[SOLVED] Install Arch Linux on USB Stick!

So, here is the deal. I want to install Arch Linux on a USB Stick so I can plug it at any computer and have my system... with me
I've had a little bit experience with Arch so I know a few things about it... used it for a few months before on a real system.
My USB stick is a HighSpeed 17-20 MBPS and it's 16 GB capacity.
So how do I do it?
Last edited by 1lj4z1 (2012-04-05 07:25:53)

I'm using occasionally Arch installed on HDD-USB, I've just added usb hook to mkinitcpio.conf and removed autodetect (more modules=more hardware supported). So far it worked on 3 different computers (all of them have one main HDD so no grub issues, but it's no biggie if it doesn't boot right away, you can always edit grub on-the-fly by pressing "e")
About USB stick: installing on USB stick is not the same as running it in LIVE mode! Consider yourself warned.
If you just install it you really should read about SSD optimizations because USB flash cells also have limited read/write cycles (actually is less robust and sophisticated than SSD). Something to look at: noatime mount option, disable swap if not necessary, profile-sync-daemon and so on...
1lj4z1 wrote:Well I don't need to chroot, i am running it live. I'll see about mkinitcpio.conf but I can't understand what you mean rebuilding initramfs? What is that exactcly?
It means if you fiddle with mkinitcpio you should run:
# mkinitcpio -p linux
afterwards or bad things will happen
Last edited by masteryod (2012-03-27 15:37:13)

Similar Messages

Having trouble installing Arch Linux to USB key

Hello,
I have read the wiki article, but it doesn't answer my question. I am having trouble installing Arch to a USB key (8GB Sandisk Cruzer). I installled GRUB correctly, it booted, but the flash drive was write-protected. In the fstab file, I have the defaults and noatime flags in there. I have never experienced an error like this, and I don't know how to fix it. I have tried to reboot into the Arch CD and mounted the USB, but it just stalls and displays no output. Obviously, if I boot into my USB (you can still boot into it), and do "nano /etc/fstab", it says that I cannot write. In case you were wondering, I am using the root user. Thank you for all your help!
EDIT: I have Syslinux, the kernel parameters is RW. If I run mount -o remount,rw /dev/sda1, it tells me something like:
ata3.00: status: {DRDY ERR}
ata3.00: error: {IDNF}
end_request: I/O error, dev sda, sector 21
Buffer I/o error on device sda1, logical block 0
EXT4-fs error (device sda1): ext4_remount:4665: Abort forced by user
I did NOT hit CTRL+C.
Last edited by aqua123 (2013-09-07 02:01:30)

I'm a nub, and I think I'll piggy back of aqua's post. Perhaps we have the same problem
I have an Asus UX31A with Xubuntu (with grub) currently installed. I created the bootable USB as per the Arch Wiki UEFI bootable usb page. I can boot into the main prompt where you can choose "Arch Linux Iso", "shell v1", "shell v2" and "Default prompt."
Choosing the first option (to get to the the command prompt and begin installing) makes the screen flash once, then just hangs black. Before the flash I think I see three text lines in the upper left corner, but they flash so fast I can't read them.
Choosing either of the shell options presents the error:
"Error loading \EFI\shellx64_v1.efi: Unsupported" (replace "v1" with "v2" for the other option)
Any thoughts?

[SOLVED] Installing arch linux using dd from anrdoid phone's sd card

Hello everybody, I'm totally new and totally excited about arch linux.
I'm trying to create a bootable android phone for some hours now with no success.
The reason I'm trying to do that, is because all my usb sticks are all over the place at friends houses.
Since I'm not the patient type, I decided to do it with my Android Phone's SD card cause I noticed that I have the option to boot from it during startup.
Now, what seems to be the problem is this:
I did "dd bs=4M if=/path/to/archlinux.iso of=/dev/sdc" which seemed to do the job. When I rebooted tho, I didn't see my phone as a booting option.
That was obviously due to unrecognized file system format. How can I dd and keep the filesystem type? I believe that it's ntfs or FAT.
I also tried to install without overwriting the stick, which was a failure, it said it wouldn't find the .cfg files when i ran the commands in the wiki.
Can somebody help me with this?
Thanks in advance
Last edited by deus_deceit (2013-02-10 02:13:12)

