[SOLVED] Pacman issue after -Syu

Hello guys,
This morning I did a full update with "pacman -Syu", before that, I also did an installation for gnome and gnome-extra as well as openoffice. There were some connection loss during the update and perhaps some packages failed to be retrieved, however, I repeated "pacman -Syu" and install the packages again and again until it showed that everything was installed.
But after that, every time I execute the pacman command, I always get the message "error: could not open file /var/lib/pacman/sync/community/chrootuid-1.3-3/desc: No such file or directory", it still shows that "local db is up to date" though, however, it seems like virtualbox isn't installable as "pacman -S virtualbox-ose" returns a "not found" error.
Please give me your solution about this
Thank you
Last edited by Himari (2010-02-23 03:17:07)

Pacman -Syy did the trick, but I also need to change to another mirror as well, I suppose there was something wrong with the previous mirror.
Thank you all for your help

Similar Messages

Does anyone solved wifi issue after ios 6 or 6.1.2 or 6.1.3?

My wifi works intermitently. sometimes it is grayed out, sometimes it is just searching network. I dont know how this issue has come? This all started after ios 6.1.2. and ios 6.1.3 didnt fix it for me. Have done all reset or restoration as a new device but with no success. I think apple is going to bite the dust very soon if this continues. Please note the router is woking fine coz i m running new ipad on ios 6.1.2 and there is no issue with wifi. Should i wait for ios next update or get the wifi module fix.? this is what i was told by one person who does all phone repair work.
Suggest something concrete. i am without wifi since last 1.5 months now. Apple is just ignoring the problem. does anybody solved this issue after multiple software updates ? The problem is my warranty is gone in January itself. and i have purchased this phone from USA and i live in india.

See if this helps
http://support.apple.com/kb/TS1559
if not, it is hardware failure. Apple provides warrantee support for iPhones only in the country of sale.

[Solved] Pacman Issue

After attempting to run the command pacman -Syu, I got this error:
Proceed with installation? [Y/n] y
(60/60) checking package integrity [######################] 100%
error: amsn: signature from "Jaroslav Lichtblau (trusted user) <[email protected]>" is unknown trust
error: libglapi: signature from "Andreas Radke <[email protected]>" is unknown trust
error: libgl: signature from "Andreas Radke <[email protected]>" is unknown trust
error: ati-dri: signature from "Andreas Radke <[email protected]>" is unknown trust
error: bash: signature from "Allan McRae <[email protected]>" is unknown trust
error: util-linux: signature from "Tom Gundersen <[email protected]>" is unknown trust
error: systemd-tools: signature from "Dave Reisner <[email protected]>" is unknown trust
error: bluez: signature from "Tom Gundersen <[email protected]>" is unknown trust
error: libx11: signature from "Andreas Radke <[email protected]>" is unknown trust
error: mesa: signature from "Andreas Radke <[email protected]>" is unknown trust
error: clutter: signature from "Ionut Biru <[email protected]>" is unknown trust
error: clutter-gst: signature from "Ionut Biru <[email protected]>" is unknown trust
error: colord: signature from "Ionut Biru <[email protected]>" is unknown trust
error: consolekit: signature from "Dave Reisner <[email protected]>" is unknown trust
error: device-mapper: signature from "Dave Reisner <[email protected]>" is unknown trust
error: cryptsetup: signature from "Dave Reisner <[email protected]>" is unknown trust
error: db: signature from "Stphane Gaudreault <[email protected]>" is unknown trust
error: e2fsprogs: signature from "Ronald van Haren <[email protected]>" is unknown trust
error: eog-plugins: signature from "Ionut Biru <[email protected]>" is unknown trust
error: gnome-user-docs: signature from "Ionut Biru <[email protected]>" is unknown trust
error: gpm: signature from "Eric Belanger <[email protected]>" is unknown trust
error: gvfs: signature from "Ionut Biru <[email protected]>" is unknown trust
error: gvfs-obexftp: signature from "Ionut Biru <[email protected]>" is unknown trust
error: perl: signature from "Florian Pritz <[email protected]>" is unknown trust
error: vim-runtime: signature from "Thomas Dziedzic <[email protected]>" is unknown trust
error: gvim: signature from "Thomas Dziedzic <[email protected]>" is unknown trust
error: imagemagick: signature from "Eric Belanger <[email protected]>" is unknown trust
error: initscripts: signature from "Tom Gundersen <[email protected]>" is unknown trust
error: intel-dri: signature from "Andreas Radke <[email protected]>" is unknown trust
error: libatasmart: signature from "Ionut Biru <[email protected]>" is unknown trust
error: libcanberra: signature from "Dave Reisner <[email protected]>" is unknown trust
error: libpulse: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: libcanberra-pulse: signature from "Dave Reisner <[email protected]>" is unknown trust
error: libldap: signature from "Stphane Gaudreault <[email protected]>" is unknown trust
error: libpipeline: signature from "Andreas Radke <[email protected]>" is unknown trust
error: libproxy: signature from "Evangelos Foutras <[email protected]>" is unknown trust
error: libsystemd: signature from "Dave Reisner <[email protected]>" is unknown trust
error: libtasn1: signature from "Andreas Radke <[email protected]>" is unknown trust
error: libxaw: signature from "Andreas Radke <[email protected]>" is unknown trust
error: libxft: signature from "Andreas Radke <[email protected]>" is unknown trust
error: lvm2: signature from "Dave Reisner <[email protected]>" is unknown trust
error: mkinitcpio-busybox: signature from "Dave Reisner <[email protected]>" is unknown trust
error: mkinitcpio: signature from "Dave Reisner <[email protected]>" is unknown trust
error: net-snmp: signature from "Evangelos Foutras <[email protected]>" is unknown trust
error: perl-xml-parser: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: pixman: signature from "Andreas Radke <[email protected]>" is unknown trust
error: procps-ng: signature from "Eric Belanger <[email protected]>" is unknown trust
error: pulseaudio: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: run-parts: signature from "Pierre Schmitz <[email protected]>" is unknown trust
error: xcb-util: signature from "Andreas Radke <[email protected]>" is unknown trust
error: startup-notification: signature from "Andreas Radke <[email protected]>" is unknown trust
error: sudo: signature from "Allan McRae <[email protected]>" is unknown trust
error: svga-dri: signature from "Andreas Radke <[email protected]>" is unknown trust
error: udisks: signature from "Ionut Biru <[email protected]>" is unknown trust
error: vte-common: signature from "Ionut Biru <[email protected]>" is unknown trust
error: vte3: signature from "Ionut Biru <[email protected]>" is unknown trust
error: xf86-video-ati: signature from "Andreas Radke <[email protected]>" is unknown trust
error: xf86-video-intel: signature from "Andreas Radke <[email protected]>" is unknown trust
error: xorg-server-common: signature from "Andreas Radke <[email protected]>" is unknown trust
error: xorg-server: signature from "Andreas Radke <[email protected]>" is unknown trust
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I looked around to see if others had the same issues, but none of their solutions worked for me. I do not have a pacman.conf.pacnew file. Here is my pacman.config file:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
#[multilib]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
Any help at all will be greatly appreciated.
EDIT: I realized I misunderstood one of the posts on the forum I saw previously. I fixed the issue by setting SigLevel = Optional TrustAll. I thought it meant only in one place, not each package I'm using. Sorry for the inconvienence.
Last edited by Inxsible (2012-06-04 22:35:26)

Next time, please use [ code ] tags, not [ quote ] tags
like this
https://bbs.archlinux.org/help.php#bbcode
so the code is more readable and longer listing are nicely scrollable.

