[SOLVED] Problem with full system backup with rsync

Hello,
I made a backups by following this page:
https://wiki.archlinux.org/index.php/Fu … with_rsync
Then I copied it to another computer, edited grub and fstab and it's almost works.
Commands su and sudo produces:
Cannot set groups, operation not allowed.
Maybe I must change permission of some file in system, because I backup system first to ntfs disk.
And I copied it as root, so it have only root permissions. But I don't know which files must I change.
Thanks
Last edited by KSJ (2013-07-21 18:40:59)

KSJ wrote:Maybe I must change permission of some file in system, because I backup system first to ntfs disk.
And I copied it as root, so it have only root permissions. But I don't know which files must I change.
Best not to try. If you backed up to NTFS, the best thing to do is to reinstall and then copy over stuff from your home, crucial config files etc. You will need to adjust ownership and permissions appropriately for everything you copy over from the backup.
NTFS does not preserve ownership and permissions.
Of course, if you still have your original installation, you can make a new backup instead. Just make sure to use a suitable filesystem.
Last edited by cfr (2013-05-24 00:52:17)

Similar Messages

  • Problem following full system backup recovery from TM

    Hi All,
    In addition to other Mac computers I also own an iMac G5. The original hard drive that came with the machine was starting to show signs of "fatigue" so I decided to get a replacement drive.
    After putting in the new drive (500gb) I booted my computer using the Leopard install DVD and selected the "restore from time machine backup" under utilities. I went through the process of finding my time capsule->backup->restoring the full thing. I left it going over night so I don't actually know how long it took. Nevertheless, in the morning the process was done. Happily, I restarted my mac and got the grey screen with the apple logo in the middle. The spinning progress circle appeared and started going around. After ~10-15 seconds the screen went black and the mac rebooted itself. The same thing happened over and over and the only way to stop this was to physically turn off the computer.
    Here is some additional information for those with a good idea what is going on:
    1) If I install a clean Leopard system everything works. The system gets installed and the computer boots normally.
    2) After restoring from time capsule (computer continues to reboot itself) I tried doing an "archive and install" from the install DVD. I reasoned that the problem likely lies somewhere within the system booting process so if that is corrupted in one way or the other putting only a new system (and archiving the old one) may allow me to boot the machine and access my user data. Long story, after going through the full recovery process I get an error that the system was installed but that there was some error so the user information could not be used. Regardless, the computer still continuously reboots itself upon startup.
    3) I ran Diskwarrior on the recovered time capsule backup. Some very minor errors were found and corrected in personal files that have nothing to do with the boot process (actually, files I have not touched in ages). Directory structure etc. was fine. This did not help however to solve the problem.
    4) If I boot my Mac in "safe" or "verbose" mode the screen goes black and I start getting the details of the boot process. (I do not have a copy of the text). Rather quickly it reaches a point where it say something about the HD. It seems to be checking something since the process is "hanging". Afterwards there is a whole quick list of things that the Mac goes through and then follows the dreaded reboot. This goes too fast to actually see what is the last step. (is there a way to slow/freeze the process?)
    Is there anyone out there that has an idea on how to solve this issue?
    thanks
    iMac G5 Mac OS X (10.5.5) 1GB RAM

    Thanks for your post.
    I did forget to mention in my initial post that I did try to recover my time machine backup from older dates. I tried a backup from one week, one month, and two months ago. The problem persists.
    I am avoiding the second option you raised (installing a clean system and migrating my data) and keeping that as a last option. The main reason is that in addition to the data I have I would like to avoid having to install all the applications.
    If worse comes I'll take that route. Hopefully, a good suggestion will come up.

  • [SOLVED] Problems after full system update

    Hi, today i've issued pacman -Syu and after reboot, my X refuses to start (says it has no device) and also i have no network interfaces, just loopback. Everything worked well before update. Any ideas?
    Last edited by ancrouter (2011-10-21 15:11:30)

    ancrouter wrote:Strange... i've just updated again to latest linux-3.0.7-1 package, and everything works fine. There had to be some problem during updating.
    You could have run
    lsinitcpio -a /boot/initramfs-linux.img
    on the old image to see what modules did it include.
    Re-running mkinitcpio probably generated a correct image so it's working now.

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • [Solved] Problem with upgrading polkit or filesystem

    Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
    A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit"  So I tried that a couple of times but I could never get pacman to finish and get past that.  I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it).  So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue.  Fast forward to today and I go to upgrade my system.  Among the 83 updates or so was polkit and filesystem.  What do you know it gets stuck at "(15/83) upgrading polkit".  Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem.  I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
    I tried re-installing polkit again and filesystem again but they continue to get stuck.  I cannot "complete" the upgrade even though they show the appropriate version when I check.
    Terminal
    [507] shauder@arch-desktop [~] $ sudo pacman -S polkit
    warning: polkit-0.107-4 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): polkit-0.107-4
    Total Installed Size: 1.77 MiB
    Net Upgrade Size: 0.00 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [########################################################] 100%
    (1/1) loading package files [########################################################] 100%
    (1/1) checking for file conflicts [########################################################] 100%
    (1/1) checking available disk space [########################################################] 100%
    (1/1) upgrading polkit
    /var/log/pacman.log
    [2012-07-18 18:27] installed filesystem (2012.6-4)
    [2012-07-18 18:27] installed findutils (4.4.2-4)
    [2012-07-18 18:27] installed gawk (4.0.1-1)
    [2012-07-18 18:27] installed gettext (0.18.1.1-4)
    [2012-07-18 18:27] installed grep (2.13-2)
    [2012-07-18 18:27] installed sed (4.2.1-4)
    [2012-07-18 18:27] installed grub (0.97-21)
    [2012-07-18 18:27] installed gzip (1.5-1)
    [2012-07-18 18:27] installed gdbm (1.10-1)
    [2012-07-18 18:27] installed perl (5.16.0-2)
    [2012-07-18 18:27] installed openssl (1.0.1.c-1)
    [2012-07-18 18:27] installed libsasl (2.1.23-9)
    [2012-07-18 18:27] installed libldap (2.4.31-4)
    [2012-07-18 18:27] installed keyutils (1.5.5-3)
    [2012-07-18 18:27] installed krb5 (1.10.2-2)
    [2012-07-18 18:27] installed heirloom-mailx (12.5-3)
    [2012-07-18 18:27] installed inetutils (1.9.1-2)
    [2012-07-18 18:27] installed iproute2 (3.4.0-2)
    [2012-07-18 18:27] installed sysvinit (2.88-6)
    [2012-07-18 18:27] installed initscripts (2012.06.3-2)
    [2012-07-18 18:27] installed sysfsutils (2.1.0-8)
    [2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
    [2012-07-18 18:27] installed iputils (20101006-4)
    [2012-07-18 18:27] installed jfsutils (1.1.15-3)
    [2012-07-18 18:27] installed less (444-3)
    [2012-07-18 18:27] installed licenses (2.9-1)
    [2012-07-18 18:27] installed linux-firmware (20120625-1)
    [2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
    [2012-07-18 18:27] installed expat (2.1.0-1)
    [2012-07-18 18:27] installed libarchive (3.0.4-1)
    [2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
    [2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
    [2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-18 18:27] ==> Building image from preset: 'default'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [autodetect]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] ==> Building image from preset: 'fallback'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] installed linux (3.4.5-1)
    [2012-07-18 18:27] installed logrotate (3.8.1-2)
    [2012-07-18 18:27] installed lvm2 (2.02.96-3)
    [2012-07-18 18:27] installed texinfo (4.13a-7)
    [2012-07-18 18:27] installed groff (1.21-2)
    [2012-07-18 18:27] installed libpipeline (1.2.1-1)
    [2012-07-18 18:27] it's recommended to create an initial
    [2012-07-18 18:27] database running as root:
    [2012-07-18 18:27] "/usr/bin/mandb --quiet"
    [2012-07-18 18:27] installed man-db (2.6.2-1)
    [2012-07-18 18:27] installed man-pages (3.41-1)
    [2012-07-18 18:27] installed mdadm (3.2.5-2)
    [2012-07-18 18:27] installed nano (2.2.6-2)
    [2012-07-18 18:27] installed ca-certificates (20120623-1)
    [2012-07-18 18:27] installed libssh2 (1.4.2-1)
    [2012-07-18 18:27] installed curl (7.26.0-1)
    [2012-07-18 18:27] installed pth (2.0.7-4)
    [2012-07-18 18:27] installed libksba (1.2.0-2)
    [2012-07-18 18:27] installed libassuan (2.0.3-1)
    [2012-07-18 18:27] installed pinentry (0.8.1-4)
    [2012-07-18 18:27] installed dirmngr (1.1.0-4)
    [2012-07-18 18:27] installed gnupg (2.0.19-2)
    [2012-07-18 18:27] installed gpgme (1.3.1-4)
    [2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
    [2012-07-18 18:27] installed archlinux-keyring (20120622-1)
    [2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
    [2012-07-18 18:27] >>> to import the data required by pacman for package verification.
    [2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
    [2012-07-18 18:27] installed pacman (4.0.3-3)
    [2012-07-18 18:27] installed pciutils (3.1.10-1)
    [2012-07-18 18:27] installed pcmciautils (018-4)
    [2012-07-18 18:27] installed libnl (3.2.11-1)
    [2012-07-18 18:27] installed libusbx (1.0.12-2)
    [2012-07-18 18:27] installed libpcap (1.3.0-1)
    [2012-07-18 18:27] installed ppp (2.4.5-3)
    [2012-07-18 18:27] installed procps-ng (3.3.3-3)
    [2012-07-18 18:27] installed psmisc (22.19-1)
    [2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
    [2012-07-18 18:27] installed shadow (4.1.5.1-1)
    [2012-07-18 18:27] installed eventlog (0.2.12-3)
    [2012-07-18 18:27] installed syslog-ng (3.3.5-2)
    [2012-07-18 18:27] installed tar (1.26-2)
    [2012-07-18 18:27] installed usbutils (006-1)
    [2012-07-18 18:27] installed vi (1:050325-2)
    [2012-07-18 18:27] installed wget (1.13.4-1)
    [2012-07-18 18:27] installed which (2.20-5)
    [2012-07-18 18:27] installed dbus-core (1.6.2-2)
    [2012-07-18 18:27] installed wpa_supplicant (1.0-1)
    [2012-07-18 18:27] installed xfsprogs (3.1.8-2)
    [2012-07-18 18:27] installed m4 (1.4.16-2)
    [2012-07-18 18:27] installed autoconf (2.69-1)
    [2012-07-18 18:27] installed automake (1.12.2-1)
    [2012-07-18 18:27] installed binutils (2.22-9)
    [2012-07-18 18:27] installed bison (2.5.1-1)
    [2012-07-18 18:27] installed fakeroot (1.18.4-1)
    [2012-07-18 18:27] installed flex (2.5.35-5)
    [2012-07-18 18:27] installed mpfr (3.1.1-1)
    [2012-07-18 18:27] installed libmpc (0.9-2)
    [2012-07-18 18:27] installed isl (0.10-1)
    [2012-07-18 18:27] installed cloog (0.17.0-2)
    [2012-07-18 18:27] installed ppl (1.0-1)
    [2012-07-18 18:27] installed gcc (4.7.1-4)
    [2012-07-18 18:27] installed libltdl (2.4.2-6)
    [2012-07-18 18:27] installed libtool (2.4.2-6)
    [2012-07-18 18:27] installed make (3.82-4)
    [2012-07-18 18:27] installed patch (2.6.1-3)
    [2012-07-18 18:27] installed pkg-config (0.27-1)
    [2012-07-18 18:37] Running 'pacman -Syy'
    [2012-07-18 18:37] synchronizing package lists
    [2012-07-18 18:38] Running 'pacman -Syy'
    [2012-07-18 18:38] synchronizing package lists
    [2012-07-18 18:39] Running 'pacman -S sudo'
    [2012-07-18 18:43] Running 'pacman -S sudo'
    [2012-07-18 18:44] Running 'pacman -S sudo'
    [2012-07-18 18:44] installed sudo (1.8.5.p2-1)
    [2012-07-18 18:45] Running 'pacman -S alsa-utils'
    [2012-07-18 18:46] installed alsa-lib (1.0.25-1)
    [2012-07-18 18:46] installed dialog (1.1_20120706-1)
    [2012-07-18 18:46] installed libogg (1.3.0-1)
    [2012-07-18 18:46] installed flac (1.2.1-3)
    [2012-07-18 18:46] installed libvorbis (1.3.3-1)
    [2012-07-18 18:46] installed libsndfile (1.0.25-2)
    [2012-07-18 18:46] installed libsamplerate (0.1.8-1)
    [2012-07-18 18:46] installed alsa-utils (1.0.25-3)
    [2012-07-18 18:46] Running 'pacman -S alsa-plugins'
    [2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
    [2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
    [2012-07-18 18:48] installed xproto (7.0.23-1)
    [2012-07-18 18:48] installed libxdmcp (1.1.1-1)
    [2012-07-18 18:48] installed freetype2 (2.4.10-1)
    [2012-07-18 18:48] installed libfontenc (1.1.1-1)
    [2012-07-18 18:48] installed fontsproto (2.1.2-1)
    [2012-07-18 18:48] installed libxfont (1.4.5-1)
    [2012-07-18 18:48] installed libpciaccess (0.13.1-1)
    [2012-07-18 18:48] installed libdrm (2.4.37-1)
    [2012-07-18 18:48] installed pixman (0.26.2-1)
    [2012-07-18 18:48] installed libxau (1.0.7-1)
    [2012-07-18 18:48] installed xcb-proto (1.7.1-1)
    [2012-07-18 18:48] installed libxcb (1.8.1-1)
    [2012-07-18 18:48] installed kbproto (1.0.6-1)
    [2012-07-18 18:48] installed libx11 (1.5.0-1)
    [2012-07-18 18:48] installed libxkbfile (1.0.8-1)
    [2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
    [2012-07-18 18:48] installed xkeyboard-config (2.6-1)
    [2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
    [2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
    [2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
    [2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
    [2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
    [2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
    [2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
    [2012-07-18 18:48] installed xorg-font-utils (7.6-3)
    [2012-07-18 18:48] updating font cache... done.
    [2012-07-18 18:48] installed fontconfig (2.8.0-2)
    [2012-07-18 18:49] Updating font cache... done.
    [2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
    [2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
    [2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
    [2012-07-18 18:49] installed xorg-server (1.12.3-1)
    [2012-07-18 18:49] installed xextproto (7.2.1-1)
    [2012-07-18 18:49] installed libxext (1.3.1-1)
    [2012-07-18 18:49] installed libice (1.0.8-1)
    [2012-07-18 18:49] installed libsm (1.2.1-1)
    [2012-07-18 18:49] installed libxt (1.1.3-1)
    [2012-07-18 18:49] installed libxmu (1.1.1-1)
    [2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
    [2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
    [2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
    [2012-07-18 18:49] installed renderproto (0.11.1-2)
    [2012-07-18 18:49] installed libxrender (0.9.7-1)
    [2012-07-18 18:49] installed randrproto (1.3.2-2)
    [2012-07-18 18:49] installed libxrandr (1.3.2-2)
    [2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
    [2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
    [2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
    [2012-07-18 18:49] installed inputproto (2.2-1)
    [2012-07-18 18:49] installed libxi (1.6.1-1)
    [2012-07-18 18:49] installed xineramaproto (1.2.1-2)
    [2012-07-18 18:49] installed libxinerama (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
    [2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
    [2012-07-18 18:49] installed mcpp (2.7.2-4)
    [2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
    [2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
    [2012-07-18 18:49] installed xorg-xset (1.2.2-1)
    [2012-07-18 18:49] installed fixesproto (5.0-2)
    [2012-07-18 18:49] installed libxfixes (5.0-2)
    [2012-07-18 18:49] installed libxcursor (1.1.13-1)
    [2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
    [2012-07-18 18:49] installed xorg-server-utils (7.6-3)
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
    [2012-07-18 18:51] installed videoproto (2.3.1-2)
    [2012-07-18 18:51] installed libxv (1.0.7-1)
    [2012-07-18 18:51] installed libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed nvidia-utils (302.17-1)
    [2012-07-18 18:51] In order to use nvidia module, reboot the system.
    [2012-07-18 18:51] installed nvidia (302.17-3)
    [2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
    [2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
    [2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
    [2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
    [2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
    [2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
    [2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
    [2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
    [2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
    [2012-07-18 18:55] installed xorg-twm (1.0.7-1)
    [2012-07-18 18:55] installed libxpm (3.5.10-1)
    [2012-07-18 18:55] installed libxaw (1.0.11-1)
    [2012-07-18 18:55] installed libxft (2.3.1-1)
    [2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
    [2012-07-18 18:55] installed xorg-luit (1.1.1-1)
    [2012-07-18 18:55] installed xbitmaps (1.1.1-2)
    [2012-07-18 18:55] installed xterm (281-1)
    [2012-07-18 18:55] Running 'pacman -S dbus'
    [2012-07-18 18:55] installed dbus (1.6.2-1)
    [2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
    [2012-07-18 18:56] installed ttf-dejavu (2.33-3)
    [2012-07-18 18:57] Running 'pacman -S awesome'
    [2012-07-18 18:57] installed libpng (1.5.11-1)
    [2012-07-18 18:57] installed cairo (1.12.2-2)
    [2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
    [2012-07-18 18:57] installed libtiff (4.0.2-1)
    [2012-07-18 18:57] installed giflib (4.1.6-5)
    [2012-07-18 18:57] installed libid3tag (0.15.1b-7)
    [2012-07-18 18:57] installed imlib2 (1.4.5-2)
    [2012-07-18 18:57] installed libev (4.11-1)
    [2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
    [2012-07-18 18:57] installed lua (5.1.5-2)
    [2012-07-18 18:57] installed libdatrie (0.2.5-1)
    [2012-07-18 18:57] installed libthai (0.1.17-1)
    [2012-07-18 18:57] installed pango (1.30.1-1)
    [2012-07-18 18:57] installed xcb-util (0.3.9-1)
    [2012-07-18 18:57] installed startup-notification (0.12-3)
    [2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
    [2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
    [2012-07-18 18:57] installed awesome (3.4.13-1)
    [2012-07-18 18:58] Running 'pacman -S rlwrap feh'
    [2012-07-18 18:58] installed rlwrap (0.37-2)
    [2012-07-18 18:58] installed giblib (1.2.4-5)
    [2012-07-18 18:58] installed libexif (0.6.20-2)
    [2012-07-18 18:58] installed feh (2.5-1)
    [2012-07-18 18:59] Running 'pacman -S packer'
    [2012-07-18 18:59] Running 'pacman -S lightdm'
    [2012-07-18 19:01] Running 'pacman -S fakeroot'
    [2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
    [2012-07-18 19:08] Running 'pacman -S git'
    [2012-07-18 19:08] installed perl-error (0.17018-1)
    [2012-07-18 19:08] installed git (1.7.11.2-1)
    [2012-07-18 19:08] Running 'pacman -S jshon'
    [2012-07-18 19:08] installed jansson (2.3-1)
    [2012-07-18 19:08] installed jshon (20111222-1)
    [2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
    [2012-07-18 19:08] installed packer (20120718-1)
    [2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
    [2012-07-18 19:10] installed polkit (0.105-1)
    [2012-07-18 19:10] installed accountsservice (0.6.22-1)
    [2012-07-18 19:10] installed dbus-glib (0.100-1)
    [2012-07-18 19:10] installed sqlite (3.7.13-1)
    [2012-07-18 19:10] installed python2 (2.7.3-2)
    [2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
    [2012-07-18 19:10] installed perl-xml-parser (2.41-3)
    [2012-07-18 19:10] installed intltool (0.50.2-1)
    [2012-07-18 19:10] installed libxml2 (2.7.8-2)
    [2012-07-18 19:10] installed itstool (1.1.2-1)
    [2012-07-18 19:10] installed iso-codes (3.34-1)
    [2012-07-18 19:10] installed libxklavier (5.2.1-2)
    [2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
    [2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
    [2012-07-18 19:14] installed lightdm (1.3.1-4)
    [2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
    [2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
    [2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
    [2012-07-18 19:15] installed bzr (2.5.1-1)
    [2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
    [2012-07-18 19:15] installed libxslt (1.1.26-3)
    [2012-07-18 19:15] installed docbook-xml (4.5-5)
    [2012-07-18 19:15] installed rarian (0.8.1-2)
    [2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
    [2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
    [2012-07-18 19:15] installed gtk-doc (1.18-1)
    [2012-07-18 19:15] installed atk (2.4.0-1)
