[Solved] Spotify won't run in WINE

Tried to install the Windows version of Spotify using WINE, it seems to install fine but doesnt run at all.
When i run it from the terminal i can see this error -
wine client error:41: write: Bad file descriptor
libgcc_s.so.1 must be installed for pthread_cancel to work
err:seh:raise_exception Unhandled exception code 80000101 flags 1 addr 0xf7712425
heres a list of the following packages i installed from pacman -
WINE (with all dependencies)
lib32-mpg123, lib32-libxml2, lib32-openal, lib32-libpng
pulseadio
pulseaudio-gnome
alsa-plugins
alsa-oss
Any ideas how to fix this error guys ?
Last edited by cra1g321 (2011-02-24 16:56:53)

olive wrote:I have installed spotify and it works. I see that there is a warning about libgcc_s.so.1. Is this file installed (owned by gcc-libs). If there is still a problem move spotify.exe launch it with a fresh WINEPREFIX.
Checked out gcc-libs using pacman -Ss gcc-libs and it showed a lib32-gcc-libs on the list of packages.
So installed it and spotify now runs fine,
Thanks

Similar Messages

  • [Solved] Skype won't run on x86_64

    [jiehan@tpx1c ~]$ sudo pacman -Q skype
    skype 4.1.0.20-4
    [jiehan@tpx1c ~]$ skype
    ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
    /usr/lib32/skype/skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory
    [jiehan@tpx1c ~]$
    Any ideas?  Thanks.
    UPDATE: Reinstalling lib32-alsa-lib and lib32-libxv made Skype to run.  I don't know what made these packages corrupted.
    However, I ran into a new issue, and this is what I get now:
    [jiehan@tpx1c ~]$ skype
    ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
    Inconsistency detected by ld.so: dl-open.c: 684: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
    UPDATE: Reinstalling lib32-alsa-plugins lib32-glib2 lib32-libogg, which seem to be corrupted on my filesystem for some reason, finally solves this issue.  Thank you everyone.
    Last edited by jiehanzheng (2013-03-03 02:44:19)

    theodore wrote:...uninstall it and install it again.
    I did not.  Just tried but it still won't run...
    [root@tpx1c jiehan]# pacman -R skype
    checking dependencies...
    Targets (1): skype-4.1.0.20-4
    Total Removed Size: 35.64 MiB
    Do you want to remove these packages? [Y/n]
    (1/1) removing skype [######################] 100%
    [root@tpx1c jiehan]# pacman -S skype
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): skype-4.1.0.20-4
    Total Installed Size: 35.64 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [######################] 100%
    (1/1) loading package files [######################] 100%
    (1/1) checking for file conflicts [######################] 100%
    (1/1) checking available disk space [######################] 100%
    (1/1) installing skype [######################] 100%
    Optional dependencies for skype
    lib32-libcanberra: XDG sound support
    lib32-libpulse: PulseAudio support
    [root@tpx1c jiehan]# skype
    ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
    /usr/lib32/skype/skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory
    [root@tpx1c jiehan]# exit
    [jiehan@tpx1c ~]$ skype
    ERROR: ld.so: object '/usr/share/skype/lib/libQtWebKit.so.4' from LD_PRELOAD cannot be preloaded: ignored.
    /usr/lib32/skype/skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory
    [jiehan@tpx1c ~]$

  • Lightroom 5.6 won't run on Win 7 6 after upgrade through CC

    Upgrading Lightroom to 5.5 stopped it from running. I found a fix on the net and moved on.
    Now. Lightroom 5.6 has just upgraded and now it won't run. Also, I cannot find a fix - new or old.
    This is very frustating..
    Please help

    Installing the standalone version just postpones the problem until you install the cloud version, again.
    The SLCache folder has bad data in it that confused LR 5.5 and again LR 5.6 until it was cleared, via Solution 4 on this page.  Of course there could be other issues, so trying each of the solutions in order could be useful, but Solution 4 is the one that finally worked for me, with LR 5.5 on my home computer, and LR 5.6 on my work computer, where I'd installed the standalone 5.5 to bypass the issue and it came back with LR 5.6:
    Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update
    Once you remove the contents of the SLCache folder other Adobe programs will ask to be relicensed like Elements via a serial number or the cloud programs by logging in, but that is just once after you clear it not each time.

