From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Similar Messages

  • Printing from InDesign and Photoshop - colors don't match

    I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
    (cross-posted in InDesign forum)

    I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

  • Songs and album covers don't match up?

    On my 4s, when I enabled Icloud and downloaded my music library something got out of sync. Now, most songs don't match up to the album cover etc. displayed on my screen. I have tried deleting and downloading again and the problem remains. Any suggestions?

    Album cover images depend on whether you downloaded the album/song off the pre-installed iTunes store on the iPod or you downloaded an mp3 from your computer into iTunes then synced it to the device, the only solution in this case without consulting apple help directly would be to try purchasing a song or album from the on-device iTunes store and seeing if you get a cover image then, otherwise I'd seek help from apple themselves as it may be a software issue and you could possibly get your device looked at or replaced under your 1 year warrantee. That is if your still covered.
    hope this helps, olly.

  • SIP and SMTP domains don't match

    Hi,
    We’ve a situation where SIP, SMTP and AD domain are different than each other and I am sure this will present integration issues at the least...
    Speaking from LYNC 2013 and exchange 2010/2013 integration standpoint, could someone please point out to integration process under below circumstances where
    SIP domain         uc.contoso.com
    SMTP domain      contoso.com
    AD domain          contoso.net
    Also, how would exactly the logon will occur in this situation?
    I'd appreciate if you could point me to relevant document please.
    Regards, Pushkal MishrA, This posting is provided “AS IS” with no warranties and confers no rights. I request you to test the solution in lab and post successful outcome you should try this on production.

    Hi Pushkal Mishra,
    It’s recommend to use the same SIP and SMTP address.
    But if they are not the same, they will still work properly if you take some additional work.
    I’m assuming that you have published the correct SAN certificate that has every expected SAN name for each domain, then you have to create an additional SRV record for uc.contoso.com.
    _autodiscover._tcp.uc.contoso.com           
    mail.contoso.com        443
    In general, Lync will look at your primary SMTP address and attempt to use it to find the EWS URL via Autodiscover after signing in. But if the SIP and SMTP address does not match, you will receive
    a security prompt “Lync cannot verify that the server is trusted for your sign-in address”.
    To avoid the issue, the best solution in my opinion is to use SRV records for Autodiscover to redirect Lync to the mail.contoso.com A record. (Delete the Autodiscover A record)
    Best regards,
    Eric

  • Quicktime mpeg-2 and quicktime versions don't match

    I bought quicktime pro and the mpeg-2 add on but the program tells me the versions are not compatible even though they both say the same version identification.
    Does anyone know why it tells me the versions are different when they aren't ?

    sorry for not putting enough info.
    i just bought the quicktime mpeg-2 installer and quicktime pro upgrade for quicktime 7 yesterday(3-15-2009). i installed the pro upgrade and the mpeg-2 installer.
    i checked both quicktime and the mpeg-2 installer to see what versions they are. they both say version 7.60.92.0, yet i keep recieve this message:
    "QuickTime MPEG2 failed to load because the versions of QuickTime and QuickTime MPEG2 do not match."
    But they match exactly. I am stumped. i even uninstalled and reinstalled both of them but still the same message.

  • Photo names and thumb names don't match

    Apologies if this issue exists and I haven't spotted it. I have looked. Working on iPhoto 5.0 on a G3 iBook, photos held on an external 60gb LaCie drive.
    My basic issue is that the names of my photos and the names of thumbs do not always match. The thumb of the same no. displays a different photo. And the thumb in the folder of a photo is often the same image but has a different no. E.g. IMG-0008.jpg has a thumb called 1485.jpg with a different date, but the image is the same.
    My initial question is one of fixing. Can I somehow get rid of all these thumbs and force iPhoto into recreating them? It looks to me from reading the forum that this would be safe and possible via rebuild, but given the mess I'm in I thought I'd like to check first!
    Can I also delete folders of Originals (knowing the risk that changes are then permanent)? Can I do this anywhere other than at iPhoto library folder level, which appears to be a bad way to stuff?
    There's a history to all this of course, which I'll go into if there's anyone who thinks they may be able to explain why it's happened. Otherwise fixing it would at least be a good first step as I've no idea if it's likely to be causing other problems in the software performance!
    Thanks, ever hopeful!

