[SOLVED] Hibernation fails

Hello
I have a laptop with Arch (Kernel 3.12.9-2) and KDE, and some problems with hibernation. After installation was working, using a swapfile, but i noticed it was too small, so I made a bigger one, and then it stopped working.
fstab entry seems ok, I have resume hook in mkinitcpio.conf and resume options in GRUB.
System log shows that PM can't find a swap area, both if I hibernate from KDE and terminal
feb 04 16:45:00 giulio kernel: PM: Cannot find swap device, try swapon -a.
feb 04 16:45:00 giulio kernel: PM: Cannot get swap writer
swapon -a gives no output, while swapon -s gives
/home/swapfile file 5242876 38324 0
Someone has any idea?
Last edited by giuliof (2014-02-08 12:00:46)

frank604 wrote:Can you post the journalctl associated to the hibernate attempt?
Yes, was the log I posted in the first post:
feb 05 20:19:49 giulio kernel: PM: thaw of devices complete after 345.225 msecs
feb 05 20:19:49 giulio kernel: PM: writing image.
feb 05 20:19:49 giulio kernel: PM: Cannot find swap device, try swapon -a.
feb 05 20:19:49 giulio kernel: PM: Cannot get swap writer
feb 05 20:19:49 giulio kernel: PM: Basic memory bitmaps freed
feb 05 20:19:49 giulio kernel: Restarting tasks ... done.

Similar Messages

  • [SOLVED]Hibernation fails with "systemd hibernate"

    Hibernation does not work on my laptop. After issuing the "systemd hibernate" laptop goes black, but after 10 seconds it wakes up again, with my lid light still blinking.
    I'm receiving "cannot find swap device" and "cannot get swap writer" message
    # systemctl hibernate
    A dependency job for hibernate.target failed. See 'journalctl -xn' for details.
    Last edited by letian_north (2012-12-02 16:35:04)

    Ok, I set that thing up.
    First try running
    #swapon -s
    Filename Type Size Used Priority
    /dev/sda4 partition 2091004 103532 -1
    If you don't see any output, then you need to make/activate your swap partition. For that purpose use any partition tool like fdisk/cfdisk. Read more here
    Then you need to check if your mkinitcpio.conf, grub, fstab have the necessary lines for your swap image file to be read at boot.
    Add this line to /etc/fstab file, so that swap is mounted by the system:
    # /dev/sda4
    UUID=YOUR_DISK_UUID_NUMBER none swap defaults 0 0
    to find the uuid of your swap partition do blkid /dev/sdaX, X -- is the number of your swap partition.
    Go to /etc/mkinitcpio.conf and add "resume" to HOOKS array like this:
    HOOKS="base udev autodetect pata scsi sata filesystems usbinput fsck resume"
    Go to /etc/default/grub and add this line "resume=/dev/sdaX" like this:
    GRUB_CMDLINE_LINUX="resume=/dev/sda4"
    After that run the following commands to update your grub setup and rebuild the ramdisk image.
    # grub-mkconfig -o /boot/grub/grub.cfg
    # mkinitcpio -p linux
    Go and try "systemctl hibernate", all should work now.
    Last edited by letian_north (2012-12-02 16:33:20)

  • [solved] Makepkg fails to sign package w/o asking password.

