[solved] OpenOffice's spellcheck doesn't seem to check spelling.
Having a bit of a problem with this, folks. I set the language, but when I hit F7 it simply tells me that the spellcheck is complete. I know for a fact that a lot of the words are spelled wrong (I put gibberish in to test it), and still nothing. What gives?
Last edited by SomeGuyDude (2008-11-10 06:49:05)
peart wrote:You probably have to install the appropriate dictionary extension. see http://wiki.archlinux.org/index.php/Openoffice
In the "Extension management and spell checking for OpenOffice 3.x" section.
Ah, there we go.
That's a little odd, all the dictionaries are in the directory, but nothing's "installed"?
Similar Messages
-
[solved] fancontrol - fan speed doesn't seem to change after boot
I used fancontrol to control my fan but after I rebooted it doesn't seem to speed up the fan when it hits MAXTEMP whereas it did before I rebooted.
Before the boot I set the CPU governer to performance (3.1Ghz) to heat up the cpu to test the fan cooling (using lm_sensors) and when it hit around 65c the fan got faster and cooled it adequately but after reboot the temp has gone right up to 90c and the fan doesn't even sound like it has sped up.
I have the AMD 8120fx 8 core CPU which is set to default/stock clocks in bios.
cat /etc/fancontrol
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon2=devices/platform/nct6775.656
DEVNAME=hwmon2=nct6776
FCTEMPS=hwmon2/pwm2=hwmon2/temp9_input
FCFANS=hwmon2/pwm2=hwmon2/fan2_input
MINTEMP=hwmon2/pwm2=20
MAXTEMP=hwmon2/pwm2=65
MINSTART=hwmon2/pwm2=150
MINSTOP=hwmon2/pwm2=0
sudo systemctl status fancontrol -l
fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; enabled)
Active: active (running) since Tue 2014-03-04 17:11:13 GMT; 17min ago
Main PID: 31561 (fancontrol)
CGroup: /system.slice/fancontrol.service
|- 8347 sleep 10
`-31561 /bin/bash /usr/sbin/fancontrol
Mar 04 17:11:13 myhost fancontrol[31561]: Depends on hwmon2/temp9_input
Mar 04 17:11:13 myhost fancontrol[31561]: Controls hwmon2/fan2_input
Mar 04 17:11:13 myhost fancontrol[31561]: MINTEMP=20
Mar 04 17:11:13 myhost fancontrol[31561]: MAXTEMP=65
Mar 04 17:11:13 myhost fancontrol[31561]: MINSTART=150
Mar 04 17:11:13 myhost fancontrol[31561]: MINSTOP=0
Mar 04 17:11:13 myhost fancontrol[31561]: MINPWM=0
Mar 04 17:11:13 myhost fancontrol[31561]: MAXPWM=255
Mar 04 17:11:13 myhost fancontrol[31561]: Enabling PWM on fans...
Mar 04 17:11:13 myhost fancontrol[31561]: Starting automatic fan control...
Any help would be appreciated, thanks.
Last edited by pluckypigeon (2014-03-05 12:01:00)Algernop wrote:Have you implemented this by through the lm_sensors.service? This has been known to introduce boot-to-boot inconsistencies.
Thank you for your response. I did have the lm_sensors.service problem before but not when I had this problem (I solved that by adding the modules created by sensors_detect to a module-load.d file.)
The problem (I think) came from trying to fix the boot-to-boot inconsistencies (caused by lm_sensors.service). What I did was blacklist my k10temp module and that stopped a device from being detected. Then, when I generated the configuration file it didn't add the device.
Below is my new configuration file, where you can see the device(hwmon1) is now in it.
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon2=devices/platform/nct6775.656 hwmon1=devices/pci0000:00/0000:00:18.3
DEVNAME=hwmon2=nct6776 hwmon1=k10temp
FCTEMPS= hwmon2/pwm2=hwmon1/device/temp1_input
FCFANS= hwmon2/pwm2=hwmon2/fan2_input
MINTEMP= hwmon2/pwm2=20
MAXTEMP= hwmon2/pwm2=65
MINSTART= hwmon2/pwm2=150
MINSTOP= hwmon2/pwm2=0 -
[SOLVED] Mpd and sonata doesn't seem to work
Hi guys!