Yes, my phone's card works without adding software as soon as I plug it in, the problem appears to be this: when i do "dd" on the SD card the filesystem type changes which causes my phone thinking that the SD card is empty since it doesn't recognize that format and not showing as a bootable device. As soon as I format it with my phone and reboot, it's there. So what I want to do is, create a bootable SD card that keeps the filesystem format that my phone recognizes. Is that possible?
Last edited by deus_deceit (2013-02-10 00:58:54)

Installing Arch Linux on USB key: error while booting

Hello,
first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
Waiting 10 seconds for device /dev/sdc/
Root device '/dev/sdc' doesn't exist. Attempting to create it.
ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
/bin/sh: Can't contact tty; job control turned off
[ramfs /]#
To summarize I'll show you my conf files that could help you to resolve my problem:
/etc/fstab.conf
/dev/sdc1 /boot ext2 defaults 0 1
/dev/sdc2 / ext3 defaults 0 1
/dev/sdc3 /home ext3 defaults 0 1
So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
/etc/mkinitcpio.conf
HOOKS="base udev usb autodetect pata scsi sata filesystems"
I've added to here, "usb" to the hooks
installed GRUB on my sdc, here is the menu.ist:
# (0) Arch Linux
title Arch Linux (USB)
root (hd0,0)
kernel /vmlinuz26 root=/dev/sdc ro vga=773
initrd /kernel26.img
So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

1. What I did is re-installing entirely from my installation disk or USB to test out different setting in my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
2. Yes, same error.
3. Tested out by-id/by-path and uuid = no difference
4. Didn't know about larch, it seems to be a nice tool, I'll check it out

I'm on W7. How do I install Arch on a usb stick via Virtualbox?

I want to make a bootable USB arch install I use on computers i don't trust and other such case scenarios.
I get internet from my phone via wlan so i need to use Virtualbox to take andantage of it.

https://wiki.archlinux.org/index.php/Mo … al_machine
Leave out the autodetect hook from mkinitcpio.conf, which tailors your initramfs to the specific hardware.
And maybe also use plain old vesa, instead of a specific video driver.

Booting Arch Linux from usb flash [SOLVED]

I have instaled Arch Linux on usb flash (filesystem is ext2) I have regenerated initrd (mkinitcpio -p) with usb hook (HOOKS="base udev usb ide scsi sata filesystems"), but Arch Linux stop booting with error: unable mount dev/disk/by-uuid/my-uuid After pressing Control-D in recovery shell Caps Lock and Scroll Lock leds blink on my keyboard
I have tried booting from label (dev/disk/by-label/my-label) I have got same error
Please help me
PS Please forgive me for my English
Last edited by vav (2011-02-13 12:42:59)

GRUB is installed on the usb flash drive
menu.lst:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd2,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/1e3753e6-01f4-4153-a36a-07a81c552ee0 ro
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd2,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/1e3753e6-01f4-4153-a36a-07a81c552ee0 ro
initrd /boot/kernel26-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by vav (2011-02-13 08:06:27)

