[Solved] Skype won't run on x86_64

[jiehan@tpx1c ~]$ sudo pacman -Q skype
skype 4.1.0.20-4
[jiehan@tpx1c ~]$ skype
ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
/usr/lib32/skype/skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory
[jiehan@tpx1c ~]$
Any ideas?  Thanks.
UPDATE: Reinstalling lib32-alsa-lib and lib32-libxv made Skype to run.  I don't know what made these packages corrupted.
However, I ran into a new issue, and this is what I get now:
[jiehan@tpx1c ~]$ skype
ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
Inconsistency detected by ld.so: dl-open.c: 684: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
UPDATE: Reinstalling lib32-alsa-plugins lib32-glib2 lib32-libogg, which seem to be corrupted on my filesystem for some reason, finally solves this issue.  Thank you everyone.
Last edited by jiehanzheng (2013-03-03 02:44:19)

theodore wrote:...uninstall it and install it again.
I did not.  Just tried but it still won't run...
[root@tpx1c jiehan]# pacman -R skype
checking dependencies...
Targets (1): skype-4.1.0.20-4
Total Removed Size: 35.64 MiB
Do you want to remove these packages? [Y/n]
(1/1) removing skype [######################] 100%
[root@tpx1c jiehan]# pacman -S skype
resolving dependencies...
looking for inter-conflicts...
Targets (1): skype-4.1.0.20-4
Total Installed Size: 35.64 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [######################] 100%
(1/1) loading package files [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) checking available disk space [######################] 100%
(1/1) installing skype [######################] 100%
Optional dependencies for skype
lib32-libcanberra: XDG sound support
lib32-libpulse: PulseAudio support
[root@tpx1c jiehan]# skype
ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
/usr/lib32/skype/skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory
[root@tpx1c jiehan]# exit
[jiehan@tpx1c ~]$ skype
ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
/usr/lib32/skype/skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory
[jiehan@tpx1c ~]$

Similar Messages

  • [Solved] Skype Won't Start

    Hi, I use [testing], [community-testing] and [multilib-testing] repo...
    After glibc update (yesterday), i'm no longer able to run skype:
    /home/umby>> skype
    zsh: command not found: skype
    /home/umby>>/usr/bin/skype
    [root@umberto umby]# pacman -Ql skype | grep bin
    skype /usr/bin/
    skype /usr/bin/skype
    [root@umberto umby]#
    Trying the full path
    /home/umby>> /usr/bin/skype
    zsh: file o directory non esistente: /usr/bin/skype
    /home/umby>>
    The package is updated:
    [root@umberto umby]# pacman -Qi skype
    Nome : skype
    Versione : 4.0.0.7-1
    URL : http://www.skype.com/
    Licenze : custom
    Gruppi : Nessuno
    Fornisce : bin32-skype=4.0.0.7
    Dipende da : xdg-utils hicolor-icon-theme lib32-qt lib32-alsa-lib lib32-libxss lib32-libxv lib32-libxcursor
    Dip. opzionali : lib32-v4l-utils: webcam support
    lib32-libcanberra: XDG sound support
    lib32-libpulse: PulseAudio support
    Richiesto da : Nessuno
    Conflitti con : skype-staticqt bin32-skype bin32-skype-staticqt
    Sostituisce : bin32-skype
    Kb richiesti : 34996,00 KiB
    Autore : Florian Pritz <[email protected]>
    Architettura : x86_64
    Creato il : gio 14 giu 2012 17:58:18 CEST
    Installato il : lun 09 lug 2012 16:34:23 CEST
    Motivo : Installato esplicitamente
    Script install : Sì
    Descrizione : P2P software for high-quality voice communication
    [root@umberto umby]#
    had anyone same problem?
    EDIT: I found this... i'm not the only one
    Last edited by KleinerMann (2012-07-14 09:42:12)

    yneveu wrote:
    Using glic from multilib and not multilib-testing resolved problem for me:
    sudo pacman -S multilib/lib32-glibc
    I had this problem with multilib/lib32-glibc 2.16.0-1 . Although the symlink was in the package file
    lib/ld-linux.so.2 -> ../usr/lib32/ld-linux.so.2
    pacman refused to create it.

  • Skype won't run on my desktop. Help?

     Just downloaded Skype on my desktop (Windows Vista Business). It seemed to download fine, however when I try to open it, nothing happens. No new window, no login prompt, nothing! I checked the task manager, and it wasn't showing up as an application (running or otherwise), but it was showing up in the process tab, eating up 50% of my CPU. Is there something I'm doing wrong?

