[SOLVED][systemd 210] systemd-backlight@.service gets loaded and fails

Hello,
I just updated to 210 and rebooted as soon as possible as advised. The first thing I noticed is the red [Failed] message during startup. After looking at systemctl I noticed that systemd-backlight@backlight:eeepc-wmi.service fails. There are 3 things wrong with this 1) I don't have a backlight this is on a desktop 2) It's not an eeePC 3) I never had any failed services before the update. I tried to disable this service, but the service still tries to start and fails on every boot. I read about systemd-backlight here: http://www.freedesktop.org/software/sys … rvice.html but it doesn't really help much to explain why it tries to load this service in the firstplace. I have not tried masking it, but this would not fix the underlying problem anyway.
The systemctl status doesn't provide any usful information.
systemd-backlight@backlight:eeepc-wmi.service - Load/Save Screen Backlight Brightness of backlight:eeepc/wmi
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: failed (Result: exit-code) since Di 2014-03-04 18:51:41 CET; 20min ago
Docs: man:[email protected](8)
Process: 185 ExecStart=/usr/lib/systemd/systemd-backlight load %I (code=exited, status=1/FAILURE)
Main PID: 185 (code=exited, status=1/FAILURE)
Mär 04 18:51:41 archbox systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:eeepc/wmi...
Mär 04 18:51:41 archbox systemd[1]: systemd-backlight@backlight:eeepc-wmi.service: main process exited, code=exited, status=1/FAILURE
Mär 04 18:51:41 archbox systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:eeepc/wmi.
Mär 04 18:51:41 archbox systemd[1]: Unit systemd-backlight@backlight:eeepc-wmi.service entered failed state.
Regards,
blackout23
Last edited by blackout23 (2014-03-07 01:24:29)

You're not alone. I have the same problem, though Google really doesn't show anyone else who does. What's your hardware situation look like?
Here's my lcpci:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:08.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:10.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
03:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 680] (rev a1)
03:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
05:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
06:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
07:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01)
08:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
09:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
0a:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
Last edited by dhaines (2014-03-05 01:37:50)

Similar Messages

[Solved]can't get systemd to work, syslog.service not loaded

So, i've been trying to use systemd today, after "Create systemd configuration files." step and reboot, i always got this:
Any Help would be appreciated..
Last edited by veroke12 (2012-08-25 07:31:06)

