[SOLVED] Suppress libva/vaapi output
I specified vaapi as the video driver for MPlayer, and every time it plays, it spits out output from libva about loading the VA-API driver.
Is there a way to suppress this output? I tried the "-really-quiet" option, and that hid everything else but this output.
Last edited by mellowmaroon (2013-04-26 04:49:16)
Sorry for taking so long to reply, I've been busy working on stuff for the end of my school semester.
I meant to ask if there was any way it could be done through configuration options or actual parameters, since I also want youtube-viewer to not spit out all the libva info.
Your method works, mar04, but I guess I would have to make an alias for mplayer. I want to really be sure there is no cleaner way before I look into doing that.
Is there a compilation option for libva that might allow me to suppress its output?
Similar Messages
-
VLC very slow when using libva/vaapi on a Sandy Bridge HD3000
Hi,
this Problem is driving me crazy. On my X220t Laptop i am trying to get the vaapi in vlc working.
my vainfo output:
libva: VA-API version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/i965_drv_video.so
libva: va_openDriver() returns 0
vainfo: VA-API version: 0.32 (libva 1.0.15)
vainfo: Driver version: Intel i965 driver - 1.0.15
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileH264Baseline : VAEntrypointVLD
VAProfileH264Baseline : VAEntrypointEncSlice
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileVC1Simple : VAEntrypointVLD
VAProfileVC1Main : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
Video acceleration with mplayer is working fine, but with vlc is not. But i want to use vlc
When i activate the GPU acceleration in the codecs tab the video becomes very choppy an slow. It's like one frame every 2-4 seconds. Unwatchable.
I've tried different Versions from 1.1.x to 2.x and its the same every time. Don't get me wrong without vaapi the video ist smooth but my cpu usage is around 50%. I want to bring it down to save some power when i'm on battery.
Thanks for your helpI haven't been able to get vaapi working with VLC yet on my X220, but I have found if you use Compiz (or add a clutter environment variable if you use the Gnome 3 shell), the video output is pretty good in VLC. I am using VLC successfully in Arch XFCE, Fedora 16 Gnome, and Mageia 1 KDE.
-
[SOLVED] No sound, dummy output
I have no sound on my arch linux installation, and I believe it may be related to updating my kernel. Two weeks ago I had sound working perfectly, however just yesterday I noticed that my output device is listed as "Dummy Output"
I use the following two pulseaudio packages:
pulseaudio 6.0-1
pulseaudio-alsa 2-3
Output from "cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7b14000 irq 32
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7b10000 irq 31
Output from "lspci -nn"
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5)
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5)
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d5)
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d5)
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM87 Express LPC Controller [8086:8c4b] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
01:00.0 3D controller [0302]: NVIDIA Corporation GK106M [GeForce GTX 765M] [10de:11e2] (rev a1)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller [1969:e091] (rev 13)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
05:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter [10ec:8723]
Last edited by hextet (2015-02-16 17:21:29)Nevermind I solved the problem!
Simply deleted the director ~/.config/pulse, rebooted, and everything worked! -
Leading zeroes are being suppressed in excel output
I have a template that prints our item number field. This field is alpha-numeric, but sometimes it is all numeric with leading zeroes. I have it defined as a text field in my template. It prints correctly (with the leading zeroes) in the PDF output, but it suppresses the leading zeros in the excel output. Is there any way to stop it from doing this - I want it to be a text field.
Thanks. That sort of works. In the excel output, it is truncating the field after the first 4 digits even though the length is defined as 'unlimited'. In the PDF output, it prints the double quotes around the field.
-
[solved]cat with colored output?
just wondering if there is a app like cat, that outputs a file, but with vim/emacs' highlight and line numbering. (or some short of hack)
Why? well, I'm playing around with some C++ and I have multiple little files that I'd like to see on the shell before/after I run g++, and something like that would be quite useful.
Last edited by hack.augusto (2009-10-22 01:13:20)@bl1nk
that's exactly what I imagined for highlight, thanks.
@Ghost1227
`cat -b` ignores blank lines, `cat -n` solved the problem , thanks
[update]
community/colorgcc is kinda cool too
Last edited by hack.augusto (2009-10-22 01:16:24) -
[SOLVED] Can't send output to external monitor
I've got a Dell Inspiron 1501 laptop which I sometimes use to give presentations at my school. Last time, in mid october, it worked perfectly, but now my laptop and the digital projector seem to ignore each other. The only difference between last time and now is that I've updated the system.