    What is the version of Internet Explorer installed on your computer?
    In Internet Explorer go to Help -> About Internet Explorer.
    P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

  • [Solved] Spotify won't run in WINE

    Tried to install the Windows version of Spotify using WINE, it seems to install fine but doesnt run at all.
    When i run it from the terminal i can see this error -
    wine client error:41: write: Bad file descriptor
    libgcc_s.so.1 must be installed for pthread_cancel to work
    err:seh:raise_exception Unhandled exception code 80000101 flags 1 addr 0xf7712425
    heres a list of the following packages i installed from pacman -
    WINE (with all dependencies)
    lib32-mpg123, lib32-libxml2, lib32-openal, lib32-libpng
    pulseadio
    pulseaudio-gnome
    alsa-plugins
    alsa-oss
    Any ideas how to fix this error guys ?
    Last edited by cra1g321 (2011-02-24 16:56:53)

    olive wrote:I have installed spotify and it works. I see that there is a warning about libgcc_s.so.1. Is this file installed (owned by gcc-libs). If there is still a problem move spotify.exe launch it with a fresh WINEPREFIX.
    Checked out gcc-libs using pacman -Ss gcc-libs and it showed a lib32-gcc-libs on the list of packages.
    So installed it and spotify now runs fine,
    Thanks

  • [SOLVED] Gnome won't run

    I have installed hal, fam, fuse and Xorg, but my GNOME desktop doens't run. The following error message is printed when trying to # gnome-session
    ** (GNOME-session:3532): WARNING **: Cannot open display:
    EDIT: Never mind anymore, it worked fine when I ran it when actually using the Xorg . Thanks anyway!
    Last edited by KViiri (2009-06-11 07:24:53)

    Noooooooooob wrote:I can get to the Gnome file manager log in.
    You mean the gnome display manager
    Noooooooooob wrote:The main issue is when I'm at the prompt and type in: "exec gnome-session" I get:
    "bash:exec: gnome-session: not found".
    You want to just type "gnome-session".. the exec part is only used for the last line of the .xinitrc file. When you type in a binary (like gnome-session, firefox, etc), you simply type in that name.
    Sorry, this probably doesn't help with your fundamental questions/problems.

  • Counter-Strike Source won't run on x86_64

    [kinan@Asus Counter-Strike-Source]$ ./css.sh
    SDL video target is 'x11'
    SDL video target is 'x11'
    SDL failed to create GL compatibility profile (whichProfile=0)!
    This system supports the OpenGL extension GL_EXT_framebuffer_object.
    This system supports the OpenGL extension GL_EXT_framebuffer_blit.
    This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
    This system DOES NOT support the OpenGL extension GL_APPLE_fence.
    This system DOES NOT support the OpenGL extension GL_NV_fence.
    This system supports the OpenGL extension GL_ARB_sync.
    This system supports the OpenGL extension GL_EXT_draw_buffers2.
    This system DOES NOT support the OpenGL extension GL_EXT_bindable_uniform.
    This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
    This system supports the OpenGL extension GL_ARB_map_buffer_range.
    This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
    This system supports the OpenGL extension GL_ARB_occlusion_query.
    This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
    This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
    This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
    This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
    This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
    This system supports the OpenGL extension GL_ARB_framebuffer_object.
    This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
    This system supports the OpenGL extension GL_ARB_debug_output.
    This system DOES NOT support the OpenGL extension GL_EXT_direct_state_access.
    This system DOES NOT support the OpenGL extension GL_NV_bindless_texture.
    This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
    This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
    This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
    This system DOES NOT support the OpenGL extension GL_NVX_gpu_memory_info.
    This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
    This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
    This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
    This system supports the OpenGL extension GL_ANGLE_texture_compression_dxt3.
    This system supports the OpenGL extension GL_ANGLE_texture_compression_dxt5.
    This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
    GL_NV_bindless_texture: DISABLED
    GL_AMD_pinned_memory: DISABLED
    GL_EXT_texture_sRGB_decode: AVAILABLE
    Using breakpad crash handler
    [S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
    [S_API FAIL] SteamAPI_Init() failed; unable to locate a running instance of Steam, or a local steamclient.so.
    Did not detect any valid joysticks.
    GL_NVX_gpu_memory_info: UNAVAILABLE
    GL_ATI_meminfo: UNAVAILABLE
    GL_MAX_SAMPLES_EXT: 8
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    (hl2_linux:24961): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    Gtk-Message: Failed to load module "canberra-gtk-module"
    CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 2267 MHz, Processor: GenuineIntel
    GlobalMemoryStatus: 3996123136
    CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 2267 MHz, Processor: GenuineIntel
    GlobalMemoryStatus: 3996123136
    [0711/200103:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
    IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
    GL sampler object usage: ENABLED
    GL prefer MapBufferRange: NO
    Inconsistency detected by ld.so: dl-open.c: 678: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
    Any ideas?
    Last edited by kinan9011 (2014-07-12 08:14:33)

