[SOLVED] PEAK PCAN-Dongle - macro "__DATE__"
Hi all.
I'm trying to install the PEAKs PCAN-USB drivers.
I'm getting both time and data macro errors:
macro "__DATE__" might prevent reproducible builds
macro "__TIME__" might prevent reproducible builds
The compiler output is:
*** Host machine kernel version=3.15.1-1-ARCH
*** Driver kernel version=3.15.1-1-ARCH
*** Path to kernel sources=/lib/modules/3.15.1-1-ARCH/build
*** use KBUILD=yes
make -C /lib/modules/3.15.1-1-ARCH/build SUBDIRS=/home/lbromo12/builds/peak-linux-driver-7.11/driver EXTRA_CFLAGS="-I/home/lbromo12/builds/peak-linux-driver-7.11/driver -DNO_DEBUG -DMODVERSIONS -DPARPORT_SUBSYSTEM -DUSB_SUPPORT -DPCI_SUPPORT -DPCIEC_SUPPORT -DISA_SUPPORT -DDONGLE_SUPPORT -DPCCARD_SUPPORT -DNO_NETDEV_SUPPORT -DNO_RT " V=0 modules
make[2]: Entering directory '/usr/lib/modules/3.15.1-1-ARCH/build'
CC [M] /home/lbromo12/builds/peak-linux-driver-7.11/driver/src/pcan_main.o
/home/lbromo12/builds/peak-linux-driver-7.11/driver/src/pcan_main.c: In function ‘pcan_read_procmem’:
/home/lbromo12/builds/peak-linux-driver-7.11/driver/src/pcan_main.c:396:3: error: macro "__DATE__" might prevent reproducible builds [-Werror=date-time]
__DATE__, __TIME__);
^
/home/lbromo12/builds/peak-linux-driver-7.11/driver/src/pcan_main.c:396:13: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
__DATE__, __TIME__);
^
cc1: some warnings being treated as errors
There were none -Werror flags in any of the make files, and i've removed -Wall from the make files, just to see, both the sammer error occurs.
I have no idea why this is :S
I found a post with similar error messages (https://bbs.archlinux.org/viewtopic.php?id=180922), but seemd not to be usefull for this problem
Last edited by lbromo (2014-07-10 09:55:49)
Hi,
Today I hit the exactly same problem when I tried to use PCAN-USB on arch. I could work around this by adding "-Wno-error=date-time" to _CFLAGS in the Makefile. Alternatively you can use the RT_CFLAGS environment variable which is used by the Makefile. However, this work around works only for PCAN-USB driver since only this Makefile uses the RT_CFLAGS I guess...
make RT_CFLAGS="-Wno-error=date-time"
falstaff
Similar Messages
-
Excel Macro "Memory exhausted"
I try to start an Excel Macro and everytime when i started it, comes a message like that: Solver: An unexspected internal error occurred, or available memory was exhausted"
I try to start the Excel Solver Function with a macro from Labview. I use Excel 2003 and Labview 7.1.
Thx for help
TorstenSolver is an AddIn that is not installed in a typical Excel installation. If you attempt to run it from the menu, it will prompt that it needs to be installed. This could be what is causing this error. Run the Solver from the menu and check that it is able to run manually.
After that, check the parameters carefully to make sure that you are not giving the Solver a bad cell reference or an invalid parameter.
Michael Munroe
www.abcdef.biz
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector -
Hi,
I am using a CAN bus to control signal from my PC. When i run the program it gives me an error " A PCAN Channel has not been initialized yet or the initialization process has failed ". Is there anyone who can tell me how to remove this error because i am stuck with this problem.So you have a problem with your PCAN hardware (Non NI hardware) ?
Have you connected/plugged in your PCAN dongle ?
Is it looking for the right port? -
Code to get the all Records in Work Book
Hi,
I have a Report to show on work book, Now I am used REFERENCE to get the data.
In Work book i have used formula for one cell and i draged that to few rows(for example 100).
