[SOLVED] Execute script after login

Hi,
I want to execute a script after I logged in, but it fails. There is no problem, when I do this manually.
My ~/.xsession:
#!/bin/sh
~/bin/select-monitor.sh
I tried to paste this in .xinitrc, also, but it fails, too.
What can I do?
EDIT: Okay, this has solved my problem:
http://i3wm.org/docs/userguide.html#_au … i3_startup
Greets
Steffo
Last edited by Steffo (2013-01-19 10:52:29)

/etc/pam.d/common-auth exists only to be included in other, service-specific PAM files, so one can easily change auth mechanisms for all/majority services at once. You don't have it, so probably you have fully separate PAM files, without common include; so you should just apply those common-auth advices to all services you are going to modify. As always with PAM -- BE CAUTIOUS. Especially if your machine sits a few hundred km away

Similar Messages

Execute script after pdf render

Hi
Is it possible to programatically execute scripts embedded in a pdf right after it has been rendered by form server?
Thank you

Hi Paul
I found a work-a-round but ideally yea I did want the script to execute client side, but I thought about it for awhile and realized that how could the script execute on *DocReady if the form wasn't opened?? By server-side do you mean LiveCycle ES Forms, does Forms have the power to execute a script embedded in a form after it has rendered it??
Thanks

[SOLVED]Run startx after login?

I have a laptop with multiple users.
Is it possible to have a different setup for each user, stored in their /home/ folder? So, when I log in, all I see is the terminal, but when another user, say a guest user, logs in, LXDE starts up.
Right now, I put this in my .xinitrc file (startlxde in guest, xmonad in my own), but is it possible to set start different programs for different users after login? I would prefer start x on my own from my own user, but my brother who frequently use my laptop don't want to type startx each time he logs in.
Last edited by Herover (2012-06-27 18:41:33)

Assuming you set up the right .xinitrc in each users ~/ this (from the wiki) will startx automatically for each user you decide to bless with the additions to their .bash_profile
.bash_profile wrote:if [[ -z $DISPLAY ]] && [[ $(tty) = /dev/tty1 ]]; then
startx
fi
Edit: Here is the article.
Last edited by Psykorgasm (2012-06-27 18:00:35)

[SOLVED] Autostart startx after login

Hi everyone,
I have a problem with autostarting startx after I log in.
So far the machine boots, terminal login dialog appears, I log in, get my terminal and start X manually via "startx".
But I want my system to start X automatically after logging in. Without me typing in the command.
So I did some research (both internet and the Arch forums) and couldn't come up with a working solution to that problem.
More or less every thread links to the Start X at Login page.
And I did add the lines in question to my .bash_profile (after I made a skeleton copy of it, as described).
But still nothing happens after logging in (I waited for about half a minute). So it doesn't work for, or I am doing something wrong.
Here my .bash_profile:
# ~/.bash_profile
[[ -f ~/.bashrc ]] && . ~/.bashrc
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
I have no idea how to proceed.
Does anyone have an idea how to solve this?
Last edited by tentorange (2014-09-09 13:45:34)

Nothing happens? Do you mean you are just at a command prompt, no errors, nothing? And you are not logged out? Even with a faulty or empty xinitrc, this would still end your current login session.
So it seems the conditionals don't pass. This means either that X is already running, or you do not have an active login session. Are you booting with an alternative init system? If you get to a command prompt enter the following commands and report their results:
pgrep Xorg
echo $0
echo $XDG_VTNR
loginctl
uname -a

How to execute query after login?

Hi Gurus,
I'm developing nowadays a small system,that shows every employee his data( attendance time,vacations,execuses..etc),I just want to execute query (pop up data) once the employee logged in,as I get his login name and sysdate and execute the query.
how could this happen? do I need a process ? what is it?
How to get the system date?
thanks in advance
Pardon me,am just new here and still my terms for Developer 2000.

