
".vhd" on this , VM succesfull created and started. However when I placed the VM config files on this (samba) shares VM created successfully but its not starting, Its giving error like Unable to initialize the saveset -- Any idea how to place the
Hyper-V VM config files samba share?Hi Rakesh KK,
Please confirm your share meet the Serve 2012r2 Hyper-V requirement, you can refer the following KB to get more detail require conditions.
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19) -
[SOLVED] ERROR: Unable to find root device '/dev/sda3'
Earlier I updated the kernel to my arch system and found this error while trying to boot. I hate to post this because there are so many topics like it, but I've been looking for hours for a solution to this problem and can't find one.
Here is the output:
Booting 'Arch Linux'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernet /vmlinuz-linux root=/dev/sda3 ro
[Linux-bzImage, setup=0x4200, size=0x2ff2d0]
initrd /initrd @ 0xfd17000, 0x2c878c bytes]
Probing EDD (edd=off to disable)... ok
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
:: Starting udevd...
done.
Waiting 10 seconds for device /dev/sda3 ...
ERROR: device '/dev/sda3' not found. skipping fsck.
ERROR: Unable to find root device '/dev/sda3'.
You are being dropped to a recovery shell
type 'exit' to try and continue booting
sh: can't access tty; job control turned off
My partition layout is like this:
swap: /dev/sda1
boot: /dev/sda2
root: /dev/sda3
extended: /dev/sda4
home: /dev/sda5
I have two hard drives, but i'm sure /dev/sda is the one with my OS.
Here are some things I've tried:
This was at the very bottom of the pacman wiki
# mkdir /mnt/arch
# mount /dev/sdaX /mnt/arch (your root partition)
# cd /mnt/arch
# mount -t proc proc proc/
# mount -t sysfs sys sys/
# mount -o bind /dev dev/
# mount /dev/sdaX boot/ (your /boot partition) #This step is not needed if you do not have a separate boot partition
# chroot .
# pacman -Syu udev mkinitcpio
# mkinitcpio -p linux
I've also tried performing the above, downgrading the kernel, updating my mirrorlist, reinstalling the kernel, and rebooting as mentioned here.
I've alsa tried a few other things that I've read, but can no longer remember.
Any help would be greatly appreciated! Thanks.
Last edited by colton7909 (2012-05-25 02:09:36)Thank colton
Same problem here, but on a mac book (not mine eyh )
So, for those how have the problem (or need a live usb for mac or uefi systems),
1) with a 32bits system
- download gparted live cd
- use it for the step 3
2) with a 64bits system:
- you need the gparted live cd too: mount it and copy the EFI directory somewhere; then umount it;
- download a 64bits system (system rescue cd, as colton said is enough, follow the instructions for installation on their website first);
- mount you live usb, install the 64bits system;
- copy EFI system on the key
- edit the grub.cfg in EFI/boot/ , add the following before the other entries:
menuentry "System Rescue" {
set gfxpayload=keep
linux /syslinux/altker64 nomodeset efi
initrd /syslinux/initram.igz
3) repairing...
- boot the broken computer with the live usb
- mount the partition on which your system is (e.g. /dev/sda1 on /mnt)
- chroot it, init the system as needed (mount /dev, /proc, etc. the easier way is using init scripts)
% chroot /mnt /bin/bash
% /etc/rc.sysinit
% mkinitcpio -p linux -
API error when trying to create a display set
Hello,
I'm creating a mapping, and I'm trying to define an attribute display set in the target table to show only some of the attributes of the table. I have called it 'SHORT_LIST' and I have also selected the attributes I want to display, but when I press OK, the followig error message is shown: "API0411: Name should not be an empty string", but I do fill the display set name!
What is happening?
Cheers,
Natividad Moreno.Hi,
Not sure what is happening here. What version are you running? This seems like a bug though so I suggest logging an iTar wiht support.
Jean-Pierre -
Can't solve error "Unable to authenticate/execute the action: (code 3)
For many months I encounter this error, for example, when I try to do something that requires Polkit authorisation within SystemSettings. I can't for example change KDM settings or the clock.
The error is this one
Pressing "Apply" doesn't do anything. This error appears when I try to close the KDM window (for example), and KDE says that there are some changes that need to be applied. If I try to apply them, this error occurs.
I have tried to rebuild the polkit related packages, but no result.
What should I do ?
(That occurs even with a new .kde4 directory, with default settings)brenden1096 wrote:If I remember correctly kdesu is the GUI administration authorization for KDE.
kdesu & and the polkit authorisation dialogue through System Settings.
But, even when I execute (for example), kdesu systemsettings, the result is the same. -
Flat File Conversion Error: Unable to initialize communication channel
Dear experts.
I have a file to flat file scenario. I just wanted to test this first because it's the first time. I followed this blog: /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
I get this message: Channel has not been correctly initialized and cannot process messages. I looked around on the forum and in other blogs, and it seems something is wrong with my Content Conversion Parameters. Could you please advise?
The message is a small customer test message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_TEST xmlns:ns0="urn://xi/csr/customer">
<Customer_File>
<Customer>
<Name>xxx</Name>
<Last>xxxxxxxx</Last>
</Customer>
</Customer_File>
</ns0:MT_TEST>
The parameters I am using are:
Recordset structure: Customer_File,Customer
Customer.addHeaderLine: 0
Customer.fieldSeparator: #
Customer_File.fieldSeparator: 'nl'
Customer.endSeparator: 'nl'
The mapping I am using is one-to-one.
This is not working for me...
Furthermore, I would like to set the Name and Last tag to set field lengths. Is this possible for these tags??
Thanks in advance.
*Will reward points for helpful answershi
PLz try with the following steps:
chk the occurence of customer.
if the customer occurence is (0-------unbounded) then
ur recordset structure is Customerfile,Customer*
may helful.
THanks
MANas
Maybe you are looking for
-
Folder Redirection not working on SMB Network Home Directories
I've setup network home directories on a 10.7.3 server. NHDs are available via SMB currently. I'm trying to setup folder redirection via MCXRedirector for both the ~/Library/Cache folder and ~/Downloads and redirect them to the local client. Client i
-
I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.
-
Active Directory users not made member of Local Network group
Hi all, I've just done a clean install from 10.6 Server to 10.8.4. The issue I seem to be having is a mismatch between what Groups in Server.app is reporting as members (who happen to be users or groups from our Active Directory domains) of a Local N
-
Help please itunes update error
now when i try to install on my iphone the latest iphone software i get an error (9) what i have to do ?
-
Log in option using Work Group Manager to see all network users
I am getting different login options with my network of 20 iMacs, yet they are all set-up the same way using WorkGroup Manager. I would like the option of having all of the user names displayed on the login screen. I work at a small high school, and