Here my problem
If i get below 100 records there is no problem, if it exceds 100 i won't get the records.
some times I get in my result <b>REFF #</b>
to solve this problems any macro code or any other solution?
cause my report is dynamic report some times it give 1000 records some times 100, it should be automatically .
i know dragging the cell poor quality of coding.
any code which help my problem will be appreciated.
Thanks
PriyaHi Priya,
I do not understand the problem. Please show the formula you are using.
Does the REF# problem occur when you first put the formula in the cells, or only after the query is refreshed?
If the former, you have an Excel problem. If the latter, the problem is that BW will delete the old query result table before it inserts the new query result table, and the REF# means that the reference cells were deleted. In this case, the solution is simple and a simple macro will fix the problem for you.
I can help you if I understand which problem you are having.
- Pete -
Hi friends,
i have a requirement to add 2 columns in a query, i know there are some posts regarding this issues but i did not found any suitable answer for this, this will be solved by using some macros in BEX, can any one pls send coding for that.
points will be awarded,
thanks,
pavan,>i need to add two char info objects in query please tell me >how?pls gurus solve my problem.
If the object exists in the data provider then, there is nothing you really need to do except to drag and drop them in the column. But if the objects are not in the data provider and you need to add some logic to it, then you need to create some calculated key figure or Restricted Key figure or Formula to put your logic in and if it is CKF or RKF then drop it in the column section. Everything depends on the availability of the InfoObject in the data provider.
thanks.
Wond -
Can I use Word for Mac 2004 to write basic solver/Macros programs?
I just bought the new macbook aluminum unibody. I am in college and am taking computer programming in fall, I need to be able to write basic programs that utilize macros and solver. I spoke with one mac person who told me I would need to buy parallels, the microsoft OS and then microsoft word for Microsoft OS.
However, that costs upwards of 200$ for a class I am only going to be taking for 2 months. Someone else has told me that the 2004 version of Word for Mac has macros abilities on it (those that are not on the current version, but that the 2011 version will have). Can I just use the 2004 version? Or does anyone have other suggestions?Office 2004 and Other Applications Don't Work in Lion/Mountain Lion
If you have Office 2004 which is a PPC-only suite, it will not work in Lion/Mountain Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
As for other software, any PPC-based software will not run in Lion or Mountain Lion because Rosetta is no longer part of OS X. You will need to upgrade to Intel versions of the software.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.) -
Cannot run the macro SOLVER.XLAM!MainEx error message
Ive had this problem for awhile but am now needing to use solver for my schoolwork.
Anytime i try to use the solver function under the data tab this error message pops up.
I have tried taking off and readding the add-in under options.
when i try to access solver in the visual basic panel it asks for a password which i have never set
Im running excel 2013 on windows 7
I have tried many things and am exhausted. No solution has been posted to this problem on the site or anywhere on the web
THIS IS NOT WHEN IM TYPING MACRO CODE IN VBA. its just when i try to use solver for simple spreadsheet calculations.
when i click solver i get the error cannot run module: SolverCode
when i try to access the solver code in vba a password is requiredHi,
As far as I know, the Solver add-in code has the password by design, it is protected on purpose and copyrighted. They are designed for use from the spreadsheet only.
Then, as the error message:" Cannot run the macro SOLVER.XLAM!MainEx error message." Please try to do the following methods to fix the issue:
1. Open VBE (Alt+F11)>Click Tools> References>set to SOLVER>Show immediate code pane (Ctrl+G)>Copy/paste (or write): application.run "solver.xlam!auto_open"
2. Disable the other Excel add-ins, such as
Adobe PDFMaker.
3. Repair Office 2013.
Regards,
George Zhao
TechNet Community Support -
[SOLVED?] Problem with multi key macros in emacs
I recently made the switch from gentoo to arch, for the most part everything is up and working. The only thing I am having a problem with is GNU emacs, for some reason i can't use some macros that need more than 2 keys to be pressed. For example M-< will not work but for some reason C-_ will. I haven't got the faintest clue as to what the problem is. I am running xfce and using the us keyboard layout. If i run emacs outside of X than all the macros work fine. Any ideas?