You can do it with a process (call it onload) or with a simple sql query mapped to a region in the home page of your application.
hope this helps

[SOLVED] Can't execute scripts with Thunar/XFCE. (Runs OK in terminal)

Until recently, I could double-click a script (or link to a script) in Thunar or on the XFCE desktop, and it would execute
Now, however, when I double-click a script, it opens in Leafpad (my text editor). I've browsed the wiki and searched the forum and web, but can't find any clues as to what has changed or why this is happening.
I can right-click in Thunar and use the "Open With>" option to set the script to open with another application, but there's no obvious option to run a script. Opening with a terminal emulator results in a brief hourglass, then nothing.
The script I'm testing with (the Tor Browser Bundle startup script) is in my /home/myname directory, has -rwx------ permissions (with me as the owner), and the file type in Thunar shows "shell script". It runs fine if I execute it in a terminal with "sh /path/to/script" -- just not via Thunar or the XFCE desktop.
Can anyone suggest anything I could check?
Last edited by esuhl (2015-03-08 09:49:52)

foutrelis wrote:
This is an intended change in Thunar 1.6.5: https://bugzilla.xfce.org/show_bug.cgi?id=7596#c15
Thunar 1.6.6 has a hidden option to restore the old behavior: http://git.xfce.org/xfce/thunar/commit/?id=b385bcf
The option is called misc-exec-shell-scripts-by-default and can be set using xfce4-settings-editor or by following the instructions here:
http://docs.xfce.org/xfce/thunar/hidden-settings
Thanks so much for the explanation!
I tried creating "misc-exec-shell-scripts-by-default" in the Settings Editor, set to true, but it didn't seem to have any effect. So I tried this in a terminal, also to no effect:
xfconf-query --channel thunar --property /misc-exec-shell-scripts-by-default --create --type bool --set true
If I right-click on a script, the top item on the menu is still "Open with Leafpad". Do I somehow need to change the default behaviour to "execute script"...? I've searched but I can't seem to find any further information.
I guess it's not a big deal, but it would be nice to restore the default behaviour.

