[Solved] Get a segmentation fault message when try to run a Fullrecall

I'm running on Arch x86_64.
Then install this package with the packer.
https://aur.archlinux.org/packages/fullrecall/
run it with the terminal and get a segmentation fault message.
I have tried to install some lib32-* but still no luck.
http://sophie.zarb.org/distrib/Mageia/2 … 2f35d/deps
Any ideas ?
Otherwise, I will run it on Wine instead.
Last edited by fieldfirst (2013-03-25 07:16:53)

The fullrecall package is unmaintained, poorly written, and out of date (the latest version on the fullrecall website is 1.5.2).  It's really hard to say why it is segfaulting but I would bet that it is because fullrecall is distributed as a binary rather than as source files.  This means that it links against very specific versions of its dependencies, none of which are listed in the PKGBUILD.  It's very possible that the versions in the arch repos of the various lib32-* dependencies that you installed are newer versions than the binary program requires.
You could try running namcap[1] on the built package and look for the specific version of the dependency you need in the Arch Rollback Machine[2], but I'm not sure how much that will help you.  If you do manage to get it working, please adopt and update the package in the AUR.
[1]https://www.archlinux.org/packages/extra/any/namcap/
[2]http://arm.konnichi.com/
Last edited by jynnantonix (2013-03-24 18:32:00)

Similar Messages

  • Error message when try to run copied java program

    Hi Java Guru,
    Can somebody help me with this issue ?
    I was copy my java source from java_ulangan2 to java_ulangan20, when i tried to run the java program, i get an error message.
    Below is the error message:
    05/01/2010 1:02:42 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [003]Deployment aborted
    Settings
    SDM host : wfmdev
    SDM port : 50018
    URL to deploy : file:/d:/DOCUME1/GunawanJ/LOCALS1/Temp/temp7843042886291622098Java_ulangan20.ear
    Result
    => deployment aborted : file:/d:/DOCUME1/GunawanJ/LOCALS1/Temp/temp7843042886291622098Java_ulangan20.ear
    Aborted: development component 'Java_ulangan20'/'local'/'LOKAL'/'0.2010.01.05.13.02.32'/'0':Caught exception during application deployment from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Cannot deploy application local/Java_ulangan20.. Reason: Clusterwide exception: Failed to deploy application local/Java_ulangan20. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:      com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/Java_ulangan20. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine? (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted
    I really appreciate any kind of help.
    Thanks,
    JGN

    Hi John.
    In past i have faced same problem for the same task. Take help of the Basis team provide tham .ear file name and ask then to un-deploy the file from the server cluster.
    After this deploy your application again.
    Hope this may help you.....:)
    Deepak!!!

  • I keep getting a filter fail message when i try to print

    i cannot print, i have a new mac and i need help, can someone help me out?

    Hi @pkjbadala ,
    I see that you are getting a filter failed message, when you try to print. I will certainly do my best to help you.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    Try and print a document.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • I have iTunes open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice.

    I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.

    Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
    Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
    Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again.

  • I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU   TI/-Tmp-/iPhoto/DSCF2033.JPG".  Have already tried removing and reinstalling iPhoto to no avail.

    I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU   TI/-Tmp-/iPhoto/DSCF2033.JPG".  Have already tried removing and reinstalling iPhoto to no avail.

    Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
    If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected?

  • I am getting an "error -5000" message when I try to backup my iphone 4 to itunes.  Any ideas what this means?

    i am getting an "error -5000" message when I try to backup my iphone 4 to itunes.  Any ideas what this means?

    Take a look at this link, http://support.apple.com/kb/ts1424

  • HT201210 I get the follow error message when i try to update my Iphone on I Tunes "Could not update file because firmware file is not compatible

    I get the follow error message when i try to update my Iphone on I Tunes " fireware is not capatible 2

    got an anti virus that thinks it should scan email. Turn that function off.
    Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails.

  • I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

    Hi,
    I’m getting the following error message when ever I try to start cs6 and the program gets close.
    “Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
    Please advise what is the problem? and How to sort this out?
    OS Name
    Microsoft Windows 8.1 Pro
    Version
    6.3.9600 Build 9600
    Other OS Description
    Not Available
    OS Manufacturer
    Microsoft Corporation
    System Name
    JARVIS
    System Manufacturer
    Dell Inc.
    System Model
    Inspiron N5110
    System Type
    x64-based PC
    System SKU
    To be filled by O.E.M.
    Processor
    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date
    Dell Inc. A11, 8/3/2012
    SMBIOS Version
    2.6
    Embedded Controller Version
    1.01
    BIOS Mode
    Legacy
    BaseBoard Manufacturer
    Dell Inc.
    BaseBoard Model
    Not Available
    BaseBoard Name
    Base Board
    Platform Role
    Mobile
    Secure Boot State
    Unsupported
    PCR7 Configuration
    Binding Not Possible
    Windows Directory
    C:\Windows
    System Directory
    C:\Windows\system32
    Boot Device
    \Device\HarddiskVolume2
    Locale
    United States
    Hardware Abstraction Layer
    Version = "6.3.9600.17196"
    User Name
    Jarvis\JARVIS\Abhishek
    Time Zone
    India Standard Time
    Installed Physical Memory (RAM)
    4.00 GB
    Total Physical Memory
    3.16 GB
    Available Physical Memory
    1.21 GB
    Total Virtual Memory
    3.72 GB
    Available Virtual Memory
    1.55 GB
    Page File Space
    576 MB
    Page File
    C:\pagefile.sys
    Hyper-V - VM Monitor Mode Extensions
    Yes
    Hyper-V - Second Level Address Translation Extensions
    Yes
    Hyper-V - Virtualization Enabled in Firmware
    Yes
    Hyper-V - Data Execution Protection
    Yes
    Display adapters:
      and NVIDIA GeForce GT 525M.

    Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
    Mylenium

  • I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error.

    I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error. (-50). my icloud drive was stuck in an upgrade cycle, but i've stopped that and still get the error message.

    I restarted itunes and tried again (based on a similar question/solution from 2012).
    I don't get the error message anymore, but it's really sort of odd that after step one of sync, it looks as if sync stopped, and then all of a sudden you see step 4 of sync.
    Also before the upgrade I had 7+ gigs of space free and after the upgrade I have 10 gigs free. seems like something is amiss, but it's not like I have anyway of determining that.

  • A get an internal error message when i try to install adobe reader

    I get an internal error message when I try to install Adobe reader.  I also get error message 1606 could not access net location %APPDATA%\.  How can I fix this?

    See this article http://support.microsoft.com/kb/886549/ regarding the corrupted %APPDATA% environment variable.
    If you require further help, please specify your Windows version.

  • I get a download error message when I try to open my apps tab on my home network

    I get a download error message when I try to open my apps tab on my home network. But I am able to sign in to my account on the web. Do you know how to fix this?

    This is an open forum, not Adobe support... you need Adobe support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wron

    I have tried to add a hotmail account to Thunderbird because my Internet provider will stop e-mail support in the near future. I was able to add a hotmail account to Thunderbird, but I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wrong?" (The hotmail website receives the e-mail.) User name and password is certainly correct. I have a 8.1 OS. Thank you.

    got an anti virus that thinks it should scan email. Turn that function off.
    Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails.

  • I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

    I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

    OK, I tried a few things, and I do not understand the results.
    1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
    2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
    3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
    4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
    My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

  • Very often I get a contact error message when I try to use my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol.

    Very often I get a contact error message when I try to us my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol..

    See this support article - https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

Maybe you are looking for