    I'm not sure when exactly this issue really started happening, but it was somewhere around the time that the new versions of Pacman and gnupg came out (a few weeks).
    I have a local ~/.makepkg.conf configured to sign any package I build with my key. The issue is that once any package completes building, and it is ready to be signed, I will sometimes be presented with a Pinentry screen to enter my password for signing the package and sometimes it will just fail to sign the package without ever asking for my password. There is no indication as to why it failed in the terminal output nor in the journal.
    This is happening on both of my Arch systems, so I know it's not just a localized issue with my one computer.
    Linux Betelgeuse 3.18.2-2-ARCH #1 SMP PREEMPT Fri Jan 9 07:37:51 CET 2015 x86_64 GNU/Linux
    Pacman, gnupg, and pinentry versions:
    [gilmoreja@Betelgeuse lib32-allegro]$ pacman -Qi pacman gnupg pinentry
    Name : pacman
    Version : 4.2.0-6
    Description : A library-based package manager with dependency support
    Architecture : x86_64
    URL : http://www.archlinux.org/pacman/
    Licenses : GPL
    Groups : base base-devel
    Provides : pacman-contrib
    Depends On : bash glibc libarchive>=3.1.2 curl>=7.39.0 gpgme pacman-mirrorlist
    archlinux-keyring
    Optional Deps : None
    Required By : cower pkgfile
    Optional For : None
    Conflicts With : pacman-contrib
    Replaces : pacman-contrib
    Installed Size : 4.22 MiB
    Packager : Allan McRae <[email protected]>
    Build Date : Sun 11 Jan 2015 11:44:40 PM CST
    Install Date : Mon 26 Jan 2015 07:13:41 AM CST
    Install Reason : Explicitly installed
    Install Script : No
    Validated By : Signature
    Name : gnupg
    Version : 2.1.1-1
    Description : Complete and free implementation of the OpenPGP standard
    Architecture : x86_64
    URL : http://www.gnupg.org/
    Licenses : GPL
    Groups : None
    Provides : dirmngr gnupg2=2.1.1
    Depends On : npth libgpg-error libgcrypt libksba libassuan pinentry bzip2 readline
    gnutls
    Optional Deps : libldap: gpg2keys_ldap [installed]
    libusb-compat: scdaemon [installed]
    Required By : gpgme
    Optional For : None
    Conflicts With : dirmngr gnupg2
    Replaces : dirmngr gnupg2
    Installed Size : 8.32 MiB
    Packager : Gaetan Bisson <[email protected]>
    Build Date : Tue 16 Dec 2014 01:39:55 PM CST
    Install Date : Wed 24 Dec 2014 06:17:22 PM CST
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Validated By : Signature
    Name : pinentry
    Version : 0.9.0-1
    Description : a collection of simple PIN or passphrase entry dialogs which utilize the Assuan
    protocol
    Architecture : x86_64
    URL : http://gnupg.org/related_software/pinentry/
    Licenses : GPL
    Groups : None
    Provides : None
    Depends On : ncurses libcap>=2.16
    Optional Deps : gtk2: for gtk2 backend [installed]
    qt4: for qt4 backend [installed]
    Required By : gnupg
    Optional For : None
    Conflicts With : None
    Replaces : None
    Installed Size : 329.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Wed 12 Nov 2014 05:43:08 AM CST
    Install Date : Wed 24 Dec 2014 06:17:21 PM CST
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Validated By : Signature
    makepkg output:
    ==> Tidying install...
    -> Purging unwanted files...
    -> Removing libtool files...
    -> Removing static library files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package "lib32-allegro"...
    -> Generating .PKGINFO file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Signing package...
    ==> WARNING: Failed to sign package file.
    ==> Leaving fakeroot environment.
    ==> Finished making: lib32-allegro 5.0.11-1 (Mon Jan 26 08:00:43 CST 2015)
    ==> Installing package lib32-allegro with pacman -U...
    Password:
    loading packages...
    error: '/home/gilmoreja/sources/lib32-allegro/lib32-allegro-5.0.11-1-x86_64.pkg.tar.xz': package missing required signature
    ==> WARNING: Failed to install built package(s).
    ==> Cleaning up...
    Current boot's journal:
    -- Logs begin at Wed 2014-12-24 18:48:34 CST, end at Mon 2015-01-26 08:02:04 CST. --
    Jan 26 07:01:14 Betelgeuse systemd-journal[106]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.8M free of 492.6M available → current limit 49.8M).
    Jan 26 07:01:14 Betelgeuse systemd-journal[106]: Permanent journal is using 272.0M (max allowed 1.9G, trying to leave 2.9G free of 8.8G available → current limit 1.9G).
    Jan 26 07:01:16 Betelgeuse systemd-journal[106]: Time spent on flushing to /var is 1.569419s for 2 entries.
    Jan 26 07:01:16 Betelgeuse kernel: Initializing cgroup subsys cpuset
    Jan 26 07:01:16 Betelgeuse kernel: Initializing cgroup subsys cpu
    Jan 26 07:01:16 Betelgeuse kernel: Initializing cgroup subsys cpuacct
    Jan 26 07:01:16 Betelgeuse kernel: Linux version 3.18.2-2-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 9 07:37:51 CET 2015
    Jan 26 07:01:16 Betelgeuse kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9fba7516-1115-4d75-a604-841e18996568 rw
    Jan 26 07:01:16 Betelgeuse kernel: tseg: 0000000000
    Jan 26 07:01:16 Betelgeuse kernel: e820: BIOS-provided physical RAM map:
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003ffcffff] usable
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x000000003ffd0000-0x000000003ffdefff] ACPI data
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x000000003ffdf000-0x000000003fffffff] ACPI NVS
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
    Jan 26 07:01:16 Betelgeuse kernel: NX (Execute Disable) protection: active
    Jan 26 07:01:16 Betelgeuse kernel: SMBIOS 2.3 present.
    Jan 26 07:01:16 Betelgeuse kernel: DMI: Magnell / , BIOS 1.04 01/21/2005
    Jan 26 07:01:17 Betelgeuse kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Jan 26 07:01:17 Betelgeuse kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00:00: AGP bridge
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe1ffffff] (old size 32MB)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe7ffffff] (128MB, APSIZE 0xf20)
    Jan 26 07:01:17 Betelgeuse kernel: e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x400000000
    Jan 26 07:01:17 Betelgeuse kernel: MTRR default type: uncachable
    Jan 26 07:01:17 Betelgeuse kernel: MTRR fixed ranges enabled:
    Jan 26 07:01:17 Betelgeuse kernel: 00000-9FFFF write-back
    Jan 26 07:01:17 Betelgeuse kernel: A0000-EFFFF uncachable
    Jan 26 07:01:17 Betelgeuse kernel: F0000-FFFFF write-protect
    Jan 26 07:01:17 Betelgeuse kernel: MTRR variable ranges enabled:
    Jan 26 07:01:17 Betelgeuse kernel: 0 base 0000000000 mask FFC0000000 write-back
    Jan 26 07:01:17 Betelgeuse kernel: 1 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 2 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 3 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 4 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 5 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 6 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 7 disabled
    Jan 26 07:01:17 Betelgeuse kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jan 26 07:01:17 Betelgeuse kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    Jan 26 07:01:17 Betelgeuse kernel: Scanning 1 areas for low memory corruption
    Jan 26 07:01:17 Betelgeuse kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x00000000-0x000fffff] page 4k
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b36000, 0x01b36fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b37000, 0x01b37fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b38000, 0x01b38fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x3fc00000-0x3fdfffff] page 2M
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x3c000000-0x3fbfffff] page 2M
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x00100000-0x3bffffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x00100000-0x001fffff] page 4k
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x00200000-0x3bffffff] page 2M
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x3fe00000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x3fe00000-0x3ffcffff] page 4k
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b39000, 0x01b39fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: RAMDISK: [mem 0x373b4000-0x379d1fff]
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Early table checksum verification disabled
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: RSDP 0x00000000000F7090 000014 (v00 ACPIAM)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: RSDT 0x000000003FFD0000 000030 (v01 A M I OEMRSDT 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: FACP 0x000000003FFD0200 000081 (v02 A M I OEMFACP 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: DSDT 0x000000003FFD03F0 003A1B (v01 258KA 258KA000 00000000 INTL 02002026)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: FACS 0x000000003FFDF000 000040
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: APIC 0x000000003FFD0390 000054 (v01 A M I OEMAPIC 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: OEMB 0x000000003FFDF040 000108 (v01 A M I AMI_OEM 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Local APIC address 0xfee00000
    Jan 26 07:01:17 Betelgeuse kernel: Scanning NUMA topology in Northbridge 24
    Jan 26 07:01:17 Betelgeuse kernel: No NUMA configuration found
    Jan 26 07:01:17 Betelgeuse kernel: Faking a node at [mem 0x0000000000000000-0x000000003ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: NODE_DATA(0) allocated [mem 0x3ffcc000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
    Jan 26 07:01:17 Betelgeuse kernel: Zone ranges:
    Jan 26 07:01:17 Betelgeuse kernel: DMA [mem 0x00001000-0x00ffffff]
    Jan 26 07:01:17 Betelgeuse kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: Normal empty
    Jan 26 07:01:17 Betelgeuse kernel: Movable zone start for each node
    Jan 26 07:01:17 Betelgeuse kernel: Early memory node ranges
    Jan 26 07:01:17 Betelgeuse kernel: node 0: [mem 0x00001000-0x0009efff]
    Jan 26 07:01:17 Betelgeuse kernel: node 0: [mem 0x00100000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: Initmem setup node 0 [mem 0x00001000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: On node 0 totalpages: 261998
    Jan 26 07:01:17 Betelgeuse kernel: DMA zone: 64 pages used for memmap
    Jan 26 07:01:17 Betelgeuse kernel: DMA zone: 21 pages reserved
    Jan 26 07:01:17 Betelgeuse kernel: DMA zone: 3998 pages, LIFO batch:0
    Jan 26 07:01:17 Betelgeuse kernel: DMA32 zone: 4032 pages used for memmap
    Jan 26 07:01:17 Betelgeuse kernel: DMA32 zone: 258000 pages, LIFO batch:31
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PM-Timer IO Port: 0x808
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Local APIC address 0xfee00000
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    Jan 26 07:01:17 Betelgeuse kernel: IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: IRQ0 used by override.
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: IRQ10 used by override.
    Jan 26 07:01:17 Betelgeuse kernel: Using ACPI (MADT) for SMP configuration information
    Jan 26 07:01:17 Betelgeuse kernel: smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Jan 26 07:01:17 Betelgeuse kernel: e820: [mem 0x40000000-0xfff7ffff] available for PCI devices
    Jan 26 07:01:17 Betelgeuse kernel: Booting paravirtualized kernel on bare hardware
    Jan 26 07:01:17 Betelgeuse kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
    Jan 26 07:01:17 Betelgeuse kernel: PERCPU: Embedded 30 pages/cpu @ffff88003fc00000 s82880 r8192 d31808 u2097152
    Jan 26 07:01:17 Betelgeuse kernel: pcpu-alloc: s82880 r8192 d31808 u2097152 alloc=1*2097152
    Jan 26 07:01:17 Betelgeuse kernel: pcpu-alloc: [0] 0
    Jan 26 07:01:17 Betelgeuse kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 257881
    Jan 26 07:01:17 Betelgeuse kernel: Policy zone: DMA32
    Jan 26 07:01:17 Betelgeuse kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9fba7516-1115-4d75-a604-841e18996568 rw
    Jan 26 07:01:17 Betelgeuse kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: Checking aperture...
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00:00: AGP bridge
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe1ffffff] (old size 32MB)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe7ffffff] (128MB, APSIZE 0xf20)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: Node 0: aperture [bus addr 0xe0000000-0xe7ffffff] (128MB)
    Jan 26 07:01:17 Betelgeuse kernel: Memory: 1013368K/1047992K available (5478K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 34624K reserved)
    Jan 26 07:01:17 Betelgeuse kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Jan 26 07:01:17 Betelgeuse kernel: Preemptible hierarchical RCU implementation.
    Jan 26 07:01:17 Betelgeuse kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 26 07:01:17 Betelgeuse kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 26 07:01:17 Betelgeuse kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
    Jan 26 07:01:17 Betelgeuse kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
    Jan 26 07:01:17 Betelgeuse kernel: NR_IRQS:8448 nr_irqs:256 0
    Jan 26 07:01:17 Betelgeuse kernel: spurious 8259A interrupt: IRQ7.
    Jan 26 07:01:17 Betelgeuse kernel: Console: colour dummy device 80x25
    Jan 26 07:01:17 Betelgeuse kernel: console [tty0] enabled
    Jan 26 07:01:17 Betelgeuse kernel: allocated 4194304 bytes of page_cgroup
    Jan 26 07:01:17 Betelgeuse kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 26 07:01:17 Betelgeuse kernel: tsc: Fast TSC calibration using PIT
    Jan 26 07:01:17 Betelgeuse kernel: tsc: Detected 798.222 MHz processor
    Jan 26 07:01:17 Betelgeuse kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 1597.96 BogoMIPS (lpj=2660740)
    Jan 26 07:01:17 Betelgeuse kernel: pid_max: default: 32768 minimum: 301
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Core revision 20140926
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: All ACPI Tables successfully acquired
    Jan 26 07:01:17 Betelgeuse kernel: Security Framework initialized
    Jan 26 07:01:17 Betelgeuse kernel: Yama: becoming mindful.
    Jan 26 07:01:17 Betelgeuse kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys memory
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys devices
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys freezer
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys net_cls
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys blkio
    Jan 26 07:01:17 Betelgeuse kernel: mce: CPU supports 5 MCE banks
    Jan 26 07:01:17 Betelgeuse kernel: Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
    Jan 26 07:01:17 Betelgeuse kernel: Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    Jan 26 07:01:17 Betelgeuse kernel: ftrace: allocating 20920 entries in 82 pages
    Jan 26 07:01:17 Betelgeuse kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jan 26 07:01:17 Betelgeuse kernel: smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 04, stepping: 0a)
    Jan 26 07:01:17 Betelgeuse kernel: Performance Events: AMD PMU driver.
    Jan 26 07:01:17 Betelgeuse kernel: ... version: 0
    Jan 26 07:01:17 Betelgeuse kernel: ... bit width: 48
    Jan 26 07:01:17 Betelgeuse kernel: ... generic registers: 4
    Jan 26 07:01:17 Betelgeuse kernel: ... value mask: 0000ffffffffffff
    Jan 26 07:01:17 Betelgeuse kernel: ... max period: 00007fffffffffff
    Jan 26 07:01:17 Betelgeuse kernel: ... fixed-purpose events: 0
    Jan 26 07:01:17 Betelgeuse kernel: ... event mask: 000000000000000f
    Jan 26 07:01:17 Betelgeuse kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jan 26 07:01:17 Betelgeuse kernel: x86: Booted up 1 node, 1 CPUs
    Jan 26 07:01:17 Betelgeuse kernel: smpboot: Total of 1 processors activated (1597.96 BogoMIPS)
    Jan 26 07:01:17 Betelgeuse kernel: devtmpfs: initialized
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registering ACPI NVS region [mem 0x3ffdf000-0x3fffffff] (135168 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: pinctrl core: initialized pinctrl subsystem
    Jan 26 07:01:17 Betelgeuse kernel: RTC time: 13:01:08, date: 01/26/15