    Oh sorry, that is a screenshot for iPhoto 6. For iPhoto 5 the Data folders are in each date folder.
    For you then, just delete the three files, then do your rebuild.
    If the thumbnails and photos are still not correct after the rebuild you can create a new library and import the photos from the old. When you do this you are just importing the photo files and new thumbnails will be created.
    Here are the directions:
    Close iPhoto
    Rename your messed up iPhoto Library to "iPhoto Library_old"
    Drag this library to your desktop
    Hold down the Option key and launch iPhoto
    This is the window you will get
    Create a new library or choose a library to open
    Choose to create a new library
    Once this new empty library is open it is time to import the images from your old library
    Go to File>add to library
    Navigate to the old library on your desktop and highlight it in the window, then click the "import" button.
    iPhoto will start importing the images from your old library
    This is what to expect:
    Your images will be imported in nice dated rolls. (make sure your view is set to sort by rolls to see it) There are a couple of caveats to this. You will get rolls named "Originals" These rolls will contain your video clips and your original images that you had edited. If you had RAW files they would be in those rolls too (I don't do RAW, so I don't know for sure) Delete what you don't want from those rolls. You will also get the jpeg pointer files to your video clips imported. They will just be jpegs and will not point to the video clips anymore as iPhoto made new ones when the clips were imported again. You can delete those. they should be in a roll right next to the newly imported video clips so they are not hard to find. The thumbnail files don't get imported as iPhoto makes new ones when the images are imported.
    Once all you images have been imported, check through the library and make sure everything looks ok.
    You can now start making your Albums, and do your keywords or any other organizational steps.
    You can also delete the old library on the desktop.
    It is also a good time to backup this new library to CD/DVD by burning the iPhoto LIbrary folder in the Finder, or copying the iPhoto Library folder to an external drive formatted for Macs, or copying the iPhoto LIbrary folder to an iPod.
    Good luck!

  • Account name and user folder don't match

    Hi,
    So I don't know how to change my 'User Folder' name to match my Account name.
    The name of my user folder, 'sickjestrer4', was the Apple ID I entered when I first registered my Mac. And it became the name of the folder automatically.
    My account name, however, is my real name, Jack XXXXX.
    I want the two to match and both be called 'Jack XXXXX'.
    I've tired a few things unsuccessfully and am turning here for some help.
    I attached some links to a few photos that might help for clarity.
    http://img96.imageshack.us/img96/1655/titlerc.jpg
    http://img176.imageshack.us/img176/1291/accountk.jpg
    Any help would be appreciated.
    Thanks

    Your username on your home folder is always taken from the short name. You can change the short name of your account by right clicking on the user within the accounts pane in System Preferences and selecting Advanced Options. However this is not a smart move. It can be a complicated and painstaking process moving all required aspects and settings to the new short named account.

  • How come playlists and total songs don't match up when syncing in iTunes?

    Hello,
    I own an iPod Touch 5G and sync it regularly via usb cable to my MacBook Pro 17", using iTunes 11. I seem to have a terrible time understanding the concept of syncing music/movies via the "selected playlists, artists, albums, and genres" option. That doesn't mean that I'm choosing to sync manually, just means that I'm syncing only certain playlists/content, even if done "automatically" whenever I connect device with iTunes, correct?
    For some time now, well before iTunes 11 came out, I haven't been able to accurately sync the music and videos I'd like to "push" to the iPod Touch. No matter how many times I sync or think I'm removing content from the iPod touch by way of iTunes, I always end up with more on the iPod than I ever wanted. It seems like that capacity bar at the bottom of iTunes screen telling me what's on the Touch is a big joke, as it never seems to accurately show what's on there.
    For example, I have a lot more songs and videos in iTunes than what my Touch has space for, so I can never have all my content syncing to the Touch. I have created numerous playlists inside iTunes, in fact, this is how I organize my music for listening.  I was under the assumption that whatever playlists I check while inside of iPod touch area of iTunes when the devices is connected, those are the ONLY playlists and songs that will be on the iPod touch. This is never the case. After checking the desired playlists and syncing, I have the correct number of desired playlists on the iPod (let's say it's currently 10 playlists), but in actuality, when I go to the iPod touch after disconnecting from iTunes, there's a LOT more songs on iPod than just the ones within those 10 playlists. It's like when I got rid of some of the playlists on the iPod touch, the songs never got erased, only the playlists they were place in.
    So, my question is, in short, how do I have ONLY the songs within my 10 playlists and no more after syncing with iTunes? Similar issue pertains to my synced videos/home movies. They are never erased from Touch, even though certain ones are unchecked within iTunes.  If somebody could shed light on this issue, I'd greatly appreciate it! I feel like something designed to be so easy and logical has been anything but that.

    when you play the CD in your laptop on your home screen a Cd should pop up under the name of the album. Than when you open itunes it will probly say something like "let this CD download" or something like that. If it doesn't than automaticlly while the CD is importing to your itunes a page will pop up with a progess of the CD download.
    Hope that helped.