[Solved] Boot process hangs for installed Arch and installation usb

Hi. I've been using Arch Linux for around 6 months now and I'm in love with it. It is now my primary OS. However, I might have done something or performed some update, and I can no longer boot into Arch. The boot process hangs right before it should show the login screen (I'm using Gnome 3.6 with GDM). I see the following messages on the screen:
Loading Linux core repo kernel ...
Loading initial ramdisk ...
/dev/sda3: recovering journal
/dev/sda3: clean, 330610/1749664 files, 5585671/6996827 blocks
And then it hangs right there. I have to hard-reboot after this.
I then tried to boot using the Arch Linux Installation USB (archlinux-2012.12.01-dual.img), which also hangs at a particular point, before it should show me the prompt. I took a picture of the screen where it hangs: Screen Capture. This is an issue with just my laptop, because the USB boots just fine on another laptop I tried.
I also have Windows 7 and Ubuntu 12.10 installed on my system, and I'm able to boot into both of them.
I have 2 hard drives: /dev/sda is a 120GB SSD, and /dev/sdb is a 500GB hard disk. My partitions are as follows:
sda1 - Windows 7 100MB System Reserved Partition (boot flag enabled)
sda2 - Windows 7 OS
sda3 - ArchLinux (boot flag enabled)
sdb1 - Ubuntu 12.10 (boot flag enabled)
sdb2 - Just data
I ran bootinfoscript and below is the output:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 99 for .
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 99 for .
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Mounting failed: mount: /dev/sda3 already mounted or sda3 busy
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.10
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 178,466,084 178,259,237 7 NTFS / exFAT / HPFS
/dev/sda3 * 178,466,085 234,440,703 55,974,619 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 20,948,759 20,948,697 83 Linux
/dev/sdb2 20,964,824 976,771,071 955,806,248 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/mmcblk0p1 6665-3162 vfat
/dev/sda1 CA6A20CC6A20B75B ntfs System Reserved
/dev/sda2 1EE242D5E242B137 ntfs
/dev/sda3 65db0c59-9f04-46f1-975d-8a4c28132137 ext4
/dev/sdb1 bb9818db-ce7c-43a4-8ad5-8d3702001aed ext4
/dev/sdb2 3C2E3A4E2E3A0206 ntfs
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/mmcblk0p1 /media/dhaval/6665-3162 vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sdb1 / ext4 (rw,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 13,37,73; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro quiet splash acpi_osi=Linux acpi_backlight=vendor $vt_handoff
initrd /boot/initrd.img-3.5.0-21-generic
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
menuentry 'Ubuntu, with Linux 3.5.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-21-generic-advanced-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.5.0-21-generic ...'
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro quiet splash acpi_osi=Linux acpi_backlight=vendor $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-21-generic
menuentry 'Ubuntu, with Linux 3.5.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-21-generic-recovery-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.5.0-21-generic ...'
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-21-generic
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-29-generic-advanced-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro quiet splash acpi_osi=Linux acpi_backlight=vendor $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-29-generic-recovery-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
linux16 /boot/memtest86+.bin
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-CA6A20CC6A20B75B' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 CA6A20CC6A20B75B
else
search --no-floppy --fs-uuid --set=root CA6A20CC6A20B75B
fi
chainloader +1
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sdb1/etc/fstab: ================================
# /etc/fstab: static file system information.
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed / ext4 errors=remount-ro 0 1
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
4.564525127 = 4.901121536 boot/grub/grub.cfg 1
5.130507946 = 5.508840960 boot/initrd.img-3.2.0-29-generic 2
5.851592541 = 6.283099648 boot/initrd.img-3.5.0-21-generic 2
6.317649364 = 6.783524352 boot/vmlinuz-3.2.0-29-generic 1
4.965751171 = 5.331934720 boot/vmlinuz-3.5.0-21-generic 2
5.851592541 = 6.283099648 initrd.img 2
5.851592541 = 6.283099648 initrd.img.old 2
4.965751171 = 5.331934720 vmlinuz 2
4.965751171 = 5.331934720 vmlinuz.old 2
I tried adding nomodeset and acpi=off to the boot parameters, but the boot process still hangs. Please let me know if I should provide any other information.
Last edited by dhavalparmar (2012-12-30 11:45:25)