  • HP Solution Center won't run in Win 10

    I hava Photosmart 6525 All-In-One printer.  I just updated my Windows 7 OMNI All-In-One desktop to Windows 10 and and now the HP Solution Center won't run.  I get "HP Solution Center cannot run because your device installation is not complete".  The printer works great; however I can't scan.  I have uninstalled and re-installed the printer and software four times.  Every time it installs with no problem but the Solution center won't run.  Is there a fix for this?

    Hi,The HP Solution Center is not a part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new one. The HP Photosmart 6525 provided with the HP Printer Assistant software, to launch its software type HP into the search bar and open the HP Photosmart 6520 software. As a refernce see the 'How can I find HP Solution Center for a printer manufactured after 2011?' section below:http://support.hp.com/us-en/document/c02463264 Regards,Shlomi

  • Spotify won't run on my IdeaPad S12

    Hi!
    A few months ago, I bought myself the Lenovo IdeaPad S12 and I am very satisfied with this netbook.
    However, I'm not able to run Spotify on this computer.
    I replaced Windows XP with Ubuntu Netbook Remix (first, I tried with Ubuntu 9.10, but it wouldn't run as smooth as I thought it would do....), and I installed Wine and thereafter I installed Spotify. When I had Ubuntu 9.10 running, it worked for a few days, before Spotify collapsed. On Ubuntu NR it won't play music at all. That said: It will play for a few seconds, but it's not possible to hear that this actually is music, it's just noise.....
    When I try later on I get the message: "There is a problem with your soundcard. Spotify can't play music".
    I've tried to get the sound to work with Wine Config, and I do get a sound when I press "Test Sound", but Spotify is as useless as it were before I started Wine Config.
    Can anyone help?? I'm getting a bit frustrated.....

    Never mind, I finally got it to work.... I accidently restarted my computer - and then it worked.....

  • Executable built in Win 7 LabVIEW won't run in Win XP

    I'm using the "Invoke Node" function and and calling its "GetVersionInfo" property. When I make an executable, it runs fine under Win 7 but has a broken arrow under Win XP, and the error box says:
    "The VI is not executable. The full development version of LabVIEW is required to fix the errors."
    Now if I had an extra copy of LabVIEW to put on this machine, I'd slap a "full development version of LabVIEW" on that XP box. Let me check my wallet. NOPE, I do not have a spare $2,700! Is there another way to make this VI work?
    I've attached the VI and executable.
    Attachments:
    win_7_to_xp_problem.vi ‏12 KB

    I'm not sure about this.
    The reason is because the GetVersionInfo has to work differently between 64bit OS than with 32bit OS. I don't know what (if any) dependency is compiled into the EXE for this (running WoW64 vs. generic 32bit)....
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • [SOLVED] Steam fails to run under Wine

    Hello,
    Recent Ubuntu -> Arch user here, so go easy on me!
    I run Steam under Wine. Once it logs in, the main and update news windows appear, and so do '$FRIEND is currently playing $GAME' boxes. That's all fine, until Steam completely dies/disappears a second or two later. It looks like it just can't find a load of necessary libraries; I know the files don't exist, but should they? If not, why is Wine looking for them?
    As far as I know, all Wine dependencies (incl. optional) are installed. The Gecko extension too. I searched far and wide and installed whatever lib32 (including lib32-catalyst-utils) packages I could find in relation to Wine problems. The 64-bit Catalyst drivers are installed and working.
    I did follow the wiki and I did search on Google, these forums and the bug tracker, but nothing has worked.
    $ uname -a
    Linux pr0scarch 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010 x86_64 AMD Phenom(tm) II X6 1055T Processor AuthenticAMD GNU/Linux
    $ wine --version
    wine-1.3.10
    $ cd ".wine/drive_c/Program Files (x86)/Steam"
    $ WINEDEBUG=warn+all wine ./Steam
    Due to a measly scrollback of "only" 5000, I didn't get all of the log, but I think this is 99% of it and that it might contain relevant info: http://www.resiiign.com/~coconut/steam.log
    Any ideas?
    Thank you!
    Last edited by xlatedst (2011-01-06 19:31:39)

    Thanks cebru, that was the problem.
    Now I just need to tweak things so that games work well. CS 1.6 is flawless so far.
    Thank you again!