eldragon wrote:remove quiet from your kernel boot parameters. post some more useful stuff like the dmesg (obtained from the recovery console)
that did the trick, but can't login (i use startx)..
and get an error mounting:
mnt-windows.mount - /mnt/windows
Loaded: loaded (/etc/fstab)
Active: failed (Result: exit-code) since Sat, 25 Aug 2012 13:03:57 +0700; 3min 26s ago
Where: /mnt/windows
What: /dev/sdb
Process: 367 ExecMount=/bin/mount /dev/sdb /mnt/windows -t ntfs-3g -o gid=users,fmask=113,dmask=002 (code=exited, status=12)
CGroup: name=systemd:/system/mnt-windows.mount
Aug 25 13:03:57 myhost mount[367]: NTFS signature is missing.
Aug 25 13:03:57 myhost mount[367]: Failed to mount '/dev/sdb': Invalid argument
Aug 25 13:03:57 myhost mount[367]: The device '/dev/sdb' doesn't seem to ha...S.
Aug 25 13:03:57 myhost mount[367]: Maybe the wrong device is used? Or the w... a
Aug 25 13:03:57 myhost mount[367]: partition (e.g. /dev/sda, not /dev/sda1)...d?
dmesg:
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e1d5602b-de83-46e0-8ed8-4366a319b49b ro init=/bin/systemd
[ 0.709226] systemd-udevd[41]: starting version 188
[ 2.936891] systemd[1]: systemd 188 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
[ 3.170230] systemd[1]: Inserted module 'autofs4'
[ 3.199718] systemd[1]: Set hostname to <myhost>.
[ 4.267502] systemd[1]: [/usr/lib/systemd/system/rc-local.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
[ 4.445331] systemd[1]: [/usr/lib/systemd/system/rc-local-shutdown.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
[ 4.503987] systemd[1]: Cannot add dependency job for unit dkms.service, ignoring: Unit dkms.service failed to load: No such file or directory. See system logs and 'systemctl status dkms.service' for details.
[ 4.504023] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 4.504291] systemd[1]: Socket service syslog.service not loaded, refusing.
[ 5.060568] systemd-udevd[125]: starting version 188
[ 5.760783] systemd-journald[132]: Fixed max_use=145.0M max_size=18.1M min_size=64.0K keep_free=72.5M
[ 5.760833] systemd-journald[132]: Reserving 33009 entries in hash table.
[ 5.761588] systemd-journald[132]: Vacuuming...
[ 61.730597] systemd[1]: Job systemd-tmpfiles-clean.timer/start failed with result 'dependency'.
[ 61.730612] systemd[1]: Job dbus.socket/start failed with result 'dependency'.
[ 61.730719] systemd[1]: Unit mnt-windows.mount entered failed state.
[ 61.734921] systemd-journald[132]: Received SIGTERM
[ 61.810451] systemd[1]: Startup finished in 3s 223ms 841us (kernel) + 58s 586ms 503us (userspace) = 1min 1s 810ms 344us.
[ 61.839330] systemd-journald[379]: Fixed max_use=145.0M max_size=18.1M min_size=64.0K keep_free=72.5M
[ 61.839678] systemd-journald[379]: Vacuuming...
[ 61.893807] systemd-journald[379]: Received SIGUSR1
Last edited by veroke12 (2012-08-25 06:31:18)

Can't start messaging server - get "Load Environment Failed" in the administration server

The messaging server can't restart, and when I use the
admininstration server to verify setting I get the following message:
<P>
load environment failed
<P>
The file /etc/netscape.mail.conf is probably corrupted or missing.
Try to regenerate it out of a backup.

We also use a boot.properties in ${domain.home}, which may only be for Admin server, but worth checking anyway. Also, I often receive the boot.properties message you're seeing when there's other problems upstream, and I've found the message to be quite misleading at times. For example, if I have a problem with an LDAPAuthenticator or any other security mechanism I'll often see the boot.properties message eventhough the problem has nothing to do with that file.

When class gets loaded and unloaded

Hi,
I want to know when class gets loaded in to the memory, is it when the class is called for the first time??. Also how much time the loaded class will stay in the memory. when the class gets unloaded ??
chetana_vir

hahaha class gets loaded or class object?Class. Objects don't get loaded.
@OP: It certainly gets loaded no later than when the class is first referenced in your code. I may permissible to load it earlier. I don't know the details. Look [url http://java.sun.com/docs/books/jls/second_edition/html/execution.doc.html#44459]here or [url http://java.sun.com/docs/books/vmspec/2nd-edition/html/Concepts.doc.html#19175]here or [url http://java.sun.com/docs/books/vmspec/2nd-edition/html/ConstantPool.doc.html]here
Unloading of a class can only happen if there are no more references to the class or to any instances of it, and if it was loaded by a classloader other than the primordial or the system classloader. It will be unloaded when the classloader that loaded it is unloaded. I forget the details of when this happens, but there can't be any references to any classes loaded by that loader (or to any instances of those classes).
[url http://java.sun.com/docs/books/vmspec/2nd-edition/html/Concepts.doc.html#32202]here for unloading info.
[url http://java.sun.com/developer/JDCTechTips/2003/tt0819.html#2]Unloading and Reloading Classes
(which came from http://www.google.com/search?q=java+tech+tip+class+loader&sourceid=opera&num=0&ie=utf-8&oe=utf-8)
¶

My personally owned Acrobat 11 pro gets loaded and unloaded Along with My 49.95 Creative Cloud.