    Jan 26 07:01:17 Betelgeuse kernel: NET: Registered protocol family 16
    Jan 26 07:01:17 Betelgeuse kernel: cpuidle: using governor ladder
    Jan 26 07:01:17 Betelgeuse kernel: cpuidle: using governor menu
    Jan 26 07:01:17 Betelgeuse kernel: node 0 link 0: io port [1000, ffffff]
    Jan 26 07:01:17 Betelgeuse kernel: TOM: 0000000040000000 aka 1024M
    Jan 26 07:01:17 Betelgeuse kernel: node 0 link 0: mmio [a0000, bffff]
    Jan 26 07:01:17 Betelgeuse kernel: node 0 link 0: mmio [40000000, ffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: bus: [bus 00-ff] on node 0 link 0
    Jan 26 07:01:17 Betelgeuse kernel: bus: 00 [io 0x0000-0xffff]
    Jan 26 07:01:17 Betelgeuse kernel: bus: 00 [mem 0x000a0000-0x000bffff]
    Jan 26 07:01:17 Betelgeuse kernel: bus: 00 [mem 0x40000000-0xfcffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: bus type PCI registered
    Jan 26 07:01:17 Betelgeuse kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jan 26 07:01:17 Betelgeuse kernel: PCI: Using configuration type 1 for base access
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(Module Device)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(Processor Device)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Actual Package length (202) is larger than NumElements field (4), truncated
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Interpreter enabled
    Jan 26 07:01:17 Betelgeuse kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: (supports S0 S3 S4 S5)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 26 07:01:17 Betelgeuse kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    Jan 26 07:01:17 Betelgeuse kernel: [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: PCI: root bus 00: hardware-probed resources
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    Jan 26 07:01:17 Betelgeuse kernel: PCI host bridge to bus 0000:00
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [mem 0x40000000-0xfcffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:00.0: [1039:0755] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: [1039:0002] type 01 class 0x060400
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.0: Enabling SiS 96x SMBus
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.1: reg 0x20: [io 0x0c00-0x0c1f]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: reg 0x20: [io 0xffa0-0xffaf]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io 0x03f6]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io 0x0376]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: reg 0x10: [io 0xe400-0xe4ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: reg 0x14: [io 0xe000-0xe07f]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: PME# supported from D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: System wakeup disabled by ACPI
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: reg 0x10: [io 0xe800-0xe8ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: reg 0x14: [io 0xec00-0xec7f]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: PME# supported from D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: System wakeup disabled by ACPI
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.0: reg 0x10: [mem 0xdfffd000-0xdfffdfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.1: reg 0x10: [mem 0xdfffe000-0xdfffefff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.3: reg 0x10: [mem 0xdffff000-0xdfffffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: reg 0x10: [io 0xd800-0xd8ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: reg 0x14: [mem 0xdfffc000-0xdfffcfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: reg 0x30: [mem 0xdffc0000-0xdffdffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: [104c:8023] type 00 class 0x0c0010
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: reg 0x10: [mem 0xdfffb800-0xdfffbfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: reg 0x14: [mem 0xdfff4000-0xdfff7fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: [1217:7114] type 02 class 0x060700
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: reg 0x10: [mem 0x00000000-0x00000fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: [1217:7114] type 02 class 0x060700
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: reg 0x10: [mem 0x00000000-0x00000fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: [1217:7110] type 00 class 0x088000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: reg 0x10: [mem 0xdfffa000-0xdfffafff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:0b.0: [1814:0201] type 00 class 0x028000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:0b.0: reg 0x10: [mem 0xdfff8000-0xdfff9fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: [1002:4e50] type 00 class 0x030000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x14: [io 0xc800-0xc8ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x18: [mem 0xdfef0000-0xdfefffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x30: [mem 0xdfec0000-0xdfedffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xdfcfffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: bridge configuration invalid ([bus 00-00]), reconfiguring
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: on NUMA node 0
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI : EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: loaded
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: bridge control possible 0000:01:00.0
    Jan 26 07:01:17 Betelgeuse kernel: PCI: Using ACPI for IRQ routing
    Jan 26 07:01:17 Betelgeuse kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 26 07:01:17 Betelgeuse kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Jan 26 07:01:17 Betelgeuse kernel: e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff]
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: Initializing
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: domain hash size = 128
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: unlabeled traffic allowed by default
    Jan 26 07:01:17 Betelgeuse kernel: Switched to clocksource refined-jiffies
    Jan 26 07:01:17 Betelgeuse kernel: pnp: PnP ACPI init
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP030b (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:02: Plug and Play ACPI device, IDs SYN0801 SYN0800 PNP0f13 (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:03: [dma 1]
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:03: Plug and Play ACPI device, IDs NSC6001 (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:04: [dma 0 disabled]
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0480-0x048f] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x04d0-0x04d1] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0800-0x087f] could not be reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0880-0x08ff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0c00-0x0c1f] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [mem 0xffe80000-0xffefffff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 07:01:17 Betelgeuse kernel: system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x000c0000-0x000d0fff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x00100000-0x3fffffff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 26 07:01:18 Betelgeuse kernel: pnp: PnP ACPI: found 8 devices
    Jan 26 07:01:18 Betelgeuse kernel: Switched to clocksource acpi_pm
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 0: assigned [mem 0x4c000000-0x4c000fff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 16: assigned [mem 0x54000000-0x57ffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 13: assigned [io 0x1000-0x10ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 14: assigned [io 0x1400-0x14ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 13: assigned [io 0x1800-0x18ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 14: assigned [io 0x1c00-0x1cff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xdfcfffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: CardBus bridge to [bus 02-05]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [io 0x1000-0x10ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [io 0x1400-0x14ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [mem 0x44000000-0x47ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [mem 0x48000000-0x4bffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: CardBus bridge to [bus 06-09]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [io 0x1800-0x18ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [io 0x1c00-0x1cff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [mem 0x50000000-0x53ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [mem 0x54000000-0x57ffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:01: resource 2 [mem 0xcfd00000-0xdfcfffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 2 [mem 0x44000000-0x47ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 3 [mem 0x48000000-0x4bffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 2 [mem 0x50000000-0x53ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 3 [mem 0x54000000-0x57ffffff]
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 2
    Jan 26 07:01:18 Betelgeuse kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: TCP: Hash tables configured (established 8192 bind 8192)
    Jan 26 07:01:18 Betelgeuse kernel: TCP: reno registered
    Jan 26 07:01:18 Betelgeuse kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 1
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:01:00.0: Video device with shadowed ROM
    Jan 26 07:01:18 Betelgeuse kernel: PCI: CLS 64 bytes, default 64
    Jan 26 07:01:18 Betelgeuse kernel: Unpacking initramfs...
    Jan 26 07:01:18 Betelgeuse kernel: Freeing initrd memory: 6264K (ffff8800373b4000 - ffff8800379d2000)
    Jan 26 07:01:18 Betelgeuse kernel: microcode: AMD CPU family 0xf not supported
    Jan 26 07:01:18 Betelgeuse kernel: Scanning for low memory corruption every 60 seconds
    Jan 26 07:01:18 Betelgeuse kernel: futex hash table entries: 256 (order: 2, 16384 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: Initialise system trusted keyring
    Jan 26 07:01:18 Betelgeuse kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 26 07:01:18 Betelgeuse kernel: zpool: loaded
    Jan 26 07:01:18 Betelgeuse kernel: zbud: loaded
    Jan 26 07:01:18 Betelgeuse kernel: VFS: Disk quotas dquot_6.5.2
    Jan 26 07:01:18 Betelgeuse kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: msgmni has been set to 1991
    Jan 26 07:01:18 Betelgeuse kernel: Key type big_key registered
    Jan 26 07:01:18 Betelgeuse kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 26 07:01:18 Betelgeuse kernel: io scheduler noop registered
    Jan 26 07:01:18 Betelgeuse kernel: io scheduler deadline registered
    Jan 26 07:01:18 Betelgeuse kernel: io scheduler cfq registered (default)
    Jan 26 07:01:18 Betelgeuse kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jan 26 07:01:18 Betelgeuse kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=0
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: scrolling: redraw
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000200000, using 3072k, total 3072k
    Jan 26 07:01:18 Betelgeuse kernel: Console: switching to colour frame buffer device 128x48
    Jan 26 07:01:18 Betelgeuse kernel: fb0: VESA VGA frame buffer device
    Jan 26 07:01:18 Betelgeuse kernel: GHES: HEST is not enabled!
    Jan 26 07:01:18 Betelgeuse kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 26 07:01:18 Betelgeuse kernel: platform serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
    Jan 26 07:01:18 Betelgeuse kernel: Linux agpgart interface v0.103
    Jan 26 07:01:18 Betelgeuse kernel: rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
    Jan 26 07:01:18 Betelgeuse kernel: rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
    Jan 26 07:01:18 Betelgeuse kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Jan 26 07:01:18 Betelgeuse kernel: TCP: cubic registered
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 10
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 17
    Jan 26 07:01:18 Betelgeuse kernel: Loading compiled-in X.509 certificates
    Jan 26 07:01:18 Betelgeuse kernel: registered taskstats version 1
    Jan 26 07:01:18 Betelgeuse kernel: Magic number: 15:262:29
    Jan 26 07:01:18 Betelgeuse kernel: rtc_cmos 00:00: setting system clock to 2015-01-26 13:01:09 UTC (1422277269)
    Jan 26 07:01:18 Betelgeuse kernel: PM: Hibernation image not present or could not be loaded.
    Jan 26 07:01:18 Betelgeuse kernel: Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    Jan 26 07:01:18 Betelgeuse kernel: Write protecting the kernel read-only data: 8192k
    Jan 26 07:01:18 Betelgeuse kernel: Freeing unused kernel memory: 656K (ffff88000155c000 - ffff880001600000)
    Jan 26 07:01:18 Betelgeuse kernel: Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    Jan 26 07:01:18 Betelgeuse kernel: random: systemd-tmpfile urandom read with 2 bits of entropy available
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Initialized drm 1.1.0 20060810
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon kernel modesetting enabled.
    Jan 26 07:01:18 Betelgeuse kernel: checking generic (d0000000 300000) vs hw (d0000000 8000000)
    Jan 26 07:01:18 Betelgeuse kernel: fb: switching to radeondrmfb from VESA VGA
    Jan 26 07:01:18 Betelgeuse kernel: Console: switching to colour dummy device 80x25
    Jan 26 07:01:18 Betelgeuse kernel: [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1584:0x2324).
    Jan 26 07:01:18 Betelgeuse kernel: [drm] register mmio base: 0xDFEF0000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] register mmio size: 65536
    Jan 26 07:01:18 Betelgeuse kernel: [drm:radeon_agp_init] *ERROR* Unable to acquire AGP: -19
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Forcing AGP to PCI mode
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Generation 2 PCI interface, using max accessible memory
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Detected VRAM RAM=128M, BAR=128M
    Jan 26 07:01:18 Betelgeuse kernel: [drm] RAM width 128bits DDR
    Jan 26 07:01:18 Betelgeuse kernel: [TTM] Zone kernel: Available graphics memory: 510898 kiB
    Jan 26 07:01:18 Betelgeuse kernel: [TTM] Initializing pool allocator
    Jan 26 07:01:18 Betelgeuse kernel: [TTM] Initializing DMA pool allocator
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: 128M of VRAM memory ready
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: 512M of GTT memory ready.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: power management initialized
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] PCI GART of 512M enabled (table at 0x0000000037980000).
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: WB enabled
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff88003791e000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Driver supports precise vblank timestamp query.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: irq initialized.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Loading R300 Microcode
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: ring at 0x00000000B0001000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] ring test succeeded in 2 usecs
    Jan 26 07:01:18 Betelgeuse kernel: [drm] ib test succeeded in 0 usecs
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Panel ID String: Samsung LTN154X1 WXGA
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Panel Size 1280x800
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Radeon Display Connectors
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Connector 0:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] VGA-1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Encoders:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] CRT1: INTERNAL_DAC1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Connector 1:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] LVDS-1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Encoders:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] LCD1: INTERNAL_LVDS
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Connector 2:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] SVIDEO-1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Encoders:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] TV1: INTERNAL_DAC2
