[SOLVED] how to enable ssh access to new user

I have created a new user on arch with "useradd newuser", but the "newuser" is not able to login wit ssh.
I have checked the /etc/passwd, which has this line:
newuser:x:1005:100:newuser,22,111222,111222:/home/newuser:/bin/bash
I restarted ssh and even rebooted machine, checked the folder /home/newuser exists, but I still can't login with newuser. On the other hand I can successfully login with "olduser" which is also a normal user (not root) and member of same group (users)...
What am I missing? What is the procedure for creating a new user that can login with ssh?
Thank you very much!
Jernej
Last edited by jernej (2009-12-02 14:26:46)

If you don't mind, change the subject of your thread to include
[SOLVED]
So other folks with the same issue can easily find an answer.
Thanks

Similar Messages

How to get ssh access to my Azure Website?

Hi,
I can connect to Website via FilZilla using ftp hostname and username. But how to get ssh access to Azure Wedsite?

ssh is not supported, but FTP should absolutely work using FileZilla. You can also use the
Kudu Console, which gives you a console into your site.

How to Enable Anonymous access to a SharePoint 2013 site e.g for specific site,list etc..

Hi All,
I'm working on an extranet and i would like users to be able to fill a form on the site.
Since i'm going to use sharepoint 2013 how can i configure sharepoint to use both anonymous access and windows authentication at the same time.
I know for sure it can be done but what can be allowed for anonymous access e.g specific list site etc..
I would need to make some area available as anonymous e.g a whole site as i would like to brand it a little to host the form.Any tips of who has configured similar would be appreciated

Hi Patrick,
Thanks for posting your query, Kindly follow the below mentioned steps to enable Anonymous access to a SharePoint 2013 site.
In Central Administration, under Application Management., click Manage web applications.
Select the web application you want to enable anonymous access for.
In the Security group on the ribbon, click Authentication Providers.
In the Authentication Providers dialog box, under Zone, click Default.
On the Edit Authentication page, select the Enable anonymous access check box.
Click Save.
Close the Authentication Providers dialog box.
Also, browse the below mentioned URLs for more details
http://blog.cloudshare.com/2012/10/15/how-to-enable-anonymous-access-to-a-sharepoint-2013-site/
http://www.sharepoint-journey.com/how-to-enable-anonymous-access-in-sharepoint-2013.html
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How do you set up a new user account on Mountain Lion?

How can I set up a new user account on my 24 inch iMac?

Log in as an administrator. Open System Preferences and go to Users & Groups.
You create the new user account there.
regards

Create User Activity: How to add Roles to the new user

Hi all,
My Problem is Using LC Workbench I have created one process it is having Create User Activity. I am able to creating the new user with this process.
But I dont have idea how to add roles to that new user? Please anybody can help me out
Thanks in advance.

Hi,
I used Built-in Componets till now, Please help me out What are the steps needed to implement a custom componet.
Thanks in advance

How to enable database access from Java or CSharp ?

I set up an Oracle Express database on my local computer.
Now I want to connect to this databsee from a CSharp (or Java) program.
How do I have to specify the connection string?
The following does NOT work:
connectionstring = "Data Source=XE;User Id=karl;Password=mypassword";
connection = new OracleConnection(connectionstring);
connection.Open();
I am getting an error
"Invalid argument" ORA-12532 error
How do I have to specify the connection string otherwise ?
Is the sequence of the parameter Data Source, User Id and Password
important ?
How do I get a more detailed error message from Oracle ?
Do I have to enable the accessibility from outside programs
in Oracle somewhere ?

about to the error:
ORA-12532 TNS:invalid argument
Cause: An internal function received an invalid parameter. This message is not normally visible to the user.
Action: For further details, turn on tracing and re-execute the operation. If the error persists, contact Oracle Support Services.
Regards

How to enable AP to a new ledger

Hi,
Cst on SR 3-6428707821 asked,
How to enable the AP module to a newly created ledger?
Creating new instance is defining new ledger. create new responsibilities for other modules (AP, AR, GL, ONT,...) and enable it with this new Ledger
In GL i know how to create New Ledger (Set Of Book).
Now i need to know how to enable the payable responsibility in the new ledger.
Thanks

Hi
If I understand correcly, you have created a GL within a new instance and also have some sub ledgers enabled (i.e. Payables, etc). What I am not clear on is whether you have created the AP responsibilities or not. If you have, you will need to associate the sub ledger responsibilities with the relevant GL Ledger. With each responsibility that you create, you will need to set the 'GL Ledger Name' profile option within SysAdmin. This will automatically set the profile option of 'GL Ledger ID' with a value. This value is a ledger ID which is unique (called set of books ID in 11i)
If using Oracle Subledgers whose menus contain General Ledger windows that require data access set information, you must assign the appropriate ledger to this profile
option for each subledger application or responsibility. This profile option controls the ledger that each subledger will use for transaction processing. The ledger assigned to the GL Ledger Name profile option will automatically be assigned to the GL: Data Access Set profile option. You can change the default assignment made to the GL: Data Access Set profile option if you want to access more ledgers in General Ledger. However, any changes made to the GL Ledger Name profile option will automatically be applied to the GL: Data Access Set profile option. You cannot view this profile option at the user level. Your System Administrator can set this profile option at the site, application or responsibility level.
Should your question be related to actually configuring the sub ledger modules you will need to follow all related setup steps for each application assuming you have these licenced.
http://docs.oracle.com/cd/E18727_01/nav/financials.htm
Please mark this as helpful/correct if relevant. I hope this was helpful.
Regards
Ian
www.project.eu.com

Keychain: How to enable automatic access for certain applications?