    [2012-07-18 19:15] installed compositeproto (0.4.2-2)
    [2012-07-18 19:15] installed libxcomposite (0.4.3-2)
    [2012-07-18 19:15] installed damageproto (1.2.1-2)
    [2012-07-18 19:15] installed libxdamage (1.1.3-2)
    [2012-07-18 19:15] installed shared-mime-info (1.0-1)
    [2012-07-18 19:15] installed libtasn1 (2.13-1)
    [2012-07-18 19:15] installed nettle (2.5-1)
    [2012-07-18 19:15] installed p11-kit (0.12-1)
    [2012-07-18 19:15] installed gnutls (3.0.21-1)
    [2012-07-18 19:15] installed libdaemon (0.14-2)
    [2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
    [2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
    [2012-07-18 19:15] ==> dbus needs to be running when you start it.
    [2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
    [2012-07-18 19:15] ==> configuration on dhcp-less networks.
    [2012-07-18 19:15]
    [2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
    [2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
    [2012-07-18 19:15] ==> twisted for avahi-bookmarks.
    [2012-07-18 19:15] installed avahi (0.6.31-3)
    [2012-07-18 19:15] installed libcups (1.5.3-5)
    [2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
    [2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
    [2012-07-18 19:15] installed gtk2 (2.24.10-3)
    [2012-07-18 19:15] installed gtk-engines (2.21.0-1)
    [2012-07-18 19:15] installed icu (49.1.2-1)
    [2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
    [2012-07-18 19:15] installed orc (0.4.16-1)
    [2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
    [2012-07-18 19:15] installed libproxy (0.4.7-2)
    [2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-18 19:15] installed glib-networking (2.32.3-1)
    [2012-07-18 19:15] installed libsoup (2.38.1-1)
    [2012-07-18 19:15] ==> aspell comes with no default dictionary
    [2012-07-18 19:15] installed aspell (0.60.6.1-1)
    [2012-07-18 19:15] installed hunspell (1.3.2-1)
    [2012-07-18 19:15] installed hspell (1.1-2)
    [2012-07-18 19:15] installed enchant (1.6.0-4)
    [2012-07-18 19:15] installed geoclue (0.12.0-5)
    [2012-07-18 19:15] installed libwebkit (1.8.1-1)
    [2012-07-18 19:15] installed vala (0.16.1-1)
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:47] Running 'pacman -R lightdm'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:49] removed libwebkit (1.8.1-1)
    [2012-07-18 19:49] removed geoclue (0.12.0-5)
    [2012-07-18 19:49] removed enchant (1.6.0-4)
    [2012-07-18 19:49] userdel: user lightdm is currently used by process 657
    [2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
    [2012-07-18 19:49] removed lightdm (1.3.1-4)
    [2012-07-18 19:49] removed libxklavier (5.2.1-2)
    [2012-07-18 19:49] removed dbus-glib (0.100-1)
    [2012-07-18 19:49] removed accountsservice (0.6.22-1)
    [2012-07-18 19:50] Running 'pacman -S chromium'
    [2012-07-18 19:50] installed dbus-glib (0.100-1)
    [2012-07-18 19:50] installed nspr (4.9.1-1)
    [2012-07-18 19:50] installed nss (3.13.5-1)
    [2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
    [2012-07-18 19:50] installed libevent (2.0.19-1)
    [2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
    [2012-07-18 19:50] installed libxss (1.2.2-1)
    [2012-07-18 19:50] installed desktop-file-utils (0.20-1)
    [2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
    [2012-07-18 19:50] installed chromium (20.0.1132.57-1)
    [2012-07-18 19:50] Running 'pacman -Sy abs'
    [2012-07-18 19:50] synchronizing package lists
    [2012-07-18 19:51] installed rsync (3.0.9-3)
    [2012-07-18 19:51] installed abs (2.4.3-2)
    [2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
    [2012-07-18 19:53] installed ca-certificates-java (20120608-1)
    [2012-07-18 19:53] installed recordproto (1.14.2-1)
    [2012-07-18 19:53] installed libxtst (1.2.1-1)
    [2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
    [2012-07-18 19:53] done.
    [2012-07-18 19:53] when you use a non-reparenting window manager
    [2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-07-18 19:53] /etc/profile.d/openjdk6.sh
    [2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
    [2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
    [2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
    [2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
    [2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
    [2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
    [2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
    [2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
    [2012-07-18 19:53] installed gperf (3.0.4-4)
    [2012-07-18 19:53] installed zip (3.0-3)
    [2012-07-18 19:53] installed unzip (6.0-6)
    [2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
    [2012-07-18 19:53] installed lzo2 (2.06-1)
    [2012-07-18 19:53] installed squashfs-tools (4.2-2)
    [2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
    [2012-07-18 19:53] installed libusb-compat (0.1.4-2)
    [2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
    [2012-07-18 19:54] installed erlang (R15B01-1)
    [2012-07-18 19:54] installed sdl (1.2.15-1)
    [2012-07-18 19:54] installed dri2proto (2.6-1)
    [2012-07-18 19:54] installed glproto (1.4.15-1)
    [2012-07-18 19:54] installed mesa (8.0.4-1)
    [2012-07-18 19:54] installed esdl (2:1.2-1)
    [2012-07-18 19:54] installed schedtool (1.3.0-2)
    [2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed pngcrush (1.7.31-1)
    [2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed repo (1.17-1)
    [2012-07-18 19:59] Running 'pacman -S terminator'
    [2012-07-18 19:59] installed vte-common (0.32.2-1)
    [2012-07-18 19:59] installed vte (0.28.2-3)
    [2012-07-18 19:59] installed libglade (2.6.4-3)
    [2012-07-18 19:59] installed python2-cairo (1.10.0-1)
    [2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
    [2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
    [2012-07-18 19:59] installed pygtk (2.24.0-3)
    [2012-07-18 19:59] installed terminator (0.96-1)
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:01] removed gcc-libs (4.7.1-4)
    [2012-07-18 20:01] removed binutils (2.22-9)
    [2012-07-18 20:01] removed gcc (4.7.1-4)
    [2012-07-18 20:01] removed libtool (2.4.2-6)
    [2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
    [2012-07-18 20:01] installed binutils-multilib (2.22-8)
    [2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
    [2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
    [2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
    [2012-07-18 20:01] installed lib32-ncurses (5.9-1)
    [2012-07-18 20:01] installed lib32-readline (6.2.003-1)
    [2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 20:07] Running 'pacman -S ssh'
    [2012-07-18 20:10] Running 'pacman -S ssh-keygen'
    [2012-07-18 20:10] Running 'pacman -S openssh'
    [2012-07-18 20:10] installed libedit (20120311_3.0-1)
    [2012-07-18 20:10] installed dnssec-anchors (20120422-1)
    [2012-07-18 20:10] installed ldns (1.6.13-1)
    [2012-07-18 20:10] installed openssh (6.0p1-3)
    [2012-07-18 20:11] Running 'pacman -S pbcopy'
    [2012-07-18 20:11] Running 'pacman -S copy'
    [2012-07-18 20:13] Running 'pacman -S gedit'
    [2012-07-18 20:13] installed lcms2 (2.3-2)
    [2012-07-18 20:13] installed libgusb (0.1.3-1)
    [2012-07-18 20:13] installed gd (2.0.36RC1-5)
    [2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
    [2012-07-18 20:13] installed libieee1284 (0.2.11-4)
    [2012-07-18 20:13] installed v4l-utils (0.8.8-1)
    [2012-07-18 20:13] installed net-snmp (5.7.1-3)
    [2012-07-18 20:13] NOTE
    [2012-07-18 20:13] ----
    [2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
    [2012-07-18 20:13] installed sane (1.0.22-9)
    [2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
    [2012-07-18 20:13] installed colord (0.1.21-2)
    [2012-07-18 20:13] installed gtk3 (3.4.3-1)
    [2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
    [2012-07-18 20:13] installed libpeas (1.4.0-2)
    [2012-07-18 20:13] installed enchant (1.6.0-4)
    [2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
    [2012-07-18 20:13] installed python2-gobject (3.2.2-1)
    [2012-07-18 20:13] installed dconf (0.12.1-2)
    [2012-07-18 20:13] installed gedit (3.4.2-1)
    [2012-07-18 20:15] Running 'pacman -S python'
    [2012-07-18 20:16] installed python (3.2.3-3)
    [2012-07-18 20:26] Running 'pacman -S xclip'
    [2012-07-18 20:26] installed xclip (0.12-3)
    [2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
    [2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
    [2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
    [2012-07-18 20:37] installed openal (1.14-1)
    [2012-07-18 20:37] installed lib32-openal (1.14-1)
    [2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
    [2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
    [2012-07-18 20:37] installed swt (3.7.2-1)
    [2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:50] The android group has been removed, install android packages as root.
    [2012-07-18 20:50] installed android-sdk (r20-2)
    [2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:54] The android group has been removed, install android packages as root.
    [2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
    [2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
    [2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
    [2012-07-18 21:10] Running 'pacman -S perl-switch'
    [2012-07-18 21:10] installed perl-switch (2.16-1)
    [2012-07-21 03:29] Running 'pacman -S flashplugin'
    [2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
    [2012-07-21 03:29] installed mozilla-common (1.4-3)
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
    [2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
    [2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
    [2012-07-21 03:32] Running 'pacman -S libvdpau'
    [2012-07-21 03:32] installed libvdpau (0.4.1-2)
    [2012-07-21 14:53] Running 'pacman -S gedit-common'
    [2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
    [2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:00] Running 'pacman -S gtk-icons'
    [2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
    [2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
    [2012-07-21 15:06] removed gedit (3.4.2-1)
    [2012-07-21 15:06] removed python2-gobject (3.2.2-1)
    [2012-07-21 15:06] removed libpeas (1.4.0-2)
    [2012-07-21 15:06] removed iso-codes (3.34-1)
    [2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
    [2012-07-21 15:06] removed enchant (1.6.0-4)
    [2012-07-21 15:06] removed dconf (0.12.1-2)
    [2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] removed libsoup (2.38.1-1)
    [2012-07-21 15:06] removed glib-networking (2.32.3-1)
    [2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-21 15:07] Running 'pacman -R wxgtk'
    [2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
    [2012-07-21 15:07] Running 'pacman -R libxt libsm'
    [2012-07-21 15:11] Running 'pacman -S ranger'
    [2012-07-21 15:11] installed ranger (1.5.4-1)
    [2012-07-21 15:32] Running 'pacman -S irssi'
    [2012-07-21 15:32] installed irssi (0.8.15-6)
    [2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
    [2012-07-24 20:20] installed sublime-text (2.0.1-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
    [2012-07-24 23:41] installed dropbox (1.4.11-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
    [2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
    [2012-07-24 23:41] installed dropbox-daemon (0.8-8)
    [2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
    [2012-07-24 23:48] installed dropbox-cli (1-12)
    [2012-07-24 23:49] Running 'pacman -S nautilus'
    [2012-07-24 23:56] Running 'pacman -S ranger'
    [2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman -Sy'
    [2012-07-25 00:23] synchronizing package lists
    [2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:25] installed gconf (3.2.5-2)
    [2012-07-25 00:25] installed libmng (1.0.10-4)
    [2012-07-25 00:25] installed qt (4.8.2-3)
    [2012-07-25 00:25] installed qtwebkit (2.2.2-1)
    [2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
    [2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:28] installed libpng12 (1.2.49-1)
    [2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:31] installed spotify (0.8.4.103-1)
    [2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman -Syy'
    [2012-07-29 16:58] synchronizing package lists
    [2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 17:00] installed gsm (1.0.13-7)
    [2012-07-29 17:00] installed lame (3.99.5-1)
    [2012-07-29 17:00] installed libasyncns (0.8-4)
    [2012-07-29 17:00] installed json-c (0.9-1)
    [2012-07-29 17:00] installed libpulse (2.1-1)
    [2012-07-29 17:00] installed libtheora (1.1.1-2)
    [2012-07-29 17:00] installed libglapi (8.0.4-2)
    [2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
    [2012-07-29 17:00] installed libegl (8.0.4-2)
    [2012-07-29 17:00] installed libva (1.1.0-1)
    [2012-07-29 17:00] installed libvpx (1.1.0-1)
    [2012-07-29 17:00] installed opencore-amr (0.1.3-1)
    [2012-07-29 17:00] installed openjpeg (1.5.0-1)
    [2012-07-29 17:00] installed rtmpdump (2.4-1)
    [2012-07-29 17:00] installed schroedinger (1.0.11-1)
    [2012-07-29 17:00] installed speex (1.2rc1-2)
    [2012-07-29 17:00] installed x264 (20120705-1)
    [2012-07-29 17:00] installed xvidcore (1.3.2-1)
    [2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
    [2012-07-29 17:00] installed libmms (0.6.2-1)
    [2012-07-29 17:00] installed libzen (0.4.26-1)
    [2012-07-29 17:00] installed libmediainfo (0.7.58-1)
    [2012-07-29 17:00] installed recode (3.6-7)
    [2012-07-29 17:00] installed enca (1.13-2)
    [2012-07-29 17:00] installed a52dec (0.7.4-6)
    [2012-07-29 17:00] installed libdca (0.0.5-3)
    [2012-07-29 17:00] installed talloc (2.0.7-1)
    [2012-07-29 17:00] installed libwbclient (3.6.6-1)
    [2012-07-29 17:00] installed libcap-ng (0.6.6-1)
    [2012-07-29 17:00] installed cifs-utils (5.5-1)
    [2012-07-29 17:00] installed tdb (1.2.9-2)
    [2012-07-29 17:00] installed smbclient (3.6.6-1)
    [2012-07-29 17:00] installed libmad (0.15.1b-6)
    [2012-07-29 17:00] installed fribidi (0.19.2-2)
    [2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
    [2012-07-29 17:00] installed faac (1.28-4)
    [2012-07-29 17:00] installed faad2 (2.7-3)
    [2012-07-29 17:00] installed mpg123 (1.14.4-1)
    [2012-07-29 17:00] installed libass (0.10.0-3)
    [2012-07-29 17:00] installed libbluray (0.2.2-1)
    [2012-07-29 17:00] installed libcddb (1.3.2-3)
    [2012-07-29 17:00] installed libcdio (0.83-1)
    [2012-07-29 17:00] installed mencoder (35014-1)
    [2012-07-29 17:00] installed libftdi (0.20-1)
    [2012-07-29 17:00] installed libirman (0.4.5-3)
    [2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
    [2012-07-29 17:00] installed gpm (1.20.6-10)
    [2012-07-29 17:00] installed aalib (1.4rc5-9)
    [2012-07-29 17:00] installed jack (0.121.3-6)
    [2012-07-29 17:00] installed libcaca (0.99.beta18-1)
    [2012-07-29 17:00] installed xf86dgaproto (2.1-2)
    [2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
    [2012-07-29 17:00] installed mplayer (35014-1)
    [2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
    [2012-07-29 17:00] installed pms (1.60.0-1)
    [2012-07-29 17:20] Running 'pacman -S netstat'
    [2012-07-29 17:31] Running 'pacman -S ntfs-3g'
    [2012-07-29 17:31] installed fuse (2.9.0-1)
    [2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
    [2012-07-29 17:45] Running 'pacman -S tsmuxer'
    [2012-07-29 17:45] Running 'pacman -S tsMuxeR'
    [2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
    [2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
    [2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
    [2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
    [2012-07-29 17:48] The tsmuxer package is licensed software.
    [2012-07-29 17:48] You MUST read and agree to the license stored in
    [2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
    [2012-07-29 17:48] installed tsmuxer (1.10.6-12)
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
    [2012-07-29 18:24] Running 'pacman -S openjre'
    [2012-07-29 18:25] Running 'pacman -S jre'