Ok.. So my Arch Linux randomly decided to work. I'm sure I didn't do anything between my last "not working" state and my current "working" state. Below are a few things I tried:
I thought of trying an earlier build of ArchLinux, and downloaded archlinux-2012.11.01-dual.iso and made a bootable USB out of it. It still hung.
I was getting error messages during Arch boot that the last access time for the disks was at a future date. I found out that Ubuntu was using localtime instead of UTC and screwing up my hardware clock. I fixed it, and thought maybe the time issues were causing the boot problem. But fixing time didn't solve my problem.
I chrooted into Arch from my Ubuntu install, ran 'sudo pacman -Syyu' and updated my Arch install.
I thought maybe GDM isn't starting up. I re-enabled the service using 'systemctl enable gdm.service'.
I removed OpenNTPd and installed NTPd. Enabled the daemon using 'systemctl enable ntpd'
None of the above solved the problem, and rebooting to Arch still hung the system. So I stopped fiddling with it yesterday. Today, as usual, I just tried logging into Arch.. And it just worked out of the blue. The solution to me is as mysterious as the problem.
I told this to my friend who introduced me to Arch, and this is what he said:
Damn it computers, you were supposed to be deterministic!

Is it suitable install Arch Linux on a USB key?

I want to install Arch Linux on a USB key following the wiki https://wiki.archlinux.org/index.php/In … _a_USB_key
But I now heard that Arch Linux will be very very slow than LiveUSB because of USB's bad I/O speed. Is it real?
Forgive my poor English, thank you!

Actually I spent some times to study USB, and I concluded out that it is relate with USB's performance, as example, USB 3.0 is better than USB 2.0, SLC is better than MLC.
So the better performance of USB the more suitable to install Arch Linux. However, it will costs me much money to buy expensive USB:)
@Mr Green What's your blog? Is this http://archbang.org/?

How to partition a USB flash-drive to install Arch Linux?

Good afternoon,
Could anyone please guide me in the right direction, how would I go about partitioning my USB flash-drive in order to install Arch Linux onto my Acer Aspire One? I've found guides, but none of them are specific enough - the static assumption being that the OS is already partitioned onto your flash-drive, and that is not the case for me.
Much appreciated,
A Swiftly Tilting Planet

assuming your usb key is /dev/sdz
# dd if=/dev/zero of=/dev/sdz
//cleans the usb drive
# fdisk /dev/sdz
// press m and read the help, make a partition, make it bootable
// you have to press (double check anyway):
// n, p, 1, <enter>, <enter>, a, 1, t, b, w
# mkfs.vfat /dev/sdz1
// formatting
The first passage can actually replaced to something more modest, like:
# dd if=/dev/zero of=/dev/sdz bs=1024 count=1
Last edited by ezzetabi (2009-01-03 16:37:04)