    Jan 26 07:01:18 Betelgeuse kernel: [drm] fb mappable at 0xD0040000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] vram apper at 0xD0000000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] size 4096000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] fb depth is 24
    Jan 26 07:01:18 Betelgeuse kernel: [drm] pitch is 5120
    Jan 26 07:01:18 Betelgeuse kernel: fbcon: radeondrmfb (fb0) is primary device
    Jan 26 07:01:18 Betelgeuse kernel: Console: switching to colour frame buffer device 160x50
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: registered panic notifier
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    Jan 26 07:01:18 Betelgeuse kernel: i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jan 26 07:01:18 Betelgeuse kernel: i8042: Detected active multiplexing controller, rev 1.0
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: SCSI subsystem initialized
    Jan 26 07:01:18 Betelgeuse kernel: ACPI: bus type USB registered
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new interface driver usbfs
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new interface driver hub
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new device driver usb
    Jan 26 07:01:18 Betelgeuse kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci: EHCI PCI platform driver
    Jan 26 07:01:18 Betelgeuse kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci: OHCI PCI platform driver
    Jan 26 07:01:18 Betelgeuse kernel: libata version 3.00 loaded.
    Jan 26 07:01:18 Betelgeuse kernel: firewire_ohci 0000:00:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: EHCI Host Controller
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: cache line size of 64 is not supported
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: irq 23, io mem 0xdffff000
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
    Jan 26 07:01:18 Betelgeuse kernel: hub 1-0:1.0: USB hub found
    Jan 26 07:01:18 Betelgeuse kernel: hub 1-0:1.0: 6 ports detected
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.0: OHCI PCI host controller
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.0: irq 20, io mem 0xdfffd000
    Jan 26 07:01:18 Betelgeuse kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jan 26 07:01:18 Betelgeuse kernel: hub 2-0:1.0: USB hub found
    Jan 26 07:01:18 Betelgeuse kernel: hub 2-0:1.0: 3 ports detected
    Jan 26 07:01:18 Betelgeuse kernel: pata_sis 0000:00:02.5: version 0.5.2
    Jan 26 07:01:18 Betelgeuse kernel: pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
    Jan 26 07:01:18 Betelgeuse kernel: scsi host0: pata_sis
    Jan 26 07:01:18 Betelgeuse kernel: scsi host1: pata_sis
    Jan 26 07:01:18 Betelgeuse kernel: ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    Jan 26 07:01:18 Betelgeuse kernel: ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.1: OHCI PCI host controller
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.1: irq 21, io mem 0xdfffe000
    Jan 26 07:01:18 Betelgeuse kernel: hub 3-0:1.0: USB hub found
    Jan 26 07:01:18 Betelgeuse kernel: hub 3-0:1.0: 3 ports detected
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: 195371568 sectors, multi 16: LBA48
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: limited to UDMA/33 due to 40-wire cable
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: configured for UDMA/33
    Jan 26 07:01:18 Betelgeuse kernel: scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA 1A PQ: 0 ANSI: 5
    Jan 26 07:01:18 Betelgeuse kernel: usb 1-3: new high-speed USB device number 3 using ehci-pci
    Jan 26 07:01:18 Betelgeuse kernel: ata2.00: ATAPI: Slimtype DVDRW SOSW-852S, PSX3, max UDMA/33
    Jan 26 07:01:18 Betelgeuse kernel: ata2.00: configured for UDMA/33
    Jan 26 07:01:18 Betelgeuse kernel: scsi 1:0:0:0: CD-ROM Slimtype DVDRW SOSW-852S PSX3 PQ: 0 ANSI: 5
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 26 07:01:18 Betelgeuse kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Jan 26 07:01:18 Betelgeuse kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 26 07:01:18 Betelgeuse kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 26 07:01:18 Betelgeuse kernel: firewire_core 0000:00:06.0: created device fw0: GUID 00030d5325828ec4, S400
    Jan 26 07:01:18 Betelgeuse kernel: tsc: Refined TSC clocksource calibration: 798.238 MHz
    Jan 26 07:01:18 Betelgeuse kernel: sda: sda1 sda2 sda3 < sda5 sda6 >
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 26 07:01:18 Betelgeuse kernel: usb 2-1: new low-speed USB device number 2 using ohci-pci
    Jan 26 07:01:18 Betelgeuse kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new interface driver usbhid
    Jan 26 07:01:18 Betelgeuse kernel: usbhid: USB HID core driver
    Jan 26 07:01:18 Betelgeuse kernel: input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:045E:076C.0001/input/input5
    Jan 26 07:01:18 Betelgeuse kernel: microsoft 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:03.0-1/input0
    Jan 26 07:01:18 Betelgeuse kernel: EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    Jan 26 07:01:18 Betelgeuse kernel: Switched to clocksource tsc
    Jan 26 07:01:18 Betelgeuse kernel: random: nonblocking pool is initialized
    Jan 26 07:01:18 Betelgeuse systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    Jan 26 07:01:18 Betelgeuse systemd[1]: Detected architecture 'x86-64'.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Set hostname to <Betelgeuse>.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Remote File Systems.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Reached target Remote File Systems.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Encrypted Volumes.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Reached target Encrypted Volumes.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Expecting device dev-sda2.device...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Root Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice Root Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting User and Session Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice User and Session Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Journal Audit Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Device-mapper event daemon FIFOs.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Device-mapper event daemon FIFOs.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting udev Control Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on udev Control Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting LVM2 metadata daemon socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on LVM2 metadata daemon socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting System Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice System Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Slices.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Reached target Slices.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting system-getty.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice system-getty.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting udev Kernel Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on udev Kernel Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Expecting device dev-sda6.device...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Journal Socket (/dev/log).
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Journal Socket (/dev/log).
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Journal Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Journal Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Journal Service...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Huge Pages File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Setup Virtual Console...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started File System Check on Root Device.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Debug File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting udev Coldplug all Devices...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Remount Root and Kernel File Systems...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting POSIX Message Queue File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Temporary Directory...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting system-systemd\x2dfsck.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice system-systemd\x2dfsck.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Delayed Shutdown Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Delayed Shutdown Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Expecting device dev-sda1.device...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Create list of required static device nodes for the current kernel...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Set Up Additional Binary Formats...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Load Kernel Modules.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounted FUSE Control File System.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Apply Kernel Variables...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Configuration File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 117 (systemd-binfmt)
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Arbitrary Executable File Formats File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Create list of required static device nodes for the current kernel.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started udev Coldplug all Devices.
    Jan 26 07:01:18 Betelgeuse kernel: EXT4-fs (sda5): re-mounted. Opts: data=ordered
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Remount Root and Kernel File Systems.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Load/Save Random Seed...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Rebuild Dynamic Linker Cache.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started First Boot Wizard.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Create System Users.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting Create Static Device Nodes in /dev...
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Rebuild Hardware Database.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Arbitrary Executable File Formats File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Debug File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Huge Pages File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted POSIX Message Queue File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Configuration File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Temporary Directory.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Apply Kernel Variables.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Load/Save Random Seed.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Set Up Additional Binary Formats.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Create Static Device Nodes in /dev.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting udev Kernel Device Manager...
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting Local File Systems (Pre).
    Jan 26 07:01:19 Betelgeuse systemd[1]: Reached target Local File Systems (Pre).
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Setup Virtual Console.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started udev Kernel Device Manager.
    Jan 26 07:01:19 Betelgeuse kernel: tsc: Marking TSC unstable due to TSC halts in idle
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: acpi_idle registered with cpuidle
    Jan 26 07:01:19 Betelgeuse kernel: Switched to clocksource acpi_pm
    Jan 26 07:01:19 Betelgeuse kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/PNP0C0D:00/input/input6
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Lid Switch [LID]
    Jan 26 07:01:19 Betelgeuse kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Sleep Button [SLPB]
    Jan 26 07:01:19 Betelgeuse kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Power Button [PWRB]
    Jan 26 07:01:19 Betelgeuse kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Power Button [PWRF]
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: AC Adapter [AC0] (on-line)
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Battery Slot [BAT0] (battery present)
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    Jan 26 07:01:19 Betelgeuse kernel: [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    Jan 26 07:01:19 Betelgeuse kernel: acpi device:02: registered as cooling_device1
    Jan 26 07:01:19 Betelgeuse kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input10
    Jan 26 07:01:19 Betelgeuse kernel: parport_pc 00:04: reported by Plug and Play ACPI
    Jan 26 07:01:19 Betelgeuse kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
    Jan 26 07:01:19 Betelgeuse kernel: thermal LNXTHERM:00: registered as thermal_zone0
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Thermal Zone [THRM] (75 C)
    Jan 26 07:01:19 Betelgeuse kernel: sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
    Jan 26 07:01:19 Betelgeuse kernel: NET: Registered protocol family 23
    Jan 26 07:01:19 Betelgeuse kernel: agpgart-amd64 0000:00:00.0: AGP bridge [1039/0755]
    Jan 26 07:01:19 Betelgeuse kernel: agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
    Jan 26 07:01:19 Betelgeuse systemd-journal[106]: Journal started
    Jan 26 07:01:15 Betelgeuse systemd-udevd[143]: starting version 218
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting Flush Journal to Persistent Storage...
    Jan 26 07:01:20 Betelgeuse systemd[1]: Found device TOSHIBA_MK1032GAX 1.
    Jan 26 07:01:20 Betelgeuse systemd[1]: Starting File System Check on /dev/sda1...
    Jan 26 07:01:20 Betelgeuse systemd[1]: Started Journal Service.
    Jan 26 07:01:20 Betelgeuse kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, chip->init
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, Found chip at base=0x02e
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jan 26 07:01:20 Betelgeuse kernel: nsc_ircc_open(), can't get iobase of 0x2f8
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, Found chip at base=0x02e
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jan 26 07:01:20 Betelgeuse kernel: nsc_ircc_open(), can't get iobase of 0x2f8
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, chip->init
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, Found chip at base=0x02e
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc 00:03: disabled
    Jan 26 07:01:20 Betelgeuse kernel: sis900.c: v1.08.10 Apr. 2 2006
    Jan 26 07:01:20 Betelgeuse kernel: mousedev: PS/2 mouse device common for all mice
    Jan 26 07:01:20 Betelgeuse kernel: snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 52717 usecs (2536 samples)
    Jan 26 07:01:20 Betelgeuse kernel: snd_intel8x0 0000:00:02.7: clocking to 48000
    Jan 26 07:01:20 Betelgeuse kernel: 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
    Jan 26 07:01:20 Betelgeuse kernel: 0000:00:04.0: Using transceiver found at address 1 as default
    Jan 26 07:01:20 Betelgeuse kernel: eth0: SiS 900 PCI Fast Ethernet at 0x000000000001d800, IRQ 19, 00:03:0d:32:21:af
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: CardBus bridge found [1584:3005]
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
    Jan 26 07:01:20 Betelgeuse kernel: input: PC Speaker as /devices/platform/pcspkr/input/input11
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0a38, PCI irq 17
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: Socket status: 30000820
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.1: CardBus bridge found [1584:3005]
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.1: ISA IRQ mask 0x0a38, PCI irq 17
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.1: Socket status: 30000006
    Jan 26 07:01:20 Betelgeuse kernel: MCE: In-kernel MCE decoding enabled.
    Jan 26 07:01:20 Betelgeuse kernel: EDAC MC: Ver: 3.0.0
    Jan 26 07:01:20 Betelgeuse kernel: AMD64 EDAC driver v3.4.0
    Jan 26 07:01:20 Betelgeuse kernel: EDAC amd64: DRAM ECC enabled.
    Jan 26 07:01:20 Betelgeuse kernel: EDAC amd64: K8 revE or earlier detected (node 0).
    Jan