[Solved] Pacman broke after -Sy error loading liblmza.so.0

so I read in another post that all I hafta do is manually install xz-utils...so I got to AUR and try to makepkg -s after i tar -zxvf the .tar.gz file they provide
I might be missing something or may have not downloaded some extra file I need....anyways it said there was no target specified and no make file found....I'm sure it's fairly obvious that I'm new to linux so any help would be appreciated
i put the .tar.gz into a folder I named xz-util then i cd there and i utarred it with tar -zxvf then i cd into the now utarred file and I type makepkg -s
thanks in advance
Last edited by dangsos (2009-08-06 05:41:11)

dangsos wrote:where can I grab these files from tdy?
Profjim gave you the link above. It is a plain tarball that contains all the necessary files and symlinks.
dangsos wrote:after I updated it then it didn't work....not sure what the deal is, but it sounds the same as the other guys problem that you linked too
oskarn did -Syu (and most likely -Syud as Allan said), which is not -Sy. Since you aren't familiar with the basics of arch/pacman, it's hard to guess what you really did exactly. If you're able to get this all fixed, you'll need to read through some wiki articles to get a basic grasp of things.
Last edited by tdy (2009-08-06 05:15:38)

[Solved] Pacman message after interrupted installation... persists

As you can see I'm still a bit of a newbie. Yesterday I was installing TeX live, but while installing someone unplugged a USB stick and all went stuck... it all just freeze the system, I guess it was a hardware problem. Anyway, I restarted and when I came back to resume the installation (downloading of packages was already finished), pacman sent me a lot of error messages, but apparently TeX live installed fine. Well, I checked my TeX system and works fine. The problem is every time I try to install something, I always get this error message:
error: could not open file /var/lib/pacman/local/texlive-bin-2010.1-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/texlive-bin-2010.1-4/depends: No such file or directory
How do I repair this? I didn't want to clean the cache, but... would this do fine? what else do I have to do?
Thanx in advance.
Last edited by joe74 (2010-10-23 22:33:20)

Well, solved by myself.
What I had to do after a lot of mess was
1. uninstall everything that was causing errors
sudo pacman -Rs texmaker texlive-most texlive-core texlive-bin
2. and clear the cache of files not installed
sudo pacman -Sc texmaker texlive-most texlive-core texlive-bin
This solved the entire problem. Dialectical theory still functioning in my brains

[solved] pacman -Syy and -Syu work, but packages won't install

Hello, everyone. I'm really new to Arch, but I did search all over Google and the forums and couldn't find an answer to this, so I thought I'd ask the forums.
I just installed Arch, and I'm trying to install sudo.
When I run pacman -S sudo, I get:
sudo package not found, searching for group...
error: 'sudo': not found in syncdb
However, when I run pacman -Syy, I get:
::Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from mirrors.kernel.org: File unavailable (e.g., file not found, no access)
...(other similar errors from other mirrors)
core 4.1K 43.7K/s 00:00:00 [##########] 100%
...(same for extra and community)
(Sorry I didn't copy the entire output out, I'm not connected to the internet on the Arch computer, so I'm typing this by hand on another one. I tried a bunch of mirrors earlier, and only one mirror actually works: the Arch one, which as a download cap.)
So my package databases are getting updated, but somehow pacman isn't recognizing them or something.
I updated pacman to see if that would work.
pacman -V
Pacman v3.3.3 - libalpm v4.0.3
It didn't.
I'm running 2.6.33-ARCH according to lib/modules.
I haven't changed my etc/pacman.conf. [core] and its Include, [extra] and its Include, and [community] and its Include are all uncommented. No packages are ignored.
My etc/pacman.d/mirrorlist was updated from the Arch Mirror Generator. I uncommented everything in United States.
I have internet set up, and I've tried taking down wlan0 and putting it back up. iwconfig shows that wlan0 works and is connected, and I'm pinging google.com successfully, so I know internet works.
Thanks in advance for any help, and please let me know if I'm missing any information. I tried to be thorough.
Last edited by bananagranola (2011-08-08 22:20:10)