[Solved] White screen after KDE 4.11.1 upgrade

Hi!
I updated the system going from KDE 4.11.0 to KDE 4.11.1. On reboot I got the correct loading of KDM, but upon arrival on the desktop the latter is presented fully white with big red button with an "X" in them. Thinking it was the configuration of kde, I deleted .kde4 with the effect that the next time I always white screen (that is only the red buttons have disappeared).
I try to remove completely kde with:
pacman -Rsnc kde
and seeing that reinstalling I get the same result, I also tried to clean up the cache pacman packages listed by the command:
ls kde*4.11.1*
so I redownload and reinstalled with:
pacman -Syu kde
without solution. I also tried to do what is recommended in the wiki, that is in addition to eliminating .kde4, I run:
$ rm ~/.config/Trolltech.conf
$ kbuildsycoca4 --noincremental
without solution.
Thinking then it might be the partition / almost full, I checked with:
df
but the partition is not filled even for half of the 30gb that is available.
I checked some logs and these are the outputs:
.xsession-errors
> http://pastebin.com/GESX81PV
boot.log
[[32m OK [0m] Started Load Kernel Modules.
Mounting Configuration File System...
[[32m OK [0m] Mounted Configuration File System.
[[32m OK [0m] Found device SAMSUNG_SSD_830_Series.
Mounting /Windows...
Mounting FUSE Control File System...
[[32m OK [0m] Mounted FUSE Control File System.
[[32m OK [0m] Mounted /Windows.
[[32m OK [0m] Found device WDC_WD10EALX-009BA0.
Mounting /Dati...
[[32m OK [0m] Mounted /Dati.
[[32m OK [0m] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Recreate Volatile Files and Directories...
Starting Tell Plymouth To Write Out Runtime Data...
[[32m OK [0m] Reached target Bluetooth.
[[32m OK [0m] Started Trigger Flushing of Journal to Persistent Storage.
[[32m OK [0m] Started Recreate Volatile Files and Directories.
Starting Update UTMP about System Reboot/Shutdown...
[[32m OK [0m] Started Update UTMP about System Reboot/Shutdown.
[[32m OK [0m] Started Show Plymouth Boot Screen.
[[32m OK [0m] Started Tell Plymouth To Write Out Runtime Data.
[[32m OK [0m] Reached target System Initialization.
[[32m OK [0m] Listening on CUPS Printing Service Sockets.
[[32m OK [0m] Reached target Paths.
[[32m OK [0m] Listening on D-Bus System Message Bus Socket.
[[32m OK [0m] Reached target Sockets.
[[32m OK [0m] Reached target Timers.
Starting Restore Sound Card State...
[[32m OK [0m] Reached target Basic System.
Starting Network Manager...
Starting CUPS Printing Service...
[[32m OK [0m] Started CUPS Printing Service.
Starting Catalyst's fglrx kernel' module builder...
Starting Login Service...
Starting D-Bus System Message Bus...
[[32m OK [0m] Started D-Bus System Message Bus.
Starting Permit User Sessions...
[[32m OK [0m] Started Permit User Sessions.
Starting Wait for Plymouth Boot Screen to Quit...
Starting K Display Manager...
[[32m OK [0m] Started K Display Manager.
[[32m OK [0m] Started Catalyst's fglrx kernel' module builder.
[[32m OK [0m] Reached target Sound Card.
[[32m OK [0m] Started Restore Sound Card State.
[[32m OK [0m] Started Login Service.
Starting Manage, Install and Generate Color Profiles...
Starting Authorization Manager...
[[32m OK [0m] Started Manage, Install and Generate Color Profiles.
[[32m OK [0m] Started Authorization Manager.
[[32m OK [0m] Started Network Manager.
[[32m OK [0m] Reached target Network.
Starting Network Time Service...
[[32m OK [0m] Started Network Time Service.
[[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
