[SOLVED] firewall from wiki, iptables: No chain/target/match by
I am trying to build a simple firewall using Arch wiki page, https://wiki.archlinux.org/index.php/si … l_firewall
I ended up with this:
#!/bin/bash
iptables -N TCP
iptables -N UDP
iptables -P FORWARD DROP
iptables -P OUTPUT ACCEPT
iptables -P INPUT DROP
iptables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -m conntrack --ctstate INVALID -j DROP
iptables -I TCP -p tcp -m recent --update --seconds 60 --name TCP-PORTSCAN -j REJECT --reject-with tcp-rst
iptables -D INPUT -p tcp -j REJECT --reject-with tcp-rst
iptables -A INPUT -p tcp -m recent --set --name TCP-PORTSCAN -j REJECT --reject-with tcp-rst
iptables -I UDP -p udp -m recent --update --seconds 60 --name UDP-PORTSCAN -j REJECT --reject-with port-unreach
iptables -D INPUT -p udp -j REJECT --reject-with icmp-port-unreach
iptables -A INPUT -p udp -m recent --set --name UDP-PORTSCAN -j REJECT --reject-with icmp-port-unreach
iptables -A INPUT -p udp -m conntrack --ctstate NEW -j UDP
iptables -A INPUT -p tcp --syn -m conntrack --ctstate NEW -j TCP
iptables -A INPUT -p udp -j REJECT --reject-with icmp-port-unreachable
iptables -A INPUT -p tcp -j REJECT --reject-with tcp-rst
iptables -D INPUT -j REJECT --reject-with icmp-proto-unreachable
iptables -A INPUT -j REJECT --reject-with icmp-proto-unreachable
When I run the script, it gives me this error:
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
The problem is caused by the last 4 lines. What do I do wrong?
(I use current x64 Arch).
Last edited by dopalek (2014-06-06 11:59:11)
Gcool wrote:You're probably getting those warnings because you're trying to delete (iptables -D) rules that don't exist. While this is no big deal on itself (the rest of the rules will still be applied); you could consider simply omitting the 3 "iptables -D" rules from your config, which should get rid of the warnings.
You are right, thank you, I didn't notice it before.
Anyway I guess -D rules from wiki are in case somebody has own rules applied before. It could be explained in the wiki to avoid confusion in future.
Last edited by dopalek (2014-06-06 12:02:30)
Similar Messages
-
{SOLVED} iptables No chain/target/match by that name.
I have two laptop (exactly same kernel and everything) and this command :
iptables -A INPUT -p tcp -m tcp --dport 15678 -j ACCEPT
Fail on one machine and run on another one without problem.
iptables 1.4.18-1
linux 3.9.2-1
this is my /etc/iptables/iptables.rules (on both laptops) :
# Generated by iptables-save v1.4.10 on Sun Mar 27 14:58:52 2011
*filter
:INPUT ACCEPT [2074481:2388158591]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [1936543:146051200]
COMMIT
# Completed on Sun Mar 27 14:58:52 2011
# Generated by iptables-save v1.4.10 on Sun Mar 27 14:58:52 2011
*nat
:PREROUTING ACCEPT [4440:528768]
:INPUT ACCEPT [2752:365640]
:OUTPUT ACCEPT [14858:1257918]
:POSTROUTING ACCEPT [14861:1258098]
-A PREROUTING -d 10.10.34.34/32 -p tcp -j DNAT --to-destination 127.0.0.1
-A OUTPUT -d 10.10.34.34/32 -p tcp -j DNAT --to-destination 127.0.0.1
COMMIT
# Completed on Sun Mar 27 14:58:52 2011
# Generated by iptables-save v1.4.10 on Sun Mar 27 14:58:52 2011
*mangle
:PREROUTING ACCEPT [2076169:2388321719]
:INPUT ACCEPT [2074481:2388158591]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [1936543:146051200]
:POSTROUTING ACCEPT [1942627:147067228]
COMMIT
# Completed on Sun Mar 27 14:58:52 2011
( as you may know, in my country Iran, they block internet, so I use this rules to block their ip, 10.10.34.34 is that IP)
ps - The iptables command is from pacserve. I want to setup pacserve, but in one machine I get this error.