    [2012-07-29 18:25] Running 'pacman -S icetea-plugin'
    [2012-07-29 18:27] Running 'pacman -S icedtea-web'
    [2012-07-29 18:27] installed icedtea-web (1.2-1)
    [2012-07-29 18:35] Running 'pacman -S ccache'
    [2012-07-29 18:35] installed ccache (3.1.7-1)
    [2012-07-29 18:50] Running 'pacman -S rtorrent'
    [2012-07-29 18:50] installed libsigc++ (2.2.10-2)
    [2012-07-29 18:50] installed libtorrent (0.13.2-2)
    [2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
    [2012-07-29 18:50] installed rtorrent (0.9.2-2)
    [2012-07-29 18:52] Running 'pacman -S rutorrent'
    [2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
    [2012-07-29 18:52] installed php (5.4.5-1)
    [2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 18:53] installed rutorrent (3.4-2)
    [2012-07-29 18:53] Running 'pacman -R rtorrent'
    [2012-07-29 18:53] removed rtorrent (0.9.2-2)
    [2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
    [2012-07-29 18:54] Running 'pacman -S rtorrent'
    [2012-07-29 18:54] installed rtorrent (0.9.2-2)
    [2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
    [2012-07-29 18:55] installed apr (1.4.6-1)
    [2012-07-29 18:55] installed unixodbc (2.3.1-1)
    [2012-07-29 18:55] installed apr-util (1.4.1-1)
    [2012-07-29 18:55] installed apache (2.2.22-4)
    [2012-07-29 18:55] installed php-apache (5.4.5-1)
    [2012-07-29 18:55] installed php-cgi (5.4.5-1)
    [2012-07-29 18:55] installed php-xsl (5.4.5-1)
    [2012-07-29 18:55] installed geoip-database (20120706-1)
    [2012-07-29 18:55] installed geoip (1.4.8-2)
    [2012-07-29 18:55] installed php-geoip (1.0.8-2)
    [2012-07-29 18:55] installed screen (4.0.3-13)
    [2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
    [2012-07-29 19:03] installed mod_scgi (1.14-1)
    [2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
    [2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
    [2012-07-29 19:46] Running 'pacman -S unrar unzip'
    [2012-07-29 19:46] installed unrar (4.2.4-1)
    [2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
    [2012-07-29 20:00] Running 'pacman -S php-apache mysql'
    [2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
    [2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
    [2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
    [2012-07-29 20:02] Installing MySQL system tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02] Filling help tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02]
    [2012-07-29 20:02] To start mysqld at boot time you have to copy
    [2012-07-29 20:02] support-files/mysql.server to the right place for your system
    [2012-07-29 20:02]
    [2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
    [2012-07-29 20:02] To do so, start the server, then issue the following commands:
    [2012-07-29 20:02]
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
    [2012-07-29 20:02]
    [2012-07-29 20:02] Alternatively you can run:
    [2012-07-29 20:02] /usr/bin/mysql_secure_installation
    [2012-07-29 20:02]
    [2012-07-29 20:02] which will also give you the option of removing the test
    [2012-07-29 20:02] databases and anonymous user created by default. This is
    [2012-07-29 20:02] strongly recommended for production servers.
    [2012-07-29 20:02]
    [2012-07-29 20:02] See the manual for more instructions.
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can start the MySQL daemon with:
    [2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
    [2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
    [2012-07-29 20:02]
    [2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
    [2012-07-29 20:02]
    [2012-07-29 20:02] installed mysql (5.5.25.a-1)
    [2012-07-29 20:49] Running 'pacman -Syyu'
    [2012-07-29 20:49] synchronizing package lists
    [2012-07-29 20:50] starting full system upgrade
    [2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
    [2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
    [2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
    [2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
    [2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
    [2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
    [2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
    [2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
    [2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
    [2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
    [2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
    [2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
    [2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
    [2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
    [2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
    [2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
    [2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
    [2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
    [2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
    [2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
    [2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
    [2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-29 20:52] ==> Building image from preset: 'default'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [autodetect]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] ==> Building image from preset: 'fallback'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
    [2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
    [2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
    [2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
    [2012-08-03 12:40] Running 'pacman -S filezilla'
    [2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
    [2012-08-03 12:40] installed libidn (1.25-1)
    [2012-08-03 12:40] installed filezilla (3.5.3-1)
    [2012-08-06 13:55] Running 'pacman -R openjdk'
    [2012-08-06 13:55] Running 'pacman -R openjdk6'
    [2012-08-06 13:55] Running 'pacman -R icedtea-web'
    [2012-08-06 13:55] removed icedtea-web (1.2-1)
    [2012-08-06 13:56] Running 'pacman -S jdk'
    [2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
    [2012-08-06 13:58]
    [2012-08-06 13:58] The jre package is licensed software.
    [2012-08-06 13:58] You MUST read and agree to the license stored in
    [2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
    [2012-08-06 13:58] Please relogin to include jre in your PATH.
    [2012-08-06 13:58]
    [2012-08-06 13:58] installed jre (7.5-2)
    [2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 14:01]
    [2012-08-06 14:01] The jdk package is licensed software.
    [2012-08-06 14:01] You MUST read and agree to the license stored in
    [2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
    [2012-08-06 14:01] Please relogin to include jdk in your PATH.
    [2012-08-06 14:01]
    [2012-08-06 14:01] installed jdk (7.5-2)
    [2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:15] Running 'pacman -R jdk jre'
    [2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
    [2012-08-06 14:17] removed jdk (7.5-2)
    [2012-08-06 14:17] removed jre (7.5-2)
    [2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:19] The jre package is licensed software.
    [2012-08-06 14:19] You MUST read and agree to the license stored in
    [2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
    [2012-08-06 14:19] Please relogin to include jre in your PATH.
    [2012-08-06 14:19] installed jre6 (6u33-b04)
    [2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:21] The jdk package is licensed software.
    [2012-08-06 14:21] You MUST read and agree to the license stored in
    [2012-08-06 14:21] /opt/java/LICENSE before using it.
    [2012-08-06 14:21] Please relogin to include jdk in your PATH
    [2012-08-06 14:21] installed jdk6 (6u33-b04)
    [2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
    [2012-08-06 17:23] Running 'pacman -S gimp'
    [2012-08-06 17:23] installed lcms (1.19-2)
    [2012-08-06 17:23] Updating font cache... done.
    [2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
    [2012-08-06 17:23] installed libwmf (0.2.8.4-9)
    [2012-08-06 17:23] installed libcroco (0.6.5-1)
    [2012-08-06 17:23] installed librsvg (2.36.1-1)
    [2012-08-06 17:23] installed babl (0.1.10-1)
    [2012-08-06 17:23] installed gegl (0.2.0-2)
    [2012-08-06 17:23] installed freeglut (2.8.0-1)
    [2012-08-06 17:23] installed jasper (1.900.1-7)
    [2012-08-06 17:23] installed gimp (2.8.0-2)
    [2012-08-06 18:25] Running 'pacman -Sy'
    [2012-08-06 18:25] synchronizing package lists
    [2012-08-06 18:25] Running 'pacman -S yaourt'
    [2012-08-06 18:28] Running 'pacman -Sy'
    [2012-08-06 18:28] synchronizing package lists
    [2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:29] Running 'pacman -Sy'
    [2012-08-06 18:29] synchronizing package lists
    [2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
    [2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
    [2012-08-06 21:51] removed jdk6 (6u33-b04)
    [2012-08-06 21:51] removed jre6 (6u33-b04)
    [2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
    [2012-08-06 21:54] The sun-java6 package is licensed software.
    [2012-08-06 21:54] You MUST read and agree to the license stored in
    [2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
    [2012-08-06 21:54]
    [2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
    [2012-08-06 21:54] installed sun-java6 (6u32-1)
    [2012-08-06 21:59] Running 'pacman -Syu'
    [2012-08-06 21:59] synchronizing package lists
    [2012-08-06 21:59] starting full system upgrade
    [2012-08-06 22:00] Running 'pacman -Sy'
    [2012-08-06 22:00] synchronizing package lists
    [2012-08-06 22:00] Running 'pacman -S yaourt'
    [2012-08-06 22:00] installed yajl (2.0.4-1)
    [2012-08-06 22:00] installed package-query (1.0.1-1)
    [2012-08-06 22:00] installed yaourt (1.1-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
    [2012-08-06 22:01] installed java-rhino (1.7R3-3)
    [2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
    [2012-08-06 22:01] when you use a non-reparenting window manager
    [2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-08-06 22:01] /etc/profile.d/jre.sh
    [2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:02] installed android-apktool (1.4.9-1)
    [2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-08-06 22:05] The android group has been removed, install android packages as root.
    [2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
    [2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
    [2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
    [2012-08-06 22:08] installed libmtp (1.1.3-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
    [2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
    [2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
    [2012-08-06 22:08] installed android-udev (1.3-4)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
    [2012-08-06 22:08] installed fastboot (20110628-2)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
    [2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
    [2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
    [2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
    [2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
    [2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
    [2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
    [2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
    [2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
    [2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
    [2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
    [2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
    [2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
    [2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
    [2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
    [2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
    [2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
    [2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
    [2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
    [2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
    [2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
    [2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
    [2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
    [2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
    [2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
    [2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
    [2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
    [2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
    [2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
    [2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
    [2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-08-06 22:20] ==> Building image from preset: 'default'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [autodetect]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] ==> Building image from preset: 'fallback'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
    [2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
    [2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
    [2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
    [2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
    [2012-08-06 22:23] Running 'pacman -S openjdk'
    [2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
    [2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
    [2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:25] Running 'pacman -R pms'
    [2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
    [2012-08-06 22:25] removed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:26] installed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -S vlc'
    [2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
    [2012-08-06 22:26] installed sdl_image (1.2.12-2)
    [2012-08-06 22:26] installed libdvdread (4.2.0-1)
    [2012-08-06 22:26] installed libdvdnav (4.2.0-2)
    [2012-08-06 22:26] installed libkate (0.4.1-3)
    [2012-08-06 22:26] installed libtiger (0.3.4-3)
    [2012-08-06 22:26] installed libebml (1.2.2-2)
    [2012-08-06 22:26] installed libmatroska (1.3.0-2)
    [2012-08-06 22:26] installed zvbi (0.2.33-4)
    [2012-08-06 22:26] installed taglib (1.7.2-2)
    [2012-08-06 22:26] installed libmpcdec (1.2.6-3)
    [2012-08-06 22:26] installed libupnp (1.6.17-1)
    [2012-08-06 22:26] installed libshout (1:2.3.0-1)
    [2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
    [2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
    [2012-08-06 22:26] installed ttf-freefont (20120503-1)
    [2012-08-06 22:26] installed vlc (2.0.3-2)
    [2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
    [2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
    [2012-08-07 11:44] installed pacman-color (4.0.3-1)
    [2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
    [2012-08-07 11:44] installed packer-color (20120807-1)
    [2012-08-07 11:50] Running 'pacman-color -S packer'
    [2012-08-07 15:50] Running 'pacman -Syyu'
    [2012-08-07 15:50] synchronizing package lists
    [2012-08-07 15:50] starting full system upgrade
    [2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
    [2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 16:02] Running 'pacman-color -S crontab'
    [2012-08-07 16:02] Running 'pacman-color -S cronjob'
    [2012-08-07 16:02] Running 'pacman-color -S cron'
    [2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
    [2012-08-07 16:04] Running 'pacman-color -S cronie'
    [2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
    [2012-08-07 16:05] installed libesmtp (1.0.6-2)
    [2012-08-07 16:05] installed esmtp (1.2-4)
    [2012-08-07 16:05] installed procmail (3.22-5)
    [2012-08-08 12:10] Running 'pacman -Sy'
    [2012-08-08 12:10] synchronizing package lists
    [2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -R pms'
    [2012-08-08 18:02] removed pms (1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -Sy'
    [2012-08-08 18:02] synchronizing package lists
    [2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 18:03] installed pms (1.60.0-2)
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
    [2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
    [2012-08-08 18:36] Running 'pacman -R pms'
    [2012-08-08 1