    When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    It makes the code more readable and - in case of longer listings - more convenient to scroll through.
    Please fix your post.

  • FMS won't run on RHEL 6.2 EC2 instance - _defaultRoot__edge1 experienced 1 failure

    I've got a fresh RHEL 6.2 64-bit instance on EC2. I've turned off the firewall and have  installed an FMS 4.5 dev server. In the logs directory I have admin and master logs (only). The admin logs look ok:
    #Fields: date
    time
    x-pid
    x-status
    x-ctx
    x-comment
    2012-02-29
    09:24:26
    1144
    (i)2581173
    FMS detected IPv6 protocol stack!
    2012-02-29
    09:24:26
    1144
    (i)2581173
    FMS config <NetworkingIPv6 enable=false>
    2012-02-29
    09:24:26
    1144
    (i)2581173
    FMS running in IPv4 protocol stack mode!
    2012-02-29
    09:24:26
    1144
    (i)2581173
    Host: ip-10-204-143-55 IPv4: 10.204.143.55
    2012-02-29
    09:24:26
    1144
    (i)2571011
    Server starting...
    2012-02-29
    09:24:26
    1144
    (i)2631174
    Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
    2012-02-29
    09:24:27
    1144
    (i)2631174
    Listener started ( FCSAdminAdaptor ) : 1111/v4
    2012-02-29
    09:24:28
    1144
    (i)2571111
    Server started (./conf/Server.xml).
    The master logs contain these lines, repeating every 5 seconds:
    2012-02-29
    10:43:17
    1076
    (i)2581226
    Edge (2790) is no longer active.
    2012-02-29
    10:43:17
    1076
    (w)2581255
    Edge (2790) _defaultRoot__edge1 experienced 1 failure[s]!
    2012-02-29
    10:43:17
    1076
    (i)2581224
    Edge (2793) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
    The FMS install failed, complaining about a missing libcap.so until I installed the libcap.i686 package. The following libcap packages are now installed:
    libcap.i686               
    2.16-5.5.el6    
    @rhui-us-east-1-rhel-server-releases
    libcap.x86_64             
    2.16-5.5.el6    
    @koji-override-0/$releasever
    libcap-ng.x86_64          
    0.6.4-3.el6_0.1 
    @koji-override-0/$releasever
    libpcap.x86_64            
    14:1.0.0-6.20091201git117cb5.el6
    Any help would be most appreciated.
    /Ed.

    I had the same problem on CentOS 6.2 x86_64, albeit not on EC2. It seems that the installer creates a symlink to the i686 libpcap (libcap.so.1 -> /lib/libcap.so.2) and fmsedge won't run with it. Manually removing that symlink and instead linking to the libcap.so.2 in /lib64 solved the problem for me.
    cd /opt/adobe/fms
    rm libcap.so.1
    ln -s /lib64/libcap.so.2 libcap.so.1
    HTH, Jeremy

  • Skype won't sign in here is the log file.

    Skype won't sign in and I have tried a lot of things. I just followed the instructions here just to get the log file. I don't know if I did it right. https://support.skype.com/en/faq/FA12233/what-should-i-do-if-i-get-a-blank-blue-screen-when-i-try-si...
    Solved!
    Go to Solution.
    Attachments:
    debug-20141006-1138#1.zip ‏983 KB

    Try to reset all Skype settings.
    Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
    Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
    Restart Skype.
    N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

  • Safari, Mail, iTunes and Skype won't open

    Hi there Apple-Support-Team,
    a few days ago I did an update of Safari, suggested automatically by Apple, but wasn't sure if the update was successfull (I had to leave the house).
    Now all applications with internet connection (Safari, Mail, iTunes, Skype) won't open anymore. Not from the dock or the application folder. I checked my internet connection which seems to be working.
    I've seen quite some reports in this forum but I am not sure if I'm having the same trouble as the other users. I get no error reports or anything else, the apps just don't open.
    Mac OS X version 10.4.11
    Safari 3.0.4
    Many thanks
    Mexximexx