  • Volume size and Capacity size Don't match

    Hello,
    I have a fileshare running Windows 2008 R2 that has a Dynamic Disk that is 1670.78 GB formatted NTFS.  The problem is if I look at the properties of the volume it says that the capacity is 987 GB.  I'm not sure how to get the capacity up to the
    full size of the volume.
    The histry is we had a 2003 x64 file share that started life as a scratch place to store files so was RAID 0, according to the original specs for the project that was what they wanted.  After time passed the share became permenant storage and loosing
    it was actually a problem.  At that point I wanted to make it RAID 5.  However I also was hoping to keep the Shadow Copies to enable them to find previous versions of files so I ended up creating an iSCSI target and mirroring them through windows,
    which made a full backup including the copies.  I then broke the mirror rebuilt the RAID and then re-mirrored to the new volume.  However becuase of going from RAID 0 to 5 I lost some space so had to resize the volume.  I used a 2008 R2 machine
    to shring the volume and then raised the capacity back up to the full size.  However the space available never actually grew.
    At that point I figured the problem was from the machine still running 2003 R2 and having been touched by a 2008 R2 machine.  So I scheduled an upgrade and the server is now running 2008 R2, however I am still missing 600GB.
    I can't expand the Volume at this point since there is no free space on the disk, and if I try to shrink the volume I get the option of how much to shrink, then after saying ok I get the error: "The parameter is incorrect."   When I look in the
    Application Log I see an error saying the volume wasn't defragmented because an error was encountered. "The parameter is incorrect. (0x80070057)"
    Please let me know any suggestions or if there is any additional information that would be helpful.
    Thank you,
    Eric

    Hello,
    Here is the chkdsk result:
    CHKDSK is verifying files (stage 1 of 3)...
      406672 file records processed.
    File verification completed.
      3368 large file records processed.
      0 bad file records processed.
      0 EA records processed.
      0 reparse records processed.
    CHKDSK is verifying indexes (stage 2 of 3)...
      469986 index entries processed.
    Index verification completed.
      0 unindexed files scanned.
      0 unindexed files recovered.
    CHKDSK is verifying security descriptors (stage 3 of 3)...
      406672 file SDs/SIDs processed.
    Security descriptor verification completed.
      31658 data files processed.
    CHKDSK is verifying Usn Journal...
      314844376 USN bytes processed.
    Usn Journal verification completed.
    CHKDSK discovered free space marked as allocated in the
    master file table (MFT) bitmap.
    Windows has made corrections to the file system.
    1035144191 KB total disk space.
     912448340 KB in 341209 files.
        165660 KB in 31659 indexes.
             0 KB in bad sectors.
        809607 KB in use by the system.
         65536 KB occupied by the log file.
     121720584 KB available on disk.
          4096 bytes in each allocation unit.
     258786047 total allocation units on disk.
      30430146 allocation units available on disk.
    Even though it reports altering the free space when I go look at the disk I see this:
    (This is the best command I've found to copy into here, if you know a better one please let me know)
    DISKPART> detail volume
      Disk ###  Status         Size     Free     Dyn  Gpt
    * Disk 1    Online         1670 GB      0 B   *
    Read-only              : No
    Hidden                 : No
    No Default Drive Letter: No
    Shadow Copy            : No
    Offline                : No
    BitLocker Encrypted    : No
    Installable            : No
    Volume Capacity        :  987 GB
    Volume Free Space      :  116 GB
    I don't think this is just the difference between size and size on disk, I think for some reason my MFT or something is screwed up.
    Please let me know what you would like me to try next.
    Thanks,
    Eric

  • LIghtroom and Bridge Keywords don't match

    I use PhotoMechanic (with the stationary pad setup) to ingest NEF images, then convert them DNG with DNG Converter. I add keywords using PhotoMechanic, Bridge and Expression media and Edit using PS to create web versions.
    I'm trying to use LR 1.3 and starting to import them all.
    When I look at the keywords in LR 1.3 the DNG are all the same, however the JPG in LR 1.3 are different from the other three (PhotoMechanic, Bridge, Expression Media). I've read metadata from the files in LR 1.3 and there is no change to the jpg.
    It looks like LR 1.3 does not extract metadata from JPG the same way as Bridge does.
    Any ideas why?

