[SOLVED] Font size issue since recent update

I swear I'm going insane.
Since the last round of upgrades (including a kernel update, an nvidia driver update and xorg 1.8) my fonts seem larger and programs which start up windowed (e.g. sakura) are taking up more screen space than before.
xrandr correctly returns my screen resolution (1440x900). Following the instructions for checking if xorg has correctly detected DPI, it seems everything is in order. All I had to do to get things more or less back to normal was to set my fonts to be a size lower (in obconf and lxappearance) - but at size 7 for everything now where before I was on 9.
Please tell me I'm going nuts and imagining things, or alternatively if you have any suggestions for what might have happened.
Thanks.
Last edited by epimer (2010-06-27 14:56:53)

I agree with brebs, especially since setting my screen to the correct DPI recently involved changing to font size 7 to make things look right again
you could check Xorg.0.log.old maybe to see what was being set for dpi, or if you really wanted to, you could downgrade and see what xorg sets

Similar Messages

  • Since recent updates, I have noticed that my apps close automatically when I am distracted. In some cases it is time consuming to sign back in and get back to the task I was doing. Is it possible to change a setting so the apps will stay open?

    Since recent updates of iOS, I have noticed when using my iPad that my apps close automatically when I have to leave the room or am otherwise distracted for a few minutes. It is sometimes time consuming to sign back in and get back to the task where i left off. Is there a setting I can change so it will keep the apps open until I am ready to close them? Thanks for your help.

    Did you have this problem before Restoring you iPad?
    If you did then did you restore with a backup. You may have reinstalled something that is conflicting in this back up
    If not then sounds like either something went array with the clean install or a hardware issue.
    I know it's long winded but have you tired a clean install then downloading the apps again?
    PJRS

  • P6N Diamond New Problem: Second HDD Randomly Starts/Stops Since recent Update

    Howdy All,
    Continuing problems with the P5N Diamond.
    This one's new.
    Previously I had the same problem as many others with the cold boot issue. Somehow, someway, it just stopped: cold boot or not, one day it just started booting fine....go figure.
    However, I recently (about 3 weeks ago) did the MSI live update that included something or other pertaining to the E-SATA....support for it or something to that end. Although I don't use the E-SATA, I installed it thinking I might at some point and since installing it, I have discovered a new problem: my second drives (in RAID 0) just opens/closes randomly. It seems to mostly occur when operating demanding programs: gaming, watching a video, that sort of thing.
    Everytime it does this, it takes me to desktop and asks me what program I want to use to open the program......which when I do, is nothing more than my second (D drive) HDDs in RAID 0. I then get the yellow pop up message in the bottom toolbar from Windows saying it's experienced a write failure problem. It hasn't done any damage that I can tell and I've lost nothing, but being taken to desktop perpetually is a major issue. This problem is driving me absolutely up the wall. No sooner than I start to do something and wham.....I'm at desktop being asked what program I want to use to open up the second HDDs. I've also tried just leaving it open but to no avail: it just randomly continues to open and close.
    I have my O/S on the C drive and 2 more HDDs in RAID O for back up on ports 6 & 7. Since doing the MSI update that included the E-SATA whatever, this new problem almost prevents the computer from being usable: certainly nothing in gaming is possible along with anything that requires uninterruption.
    Here's my system:
    M/B: P6N Diamond
    CPU: E6850
    RAM: Corsair XMS PC-8500, 2 x 1 gig
    HDD: 1- WD 150 Raptor
    HDD: 2- WD 5000AAKS in Raid 0
    Vid Card: EVGA 8800GTX
    PSU: PC Power & Cooling 750 Silencer
    ODD: Sony DRU 830A
    FDD: Sony Floppy
    Misc: Scythe fans x 5
    O/S: XP Pro w/ SP2
    Running BIOS 1.2
    So, being fairly certain the MSI update created the problem, my question is, how do I undo the MSI's most recent update to remove it? When I go into Add/Remove Programs, nothing is listed there. I'm not sure this is the source of the problem but I do know I didn't have it beforehand.
    I'd greatly appreciate any help with this....even any ideas. While I have some computer knowledge, I'm not as tech savvy as most here, but this problem is, apart from driving me up a wall, making the computer almost unusable. FYI, I haven't done a System Restore because I've installed several things since and don't want to lose them if I can isolate the problem, but I will if that's what you all recommend.
    Again, sorry for what may be a noobish question, but I'm not sure where else to go. After dealing with MSI's tech support, I'd rather talk to a wall.
    Thanks greatly.
    Pepper1