This is output of xrandr -q:
$ xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096
VGA-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 61.0*+
It says that VGA-0 is disconnected, which isn't the case. I've tried pressing Fn+CTR/LCD but it doesn't make any difference.
Can anyone tell me if I am missing something? What's wrong? Why doesn't it work now if it worked fine just over a month ago? Is this a problem with the new X server?
I know I'm asking a lot of questions, but I'd really appreaciate any help. I wouldn't like my students to get the idea that Linux is unreliable (or maybe that I'm just not smart enough).
Cheers
Last edited by troncoso (2009-12-18 19:47:58)Thanks for answering. Yes, it has an integrated ATI card, and I'm running the radeon driver without an xorg.conf. This is what "lspci -v" says about the card:
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] (prog-if 00 [VGA controller])
Subsystem: Dell Device 01f5
Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 17
Memory at c8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
Cheers -
SOLVED: Getting an Input/Output error when accessing certain files
My system started failing a few days ago because of sudden Input/Output errors when trying to access certain files. It was running fine until various applications started crashing like for example Pidgin (in retrospect probably because of DBus crashing). I decided to reboot and now can't login anymore because the DBus module fails to load which in turn means that HAL doesn't load either and so I can't use my keyboard to login.
The error message I get from DBus is that it can't access the file /etc/dbus-1/system.d/org.freedesktop.PolicyKit.conf because of an Input/Output error. I tried to fix/see what was wrong using the arch livecd. Because I thought my problem had to do with a pacman update that had failed before I'd rebooted, I updated my system and I noticed that when pacman tried to access other files it came back with the same error message. The files seemed pretty random, one of them was fakeroot.conf and then several library files like libfaad (sorry this is kind of vague but I'm away from home right now and can't go online very often so I'm writing this from memory).
I'm guessing its a hard drive problem because checking the filesystem for errors came back with nothing. I was just wondering whether anyone had any other ideas before I go and reinstall. I'm going back home tomorrow so I'll be able to follow any advice/reinstall then.
Last edited by siell (2010-04-08 17:01:37)UPDATE
It seems to be fixed! The second run of e2fsck fixed some more issues and the files that were causing the problems earlier seemed to have bad inodes. Boots fine now and I can get into my system. I checked and I still have a reasonable amount of free space so I don't think that was the reason ... I have no idea how the filesystem got so corrupted out of nowhere.
A few things are different, for example, it asked me to unlock the keyring and I couldn't mount my external encrypted drive anymore and had to do it manually with cryptsetup. e2fsck made quite a few changes so I imagine it's due to that. Shouldn't be to hard to fix though.
Thanks for your help! -
[SOLVED] No HTML5 Audio output in Firefox
Hi folks, it seems I don't have any HTML5 audio output within Firefox and was hoping I could get some advice. Here's a run down of the situation:
Everything is unmuted in alsamixer.
Audio works through ALSA with every other application I've tried such as moc, vlc, mplayer etc.
I have an .asoundrc file which correctly sets the default and an alias for another card. I use it to switch audio when using mplayer sometimes.
I've used various HTML5 test pages that report audio tag and and playback is working.
Firebug console never reports any errors when trying to play audio within a page.
I've done a fair bit of searching but the documented solution is almost always to setup an .asoundrc config file, but I already have one.
Last edited by Xik (2014-02-22 14:04:25)Rasi wrote:of course you have all the gstreamer0.10-plugins installed...
Of course!
karol wrote:
See the optional dependencies: https://www.archlinux.org/packages/extr … 4/firefox/
What's the output of
pacman -Qs gst
local/gstreamer0.10 0.10.36-3
GStreamer Multimedia Framework
local/gstreamer0.10-bad 0.10.23-7
GStreamer Multimedia Framework Bad Plugin libraries (gst-plugins-bad)
local/gstreamer0.10-bad-plugins 0.10.23-7 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Bad Plugins (gst-plugins-bad)
local/gstreamer0.10-base 0.10.36-2
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.36-2 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.13-2 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.31-4
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.31-4 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-ugly 0.10.19-9
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.19-9 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly) -
[SOLVED] weird beagle-status output?