There must be a way to keep these apart. After I got my subscription to Creative cloud for $50.00 A Month I never USE MY OWN SOFTWARE ANYMORE. When one loads, they both load and both don't work at all.They both end up fully loaded so if you think uninstall one they both come off at the same time. Normally I know some place to start, tonight I'm baffled..It's a 50 TB Desktop machine formatting it is NOT an option,
Regards,
John C. Weum
Anchorage, Alaska

With the creative manager, you do not have to choose to install acrobat again if it already is on your system. However if it find your version outdated, it can offer you to update it, but you don't have to update it.
Acrobat itself will offer updates separately from the manager. So you can update from that if you choose to.
Acrobat will not uninstall from the manager unless you choose to.
What has be baffled is it stop working after the manager is installed. This is a bit beyond my expertise so hopefully someone else can help with that.
Have you asked in the acrobat forum if anyone else has had a similar experience? Acrobat Installation & Update Issues

The BPM Workspace is loading and failing to initialize the directory.xml

Hi BPM Specialists,
I installed BPM along with SOA suit in Windows XP box. Now I am getting failing to initialize directory.xml error and the workspace is not getting loaded.I am not able to locate a directory.xml file in my installed directory. Please let me know what needs to be done.Thanks a lot in adavance.
Initializing PAPI services...
<May 3, 2011 1:10:23 PM IST> <Error> <oracle.bpm.common> <BEA-000000> <directory configuration runtime fails to initilize with resource: ..\config\directory.xml
java.lang.IllegalStateException: directory configuration runtime fails to initilize with resource: ..\config\directory.xml
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:335)
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
at fuego.papi.ProcessService.create(ProcessService.java:335)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.initPAPI(ADFWorkspaceEnvironment.java:66)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.initialize(WorkspaceEnvironment.java:113)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.<init>(WorkspaceEnvironment.java:85)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.<init>(ADFWorkspaceEnvironment.java:37)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:51)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
java.lang.IllegalStateException: directory configuration runtime fails to initilize with resource: ..\config\directory.xml
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:335)
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
at fuego.papi.ProcessService.create(ProcessService.java:335)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.initPAPI(ADFWorkspaceEnvironment.java:66)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.initialize(WorkspaceEnvironment.java:113)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.<init>(WorkspaceEnvironment.java:85)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.<init>(ADFWorkspaceEnvironment.java:37)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:51)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
java.lang.reflect.InvocationTargetException
<May 3, 2011 1:10:23 PM IST> <Error> <oracle.bpm.common> <BEA-000000> <WorkSpace failed on Startup.>
<May 3, 2011 1:10:23 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener oracle.bpm.workspace.adf.ADFWorkspaceContextListener failed: oracle.bpm.lang.exception.ProgramException: WorkSpaceWorkSpace failed on Startup..
oracle.bpm.lang.exception.ProgramException: WorkSpaceWorkSpace failed on Startup.
at oracle.bpm.lang.exception.ProgramException.wrap(ProgramException.java:54)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:55)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
Truncated. see log file for complete stacktrace
Caused By: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
Truncated. see log file for complete stacktrace
Caused By: java.lang.RuntimeException: Critical Error.
Detail:
directory configuration runtime fails to initilize with resource: ..\config\directory.xml

Thanks a lot for you reply.
I have installed OBPM 11g along with SOA suit.So whenever I am trying to restart the WL server, the log is showing the error where it is not able to initialize the directory.xml.
Could you please let me know what else can be done?

Why do i pay more and more money yet the service gets worse and worse -- all the way around.