[HOWTO] Installing Arch Linux stable release on Acer Aspire One 522

[This is a work on progress and my first howto ever]
These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
This Howto borns with the intention to address this problem.
You need to be familiarized with Linux internals to follow this howto.
(Expect this howto to become useless with new stable releases of ArchLinux.)
Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
Just boot with systemrescuecd
Mount your external harddisk on /mnt/floppy for example
Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
Result image was about 22GB size
This image will restore partition table, boot sector and all data if things go wrong.
I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
If you have some Gentoo Linux experience you will find those steps really familiar.
You will need 2 USB pendrives or similar storage options.
One is needed to boot into your netbook, and the other to store our custom archlinux build.
Making an updated ArchLinux system
1) Make a local dir on your existing linux system
# mkdir ./newarch
2) Install pacman database on it
# pacman -Sy -r ./newarch
3) Install base system
# pacman -S base -r ./newarch
4) Let's chroot inside
# cp /etc/resolv.conf ./newarch/etc/
# cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
# mount -t proc proc ./newarch/proc
# mount -t sysfs sys ./newarch/sys
# mount -o bind /dev ./newarch/dev
# chroot ./newarch /bin/bash
5) Edit configuration files
# nano -w /etc/rc.conf
# nano -w /etc/hosts
# nano -w /etc/mkinitcpio.conf
Forget /etc/fstab for now since you don't know what partitions to use yet
6) Generate kernel image
# mkinitcpio -p kernel26
7) Generate locales
# nano -w /etc/locale.gen
# locale-gen
8) Make a tarball with our custom ArchLinux
# exit
# umount ./newarch/proc
# umount ./newarch/dev
# umount ./newarch/sys
# tar -cvpf newarch.tar ./newarch
9) Copy this tarball to an USB pendrive or external harddisk
10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
You should be booting into SystemRescueCD without any problem.
After initialization you will end in a root prompt.
11) Let's partition the disk
You will find 3 partitions if this is your first time:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
You have plenty of space with sda3, about 230G.
So run fdisk/cfdisk and delete /dev/sda3
Now create a 100M partition for boot
Now create a Extended partition with all the space left
Now create a 1GB logical partition for swap
Now create a 10-15 GB logical partition for root system
And finally a logical partition for our home partition with all space left
Your partition table should look like this:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 29771775 102400 83 Linux
/dev/sda4 29771776 488397167 229312696 5 Extended
/dev/sda5 29773824 31821823 1024000 83 Linux
/dev/sda6 31823872 63281151 15728640 83 Linux
/dev/sda7 63283200 488397167 212556984 83 Linux
12) Create filesystems
I choosed ext2 for boot, and reiserfs for root and home partitions.
# mke2fs /dev/sda3
# mkreiserfs /dev/sda6
# mkreiserfs /dev/sda7
# mkswap /dev/sda5
13) Mount partitions
# mkdir arch
# mount /dev/sda6 arch
# mkdir arch/boot
# mount /dev/sda3 arch/boot
# mkdir arch/home
# mount /dev/sda7 arch/home
14) Copy our custom ArchLinux build on it
# mount /dev/sdb1 /mnt/floppy (for example)
# cd arch
# tar -xvpf /mnt/flopy/newarch.tar
15) Configure /etc/fstab
Mine is as follows:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda3 /boot ext2 defaults 0 1
/dev/sda6 / reiserfs defaults 0 1
/dev/sda7 /home reiserfs defaults 0 1
/dev/sda5 swap swap defaults 0 0
16) Chroot in your new system
# mount -t proc proc ./proc
# mount -t sysfs sys ./sys
# mount -o bind /dev ./dev
# chroot ./ /bin/bash
17) Install grub
# grub-install
Edit /boot/grub/menu.lst to suit your needs
Mine looks like this:
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26.img
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26-fallback.img
title Windows 7 Recovery
rootnoverify (hd0,0)
makeactive
chainloader +1
As you see, you can restore Windows 7 Starter from Grub.
18) Change root password
# passwd
19) Add a regular user account
# useradd -G video,audio,users -m username
# passwd username
20) You're done!
# exit
# cd ..
# umount ./arch/proc
# umount ./arch/dev
# umount ./arch/sys
# umount ./arch/boot
# umount ./arch/
# reboot
Remove the usb stick from your netbook.
If all went ok, you will be inside your new stable and updated ArchLinux system
Next post is reserved for software configurations specific to the Acer Aspire One 522
Last edited by tigrezno (2011-04-20 12:22:38)