I 'm facing with an issue . I can't seem to configure mpd correctly to run it with sonata .
I've followed the alternative setup from archwiki and this is my config file .
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/andreas/Downloads/Torrents"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/home/andreas/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/home/andreas/.mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/home/andreas/.mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/home/andreas/.mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/home/andreas/.mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "andreas"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## format "44100:16:2" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
All the files required are in my /home/andreas/.mpd/ directory
config
mpd.db
mpd.error
mpd.log
mpd.pid
mpdstate
playlists
I've also added to my .xinitrc file
mpd /home/andreas/.mpd/config
I 'm sure i've done something wrong but don't know what it is . If anyone could help me out i would be grateful
THanks a for all your help!
Last edited by shak (2010-04-19 23:08:09)shak wrote:
I've followed the first method with the mpd daemon and everything worked fine .
THanks for all your help everyone !
The add of MPD : ALL to hosts.allow seems to solved it .
Thanks again!
Nice.
Please mark threads as [SOLVED] when they are. You can do so by editing the opening post. -
LR5 's Adjustment Brush doesn't seem to work-does the New Radial Filter have priority?
So why in the world would I update Lightroom in the middle of a job.?
Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT touching I have always used the the adjustment brush?
Is there a setting or am I missing something or is this a bug?The presence of the Radial Filter in the tool set should have no effect on the Brush. It continues to work just as it always has. In fact, even if the RF is open (I sometimes hit it by mistake when I really want the Brush) and you click on the Brush icon, the RF closes and the Brush opens. If your Brush is not functioning properly, it is very unlikely that the RF is the reason. The usual first aid for any LR misbehavior is to close LR, remove the Preferences file from its folder and relaunch LR, allowing it to make a new preferences file. Not guaranteed to solve the problem, but worth trying.
-
Saving tabs doesn't seem to work anymore for me in 4.0.1
Since I've installed FireFox 4.0.1 the saving of tabs doesn't seem to work anymore. When I press exit I only receive the notification "are you sure you want to close x tabs?". When firefox or my computer crashes the tabs are saved, but when I try to exit myself I can't. Can someone tell me how to solve this?
Hi, I have a similar problem. When playing music, the screensaver has stopped working. Instead all I get is a white screen. I have checked all the settings and they are ok. The photos show and the albums show will work. But as soon as I switch back to slideshow I get the white screen back. It is even like this in 'Preview'.
Have you solved the problem now. If so, how?
Anyone else affected? I took a new software update to the Apple TV two days ago. Could this be the problem?
all advice welcome
regards
Michael -
My iPhone 5 randomly shutdown and rebooting doesn't seem to work for me, what should I do?
It also happens when I'm charging my phone, and also the battery percentage doesn't show that correct battery level not unless I turn off and on.. I tried rebooting the phone but it doesn't seem to work for me, random shutdown still happens..
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service. -
Dnscmd's OpenAcl option doesn't seem to change DNS record permissions
I'm creating DNS A records with dnscmd /recordadd, and I can't see a difference in the A record's permissions whether I use the OpenAcl option or not. Is this normal?
I was expecting with OpenAcl to see permissions similar to Write permissions for Authenticated Users or something. Instead I can't see any difference in the permissions at all and the permissions for non-admins are Read permissions for Everyone.
The DCs run win 2008 R2 SP1. The syntax I've been using for dnscmd.exe is:
dnscmd /recordadd mydomain.com mycomputer /aging /openacl A 192.168.0.123
I want to migrate from Infoblox DNS to AD-integrated. So I'm expecting to export to csv from Infoblox, reformat the csv file a bit and use dnscmd.exe to read the reformatted csv and create DNS records in AD. I'll also enable the option on the Windows computers
to register their DNS records.
I think that the records that dnscmd.exe creates in AD won't have permissions that allow the Windows computers to overwrite them unless I use the OpenAcl option. But OpenAcl doesn't seem to make any difference to the permissions. Very confusing! Thanks for
any help.Thanks Kumar and sorry for replying so late. What you said is correct and what solved my problem was running Windows Update. I was testing using W2K8 R2 with SP1 but no updates after that. After I ran Windows Update, then creating a DNS record using dnsmd.exe
with the /OpenAcl argument did indeed set the permissions on the DNS record so that Authenticated Users could write to it. -
Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!