    Welcome to the forums!
    Did you restart your Mac after the install?
    If your Safari keeps crashing, or if you are updating Safari (or just have) and it is misbehaving:
    N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings, and don't change the application's name or move it from the top level of the Applications Folder to a sub-folder.
    (If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall. Alternatively you can download Safari directly:
    Safari 4.1.1 for Tiger can be downloaded here:
    http://support.apple.com/kb/DL1069
    Safari 5.0.1 for Leopard (and Snow Leopard) can be downloaded from here:
    http://support.apple.com/kb/DL1070
    Make sure you download the correct version for your system.
    Also, observe the recommended procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now Tiger uses Safari 4.1.1 and Leopard uses Safari 5.0.1, as does Snow Leopard albeit a different version. If these latest versions of Safari are not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to a previous version of Safari can have repercussions, as previous versions of Safari used a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet, and the dreaded CT Toolbar. If you have them, trash them and go the developer's sites to see if new versions are available for the latest version of Safari on your current operating system.
    You must also ensure that you have downloaded and installed all the correct version for your Mac of Security Updates. These require a restart and a permission repair.
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • Hard Disk/Library/InputManagers
    • Home/Library/InputManagers
    especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
    Lastly, the Safari updates require a restart of your Mac, and sometimes even a double restart is required.

  • Dv7 Laptop won't run on battery

    Laptop Data&colon;
    [Image Removed]
    Upon unplugging my laptop last night, it simply shut off, and since won't run off of the battery. It seems like the battery isn't connecting to the motherboard, but I ran a test in the support assistant that gives me this:
    [Image Removed]
    Is one of the cells dead, and that is why it isn't working, or could it still be failure to connect to the motherboard?
    I have another battery, but unfortunately not currently with me. 
    The battery also won't charge past 86%, but again, I'm unsure of the cause. I left it out overnight and long held the power this morning to no avail as well.
    Any help is appriciated. Thanks.

    I understand your notebook battery no longer powers the notebook and the battery test has failed.
    Reviewing the battery test, it looks like the battery (when fully charged) is only holding about 35% of the original charge.  This means that the battery life wont' last very long as it will drain much faster.  This is the most likely reason that the battery is no longer functioning is that it has reached the end of its usage.  The battery test requires the battery to interface with the motherboard for it to test the battery, so I don't find the motherboard very likely at this point since the test was able to detect the battery.
    You stated you have another battery to try.  Try using that battery at your convenience to see if it can power up the notebook before purchasing a new battery.  Should you proceed with a new battery, the replacement part number should be listed on the current battery.
    Let me know if this answered your question.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Itunes installer won't run in Windows 7

    I am trying to install the latest version of itunes on my new laptop and the installer won't run.  It is a samsung sereis 7 notebook running Windows 7.
    I have downloaded itunes multiple times and tried running as administrator.  I do not get any error, and occasionally a progress bar will flash up on screen for a couple of seconds but then nothing happens.  Other times I don't even get the progress bar, just nothing happens when I try to open the installer.
    Would appreciate any help with this problem.  Its driving me crazy not being able to add new music to my ipod!

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Pavilion 23t AIO PC won't run Battlefield smoothly

    My father bought me the Pavilion 23t AIO, thinking that it would be a good gaming computer, but upon me testing my game Battlefield 3 with the normal graphics and settings, and the game was incredibly laggy. I changed the settings to the lowest, and the game still won't run completely smoothly, and twice it closed itself out on me. I'm wondering if I need a new graphics card or not, please respond quickly!!
    This question was solved.
    View Solution.

    SniperProffesor, welcome to the forum.
    The good news is, you have very nice computer.  The bad news is, it is not good for gaming.  The video card slot is MXM (One PCI Express MXM slot that supports a PCI Express x16 graphics card (Generation 2 speed).  Here are the specs on it:
    One Mobile PCI Express Module (MXM) socket
    MXM 3.0 version: Type A
    <35W
    It is difficult to find these video cards because they are usually sold as OEM components.  Your best bet would be to shop ebay for one.  I am not certain that this card would even make your gaming experience better.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Add-on won't run on some clients