[K[[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
[K[[31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
[K[ [31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
[K[ [31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
[K Starting Daemon for power management...
[[32m OK [0m] Started Daemon for power management.
Starting Disk Manager...
[[32m OK [0m] Started Disk Manager.
[ [31m*[1;31m*[0m[31m*[0m] A start job is running for Wait for Plymouth Boot Screen to Quit
[K[[1;31mFAILED[0m] Failed to start Wait for Plymouth Boot Screen to Quit.
See 'systemctl status plymouth-quit-wait.service' for details.
Starting Getty on tty1...
[[32m OK [0m] Started Getty on tty1.
[[32m OK [0m] Reached target Login Prompts.
[[32m OK [0m] Reached target Multi-User System.
[[32m OK [0m] Reached target Graphical Interface.
[[32m OK [0m] Stopped target Sound Card.
[[32m OK [0m] Stopped target Bluetooth.
Stopping Disk Manager...
Stopping Daemon for power management...
Stopping Authorization Manager...
Stopping Manage, Install and Generate Color Profiles...
Stopping CUPS Printing Service...
[[32m OK [0m] Stopped target Graphical Interface.
[[32m OK [0m] Stopped target Multi-User System.
Stopping Network Time Service...
Stopping Catalyst's fglrx kernel' module builder...
Stopping Login Service...
Stopping D-Bus System Message Bus...
[[32m OK [0m] Stopped target Login Prompts.
Stopping Getty on tty1...
Stopping K Display Manager...
[[32m OK [0m] Stopped K Display Manager.
[[32m OK [0m] Stopped Daemon for power management.
[[32m OK [0m] Stopped Getty on tty1.
[[32m OK [0m] Stopped D-Bus System Message Bus.
[[32m OK [0m] Stopped Disk Manager.
Stopping Permit User Sessions...
[[32m OK [0m] Stopped Authorization Manager.
[[32m OK [0m] Stopped Network Time Service.
[[32m OK [0m] Stopped target Network.
Stopping Network Manager...
[[32m OK [0m] Stopped Manage, Install and Generate Color Profiles.
[[32m OK [0m] Stopped Catalyst's fglrx kernel' module builder.
[[32m OK [0m] Stopped Login Service.
[[32m OK [0m] Stopped Network Manager.
[[32m OK [0m] Stopped CUPS Printing Service.
[[32m OK [0m] Stopped Permit User Sessions.
[[32m OK [0m] Stopped target Basic System.
[[32m OK [0m] Stopped target Paths.
[[32m OK [0m] Stopped target Timers.
[[32m OK [0m] Stopped target Sockets.
[[32m OK [0m] Closed CUPS Printing Service Sockets.
[[32m OK [0m] Closed LVM2 metadata daemon socket.
[[32m OK [0m] Closed /dev/initctl Compatibility Named Pipe.
[[32m OK [0m] Closed Delayed Shutdown Socket.
[[32m OK [0m] Closed Device-mapper event daemon FIFOs.
[[32m OK [0m] Closed udev Control Socket.
[[32m OK [0m] Closed D-Bus System Message Bus Socket.
[[32m OK [0m] Stopped target System Initialization.
Unmounting Debug File System...
Unmounting FUSE Control File System...
Stopping Update UTMP about System Reboot/Shutdown...
Unmounting POSIX Message Queue File System...
Unmounting Huge Pages File System...
Stopping Setup Virtual Console...
[[32m OK [0m] Stopped Setup Virtual Console.
[[32m OK [0m] Unset automount Arbitrary Executable File Formats File System Automount Point.
Stopping Apply Kernel Variables...
[[32m OK [0m] Stopped Apply Kernel Variables.
Unmounting Configuration File System...
[[32m OK [0m] Stopped target Encrypted Volumes.
[[32m OK [0m] Stopped target Swap.
[[32m OK [0m] Stopped target Local File Systems.
Unmounting /Windows...
Unmounting /Dati...
Unmounting Temporary Directory...
Stopping Journal Service...
[[32m OK [0m] Stopped target Remote File Systems.
[[32m OK [0m] Stopped Update UTMP about System Reboot/Shutdown.