Last edited by fzerorubigd (2013-05-22 06:19:39)Thank you ) It was the problem.
-
Trigger execution of a CR report from SAP BW Process chain
Hi,
we want to trigger execution of a Crystal Report from a BW process chain.
What is the best way to do this?
Our CR reports are not saved to BW.
We are currently investigation the option of using a file event on the BO server and using an ABAP program step in the process chain to create the file using FTP. But we want to know if there is an easier way of doing this?
Thanks and regards
JarleHello Nathan,
your solution with the FTP script and a file being moved to the BO server sounds very interesting!
Actually that's what I would need to implement in my project.
Would it be possible for you to give me some information on how to write such a script and how to call it from the Process Chain? Any hint would be really precious!
Thank you in advance!
Best regards,
Hubert -
How to check wether local system has blocked by firewall from program.
i am a user in my LAN area. i don't have admin rights. in our LAN few system has blocked by firewall others not blocked .
how can i check wether local host is blocked or not by firewall from java network program ?.You can execute some kind of firewall util (if any) and parse output to receive configuration and check is address blocked or no. But if you have no admin rights - it will not help you.
Actually there is no clear way to detect was packet blocked by FW or just lost somethere. -
Transform data from multiple sources to single target in bpel 10.13.1.0
Hi,
I need to transform data from mulitple sources to single target schema.
Please any one can give some idea.
Regards
janardhanWe are gone a other way merge multiple information into one target.
First we have created a wrapper variable with the structure of the target variable that we want use in the transformation.
With a assign element we filled the wrapper variable with information from the inputvariable of the bpel process and some addtional information.
Then we called in the transformation the wrapper variable as source and the target variable as target.
We have used that way in some bpel process and it works for us.
Within Oracle SOA Suite 11g, there is the mediator component that does simply routing
and transformation functionality within a composite (SCA).
That's all, I hope that help.
Michael -
Controlling Application Layer Firewall from Command Line Not Working
We are trying to manage the OS X Application Layer Firewall for Mountain Lion from the command-line. We have several hundred Macs that we need to manage and it isn't possible to have someone log in to each one to modify settings. We have used socketfilterfw in the past, and can still use it to add items but we can't seem to manage it at all. We are also having issues trying to remove certain items although it appears we can still add items.
When we try to block or unblock the feedback we get is that the item has been configured however when we do a list the item attributes haven't changed.
When we try to verify if the item has been signed we get an error Killed: 9
When we try to sign an item we get the same error, Killed: 9
With one item specifically, when we try to remove it we get a Segmentation Fault 11 although we can add that same item just fine.
It should be noted that doing all of this through the GUI works fine.
Does anyone have any ideas on how to manage the firewall from te command-line that works? Has socketfilterfw been depricated and replaced by something else? Is this just a bug? I am placing the same information in a bugreport but just wanted to check with the coIt's a known issue that apparently hasn't been fixed. Not a high priority for Apple Engineering, it seems.
-
How to run insert/update/delete from CDC Change table to target using OWB
I am planning to set up CDC and publish CDC change table as source data into to OWB. I have come across where I am confused how to apply changes from CDC change table to target database using OWB. For i.e. change tables is containing information like
operation$, cscn$,commit_timestamp$,xidusn$,....,list of column name
D,12323223,8/28/2008 1:44:32PM,24,.....,list of column value that have to be deleted from target
UO,12323224,8/28/2008 1:45:23PM,24,.....,list of column value that have to be updated in target.
Please advice or give me some hint. Thank you.Hi,
you can wait for 11gR2 with CDC integration or build most of the code outside the owb. To use CDC you must do this things (http://www.oracle.com/technology/oramag/oracle/03-nov/o63tech_bi.html):
1. Identify the source tables.
2. Set up a publisher.
3. Create change tables.
4. Set up a subscriber.
5. Subscribe to the source tables, and activate the subscription.
6. Set up the CDC window.
7. Prepare a subscriber view.
8. Access data from the change tables.
9. Drop the subscriber view, and purge the CDC window.
10. Repeat steps 6 through 9 to see new data.
You can do only a few of this inside owb, most of it must be done outside.