    As soon as an add-on users de DI SDK, it crashes at startup on some systems and I don't know why.
    I'm using the DI Basic Operations example that came with the SDK. I build it, and used the SAP B1 SDK setup .NET Wizard to create the installer and licence file. The istallation goes fine, but the addon itself crashes. with a useless "the program has performed an illegal operation and will be shut down" error message (see below)
    I also tried other ways to run the add-on (among others directly from visual studio or from the command line, with the developer licence number as argument) but allways with the same result. At one system all goes well, at the other a crash occurs even before the debugging can start.
    I have no idea what this error message is trying to tell me:
    System.Runtime.InteropServices.COMException (0x80040154): COM object with CLSID {A355004F-AAB4-41D3-BDE0-7EAED1ED5FFF} is either not valid or not registered.
       at Project1.BasicOperations.InitializeCompany()
       at Project1.BasicOperations.BasicOperations_Load(Object eventSender, EventArgs eventArgs)
       at System.Windows.Forms.Form.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Most of the time however, I get a much less helpfull error saying there was some unidentified illegal operation.
    Something that is possibly related is a problem with the references. On a PC where the add-on crashes I don't have the SAP DI as reference in the .NET and COM tabs, only the SAP UI. When I open an example the DI reference is reporting an error (not found) , but when I add the reference as a file, all is well. (The project now compiles with no errors or warnings, it still crashes when I start it.
    The problem already occured when only SBO was installed (which should be sufficient to run the add-on? You don't need to have the SDK installed I presume). I installed the SDK and later even Visual Studio, but this didn't help.
    I've reinstalled SBO several times (I even deleted the sbo program files directory before installing SBO again) but this didn't change anything.
    (I'm using 2004a)
    Does anyone know what could cause this problem?

    I know that, but that didn't help.
    Is there any way to find out which versions of the DI API a SBO client is currently using?
    We've re-installed the clients and DI API using the shared folder on the server, but that didn't help. (maybe some old dll was locked and couldn't be removed (without any notice of that happening) and is still being used?)
    One system indeed didn't have the DI API installed and the problem was solved a bit (my own plug-in now works fine, but the "DI basic operations" example of the SDK crashes when connecting to a company database.)
    We've now got 3 machines running my add-on without any problems (the server and 2 notebooks) and 1 notebook who won't run my add-on at all.
    The DI basic operations Example of the SDK won't run on any of the notebooks, only on the server.
    On one notebook it crashes when I click "choose company DB" (which should give me a list of available companies) on the other notebook it crashes when I try to connect to a (any) specific company database and on the third notebook it gives an empty list and won't connect to anything (but doesn't crahs)
    this is all 100% reproducable.
    All machines run the SBO client and UI add-ons perfectly, only the DI seems to cause problems.
    another weird problem that might be related, is that I need to compile my add-on as "debug". When I compile it as "release", it won't run on any of the notebooks, only on the server.

  • FCE 2.0.3 won't run on PowerPC G5 Quad

    Hello,
    I know there are a few threads about this subject, but my copy of FCE 2.0.3 won't run on G5 Quad. I get the same error messages (AGP card needed, G4 needed) and by editing the info.plist file I am able to get rid of the 'AGP card needed' message, but the 'G4 needed' is very stubborn. Changing G4 to G5 in the info.plist file does not solve this problem. So the suggested solutions don't seem to work now.
    Has someone else (maybe Apple, through an update...) a solution?
    Peter

    Forgive me if I am wrong, but I suspect some people may be saving the .plist incorrectly. I don't know whether you are but just in case I have copied this from one of the other threads. You of course will have to alter the "G4" as well:-
    You just open the .plist with TextEdit etc.
    Then do what is detailed below and nothing more:-
    When you have changed the letters AGP to PCI you simply close the window by clicking on the red button (top left).
    A drop-down window will appear asking if you want to save the changes.
    Click "Save" - the window disappears and the job is done.
    Ian.
    PS. I have just remembered that someone in those threads actually said that editing .plists in OS 10.4 was difficult or even impossible. I don't know how true that is . Good Luck!

  • Illustrator won't run, instead AAM tries to run

    Hi all,
    When I try to run an application form CS6, e.g. Illustrator or InDesign, they won't. Instead the Adobe Application Manager tries to run, but hangs/freezes. I need to force-quit AAM, but then again, none of the CS apps won't run/start, and AAM tries to run again, and freezes and so on and so on.
    How can I get my apps to run again (and get rid of AAM trying to run).

    Solved it !!!
    Restarted my iMac, and then reinstalled AAM.
    Everything is working again.
    (But still don't know why it went wrong in the first place, though)

Maybe you are looking for