First of all, someone need to repair this site, because now, for the last thee times I've tried to log in, I have gotten a message that my password and user name aren't matching or some such nonesense. Mind you, I have it written down, and log in once a month to ipay the bill.
No more. They'll get it in the mail.
This is on verizon's end. At first I had no problems but for the life of me, I cannot log into my main account, which I only do to pay the bill.
THAT is going to stop.
Next, I want everyone to realize here that my cellphone is still on hold, and it's been a ONE HOUR, AND TEN MINUTES AND I ENDED THE CALL. This is inexcuseable. Unacceptable. I won't pay more money for that crap, quite frankly.
I'm sure now I've been routed to a black hole, because when I called in, I was -- AND THIS IS OUTRAGEOUS -- routed five tims, five times, five times back to the beginning cue. It is outrageous. There are customer service issues and I'll bet there are even laws against this tyupe of fraud. I call, I expect to punch in the correct info, which I do, then get routed to the proper place. Instead five times I got booted back to the cue.
Hey, if it were so easy as they claim this 'IN HOUSE AGENT" AND THIS LIVE CHAT -- WHICH I WAITED 15 MINUTES FOR SOMEONE NAMED ALEX WHO CUT ME OFF, IT MIGHT BE A WAY TO DO. BUT NOT WHEN THE WAIT IS JUST AS LONG, THE PERSON ON THE END IS JUST AS RUDE, THE SERVICE STINKS SO BAD, AND YOU BET I WANT TO TALK TO SOMEONE,...
MY VOD DOESN'T WORK.
WITH THE BILL I PAY FOR FIOS TV AND INTERNET, IT BETTER WORK. I KNOW THEY ARE ENGAGING IN THROTTLING -- THAT'S BAD ENOUGH. BUT VOD NOT WORKING? BAD, BUT NOT REACHING SOMMEONE ON THE PHONE? WORSE.
I FAIL TO SEE WHY ANYONE SHOUDL CONTINUE TO PAY MORE AND MORE MONEY AND GET THIS CRAP SERVICE, AND THAT'S WHAT IT IS LET'S NOT HEAR FRON ANY SYCOPHANTS.
BUT I SEE THEY TAKE MY MONEY EACH MONEY. THEY SURE TO TAKE IT.
WHAT GIVES WITHT HE WEBSITE AND ME CONSTANTLY HAVING TO CHANGE MY PASSWORD? DOES ANYONE KNOW WHAT IT THE ISSUE WITH THAT? BECAUSE WHEN YOU ARE AGGRAVATED, AND YOU SAY OK, LET'S SEE IF THIS WEBSITE HELP IS ANY GOOD -- HYOU WANT TO BLOODY WELL LOG IN WITHOUT HAVING TO CREATE ANOTHER PASSWORD.
THEN YOU WANT TO GET SONEONE HWO HELPS, NOT AN **bleep**, OBVIOUSL,Y VERIZON ISN'T [PAYING MUCH YOU CAN'T GET ANYONE TO WORK NIGHTS.
I WILL CALL BILLING TOMORROW. i WANT MY MONEY BACK FOR THIS MONTH'S PAYMENT.
THIS IS THE WORST SERVICE I HAVE EVER EXPERIENCED. AT LEAST BRIGHTHOSUE IS HERE I TAMPA.

What type of phone do you have? Is it a newer, 4G phone? Those phones are NOT available with one of the pre-paid plans.
Do you have a Family plan, or only an individual plan? Family plans are not an option on pre-paid plans. You would have to manage each line separately, keeping a pool of money available in each plan to be paid when the plan renews each month.
Several people have posted on these forums when they have forgotten to "fund" their pre-paid account and have lost their number and have to begin service again from scratch. There are also those on these forums who have forgotten the funds in their pre-paid account "expire" after a period of time and money in your account can be lost in this manner. Yes, there are upsides, but there ARE downsides to having a pre-paid account. You would have to balance the pros and cons to see which would be the best fit for you.
Of course, pre-paid is an option, one which everyone must make for themselves. Not everyone will be happy with a pre-paid, but if price is the deciding factor in your choice, it may be the correct choice in your case.

Get Loading and HTC screen when I hit home button!

I now get the whit HTC logo and then it goes to a box with loading before my home screen activates. This is irritating and takes a while to load. The box with loading seemed to happen after a new app was installed. The white HTC screen started with the new 2.2. Any suggestions.

AZSALUKI wrote:
settings-> sd & sphone storage-> factory data reset......IT WILL ERASE YOU STUFF...just a warning.
That is why it is a good idea to back up your stuff BEFORE performing a reset!