Using acpid to achieve the following:
- Change screen brightness when operating in battery mode
- Power off when the power button is pressed
- Suspend when the lid is down
- Reduce CPU frequency speed to maximize battery usage
Remember that system suspend is only supported by ati free driver xf86-video-ati
1) Install acpid daemon and cpufrequtils
# pacman -S apcid cpufrequtils
2) edit acpid handler script
# nano -w /etc/acpi/handler.sh
Change the following section:
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
for:
ac_adapter)
case "$2" in
ACAD)
case "$4" in
00000000)
echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 800Mhz
cpufreq-set -c 1 -f 800Mhz
00000001)
echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 1000Mhz
cpufreq-set -c 1 -f 1000Mhz
esac
*) logger "ACPI action undefined: $2" ;;
esac
Make sure you changed AC) for ACAD)
Now change this other section:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
with:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) poweroff ;;
*) logger "ACPI action undefined: $2" ;;
esac
Change:
button/lid)
#echo "LID switched!">/dev/tty5
logger "ACPI group/action undefined: $1 / $2"
for:
button/lid)
pm-suspend && /etc/rc.d/network restart
logger "ACPI group/action undefined: $1 / $2"
Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
3) Start acpid and load modules
# modprobe powernow-k8
# /etc/rc.d/acpid start
Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
Stopping system freezes due to ethernet driver
The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
MODULES=(!ath9k !atl1c)
Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
Correctly starting wireless at boot
I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
wi_up()
eval iwcfg="\$wlan_${1}"
[[ ! $iwcfg ]] && return 0
/usr/sbin/iwconfig $iwcfg
[[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
sleep $WIRELESS_TIMEOUT
/usr/sbin/iwconfig $iwcfg
bssid=$(iwgetid $1 -ra)
It will do the trick and will start at boot correctly. This is not a solution but a fix.
Adjust Touchpad to disable false taps
What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
This means you can write and press space without having the cursor click out of the window and such.
# synclient AreaLeftEdge=150
# synclient AreaRightEdge=1300
# synclient AreaTopEdge=300
Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "AreaTopEdge" "300"
Option "AreaLeftEdge" "150"
Option "AreaRightEdge" "1300"
EndSection
You can play with those values. They just work for me.
Last edited by tigrezno (2011-04-23 13:49:48)

Installing Arch Linux after Windows 7 64bit dual boot

Total noob here ^^
Im trying to install Arch Linux after my installation of Windows 7, without fucking up that one...
I freed up 50GB and removed it from my Windows boot partition, so Arch can be installed there, I have almost absolutely no experience with this kind of stuff since I've only used Ubuntu and Kali Linux before.
I've got a working arch image on my usb stick and i somehow can't figure out, how to install it without touching the existing partitions.
Is it possible to create a working dual boot, without changing my windows configuration?

yes its possible. What research have you done in order to install Arch. We do not hand hold here in this community. Go read up the appropriate wiki pages and ask specific questions with details in case you get stuck.
Start with the Beginners Guide.

Keyboard and mouse not working when installing arch linux 2014.01.05

trying to install arch linux 2014.01.05 dual iso but when I boot the live cd my keyboard and mouse (both wired) arent detected.
please help

I am from australia > melbourne victoria and usually type in english us or english australian (which keymap do I use in the arch linux install process?) arch linux still does not detect my kb and mouse when on desktop (usb keyboard)...stumped.
Last edited by yoshiserry (2014-01-27 07:44:05)