my system's gears were grinding a little more than usual, and while idle, i noted that beagle was using a tad more resources than it should. i checked beagle-status and found the following:
** (/usr/lib/beagle/Info.exe:6862): W10NING **: Symbol file /usr/lib/beagle/Beagle.dll.mdb has incorrect version (expected 50.0, got 39)
** (/usr/lib/beagle/Info.exe:7003): WARNING **: Symbol file /usr/lib/beagle/Beagle.dll.mdb has incorrect version (expe9ted 50.0, got 39)
** (/usr/lib/beagle/Info.exe:7015): WARNING **: Symbol file /usr/lib/beagle/Beagle.dll.mdb has incorrect version (expected 50.0, got 39)
it just seems to be spitting out the above in variations, and i don't really understand what's happening. it seems to still be organizing things, as every once in a while, it'll say something normal like Status Indexing in "home/krup/school/paper.odt" for instance, but the rest of the time it just spits out - what seems to me - gibberish.
i should note that i did upgrade this morning and besides the klib problem that was mentioned on the front page, i've had nothing else go wrong. anyone heard or experienced anything like this?
Last edited by krupintupple (2008-10-23 23:10:47)hey all, i figured out what was going on. well, not really. however, a few days after this message, beagle went down for the count. turns out *something* was wrong. informative, i know! however, i recompiled the package on my end and not only is it back, it's also not spitting out weird output.
here's the thread of interest, if ye discover you have the same ailment as i did:
http://bbs.archlinux.org/viewtopic.php?id=57557
Last edited by krupintupple (2008-10-23 23:16:02) -
Urgent! How to suppress indents in output from (XML , XSL) -- HTML
I make transformation (XML , XSL) --> HTML using parser v2 of Oracle XDK for Java v 9.2.0.2.0
I want to generate html in which several tags will follow one after another without new line, and indents.
Like this
<html>
<body>
<img src="1.jpg"/><img src="2.jpg"/>
</body>
</html>
Only in this case images will be visualized in IE5 together without spaces.
But xsl-processor is formatting output text: put each tag on new line and make indents for child tags.
I tried to
1) eliminate white spaces in xsl
2) use <xsl:output indent="no"/>
3) use <xsl:strip-space elements="*"/>
4) use method setPreserveWhitespace(true/false) of XMLParser (oracle.xml.parser.v2.XMLParser)
Xsl-processor continue to format output text.
my xml
<list>
<element name="1.jpg" />
<element name="2.jpg" />
</list>
my xsl
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html" indent="no"/>
<xsl:strip-space elements="*"/>
<xsl:template match="list">
<html><body>
<img src="{element[1]/@name}"/><img src="{element[2]/@name}"/>
</body></html>
</xsl:template>
</xsl:stylesheet>
html-output
<html>
<body>
<img src="1.jpg"/>
<img src="2.jpg"/>
</body>
</html>
Please help me!html-output
<html>
<body>
<img src="1.jpg"/>
<img src="2.jpg"/>
</body>
</html>
Please help me! -
[SOLVED]Need to parse output data
I have a program that outputs data to the console in this format:
[1] banana
[2] orange
[7] apple
[17] grape
[42] strawberry
I would like to strip this output and only get the values for [2] and [17]. So my output would be:
orange
grape
My first idea was to pipe the output to grep and then possibly use sed to strip the preceding numbers and brackets. What is the recommended way to do this and why? Is there a better suited utility that I'm not aware of?
Last edited by nadman10 (2013-11-06 16:48:54)Trilby wrote:grep + (cut/sed) = awk.
Very true.
Trilby wrote: awk '/\[(2|17)\]/ { print $2; }'
I wanted OP to google / RTFM this himself
The idea to use sed was correct, nadman10. You should have googled
remove "square brackets" sed
and you would have found out the answer yourself: http://www.unix.com/showthread.php?t=159143
The slightly tricky part with the square brackets is that they have special meaning, so you have to escape them i.e. precede them with '\'. -
[SOLVED] Stop "foreign" error output from shell script
Hello,
I have just migrated from TrueCrypt to VeraCrypt (without issues by the way), but I have a problem with a script that I wrote.
This script is basically a shortcut for mounting a VeraCrypt volume and opening it with Dolphin; it keeps a "question" open at the command line, which, when answered with 'y', will unmount the volume.