I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott -
University tech support says their online course system prefers explorer to firefox, and something they and the java download site both say about allowing pop-ups and disabling the firewall make me thing that part of the problem is with firefox's compatibility. But honestly, I don't know. I just know that I'm following all the directions I can find and it doesn't seem to be working.
#Download and SAVE the Java installer to your hard drive,
#*SAVE the installer to your Desktop so that you can easily find it
#exit Firefox (Firefox button > Exit '''''OR''''' File > Exit if using the Menu Bar),
#click or double-click the Java installer that you downloaded to start it
#Using Java with Firefox and Download link: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]
#Test your Java after installation: https://www.java.com/en/download/testjava.jsp
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox] -
Data Detection in Calendar in Mavericks doesn't seem to work anymore.
Since the upgrade to Mavericks, data detection doesn't seem to work anymore.
Before i just typed in a new event:
"Meeting XY at 7pm in Berlin"
and ical would automatically change that to "Meeting XY" and insert the time in the appropriate field and the same for the location.
Now it doesn't work anymore and i have to insert it manually in the different fields.
Anyone with the same problem? and maybe a solution?After searching a bit longer, I found a solution that worked for me. A setting in the CUPS server needed correcting. See this page for instructions: http://www.macintouch.com/readerreports/printing/topic2807.html#d21jul2008
After removing the Deny line indicated in the link above, I removed the printer from the remote computer and then added it back it. Two things happened, first when adding the printer back in, I no longer got the generic postscript printer driver as the default, but got the correct Officejet Driver. Second, It worked! Now to try it with my old 10.4.x powerbook to see if it's solved there too.
Hope that helps!
David
Message was edited by: chopp -
[solved] OpenOffice Writer without password function
Hey there,
I just found out, that my german OpenOffice version of writer (2.3.1) doesn't seem to have the ability to save a document with a password. The help pages tell that the option is supposed to be found under "save as..." and a check box (save with password). But it's not there. A second help entry says, that one can only use a password when saving under the fileextension xml but I hardly doubt that.
Another way I tried was to go to Extras -> Options -> OpenOffice.org -> Security and hit the button at the very end of this tab (secure? It's "schützen" in German) to secure the doc with a password. Unfortunately, after clicking on it and typing in a password (twice), confirming, closing and re-opening the document again, there's no password request and the doc opens just like that (so what is the password for anyway?).
Do I have to tick another option or have I just configured writer wrongly? I am using arch 2.6.23 and installed openoffice from the repository.
I am glad for any help. Thanks for it in advance!
Micha
Last edited by Micha (2008-03-17 14:10:45)Hey, thanks gothmog.todi, I am both happy that it is working and that it wasn't me being stupid! Now I just have to find out who to email for the translation error to get fixed in the next version... If you have a tip, let me know.
Thanks anyway again!
Micha -
[Solved] OpenOffice spell check not working
Used the wiki and did
pacman -S openoffice-spell-XX
but there seems to be no spellcheck. What do I do?
Last edited by ronandi (2008-04-29 20:27:34)Hey,
Probably you need to update your system. Lately Openoffice was broken, because of hunspell: http://bbs.archlinux.org/viewtopic.php?id=47410
Otherwise check your OO.o settings in 'Tools/Options.../Language settings'. -
The iTunes "buy" button doesn't seem to be working. I click it and nothing happens. Anyone know why? Thanks.
Apple made some sort of programming change on 12.26.12 to their iTunes system that suddenly made the Buy button non-functional specifically in the directly-out-of-the-box Snow Leopard (10.6.3). [I had Leopard, same as you, 10.5.8, and that was still working then. I installed Snow Leopard a couple of days ago to my MacBook, and discovered the Buy Button didn't work.
First step: Pull down "Software Update" from the Apple menu (that annoying thing we always ignore.) If you're using Snow Leopard 10.6.3, it'll upgrade you for free to 10.6.8, and that should solve your iTunes problem. (I don't know if there are any upgrades for 10.5.8, but unlike the other ungodly system upgrades, Snow Leopard is only $20. Because Apple is growing increasingly stupid, you can't buy it online--you have to call customer care.)