Recovering earlier installed Windows 7 after installing Arch Linux

I'm trying to boot windows on my ASUS notebook.
There was windows 7 from the very beginning (disks C:\ and D:\), then I divided disk D:\ on several partitions and installed Arch Linux. I overwrited Windows boot information by boot part of Linux. Now I want to recover windows, that I still have on hard drive. It doesn's matter what there will be: dualboot or only windows (but dualboot is prefered).
Disk info:
[jhon@fckrsns ~]$ sudo fdisk -l
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 1AFC9DFF-CD3B-4CE1-8CAF-41C3E5B75772
Device Start End Size Type
/dev/sda1 2048 411647 200M EFI System
/dev/sda2 411648 673791 128M Microsoft reserved
/dev/sda3 673792 586731519 279.5G Microsoft basic data
/dev/sda4 586731520 691589119 50G Linux filesystem
/dev/sda5 1412718592 1465147391 25G Windows recovery environment
/dev/sda6 691589120 901304319 100G Linux filesystem
/dev/sda7 901304320 1412718591 243.9G Microsoft basic data
[jhon@fckrsns ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 698.7G 0 disk
├─sda1 8:1 0 200M 0 part /boot
├─sda2 8:2 0 128M 0 part
├─sda3 8:3 0 279.5G 0 part
├─sda4 8:4 0 50G 0 part /
├─sda5 8:5 0 25G 0 part
├─sda6 8:6 0 100G 0 part /home
└─sda7 8:7 0 243.9G 0 part
sr0 11:0 1 1024M 0 rom
[jhon@fckrsns ~]$ lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 vfat 4DEB-D6D2 /boot
├─sda2
├─sda3 ntfs OS 62364BE9364BBCB3
├─sda4 ext4 c4da4683-871a-49fa-96a3-4da11387d31d /
├─sda5 ntfs Recovery 8ECE4F50CE4F2FAF
├─sda6 ext4 3eba01c6-e422-4542-8442-16064c74a563 /home
└─sda7 ntfs 3B29E7794F6CD932
sr0
OS partition (/dev/sda3):
[jhon@fckrsns /]$ ls /run/media/jhon/OS
altera Boot djvureader DrWeb Quarantine eSupport hiberfil.sys MSOCache N56VM.BIN pagefile.sys Program Files Recovery SecurityScanner.dll VisualCLibs
AsusVibeData bootmgr Documents and Settings eclipse Games Intel MS.Office.2007.Portable.micro.v.1.16 N56VZ.BIN PerfLogs Program Files (x86) $Recycle.Bin System Volume Information Windows
AVScanner.ini BOOTSECT.BAK DOSBox_SIM END gcc Keil_v5 mtd NVIDIA ProgramData Qt R.G. Catalyst Users
I tried to recover MBR with different ways:
with syslinux:
[jhon@fckrsns /]$ sudo dd if=/usr/lib/syslinux/bios/mbr.bin of=/dev/sda
0+1 records in
0+1 records out
440 bytes (440 B) copied, 0.0226394 s, 19.4 kB/s
with ms-sys:
[jhon@fckrsns /]$ sudo ms-sys --partition /dev/sda1
Start sector 2048 (nr of hidden sectors) successfully written to /dev/sda1
Physical disk drive id 0x80 (C:) successfully written to /dev/sda1
Number of heads (255) successfully written to /dev/sda1
[jhon@fckrsns /]$ sudo ms-sys --mbr7 /dev/sda
Windows 7 master boot record successfully written to /dev/sda
But there is still no way to boot windows.
I run grub-mkconfig before and after these manipulations with MBR:
[jhon@fckrsns ~]$ sudo grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/initramfs-linux.img
Found fallback initramfs image: /boot/initramfs-linux-fallback.img
No volume groups found
done
[jhon@fckrsns /]$ sudo os-prober
/dev/cdrom: open failed: No medium found
No volume groups found
I installed rEFInd, now I have two choices on boot screen: vmlinuz-linux, which it founded, and my earlier installed grub bootloader.
Maybe I missed something, but i don't know what exactly.
Last edited by Jhon (2014-09-28 16:45:38)

Now I know that I don't need MBR at all (but google told me that recovering windows = recovering MBR..)
Are there any ways to recover boot information on EFI system partition from Linux without using Windows Live CD and it's bootrec.exe?
I have bootmgr and bootmgfw.efi files on /dev/sda3 (partition with windows installed), what else I need? Simple copy of bootmgfw.efi to /boot/EFI/Microsoft/Boot/bootmgfw.efi and addition of custom menu item to /etc/grub.d/40_custom does'nt work. There is Windows now in rEFInd and GRUB menus, but there is error on loading.