Regards,
Detlef -
Revision: 17029
Revision: 17029
Author: [email protected]
Date: 2010-07-22 19:08:20 -0700 (Thu, 22 Jul 2010)
Log Message:
Update all samples to remove target player version from calls to the mxmlc target. Now we will just use the target player version from the flex-config.xml file. As this is used to locate playerglobal.swc, it's unlikely we would need this to be different than what is in flex-config.xml.
Turn the ocx target for installing the player back on again and update it to use the new silent uninstall and install switches for the 10.1 player.
checkintests: passed
Modified Paths:
blazeds/trunk/apps/samples/WEB-INF/flex-src/dashboard/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/inventory/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/runtimeconfig-messaging/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/runtimeconfig-remoting/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-101/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-chat/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-datapush/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-httpservice/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-remoteobject/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-update/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-webservice/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/traderdesktop/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/chat/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/collaboration/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/companymgr/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/feedstarter/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync01/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync02/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync03/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync04/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync05/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync06/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/simplepush/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/spring-blazeds-101/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/spring-blazeds-security-101/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/traderdesktop/build.xml
blazeds/trunk/build.properties
blazeds/trunk/build.xml
blazeds/trunk/sampledb/flexdemodb/flexdemodb.properties
blazeds/trunk/servers/apache-tomcat-6.0.14/conf/tomcat-users.xmlHi Chris,
I tried removing and adding back the dialpeer 101 and adding .T to 501 but still the same result. Please help.
Please see the following:
SEC-HO-VGATEWAY01#show dial-peer voice summ
dial-peer hunt 1
AD PRE PASS OUT
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET STAT PORT KEEPALIVE
501 voip up up 0 syst
1001 voip up up 5... 1 syst ipv4:10.13.14.21
1002 voip up up 1...$ 1 syst ipv4:10.13.14.21
103 voip up up 911$ 1 syst dns:toronto2.voip.ms
102 voip up up 1[2-9]..[2-9]...- 1 syst dns:toronto2.voip.ms
...$
101 voip up up [2-9]..[2-9]....- 1 syst dns:toronto2.voip.ms
..$
SEC-HO-VGATEWAY01#show run | sec dial-peer voice 501
dial-peer voice 501 voip
incoming called-number .T
voice-class sip bind control source-interface Loopback0
voice-class sip bind media source-interface Loopback0
dtmf-relay rtp-nte
codec g711ulaw
no vad -
Fetch the netprice from the validity period which always matches with the
Let me describe the same.
Suppose the PO creation date is 04.07.2007
The conditions for an item in a contract for the PO are as follows;
1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
We need to always fetch the netprice from the validity period which always matches with the PO creation date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
This data is then used to fetch the get the netpr data from EKPO.
what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date..
Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
p_c_k_bstyp TYPE ebstyp
p_p_bukrs TYPE bukrs
p_p_ekorg TYPE ekorg
p_p_ekgrp TYPE bkgrp
*Begin of Mod-004
fp_p_cernam type ty_r_ernam
p_p_cernam TYPE ernam
*End of Mod-004
p_s_werks LIKE s_werks[]
p_s_matnr LIKE s_matnr[]
p_s_lifnr LIKE s_lifnr[]
p_s_val_dt LIKE s_val_dt[].
*mod-002
data : l_amount type BAPICURR_D, " Net price
l_waers TYPE waers, " Currency Key
l_eff_amount type BAPICURR_D. " Effective value
data: l_v_netpr type bprei.