Hope this helps. Let me know if it does. -
Uninstall doesn't seem to be working...
I've just upgraded to CS5.5 from CS3. I want to uninstall CS3 and have gone to Applications/Utilities/Adobe Installers/ Add or remove CS3... as instructed in other posts. But this doesn't seem to do anything after asking me for my password. Nothing happens. I have looked on the original install disk but can't find a deinastaller. I'm using a Mac Lion 10.7.2. What should I do?
I just solved a CS3 uninstall issue I've been fighting for many days. Like many people with similar problems (in multiple posts I read) my problems began when I tried to migrate my CS3 suite via Mac's Migration Assistant utility to a new system. Apparently this is not the route to go for Adobe apps. After this expereince, I would now recommend deactivate and uninstall and then re-install from disc when possible.
I literally tried to uninstall and re-install 5 times, I then also tried the oft referenced CS Cleaner Tool a couple times and that didn't work either. I researched and stumbled upon an app/utility called AppDelete via:
www.reggieashworth.com/appdelete
I am not associated w/ company, I have nothing to gain: this is a legit, satisfied, (elated) consumer review!
I still had all my apps in Applications following my last install attempt. I purchased the app via site for $7.99. In one fell swoop, I simply grabbed and dragged all my CS apps to the AppDelete 'garbage can'. It listed and found a bunch of 'hidden' files within preferences, library, etc. It listed all associated files, gives you the option of deselecting files/settings, and then quickly removed them.
Really wish I'd found this before about 10+ wasted hours of inserting discs!! -
CustomField doesn't seem to be set
Good morning,
I would like to use CustomField to identify the connected
members. The CustomField doesn't seem to work. I've added some
trace to check:
if (!cSession.userManager.isCustomFieldDefined("memberID")){
cSession.userManager.registerCustomUserField("memberID");
cSession.userManager.setCustomUserField(cSession.userManager.myUserID,
"memberID", myMemberID);
status.text=status.text+" \n setting memberID "+myMemberID;
status.text=status.text+" \n memberID set to
"+cSession.userManager.getUserDescriptor(cSession.userManager.myUserID).customFields.memb erID;
I get the following content in the status field:
setting memberID 123
memberID set to undefined
Am I doing something wrong?
Regards,
AxelHi,
There are some things I would point out and also attach a
code I ran solving your problem.
a) After you set the customField, you need to wait till its
actually set, you need to wait till you receive the
CUSTOM_FIELD_CHANGE event from usermanager ( see my attached code).
b) The way you access a customField is
customFilelds['fieldName'] and not customFields.fieldName
Lastly ,as an added information in the next drop which is
coming in few weeks, we have added ways where you get an event once
you have registered your customFileld so that you wait for it
before setting your customFiled ,and also you would be able to
delete your customField. And you can also do both register and
delete from the dev console.
Here is the complete attached code for your problem
Maybe you are looking for
-
My iphone 4 camera won't focus when taking a picture?
My iphone 4 camera just started acting up this evening. Everytime I try to take a picture the camera will not focus making all of my pictures blurry. What can I do to fix this? Anyone else experience this issue? Should I go ahead and make a genius ap
-
ISight G5 and Third Party Modems
I just received my 20" iMac and transferred over all my files smoothly from the Powerbook. One area that is causing me problem is the dial up modem. I won't have access to broadband until 2006 so I was keen to use my old usb modem in the meanwhile. C
-
RE: We could not complete your iTunes store request. There is not enough memeory available
When Trying to download apps the message 'We could not complete your iTunes store request. There is not enough memeory available. There was an error in the iTunes store. Please try again later' Appears. This message has been appearing since last wee
-
I have bought an used copy of this book: Macromedia® Dreamweaver® 8 with ASP, Coldfusion® and PHP: Training from the Source By Jeffrey Bardzell and the CD-ROM with the example files is broken. Does anybody where can I download the files to follow the
-
I am calling a JavaScript function from a dropdownlistbox onClientSelect attribute. The javascript function dispalys a confirmation pop up with OK and CANCEL buttons. When the user hits OK, the JS function issues htmlbevent.cancelSubmit = false and I