Thanks in advance.
Last edited by flarkis (2010-03-01 22:57:24)seeing as this problem persists in both the terminal and gui versions i don't think that is possible. I also tried running both versions in twm to see if anything was different. The keys still aren't seen correctly but this time they are replaced with random characters that are not part of my keymap. An X11 problem or keyboard configuration problem?
<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>
<!-- If we're using Linux, we use evdev by default (falling back to
keyboard otherwise). -->
<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">us</merge>
<merge key="input.xkb.variant" type="string" />
</match>
</device>
</deviceinfo>
Last edited by flarkis (2010-02-25 03:28:08) -
[SOLVED] Huawei E173s-1 mobile broadband dongle not working
Update: check the wiki entry at https://wiki.archlinux.org/index.php/Huawei_E173s
Hi,
My dongle works out-of-the-box in Ubuntu but I can't get it to work in Arch Linux.
I followed the instructions from this site: http://www.vivaolinux.com.br/dica/Modem … s-no-Linux
/etc/usb_modeswitch.d/12d1:1c0b
DefaultVendor=0x12d1
DefaultProduct=0x1c0b
TargetVendor=0x12d1
TargetProduct=0x1c05
CheckSuccess=20
MessageEndpoint=0x0f
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
/usr/lib/udev/rules.d/40-usb_modeswitch.rules
ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1c0b", RUN+="usb_modeswitch '%b/%k'"
# usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1c0b
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 003 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
SCSI inquiry data (for identification)
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
USB description data (for identification)
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
Setting up communication with interface 0
Using endpoint 0x0f for message sending ...
Trying to send message 1 to endpoint 0x0f ...
OK, message successfully sent
Resetting response endpoint 0x8f
Resetting message endpoint 0x0f
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
found matching product ID
adding device
Found target device, now opening
Found correct target device
Mode switch succeeded. Bye.
# modprobe usbserial vendor=0x12d1 product=0x1c0b
But when I run wvdialconf it can't find the modem:
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at [url]http://alumnit.ca/wiki/?WvDial[/url]
As a result I'm stuck with Ubuntu for the time being. ;( Any help would be very appreciated.
Edit: running sakis3g after doing the above I was able to connect but I'd still love to know how to to make it work manually with wvdial.
Last edited by jasewobble (2012-04-22 22:25:22)Hi
Thanks for the advice above. Initially cleaned off original app
I removed the software application from Mac HD/Applications/Orange Mobile Partner
The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
Was about to try and return the dongle, but now after several tests, am sure it works
Another Apple Discussion Board success -
Peak Time Issues & Unable to Speedtest
Over the past few months I have had issues with my broadband sync and speed so much so that I complained and have been dealing with the exec level tech team in Newcastle. Who seem to think they have solved my issues but clearly have not...
Although my router is syncing at 7008kbs, on a night from say 6pm-8am my speeds drop right down to 2/3 meg and and at somepoints even unable to surf at all. I have a samknows ofcom monitoring unit on my line that shows my line is so up and down and how bad the BT DNS servers are, but even that is not unable to log test at peak times due to the poor service.
To make matters worst when I try and do a BTspeedtest, it says that both my phone number or my service id (got this from BTW when I had issues) are not authorised to do any test. I have been having issues on and off now from mid Feb, and its starting to really hack me off!!
If anyone can suggest anything I am fed up of going around and around with the tech team in Newcastle and BTW..
My stats:
Mode: G.DMT
Channel: Interleave
Trellis: ON
Line Status: No Defect
Training Status: Showtime
Down / Up
SNR (dB): 6.6 20.0
Attn(dB): 44.0 23.5
Pwr(dBm): 19.8 12.3
Max(Kbps): 7552 1080
Rate (Kbps): 7008 448
Mode: G.DMTChannel: InterleaveTrellis: ONLine Status: No DefectTraining Status: Showtime Down UpSNR (dB): 6.6 20.0Attn(dB): 44.0 23.5Pwr(dBm): 19.8 12.3Max(Kbps): 7552 1080Rate (Kbps): 7008 448Thanks for the reply, yeah my sync stays solid the snr goes down a little to about 5.9/6 but I keep the sync its just the throughput. ELC gave me a pin to use if I need to call them and an email, but they said the issue before was a VP issue which has now been resolved. I sent them my sam knows stats card from the monitoring unit that shows how up and down my throughput is but they said unless my sync drops this is normal for an "adaptive line" and it sucks because I can not do any speedtest..