Wow, that was fast! Thanks!
/etc/pacman.d/mirrorlist:
## Arch Linux repository mirrorlist
## Generated on 2011-08-07
## Any
#Server = [url]ftp://mirrors.kernel.org/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.kernel.org/archlinux/$repo/os/$arch[/url]
## Australia
#Server = [url]ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.internode.on.net/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.internode.on.net/pub/archlinux/$repo/os/$arch[/url]
## Belarus
#Server = [url]ftp://ftp.byfly.by/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.byfly.by/pub/archlinux/$repo/os/$arch[/url]
## Belgium
#Server = [url]ftp://archlinux.mirror.kangaroot.net/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://archlinux.mirror.kangaroot.net/$repo/os/$arch[/url]
## Brazil
#Server = [url]ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/$arch[/url]
#Server = [url]http://archlinux.c3sl.ufpr.br/$repo/os/$arch[/url]
## Canada
#Server = [url]ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.its.dal.ca/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.its.dal.ca/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://less.cogeco.net/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://less.cogeco.net/pub/archlinux/$repo/os/$arch[/url]
## Chile
#Server = [url]ftp://mirror.archlinux.cl/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.netglobalis.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.netglobalis.net/archlinux/$repo/os/$arch[/url]
## China
#Server = [url]http://mirrors.163.com/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.bjtu.edu.cn/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror6.bjtu.edu.cn/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirrors.ustc.edu.cn/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.ustc.edu.cn/archlinux/$repo/os/$arch[/url]
## Colombia
#Server = [url]http://www.laqee.unal.edu.co/archlinux/$repo/os/$arch[/url]
## Czech Republic
#Server = [url]http://mirror.vpsfree.cz/archlinux/$repo/os/$arch[/url]
## Denmark
#Server = [url]ftp://mirrors.dotsrc.org/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.dotsrc.org/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.klid.dk/archlinux/$repo/os/$arch[/url]
## Estonia
#Server = [url]ftp://ftp.eenet.ee/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.eenet.ee/pub/archlinux/$repo/os/$arch[/url]
## Finland
#Server = [url]ftp://mirror.academica.fi/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.academica.fi/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.archlinux.fi/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.archlinux.fi/archlinux/$repo/os/$arch[/url]
## France
#Server = [url]http://mir.archlinux.fr/$repo/os/$arch[/url]
#Server = [url]ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mir1.archlinux.fr/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mir1.archlinux.fr/archlinux/$repo/os/$arch[/url]
#Server = [url]http://miroir.ezvan.fr/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://archlinux.polymorf.fr/$repo/os/$arch[/url]
## Germany
#Server = [url]http://archlinux.limun.org/$repo/os/$arch[/url]
#Server = [url]ftp://artfiles.org/archlinux.org/$repo/os/$arch[/url]
#Server = [url]http://artfiles.org/archlinux.org/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.de.leaseweb.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.de.leaseweb.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.devnu11.net/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch[/url]
#Server = [url]http://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch[/url]
#Server = [url]ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirrors.n-ix.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.n-ix.net/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.selfnet.de/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.selfnet.de/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch[/url]
## Great Britain
#Server = [url]ftp://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://archlinux.positive-internet.com/$repo/os/$arch[/url]
#Server = [url]http://archlinux.positive-internet.com/$repo/os/$arch[/url]
#Server = [url]ftp://mirrors.uk2.net/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://archlinux.mirrors.uk2.net/$repo/os/$arch[/url]
## Greece
#Server = [url]ftp://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.otenet.gr/pub/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.otenet.gr/linux/archlinux/$repo/os/$arch[/url]
## Hungary
#Server = [url]ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/$arch[/url]
## India
#Server = [url]ftp://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch[/url]
## Ireland
#Server = [url]ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch[/url]
#Server = [url]http://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch[/url]
## Israel
#Server = [url]ftp://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch[/url]
## Italy
#Server = [url]http://mirrors.prometeus.net/archlinux/$repo/os/$arch[/url]
## Japan
#Server = [url]ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch[/url]
## Kazakhstan
#Server = [url]ftp://archlinux.kz/$repo/os/$arch[/url]
#Server = [url]http://archlinux.kz/$repo/os/$arch[/url]
## Korea
#Server = [url]ftp://mirror.yongbok.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.yongbok.net/archlinux/$repo/os/$arch[/url]
## Latvia
#Server = [url]http://archlinux.goodsoft.lv/$repo/os/$arch[/url]
## Luxembourg
#Server = [url]ftp://archlinux.mirror.root.lu/archlinux/$repo/os/$arch[/url]
#Server = [url]http://archlinux.mirror.root.lu/$repo/os/$arch[/url]
## Moldova
#Server = [url]ftp://mirror.ihost.md/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.ihost.md/archlinux/$repo/os/$arch[/url]
## Netherlands
#Server = [url]http://mirrors3.kernel.org/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch[/url]
## New Caledonia
#Server = [url]ftp://archlinux.nautile.nc/archlinux/$repo/os/$arch[/url]
#Server = [url]http://archlinux.nautile.nc/archlinux/$repo/os/$arch[/url]
## Norway
#Server = [url]ftp://mirror.archlinux.no/$repo/os/$arch[/url]
#Server = [url]http://mirror.archlinux.no/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.pvv.ntnu.no/pub/archlinux/$repo/os/$arch[/url]
## Poland
#Server = [url]ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/$arch[/url]
#Server = [url]http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/$arch[/url]
## Portugal
#Server = [url]ftp://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch[/url]
## Romania
#Server = [url]ftp://mirrors.adnettelecom.ro/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.adnettelecom.ro/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.archlinux.ro/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.archlinux.ro/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.roedu.net/mirrors/archlinux.org/$repo/os/$arch[/url]
#Server = [url]http://ftp.roedu.net/mirrors/archlinux.org/$repo/os/$arch[/url]
## Russia
#Server = [url]http://mirror.worldis.me/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.yandex.ru/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.yandex.ru/archlinux/$repo/os/$arch[/url]
## Spain
#Server = [url]ftp://ftp.rediris.es/mirror/archlinux/$repo/os/$arch[/url]
#Server = [url]http://sunsite.rediris.es/mirror/archlinux/$repo/os/$arch[/url]
## Sweden
#Server = [url]ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors4.kernel.org/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch[/url]
## Switzerland
#Server = [url]ftp://archlinux.puzzle.ch/$repo/os/$arch[/url]
#Server = [url]http://archlinux.puzzle.ch/$repo/os/$arch[/url]
## Taiwan
#Server = [url]ftp://linux.cs.nctu.edu.tw/archlinux/$repo/os/$arch[/url]
#Server = [url]http://linux.cs.nctu.edu.tw/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://shadow.ind.ntou.edu.tw/archlinux/$repo/os/$arch[/url]
#Server = [url]http://shadow.ind.ntou.edu.tw/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch[/url]
## Turkey
#Server = [url]ftp://ftp.linux.org.tr/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.linux.org.tr/archlinux/$repo/os/$arch[/url]
## Ukraine
#Server = [url]ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch[/url]
## United States
Server = [url]ftp://archlinux.supsec.org/pub/linux/arch/$repo/os/$arch[/url]
Server = [url]http://archlinux.supsec.org/$repo/os/$arch[/url]
Server = [url]ftp://cake.lib.fit.edu/archlinux/$repo/os/$arch[/url]
Server = [url]http://cake.lib.fit.edu/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirrors.cat.pdx.edu/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirror.ece.vt.edu/archlinux/$repo/os/$arch[/url]
Server = [url]ftp://ftp.archlinux.org/$repo/os/$arch[/url]
Server = [url]ftp://ftp.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch[/url]
Server = [url]http://www.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch[/url]
Server = [url]ftp://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirrors1.kernel.org/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirrors2.kernel.org/archlinux/$repo/os/$arch[/url]
Server = [url]ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/$arch[/url]
Server = [url]ftp://lug.mtu.edu/archlinux/ftpfull/$repo/os/$arch[/url]
Server = [url]http://lug.mtu.edu/archlinux/ftpfull/$repo/os/$arch[/url]
Server = [url]http://mirror.mocker.org/archlinux/$repo/os/$arch[/url]
Server = [url]ftp://ftp.osuosl.org/pub/archlinux/$repo/os/$arch[/url]
Server = [url]http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch[/url]
Server = [url]ftp://mirror.rit.edu/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirror.rit.edu/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirrors.rutgers.edu/archlinux/$repo/os/$arch[/url]
Server = [url]http://mirrors.lax1.thegcloud.com/arch//$repo/os/$arch[/url]
Server = [url]http://mirror.yellowfiber.net/archlinux/$repo/os/$arch[/url]
## Uzbekistan
#Server = [url]ftp://mirrors.st.uz/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.st.uz/archlinux/$repo/os/$arch[/url]
/etc/pacman.conf:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
iwconfig:
wlan0 IEEE 802.11bg ESSID:"default-g"
Mode:Managed Frequency:2.462 GHz Access Point: 00:11:95:68:33:6A
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=66/70 Signal level=-44 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
pacman -S sudo:
sudo package not found, searching for group...
error: 'sudo': not found in sync db
pacman -Syy:
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
downloading core.db.tar.gz...
error: failed retrieving file 'extra.db.tar.gz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
downloading extra.db.tar.gz...
error: failed retrieving file 'community.db.tar.gz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
downloading community.db.tar.gz...
pacman -Syu:
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
downloading core.db.tar.gz...
error: failed retrieving file 'extra.db.tar.gz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
downloading extra.db.tar.gz...
error: failed retrieving file 'community.db.tar.gz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
downloading community.db.tar.gz...
:: Starting full system upgrade...
local database is up to date
Note: both Syu and Syy from the console show the [######] 100% line, but won't output with >
pacman -V:
.--. Pacman v3.3.3 - libalpm v4.0.3
/ _.-' .-. .-. .-. Copyright (C) 2006-2009 Pacman Development Team
\ '-. '-' '-' '-' Copyright (C) 2002-2006 Judd Vinet
This program may be freely redistributed under
the terms of the GNU General Public License.
ping google.com:
PING google.com (74.125.224.49) 56(84) bytes of data.
64 bytes from 74.125.224.49: icmp_seq=1 ttl=55 time=18.3 ms
64 bytes from 74.125.224.49: icmp_seq=2 ttl=55 time=21.8 ms
64 bytes from 74.125.224.49: icmp_seq=3 ttl=55 time=18.4 ms
64 bytes from 74.125.224.49: icmp_seq=4 ttl=55 time=16.8 ms
64 bytes from 74.125.224.49: icmp_seq=5 ttl=55 time=18.3 ms
--- google.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 16.889/18.764/21.839/1.647
Hope that helps. Thanks!
Last edited by bananagranola (2011-08-08 05:23:33)