    shadowlurker wrote:
    It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
    auth sufficient pam_rootok.so
    auth required pam_unix.so
    account required pam_unix.so
    session required pam_unix.so
    password required pam_permit.so
    You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
    Doug piston had me try something that I think will help anyone else who has this problem.  Try re-installing pambase and shadow.  It generated back most of any I was missing.
    Last edited by shauder (2012-11-03 00:55:19)

  • Solve Problem with USB Connection / Read this it i...

    i can not load maps on my n97 mini. the error 'usb connection lost...' show on the screen in map loader but at the first day i had no problems.
    i wonder why. i look for driver, ovi suite, pc suite, usb at the pc, read in the forum and many more. but nothing solve the problem. after 2 days i use accidentally the original cable which comes with the nokia n97 mini (it is a ca-101) and all my problems are gone ! bevor i use an 'old' ca-101 cabel from my n82 and i can not upload a map but the handy is shown in the pc system with all drivers and no problems. only loading big megabytes data on the handy crashes the usb connection. with the n97 mini ca-101 cabel no problem with gigabytes. i look for another ca-101 cable from the 6220 from my wife and i have the same problems (i never used bevor this cable for a connection to any handy ! it was brand new !). it seems that 'old' ca-101 cabels do not handle big data with the n97 mini. i look on the gold spring clips in the micro usb and could see that the are a little smaller and not so high in the jack in the 'old' cables. all three cables are original from nokia and not from china ! if you are also problems look on the produkt id on the plastics. if the letters are gold you have a cable like my n97 mini cable, but if the letters are black on a silver button you have an 'old' cable.
    i hope i can help another with this maniac problem
    greetings