Wierd mix issue....some instruments get loader and softer for no reason....

OK...I have a strange problem...in a song, I have a shaker from an Apple loop....it is muted at some points in the song and then comies in out out throughout the song...the strange part is that it changes volumes and tonality DRASTICALLY....it comes in fine, then gets drastically louder and brighter...then at a different part of the song gets very soft and dull, then goes back to the normal level....This is basically an 8 bar loop for 4 minutes...so its all just copied data...and no automation anywhere.....Any ideas? The BTD is a 24bit/96k wave file with no dither....

maybe you've accidentally got your apple loop following chord changes.. I believe there's a setting for that in the global chord track, but I never use this part of logic because it's a bit on the gimmicky side IMO. anyway it would suit the symptoms you are describing, if throughout your song the shaker is being suddenly repitched in real time at various times in your song, that would easily explain why sometimes it is drastically loud and bright, other times soft and dark.. transposing a shaker would have exactly those characteristics.

SQL Azure sync service-- absurdly slow and fails after a few days

Hello. We have been trying to use Azure Data Sync to replicate an on-premise MSSQL database to an SQL Azure database for read-only access by a customer. This was working for a while, but stopped syncing after a couple months(12hr auto-sync schedule) with
no errors in the log. I had to re-create the sync group, but now it takes even longer than originally to try to sync, and never actually completes, as it gets interrupted by bi-weekly server restarts... It used to take a few hours to sync the new data in our
database(which is appended to daily)-- but this time it fails after 4+ days... It was unacceptably slow initially(IMO), but now it's clearly unusable. The original initialization of the data when I first set it up was less than 2 days of syncing.
It seems there is a throttle on the Azure sync service. Is this true? Would it be best to clear the SQL Azure database now and re-sync? Is there a way to pre-load the SQL Azure database with MSSQL on-premise data via a SQL backup file or something?
Please advise. Thank you.

when you re-created the sync group, does the member databases/hub database have pre-existing data?
when synching a sync group for the first time, make sure databases don't contain the same set of data, otherwise, you will run into conflicts which will completely slow down your sync...
I deleted the initial sync group because it wasn't syncing(auto or on-demand), nor creating a log entry with an error indicating why.
So, I simply deleted the sync group and re-created it with the same exact databases and settings. I did not delete all data in the SQL Azure database-- I was under the assumption that the sync service, with the tracking tables were smart enough to not get
confused with pre-existing data, but apparently that's not how this works?
I obviously can't delete the data in the source database(MSSQL on-premise), but I could delete the tables in the SQL Azure database if that's supposed to fix the problem-- then we'll just have to wait multiple days for it to be completely re-initialized,
hopefully without error... Is there a way to seed the data in some way to prevent this extremely log first sync?
Thank you for your help.

The custm error page is not getting loaded in TomCat 5.0

Hi all,
I am working on a JSF web application deployed in Tomcat 5.0.I was trying to redirect 404 and 500 error pages to custom error pages.But the error pages are not getting loaded and i am getting normal Tocat 404 status page.
I am giving the web.xml entry for the error page defenition.
<error-page>
          <error-code>404</error-code>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
     <error-page>
          <error-code>500</error-code>
          <location>/faces/SessionExpirepage.jsp</location>
     </error-page>
     <error-page>
          <exception-type>java.lang.Throwable</exception-type>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
Please help me out to solve this problem.Its urgent.I will be greatful for any kind of help.
Note: The same application working fine,ie,the error page is getting loaded while deploying WAS 6.0.
Jeevan Edakkunnath.

That's a specification version. I was asking for the implementation and version. Is it the Sun reference implementation (Sun JSF RI)? If so, which build?
It works flawlessly here on the latest build of Sun JSF RI 1.1, the 1.1_02. You can get the latest build at [http://javaserverfaces.dev.java.net]. I was using Tomcat 6.0.14 by the way, it might make difference.
Does it work if you use plain vanilla JSP files and do not pass the request through the FacesServlet? I recall some bugs related to it, but I am not sure anymore if it is related to the JSF implementation or application server used.