[SOLVED] multiple issues after ram upgrade

hi everyone!
2 new ram modules arrived this morning, which i hastily installed in my machine. this is where the fun starts...
issue 1: no initramfs
so the boot process starts normally it seems. i get past grub and the initramfs starts to load. thats also where it stops dead.
a little google-fu reveals that i should try and chroot from a live iso and recreate mkinitcpio. seems easy enough... but:
issue 2: cannot boot live iso
multiple tries fail, when i finally stumble upon a post mentioning that the live iso cant handle large amounts of ram that well. adding
ram=2048M
gets me one step further. but still no dice. this time she just reboots after systemd does its thing.
what seems like hours later, i manage to get to the root prompt by also adding
nomodeset acpi=off
to the kernel line. so far so good. seems my nvidia gtx 970 and nouveau dont play nice, but that seemed to solve that.
next up: chrooting and rebuilding the initramfs. following the instructions in the beginners guide, i try and mount my root partition, which leads to...
issue 3: cannot mount btrfs root partition
mkdir works fine for the mount point. no problems there. the mount command itself seems to work somewhat too, telling me that sda1 is a btrfs filesystem on an ssd (which it is). then, however, a mysterious series of lines pop up telling me that it is "calling CRDA to update world regulatory domain"...
about a dozen lines of information appear and stop dead yet again.
utterly defeated, i decide its time to do some old fashioned hardware debugging. so i swap out the ram modules (2 sets of 2), popping them in multiple configs in the appropriate slots. memtest64 runs through fine in all configurations. nothing special to be found in the bios either. the 2 sets are from different manufacturers (a-data doesnt make the original set anymore - and havent produced a new set with the same specs), though i did pay attention to the timings, clockspeed and size (everything matches on paper). ending up at the last resort: putting everything back together again as it was originally, i reboot, praying for a familiar boot sequence and maybe even a gdm login prompt. but no such luck today. i am now stuck at
issue 4: putting humpty dumpty back together again
grub loads up normally. systemd fires up and im now faced with this:
INFO task mount:172 blocked for more than 120 seconds.
Not tainted 3.19.2-1-ARCH #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
INFO task btrfs-transacti:194 blocked for more than 120 seconds.
...repeats last INFO a few times...
so that brings us up to speed i guess. im out of ideas and the interwebs dont seem to have anything more to offer with my somewhat intricate set of problems. i know most of you are tinkerers like myself, and i hope theres someone out there that can help me out. to help you help me, here are a few specs and bits of info that might be of interest:
mobo: gigabyte 990fxa-ud5
cpu: amd fx 8350
ram (old): 2x4GB a-data ddr3 2000Mhz C9
ram (new): 2x4GB avexir ddr3 2000Mhz C9
bios settings: defaults all around, except iommu is activated (iommu=pt added to kernel line to let bios handle iommu)
gpu: nvidia gtx 970
partitioning (from what i can remember - i can post exact info, if its needed):
root: 60GB SSD (btrfs)
home: 200GB SSD (btrfs)
var: 20 GB on 1TB HDD (btrfs)
storage: rest of the 1TB HDD (btrfs - i think. this may be an ext4 partition, im not 100% certain)
any help or hints are greatly appreciated!
thanks a lot in advance!
regards,
m.
Last edited by miles969 (2015-04-03 17:10:30)

thanks ewaller, but i had tried that before...
turns out the arch iso was the culprit. i found an ubuntu-gnome live usb and popped it in. surprisingly, chrooting worked fine with that iso and i managed to boot successfully after running
/usr/bin/mkinitcpio -p linux
a few minor fixes (network device names had changed) and im up and running again... with all the ram, no less!
thanks a lot again!
regards,
m.

[solved] pacman broken after "pacman -Syyu" excluding pacman

Hi forums,
I use arch x86_64, yaourt and the testing and multilib repositories.
A full system upgrade doing "yaourt -Syyu" didn't work, because pacman had an unfulfilled dependancy which I don't recall, but it was about a normal and a multilib version: I probably have the multilib version of a library installed, which has not been updated to the version required by pacman yet.
So I thought it would be perfectly fine to exclude pacman from this system upgrade by choosing "manually" from the options given by "yaourt -Syyu" and commented pacman.
The upgrade then went fine except for the two final lines:
package-query: error while loading shared libraries: libarchive.so.2: cannot open shared object file: No such file or directory
testdb: error while loading shared libraries: libarchive.so.2: cannot open shared object file: No such file or directory
Now everytime I try to use pacman, I get this error:
pacman: error while loading shared libraries: libarchive.so.2: cannot open shared object file: No such file or directory
Do you know how to solve this?
Thanks in advance
xiliyi
Last edited by xiliyi (2012-01-05 09:49:23)

ngoonee wrote:Actually (even without cower), makepkg will tell you what dependencies are missing when you try and compile an AUR package. In fact, -s will install them for you (unless they're from the AUR, in which case you have to download/makepkg that package first).
Actually, I was more concerned about updates for packages from AUR. yaourt would handle AUR packages as if they were in a repository, and update them, solving dependency problems.
Now what I fear is, that if some regular library gets an update, it may not updated on my system in the first place, because pacman only sees that the older version is needed for the AUR software, but is not capable of updating the AUR package (which works with the new library version) automatically. So updates will break some software unless I remove it first and install the latest version manually.

[Solved] Pacman error after incomplete upgrade

Hi
I was updating my archlinux when my X11 crashed (I was restarting it after tweaking my gnome 3) .
Trying to update after that indicated that my system was already uptodate. Installing anything indicated that pacman was running else to delete a file /var/lib/pacman/db.lck , which I did.
Now I can install but get these errors (for an example of re-installing pacman):
pacman -S pacman
warning: pacman-3.5.4-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/xulrunner-6.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/xulrunner-6.0-1/desc: No such file or directory
Targets (1): pacman-3.5.4-3
Total Download Size: 0.00 MB
Total Installed Size: 2.87 MB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) upgrading pacman [######################] 100%
ldconfig: file /usr/lib/xulrunner-6.0/libxul.so is truncated
Can any one help me? I am clueless. I know I made a mistake ... will be careful next time. Also I am sure that my system is not upto date, though pacman indicates it is.
Last edited by jlight2011 (2011-08-17 12:00:19)

No luck mate!
I get the following
pacman -Syy
:: Synchronizing package databases...
core 35.6K 1413.9K/s 00:00:00 [#######################################################] 100%
warning: resuming download of extra.db not possible; starting over
error: extra.db appears to be truncated: 485471/485689 bytes 176.0K 289.1K/s 00:00:01 [####################-----------------------------------] 37%
error: failed to update extra (failed to retrieve some files)
multilib 26.5K 204.0M/s 00:00:00 [#######################################################] 100%
I tried copying the extra.db file directly from my repo to the folder. But get the same error!

[SOLVED] pacman: -Syy and -Syu reports system up to date

Hi,
I ran pacman -Syy and pacman -Syu and it updated my one system to the Sept 9 kernel etc.
I ran the same on my other system, and it reports all is up to date (local database up to date) but it is stil on the Aug 17 kernel etc.
Any suggestions would be appreciated.
Thanks
Willem
Last edited by Willem (2009-11-06 21:46:28)

Thanks, that was it, used the mirrorlist from the other box.
Thanks again, didn't think the mirrors would be that unsynced.

[solved] Boot issues after update caused by LVM

Hi,
I know that there are some threads regarding boot issues but I haven't been able to find a solution for my problem.
I have the following partitions:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
├─sda1 8:1 0 128M 0 part /boot
├─sda2 8:2 0 2G 0 part [SWAP]
└─sda3 8:3 0 72.4G 0 part
├─vg_trinity-root (dm-0) 254:0 0 10G 0 lvm /
└─vg_trinity-home (dm-1) 254:1 0 25G 0 lvm /home
I have
USELVM="yes"
in my rc.conf and the following im mkinitcpio.conf:
HOOKS="base udev autodetect pata scsi sata lvm2 filesystems"
Still, when booting the volume group does not get activated. The following message appears:
:: running hook [lvm2]
Activating logical volumes...
No volume groups found
Waiting 10 seconds for device /dev/mapper/vg_trinity-root ...
ERROR: Unable to find root device '/dev/mapper/vg_trinity-root'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]#
At that point I just run
lvm vgchange -ay
exit the shell and booting continues. So somehow activation of the volume group does not occur early enough. I reinstalled udev, mkinitcpio, linux and generated a new boot image as proposed in https://bbs.archlinux.org/viewtopic.php … 4#p1059124 but to no avail. Is there anything else that might be wrong with my configuration?
Thanks for any help.
mK
Last edited by musiKk (2012-09-09 16:23:17)

My apologies. Usually I'm quite good at searching but this one slipped right past me. Marking as solved (even though the root cause is still WIP).