[[32m OK [0m] Unmounted Temporary Directory.
[[32m OK [0m] Unmounted POSIX Message Queue File System.
[[32m OK [0m] Unmounted FUSE Control File System.
[[32m OK [0m] Unmounted Huge Pages File System.
[[32m OK [0m] Unmounted Configuration File System.
Stopping Load Kernel Modules...
[[32m OK [0m] Stopped Load Kernel Modules.
[[32m OK [0m] Unmounted Debug File System.
[[32m OK [0m] Unmounted /Windows.
[[32m OK [0m] Unmounted /Dati.
[[32m OK [0m] Reached target Unmount All Filesystems.
[[32m OK [0m] Stopped target Local File Systems (Pre).
Stopping Remount Root and Kernel File Systems...
[[32m OK [0m] Stopped Remount Root and Kernel File Systems.
[[32m OK [0m] Stopped Journal Service.
[[32m OK [0m] Closed Journal Socket.
Starting Show Plymouth Reboot Screen...
Starting Store Sound Card State...
Unmounting /...
[[32m OK [0m] Started Store Sound Card State.
[[32m OK [0m] Reached target Shutdown.
Sending SIGTERM to remaining processes...
Sending SIGKILL to remaining processes...
Hardware watchdog 'iTCO_wdt', version 0
Unmounting file systems.
All filesystems unmounted.
Deactivating swaps.
All swaps deactivated.
Detaching loop devices.
All loop devices detached.
Detaching DM devices.
All DM devices detached.
Storage is finalized.
dmesg
> http://pastebin.com/fbgh2ayu
journalctl -p 3 --since=today
-- Logs begin at mar 2013-07-30 13:16:10 CEST, end at lun 2013-09-16 08:52:14 CEST. --
set 16 08:43:14 arch dhcpcd[346]: eno1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
set 16 08:43:14 arch ntpd_intres[338]: host name not found: 0.pool.ntp.org
set 16 08:43:14 arch ntpd_intres[338]: host name not found: 1.pool.ntp.org
set 16 08:43:14 arch ntpd_intres[338]: host name not found: 2.pool.ntp.org
set 16 08:43:14 arch ntpd_intres[338]: host name not found: 3.pool.ntp.org
set 16 08:43:18 arch ntpd_intres[338]: host name not found: 0.pool.ntp.org
set 16 08:43:18 arch ntpd_intres[338]: host name not found: 1.pool.ntp.org
set 16 08:43:18 arch ntpd_intres[338]: host name not found: 2.pool.ntp.org
set 16 08:43:18 arch ntpd_intres[338]: host name not found: 3.pool.ntp.org
set 16 08:45:03 arch login[308]: pam_systemd(login:session): Failed to connect to system bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
set 16 08:45:04 arch kdm[351]: :0[351]: pam_systemd(kde:session): Failed to connect to system bus: Failed to connect to socket /run/dbus/system_bus_socket: Connection refused
set 16 08:45:04 arch kdm[351]: :0[351]: pam_close_session() failed: Cannot make/remove an entry for the specified session
set 16 08:45:04 arch systemd-coredump[1103]: Process 309 (X) dumped core.
[1;39m-- Reboot --[0m
set 16 08:46:11 arch dhcpcd[346]: eno1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
set 16 08:46:12 arch ntpd_intres[337]: host name not found: 0.pool.ntp.org
set 16 08:46:12 arch ntpd_intres[337]: host name not found: 1.pool.ntp.org
set 16 08:46:12 arch ntpd_intres[337]: host name not found: 2.pool.ntp.org
set 16 08:46:12 arch ntpd_intres[337]: host name not found: 3.pool.ntp.org
set 16 08:46:16 arch ntpd_intres[337]: host name not found: 0.pool.ntp.org
set 16 08:46:16 arch ntpd_intres[337]: host name not found: 1.pool.ntp.org
set 16 08:46:16 arch ntpd_intres[337]: host name not found: 2.pool.ntp.org
set 16 08:46:16 arch ntpd_intres[337]: host name not found: 3.pool.ntp.org
set 16 08:48:02 arch login[305]: pam_tally(login:auth): pam_get_uid; no such user
kdm.log
> http://pastebin.com/zmgj4AGq
Xorg.0.log has no errors.
How can I resolve it?
Thanks
Last edited by Fregtux (2013-09-20 08:35:13)