    I can verify this on win7 with latest PC suite.
    I was using the cable that came with my 6500s as I didn't want to tackle the rats nest of wiring behind my pc.
    This cable is a ca101 with silver writing on the plastic tab, made in China.
    Using this cable, my 6620c would not complete a backup, it would just sit for hours on 2-4%.
    Tested with the ca101 cable that came with the 6620c (gold writing, made in Thailand).
    This time the backup completed in about 2 minutes.
    Thank you so much for finding this, it has been driving me crazy!

  • [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

    Hi!
    I'm having problems with Bumblebee from Kernel 3.10 but I read that Kernel 3.11 solved the problem, I searched and tried possible solutions to my problem unsuccessfully
    The message shows me when I run "optirun":
    [ 5454.262739] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
    [ 5454.262776] [ERROR]Aborting because fallback start is disabled.
    I've tried with wiki's solutions, forums solutions...
    Configurations files:
    /etc/bumblebee/bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=virtualgl
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    /etc/bumblebee/xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    Option "AutoAddGPU" "false"
    EndSection
    Section "Device"
    Identifier "DiscreteNvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    # If the X server does not automatically detect your VGA device,
    # you can manually set it here.
    # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    # as you see in the commented example.
    # This Setting may be needed in some platforms with more than one
    # nvidia card, which may confuse the proprietary driver (e.g.,
    # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00.0"
    # Setting ProbeAllGpus to false prevents the new proprietary driver
    # instance spawned to try to control the integrated graphics card,
    # which is already being managed outside bumblebee.
    # This option doesn't hurt and it is required on platforms running
    # more than one nvidia graphics card with the proprietary driver.
    # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    # If this option is not set, the new Xorg may blacken the screen and
    # render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    lspci |grep NVIDIA:
    01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev a1)
    I hope can help me
    Thanks!
    Last edited by surrealistic (2013-11-04 18:46:35)

    My /var/log/Xorg.8.log:
    [ 337.161]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 337.161] X Protocol Version 11, Revision 0
    [ 337.161] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 337.161] Current Operating System: Linux h131h-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
    [ 337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
    [ 337.161] Build Date: 01 November 2013 05:10:48PM
    [ 337.161]
    [ 337.161] Current version of pixman: 0.30.2
    [ 337.161] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 337.161] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 337.161] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 4 14:20:04 2013
    [ 337.161] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 337.161] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 337.161] (==) ServerLayout "Layout0"
    [ 337.161] (==) No screen section available. Using defaults.
    [ 337.161] (**) |-->Screen "Default Screen Section" (0)
    [ 337.161] (**) | |-->Monitor "<default monitor>"
    [ 337.161] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 337.161] (**) | |-->Device "DiscreteNvidia"
    [ 337.161] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 337.161] (**) Option "AutoAddDevices" "false"
    [ 337.161] (**) Option "AutoAddGPU" "false"
    [ 337.161] (**) Not automatically adding devices
    [ 337.161] (==) Automatically enabling devices
    [ 337.161] (**) Not automatically adding GPU devices
    [ 337.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 337.162] Entry deleted from font path.
    [ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 337.162] Entry deleted from font path.
    [ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 337.162] Entry deleted from font path.
    [ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 337.162] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 337.162] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 337.162] (==) |-->Input Device "<default pointer>"
    [ 337.162] (==) |-->Input Device "<default keyboard>"
    [ 337.162] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 337.162] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 337.162] (II) Loader magic: 0x7fdc20
    [ 337.162] (II) Module ABI versions:
    [ 337.162] X.Org ANSI C Emulation: 0.4
    [ 337.162] X.Org Video Driver: 14.1
    [ 337.162] X.Org XInput driver : 19.1
    [ 337.162] X.Org Server Extension : 7.0
    [ 337.162] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 337.162] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 337.162] setversion 1.4 failed
    [ 337.163] (--) PCI:*(0:1:0:0) 10de:0fd2:1025:0648 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
    [ 337.163] Initializing built-in extension Generic Event Extension
    [ 337.163] Initializing built-in extension SHAPE
    [ 337.163] Initializing built-in extension MIT-SHM
    [ 337.163] Initializing built-in extension XInputExtension
    [ 337.163] Initializing built-in extension XTEST
    [ 337.163] Initializing built-in extension BIG-REQUESTS
    [ 337.163] Initializing built-in extension SYNC
    [ 337.163] Initializing built-in extension XKEYBOARD
    [ 337.163] Initializing built-in extension XC-MISC
    [ 337.163] Initializing built-in extension SECURITY
    [ 337.163] Initializing built-in extension XINERAMA
    [ 337.163] Initializing built-in extension XFIXES
    [ 337.163] Initializing built-in extension RENDER
    [ 337.163] Initializing built-in extension RANDR
    [ 337.164] Initializing built-in extension COMPOSITE
    [ 337.164] Initializing built-in extension DAMAGE
    [ 337.164] Initializing built-in extension MIT-SCREEN-SAVER
    [ 337.164] Initializing built-in extension DOUBLE-BUFFER
    [ 337.164] Initializing built-in extension RECORD
    [ 337.164] Initializing built-in extension DPMS
    [ 337.164] Initializing built-in extension X-Resource
    [ 337.164] Initializing built-in extension XVideo
    [ 337.164] Initializing built-in extension XVideo-MotionCompensation
    [ 337.164] Initializing built-in extension XFree86-VidModeExtension
    [ 337.164] Initializing built-in extension XFree86-DGA
    [ 337.164] Initializing built-in extension XFree86-DRI
    [ 337.164] Initializing built-in extension DRI2
    [ 337.164] (II) LoadModule: "glx"
    [ 337.164] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 337.172] (II) Module glx: vendor="NVIDIA Corporation"
    [ 337.172] compiled for 4.0.2, module version = 1.0.0
    [ 337.172] Module class: X.Org Server Extension
    [ 337.172] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 337.172] Loading extension GLX
    [ 337.172] (II) LoadModule: "nvidia"
    [ 337.172] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 337.172] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 337.172] compiled for 4.0.2, module version = 1.0.0
    [ 337.172] Module class: X.Org Video Driver
    [ 337.172] (II) LoadModule: "mouse"
    [ 337.172] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 337.172] (II) Module mouse: vendor="X.Org Foundation"
    [ 337.172] compiled for 1.14.0, module version = 1.9.0
    [ 337.172] Module class: X.Org XInput Driver
    [ 337.172] ABI class: X.Org XInput driver, version 19.1
    [ 337.172] (II) LoadModule: "kbd"
    [ 337.173] (WW) Warning, couldn't open module kbd
    [ 337.173] (II) UnloadModule: "kbd"
    [ 337.173] (II) Unloading kbd
    [ 337.173] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 337.173] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 337.173] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 337.173] (--) using VT number 1
    [ 337.173] (II) Loading sub module "fb"
    [ 337.173] (II) LoadModule: "fb"
    [ 337.173] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 337.173] (II) Module fb: vendor="X.Org Foundation"
    [ 337.173] compiled for 1.14.4, module version = 1.0.0
    [ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 337.173] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 337.173] (II) Loading sub module "wfb"
    [ 337.173] (II) LoadModule: "wfb"
    [ 337.173] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 337.173] (II) Module wfb: vendor="X.Org Foundation"
    [ 337.173] compiled for 1.14.4, module version = 1.0.0
    [ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 337.173] (II) Loading sub module "shadow"
    [ 337.173] (II) LoadModule: "shadow"
    [ 337.173] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 337.173] (II) Module shadow: vendor="X.Org Foundation"
    [ 337.173] compiled for 1.14.4, module version = 1.1.0
    [ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 337.173] (II) Loading sub module "ramdac"
    [ 337.173] (II) LoadModule: "ramdac"
    [ 337.173] (II) Module "ramdac" already built-in
    [ 337.174] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 337.174] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 337.174] (==) NVIDIA(0): RGB weight 888
    [ 337.174] (==) NVIDIA(0): Default visual is TrueColor
    [ 337.174] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 337.174] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 337.174] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 337.174] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 337.174] (**) NVIDIA(0): Enabling 2D acceleration
    [ 337.174] (**) NVIDIA(0): Ignoring EDIDs
    [ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 337.174] (**) NVIDIA(0): mode
    [ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 341.309] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 341.309] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 341.309] (EE) NVIDIA(0): README for additional information.
    [ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 341.309] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 341.309] (II) UnloadModule: "nvidia"
    [ 341.309] (II) UnloadSubModule: "shadow"
    [ 341.309] (II) UnloadSubModule: "wfb"
    [ 341.309] (II) UnloadSubModule: "fb"
    [ 341.309] (EE) Screen(s) found, but none have a usable configuration.
    [ 341.309] (EE)
    Fatal server error:
    [ 341.309] (EE) no screens found(EE)
    [ 341.309] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 341.309] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 341.309] (EE)
    [ 341.309] (EE) Server terminated with error (1). Closing log file.
    dmesg |grep bbswitch:
    [ 13.570577] bbswitch: version 0.7
    [ 13.570585] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 13.570591] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 13.570687] bbswitch: detected an Optimus _DSM function
    [ 13.570741] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 13.572354] bbswitch: disabling discrete graphics
    [ 261.419114] bbswitch: enabling discrete graphics
    [ 278.445698] bbswitch: disabling discrete graphics
    [ 279.055257] bbswitch: enabling discrete graphics
    [ 286.292315] bbswitch: disabling discrete graphics
    [ 291.911052] bbswitch: enabling discrete graphics
    [ 310.011289] bbswitch: disabling discrete graphics
    [ 336.982794] bbswitch: enabling discrete graphics
    [ 349.526470] bbswitch: enabling discrete graphics
    I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work