Failure to install Arch Linux via netinstall AIF; PGP key issues

Hello,
I'm am attempting a fresh install Arch Linux on a clean machine: Dell 1420, 4GB RAM. I am using the archlinux-2012.02.09_04-00-01-netinstall-dual.iso installer.
Installation progresses nicely through the package selection (I choose core, core-dev, xfce, and xorg packages only, to keep it simple for now). The packages download quickly, and then the installation fails during installation indicating that none of the PGP keys are known for any of the downloaded files. The process essentially aborts and I press 'Continue' returning me to the main menu. I have repeated this process several times.
What needs to be done to install Arch Linux?
Thanks.

Hi,
Thanks, I have been through the Beginners Guide. I just want to get Arch Linux to "start" with a very basic GUI. during one of my installation iterations I did install only 'core' files, but the same failure occurred. so I'm at a loss as to how to get even a basic installation to take hold. Thoughts on the pgp key issues?
Thanks.
Update: I've switched to using the default net installer (2011.08.19) and the installation succeeded!
Last edited by zaleksf (2012-02-12 05:12:32)

Archwiz Script for installing Arch Linux

I created a new Bash Script Project called Archwiz, located on github flesh/archwiz ,
its still in Beta for a few reasons, I never figured out how to get computer translations working in the script so I can Localize it, and I never figured out all the details to get an AUR custom repo working and lastly I didn't get the Asynchronous downloads to work right, so there are all disabled in this script.
This script was a fork of another script found here Archlinux Ultimate Install Script.
The Script itself has several files, the wizard.sh is a library, that allow programmers to use this library as an API for writing scripts, so its usefully to anyone that wants an API to write Bash Scripts, but the script itself scripts a script that is saved as configuration files, then executes the script inside itself, so you can look at all the configuration files before running it.
The script was written for use by anyone, but mostly targets programmers like myself who need to setup a machine to use as a work station and want it set up a certain way every time, although this script is far from finished, I have a lot of tweaking to do to it before it would be completely there, but as it is, I can get up and running on a machine with little effort, so this make it ideal for a Linux Administrator who has to install thousands of OS's and have them configured all the same way, but works great for someone just wanting to install Arch Linux.
The Project is Self Documenting and Self Localizing, although currently only English works, but the po files are there, so it would be easy enough if you wanted to localize it; but the computer translation function I started would be the correct way to do this.
The scripts makes use of a custom repo, so remove it when finished, the script should do this for you, but just to let you know, it downloads the core to the flash drive, this way it can install very fast, once you install it one, it has all the files on it to install on another computer without an Internet connection, well at least that was my thinking, I never did get the AUR custom repo to work, but the idea is to have all the files on the flash so you do not need to use up bandwidth installing Arch Linux on a new machine, just install it, then run pacman updates.
The Idea of a Wizard is to make the life of those installing an OS, much easier, they have the Option to do a Custom install, or a Wizard install, even an Automatic install to pre-configure machines.
The script determines if you have UEFI Bios or not, and formats and configures the Hard Drive correctly, and gives you full control over the partitioning of the drive, within the bounds of the tools used, so its very flexible, it uses systemd, so boot time on my machine is 10 seconds flat, and that's because I mount a lot of network drives and map them at boot time, I got 2 seconds boot time with mounting, so the packages are not perfect, but they do work.
I only tested GDM, since I installed every Desktop Manager and configuration for my needs, this was the only one I got to work for all of them, but I normally use KDE or Mate, but I ran into issues with Mate and went back to KDE, so I could get back to work.
This script was designed to Format the Drive you install it to, so do not use this on a Partitioned Drive, it will format the hard drive, so you are warned once more during the install, but this could be fixed, I had to abandon the project to finish another, so the script is as it is, but could give someone a great start if they want to folk it and finish it, so fork me.
See the help.html for details.
Last edited by Flesh (2013-02-28 00:31:54)

Moving to Community Contributions...

[SOLVED] Install Arch Linux on USB Stick!

Similar Messages

Maybe you are looking for