[SOLVED] Eclipse broken after -Syu

Hello,
I -Syued today and can no longer run Eclipse.
This goes to console:
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Require-Bundle: org.eclipse.core.jobs; bundle-version="[3.2.0,4.0.0)"
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:305)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:265)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:257)
at org.eclipse.equinox.internal.simpleconfigurator.ConfigApplier.startBundles(ConfigApplier.java:317)
at org.eclipse.equinox.internal.simpleconfigurator.ConfigApplier.install(ConfigApplier.java:86)
at org.eclipse.equinox.internal.simpleconfigurator.SimpleConfiguratorImpl.applyConfiguration(SimpleConfiguratorImpl.java:124)
at org.eclipse.equinox.internal.simpleconfigurator.SimpleConfiguratorImpl.applyConfiguration(SimpleConfiguratorImpl.java:138)
at org.eclipse.equinox.internal.simpleconfigurator.Activator.start(Activator.java:48)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:1009)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:1003)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:984)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:346)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:355)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1074)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:616)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:508)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:299)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.launch(StartLevelManager.java:247)
at org.eclipse.osgi.framework.internal.core.SystemBundle.resume(SystemBundle.java:201)
at org.eclipse.osgi.framework.internal.core.Framework.launch(Framework.java:644)
at org.eclipse.osgi.framework.internal.core.OSGi.launch(OSGi.java:51)
at org.eclipse.core.runtime.adaptor.EclipseStarter.startup(EclipseStarter.java:313)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:175)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
I get this messagebox error:
An error has occurred. See the log file
/home/dante4d/.eclipse/org.eclipse.platform_3.4.0_1543616141/configuration/1241874268396.log.
And here are first 35 lines of 1241874268396.log logfile:
!SESSION 2009-05-09 15:01:09.967 -----------------------------------------------
eclipse.buildId=M20090211-1700
java.version=1.6.0_13
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.core.runtime 4 0 2009-05-09 15:01:10.739
!MESSAGE
!STACK 0
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Require-Bundle: org.eclipse.core.jobs; bundle-version="[3.2.0,4.0.0)"
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:305)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:355)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1074)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:616)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:508)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:299)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:489)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:211)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:321)
!ENTRY org.eclipse.osgi 4 0 2009-05-09 15:01:10.746
!MESSAGE Application error
!STACK 1
java.lang.IllegalStateException: Unable to acquire application service. Ensure that the org.eclipse.core.runtime bundle is resolved and started (see config.ini).
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:74)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
The whole logfile is here: http://pub.dante4d.cz/1241874070229.log
The mentioned config.ini file - I have two of them:
/home/dante4d/.eclipse/org.eclipse.platform_3.4.0_1543616141/configuration/config.ini
#This configuration file was written by: org.eclipse.equinox.internal.frameworkadmin.equinox.EquinoxFwConfigFileParser
#Sat Apr 04 20:03:58 CEST 2009
osgi.sharedConfiguration.area=file\:configuration/
/usr/share/eclipse/configuration/config.ini
#This configuration file was written by: org.eclipse.equinox.internal.frameworkadmin.equinox.EquinoxFwConfigFileParser
#Wed Feb 11 19:26:47 EST 2009
org.eclipse.update.reconcile=false
eclipse.p2.profile=SDKProfile
[email protected]/workspace
osgi.framework=file\:plugins/org.eclipse.osgi_3.4.3.R34x_v20081215-1030.jar
eclipse.buildId=M20090211-1700
osgi.bundles=reference\:file\:org.eclipse.equinox.simpleconfigurator_1.0.0.v20080604.jar@1\:start
org.eclipse.equinox.simpleconfigurator.configUrl=file\:org.eclipse.equinox.simpleconfigurator/bundles.info
eclipse.product=org.eclipse.sdk.ide
osgi.splashPath=platform\:/base/plugins/org.eclipse.platform
[email protected]/../p2
osgi.bundles.defaultStartLevel=4
osgi.ws=gtk
As always, I tried to do -Sf eclipse jre jdk to see, if it's not just a corrupt package installation, but it didn't help. Package versions are eclipse 3.4.2-1, jre 6u13-1, jdk 6u13-1. Maybe someone encontered this problem too? Just to check meanwhile I google for the solution...
Regards,
David
Last edited by dante4d (2009-05-09 14:03:57)