  • [SOLVED] Problem with UTC and CST

    I probably made a mistake while installing Arch Linux and the clocks in my computer are all a mess.
    Right now the UTC time its 6+ hours, I changed it in the bios to the right hour but that give me -6 hours in the local time thats displayed in Arch Linux and gave me the right hour in Windows 7.
    timedatectl
    Local time: Fri 2013-12-20 12:33:12 CST
    Universal time: Fri 2013-12-20 18:33:12 UTC
             RTC time: Fri 2013-12-20 18:33:12
            Timezone: America/Mexico_City (CST, -0600)
         NTP enabled: yes
    NTP synchronized: yes
    RTC in local TZ: no
          DST active: no
    Last DST change: DST ended at
                      Sun 2013-10-27 01:59:59 CDT
                      Sun 2013-10-27 01:00:00 CST
    Next DST change: DST begins (the clock jumps one hour forward) at
                      Sun 2014-04-06 01:59:59 CST
                      Sun 2014-04-06 03:00:00 CDT
    PS: Already did everything in the wiki and tried with some [SOLVED] posts.
    Edit: The problem with this its that when i use Windows 7 (to play DotA... or using the iPod, since no player can edit the files in the ipod) the hour is 6+ hours, that causes problems with the configuration in the ipod since each time i connect it the clock (that its also my only clock) changes to 6+ hours. Its maybe irrelevant for someone but i would like to have the right hour in all my systems.
    Last edited by Senketsu (2013-12-20 19:16:54)

    I am with Scimmia, everything looks correct.   But, If you boot Windows, it will try to change the BIOS clock to local time unless you tell it otherwise.
    Edit for both of your edits.  Yes, fix windows
    Last edited by ewaller (2013-12-20 18:56:32)

  • [SOLVED] Problem with modules and udev

    Hi everybody,
    I've been configuring Arch on my new laptop the last few days and today as I was going to perform the first backup, I noticed that my external HDD does not show up in /dev/ when I plug it in. I figured it could be a problem with udev and the fact that in my /etc/rc.conf I use MOD_AUTOLOAD="no" with an explicit list of MODULES generated with hwdetect (as suggested in the wiki).
    To "solve" this I just changed MOD_AUTOLOAD to "yes" and after a reboot everything worked fine.
    My questions are:
    1) Is it possible to keep that feature (udev detects usb drives and creates the corresponding /dev/sdX) while having MOD_AUTOLOAD="no" ? What is/are the appropriate module(s) I have to put in my MODULES array ?
    2) What other such "basic" MODULES could be very useful that hwdetect does not tell about.
    Sorry for any English mistakes (I'm not a native speaker) and thank you in advance for your help,
    yms
    Last edited by yms (2010-01-06 12:48:20)

    1) Thank you, it works perfectly.
    2) Yes I know the question is weird. The thing is I have no precise idea at the moment and I just wanted to know if there are other very widely used features such as the one described in 1) that hwdetect ommits and that has to be loaded in MODULES.
    Anyway, thank you very much, I consider this matter [solved]

  • [solved] problems with timeouts and tcp retransmission

    I've recently upgraded my archlinux and am having real problems with the network.
    I have checked the configuation and all seems ok.
    Everything like DNS/Gateways/IPs all seem to be setup (not changed anything from when it was working before)
    I read about setting the MTU manually
    ifconfig eth0 mtu 1492
    I tried this but it doesn't seem to make any difference
    Looking at the packetflow on wireshark it seems that there are a huge amount of TCP Dup ACK and TCP Retransmission when trying to POST
    If I boot into windows everything is fine so unfortunately it seems that it might be something with linux
    Everything in linux seemed to be working ok before I upgraded
    Last edited by equilibrium (2009-12-05 15:13:14)

    seems that I am still unable to post from my arch system
    $ dmesg | grep sky2
    sky2 driver version 1.23
    sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    sky2 0000:02:00.0: setting latency timer to 64
    sky2 0000:02:00.0: Yukon-2 EC chip revision 2
    sky2 0000:02:00.0: irq 29 for MSI/MSI-X
    sky2 eth0: addr xx:xx:xx:xx:xx:xx
    sky2 eth0: enabling interface
    sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
    $ ifconfig
    eth0 Link encap:Ethernet HWaddr 00:17:31:F4:ED:A2
    inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1170 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1362 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:1101154 (1.0 Mb) TX bytes:197742 (193.1 Kb)
    Interrupt:19
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:4595 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4595 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:541498 (528.8 Kb) TX bytes:541498 (528.8 Kb)
    /etc/rc.conf
    eth0="eth0 192.168.1.20 netmask 255.255.255.0 broadcast 192.168.1.255"
    INTERFACES=(eth0)
    gateway="default gw 192.168.1.1"
    ROUTES=(gateway)

  • [SOLVED] Problem with privileges (nm-applet and mounting devices)

    Hi,
    I have a little problem after a system update made a few weeks ago. (At least I think it started after that update, but I am not sure.)
    It's something related to lack of privileges or sth...
    When I right-click on nm-applet icon some options are greyd out as well as when I try to add a new network - everything in the dialog is grey. But when I "sudo nm-applet", everything works.
    And the next problem is: When I plug my USB stick/drive to NB it is not mounted automatically but I need to open nautilus, mount it manually and an "Authenticate" dialog shows up and my password is required. But why? It didn't use to work that way. I don't understant what might have changed.
    I use SLiM starting my gnome-session.
    My ~/.xinitrc:
    exec ck-launch-session dbus-launch gnome-session
    My /usr/share/gnome-session/sessions/gnome-fallback.session
    RequiredComponents=gnome-settings-daemon;
    RequiredProviders=windowmanager;
    DefaultProvider-windowmanager=compiz
    DefaultProvider-notifications=notify-osd
    DefaultProvider-displaymanager=slim
    (I don't use gnome-shell nor gnome-panel, but Gnome with xfce4-panel )
    Thank you in advance.
    Last edited by mino.sk (2012-06-22 21:25:57)

    Thank you, headkase, you were right about it! Removing "ck-launch-session" solved my problems. I also removed "dbus-launch" because I didn't have it there originally, I had added "dbus-launch" to exec line just today as I had read somewhere that it might help (it didn't)...
    So, I'm going with "exec gnome-session" and everything works, thanks.
    //Edit: Admin can mark this as "[SOLVED]"
    Last edited by mino.sk (2012-06-22 20:22:39)

  • [SOLVED] Problem with ca-certificates

    For some time there is a problem with ca-certificates during update. I receive folowing error:
    [user@bragi ~]$ sudo pacman -Suy
    :: Synchronizowanie baz danych z pakietami...
    core jest już w najnowszej wersji
    community jest już w najnowszej wersji
    multilib jest już w najnowszej wersji
    :: Rozpoczynanie pełnej aktualizacji systemu...
    ostrzeżenie: libxml-perl: local (0.08-6) jest nowsze niż community (0.08-5)
    rozwiązywanie zależności...
    ostrzeżenie: nie można rozwiązać "ca-certificates-mozilla", zależności od "ca-certificates"
    :: Następujący pakiet nie mógł zostać zaktualizowany w wyniku niespełnionych zależności:
    ca-certificates
    :: Czy chcesz pominąć powyższy pakiet przy aktualizacji? [t/N] N
    błąd: nie udało się przygotować transakcji (niespodziewany błąd)
    I know that this is not in english but the messages says that there is a error with dependency ca-certificates-mozilla <--> ca-certificates.
    I ask this same question on polish forum but I only receive suggestion to try run:
    pacman -Suyy
    but this is not a solution.
    Any ideas?
    Last edited by web01 (2014-10-16 19:36:30)