Also the BT speedtester says that my phone number is not autorised to do a test and my BBIP service id number is not valid?
I have just done a speedtest now via speedtest.net that said my throughput was 5864 ( which is about right for a IP profile of 6000) but later its faster to download using my mifi dongle lol
any suggesttions would be most helpful -
Hello Experts,
I am creating a macro, where the requirement is; user would select few columns of a KF & hit on a macro.
The values in the KF should get multiplied by 2.
Any clue how should I add ( *2) functionality in operation / function ?. Any other suggestion is welcomed.
Please help
Regards
Rahul ChitteHi Rahul,
You can set the macro to run for few period.
1) In the step of the macro, select the period you want to run
2) Within the step, Results row (Key figure row 'XXX") = Key figure row 'XXX" * 2 (remember to maintain a space between * and 2)
3) Check the macro for any error, which would help you for any inconsistencies
4) activate the macro to test your requirement.
hope this would solve your requirment.
Regards,
Nawanit -
Dear all,
I have a couple of Word templates (in document libraries) that should have the filename and page count on the footer of the front page. It seams there is an issue with Word that these do not automatically update (MS kb 832897).
I am using word 2010, 64 bits.
This is solved with a Macro.
When placing the word with macro template in SharePoint, SP blocks it and the macros are not ran.
Any one with experience on this?
Thanks in advance.
GonçaloIt is not possible to run a macro in SharePoint after the document has been uploaded.
You can replicate this scenario by creating a SPItemEventReceiver which will run customized code on ItemAdded in your document library.
Please go through the following articles for details:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spitemeventreceiver.aspx
http://msdn.microsoft.com/en-us/library/office/ms437502%28v=office.14%29.aspx
Please don't forget to mark it answered, if your problem resolved or helpful. -
How to call HR Macros in ABAP-Webdynpro
HI all,
I want to extract HR data in webdynpro view.
Where should I give Logical Database PNP?
The ifnotypes key word is not accepting in Webdynpro coding?
Where should I give GET PERNR event in Webdynpro?
When I use RP_PROVIDE_FROM_LAST .... says error message
Statement "RP_PROVIDE_FROM_LAST" is not defined. Check your spelling .
How to use the Macros in Webdynpro (VIEW) methods.
First time I'm working in ABAP-HR Webynpro.
Please help me out..
Thanks,
PrasadHi,
How did u solve this? pls provide the solution.
Regards,
Lakshmi. -
[SOLVED] unable to play mp3 or flac files in mpd, .dts files play fine
I had a perfect running mpd setup before I tried to fiddle around with some dependancies to get xbmc-svn to compile without errors. I installed some AUR packages (ffmpeg-svn, x264-git, libva-sds, libvpx, libid3tag).
After that I started to experience trouble with mpd, it start fine and says it plays audio files just fine but whenever i play a mp3 or flac file the progress bar just looks like it's playing the file but I hear no sound. Whenever I play a .dts file i hear the sound correct.
I'm very curious to why this happends.
I rolled back the packages mentioned above but the issue remains unsolved.