    Ok, thanks. My confusion was because I was unaware that makepkg was simply a bash script.
    I did what you suggested, and copied it to my home directory, edited the create_signature section to add the --verbose option and changed it to output to stdout. I added --verbose, --debug-level guru, and --log-file options to my gpg-agent.conf file. I ran the makepkg process twice, and as expected it asked for a password the first attempt and failed immediately on the second attempt. When it should be loading a cached password, it is bombing out with a "Broken pipe" error.
    Terminal output of build 1:
    [gilmoreja@Betelgeuse pulseaudio-ctl]$ ~/makepkg -fics
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Making package: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:10:51 CST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Found pulseaudio-ctl-1.59.tar.xz
    ==> Validating source files with sha256sums...
    pulseaudio-ctl-1.59.tar.xz ... Passed
    ==> Extracting sources...
    -> Extracting pulseaudio-ctl-1.59.tar.xz with bsdtar
    ==> Removing existing $pkgdir/ directory...
    ==> Starting build()...
    Setting version
    ==> Entering fakeroot environment...
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Starting package()...
    Installing main script, initd and config...
    install -Dm755 common/pulseaudio-ctl "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/bin/pulseaudio-ctl"
    install -Dm644 common/config.skel "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/pulseaudio-ctl/config.skel"
    Installing manpage...
    install -Dm644 doc/pulseaudio-ctl.1 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    gzip -9 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    ==> Tidying install...
    -> Purging unwanted files...
    -> Removing libtool files...
    -> Removing static library files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package "pulseaudio-ctl"...
    -> Generating .PKGINFO file...
    -> Adding install file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Signing package...
    gpg: no running gpg-agent - starting '/usr/bin/gpg-agent'
    gpg: waiting for the agent to come up ... (5s)
    gpg: connection to agent established
    gpg: writing to '/home/gilmoreja/sources/pulseaudio-ctl/pulseaudio-ctl-1.59-2-any.pkg.tar.xz.sig'
    gpg: RSA/SHA256 signature from: "7397C1D5 James A. Gilmore II (Unknown Zombie) <[email protected]>"
    -> Created signature file /home/gilmoreja/sources/pulseaudio-ctl/pulseaudio-ctl-1.59-2-any.pkg.tar.xz.sig.
    ==> Leaving fakeroot environment.
    ==> Finished making: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:10:58 CST 2015)
    ==> Installing package pulseaudio-ctl with pacman -U...
    Password:
    ==> ERROR: Aborted by user! Exiting...
    Terminal output of build 2:
    [gilmoreja@Betelgeuse pulseaudio-ctl]$ ~/makepkg -fics
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Making package: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:11:03 CST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Found pulseaudio-ctl-1.59.tar.xz
    ==> Validating source files with sha256sums...
    pulseaudio-ctl-1.59.tar.xz ... Passed
    ==> Extracting sources...
    -> Extracting pulseaudio-ctl-1.59.tar.xz with bsdtar
    ==> Removing existing $pkgdir/ directory...
    ==> Starting build()...
    Setting version
    ==> Entering fakeroot environment...
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Starting package()...
    Installing main script, initd and config...
    install -Dm755 common/pulseaudio-ctl "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/bin/pulseaudio-ctl"
    install -Dm644 common/config.skel "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/pulseaudio-ctl/config.skel"
    Installing manpage...
    install -Dm644 doc/pulseaudio-ctl.1 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    gzip -9 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    ==> Tidying install...
    -> Purging unwanted files...
    -> Removing libtool files...
    -> Removing static library files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package "pulseaudio-ctl"...
    -> Generating .PKGINFO file...
    -> Adding install file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Signing package...
    gpg: writing to '/home/gilmoreja/sources/pulseaudio-ctl/pulseaudio-ctl-1.59-2-any.pkg.tar.xz.sig'
    gpg: signing failed: Broken pipe
    gpg: signing failed: Broken pipe
    ==> WARNING: Failed to sign package file.
    ==> Leaving fakeroot environment.
    ==> Finished making: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:11:04 CST 2015)
    ==> Installing package pulseaudio-ctl with pacman -U...
    Password:
    ==> ERROR: Aborted by user! Exiting...
    [gilmoreja@Betelgeuse pulseaudio-ctl]$
    gpg-agent.log file for build 1:
    2015-01-26 15:10:52 gpg-agent[10408] listening on socket '/home/gilmoreja/.gnupg/S.gpg-agent'
    2015-01-26 15:10:52 gpg-agent[10409] gpg-agent (GnuPG) 2.1.1 started
    2015-01-26 15:10:53 gpg-agent[10409] handler 0x7f88cc221700 for fd 5 started
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK Pleased to meet you, process 10406
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- RESET
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION ttyname=/dev/pts/0
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION ttytype=xterm
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION display=:0.0
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION xauthority=/home/gilmoreja/.Xauthority
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION lc-ctype=en_US.UTF-8
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION lc-messages=en_US.UTF-8
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION allow-pinentry-notify
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION agent-awareness=2.1.0
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- AGENT_ID
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> ERR 67109139 Unknown IPC command <GPG Agent>
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- HAVEKEY 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847 316BA63D673F62666176D0B2896B145BDABD9733
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- KEYINFO 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847
    2015-01-26 15:10:53 gpg-agent[10409] DBG: agent_get_cache '2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847' (mode 2) ...
    2015-01-26 15:10:53 gpg-agent[10409] DBG: ... miss
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> S KEYINFO 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847 D - - - P - - -
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- RESET
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- SIGKEY 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- SETKEYDESC Please+enter+the+passphrase+to+unlock+the+OpenPGP+secret+key:%0A%22James+A.+Gilmore+II+(Unknown+Zombie)+<[email protected]>%22%0A2048-bit+RSA+key,+ID+7397C1D5,%0Acreated+2012-06-04.%0A
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- SETHASH 8 BEEA84C75FC026299EBB643F8FB19AEC25D5722936A59DB29DBD95C299B9A3C6
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- PKSIGN
    2015-01-26 15:10:53 gpg-agent[10409] DBG: agent_get_cache '2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847' (mode 2) ...
    2015-01-26 15:10:53 gpg-agent[10409] DBG: ... miss
    2015-01-26 15:10:53 gpg-agent[10409] starting a new PIN Entry
    2015-01-26 15:10:53 gpg-agent[10409] DBG: connection to PIN entry established
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> INQUIRE PINENTRY_LAUNCHED 10411
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- END
    2015-01-26 15:10:58 gpg-agent[10409] DBG: agent_put_cache '2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847' (mode 2) requested ttl=0
    2015-01-26 15:10:58 gpg-agent[10409] DBG: skey: (private-key
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (rsa
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (n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
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (e #010001#)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (d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
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (p #00D95A0315DA1A1177A0C0018EBB94887BA3FA454F17603AA8BB67C59796A1F102011BF676A3290437F03CD1AA9EA5F25CB22138DDDBE1048501F8294204E3AA639CBB1803B1F85E1BF57921B581DBD6201A83B333A1A93A13E372501CB55F5E2DFF991F41C1B3800E1C9DD3E303356FCF2382A7C80D6433780BC6C4E66D371493#)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (q #00E4B879C556CED294F545C4E4AF22B1C9F908566D6C9377FD598370AB7FC8672C49FAAB0E1CD6FC3C092A117EC0EFE0D0D1C2B9148C721422A7AE174E1DCB831D490302DE30435B75E822E71A288ED3783DDD8C15152C7ABFB29235D4F8217D3A8FFB6862A1A51A8A70CA74111A9E43A0FFE7E576DBB7FB3E2C6D711929A77515#)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (u #00B2BF39C398644392803548A393068F7F7226F147FB95B9C6CF72C12A626CF698D028694E3FDC1AA217132068906FABC2CA9F7CBB2A47B8B09DF5FDCFD34872C2074F4E2FAC358C0F61C8A32BEFEB9D8862A042BD3DADE6001C39B70D9574FC8B9CCD1DA012959CF2BBD4258A2A339FF99C3200E4CA36F2D623BEE4E6245551EC#)))
    2015-01-26 15:10:58 gpg-agent[10409] DBG: hash: (data
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (flags pkcs1)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (hash sha256 #BEEA84C75FC026299EBB643F8FB19AEC25D5722936A59DB29DBD95C299B9A3C6#))
    2015-01-26 15:10:58 gpg-agent[10409] DBG: PKCS#1 block type 1 encoded data:+01ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffff003031300d060960864801650304020105000420be \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ea84c75fc026299ebb643f8fb19aec25d5722936a59db29dbd95c299b9a3c6
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign data:+01ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffff003031300d060960864801650304020105000420be \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ea84c75fc026299ebb643f8fb19aec25d5722936a59db29dbd95c299b9a3c6
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign n:+c230cad4c56184746321e1333ba70f10dfc93a6f6f4cfd4074111fd46e8c9774 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: e9f42acb30a02074322705fef1bf3a0d21c9d9a3e26eeb37c25fdbe18b057bdb \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: aa8aaa44c7e109ca1164ea051062c5da14def16cc40dc9a832438e5068c70b58 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 0cd22744ed6d98cae9f4a69817fc11775ff3a06abe870e12a4acfb1f49480d60 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 2903e2ce85dadaf0caaa5a5e4264956736bc7cbe71c7d5ac402fe594ae6e04b0 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: accfb5ead9ca26c7ede89ad69811cdf9735fa1eab7984fc731913d12f500acf3 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: abeed2dfe589dc27eabe117421069a6432a609ef794b69b2cda1e32df0cee11b \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 53d89750624daec0d731db447837cc696b77f427f0bd9fbb2a276d6618d0df0f
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign e:+010001
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign d:+1d170513799c01a513c29c033a40ece358bac2cbb5af2152f9f024c60467803a \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: cddf3b57e3e960e3372e1c5a542992cf2bcc1a93cfd450dd31fb7d2b5cd18dfb \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: daa0da1fe297660984b08ad4065fdd86ad50b676d629c097372c6291ce185f2d \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 2a02834a728cd3f235b8e609ebb1e185f1f443882a117e3cb1b98e06e249ee62 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: c1ff7687cca650976001757d1d210581538f8252f12731b5f75e5b2b0c6c2478 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 059e9d9d2be8d9f402b139ec3385730d00cb95114c02b0dec2d4234e8fa610c3 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 07487e0f89bc373726317e7cf09daca54505c01bda0e9af1435a0a01008e1c11 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 6b104d0eb56b4e4138c87f0e6ef406bfb518f8dd18bd08fab629fa971b094bdd
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign p:+d95a0315da1a1177a0c0018ebb94887ba3fa454f17603aa8bb67c59796a1f102 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 011bf676a3290437f03cd1aa9ea5f25cb22138dddbe1048501f8294204e3aa63 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 9cbb1803b1f85e1bf57921b581dbd6201a83b333a1a93a13e372501cb55f5e2d \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ff991f41c1b3800e1c9dd3e303356fcf2382a7c80d6433780bc6c4e66d371493
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign q:+e4b879c556ced294f545c4e4af22b1c9f908566d6c9377fd598370ab7fc8672c \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 49faab0e1cd6fc3c092a117ec0efe0d0d1c2b9148c721422a7ae174e1dcb831d \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 490302de30435b75e822e71a288ed3783ddd8c15152c7abfb29235d4f8217d3a \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 8ffb6862a1a51a8a70ca74111a9e43a0ffe7e576dbb7fb3e2c6d711929a77515
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign u:+b2bf39c398644392803548a393068f7f7226f147fb95b9c6cf72c12a626cf698 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: d028694e3fdc1aa217132068906fabc2ca9f7cbb2a47b8b09df5fdcfd34872c2 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 074f4e2fac358c0f61c8a32befeb9d8862a042bd3dade6001c39b70d9574fc8b \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 9ccd1da012959cf2bbd4258a2a339ff99c3200e4ca36f2d623bee4e6245551ec
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign res:+c1dd570db98531a7b86260e0a122377b462c1b827d1f4406091dfcb4b8f6b26f \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 35c098eb70ebd6adc8abfce8d44185c5ac9c503f45037cf1adaf82b07fb63f69 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 13592df46b34381788a618c73db29a3fc0282d6ccfc957d4638a339d83b315bd \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ff70ab17b658f99ebfaba934f7ef1409e8300b362176458d805faa86bc6150b1 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 389f8148c045c64baf5a794d3f1319b090d7aeba2a11598b250943b51f4d26e5 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: cdfe9c6558694e5ea3268ea343001a160e0276241b330af00f28404b82840961 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: aabbf16aebbb0d7d2278bcaa028f7b59b2c2d8cedb9afe3a146936af8bf1154f \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 92bfbedec50777b1be1dd813618f9ed681ea7cebc554ae0e0fa1f52d421ffe52
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign => Success
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rslt: (sig-val
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (rsa
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (s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
    2015-01-26 15:10:58 gpg-agent[10409] DBG: chan_5 -> [ 44 20 28 37 3a 73 69 67 2d 76 61 6c 28 33 3a 72 ...(277 byte(s) skipped) ]
    2015-01-26 15:10:58 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:58 gpg-agent[10409] DBG: chan_5 <- [eof]
    2015-01-26 15:10:58 gpg-agent[10409] handler 0x7f88cc221700 for fd 5 terminated
    gpg-agent.log file for build 2:
    2015-01-26 15:11:04 gpg-agent[10409] handler 0x7f88cc221700 for fd 5 started
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK Pleased to meet you, process 10656
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- RESET
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION ttyname=/dev/pts/0
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION ttytype=xterm
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION display=:0.0
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION xauthority=/home/gilmoreja/.Xauthority
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION lc-ctype=en_US.UTF-8
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION lc-messages=en_US.UTF-8
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION allow-pinentry-notify
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION agent-awareness=2.1.0
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- AGENT_ID
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> ERR 67109139 Unknown IPC command <GPG Agent>
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- HAVEKEY 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847 316BA63D673F62666176D0B2896B145BDABD9733
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- KEYINFO 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847
    Last edited by gilmoreja (2015-01-26 23:08:59)