*mod-002
SELECT ebeln
bukrs
bstyp
aedat
ernam
lifnr
zterm
ekorg
ekgrp
waers
wkurs
kdatb
kdate
inco1
INTO TABLE i_ekko
FROM ekko
WHERE ebeln IN p_s_cebeln
AND bstyp EQ p_c_k_bstyp
AND bukrs EQ p_p_bukrs
AND ekorg EQ p_p_ekorg
AND ekgrp EQ p_p_ekgrp
*Begin of Mod-004
AND ernam EQ p_p_cernam
AND ernam IN fp_p_cernam
*End of Mod-004
AND lifnr IN p_s_lifnr
AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
IF sy-subrc EQ 0.
Populates internal table i_ekpo using EKPO table.
SELECT ebeln
ebelp
loekz
txz01
matnr
werks
ktmng
menge
meins
bprme
netpr
peinh
webaz
mwskz
uebto
untto
erekz
pstyp
knttp
repos
webre
konnr
ktpnr
ean11
effwr
xersy
aedat
prdat
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_ekko
WHERE ebeln = i_ekko-ebeln
and aedat = i_ekko-aedat
AND werks IN p_s_werks
AND matnr IN p_s_matnr.
LOOP AT i_ekpo INTO rec_ekpo.
MOVE rec_ekpo-ebeln TO rec_contr-ebeln.
MOVE rec_ekpo-ebelp TO rec_contr-ebelp.
MOVE rec_ekpo-loekz TO rec_contr-loekz.
MOVE rec_ekpo-txz01 TO rec_contr-txz01.
MOVE rec_ekpo-matnr TO rec_contr-matnr.
MOVE rec_ekpo-werks TO rec_contr-werks.
MOVE rec_ekpo-ktmng TO rec_contr-ktmng.
MOVE rec_ekpo-menge TO rec_contr-menge.
MOVE rec_ekpo-meins TO rec_contr-meins.
MOVE rec_ekpo-bprme TO rec_contr-bprme.
MOVE rec_ekpo-netpr TO rec_contr-netpr.
move l_v_netpr TO rec_contr-netpr.
mod-002
read table i_ekko into rec_ekko with key
ebeln = rec_ekpo-ebeln.
l_waers = rec_ekko-waers.
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-netpr
IMPORTING
AMOUNT_EXTERNAL = l_amount.
rec_contr-netpr = l_amount.
mod-002
MOVE rec_ekpo-peinh TO rec_contr-peinh.
MOVE rec_ekpo-webaz TO rec_contr-webaz.
MOVE rec_ekpo-mwskz TO rec_contr-mwskz.
MOVE rec_ekpo-uebto TO rec_contr-uebto.
MOVE rec_ekpo-untto TO rec_contr-untto.
MOVE rec_ekpo-erekz TO rec_contr-erekz.
MOVE rec_ekpo-pstyp TO rec_contr-pstyp.
MOVE rec_ekpo-knttp TO rec_contr-knttp.
MOVE rec_ekpo-repos TO rec_contr-repos.
MOVE rec_ekpo-webre TO rec_contr-webre.
MOVE rec_ekpo-konnr TO rec_contr-konnr.
MOVE rec_ekpo-ktpnr TO rec_contr-ktpnr.
MOVE rec_ekpo-ean11 TO rec_contr-ean11.
MOVE rec_ekpo-effwr TO rec_contr-effwr.
mod-002
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-effwr
IMPORTING
AMOUNT_EXTERNAL = l_eff_amount.
rec_contr-effwr = l_eff_amount.
*mod-002
MOVE rec_ekpo-xersy TO rec_contr-xersy.
APPEND rec_contr TO i_contr.
CLEAR: rec_ekpo,rec_contr.
mod-002
CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
mod-002
ENDLOOP.
Modifying i_contr using i_ekko.
SORT i_ekko BY ebeln.
LOOP AT i_contr INTO rec_contr.
READ TABLE i_ekko INTO rec_ekko WITH KEY
ebeln = rec_contr-ebeln
BINARY SEARCH.
MOVE rec_ekko-bukrs TO rec_contr-bukrs.
MOVE rec_ekko-bstyp TO rec_contr-bstyp.
MOVE rec_ekko-aedat TO rec_contr-aedat.
MOVE rec_ekko-ernam TO rec_contr-ernam.