    Mark,
    Forgive me for asking, but I am a bit confused. Is your "cold boot issue" now solved? If so, do you think that the new drives are the key?
    Lev
    Quote from: MarkJohnson on 17-December-07, 14:21:23
    Sorry for late post.
    After setting up the HW RAID (2500YS) for booting the system still cold boots.  strangely this time the reset (Ctrl+Alt+Del) doesn't seem to work.  I must of did it two dozen times and it would never clear.  I then just powered off after the other 2 drives on the nvidia SATA cleared and seen the HD LED light up and stay on for a few seconds(seems stuck on the 4723 checks of the drive) and then powered down and powered right back up with no cold boot issue.  It has worked this way every time for the last week or so and I tested it like 20 or so times(3-4 times a day).  These drives are listed as being compatible after the firmware update (and I did that already) so I guess it is either the MB BIOS needs updating or it's the way the nvidia chipset runs this setup is wacky.  This is assuming the 4723 HD compatibility list is correct.
    here's a summary of the drives so far.
    36GB Raptors (old revision) - can take forever to boot properly and corrupted my disk in 3 days of testing (scrambled my directory structure)
    105GB Raptors - Just reset(Ctrl+Alt+Del) 1-4 times after the HD LED goes solid for a few seconds.  worked for two months no errors.
    250GB Caviar RE(2500YS) - have to power off (power button) when HD LED goes solid.  so far no problems for a week.
    80 GB SATA II Hitachi Deskstar (HDS728080PLA380 - May 2005) - same as 150 GB Raptors, just a reset or four, only did a days worth of testing with no errors.
    well, I was hoping for those 2500YS to work properly.  Now it makes it really hard to track the problems with so many different errors and 3 different places it can go wrong 4723/nvidia/msi/HD Manufacturer.  wait, that's 4.  Oh boy!
    Hopefully this gets resolved soon.  I've already had to move this MB to my secondary system, and for other reasons than this.  I didn't mind hitting the reset button to get this to run.  I get the feeling that MSI has abandoned this board on us.  with the new P7N being released it will be even harder to get anyone to mess with this thing.
    -=Mark=-

  • Will Adobe ever fix the UI text font size issues in CS6 apps?

    Having recently installed CS6 on my new Windows computer, I find some serious issues with font sizes in the user interface (and not only in Dreamweaver, but in several--but not all--the applicaitons). You'd think that with a 27-inch screen, font sizes wouldn't be a problem. And you'd be wrong.
    The irony is that some text is properly sized. Commands in the menus. For example. But the menu names are not. The text of items in the File tab is correctly sized, but the name of the File tab is not. In the Manage Sites dialog box, the title bar text is properly sized, but the text within, including button labels, is not. IN almost all of these cases, text is just plain way too small to read. It looks like the programmers made a HUGE boo-boo: they sized text in pixels, not only a no-no in web diesgn, but a no-no in applicaiton design.
    Because on a 27-inch screen with a resolution of 1920x1080, UI text in Dreamweaver is all plenty large and readable, while on a 27-inch screen with a resolution of 2560x1440, UI text all over the applicaiton is too tiny to read--and made worse by putting the text on a gray background, reducing contrast, yet another design no-no.
    CC is NOT an option--and properly should not be for any occasional user. Do not even think of suggesting it as a "solution."
    This is clearly a bug (did Adobe do any testing on higher-resolution screens before releaseing CS6?), and one I wonder if it is unique to Windows systems (as Apple has had similarly high-resolutiopn screen for its displays and iMac lines for quite some time now). Or is it uniquely a Windows 8 issue?
    Finally, is there at all a workaround? I can find nothing in the Settings dialog box that would control the size of UI text. Perhaps there is a text-based configuration file that could be modified to change the size of UI text. (Yeah, having configured autoexec.bat, config.sys, win.ini, and similar files back in the day, I do know my way around configuration files--if they are still used.)