  • [solved]script fails when changing profile through powerdevil.

    i use ondemand governor and i want to change up_threshold value.
    Whenever i change profile through powerdevil up_threshold gets its default vaule of 80.
    what i did was to create a script named threshold containing the lines:
    #!/bin/bash
    sudo sh -c 'echo 50 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold'
    i have also set through /etc/sudoers that this script is passwordless for my user.
    if i run the script, it successfully changes the value. It also runs successfully if i put it in startup.
    My problem is that it fails to run when i choose it to run when a profile loads through powerdevil. I am refering to the feature shown below :
    at first i thought that this function has a problem. so i chose to run kate, and when i changed profile, kate started immediately. So i guess that there is a problem with my script.
    Any ideas?
    Last edited by mechmg93 (2009-10-20 20:14:30)

    I hope someone reads this thread also its already marked as solved...
    Anyway, i would like to use CPU frequency scaling, but in the powermanagement settings,
    i cant shoose anything for frequency scaling.
    What do i have to do to be able to set "ondemand" or "always lowest frequency"?
    Wich daemons and/or modules do i have to activate to change the frequency policy?
    Would be very nice if someone could help me.

  • [SOLVED] Bumblebee: Failed to initialize GPU with Lenovo ThinkPad W530

    SOLVED: See post #20
    After years, I decided to come back to the wonderful distro, Arch and back to the forums. Yay!
    However, I installed Arch to my new laptop - Lenovo ThinkPad W530 and it uses NVIDIA Quadro K1000M alongside Intel graphics with Optimus technology. Arch is running fine, but I cannot run applications through optirun and I get:
    [exitium@rambutan ~]$ optirun -vv nvidia-settings
    [ 485.536478] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 485.536909] [DEBUG]optirun version 3.2.1 starting...
    [ 485.536922] [DEBUG]Active configuration:
    [ 485.536927] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 485.536931] [DEBUG] X display: :8
    [ 485.536934] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
    [ 485.536938] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 485.536941] [DEBUG] Accel/display bridge: auto
    [ 485.536945] [DEBUG] VGL Compression: proxy
    [ 485.536948] [DEBUG] VGLrun extra options:
    [ 485.536952] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    [ 485.536972] [DEBUG]Using auto-detected bridge virtualgl
    [ 485.537190] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 485.537204] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 485.537209] [DEBUG]Socket closed.
    [ 485.537223] [ERROR]Aborting because fallback start is disabled.
    [ 485.537229] [DEBUG]Killing all remaining processes.
    As seen, it says "Failed to initialize the NVIDIA GPU". I have tried different solutions found from these forums and several other places but none of them have worked - the problem remains same. Does anyone have idea how I could fix this? I read somewhere else that there could be issues with newest nvidia drivers - is this possible?
    bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    Option "AutoAddGPU" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    Section "Device"
    Identifier "DiscreteNvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    # If the X server does not automatically detect your VGA device,
    # you can manually set it here.
    # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    # as you see in the commented example.
    # This Setting may be needed in some platforms with more than one
    # nvidia card, which may confuse the proprietary driver (e.g.,
    # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"
    # Setting ProbeAllGpus to false prevents the new proprietary driver
    # instance spawned to try to control the integrated graphics card,
    # which is already being managed outside bumblebee.
    # This option doesn't hurt and it is required on platforms running
    # more than one nvidia graphics card with the proprietary driver.
    # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    # If this option is not set, the new Xorg may blacken the screen and
    # render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    Thank you in advance!
    Last edited by Exitium (2013-12-18 11:29:54)