My setup: pc is connected to receiver by hdmi cable using the latest alsa version with digital passthrough over hdmi, currently using mpd-git from AUR
mpd -v --no-daemon shows the following:
# mpd -v --no-daemon /etc/mpd.conf
config: loading file /etc/mpd.conf
listen: binding to address for 192.168.1.3
listen: binding to socket address 192.168.1.3:6600
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: writing pid file
snippet from mpd.log:
Jun 28 00:54 : client: [0] process command "playlistfind filename "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "addid "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : add to playlist: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : database: get song: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "playid "7""
Jun 28 00:54 : playlist: play 7:"Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3"
Jun 28 00:54 : decoder_thread: clearing mixramp tags
Jun 28 00:54 : decoder_control: mixramp_start = NULL
Jun 28 00:54 : decoder_control: mixramp_prev_end = NULL
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "status"
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "idle"
Jun 28 00:54 : client: [0] command returned 1
Jun 28 00:54 : client: [0] process command "playlistid "7""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : mad: detected LAME version 3.97 ("LAME3.97 ")
Jun 28 00:54 : mad: LAME peak found: 0.000000
Jun 28 00:54 : mad: LAME track gain found: -5.000000
Jun 28 00:54 : mad: encoder delay is 576, encoder padding is 1818
Jun 28 00:54 : decoder: audio_format=44100:24:2, seekable=true
Jun 28 00:54 : alsa: default period_time = buffer_time/4 = 185759/4 = 46439
Jun 28 00:54 : client: [0] process command "plchangesposid "2""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : alsa: buffer_size=8192 period_size=2048
Jun 28 00:54 : output: opened plugin=alsa name="My ALSA Device" audio_format=44100:32:2
Jun 28 00:54 : output: converting from 44100:24:2
Jun 28 00:54 : Failed to open mixer for 'My ALSA Device': no such mixer control: PCM
mpd.conf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/media/media9/Muziek/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "mpd"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "192.168.1.3"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "verbose"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# #music_directory "path_to_your_music_collection"
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured #music_directory "path_to_your_music_collection"
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured #music_directory "path_to_your_music_collection"
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,3" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "Master" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
Whenever I run xbmc using the hdmi digital output it just plays mp3 and flac files without problems.
Anyone any clues on how to solve this issue?
TIA, dafart
Since
Last edited by dafart (2010-07-01 00:38:09)aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Which correspondents fine with the
device "hw:0,3"
in my mpd.conf alsa section.
Also sound worked fine withh this config before I started installing ffmpeg-svn and alikes
hokasch:
I tried changing the mixer to "Master" but that did not change much. -
How to upload data from excel to SAP using VB script or Macros
Hi Guys,
I want to make a macro enabled Excel sheet which i can use to upload huge data on SAP . I read some discussion but didnt get anything. Please help me with a step by step document.Hi,
Please refer below link.
Need help from Excel and SAP expert! [SOLVED]
http://visualbasic.ittoolbox.com/groups/technical-functional/vb-vba-l/call-transaction-in-sap-from-excel-vba-macro-and-download-alv-list-object-results-to-spreadsheet-3335996
Regards,
Rafi
Maybe you are looking for
-
Sharepoint server search service error starting
hi, we have two server for team foundation server. server1 installed: Team foundation server 2012, Sharepoint 2013, MSSQL 2008 r2 on windows server 2012 standart server2 installed: team foundation build server on windows server 2012 standart sharepoi
-
Sorry if this is a bit naive. I have just bought my first iPad (Retina Display). I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc. How does one connect to the web (Google) when one i
-
SQL> create or replace function my_func 2 return boolean as 3 x boolean; 4 begin 5 x := true; 6 return x; 7 end; 8 / Function created. SQL> select my_func from dual; select my_func from dual ERROR at line 1: ORA-06552: PL/SQL: Statement ignored ORA-0
-
Weird mouse and keyboard events windows 7 @g550
My windows 7, on laptop lenovo g550 behaves weirdly lately. After some casual run time i can't right click on desktop, start button doesn't respond, if i switch users and log in back to my user goes back to normal. Sometimes "c" or "v" keys do nut re
-
Flash Builder 4 standalone on win7 64bit is broken after update
Today Adobe Updater promted that there are updates for Adobe Flash Builder 4 and Photoshop CS5. The update downloaded and installed without any errors and Photoshop is still working fine for me. But when I open Flash Builder I get a bunch of error me