Allan wrote:What did you update?
Well as I said, I -Syued. This is what got updated, I pretty much slept away on it last few days, so it's been more than a few packages (hope this is what oyu meant):
[2009-05-09 12:11] synchronizing package lists
[2009-05-09 12:11] starting full system upgrade
[2009-05-09 12:46] starting full system upgrade
[2009-05-09 13:09] upgraded kernel-headers (2.6.27.6-2 -> 2.6.29.1-1)
[2009-05-09 13:09] upgraded tzdata (2009e-1 -> 2009f-1)
[2009-05-09 13:09] Generating locales...
[2009-05-09 13:10] cs_CZ.UTF-8... done
[2009-05-09 13:10] cs_CZ.ISO-8859-2... done
[2009-05-09 13:10] en_US.UTF-8... done
[2009-05-09 13:10] en_US.ISO-8859-1... done
[2009-05-09 13:10] Generation complete.
[2009-05-09 13:10] upgraded glibc (2.9-4 -> 2.9-7)
[2009-05-09 13:10] upgraded acpid (1.0.8-1 -> 1.0.10-1)
[2009-05-09 13:10] upgraded avahi (0.6.24-3 -> 0.6.25-1)
[2009-05-09 13:10] upgraded binutils (2.19.1-1 -> 2.19.1-2)
[2009-05-09 13:10] upgraded gcc-libs (4.3.3-1 -> 4.4.0-1)
[2009-05-09 13:10] upgraded xmlrpc-c (1.06.32-2 -> 1.06.33-1)
[2009-05-09 13:10] upgraded cmake (2.6.3-1 -> 2.6.4-2)
[2009-05-09 13:10] upgraded cracklib (2.8.13-1 -> 2.8.13-2)
[2009-05-09 13:10] upgraded libtasn1 (1.8-1 -> 2.1-1)
[2009-05-09 13:10] upgraded gnutls (2.6.4-1 -> 2.6.6-1)
[2009-05-09 13:10] upgraded libpng (1.2.35-1 -> 1.2.36-1)
[2009-05-09 13:10] upgraded libcups (1.3.9-3 -> 1.3.10-2)
[2009-05-09 13:10] upgraded openssl (0.9.8k-1 -> 0.9.8k-2)
[2009-05-09 13:10] upgraded openslp (1.2.1-1 -> 1.2.1-2)
[2009-05-09 13:10] upgraded poppler (0.10.5-1 -> 0.10.6-1)
[2009-05-09 13:10] warning: /etc/cups/cupsd.conf installed as /etc/cups/cupsd.conf.pacnew
[2009-05-09 13:10] upgraded cups (1.3.9-4 -> 1.3.10-3)
[2009-05-09 13:10] upgraded dri2proto (1.99.3-1 -> 2.0-1)
[2009-05-09 13:10] upgraded e2fsprogs (1.41.4-1 -> 1.41.5-2)
[2009-05-09 13:10] upgraded libxext (1.0.5-1 -> 1.0.5-2)
[2009-05-09 13:10] upgraded libxfixes (4.0.3-1 -> 4.0.3-2)
[2009-05-09 13:10] upgraded libxcomposite (0.4.0-1 -> 0.4.0-2)
[2009-05-09 13:10] upgraded renderproto (0.9.3-1 -> 0.9.3-2)
[2009-05-09 13:10] upgraded libxrender (0.9.4-1 -> 0.9.4-2)
[2009-05-09 13:10] upgraded libxcursor (1.1.9-1 -> 1.1.9-2)
[2009-05-09 13:10] upgraded libxdamage (1.1.1-1 -> 1.1.1-2)
[2009-05-09 13:10] upgraded xineramaproto (1.1.2-1 -> 1.1.2-2)
[2009-05-09 13:10] upgraded libxinerama (1.0.3-1 -> 1.0.3-2)
[2009-05-09 13:10] upgraded freetype2 (2.3.9-1 -> 2.3.9-2)
[2009-05-09 13:10] upgraded pango (1.24.0-2 -> 1.24.1-1)
[2009-05-09 13:10] upgraded gtk2 (2.16.0-1 -> 2.16.1-1)
[2009-05-09 13:10] upgraded recordproto (1.13.2-1 -> 1.13.2-2)
[2009-05-09 13:10] upgraded libxtst (1.0.3-1 -> 1.0.3-2)
[2009-05-09 13:10] The jre package is licensed software.
[2009-05-09 13:10] You MUST read and agree to the license stored in
[2009-05-09 13:10] /opt/java/jre/LICENSE before using it.
[2009-05-09 13:10] upgraded jre (6u12-1 -> 6u13-1)
[2009-05-09 13:11] The jdk package is licensed software.
[2009-05-09 13:11] You MUST read and agree to the license stored in
[2009-05-09 13:11] /opt/java/LICENSE before using it.
[2009-05-09 13:11] upgraded jdk (6u12-1 -> 6u13-1)
[2009-05-09 13:11] upgraded libxt (1.0.5-1 -> 1.0.5-2)
[2009-05-09 13:11] upgraded nspr (4.7.3-1 -> 4.7.4-1)
[2009-05-09 13:11] upgraded sqlite3 (3.6.12-1 -> 3.6.13-1)
[2009-05-09 13:11] upgraded nss (3.12.2-1 -> 3.12.3-1)
[2009-05-09 13:11] upgraded xcb-util (0.3.3-1 -> 0.3.4-2)
[2009-05-09 13:11] upgraded startup-notification (0.9-1 -> 0.10-1)
[2009-05-09 13:11] upgraded xulrunner (1.9.0.8-1 -> 1.9.0.10-1)
[2009-05-09 13:11] upgraded eclipse (3.4.1-1 -> 3.4.2-1)
[2009-05-09 13:11] upgraded hal-info (0.20081219-1 -> 0.20090414-1)
[2009-05-09 13:11] upgraded usbutils (0.73-5 -> 0.81-1)
[2009-05-09 13:11] upgraded hal (0.5.11-7 -> 0.5.12git20090421.4fc367-2)
[2009-05-09 13:11] upgraded libxfce4util (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:11] upgraded exo (0.3.100-1 -> 0.3.101-1)
[2009-05-09 13:11] upgraded findutils (4.4.0-1 -> 4.4.1-1)
[2009-05-09 13:11] upgraded firefox (3.0.8-1 -> 3.0.10-1)
[2009-05-09 13:11] upgraded foomatic-db (4.0_20090306-1 -> 4.0_20090424-1)
[2009-05-09 13:11] upgraded ghostscript (8.64-3 -> 8.64-5)
[2009-05-09 13:11] upgraded foomatic-filters (4.0_20090315-1 -> 4.0_20090424-1)
[2009-05-09 13:11] upgraded foomatic-db-engine (4.0_20090306-1 -> 4.0_20090424-1)
[2009-05-09 13:11] upgraded foomatic-db-hpijs (20090306-1 -> 20090424-1)
[2009-05-09 13:11] upgraded fribidi (0.10.9-1 -> 0.19.2-1)
[2009-05-09 13:12] installed ppl (0.10.2-2)
[2009-05-09 13:12] installed cloog-ppl (0.15.3-1)
[2009-05-09 13:12] upgraded gcc (4.3.3-1 -> 4.4.0-1)
[2009-05-09 13:12] upgraded git (1.6.2.2-1 -> 1.6.2.4-1)
[2009-05-09 13:12] upgraded gnome-doc-utils (0.16.0-1 -> 0.16.1-1)
[2009-05-09 13:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2009-05-09 13:12] Updating TeX tree...
[2009-05-09 13:12] upgraded gnuplot (4.2.4-1 -> 4.2.5-1)
[2009-05-09 13:12] upgraded gperf (3.0.3-1 -> 3.0.4-1)
[2009-05-09 13:12] upgraded graphviz (2.20.3-1 -> 2.22.2-1)
[2009-05-09 13:12] upgraded gtkspell (2.0.15-1 -> 2.0.15-1.1)
[2009-05-09 13:12] upgraded hdparm (9.14-1 -> 9.15-1)
[2009-05-09 13:12] ==> Run 'hwd -u' to update xorgtable, pci-, and usb.ids.
[2009-05-09 13:12] upgraded hwd (5.4.3-1 -> 5.5-1)
[2009-05-09 13:12] upgraded sed (4.1.5-3 -> 4.2-1)
[2009-05-09 13:12] upgraded hwdetect (2009.03-1 -> 2009.04-1)
[2009-05-09 13:12] upgraded imagemagick (6.5.0.10-1 -> 6.5.1.9-1)
[2009-05-09 13:12] upgraded iptables (1.4.3.1-1 -> 1.4.3.2-1)
[2009-05-09 13:12] upgraded jfsutils (1.1.13-1 -> 1.1.14-1)
[2009-05-09 13:12] >>> Updating module dependencies. Please wait ...
[2009-05-09 13:12] >>> MKINITCPIO SETUP
[2009-05-09 13:12] >>> ----------------
[2009-05-09 13:12] >>> If you use LVM2, Encrypted root or software RAID,
[2009-05-09 13:12] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-05-09 13:12] >>> More information about mkinitcpio setup can be found here:
[2009-05-09 13:12] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-05-09 13:12]
[2009-05-09 13:12] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-05-09 13:12] ==> Building image "default"
[2009-05-09 13:12] ==> Running command: /sbin/mkinitcpio -k 2.6.29-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-05-09 13:12] :: Begin dry run
[2009-05-09 13:12] :: Parsing hook [base]
[2009-05-09 13:12] :: Parsing hook [udev]
[2009-05-09 13:13] :: Parsing hook [autodetect]
[2009-05-09 13:13] :: Parsing hook [sata]
[2009-05-09 13:13] :: Parsing hook [usb]
[2009-05-09 13:13] :: Parsing hook [keymap]
[2009-05-09 13:13] :: Parsing hook [lvm2]
[2009-05-09 13:13] :: Parsing hook [resume]
[2009-05-09 13:13] :: Parsing hook [filesystems]
[2009-05-09 13:13] :: Generating module dependencies
[2009-05-09 13:13] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-05-09 13:13] ==> SUCCESS
[2009-05-09 13:13] ==> Building image "fallback"
[2009-05-09 13:13] ==> Running command: /sbin/mkinitcpio -k 2.6.29-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-05-09 13:13] :: Begin dry run
[2009-05-09 13:13] :: Parsing hook [base]
[2009-05-09 13:13] :: Parsing hook [udev]
[2009-05-09 13:13] :: Parsing hook [sata]
[2009-05-09 13:13] :: Parsing hook [usb]
[2009-05-09 13:13] :: Parsing hook [keymap]
[2009-05-09 13:13] :: Parsing hook [lvm2]
[2009-05-09 13:13] :: Parsing hook [resume]
[2009-05-09 13:13] :: Parsing hook [filesystems]
[2009-05-09 13:13] :: Generating module dependencies
[2009-05-09 13:13] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-05-09 13:13] ==> SUCCESS
[2009-05-09 13:13] upgraded kernel26 (2.6.29.1-3 -> 2.6.29.2-1)
[2009-05-09 13:13] upgraded less (418-1 -> 429-1)
[2009-05-09 13:13] upgraded libdatrie (0.2.1-1 -> 0.2.2-1)