Here is the important part of the script:
/usr/bin/veracrypt "$VERACRYPT" "$MOUNTDIR"
/usr/bin/dolphin "$MOUNTDIR"
echo "Unmount VeraCrypt volume now [y/n]?"
read ANSWER
if [ "$ANSWER" = "y" ]
then
/usr/bin/veracrypt -d "$VERACRYPT"
fi
exit 0
As you can see, it's utterly simple. My problem now is, that some system message shows up when running the command, and it somehow hides my "question":
"/org/freedesktop/UDisks2/block_devices/dm_2d0" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem")
"/org/freedesktop/UDisks2/block_devices/dm_2d0" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem")
I thought it was veracrypt or Dolphin related, and I tried adding "2> /dev/null" at the end of those commands, but it appears that this message comes from somewhere else.
Is there a way to suppress these "foreign" messages? Why does my "question" not show up anymore at all?
Thanks,
DrTebi
Last edited by drtebi (2015-02-02 23:41:39)That worked, thanks!
I have to assume that veracrypt caused the "new interfaces" message then?
I didn't try the redirecting to stdout at first because I thought if I do that, I would not get my "question" -- but that was of course wrong, since I am not redirecting the "read" command.
Thanks for the help. -
[Solved] Vim breaks TTY output
Everything works fine in my TTY until I use vim, then all further input is unreadable gibberish until next boot. I have tested other commands and applications (pstree, canto, iptraf). None of these cause any problems. Only vim.
This is the output from ":language" in vim:
Current language:
"LC_CTYPE=en_US.UTF-8;
LC_NUMERIC=C;
LC_TIME=en_US.UTF-8;
LC_COLLATE=C;
LC_MONETARY=en_US.UTF-8;
LC_MESSAGES=en_US.UTF-8;
LC_PAPER=en_US.UTF-8;
LC_NAME=en_US.UTF-8;
LC_ADDRESS=en_US.UTF-8;
LC_TELEPHONE=en_US.UTF8;LC_MEASUREMENT=en_US.UTF-8;
LC_IDENTIFICATION=en_US.UTF-8"
locale:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE=C
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
locale -a
C
POSIX
en_US
en_US.iso88591
en_US.utf8
Last edited by the sad clown (2013-02-04 13:24:21)I don't have a complex .vimrc:
" All system-wide defaults are set in $VIMRUNTIME/archlinux.vim (usually just
" /usr/share/vim/vimfiles/archlinux.vim) and sourced by the call to :runtime
" you can find below. If you wish to change any of those settings, you should
" do it in this file (/etc/vimrc), since archlinux.vim will be overwritten
" everytime an upgrade of the vim packages is performed. It is recommended to
" make changes after sourcing archlinux.vim since it alters the value of the
" 'compatible' option.
" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages.
runtime! archlinux.vim
" If you prefer the old-style vim functionalty, add 'runtime! vimrc_example.vim'
" Or better yet, read /usr/share/vim/vim73/vimrc_example.vim or the vim manual
" and configure vim to your own liking!
filetype plugin indent on
syntax on -
[SOLVED] messed up yaourt output (could be due to pacman error)
Don't know if my yaourt issue is related to this pacman one http://bbs.archlinux.org/viewtopic.php?id=94378 but this issue is fairly new. Now when I run a
yaourt -Syu --aur
it starts fine but when fetching for AUR updates it starts showing core/extra/testing packages as they were in AUR (i.e rsync, ruby, thunderbird, samba) complaining it cannot find them in AUR (sorry for the French error messages):
yaourt -Syu --aur
Mot de passe :
:: Synchronisation des bases de données de paquets...