    twritersf wrote:
    Having recently installed CS6 on my new Windows computer, I find some serious issues with font sizes in the user interface (and not only in Dreamweaver, but in several--but not all--the applicaitons). You'd think that with a 27-inch screen, font sizes wouldn't be a problem. And you'd be wrong.
    (and not only in Dreamweaver, but in several--but not all--the applicaitons).
    What made you think that you should complain to Adobe about Windows display problem?  Adobe and Microsoft are two different companies competing against each other.
    However, you might have display problem and the best way to resolve this is by going to:
    Control Panel >> Display
    Follow the online instructions.
    Please not, you go to control Panel from within the windows itself NOT from DW.
    Hope this gets you started or you can ask in the Windows Forum on Microsoft Website.

  • Issue since iOS Update with TomTom Carkit

    Hardware:
    iPhone 4, iOS latest Patchlevel
    TomTom Navigation CarKit with integrated Speaker, GPS and Bluetooth connection
    I have got the following issue since the iOS Update to 6.x
    integrated CarKit Speaker is no longer in use=> After receiving an Email with notification signal the speaker becomes active => Makes the usage of a Navigation Software a little more complicated without spoken notifications
    Continuos Bluetooth Connection loss to the dock, sometimes followed by the message: Charging with this device is not supported! Could only be solved with undocking/docking the iPhone => complicated during driving on a motorway!
    Some apps are no longer able to start (mostly games for my kids).
    Has anyone an idea?

    Have you contacted Honda? Is there a firmware update for the car system?
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.
    Sometimes an iOS updates breaks compatibility and y have to air for a firmware update to the car system or iOS update

  • Asset Generator broken since recent update to Photoshop CC

    With this latest update to Photoshop CC, the asset generator no longer seems to support having masks on a folder - asset will NOT generate if this is the case. Seems the only work-around is to clip everything down to a shape layer, which is highly awkward. Is this a bug? Can it please be fixed? This used to work just fine and has only been broken since the most recent update.

    My team is having the same issue.  I'd love to hear about a fix to this.

  • Major phone issues since last update

    My Droid Charge downloaded the last software update and ever since it started bugging out. I called Verizon and they sent me a replacement, which bugged out worse than the first one. I went to call Verizon but the phone was acting up so bad that it froze to the point where I would do a battery pull and it still didn't work. I had to walk to the Verizon store because my phone wouldn't make calls or text for over 7 hours. They ordered me a third phone which has the same problems. All new SIM cards every time and everything. These are just some of the issues I've been having across all three phones. PLEASE HELP!
    1) When entering text (text message, email, etc.), the T9 will give me suggestions, but there is no text being entered into the text box and I have to restart the phone for it to work again.
    2) The phone force closes applications that I haven't even opened. I will restart the phone or do a battery pull and as soon as I unlock the phone, I am greeted by at least two apps that have been force closed. (I put the phone in Safe Mode to see if it helps. It actually force closed applications more frequently)
    3) I will try to unlock the phone and the screen will lock up and will need a battery pull to fix it.
    4) If I stay in the same place and only wake the phone up from sleep mode without actually running any applications, the phone will go from 4G to 3G to not even being connected, all within about an hour.
    5) Since the update, I have had HUGE data usage spikes in my bill. I went from an average of 2 gigs a month to 9 gigs of data the month after the update and 7.5 the month after.
    6) I will go into my contacts to make a call and when I click on the number of the contact I would like to call, the phone is unresponsive and doesn't call.
    7) The phone will randomly log me out of my email accounts and I miss important emails for work. This only recently started happening.
    8) The phone alerts me of several missed calls without ever actually ringing. (I know I just didn't hear it because the phone is usually on the desk in front of me and I'll wake it up to check the time and next thing I know, I have 6 missed calls)
    9) If the phone actually does start ringing from an incoming phone call, when I go to answer the call, the phone freezes a lot and won't actually answer the call, but it continues ringing.