    There are a lot of profiles for Raw-images but much less for JPG images.
    Lr will display only those lens profiles that apply for the file format in question. So when you have a JPG image the profiles for Raw images will not be displayed in Lr, and vice versa.
    If you don't have the correct lens profile in you list you have to download it.
    For this you need the Adobe Lens Profile Downloader.
    And for this program you need Adobe Air.
    Download both programs from Adobe's website - they are free of charge.
    Then install Adobe Air first, and when that is installed, install the Lens Profile Downloader.
    Once it is installed just open it, it is self-explanatory and will display all available lens profiles once you have selected your camera and lens makes.

  • Final Cut Express HD and Animoto resolutions don't match

    I imported a 720p video into Final Cut Express HD from Animoto.com (created online with Animoto and downloaded the MP4).
    I added a song and a couple of bookend credits then exported to QuickTime Movie. The resolution of the FC export is significantly lower than the original MP4. Significantly lower. I've tried almost all the export settings in the "QuickTime Conversion" export, but nothing comes close to the resolution of the imported MP4.
    Can anyone see what I might be doing wrong?

    Have a read here:
    https://discussions.apple.com/message/19146995#19146995
    Sounds like your Easy Setup and clips are scrambled to me resulting in degraded footage.
    BTW: MP4 should be transcoded to match an Easy Setup.
    Codecs used in FCE are editing codecs, MP4 is for delivery.
    Al

  • Mail files on server and webmail view don't match

    Hi there,
    First-time poster... sorry if this has been addressed ad infinitum.
    We are running Msging Server 6.2-6.01 (according to 'imsimta version').
    I have a problem with a user's account. The account has a mailQuota of 20Mb, of which about 89% is currently used. If I log in to webmail as the user and go to 'Manage Folders', it says that there are 13Mb of messages in the 'Sent' folder, in 19 messages. However, when I look at the messages in the 'Sent' folder through the webmail interface, the size of the 19 messages only adds up to around 4Mb. If I change the View dropdown from 'Default' to 'All' when looking at this folder in webmail, it shows that there are 435 messages in the 'Sent' folder. The 416 messages that appear when I select 'All' have a red 'X' mark in the envelope icon. If I get a shell session to the mail server and look in the user's 'Sent' folder, all the 435 messages are there in the filesystem.
    From perusing the archives of this forum, it looks like I need to run 'reconstruct' for this user's account (or their 'Sent' folder) to fix this problem. I downloaded the Admin Guide and looked at the doco for the 'reconstruct' command, but it's a bit vague to me... So...
    Should I run 'reconstruct' to fix this problem?
    If so, what syntax should I use to just 'reconstruct' this user's 'Sent' folder?
    What would the syntax be to 'reconstruct' all folders for this user?
    I see that if I don't use the right arguments to 'reconstruct', it will reconstruct all accounts on the server, which I definitely don't want 8-)
    Thanks in advance,
    Guido.