core est à jour;
extra est à jour;
community 364,8K 206,0K/s 00:00:02 [##################################################################################################] 100%
archlinuxfr est à jour;
==> Recherche de nouvelle version sur AUR
b43-firmware-newest: à jour
b43-fwcutter-patched: à jour
couchdb: à jour
cryptkeeper: à jour
darktable-git: (local=20100327-1 aur=20100202-1)
ddcxinfo-arch: à jour
desktopcouch-bzr: (local=129-1 aur=121-1)
elementary-icons: à jour
enigmail: à jour
giggle: à jour
giplet: à jour
git-svn-helpers: à jour(0.7-1 marqué comme "périmé")
gwibber-new: à jour
hwd: à jour
intel-gpu-tools: à jour
jdownloader: à jour
libjpeg7: à jour
libmbca: à jour
libpng12: à jour
libpthread-stubs: à jour
nxcomp: à jour
nxproxy: à jour
openvpn-easy-rsa: à jour
perl-config-simple: à jour
perl-proc-simple: à jour
perl-term-shellui: à jour
phatch: à jour
powernowd: à jour
pyexiv2: à jour
pyrenamer: à jour
pysvn: à jour
python-couchdb: à jour
python-oauth-svn: à jour
qalculate-gtk: non trouvé sur AUR
qca: non trouvé sur AUR
qgit: non trouvé sur AUR
qimageblitz: non trouvé sur AUR
qt: non trouvé sur AUR
qwit: à jour
rabbitvcs: à jour
randrproto: non trouvé sur AUR
raptor: non trouvé sur AUR
rarian: non trouvé sur AUR
rasqal: non trouvé sur AUR
recode: non trouvé sur AUR
recordproto: non trouvé sur AUR
redland: non trouvé sur AUR
remmina: à jour
renderproto: non trouvé sur AUR
ristretto: non trouvé sur AUR
rpmextract: non trouvé sur AUR
rrdtool: non trouvé sur AUR
rsync: non trouvé sur AUR
ruby: non trouvé sur AUR
samba: non trouvé sur AUR
sane: non trouvé sur AUR
saxon: non trouvé sur AUR
scons: non trouvé sur AUR
scribus: non trouvé sur AUR
scrnsaverproto: non trouvé sur AUR
sdl: non trouvé sur AUR
sdl_image: non trouvé sur AUR
setuptools: non trouvé sur AUR
sg3_utils: non trouvé sur AUR
shared-desktop-ontologies: non trouvé sur AUR
shared-mime-info: non trouvé sur AUR
sig2dot: à jour
silc-toolkit: non trouvé sur AUR
slang: non trouvé sur AUR
slim: non trouvé sur AUR
slim-themes: non trouvé sur AUR
smbclient: non trouvé sur AUR
soprano: non trouvé sur AUR
speex: non trouvé sur AUR
spidermonkey: non trouvé sur AUR
squeeze: non trouvé sur AUR
startup-notification: non trouvé sur AUR
strigi: non trouvé sur AUR
subversion: non trouvé sur AUR
sylpheed: non trouvé sur AUR
t1lib: non trouvé sur AUR
taglib: non trouvé sur AUR
talloc: non trouvé sur AUR
tcl: non trouvé sur AUR
tdb: non trouvé sur AUR
terminal: non trouvé sur AUR
texlive-bibtexextra: non trouvé sur AUR
texlive-bin: non trouvé sur AUR
texlive-core: non trouvé sur AUR
texlive-fontsextra: non trouvé sur AUR
texlive-formatsextra: non trouvé sur AUR
texlive-games: non trouvé sur AUR
texlive-genericextra: non trouvé sur AUR
texlive-htmlxml: non trouvé sur AUR
texlive-humanities: non trouvé sur AUR
texlive-latex3: non trouvé sur AUR
texlive-latexextra: non trouvé sur AUR
texlive-localmanager: à jour
texlive-music: non trouvé sur AUR
texlive-pictures: non trouvé sur AUR
texlive-plainextra: non trouvé sur AUR
texlive-pstricks: non trouvé sur AUR
texlive-publishers: non trouvé sur AUR
texlive-science: non trouvé sur AUR
thunar: non trouvé sur AUR
thunar-archive-plugin: non trouvé sur AUR
thunar-media-tags-plugin: non trouvé sur AUR
thunar-volman: non trouvé sur AUR
thunarx-python: à jour
thunderbird: non trouvé sur AUR
tk: non trouvé sur AUR
truecrypt: non trouvé sur AUR
ttf-bitstream-vera: non trouvé sur AUR
ttf-dejavu: non trouvé sur AUR
ttf-freefont: non trouvé sur AUR
ttf-ms-fonts: non trouvé sur AUR
udisks: (local=1.0.0-2 aur=1.0.0-1)
unixodbc: non trouvé sur AUR
unrar: non trouvé sur AUR
unzip: non trouvé sur AUR
vbetool: non trouvé sur AUR
videoproto: non trouvé sur AUR
vigra: non trouvé sur AUR
vim: non trouvé sur AUR
vim-auctex: à jour
vim-latexsuite: à jour
vim-minibufexpl: non trouvé sur AUR