I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine, and Quicksilver neeing my system password all the time when installing updates.
How do I enable automatic access to the keychain and system password for certain applications, but not all?
PowerBook G4, 1.5 Ghz Mac OS X (10.4.6)

Hi, Bjørn.
A. You wrote: "I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine..."There are two things to check. You'll use Keychain Access — in the Macintosh HD > Applications > Utilities folder — for both.
One key point to note before you begin: If the affected account was created under Jaguar, it's default keychain will have the same name as the account's short name. Accounts created under Panther or later have the default keychain name of "login." The user's default keychain is always highlighted in bold in the Keychains list in Keychain Access. All of the instructions in Mac Help regarding keychain assume the accounts were created under Tiger and always refer to keychain "login."
Here are the two issues to check and correct:
1. The affected account may have its keychain preferences set so that the keychain locks automatically after a period of inactivity or after sleep mode:1.1. Select the user's default keychain.
1.2. Click Edit > Change Settings for Keychain "keychain_name."
1.3. Deselect the checkbox next to "Lock after __ minutes of inactivity", if selected.
1.4. Deselect the checkbox next to "Lock when sleeping", if selected.
1.5. Click Save.2. The affected account's login password and keychain password are different. Set the keychain password on that account to be the same as the account's login password. See “Mac OS X 10.4 Help: Changing your keychain password.”
Once those steps are taken, if an application requests access to the keychain, click Always Allow.
Note that if you update applications, i.e. install later versions, you may be asked once to confirm the new version's access to your keychain. That's a standard security precaution.
B. You wrote: "...Quicksilver neeing my system password all the time when installing updates."That cannot be prevented if that application is installed in the Macintosh HD > Applications folder using an installer, such as the Mac OS X Installer. Authentication is required if an installer will add or change files in either Applications or other System-related folders.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

IIS 6.0 and Tomcat 5.0.30, how to enable anonymous access?

Dear All,
Thanks to Adam Krouskop's great guide (2003) i got IIS 6 and Tomcat 5 working together using the isapi connector. But.... IIS won't give anonymous access to my Tomcat web-apps.
When i go to http://localhost/jsp-examples it pops up a login window, when I enter my administrator username and password it will log me on and everything works fine. But how do i enable anonymous access??
This might not be best place to post this question but I know there's people out here who know. Thanks in advance.
Greetings from Holland. T.

This is probably way too late to help you out but I just ran into the same problem with IIS 6.0. The thing that is missing from the connector instructions is that it does not tell you to add the DLL as a web service extension. Here is how to do that after adding the ISAPI filter:
1) In the IIS manager, right-click on Web Service Extensions. Choose "Add a new Web service extension...".
2) Type in a meaninful name for the extension, like "tomcat".
3) Click the "Add" button.
4) Type the full pathname for the isapi_redirect.dll file or click "Browse" button to find it.
5) Check the "Set extension status to Allowed" checkbox.
6) Click "OK" to add the new extension. Verify by clicking on Web Service Extensions folder and seeing the new one in the right-hand pane.
7) Now go ahead and restart IIS as in the original instructions.
Hope this helps someone in the future...

How to invalidate old sessions when new user access appl on same machine

hi all,
I am using Mozilla browser to access my web application.User one access my application using his credentials .but i left that browser open.after that I am opening the another Mozilla window and accessing my application using different credentials ex:user2 credentials .user 2 also can access my application.but when i open the first browser ..am automatically getting second user session.how can we avoid this problem.
Application is using session identifier(jSessionID) as the URL parameter for session management.
is it possible to invalidate the old session when new user access on same machine.
thanks,
Vishnu

VishnuReddy wrote:
hi all,
I am using Mozilla browser to access my web application.User one access my application using his credentials .but i left that browser open.after that I am opening the another Mozilla window and accessing my application using different credentials ex:user2 credentials .user 2 also can access my application.but when i open the first browser ..am automatically getting second user session.how can we avoid this problem.That shouldn't occur. Either you explained it the wrong way (or I interpreted it the wrong way), or there's huge bug in your login/logout logic. After opening another window inside the same session, you should still be logged in as the first user.