[2009-05-09 13:13] upgraded libgsf (1.14.11-1 -> 1.14.12-1)
[2009-05-09 13:13] upgraded libidn (1.13-1 -> 1.14-1)
[2009-05-09 13:13] upgraded libmysqlclient (5.1.33-1 -> 5.1.34-1)
[2009-05-09 13:13] upgraded libnotify (0.4.5-1 -> 0.4.5-1.1)
[2009-05-09 13:13] upgraded libpciaccess (0.10.5-1 -> 0.10.6-1)
[2009-05-09 13:13] upgraded libshout (2.2.2-2 -> 2.2.2-3)
[2009-05-09 13:13] upgraded libsmbios (2.0.2-1 -> 2.2.16-1)
[2009-05-09 13:13] upgraded libsoup (2.26.0-1 -> 2.26.1-1)
[2009-05-09 13:13] upgraded libstdc++5 (3.3.6-2 -> 3.3.6-3)
[2009-05-09 13:13] upgraded libxres (1.0.3-1 -> 1.0.3-2)
[2009-05-09 13:13] upgraded libwnck (2.26.0-1 -> 2.26.1-1)
[2009-05-09 13:13] upgraded libxdmcp (1.0.2-1 -> 1.0.2-2)
[2009-05-09 13:13] upgraded libxfce4menu (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:13] upgraded xfconf (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:13] upgraded libxfcegui4 (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:13] upgraded libxfontcache (1.0.4-1 -> 1.0.4-2)
[2009-05-09 13:13] upgraded libxkbui (1.0.2-1 -> 1.0.2-2)
[2009-05-09 13:13] installed iso-codes (3.8-1)
[2009-05-09 13:13] upgraded libxklavier (3.9-1 -> 3.9-2)
[2009-05-09 13:13] upgraded libxvmc (1.0.4-1 -> 1.0.4-2)
[2009-05-09 13:13] upgraded xf86dgaproto (2.0.3-1 -> 2.0.3-2)
[2009-05-09 13:13] upgraded libxxf86dga (1.0.2-1 -> 1.0.2-2)
[2009-05-09 13:13] upgraded xf86miscproto (0.9.2-1 -> 0.9.2-2)
[2009-05-09 13:13] upgraded libxxf86misc (1.0.1-1 -> 1.0.1-2)
[2009-05-09 13:13] upgraded logrotate (3.7.7-3 -> 3.7.8-1)
[2009-05-09 13:13] upgraded lsof (4.81-1 -> 4.82-1)
[2009-05-09 13:13] upgraded lzo (1.08-4 -> 1.08-5)
[2009-05-09 13:13] upgraded man-pages (3.20-1 -> 3.20-2)
[2009-05-09 13:13] upgraded pixman (0.14.0-1 -> 0.14.0-2)
[2009-05-09 13:13] upgraded xbitmaps (1.0.1-1 -> 1.0.1-2)
[2009-05-09 13:13] upgraded xcursor-themes (1.0.1-1 -> 1.0.1-2)
[2009-05-09 13:13] upgraded xf86-input-evdev (2.2.1-1 -> 2.2.2-1)
[2009-05-09 13:13] upgraded xorg-font-utils (7.4-1 -> 7.4-2)
[2009-05-09 13:13] upgraded xorg-fonts-alias (1.0.1-1 -> 1.0.1-2)
[2009-05-09 13:13] Regenerating font encodings... done.
[2009-05-09 13:13] upgraded xorg-fonts-encodings (1.0.2-2 -> 1.0.2-3)
[2009-05-09 13:14] Updating font cache... done.
[2009-05-09 13:14] upgraded xorg-fonts-misc (1.0.0-3 -> 1.0.0-4)
[2009-05-09 13:14] upgraded xorg-server-utils (7.4-4 -> 7.4-5)
[2009-05-09 13:14] upgraded xorg-server (1.6.0-3 -> 1.6.1-1)
[2009-05-09 13:14] upgraded nvidia-utils (180.44-1 -> 180.51-1)
[2009-05-09 13:14] upgraded mesa (7.4-1 -> 7.4.1-1)
[2009-05-09 13:14] upgraded mime-types (1.0-1 -> 1.0-2)
[2009-05-09 13:14]
[2009-05-09 13:14] ==> You may need to delete your local /home/dante4d/.mozilla/firefox/pluginreg.dat
[2009-05-09 13:14] ==> file for mozplugger to be enabled correctly after you update it.
[2009-05-09 13:14] ==> (It will get regenerated).
[2009-05-09 13:14] ==> To add more helpers, edit /etc/mozpluggerrc.
[2009-05-09 13:14] ==> The window name can be obtained using the utility xprop(1x).
[2009-05-09 13:14] ==> Type xprop WM_CLASS and click on a window.
[2009-05-09 13:14] upgraded mozplugger (1.12.0-2 -> 1.12.1-1)
[2009-05-09 13:14] In order to use the new nvidia module, exit Xserver and unload it manually.
[2009-05-09 13:14] upgraded nvidia (180.44-1 -> 180.51-1)
[2009-05-09 13:15] * relogin or source /etc/profile.d/openoffice.sh
[2009-05-09 13:15] * see http://wiki.archlinux.org/index.php/Openoffice
[2009-05-09 13:15] how to use extensions, e.g. for spell checking
[2009-05-09 13:15] see /opt/openoffice/share/extension/install what
[2009-05-09 13:15] is shipped with this package
[2009-05-09 13:15] upgraded openoffice-base (3.0.1-1 -> 3.1.0-1)
[2009-05-09 13:15] warning: /etc/ssh/ssh_config installed as /etc/ssh/ssh_config.pacnew
[2009-05-09 13:15] upgraded openssh (5.1p1-2 -> 5.2p1-1)
[2009-05-09 13:15] upgraded xfce4-panel (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:15] upgraded orage (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:15] upgraded pcre (7.8-1 -> 7.9-1)
[2009-05-09 13:15] upgraded poppler-glib (0.10.5-1 -> 0.10.6-1)
[2009-05-09 13:15] upgraded pygtk (2.14.1-3 -> 2.14.1-4)
[2009-05-09 13:15] upgraded python-nose (0.10.4-3 -> 0.11.0-1)
[2009-05-09 13:15] upgraded python-numeric (24.2-3 -> 24.2-4)
[2009-05-09 13:15] upgraded resourceproto (1.0.2-1 -> 1.0.2-2)
[2009-05-09 13:15] upgraded tdb (3.3.3-1 -> 3.3.4-1)
[2009-05-09 13:15] upgraded smbclient (3.3.3-1 -> 3.3.4-1)
[2009-05-09 13:15] upgraded samba (3.3.3-1 -> 3.3.4-1)
[2009-05-09 13:15] upgraded scrot (0.8-2 -> 0.8-3)
[2009-05-09 13:15] Fixing gshadow file ...
[2009-05-09 13:15] upgraded shadow (4.1.2.1-2 -> 4.1.3.1-1)
[2009-05-09 13:15] upgraded subversion (1.6.1-2 -> 1.6.1-4)
[2009-05-09 13:15] upgraded sudo (1.7.0-1 -> 1.7.1-1)
[2009-05-09 13:15] upgraded sysvinit (2.86-4 -> 2.86-5)
[2009-05-09 13:15] upgraded tango-icon-theme-extras (0.1.0-2 -> 0.1.0-3)
[2009-05-09 13:15] upgraded tcl (8.5.6-1 -> 8.5.7-1)
[2009-05-09 13:15] upgraded vte (0.20.0-1 -> 0.20.1-1)
[2009-05-09 13:15] upgraded terminal (0.2.10-1 -> 0.2.12-1)
[2009-05-09 13:15] upgraded texlive-bin (2008-3 -> 2008-4)
[2009-05-09 13:15] upgraded thunar (1.0.0-1 -> 1.0.1-1)
[2009-05-09 13:15] upgraded tk (8.5.6-1 -> 8.5.7-1)
[2009-05-09 13:15] upgraded trapproto (3.4.3-1 -> 3.4.3-2)
[2009-05-09 13:16] Updating font cache... done.
[2009-05-09 13:16] upgraded ttf-cheapskate (2.0-5 -> 2.0-6)
[2009-05-09 13:16] upgraded unrar (3.8.5-2 -> 3.9.1-1)
[2009-05-09 13:16] upgraded videoproto (2.2.2-1 -> 2.2.2-2)
[2009-05-09 13:16] upgraded whois (4.7.30-1 -> 4.7.33-1)
[2009-05-09 13:16] upgraded wine (1.1.18-1 -> 1.1.20-1)
[2009-05-09 13:16] upgraded xcmiscproto (1.1.2-1 -> 1.1.2-2)
[2009-05-09 13:16] upgraded xcompmgr (1.1.4-1 -> 1.1.4-2)
[2009-05-09 13:16] upgraded xf86bigfontproto (1.1.2-1 -> 1.1.2-2)
[2009-05-09 13:16] upgraded xf86driproto (2.0.4-1 -> 2.0.4-2)
[2009-05-09 13:16] upgraded xf86vidmodeproto (2.2.2-1 -> 2.2.2-2)
[2009-05-09 13:16] upgraded xfce-utils (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xfce4-appfinder (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xfce4-mixer (4.6.0-2 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xfce4-session (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xfce4-settings (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xfdesktop (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xfprint (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xfwm4 (4.6.0-1 -> 4.6.1-1)
[2009-05-09 13:16] upgraded xorg-apps (7.4-1 -> 7.4-2)
[2009-05-09 13:16] Updating font cache... done.
[2009-05-09 13:16] upgraded xorg-fonts-100dpi (1.0.1-1 -> 1.0.1-2)
[2009-05-09 13:16] upgraded xorg-res-utils (1.0.3-2 -> 1.0.3-3)
[2009-05-09 13:16] upgraded xorg-twm (1.0.4-2 -> 1.0.4-3)
[2009-05-09 13:16] upgraded xorg-utils (7.4-3 -> 7.4-4)
[2009-05-09 13:16] upgraded xorg-xkb-utils (7.4-1 -> 7.4-2)
[2009-05-09 13:16] upgraded xterm (243-1 -> 243-2)
[2009-05-09 13:16] upgraded zip (3.0-1 -> 3.0-1.1)
[2009-05-09 14:36] starting full system upgrade
[2009-05-09 14:37] upgraded eclipse (3.4.2-1 -> 3.4.2-1)
[2009-05-09 15:03] The jre package is licensed software.
[2009-05-09 15:03] You MUST read and agree to the license stored in
[2009-05-09 15:03] /opt/java/jre/LICENSE before using it.
[2009-05-09 15:03] upgraded jre (6u13-1 -> 6u13-1)
[2009-05-09 15:04] The jdk package is licensed software.
[2009-05-09 15:04] You MUST read and agree to the license stored in
[2009-05-09 15:04] /opt/java/LICENSE before using it.
[2009-05-09 15:04] upgraded jdk (6u13-1 -> 6u13-1)
I suppose I should clean my system up a bit looking at the amount of unnecessary packages I have .