Fregtux wrote:
Thanks Thaodan! I deleted /var/tmp/kdecache-$USER and I solve the problem! I also restore .kde4_backup and at the moment have no issue.
Small question: I noticed that there are also kdecache-kdm and kdecache-root. I should remove it or doesn't matter?
Thanks for the help!
THANKS, my White Screen was caused by a combination of issues but this solution worked for me.
My Problem -
I am not sure exactly what caused my white screen, I was playing around with /etc/profile & /etc/sudoers
What I changed -
sudoers - I added my user group to sudoers and allowed sudo to execute applications using xauth in home dir
profile - changed umask to 133 ( I hate execute bit ) and default text editor to nano
What Happened -
Tried to reload via source but no changes where taking effect so I rebooted.
Upon reboot I could not login to KDE, it would keep looping back to the KDM after I entered by password for my user, however it would let me login as root ( after I enabled root login ).
I figured this was a permission issue so I changed umask back to 022 in /etc/profile, I was then greeted with the White Screen after login. I read numerous posts about how to fix this, most said to reinstall kde and delete /tmp, none of this worked.
I deleted /var/tmp/kdecache-$USER and now I am back in business ( I had to re set the widgets, i.e. panel ).
I was so excited that I had to write a post about it!
Thanks again!

Agent going to ready state after login

Hi guys,
I have UCCX 5.0(2) and I would like to force agent to go to state ready after login. There were some posts on this topic and they suggested to play with workflow:
1. add add action agent ready at startup - for this I get: "Error on Startup Event. Error Message: An Agent State Action may only be used on Answered and Dropped Events."
2. add macro - record putting agent in ready state (keystroke Ctrl +W). This I can do, but agent gets error during login: " Could not execute Macro Action. Unable to playback to windows program."
Did you have similar problems? Did you solve it and how? Or maybe you have some other idea how to force agent to go in ready state after login?
BR,
Jelena

Hi,
Problem An agent using Windows XP was able to start Agent Desktop, but was
not able to enter an active state.
Solution Windows XP can be configured so that the Internet Connection Firewall
(ICF) is active. ICF acts by keeping track of all traffic to and from the
computer; it will only allow information through that has originated from
that particular computer. If a message originates from outside the
computer, it will be discarded.
To solve this problem, either turn off ICF (requires someone with
administrator rights to the computer) or override the defaults to include
known “good” connections like the CAD servers.
And also, is it by any chance happening during a failover or failback scenario in a High Availability (HA) setup?
If its a HA setup, did you install this CAD after the HA setup is made i.e. the CAD has the entries for the ip address of the both the nodes.
Hope it helps,
Anand

Run script AFTER boot

I want to run a non-ending script after boot. And I still want to be able to login. So adding the script to rc.local won't fix my problem since the boot process won't finish so that I can login.
Adding the script to "dillons" cron doesn't seem to work either since you cant specify @boot in it. And setting "* * * * *" will result in 1 minutes wait before the script runs.
Does anyone have any good ideas to solve my problem?

as mentioned you can background it in rc.local, or you can create a custom /etc/rc.d file which will make it a daemon just like any other. there are templates or just copy some existing simple one. i created one for dropbox which is available on the wiki if you'd like to use it as a guide.
/edit. whoops; took too long to craft that response. ignore me.
Last edited by brisbin33 (2009-06-25 14:16:28)

Windows 8 .1 black screen after login with cursor

after login in pc i get a black screen and a cursor i can do nothing please help me i updated windows 8 to windows 8.1.

HI , Welcome to the HP Forums! It is a grand place to find answers and information! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More How Do I Find My Model Number or Product Number? I grasp that you have a HP 15 notebook and you recently upgraded from Windows 8. to 8.1. Now after you enter your Windows password you get a black screen with a cursor. Here is a link to HP PCs - Black or blank screen with blinking cursor after entering Windows password. To say thanks for responding please click the thumbs up icon below. If this solved your difficulty please tell people by selecting solution provided. Best of Luck!

Black screen after login. Windows 8 is not opening

After login, I only have a black screen with a cursor.
Windows 8 does not open. Cannot get to "System Restore" or Control Panel.
HP hardware self- diagnostic tests were negative & didn't help.
Please offer possible solutions for recovery.

Then that does not pertain to your problem.
On Kaspersky Rescue Disk on another computer download and burn to USB stick or DVD to run a full scan on your computer.
http://support.kaspersky.com/4162
Are you able to boot into Safe Mode to perform a System Restore?
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Execute script from AfterFX command line

Hello all
I'm trying to run a script from the AfterFX.exe command line and I get a message: "Unable to execute script at line 1. Syntax error"
If I run the same script file from the AE Script Editor, it works perfectly
Here is the command line I'm using:
"C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe" -noui -s "D:\Product\Watermark\Rendering\WatermarkedSecuritySample.jsx"
Anyone have an idea of what can cause this error? I've tried running the script directly in the command line like
"C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe" -noui -s "alert('1')"
and it works fine for short script but mine is way to big to do that
As you can probably guess with the "Watermark" and "Security" in the filename, I cannot post the script file here, all I can say is that the line 1 is:
var projectName = "D:\\Product\\WatermarkTemplate.aep";
I've tried to replace the entire script with "alert('1');" and it cause the same error when running it from the command line
Also, if anyone know where I can find the AfterFX.exe command line arguments description, I would be very happy.. everybody talks about aerender.exe but I need thoses options for AfterFX.exe
Thanks for your help

Have you tried to use "-r" instead of "-s"?
(argument for "-s" is a script; and argument for "-r" is a path to script)