How to enable ojc compiler in new oracle jdeveloper 11g IDE

Hi,
we can compile java files using ojc compiler in Jdeveloper 10g IDE.
I need this option in New Jdeveloper 11g IDE.
Can any one tell me how to enable the ojc compiler? ( I need detailed steps to enable ojc compiler)
I got class version error while i compile using javac in new Jdeveloper 11g IDE.
(Class file size also differ from both compiler)
So that, I want ojc compiler in new Jdeveloper 11g IDE.
Regards,
Karthi
Edited by: user12957451 on May 4, 2010 1:09 AM

I guess you can't. The ojc compiler is not part of jdev 11g, javac is the tool of choice.
Timo

ESW: how to enable developer access to the ES workplace systems

Hi,
I received the access from ES workplace for ECC . But I dont have any authorization create any object , the role S_DEVELOP is not assigned to me ,
How to get developer access for the ES Workplace systems ( unable to creat new object ) ?
is it like that P users dont have developer access in all systems ?
How to get assign my user ID with the required roles ?
Experts Pls guide me on the same .
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Nov 27, 2010 6:01 PM

hi,
it requires a userid and password to get authorization for developping object.
i already had these information but i don't know where should i use it to get authorization.
can anyone who already have passed through this problem can guide?

How do I readily access my new imacro add-on?

I just installed iMacros for Firefox
https://addons.mozilla.org/en-US/firefox/addon/imacros-for-firefox/#id=3863
and I see that it was installed as an extension as per "Tools". However, I thought this new installation would generate an app on the Firefox toolbar that would enable me to access this new add-on. But no such icon is displaying (I also did a Firefox restart: no luck). Is there other way to generate or locate the app for iMacros?

Thanks, jscher2000; Clicking on the F8 key did the trick.

How can I set up a new user account that has access to iPhoto data on Admin account?

I have set up a new user account for my son. I have set up his parental controls but I would like him to have access to the data in iPhoto and iTunes from the Admin account. I do allow him access to the applications with the parental controls, but they are empty. Thanks for your help!

Is your regular user an Admin?
Yes. So is the new account I tried to set up.
Are these apps installed in the main /Applications folder?
Yes.
Are they App Store apps or installs from disc/download?
Both, but App Store purchases are a clear minority, and aren't much of a problem, due to the ease of re-downloading and activating. The downloaded programs are the ones that present the problems. I have not been good about archiving serial numbers and the like, mostly because I've never had a problem like this before.
What specific apps are you having trouble with? For instance, I know that MS Office and Adobe CS5 for perfectly well for all users on my MBP.
This is a very long list. Let me give you some of it, and if you really need all of them, I'll add to the list later.
1Password 4
ABBYY FineReader for ScanSnap
Adobe Acrobat 8 Professional
Adobe Photoshop Elements 8 plus On ONE add-on filters
Burn
calibre
DiskTracker
Dragon Dictate
Flv Crunch 1.5.0
GraphicConverter
Harmony Assistant
iBank
iSkysoft iMedia Converter Deluxe
MacX Video Converter Pro
QMidi
Screenium
Unison
WireTap Studio
Also, what troubleshooting steps have you taken so far?
Not much, since I have no idea where the problem is. I looked for some central repository of software serial numbers or activations, but didn't find one.

Best practice for SSH access by a user across multiple Xserves?

Hello.
I have 3 Xserves and a Mac Mini server I'm working with and I need SSH access to all these machines. I have given myself access via SSH in Server Admin access settings and since all 4 servers are connected to an OD Master (one of the three Xserves), I'm able to SSH into all 4 machines using my username/password combination.
What I'm unsure of though is, how do I deal with my home folder when accessing these machines? For example, currently, when I SSH into any of the machines, I get an error saying...
CFPreferences: user home directory at /99 is unavailable. User domains will be volatile.
It then asks for my password, which I enter, and then I get the following error...
Could not chdir to home directory 99: No such file or directory
And then it just dumps me into the root of the server I'm trying to connect to.
How should I go about dealing with this? Since I don't have a local home directory on any of these servers, it has no where to put me. I tried enabling/using a network home folder, but I end up with the same issue. Since the volume/location designated as my home folder isn't mounted on the servers I'm trying to connect to (and since logging in via SSH doesn't auto-mount the share point like AFP would if I was actually logging into OS X via the GUI), it again says it can't find my home directory and dumps me into the root the server I've logged in to.
If anyone could lend some advice on how to properly set this up, it would be much appreciated!
Thanks,
Kristin.

Should logging in via SSH auto-mount the share point?
Yes, of course, but only if you've set it up that way.
What you need to do is designate one of the servers as being the repository of home directories. You do this by simply setting up an AFP sharepoint on that server (using Server Admin) and checking the 'enable user home directories' option.
Then you go to Workgroup Manager and select your account. Under the Home tab you'll see the options for where this user's home directory is. It'll currently say 'None' (indicating a local home directory on each server). Just change this to select the recently-created sharepoint from above.
Save the account and you're done. When you login each server will recognize that your home directory is stored on a network volume and will automatically mount that home directory for you.

[SOLVED] how to enable ssh access to new user

Similar Messages

Maybe you are looking for