[SOLVED] Pacman Issue community.db

I've been trying to use sudo pacman -Syu to upgrade but everytime I try I get this following message:
error: could not open file /var/lib/pacman/sync/community.db: (Empty error message)
warning: fakeroot: local (1.15.1-1) is newer than core (1.14.5-1)
warning: gnutls: local (2.12.2-1) is newer than testing (2.12.1-1)
warning: libx11: local (1.4.3-2) is newer than extra (1.4.3-1)
warning: mpfr: local (3.0.1-1) is newer than core (3.0.0.p8-1)
warning: ncurses: local (5.9-1) is newer than core (5.8-1)
warning: sudo: local (1.8.1-1) is newer than core (1.8.0-4)
warning: taglib: local (1.7-1) is newer than extra (1.6.3-1)
warning: udev: local (167-1) is newer than core (166-2)
warning: usbutils: local (002-2) is newer than core (002-1)
warning: xfsprogs: local (3.1.5-1) is newer than core (3.1.4-1)
there is nothing to do
However when I do this as root I don't get the error, is this common, a google search didn't achieve anything that I could make sense of.
I had a go at reinstalling pacman but it's still there.
Thanks,
Ben.
Last edited by Ben9250 (2011-04-11 22:31:40)

nomorewindows, for me it's the same. I use mirrors.kernel.org too.
# pacman -Su
:: Starting full system upgrade...
warning: bluez: local (4.91-1) is newer than extra (4.90-1)
warning: consolekit: local (0.4.3-3) is newer than extra (0.4.3-2)
warning: devtools: local (0.9.20-1) is newer than extra (0.9.19-1)
warning: dhcpcd: local (5.2.12-1) is newer than core (5.2.11-1)
warning: gnutls: local (2.12.2-1) is newer than extra (2.10.5-1)
warning: kernel26: local (2.6.38.2-1) is newer than core (2.6.37.5-1)
warning: kernel26-headers: local (2.6.38.2-1) is newer than core (2.6.37.5-1)
warning: libgcrypt: local (1.4.6-2) is newer than core (1.4.6-1)
warning: libgpg-error: local (1.9-3) is newer than core (1.9-2)
warning: libx11: local (1.4.3-2) is newer than extra (1.4.3-1)
warning: lirc-utils: local (1:0.9.0-2) is newer than extra (1:0.9.0-1)
warning: mdadm: local (3.2.1-1) is newer than core (3.1.5-1)
warning: phonon-gstreamer: local (4.5.0-1) is newer than extra (4.4.4-1)
warning: php: local (5.3.6-2) is newer than extra (5.3.6-1)
warning: php-apache: local (5.3.6-2) is newer than extra (5.3.6-1)
warning: php-curl: local (5.3.6-2) is newer than extra (5.3.6-1)
warning: php-gd: local (5.3.6-2) is newer than extra (5.3.6-1)
warning: php-mcrypt: local (5.3.6-2) is newer than extra (5.3.6-1)
warning: rsync: local (3.0.8-1) is newer than extra (3.0.7-2)
warning: syslog-ng: local (3.2.2-2) is newer than core (3.2.2-1)
warning: taglib: local (1.7-1) is newer than extra (1.6.3-1)
warning: virtualbox: local (4.0.4-3) is newer than community (4.0.4-2)
warning: wxgtk: local (2.8.12-1) is newer than extra (2.8.11-2)
warning: xextproto: local (7.2.0-1) is newer than extra (7.1.2-1)
warning: xproto: local (7.0.21-1) is newer than extra (7.0.20-1)

[SOLVED]pacman issue -- no mirror is responding

Hello,e verybody ! I have an issue with pacman : I cannot install/update/syncronize with it because no mirror is responding.
I activated every ftp mirror but they all do not answer in the fellowing fashion:
error: failed retrieving file 'core.db.tar.gz' from archlinux.c3sl.ufpr.br : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from archlinux.kz : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from archlinux.mirrors.ovh.net : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from archlinux.nautile.nc : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from archlinux.puzzle.ch : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from archlinux.uib.no : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from artfiles.org : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from distrib-coffee.ipsl.jussieu.fr : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp5.gwdg.de : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.cc.uoc.gr : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.ds.hj.se : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.eenet.ee : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.gtlib.gatech.edu : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.halifax.rwth-aachen.de : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.heanet.ie : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.hosteurope.de : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.iinet.net.au : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.jaist.ac.jp : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.klid.dk : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.las.ic.unicamp.br : Connection timed out
error: failed retrieving file 'core.db.tar.gz' from ftp.linux.kiev.ua : Connection timed out
The issue stands whichever I use ethernet or the wireless connection...
I'm stuck with it. Hence, any help is welcomed and thanked !
EDIT: The solution was easy… My university filters every ftp requests, i simply have to us http mirrors.
Last edited by laerne (2011-12-20 09:03:41)

How about http mirrors?
Edit: Any .pacnew files like https://bbs.archlinux.org/viewtopic.php … 28#p749428 ?
Last edited by karol (2010-12-02 18:14:38)

How can I solve several issues after an automatic Windows update ?

Hi,
Would be great if you could help.
I use Windows 7. Some major Windows update must have been applied that really messed up a few things, including my Firefox browser.
Issue 1: All my bookmarks are gone.
Issue 2: When I try to locate the Profile Folder (to try and get my old bookmarks, permitted sites etc.) I get an error message instead. It reads "[path] refers to a location that is unavailable."
Issue 3: When I set Firefox as my default browser, the next day I have to repeat this step, and both icons in the start menu and on the taskbar are not there anymore.
Is there any way of fixing these issues?

Where was it stored?
If you've been using your phone as designed, you've been synching your contacts with a contact manager app on your phone or with a cloud service.
Just synch your contacts back.
If you've not been using your phone as recommended then you've lost your data.

[SOLVED] Pacman issue after -Syu

Similar Messages

Maybe you are looking for