Session state always invalid after login

Hello community,
i have a functional login process which uses my own login with username and password. After login i branch to application start page, but this session now is different from the start login session, so every login is invalid and will branch to authentication scheme invalid page.
My login url is: f?p=100:100:123456
After correct login (i have tested in the database with a lot of inserts into tmp_table)
i want to branch with the standard login procedure wwv_flow_custom_auth_std.login() to page 1000.
The correct url is shown in the browser, but the current page is the login page 100, because (i think) the session is invalid. In the authentication theme the invalid session page is set to page 100.
I have tested several pages and always this page is branched.
So im shure, that the session state is always invalid after login.
But why ????
Has anyone an idea ?
Thank you for responding.
Frank

Hi Jari,
problem was solved.
The IE8 has cached an invalid site.
I know now were it is come from.
I have an after submit process which sets the cookie with following code:
owa_util.mime_header('text/html; charset=UTF-8;', FALSE);
owa_cookie.send(
name=>'DHW_COOKIE',
value=>utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5(input_string => ':P100_REGCODE' || :P100_USERNAME ))
owa_util.http_header_close;
But this results in display on the screen like html text without tags, so it looks like text on the screen header.
It shows "content-type=text/html charset=WINDOWS 1252 .......
The cookie is not set to the disk and now the IE8 explorer is dead.
The described problem of this thread is shown.
If you close all sessions and restart IE8 then the error is fixed.
Also i have disabled the after submit process with setting the cookie.
So i live now without having a cookie set.
Do you have any idea for this behaviour ?
Frank

OSX 10.9 Mavericks is there any way to hide servers which always appear in finder after login (hide login items doesn't work as stardered)

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

7.0.0.102 Crashes immediately after login

After updating to Skype 7 it crashes immediately after login.
I don't have facerig or FFsplit or any webcams. Windows is updated firewall is turned off.
The eventlogs show this:
Faulting application name: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
Faulting module name: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
Exception code: 0xc0000005
Fault offset: 0x00d527d7
Faulting process id: 0x1e7c
Faulting application start time: 0x01d029890c579caf
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Report Id: 58eb96c6-957c-11e4-aae2-00224d806fdf
Any ideas what I can do to get it working again?
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏6 KB

I appear to have the same problem. See below. Do we know when there might be a fix?
Elmsteader
Log Name:     Application
Source:       Application Error
Date:         27/01/2015 15:40:27
Event ID:     1000
Task Category: (100)
Level:         Error
Keywords:     Classic
User:         N/A
Computer:     Antec
Description:
Faulting application name: Skype.exe, version: 7.0.60.102, time stamp: 0x5489935b
Faulting module name: Skype.exe, version: 7.0.60.102, time stamp: 0x5489935b
Exception code: 0xc0000005
Fault offset: 0x00d527d7
Faulting process id: 0x1670
Faulting application start time: 0x01d03a4783381172
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Report Id: d04f9672-a63a-11e4-84d9-00241dd94d4c
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
   <Provider Name="Application Error" />
   <EventID Qualifiers="0">1000</EventID>
   <Level>2</Level>
   <Task>100</Task>
   <Keywords>0x80000000000000</Keywords>
   <TimeCreated SystemTime="2015-01-27T15:40:27.000000000Z" />
   <EventRecordID>129636</EventRecordID>
   <Channel>Application</Channel>
   <Computer>Antec</Computer>
   <Security />
</System>
<EventData>
   <Data>Skype.exe</Data>
   <Data>7.0.60.102</Data>
   <Data>5489935b</Data>
   <Data>Skype.exe</Data>
   <Data>7.0.60.102</Data>
   <Data>5489935b</Data>
   <Data>c0000005</Data>
   <Data>00d527d7</Data>
   <Data>1670</Data>
   <Data>01d03a4783381172</Data>
   <Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
   <Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
   <Data>d04f9672-a63a-11e4-84d9-00241dd94d4c</Data>
</EventData>
</Event>

[SOLVED] Execute script after login

Similar Messages

Maybe you are looking for