    Since the posting, I received a third replacement for my phone. So far it is the best working phone out of all of them. It occasionally freezes up and I have to do a battery pull to get it stable again. I'm just quite unhappy because I didn't really even want the phone to begin with. Verizon called me and said they wanted to give me the early upgrade last year so I was like fine, but it has been a nightmare. Then I am approved for an early upgrade by two different managers from call centers and am told that they need to call me back to do the order, but I never get called back. When I call back, I get diverted and the new person on the phone ends up just wanting to send me a replacement Droid Charge. Then I finally get someone who will give me the upgrade, but then am surprised to find out that by upgrading, I will no longer be able to keep my current contract.
    I have been a Verizon customer for one hell of a long time and have never had an issue until this past month, and am exhausted from having to make so many calls to Verizon. If nothing is resolved with my account by the end of my contract period, I am going to someone else.

  • Games keep crashing since recent updates

    Hey there,
    I've had no problems before with playing games (mostly via Steam), however, since recent OS X updates I'm lucky if I can get more than 2 minutes of game time in before the game decides to freeze or crash.
    Here's my EtreCheck report - any ideas how to fix it?
    EtreCheck version: 2.1.8 (121)
    Report generated 7 April 2015 23:15:13 BST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Late 2012) (Technical Specifications)
        iMac - model: iMac13,2
        1 2.9 GHz Intel Core i5 CPU: 4-core
        32 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1600 MHz ok
            BANK 0/DIMM1
                8 GB DDR3 1600 MHz ok
            BANK 1/DIMM1
                8 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce GTX 660M - VRAM: 512 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 3 days 2:23:21
    Disk Information: ℹ️
        APPLE HDD ST1000DM003 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (207.83 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Hewlett-Packard HP USB Mass Storage Device
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.mice.driver.Wireless360Controller (1.0.0d14 - SDK 10.9) [Click for support]
        [not loaded]    com.mice.driver.WirelessGamingReceiver (1.0.0d14 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.mice.driver.Xbox360Controller (1.0.0d14 - SDK 10.9) [Click for support]
        [loaded]    com.nvidia.CUDA (1.1.0) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.nvidia.CUDASoftwareUpdate.plist [Click for support]
        [running]    com.rosettastone.rosettastonedaemon.plist [Click for support]
        [running]    com.trusteer.rapport.rapportd.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.ea.origin.ESHelper.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.mice.360Daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [not loaded]    com.nvidia.cuda.launcher.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.akamai.single-user-client.plist [Click for support]
        [running]    com.amazon.music.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Origin    Application  (/Applications/Origin.app)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
        BetterSnapTool    Application  (/Applications/BetterSnapTool.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Unity Web Player: Version: UnityPlayer version 4.3.4f1 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        PepperFlashPlayer: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
        CUDA Preferences  [Click for support]
        Flash Player  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
        XBox 360 Controllers  [Click for support]
    Time Machine: ℹ️
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 791.52 GB
        Destinations:
            Data [Network]
            Total size: 2.00 TB
            Total number of backups: 63
            Oldest backup: 2014-06-23 07:52:14 +0000
            Last backup: 2015-04-07 21:49:08 +0000
            Size of backup disk: Too small
                Backup size 2.00 TB < (Disk used 791.52 GB X 3)
    Top Processes by CPU: ℹ️
            16%    mds
             3%    WindowServer
             0%    fontd
             0%    systemstatsd
             0%    Google Chrome
    Top Processes by Memory: ℹ️
        790 MB    com.apple.WebKit.WebContent
        481 MB    softwareupdated
        447 MB    Mail
        378 MB    mds_stores
        206 MB    Google Chrome
    Virtual Memory Information: ℹ️
        20.36 GB    Free RAM
        10.67 GB    Active RAM
        1.11 GB    Inactive RAM
        2.21 GB    Wired RAM
        44.56 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Apr 7, 2015, 10:41:48 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/dreadout_2015-04-07-224148_[re dacted].crash
        Apr 7, 2015, 10:16:52 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Total War SHOGUN 2_2015-04-07-221652_[redacted].crash
        Apr 7, 2015, 10:13:51 PM    /Library/Logs/DiagnosticReports/Total War SHOGUN 2_2015-04-07-221351_[redacted].cpu_resource.diag [Click for details]
        Apr 7, 2015, 10:07:03 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/dreadout_2015-04-07-220703_[re dacted].crash
        Apr 7, 2015, 09:59:11 PM    /Library/Logs/DiagnosticReports/dreadout_2015-04-07-215911_[redacted].hang
        Apr 7, 2015, 09:52:10 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/dreadout_2015-04-07-215210_[re dacted].crash
        Apr 7, 2015, 09:50:02 PM    /Library/Logs/DiagnosticReports/dreadout_2015-04-07-215002_[redacted].hang
        Apr 6, 2015, 07:09:39 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-06-190939_[redacted].crash
        Apr 6, 2015, 07:03:58 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-06-190358_[redacted].crash