  • Active x made on win95 won't run on win 2000/xp

    Hi
    My application is built on win xp/office 2000 Excell. Intention is to run it on win 95/office 97 Excell - machine.
    Labview version is 6.02. Lv collects data from a data-logger and finally generates an Excell report using Active X.
    Everything else goes fine except Active X part. Some method nodes (Range/PasteSpecial, Range Copy, Range Select etc.) are gray in diagram and they have to be recreated in win95. Most of the nodes operate ok.
    Is there any way to make it work. Thanks in advance for any help.

    Hi Martti
    Microsoft changed its underlying Active X Object Model between the two different releases of Office 97 and Office 2000, that's the reason why you've to change some methods and properties.
    Check this too:
    http://digital.ni.com/public.nsf/3efedde4322fef198​62567740067f3cc/d4d32d45ead5830186256bd800506a41?O​penDocument
    Luca
    Regards,
    Luca

  • Philips VOIP phone install won't run on Win 7

    Hi -
    I've got a Philips VOIP 0801B/37 phone. It has an install disk. When I run the install disk it says it only runs on Windows 2000 and Windows XP.
    What I want is the microphone. What does it take to get a bigger selection of microphones in the Skype dropdown list of microphones? All that shows for me is a single microphone for any of my headsets (a Realtek microphone). The Echo Sound Test Service does not record any messages when I try it.
    Doug

    Installing the standalone version just postpones the problem until you install the cloud version, again.
    The SLCache folder has bad data in it that confused LR 5.5 and again LR 5.6 until it was cleared, via Solution 4 on this page.  Of course there could be other issues, so trying each of the solutions in order could be useful, but Solution 4 is the one that finally worked for me, with LR 5.5 on my home computer, and LR 5.6 on my work computer, where I'd installed the standalone 5.5 to bypass the issue and it came back with LR 5.6:
    Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update
    Once you remove the contents of the SLCache folder other Adobe programs will ask to be relicensed like Elements via a serial number or the cloud programs by logging in, but that is just once after you clear it not each time.

  • DAQ program compiled under Win2k won't run under Win 95.

    When I compile a LabView 5.1.1 vi program that uses lvdaq.dll on my Windows 2000 workstation, that same program will not run on a Windows 95 notebook computer. Error code 21 (external subroutine could not be found) is reported for all standard DAQ vi's calling functions within lvdaq.dll even though the dll can be found in the program directory, the system directory, the vi.lib\daq directory, and via the system path. The same program compiled on a Windows 95 workstation runs on the Windows 95 notebook computer just fine. Why is lvdaq.dll not found when the program is compiled under Windows 2000? Do I need the same version of NI-DAQ on both computers?

    Larry;
    If you are doing NI-DAQ function calls on your VI you need to match the NI-DAQ version on both machines, otherwise, depending on what functions you are calling and what are the NI-DAQ versions, you might get some errors. Just for future reference, this procedure is good for NI-VISA (if you are using VISA VIs) and NI-488.2 (if you are using GPIB boards) as well.
    Regards
    Filipe Altoe
    Application Engineer
    National Instruments

  • [SOLVED] Gnome won't run

    I have installed hal, fam, fuse and Xorg, but my GNOME desktop doens't run. The following error message is printed when trying to # gnome-session
    ** (GNOME-session:3532): WARNING **: Cannot open display:
    EDIT: Never mind anymore, it worked fine when I ran it when actually using the Xorg . Thanks anyway!
    Last edited by KViiri (2009-06-11 07:24:53)

    Noooooooooob wrote:I can get to the Gnome file manager log in.
    You mean the gnome display manager
    Noooooooooob wrote:The main issue is when I'm at the prompt and type in: "exec gnome-session" I get:
    "bash:exec: gnome-session: not found".
    You want to just type "gnome-session".. the exec part is only used for the last line of the .xinitrc file. When you type in a binary (like gnome-session, firefox, etc), you simply type in that name.
    Sorry, this probably doesn't help with your fundamental questions/problems.