    Hi!
    Exactly the same issue here. Notebook -> Thinkpad W530
    Currently running on:
    linux 3.11.3-1
    nvidia 325.15-8
    nvidia-utils 325.15-1
    bbswitch 0.7-14
    Error:
    username@hostname ~ $ optirun -vv nvidia-settings
    [  839.449203] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [  839.449495] [INFO]Configured driver: nvidia
    [  839.449729] [DEBUG]optirun version 3.2.1 starting...
    [  839.449774] [DEBUG]Active configuration:
    [  839.449817] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [  839.449836] [DEBUG] X display: :8
    [  839.449856] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
    [  839.449875] [DEBUG] Socket path: /var/run/bumblebee.socket
    [  839.449890] [DEBUG] Accel/display bridge: auto
    [  839.449909] [DEBUG] VGL Compression: proxy
    [  839.449936] [DEBUG] VGLrun extra options:
    [  839.449953] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    [  839.449996] [DEBUG]Using auto-detected bridge virtualgl
    [  839.450294] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
    [  839.450344] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
    [  839.450373] [DEBUG]Socket closed.
    [  839.450398] [ERROR]Aborting because fallback start is disabled.
    [  839.450419] [DEBUG]Killing all remaining processes.
    dmesg output:
    [   81.162604] bbswitch: enabling discrete graphics
    [   81.396637] pci 0000:01:00.0: power state changed by ACPI to D0
    [   81.396663] thinkpad_acpi: EC reports that Thermal Table has changed
    [   81.483200] nvidia: module license 'NVIDIA' taints kernel.
    [   81.483205] Disabling lock debugging due to kernel taint
    [   81.488096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [   81.488289] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    [   81.488294] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  325.15  Wed Jul 31 18:50:56 PDT 2013
    [   81.665938] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
    [   81.670434] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670528] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670594] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670659] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670723] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.671192] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.671258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.879826] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.905471] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [   85.905479] NVRM: os_pci_init_handle: invalid context!
    [   85.905481] NVRM: os_pci_init_handle: invalid context!
    [   85.905486] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [   85.905490] NVRM: os_pci_init_handle: invalid context!
    [   85.905491] NVRM: os_pci_init_handle: invalid context!
    [   85.930135] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930442] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930719] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930990] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931526] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931794] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932062] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932329] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932595] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932862] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933129] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933396] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933662] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933942] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934197] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934452] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934706] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935215] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935469] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935722] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935976] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.940508] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
    [   85.940517] NVRM: rm_init_adapter(0) failed
    xorg.conf.nvidia:
    Section "ServerLayout"
        Identifier  "Layout0"
        Option      "AutoAddDevices" "false"
        Option      "AutoAddGPU" "false"
    EndSection
    Section "Device"
        Identifier  "DiscreteNvidia"
        Driver      "nvidia"
        VendorName  "NVIDIA Corporation"
    #   If the X server does not automatically detect your VGA device,
    #   you can manually set it here.
    #   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    #   as you see in the commented example.
    #   This Setting may be needed in some platforms with more than one
    #   nvidia card, which may confuse the proprietary driver (e.g.,
    #   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
        BusID "PCI:01:00:0"
    #   Setting ProbeAllGpus to false prevents the new proprietary driver
    #   instance spawned to try to control the integrated graphics card,
    #   which is already being managed outside bumblebee.
    #   This option doesn't hurt and it is required on platforms running
    #   more than one nvidia graphics card with the proprietary driver.
    #   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    #   If this option is not set, the new Xorg may blacken the screen and
    #   render it unusable (unless you have some way to run killall Xorg).
        Option "ProbeAllGpus" "false"
        Option "NoLogo" "true"
        Option "UseEDID" "false"
        Option "UseDisplayDevice" "none"
    EndSection
    bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=nvidia
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    #         bbswitch - new in BB 3, recommended if available
    #       switcheroo - vga_switcheroo method, use at your own risk
    #             none - disable PM completely
    # https://github.com/Bumblebee-Project/Bu … PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

  • SOLVED: makepkg fails at signing package

    Hi all,
    I'm trying to build a package from AUR but makepkg fails to sign the package.
    I receive the following message: "==> WARNING: Failed to sign package file." and nothing else.
    I have, as far as i can tell, installed all the necessary keys (pacman-key --recv-key and pacman-key --lsign). I even tried to completely reset the keyring  (remove of /etc/pacman.d/gnupg, pacman-key --init, ...) but it does not solve my problem.
    I can see the key when issuing pacman-key -l.
    Any idea is welcome cause I'm completely loss right now and I fear becoming nuts...
    Last edited by calyce (2012-05-25 23:02:49)

    https://wiki.archlinux.org/index.php/De … g_Packages
    That should explain everything you need to sign packages
    To sign packages you need your own key, what comes with pacman is the developers' keys for the packages in the repos
    Last edited by ethail (2012-05-25 16:16:27)

  • [SOLVED] Evince failed to open any PDF documents after upgrade

    I have a x86 version Archlinux on a 32-bit intel platform. After recent upgrade, the Evince package was updated to 2.32.0-3, which fails to open any PDF documents. It gives a notification says "Unable to open document: File type PDF document (application/pdf) is not supported".
    No other package was installed/removed. It just stop working after the upgrade.
    Looking forward for any suggestions/solutions. Thanks in advance~~
    Last edited by d7wang (2010-10-09 10:32:40)

    Thank you so much.
    The problem is solved as soon as I replaced the modified freetype2 from AUR with the official package. There seems to be something incompatible with the upgraded system.

  • [solved]Network fails to start sometimes

    Hello!
    I'm having a problem with my network. Sometimes it fails to start. Usually, a reboot solves this. Here is the error log:
    [root@claudia log]# cat errors.log
    Aug 6 03:16:28 claudia dhcpcd[3194]: dhcpStart: interface eth0 is not Ethernet or 802.2 Token Ring
    rc.conf:
    # NETWORKING
    HOSTNAME="claudia"
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(!gateway)
    hosts:
    [root@claudia log]# cat /etc/hosts
    # /etc/hosts: static lookup table for host names
    #<ip> <hostname> <hostname>
    127.0.0.1 localhost.localdomain localhost claudia
    # End of file
    What should I do to solve this?
    Thanks and regards,
    Gustavo

    I'd say it's because since the ethernet over firewire module is loaded too,   it's counted as a network device too - and which one gets to be eth0 depends if the NIC or ethernet over firewire module is loaded first. There are many solutions to this:
    1) If you don't need ethernet over firewire, keep it from being loaded by putting the module name (eth1394 I think) in MOD_BLACKLIST in /etc/rc.conf, like this:
    MOD_BLACKLIST=(eth1394)
    2) You can make both eth0 and eth1 (and perhaps other NICs too) start up together (I do this with my 2 NICs). To do that, make the rc.conf network section something like this:
    lo="lo 127.0.0.1"
    eth0="dhcp"
    eth1="dhcp"
    INTERFACES=(lo eth0 eth1)
    Then you should put a @ in front of "network" ( @network ) in the DAEMONS array unless you like waiting for a NIC that won't start

  • [SOLVED] MPD: Failed to create socket

    I've  been attempting to get MPD working today and I'm rather stumped here. I got it to start out of its default directory, however, that denied it access to my music folder. So, I switched all of that to a ~/.mpd folder as the wiki page instructed me (https://wiki.archlinux.org/index.php/Mu … _as_a_User), and for purposes of keeping organized.
    Now, however, I'm getting this error whenever I run "mpd ~/.mpd/mpd.conf"
    Failed to bind to '[::]:6600': Failed to create socket: Address family not supported by protocol
    I remember that happening before, and it had to do with user permissions and so on. I think I set "user" to "mpd" that time. "User" is now set to my user, where the .mpd folder is located. Is there a way to allow mpd to continue?
    EDIT: My mpd.conf is:
    playlist_directory "~/.mpd/playlists"
    db_file "~/.mpd/mpd.db"
    log_file "~/.mpd/mpd.log"
    pid_file "~/.mpd/mpd.pid"
    state_file "~/.mpd/mpdstate"
    user "spencer"
    mixer_type "software"
    audio_output {
    type "alsa"
    name "Sound Card"
    bind_to_address "any"
    Last edited by DrKillPatient (2011-08-05 02:38:35)

    DrKillPatient wrote:
    That worked, thanks. At first it gave "failed to open database" but in subsequent startups it's not doing that-- I suppose it created the file at the first time. audio_output's not defined, I suppose that's up to me to set it? It's autodetected at this point and seems to work fine. Should I leave it that way?
    And out of curiosity, what was changed to fix my error?
    First of all: thanks for testing. my setup creates 2 static hosts, instead of letting mpd autodetect it. sometimes ipv6 detection is prefered and this *can* lead to stuff not working properly.
    Also i use absolute paths, to make sure everything works.
    mpds audio output detection works decently, you can of course enable one in ~/.mpdconf to get rid of the warning.
    Also you had one obvious error: you followed mpds wiki entry to start mpd as user. but you defined a user in mpd.conf. this will not work, since mpd can only drop previlegs to that user, when run as root.
    Oh, please mark this thread as solved.
    Last edited by Rasi (2011-08-05 01:26:43)

  • [SOLVED] Wireless fails after suspending (Realtek 8192se)

    This problem is already solved on the first post: I spent so long trying to solve it that I thought people should know the solution.
    I have a Lenovo X100e with a Realtek 8192SE wireless card.  I'm running kernel 3.0.  The machine has, since upgrading to the 3.0 kernel had the annoying problem of failing wireless connections after suspending: I'll have a running wireless connection, then suspend the machine, and then wake the machine up and the machine cannot connect to any wireless network (perhaps the same one I was connected to before, in the same place). 
    Things that did not work:
    Installing the Realtek drivers from their website
    Downgrading the kernel from 3.1 to 3.0
    Using wicd instead of networkmanager
    Walking around
    Other distributions
    The solution was to put an entry in /etc/pm/config.d/config:
    SUSPEND_MODULES="rtl8192se rtlwifi mac80211 cfg80211"
    Now the machine reconnects with no problems.
    This may be the solution to the other big problem I was having with the 3.1 kernel: I would suspend the machine by any means and the screen goes black and the machine becomes non-responsive without actually suspending.  I may try upgrading to the 3.1 kernel and adding radeon to the SUSPEND_MODULES list above.