    Time since boot: 3 days 2:23:21
    I'd reboot to clear out some temp and cache files.
    Have you checked with the game developers to see if you've got the latest version that is compatible with Yosemite?

  • Lots of problems since recent updates

    Since the most recent updates for Mavericks and iTunes, I am having a host of problems with iTunes, and am losing my patience.  If anyone can help, I would certainly appreciate it.
    I have a rather large library, stored on an external drive, which I have not had problems with in the past, and this same drive holds files other than iTunes related items.  iTunes has 'lost' my library twice recently, forcing me to go through great lengths to get it restored, including spending the past several days literally adding everything back into it.  This morning, it did it again. After restarting my computer, iTunes, once again, came up with the message that it cannot find my library, in the very place it has been, and where it was accessing it 2 minutes earlier.  The itunes library files are still there, nothing has changed, and this is now the third time it's done this since updating.
    I have followed all of the recommended steps to restore the library, none of which has worked properly.
    Right before restarting the computer, while I was finishing up Re-importing the last of my movies, iTunes stopped importing them.  No error message, just I would drag and drop the files (these are the same movies I've had in my library and have been watching, some for years), and I got no response. Then, I tried 'Import to Library' rather than dragging, and got the same.  So, I closed out, and restarted, leading me to yet another lost library.  To start from scratch, to give you an idea, I have 500+ gigs of music, and several hundred movies/tv shows.  I am not happy thinking that I will have to do that again.
    When iTunes opens, and gives me the message that it cannot find its own library, I choose to select a library and send it back to the same spot I've been using.  The library files are all still there, and yet iTunes claims not to see them, telling me there is no library file in this location.  I am incredibly fristrated right now.
    Please help?

    Verizon Wireless Customer Support wrote:
        I truly understand your viewpoint MySIII. Software is definitely suppose to enhance your phone and not hinder it. Your right, our customers should not have to worry each time an update is released. I'm sorry you are having so many issues with your phone. Our suggestion to uninstall and remove apps is just to give the new update a chance to make your phone better. This works the same for apps and functionalities that were not put on your phone when released. Now that your phone is working differently other functionalities have an opportunity to work or become better. We also suggest a factory reset after large updates. Please ensure your phone information and contacts are backed up. Here are the steps http://tiny.cc/7unvuw . Please let me know if the above information helps.
    KinquanaH_VZW
    All I hear is Blah blah blah..First of all, I am not gonna do a factory reset, (and I know all about backing up everything).  And so now you are saying that every time we get an update, we have to factory reset or uninstall all of our app and reinstall??  That is utterly ridiculous...
    This Issue is NOT an app issues or a factory reset issue. Are you no reading me , or any other threads or posts about this?   The update was a keyboard and camera update, so take you VZW clout and let the people that need to know, that this update sucks and they need to FIX IT...Period. No factory resets, no app uninstall and reinstalls..This is a Samsung keyboard issue (and for some reason battery draining)  The Samsung stock keyboard is not app related.  .None of those suggestions work.. OK.  Just fix the update.  So no, the above info does not help. Thanks tho.