virtualbox_bin: à jour
virtuoso: non trouvé sur AUR
vlc: non trouvé sur AUR
vte: non trouvé sur AUR
wavpack: non trouvé sur AUR
wicd: non trouvé sur AUR
wipe: non trouvé sur AUR
wireshark: non trouvé sur AUR
wv: non trouvé sur AUR
wv2: non trouvé sur AUR
wxgtk: non trouvé sur AUR
wxpython: non trouvé sur AUR
x264: non trouvé sur AUR
x2goclient: à jour
x2goclient-gtk: à jour
xarchiver: non trouvé sur AUR
xbitmaps: non trouvé sur AUR
xcb-proto: non trouvé sur AUR
xcb-util: non trouvé sur AUR
xcursor-themes: non trouvé sur AUR
xdg-utils: non trouvé sur AUR
xextproto: non trouvé sur AUR
xf86-input-evdev: non trouvé sur AUR
xf86-input-keyboard: non trouvé sur AUR
xf86-input-mouse: non trouvé sur AUR
xf86-input-synaptics: non trouvé sur AUR
xf86-video-intel: non trouvé sur AUR
xf86-video-vesa: non trouvé sur AUR
xf86dgaproto: non trouvé sur AUR
xf86driproto: non trouvé sur AUR
xf86miscproto: non trouvé sur AUR
xf86vidmodeproto: non trouvé sur AUR
xfburn: non trouvé sur AUR
xfce-utils: non trouvé sur AUR
xfce4-appfinder: non trouvé sur AUR
xfce4-artwork: non trouvé sur AUR
xfce4-battery-plugin: non trouvé sur AUR
xfce4-clipman-plugin: non trouvé sur AUR
xfce4-cpufreq-plugin: non trouvé sur AUR
xfce4-cpugraph-plugin: non trouvé sur AUR
xfce4-datetime-plugin: non trouvé sur AUR
xfce4-dev-tools: non trouvé sur AUR
xfce4-dict-plugin: non trouvé sur AUR
xfce4-diskperf-plugin: non trouvé sur AUR
xfce4-eyes-plugin: non trouvé sur AUR
xfce4-fsguard-plugin: non trouvé sur AUR
xfce4-genmon-plugin: non trouvé sur AUR
xfce4-icon-theme: non trouvé sur AUR
xfce4-mailwatch-plugin: non trouvé sur AUR
xfce4-messenger-plugin: non trouvé sur AUR
xfce4-mixer: non trouvé sur AUR
xfce4-mount-plugin: non trouvé sur AUR
xfce4-mpc-plugin: non trouvé sur AUR
xfce4-netload-plugin: non trouvé sur AUR
xfce4-notes-plugin: non trouvé sur AUR
xfce4-notifyd: non trouvé sur AUR
xfce4-panel: non trouvé sur AUR
xfce4-playercontrol-plugin: non trouvé sur AUR
xfce4-power-manager: non trouvé sur AUR
xfce4-quicklauncher-plugin: non trouvé sur AUR
xfce4-screenshooter: non trouvé sur AUR
xfce4-sensors-plugin: non trouvé sur AUR
xfce4-session: non trouvé sur AUR
xfce4-settings: non trouvé sur AUR
xfce4-smartbookmark-plugin: non trouvé sur AUR
xfce4-systemload-plugin: non trouvé sur AUR
xfce4-taskmanager: non trouvé sur AUR
xfce4-timer-plugin: non trouvé sur AUR
xfce4-verve-plugin: non trouvé sur AUR
xfce4-wavelan-plugin: non trouvé sur AUR
xfce4-weather-plugin: non trouvé sur AUR
xfce4-xfapplet-plugin: non trouvé sur AUR
xfce4-xkb-plugin: non trouvé sur AUR
xfconf: non trouvé sur AUR
xfdesktop: non trouvé sur AUR
xfprint: non trouvé sur AUR
xfwm4: non trouvé sur AUR
xfwm4-themes: non trouvé sur AUR
xine-lib: non trouvé sur AUR
xineramaproto: non trouvé sur AUR
xkeyboard-config: non trouvé sur AUR
xmlstarlet: à jour
xorg-apps: non trouvé sur AUR
xorg-docs: non trouvé sur AUR
xorg-font-utils: non trouvé sur AUR
xorg-fonts-100dpi: non trouvé sur AUR
xorg-fonts-75dpi: non trouvé sur AUR
xorg-fonts-alias: non trouvé sur AUR
xorg-fonts-encodings: non trouvé sur AUR
xorg-fonts-misc: non trouvé sur AUR
xorg-res-utils: non trouvé sur AUR
xorg-server: non trouvé sur AUR
xorg-server-utils: non trouvé sur AUR
xorg-twm: non trouvé sur AUR
xorg-utils: non trouvé sur AUR
xorg-xauth: non trouvé sur AUR
xorg-xinit: non trouvé sur AUR
xorg-xkb-utils: non trouvé sur AUR
xproto: non trouvé sur AUR
xscreensaver-arch-logo: à jour
xterm: non trouvé sur AUR
xulrunner: non trouvé sur AUR
xvidcore: non trouvé sur AUR
zip: non trouvé sur AUR
zvbi: non trouvé sur AUR
Last edited by alphazo (2010-04-02 18:22:23)It seems your sync database got messed up somehow, especially based on your other post with issues doing a pacman -Syu. I suspect the advice to run pacman -Syy (or yaourt -Syy) should fix this problem as well.