    Hi there,
    First-time poster... sorry if this has been addressed
    ad infinitum.
    We are running Msging Server 6.2-6.01 (according to
    'imsimta version').
    I have a problem with a user's account. The account
    has a mailQuota of 20Mb, of which about 89% is
    currently used. If I log in to webmail as the user
    and go to 'Manage Folders', it says that there are
    13Mb of messages in the 'Sent' folder, in 19
    messages. However, when I look at the messages in the
    'Sent' folder through the webmail interface, the size
    of the 19 messages only adds up to around 4Mb. If I
    change the View dropdown from 'Default' to 'All' when
    looking at this folder in webmail, it shows that
    there are 435 messages in the 'Sent' folder. The 416
    messages that appear when I select 'All' have a red
    'X' mark in the envelope iconYep. These messages are "marked for deletion". The user hasn't "compressed the folders", which is what allows Messaging Server to delete the files overnight.
    You can set an expiration rule for "deleted", and expire these automatically, if you like, or you can suggest the user set his mail client to "compress folders on exit", or even compress them, now.
    This isn't something broken, so there's nothing to "fix.
    . If I get a shell
    session to the mail server and look in the user's
    'Sent' folder, all the 435 messages are there in the
    filesystem.
    From perusing the archives of this forum, it looks
    like I need to run 'reconstruct' for this user's
    account (or their 'Sent' folder) to fix this problem.
    I downloaded the Admin Guide and looked at the doco
    for the 'reconstruct' command, but it's a bit vague
    to me... So...
    Should I run 'reconstruct' to fix this problem?
    If so, what syntax should I use to just 'reconstruct'
    this user's 'Sent' folder?
    What would the syntax be to 'reconstruct' all folders
    for this user?
    I see that if I don't use the right arguments to
    'reconstruct', it will reconstruct all accounts on
    the server, which I definitely don't want 8-)
    Thanks in advance,
    Guido.

  • View table and Master table don't match

    I am setting up Materialize view replication between two systems connected over a WAN. The number of rows in the master table does not match the number of rows in the Table at the view site. Is there a way I can monitor/watch or otherwise see what replicated transaction are being applied to the view. I know that rows are added to and deleted from this table over the course the the day.

    If the master table is always changing, the two tables will never match completely. Take the following scenario:
    time 0: Insert row A in master table
    time 1: Begin refresh of remote MV
    time 2: Insert row B in master table
    time 3: End refresh of remote MV
    At this point, the master table will have two rows (A & B) while the remote table only has row A. If there is a materialized view log on the master table, row B will be present in the log and will replicate on the next refresh. I'm not aware of any utility that lets you view the data in the materialized view log in a particularly human-readable form, however-- that data is stored in a RAW column.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Icloud id and apple id don't match.

    Like a ******* I changed my apple id and it's now different from my icloud id and I can't sign in and I can't figure out how to change it to match my new apple id. HELP!

    Did you change your Apple ID on your exisitng Apple account, or did you create a brand new Apple ID?
    If you simpley changed the Apple ID on your exisitng Apple account then you need to do the following to remove the old iCloud account from your device:
    1.     Go to Manage your Apple ID and sign on with your current Apple ID and password. Edit your Apple ID and change it back to the old ID (this is temporary. Do NOT verify it, do NOT change the password): Apple - My Apple ID
    2.     Go to Settings>iCloud on your device, scroll to the bottom an click on Delete Account. When asked for a password, type in your current Apple ID password. Follow the prompts to complete the deletion of the account
    3.     Go back to Manage your Apple ID, and change your Apple ID back to your new ID
    4.     Go back to Settings>iCloud and sign on with the new Apple ID
    Cheers,
    GB

  • Hardware clock and system clock don't match

    hello. i recently upgraded to kde 4.7, and i don't know if it's the culprit or not, but my system clock is now ahead of the hardware clock by the timezone offset.
    my timezone is Asia/Manila, which is UTC+8. so if the correct time is 00:00, the system time is 08:00.
    i dual boot with windows so the HARDWARECLOCK setting in /etc/rc.conf is set to localtime.
    interestingly, the commands "hwclock --show" and "date" both show PHT as the timezone, but with the aforementioned time skew. to illustrate:
    # hwclock --show
    Fri 05 Aug 2011 10:45:02 AM PHT -0.500309 seconds
    # date
    Fri Aug 5 18:45:02 PHT 2011
    running "hwclock --hctosys" fixes the problem while logged in, but restarting the computer reverts the problem. i could put a daemon that runs the command at startup, but i never needed to do that before and i'm not inclined to at the moment. i think this is just a misconfiguration somewhere.
    thanks for any help you could give.

    hello. it is
    hwclock from util-linux 2.19.1
    Using /dev interface to clock.
    Last drift adjustment done at 1312511647 seconds after 1969
    Last calibration done at 1304274137 seconds after 1969
    Hardware clock is on local time
    Assuming hardware clock is kept in local time.
    Waiting for clock tick...
    ...got clock tick
    Time read from Hardware Clock: 2011/08/05 12:08:46
    Hw clock time : 2011/08/05 12:08:46 = 1312517326 seconds since 1969
    Fri 05 Aug 2011 12:08:46 PM PHT -0.690104 seconds

Maybe you are looking for