  • Issues since itunes update 11.0.2.26

    Ipod nano 6th generation. No previous issues. I updated itunes on my PC to 11.0.2.26 recently and when I opened it the first time all of my music was gone. It asked to do a scan and import and I agreed. My music came back (at least I hope they are all there) but my playlists are gone (they are still on my nano though). I recently bought some new music and went to sync my ipod with my computer. I connects fine, it comes up in itunes as being connected, I can look at the music on it, but it isn't actually syncing. The new music I purchased is not showing up on the nano after the nano screen claims to have synced. (Interestingly it only does this screen right after I plug it into the usb, not if I manuallly tell it to sync on the pc, which apparently does nothing). I have reset, restarted, tried different cords, and alternated usb outlets, etc. Ran diagnostics and all device connectivity tests pass and it says ipod connected, but in the next screen when I try to run the device sync tests it tells me no ipod found. This all started with the new update...

    Try just downloading and installing from the Support site - http://support.apple.com/kb/DL1614 - instead of the Mac App Store.
    Clinton

  • Cannot print a web page since recent update to Apple Snow Leopard

    After recent update to Mac OS 10.6.4 I cannot print any page when using Firefox. I tried using Apple Safari and there was no problem
    == This happened ==
    Every time Firefox opened
    == After recent update to Mac OS 10.6.4

    This is a Firefox printing issue that I just fixed for my 85 year old Mom (birthday present). Other people have the same problem so I'm posting the solution:
    Go to address bar in Firefox--
    Type in this:
    about:config'''
    Click I AGREE on the warning
    Find -- '''print.macosx.pagesetup-2'''
    '''RIGHT CLICK on your mouse'''
    and go to '''RESET'''

  • CR XI R2 pdf export font size issue

    Exporting a report to PDF using Crystal XI R2 seems to be reducing the size of the fonts. When printing directly from CR and exporting to PDF and printing from the PDF viewer the font sizes are smaller. Any ideas on what I can do to correct the problem?

    Please refer following SAP note:
    Business Objects Notes Get Help | Close 
       1220516 - Font size decreases when report is exported to PDF from Crystal Reports XI or Crystal Reports XI Release 2 
    Language   English     Version   1     Validity: 07.05.2008 - active   
    Edit Print View Show change log Show Internal Memos 
    Content:    Summary   |   Header Data   |   Other Properties
    Symptom
    In Crystal Reports XI and Crystal Reports XI Release 2 the font shrinks by approximately 10% when a report is exported to Adobe Acrobat Format (PDF).
    Cause
    This behavior is due to the way Windows and UNIX, and therefore Crystal Reports, handles low point size fonts on a low-resolution screen. Text layout in the absence of a printer driver will consistently be rendered differently than in PDF.
    Crystal Reports currently shrinks the font by 10% to prevent any truncation this difference may cause.
    Resolution
    CAUTION The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
    To resolve the behavior
    Set the resolution of the default printer of the local computer experiencing the issue to 1200 DPI. Most printers have a default setting of 600 DPI.
    Create two registry keys to prevent the crxf_pdf.dll from decreasing in font size.
    Click Start > Run. Type "regedit". The Registry Editor appears.
    Create the following keys for Crystal Reports XI with the defined values:
    HKEY_CURRENT_USER\Software\Business Objects\Suite 11.0\Crystal Reports\Export\PDF\ForceLargerFonts
    Type: DWORD
    Recognized Values: 0,1
    Default Value: 1
    Creation Method: manual
    HKEY_LOCAL_MACHINE\Software\Business Objects\Suite 11.0\Crystal Reports\Export\PDF\ForceLargerFonts
    Type: DWORD
    Recognized Values: 0,1
    Default Value: 1
    Creation Method: manual
    Set both registry key values to 1 to turn them on.
    Create the following keys for Crystal Reports XI Release 2 with the defined values:
    HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Export\PDF\ForceLargerFonts
    Type: DWORD
    Recognized Values: 0,1
    Default Value: 1
    Creation Method: manual
    HKEY_LOCAL_MACHINE\Software\Business Objects\Suite 11.5\Crystal eports\Export\PDF\ForceLargerFonts
    Type: DWORD
    Recognized Values: 0,1
    Default Value: 1
    Creation Method: manual
    Set both registry key values to 1 to turn them on.
    In UNIX, an X server client such as x-win32 must be installed. Add the keys as follows:
    Launch the X server client.
    Source <bobje install>/bobje/setup using env.sh (for example: ./env.sh).
    Create the registry keys as detailed above.
    Restart the Report Page and Cache Servers.
    ====================
    NOTES:
    If using Windows 2003 Server, upgrade to Acrobat Reader version 8.0 or higher as well as creating the above registry keys.
    Use the appropriate path to access the UNIX regedit as follows:
    AIX: <bobje install>/bobje/enterprise115/aix_rs6000/crpe/mw/bin-aix4_optimized/regedit
    Sun Solaris: <bobje install>/bobje/enterprise115/solaris_sparc/crpe/mw/bin-sunos5_optimized/regedit
    Linux: <bobje install>/bobje/enterprise115/solaris_sparc/crpe/mw/bin-linux_optimized/regedit
    ====================
    Edited by: Prathamesh Acharya on Apr 23, 2009 5:50 PM