    Found out more which might be significant for madwifi users:
    According to the wiki I loaded the following modules in rc.conf: ath-hal, ath9k, wlan
    Beside this one line in the modprobe.conf should be added: alias ath0 ath_pci. This way wicd as well as networkmanager used ath0 for connecting to wireless.
    After the update I noticed that there is another wifi device in ifconfig listed: wlan0. So I suspected that 2 devices pointing at the same hardware may cause the instability, but de-activating one by ifconfig didn't help. Now I noticed by loading the modules one by one that the new ath9k is already defining wlan0 and the wireless starts working without loading the module wlan. It looks stable so far, but if I should be right I'm impossibly the only one having this trouble.
    Confirmation would be nice, but I will mark this thread "solved" now.

  • [SOLVED]fsck fails on bootup due to other hdd name

    Hi,
    is set up arch today on an initially 2 hdd sys ...
    after it was set up and the files i wanted to keep were moved to the hdd which would remain, i disconnected one hdd  ..
    (i had to change grub/menu.lst   sdb1 ---> sda1 due to this disconnect)
    unfortunatly during bootup fsck still thinks it must check sdb1 which will fail because its not there
    How do i solve this,
    thanks,
    Last edited by birdspider (2008-01-14 18:35:56)

    ok sry,  I had just to remount the hdd RW and rename those issues in fstab

  • [Solved] Makepkg fails on all Mercurial (*-hg) packages

    Hello,
    I'm not sure if this is a result of recent updates, but I noticed that makepkg now fails on all mercurial packages. I attempted to install both the dillo browser and pytyle, and received the following messages (this is for pytyle2-hg, but the messages were basically identical):
    ==> Determining latest hg revision...
    warning: pytyle.googlecode.com certificate with fingerprint e9:f0:26:b1:ff:27:28:33:81:8e:51:7b:fd:a7:de:df:4c:1e:ee:14 not verified (check hostfingerprints or web.cacerts config setting)
    real URL is https://pytyle.googlecode.com/hg/
    requesting all changes
    adding changesets
    adding manifests
    adding file changes
    added 39 changesets with 303 changes to 115 files
    updating to branch default
    36 files updated, 0 files merged, 0 files removed, 0 files unresolved
    -> Version found: 38
    ==> Making package: pytyle2-hg 38-1 (Tue Feb 7 22:02:49 EST 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    ==> Extracting Sources...
    ==> Entering fakeroot environment...
    ==> Starting build()...
    ==> Connecting to Mercurial server...
    warning: pytyle.googlecode.com certificate with fingerprint e9:f0:26:b1:ff:27:28:33:81:8e:51:7b:fd:a7:de:df:4c:1e:ee:14 not verified (check hostfingerprints or web.cacerts config setting)
    real URL is https://pytyle.googlecode.com/hg/
    pulling from https://pytyle.googlecode.com/hg//pytyle
    searching for changes
    no changes found
    ==> ERROR: A failure occurred in build().
    Aborting...
    Rerunning makepkg in the same directory fails to get through the version check phase:
    ==> Determining latest hg revision...
    warning: pytyle.googlecode.com certificate with fingerprint e9:f0:26:b1:ff:27:28:33:81:8e:51:7b:fd:a7:de:df:4c:1e:ee:14 not verified (check hostfingerprints or web.cacerts config setting)
    real URL is https://pytyle.googlecode.com/hg/
    pulling from https://pytyle.googlecode.com/hg//pytyle
    searching for changes
    no changes found
    ==> ERROR: An unknown error has occurred. Exiting...
    The mercurial portion of both packages seems to match the VCS template exactly. Executing "hg clone [hgroot] [hgrepo]" works, as does performing a pull from the cloned directory.
    Any help would be greatly appreciated.
    Regards,
    szim90
    Last edited by szim90 (2012-02-08 10:00:50)

    That does appear to be the cause of this problem. Thanks karol - marking as solved.
    Last edited by szim90 (2012-02-08 10:00:34)

  • [Solved] Pacman fails to get packages http 403 or 404 error

    Hi,
    I'm not sure if I should raise this as a bug or not, or indeed if I am doing something fundamentally wrong...
    Pacman tells me there are updates to do, but:
    Using the mirror "mirrors.manchester.m247.com" I get a 404 error
    Using the mirror "http://mirror.bytemark.co.uk/archlinux/$repo/os/$arch" I get a 403 error
    example:
    # pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date 0.0 B 0.00B/s 00:00 [-----------------------------------------------------------------------] 0%
    community is up to date 0.0 B 0.00B/s 00:00 [-----------------------------------------------------------------------] 0%
    multilib is up to date 0.0 B 0.00B/s 00:00 [-----------------------------------------------------------------------] 0%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for conflicting packages...
    Packages (9) ca-certificates-mozilla-3.18-3 dhcpcd-6.8.1-1 gnupg-2.1.2-3 iptables-1.4.21-3 p11-kit-0.23.1-2 procps-ng-3.3.10-2 sudo-1.8.13-1 which-2.21-1 whois-5.2.7-1
    Total Download Size: 0.03 MiB
    Total Installed Size: 21.35 MiB
    Net Upgrade Size: 4.34 MiB
    :: Proceed with installation? [Y/n]
    :: Retrieving packages ...
    error: failed retrieving file 'whois-5.2.7-1-x86_64.pkg.tar.xz' from mirrors.manchester.m247.com : The requested URL returned error: 404
    warning: failed to retrieve some files
    error: failed to commit transaction (unexpected error)
    Errors occurred, no packages were upgraded.
    any ideas?
    [edited to add solved tag to title]
    Last edited by flangemonkey (2015-04-01 15:29:18)

    Hi flangemonkey,
    that mirror was not synced yet when you did the upgrade (the last sync ended today at 10:54 UTC, about 17 mitues after you posted on this borad). It should be ok now, just try to redo the update. Next time, you may want to check first the status of the mirrors https://www.archlinux.org/mirrors/status
    edit: typo
    Last edited by mauritiusdadd (2015-04-01 11:06:10)

  • [SOLVED]Pacman fails to update

    Hi,
    It's been a while, so I hope this issue can be resolved here, and I'll be on my best behaviour. I tried an update (system-wide) with
    pacman -Syu
    it came back with :
    error: failed to commit transaction (conflicting files)
    initscripts: /etc/profile.d/locale.sh exists in filesystem
    Errors occurred, no packages were upgraded.
    What do I do next?
    Thanks for helping out
    Thor
    Last edited by Thor@Flanders (2011-10-26 09:38:53)

    Will do, tnx.
    New-year resolution: read the news on-site more often.
    Marking this as solved
    Last edited by Thor@Flanders (2011-10-26 09:38:33)

  • [Solved] Pacman fails to satisfied java-runtime dependency on upgrade

    Hi. So I haven't been able to upgrade yesterday or today because of this bug. I couldn't figure out how to solve it on my own.
    This is what happens when I try to upgrade:
    jake@levi> sudo pacman -Syyu ~
    :: Synchronizing package databases...
    core 104.8 KiB 76.7K/s 00:01 [##################################################################################################] 100%
    extra 1389.5 KiB 187K/s 00:07 [##################################################################################################] 100%
    community 1549.8 KiB 191K/s 00:08 [##################################################################################################] 100%
    multilib 89.7 KiB 145K/s 00:01 [##################################################################################################] 100%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: languagetool: requires java-runtime>=6
    :: rhino: requires java-runtime
    I have jre7-openjdk-headless already installed, which provides java-runtime 7, so I don't see why I could be running into any problems.
    [1] jake@levi> pacman -Qi jre7-openjdk-headless ~
    Name : jre7-openjdk-headless
    Version : 7.b147_2.1-1
    URL : http://icedtea.classpath.org
    Licenses : custom
    Groups : None
    Provides : java-runtime=7
    Depends On : libjpeg-turbo lcms2 nss ca-certificates-java rhino
    Optional Deps : libcups: needed for Java Mauve support - libmawt.so
    fontconfig: needed for Java Mauve support - libmawt.so
    Required By : languagetool rhino
    Conflicts With : java-runtime openjdk6
    Replaces : None
    Installed Size : 107421.00 KiB
    Packager : Andreas Radke <[email protected]>
    Architecture : x86_64
    Build Date : Wed Feb 15 06:36:20 2012
    Install Date : Thu Mar 1 14:06:19 2012
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Description : Free Java environment based on OpenJDK 7.0 with IcedTea7 replacing binary plugs - Minimal Java runtime - needed for executing non GUI Java programs
    There could be something I don't understand though. Any help is appreciated.
    Last edited by Coward (2012-03-08 00:30:57)

    mira wrote:
    Karol's advice did not worked for me, so I did this:
    pacman -Rdd jre7-openjdk-headless
    and after that this:
    pacman -S jre7-openjdk
    and then the update worked as it should. Hope that helps somebody.
    Not sure what was the issue in your case, but I did say "Try to ignore the conflicts and see if it works out." and by that I meant the '-dd' switch.
    Now I see I should have been explicit about it as my comment doesn't make it clear at all.

Maybe you are looking for

  • Insert new line item in va01&va02 - urgent

    Hi frndz, At the time of creation standard sales order using va01. When user enters the sold to party in header and then material & quantity in line item reocrds. After user enters the details in first line. I have some checks to be executed and on t

  • Install PeopleTools 8.53 with Linux Issue: Boot Application Server Domain PT853 using psadmin

    Folks, Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Database 11gR1. OS is Oracle Linux 5. I confront the issue regarding booting Application Server Domain PT853 while Database Server is listening as below:

  • CS5 with Windows XP?

    Does anyone know if Adobe (or someone else) has announced any technote or other material about running InDesign CS5 (and other CS5 softwares) in Windows XP? • Possible problems? • 32- or 64 bits, does it matter? • Any tricks for optimizing performanc

  • Init scripts feature request

    Hello, I see that 'depmod -a' operation runs on every system boot. I think that it's not very necessary and if it will be an option in rc.conf to disable this operation it will be realy cool. Also, i see now that netcfg doesn't support a feature to a

  • Changing apple id will remove icloud content?

    hello , so my question is that im using an apple id currently and i want to change the apple id to another one and im worried that if i change it it will remove the stuff that i have in my device. simply : i want to delete the old icloud (my device)