MOVE rec_ekko-lifnr TO rec_contr-lifnr.
MOVE rec_ekko-zterm TO rec_contr-zterm.
MOVE rec_ekko-ekorg TO rec_contr-ekorg.
MOVE rec_ekko-ekgrp TO rec_contr-ekgrp.
MOVE rec_ekko-waers TO rec_contr-waers.
MOVE rec_ekko-wkurs TO rec_contr-wkurs.
MOVE rec_ekko-kdatb TO rec_contr-kdatb.
MOVE rec_ekko-kdate TO rec_contr-kdate.
MOVE rec_ekko-inco1 TO rec_contr-inco1.
MODIFY i_contr FROM rec_contr.
ENDLOOP.
ENDIF.
REFRESH: i_ekko,
i_ekpo.
CLEAR : rec_ekko,
rec_ekpo,
rec_contr.
ENDFORM. "select_contracts
Thanks.Hi,
Please get the valid condition ( based on date ) from A016 (MK & LPA). With the appropriate KNUMH read the Condition header. You can access the different condition items viz., PB00, RA00 etc., for the values from table KONP. Further if you have Value scales / Quantity scales, you can read the data from KONM, KONW.
An additional tips: in KONP, if you have a condition like RA00 - Rebate, the value will be multiplied by 10 and saven in database to accomodate the discount to the third decimal.
I could not completely understand your requirements like nature of development ( Is it a Report / SAP Script ??) you are working etc., so that I could help you precisely.
Hope this helps,
Best Regards, Murugesh AS
Message was edited by:
Murugesh Arcot -
From and/or subject don't match msg body
Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird -
How to upload a song from the i phone to itunes match
how to upload a song from the i phone to itunes match
Hi Chandrapp,
Welcome to the Apple Support Communities! I understand that you want to upload a song from your iPhone to iTunes Match. Local songs on your iPhone will not be uploaded to iCloud, you will need to transfer that song into your iTunes Library on your computer and upload it to the iCloud from there. The information can be found in the following article.
iTunes Store: Subscribing to iTunes Match
http://support.apple.com/kb/ht4914
When you subscribe to iTunes Match from an iOS device, your local tracks will not be matched or uploaded to iCloud. You will need to sign in with your Apple ID from a computer in order to match and upload your local music library.
Hope this helps,
-Joe -
Lost my hard drive. How to transfer from IPOD to MacBook -OR!- Match?
I lost my entire harddrive on my W7 PC. I have most (but not all) of my music on my iPod. I just purchased a MacBook Pro, and iPhone 5, and subscribed to iTunes Match. QUESTION: How can I transfer all the songs on my iPod, from the ipod up into iTunes Match? In order to get those songs on ITunes in the new MacBook. Or is there a better way? Perhaps it is better to try and rip the songs off the iPod into iTunes and then up to iTunes Match??
(Point of note - not all of these songs that I lost were from CD's, or from iTunes purchases. Yes, many of them came from YouTube. I mention it so as to save any misdirection people might offer as a solution) Thank You!You can use MobiKin Assistant for iOS to transfer data or files from iPod to computer directly. It is an excellent software and can sync data from iOS device to computer easily. These data including text messages, contacts, music, photos, video, tv shows, voice memos, podcasts, ringtones, books, etc. Beside, it can support almost all iOS devices, including the latest iPhone 6 plus/6, iPhone 5s/5/4s/4, iPad air/mini, iPod, etc. High compatibility make it become the one of most professional iOS tools. You can have a free try. Believe it can help you a lots.
Source(s): http://www.mobikin.com/idevice/transfer-music-from-ipod-to-mac.html -
After syncing my music to my iphone from itunes, my artist information doesnt match what shows on my itunes
You will have to sync your iphone to this computer first, erasing the current content and replacing wioth content from the new computer.
Make sure you have copied everything from the old comptuer to the new one first. -
Why would a song I purchased from iTunes be ineligible for iTunes match?
Why would two songs I purchased from iTunes be ineligible for iTunes match? Both are part of a total album and the rest were uploaded okay.