  • Font size issue with the email functionality of infopath form

    Hi,
    We have a SharePoint list created and customised the form to send the form via email using email functionality in infopath form.
    We have made the font size of the form fields( rich text box) to 11. But it is showing as 10 in email. Also for a text box we set the font size to 14. But it is 13.5 in the email.
    Could anyone please let me know how to fix this issue?

    http://social.technet.microsoft.com/Forums/sharepoint/en-US/afbd9fc3-b8d3-4ef9-a8bf-9cb136d12039/formatting-problem-with-email-from-an-browser-enabled-infopath-2010-form-in-sharepoint-2010?forum=sharepointcustomizationprevious
    Yes, this is normal. Forms Services has to convert the form to an aspx page, and things get lost in translation when this gets submitted via email.  My workaround has always been to set static widths to columns/controls, but you said that didn't work
    for you?  It's always worked for me.
    https://go4answers.webhost4life.com/Example/infopath-send-form-email-162481.aspx
    http://www.formotus.com/15413/blog-infopath/making-the-most-of-email-submit-with-infopath-and-formotus-forms

  • Dynamic text boxes, font size issues

    I have created a dynamic text box and an input text box.
    I have produced code that replicates whatever is typed in the
    input box to display in the dynamic box along with a date and time
    stamp once a button is clicked.
    This all works fine, except for the sizes of the fonts. for
    both boxes, i selected font size 10 . The input box is fine,
    however the dynamic box text is huge.
    When i make the dynamic text font smaller, it fits in fine,
    but the input text that is inserted into the dynamic text box comes
    in too big. If i make the input text box font smaller it is
    unreadable when typing it in.
    any soultion to how to make my font consistent. I am assumin
    the problem is because both the text boxes are different sizes,
    however i don't know how to resolve the issue.
    Any help is much appreciated.

    var today_date:Date = new Date();
    var date_str:String =
    (today_date.getDate()+"/"+(today_date.getMonth()+1)+"/"+today_date.getFullYear());
    var my_date:Date = new Date();
    var boat = ""
    btn_send.onPress = function() {
    var today_date:Date = new Date();
    var date_str:String =
    (today_date.getDate()+"/"+(today_date.getMonth()+1)+"/"+today_date.getFullYear());
    var my_date:Date = new Date();
    date_txt = date_str + " " + my_date.getHours() + ":" +
    my_date.getMinutes() + ":" + my_date.getSeconds() + " " + boat;
    the text appears in the dynamic box it just is a mish mash of
    font sizes!!!

  • Font size issue in caption name of screen in syclo

    Hi,
    I am working on a syclo agentry project.
    We have many screens in my application and we are using Motorola ET1 device with android version 4.1.1.
    The issue is that when we are keeping the deivce in landscape view the caption name of the screen is getting half cropped from bottom.
    For reference i have put one screenshot below.
    Also it is coming just fine in portrait view.
    Is there any way that the font size can be minimized or some configuration change in application so that this issue can be resolved.
    Thanks,
    Star
    Tags edited by: Michael Appleby

    I tested on a device here and see the same issue using 6.0.40.1.  I would consider this a bug and open an issue with support so they can escalate and have it corrected.  It appears to be device/os version specific as I don't see the issue on Android 2.3.4 but I do see it on Android 4.1.1 and Android 4.4.2.
    I am also going to open an issue with Engineering on this as well.
    --Bill

Maybe you are looking for