Some images are not getting loaded

I am online tutor. And today i got a problem . Images are not getting loaded and also many things are not getting loaded. But when i use internet explorer i don't have that problem . But i don wanna u internet explrer. Can any one help me. And the site with which i am facing problem is tutor.tutorvista.net

Please try the instructions in this article: http://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show
Hope this helps. :)

Page stuck while load and leads to stuck thread

Hi
I am facing an issue from a long time.
When i run the page of my application, when it opens for first time it get stuck and get loading and take very much time and after that it leads to stuck thread issue. All the component of my page opens but there is a table which gets value from OIM APIs also loads for the fiirst time. As in coding i have done it will pass null value to the table and wont fetch data for the first time. it will only fetch when value will be passed in a text box and submit was hit.
So my page gets hanged or loading in the table section everytime when it loads. for that i have to login in weblogic server, run the workmanager, forcefully shut down the server instance and run the page again. But sometime that doesnt work too.
Please help its a bug trouble for me and creating a huge problem.
Thanks
Sudeep

I'm not sure I understand your issue - but if you want to delay the fetching of information into the table until you actually have a value to pass to it see:
http://blogs.oracle.com/shay/2010/08/delay_method_execution_when_us.html

CR4VS2010 Load Report failed - COMException (0x800001f5): The Report App...

Hello,
My company recently decided to start using the 64 bit CR VS2010. Several machines have installed it and are working correctly, but others get Load Report failed - COMException (0x800001f5): The Report Application Server failed error when trying to render a crystal report to a new application window. This happens when running the app through VS2010 or IIS.
Another issue, is that once CR4VS2010 is installed, the ability to check-out .rpt files through TFS no longer works. CR4VS2010 will open the .rpt, but manual check-out is not allowed for some reason.
Machines are running Vista 64 bit Ultimate, VS2010, Crystal XI R2 SP4, and TFS.
So far I have tried re-installing VS2010 and CR4VS2010, but still get the same issues.
All help is greatly appreciated.
Thank you.

Hello,
Please one question per post, makes it a lot easier to follow. Post your TFS question in a new post.
Use Process Monitor and compare logs between working and non-working PC's. Typically either missing dependencies or permission issues. Look for Access Denied errors.
Thank you
Don

ATV will see homeshare but will not load and play video.

ATV2 will see and connect to my homeshare library but when I try to watch anything (Movie, TV Show, etc) it shows the loading animation for about 5 minutes and then says that an error has occurred. It was all working two days ago but stopped working when we had a power outage. I have tried resetting the computer, the ATV2, and the router. I have also tried restoring the ATV2. Nothing works. Again, it will allow me to select a video to watch but will try to load and fail.
ATV2- up to date.
iTunes- up to date.
iMac- up to date.
No Firewall.
I am not sure what else to do here guys... I have tried literally EVERYTHING that I have found in these support topics and everything that I could think of to get this to work again. I also have an ATV3 in the other room and it is working fine. I know it is NOT a bandwidth issue because everything was working just fine until the power outage 2 days ago which lasted only about 2 seconds..
Any suggestions?
About ready to drop-kick this thing and go get a new ATV3 from the Apple Store...
HELP?!
Mahalo (Thanks) for any help you can give!
Steve.

I am sorry to see that no one replied to this issue. has it been resolved? Unfortunately not for me. I am having the same problem. Interestingly enough I can play music files from my homesharing iTunes library but I cannot play any video content - including music video.
APT2 Loads content (take at least 3 min.)
Indicates that the movie is there
I click play or select
The gear starts spinning
5 minutes later I get the error message: An error occurred loading this content. Try again later.
I have not changed anything in the house regarding computers or routers - other than updating Apple TV 2

[SOLVED][systemd 210] systemd-backlight@.service gets loaded and fails

Similar Messages

Maybe you are looking for