    I'm not sure but maybe becouse of this
    [user@bragi ~]$ sudo pacman -Suyy
    :: Synchronizing package databases...
    core 116.7 KiB 1945K/s 00:00 [#####################################################] 100%
    extra 1767.3 KiB 2.16M/s 00:01 [#####################################################] 100%
    community 2.3 MiB 2.28M/s 00:01 [#####################################################] 100%
    multilib 118.9 KiB 2.04M/s 00:00 [#####################################################] 100%
    :: Starting full system upgrade...
    :: Replace ati-dri with extra/mesa-dri? [Y/n]
    :: Replace baloo with extra/baloo4? [Y/n]
    :: Replace baloo-widgets with extra/baloo4-widgets? [Y/n]
    :: Replace grantlee with extra/grantlee-qt4? [Y/n]
    :: Replace intel-dri with extra/mesa-dri? [Y/n]
    :: Replace java-common with extra/java-runtime-common? [Y/n]
    :: Replace kfilemetadata-frameworks with extra/kfilemetadata5? [Y/n]
    warning: libxml-perl: local (0.08-6) is newer than community (0.08-5)
    :: Replace nouveau-dri with extra/mesa-dri? [Y/n]
    :: Replace svga-dri with extra/mesa-dri? [Y/n]
    resolving dependencies...
    looking for inter-conflicts...
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: kwin and kdebase-workspace are in conflict

  • Problems with rsync scripting

    I'm having a problem scripting rsync since updating from Snow Leopard to Mavericks.  I had an Applescript that would backup a USB thumb drive with rsync.  It stopped working after the upgrade.  The odd thing is that the exact same rsync command works from the command line.  I re-wrote the backup script as a .sh file.  Same problem.  I can run the script from Textwrangler and it works.  Running it from the file gives the same error. 
    The rsync command:
    rsync -azv --ignore-existing --delete --exclude='.*' '/Volumes/No Name/' '/Users/scott/Documents/Documents/Backup_USB_Drive/Backup_New/'
    The error:
    building file list ... rsync: link_stat "/Volumes/No Name/." failed: Invalid argument (22)
    done
    sent 29 bytes  received 20 bytes  98.00 bytes/sec
    total size is 0  speedup is 0.00
    rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-42/rsync/main.c(992) [sender=2.6.9]
    Help.  How do I make this work?

    Maybe I'm missing the point, but this seems to work for me:
    try
        POSIX file "Volumes/No Name/" as alias -- alias "No Name:"
    on error
        display dialog "Where is volume “No Name”?"
    end try
    do shell script "rsync -azv --ignore-existing --delete --exclude='.*' '/Volumes/No Name/' '/Users/scott/Documents/Documents/Backup_USB_Drive/Backup_New/'"

  • [SOLVED] Problems with mutual intergration of different apps

    Hi guys.
    I am an arch newbie. I switched to Arch from distros like openSUSE/Ubuntu because I was frustrated by the fact that many things were hidden from my eyes and I didn't have full control over the system. With Arch I was able to build the system from the ground up and control every aspect of it. This resulted in good performance (system boots in matter of seconds), and stability.
    I chose awesome3 as the window manager, added iDesk and xfce's thunar as the file manager.  This all works nice and fast, but there is one problem. For example, when I download a file in my web browser (chromium) and click the "show in folder" menu item, nothing happens (I'd expect the folder to open in Thunar). Similarly, if I click a link in a roxterm window, the browser won't open, and so on.
    I wonder how it is possible to enable the desired integration between various apps. Is there an unified mechanism for that? Or does every app require individual  approach?
    Thanks.
    Last edited by 10098 (2010-05-17 05:14:27)

    File type stuff can be configured with xdg-mime, which is part of the xdg-utils package.  Read its man page.
    I had the exact same problem with chromium and thunar and you can get it to work with:
    xdg-mime default Thunar.desktop application/x-directory
    I found myself doing this sort of thing a lot, and there are utilities to be found that can make it easier.
    However, I just decided to write a simple bash script frontend for xdg-mime a while back that you might find useful. (I wrote it hoping someone would have a use for it I am so excited right now you dont even...)
    associate
    #!/bin/sh
    if [ $# = 1 -o $# = 2 ]
    then
    if [ -e "$1" ]
    then
    TYPE=$(xdg-mime query filetype "$1" | sed 's/;.*$//')
    if [ $# = 1 ]
    then
    APP=$(xdg-mime query default $TYPE)
    if [ -z $APP ]
    then
    APP="NONE"
    fi
    echo $TYPE opens with $APP
    else
    APP=$2.desktop
    if [ -e /usr/share/applications/$APP ]
    then
    echo $TYPE now opens with $APP
    xdg-mime default $APP $TYPE
    else
    echo associate: $APP: no such application installed
    fi
    fi
    else
    echo associate: $1: no such file
    exit 1
    fi
    else
    echo "USAGE:
    associate FILENAME [APPLICATION]"
    exit 1
    fi
    To use it, just copy it to a text file, I suggest calling it "associate", make it executable with "chmod +x associate", and you can run it by doing stuff like:
    $ ./associate my_silly_face.png
    image/png opens with NONE
    $ ./associate my_silly_face.png gpicview
    image/png now opens with gpicview.desktop
    If you haven't done so, now would be a good time to dedicate a directory in your home folder for oddball scripts and programs like these.  Then you can add that directory to your $PATH and use those utilities like any other program, instead of having to explicitly type out the path to the executable.
    Last edited by Odysseus (2010-05-17 02:35:01)

  • [Solved] Problem with mouse cursor gnome3

    Hi
    I moved back to Archlinux after a brief stay in LMDE, and test the new GNOME3, I am unpleasantly surprised that after a while the mouse is moving himself toward the top of the screen. I searched the internet, and seems to be a problem with the gnome-shell for some time, but I am not able to find the solution.
    Momentarily solved by restarting gnome with ALT + F2 + r + Enter, but after a while, same thing happens again.
    Can be well with photography programs, but of course if you do not solve this issue, GNOME, I can not use
    Can you give me a helping hand?
    Thanks and regards
    Rafa
    Last edited by Warper4 (2011-08-16 18:09:50)

    I don't know about Gnome, but my laptop had that problem.  I tracked it down the 3d accelerometer being used to simulate a joystick.  Of course, I also had (previously) set up another joystick to operate as a mouse.  In the end, the cursor "drifted" when the laptop was not level
    YMMV

  • [SOLVED] Problem with MPD and ALSA

    Hello, I'm having problems with mpd using alsa output.
    My alsa system works, I can play mp3 using mplayer -ao alsa, and flash plugin plays sound, my user (and also mpd user)is in the audio group.
    But then mpd can't open the alsa device.
    If I tell mpd to autodetect audio, it can't find anything:
    (Running as root to see output, if using /etc/rc.d/mpd start, it just fails)
    output: No "audio_output" defined in config file
    output: Attempt to detect audio output device
    output: Attempting to detect a alsa audio device
    ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
    ALSA lib conf.c:4184:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
    ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
    ALSA lib conf.c:4184:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
    ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
    ALSA lib conf.c:4184:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
    ALSA lib conf.c:4663:(snd_config_expand) Evaluate error: No such file or directory
    ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM default
    alsa: Error opening default ALSA device: No such file or directory
    output: Attempting to detect a oss audio device
    oss: Error opening OSS device "/dev/dsp": No such file or directory
    oss: Error opening OSS device "/dev/sound/dsp": No such file or directory
    output: Attempting to detect a pulse audio device
    mpd: src/output/pulse_output_plugin.c:400: pulse_output_wait_connection: Assertion `po->mainloop != ((void *)0)' failed.
    and if I set up a basic alsa config...
    audio_output {
    type "alsa"
    name "HDA-Intel"
    It starts, but then playing anything:
    % mpc play
    Caspian - La Cerva
    [paused] #2/10 0:00/4:59 (0%)
    volume: n/a repeat: off random: off single: off consume: off
    ERROR: problems opening audio device
    mpc.log output:
    ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
    ALSA lib conf.c:4184:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
    ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
    ALSA lib conf.c:4184:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
    ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
    ALSA lib conf.c:4184:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
    ALSA lib conf.c:4663:(snd_config_expand) Evaluate error: No such file or directory
    ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM default
    Sep 22 10:08 : output: Failed to open "HDA-Intel" [alsa]: Failed to open ALSA device "default": No such file or directory
    I tried with different device and mixer settings and the error is always the same. It can't open alsa device.
    Any Ideas?
    Thank you.
    Last edited by xzakox (2011-09-22 20:04:33)

    Check that mpd is really being run as the mpd user, and that id lists audio for the mpd user. Also post your whole mpd.conf and the output from amixer when running as the user you run mpd as.
    Last edited by Mr.Elendig (2011-09-22 11:43:35)

Maybe you are looking for

  • I have a Macbook Pro 13" and a 24" external lcd monitor go gray (lock-up)

    If I plug my external monitor into my Macbook pro 13, via mini displayport, sometime durning the day, lately multiple times, the Mac and external monitor will go flat gray and "lock-up" only solution is to hold power button down and reboot.  This pro

  • Is it possible to run a LabVIEW LLB from Version 8.6.1 on a Version 8.6 platform?

    We need to move a Version 8.6.1 LLB to a Version 8.6 platform. Assuming our 8.6.1 LLB does not use any 8.6.1 specific features, can I convert it to run under LabVIEW 8.6? Thanks!

  • JPG acting odd in PSE11

    Hi. Recently udated from PSE8 to PSE11 on the same computer [Win 7 SP1 64-bit]. If I take a JPG file previously saved with PSE8 at 300 DPI and bring it into CorelDraw 14, I have no problems. Take the same JPG and slightly modify something as simple a

  • Payment was refunded

    I did not want my payment refunded and the payment was not fraudulent I want my subscription back this is the 3rd time its tried to refund me cuz of fraudulent charge its my credit card I used to pay for it..

  • Flaw in Siri in iOS 7

    Siri flaw when sending an iMessage it again asks for the contact to which it should send the message-discover on iPad mini ios7