  • Firefox won't run, but says it is when I try to unistall it - Win 7 task manager says it isn't..how can I get around this to uninstall it?

    I have been trying to open a browser window with Mozilla Firefox 6.0.2 (x86 en-US). It won't run, however, when I try to uninstall the program, it says I have to close firefox first. Win 7 task manager does not show the program as running.
    I tried again, and still get the same message from Firefox. I checked the task manager again, not running. Tried running it - won't run. Tried uninstall, got the same message, close firefox before trying to uninstall - firefox isn't running!
    I would appreciate any help that you could give me. I want to use firefox, especially since it is the browser that opens Webkinz correctly for my grandkids.

    In the task manager, are you looking at Processes? That is where you find Firefox listed when you see no interface, not in Applications.
    This page might have some useful information about that problem.
    * http://kb.mozillazine.org/Profile_in_use

  • I downloaded PSE12 trial to Win 7 non admin temp folder.  It won't run and I can't download it again

    I downloaded PSE 12 trial to Win 7 non-admin temp folder.  It won't run and I can't download it again.

    Hi,
    Try to launch Setup.exe as Run as administrator(Right click setup.exe -> Choose Run as administrator)
    -Shikha

  • Itunes won't run, Win 7 Pro 64 Bit

    Itunes 11.0.1 will not run. For that matter 10.X won't run either. I am running Windows 7 Pro 64 Bit. Multiple uninstall's and reinstalls, still no joy. I am extremely displeased (I own 5 Apple products crippled by this).

    Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

  • HP Pavilion 23t AIO PC won't run Battlefield smoothly

    My father bought me the Pavilion 23t AIO, thinking that it would be a good gaming computer, but upon me testing my game Battlefield 3 with the normal graphics and settings, and the game was incredibly laggy. I changed the settings to the lowest, and the game still won't run completely smoothly, and twice it closed itself out on me. I'm wondering if I need a new graphics card or not, please respond quickly!!
    This question was solved.
    View Solution.

    SniperProffesor, welcome to the forum.
    The good news is, you have very nice computer.  The bad news is, it is not good for gaming.  The video card slot is MXM (One PCI Express MXM slot that supports a PCI Express x16 graphics card (Generation 2 speed).  Here are the specs on it:
    One Mobile PCI Express Module (MXM) socket
    MXM 3.0 version: Type A
    <35W
    It is difficult to find these video cards because they are usually sold as OEM components.  Your best bet would be to shop ebay for one.  I am not certain that this card would even make your gaming experience better.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for

  • Disk Repair and Corrupt Hard Drive

    I just replaced the hard drive on my iMac because the computer kept hanging and occasionally shutting down.  I've run Disk Utility many times over many months on the old hard drive and the message I received is that the hard drive was corrupt and nee

  • Files to download without any permissions for guest user.

    Hello, i have created a KM Navi Iview, with path to /documents/.../... When i go to http://portal/irj/portal/anonymous i see a list of files, but i can copy,delete and rename files (permissions for guest are: read), how can i solve this, if i need on

  • What are the ranges for correct skin tones using RGB%?

    What are the ranges for correct skin tones using RGB%?  Used to using a scale from 0 to 255.  But with LR it's RGB  , I know 100% RGB is white.  What do you use for %?

  • Functin module return problem.

    Hi all, I have created a function module. I want to export my internal table output. In the src code of the fn module i have declared itab_output table.and i couldn't export it. If i try to give the same name itab_output in the table tab/export tab i

  • Iphone5 cannot connect bluetooth with mac

    my mac tells me Im paired to use bluetooth but my iphone 5 states not connected. help!!