-
[solved] errors in systemctl output
$ sudo systemctl --all --no-pager | grep error
auditd.service error inactive dead auditd.service
syslog.target error inactive dead syslog.target
$ pkgfile auditd.service
community/audit
$ pkgfile syslog.target
$
$ cat /usr/lib/systemd/system/systemd-update-utmp.service
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Update UTMP about System Reboot/Shutdown
Documentation=man:systemd-update-utmp.service(8) man:utmp(5)
DefaultDependencies=no
RequiresMountsFor=/var/log/wtmp
Conflicts=shutdown.target
After=systemd-readahead-collect.service systemd-readahead-replay.service systemd-remount-fs.service systemd-tmpfiles-setup.service auditd.service
Before=sysinit.target shutdown.target
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/lib/systemd/systemd-update-utmp reboot
ExecStop=/usr/lib/systemd/systemd-update-utmp shutdown
There are some services that have
After=syslog.target
dbus.service, nscd.service, lm_sensors.service, svnserve.service.
Should I do anything about these errors? syslog.target doesn't seem to exist at all ...
Last edited by karol (2013-07-29 18:24:36)I get
$ systemctl --all --no-pager | grep -i error
auditd.service error inactive dead auditd.service
plymouth-quit-wait.service error inactive dead plymouth-quit-wait.service
plymouth-start.service error inactive dead plymouth-start.service
syslog.target error inactive dead syslog.target
If you boot to a display manager, I think you don't get the error for that one because enabling the relevant service sets up a symbolic link. For example:
lrwxrwxrwx 1 root root 31 Aws 26 2012 /etc/systemd/system/display-manager.service -> /etc/systemd/system/kdm.service
I remember reading complaints that systemd hard-coded dependencies on distro-specific stuff and that it shouldn't. (This was about the plymouth failures.) I tend to agree it is badly behaved in this respect. (As I've said before, I find the logging the biggest downside with systemd. It is the only thing which really bothers me and this, like journal, is part of that.) However, I believe it is harmless.
Does anybody know what audit is good for or what the syslog.target is important for? I actually use syslog-ng and I still get this error.
I take it that "masking" just involves the standard symlinking to /dev/null? I should probably do that for plymouth - the lack of a splash screen should not be highlighted as a boot error! I'd like to know more about the others, though...
Maybe you are looking for
-
How to execute link without showing it on browser
Hi, In my site iam implementing sms functionality through 3rd party tool. In that, they gave me an url which will send the sms through their website. For that, i have to execute the url. Is it possible to execute the url without showing on the browse
-
I tried to delete start up disk files and messed up, galaxy screen only comes after I log in, no dock, won't take start up disk, can't get to utilities to try and fix it
-
Hi All, We have specific requirement, where my cleint wants to create a campaign, like email or mailer campaign in CRM, But as per System Landscape of our project Email and Letter composition is sent through system called Streamserve, where stream s
-
Hi, I would like to use automatic code generation UML -> Java. I was planning to use XMI import in NWDS, but as of 7.0.11 this option is deprecated. Does anyone know the reasons behind this decision? Moreover, I would really appreciate if anyone coul
-
Drill Down report using Webdynpro
Hi Guys, Is it possible to develope a drill down report in Webdynpro? If yes, can somobody direct me to any tutorial for creating Drill Down Webdynpro Report. I need to convert an ABAP drill down report to Webdynpro Drill Drown. Thanks, mini