Thx
edAre they old songs that you may have purchased from a different store id years ago?
If your have old purchased songs that are drm protected and they are not associated with the store id that you are currently using then they will not be eligible.
I would burn to a disc and then rip back to your library.
Burn to the cd. Deletel the old files from your libary and delete the files don't keep them. Rip the cd back.
After you have tested the ripped songs back then empty your trash, or back up the old drm protected songs in a seperate folder. -
Software Raid and Kernel Panic (from wiki page) [SOLVED]
I am trying to setup a RAID 5 array using the instructions on the wiki:
http://wiki.archlinux.org/index.php/Ins … AID_or_LVM
I get through the instructions (have actually done it several times now) and get the following error:
io scheduler deadline registered
io scheduler cfq registered
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP establised hash table entries: 262144 (order: 9,3145728 bytes)
input: AT Translated Set 2 keyboard on isa0060/serio0
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03f6580(lo)
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
VFS: Cannot open root device "md0" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
The grub menu.lst
root (hd0,0)
kernel /vmlinuz26 root=/dev/md0 ro
I setup three partitions on IDE drives
/dev/md0 - root (8 GB / drive)
/dev/md1 - boot (100 MB / drive)
/dev/md2 - swap (1 GB / drive)
I have three drives for the area with three partitions on each:
hda1 - boot
hda2 - swap
hda3 - root
I did skip the LVM step in the wiki pages.
fstab
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/cdrom /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0 /mnt/fl vfat user,noauto 0 0
/dev/md0 / reiserfs defaults 0 0
/dev/md2 swap swap defaults 0 0
/dev/md1 /boot reiserfs defaults 0 0
mkinintrd.conf
REMOVE_IDE=
REMOVE_SCSI=
REMOVE_SATA=1
REMOVE_CDROM=
REMOVE_USB=1
REMOVE_FW=1
REMOVE_RAID=
REMOVE_CRYPT=1
REMOVE_FS=
REMOVE_DM=
RAID_ROOT_ARRAY="md0"
RAID_ROOT_DEVICES="/dev/hda3 /dev/hdb3 /dev/hdc3"
HOSTCONTROLLER_IDE=
HOSTCONTROLLER_SCSI=
HOSTCONTROLLER_SATA=
HOSTCONTROLLER_USB=
FILESYSTEMS=
CRYPT_DEVICE=
ADD_MODULE=
REMOVE_MODULE=
The system is a dual PIII using the arch ISO 7.1 release.
Any thoughts on what is wrong with my setup? Or something I can try. I'm game for just about anything in my test environment to try and get it working.
Thanks,
Chris....After the basketball games where over tonight I had a thought (and a little research). The install iso I was using was a pre-release of 0.7.1. When I downloaded the real mccoy and did a fresh install following the instructions on the wiki, all worked flawlessly!
Chris....
Maybe you are looking for
-
Item 000 RN1D25 /4105140000 / commitment budget for year 2011 exceeded (
Dear All, Iam using FR32 for Budget Uploading in ( Funds Management ) at the time of uploading it is giving like this message Item 000 RN1D25 /4105140000 / commitment budget for year 2011 exceeded In document item 000 RN1D25 /4105140000 /, commitment
-
How to upload non-matched, non-uploaded mp3s?
I have about 100 or so songs that weren't included in the match for various reasons (bigger than 200MB or less than 96 Kbps). Is there a way I can manually sync them to my iphone? I tried to do it the old fashioned way but the option to add the pla
-
In Executable program displaying results in custom screen.
Hi, I have a executable program, when the program display's the out put of this program I need to display output in custom screen (like screen 100) instead of displaying in default List screen. Can any one tell me how to create and display output in
-
Does anybody know how to fix internal server error? This has never happened before?
-
SAPOsCol running but not working (shared memory not available)
Dear Forum, We have just set new passwords for SAP AD users (incl SAPService<SID> and <SID>adm), after this restarted SAP instances and servers / clusters). Everything came up well and all services, incl SAPOsCol started up automatically with the new