[SOLVED] The 773 vga mode?

Arch supports FrameBuffer mode and a 1024 x 768 display for my video card (Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller). However whenever I try to compile the kernel from source (basically to disable modules I do not need and also to change the boot logo) I end up getting either a blank screen while boot-up or a message saying the 773 video resolution is not supported.
Specifically I get a resolution not supported error (expectedly I guess) when I compile the kernel without making any changes in menuconfig. However even then all the difference there is is in the console mode; once I start xorg and gnome I get a full 1280 X 800 without any problems.
When I enable any (or all) of the following under frame-buffer devices I get a blank screen. I have tried linking them to the kernel permanently as well as trying to enable them as modules.
VGA 16-color graphics support (NEW)
Userspace VESA VGA graphics support (NEW)
Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL) (NEW)
My notebook probably boots since after a minute when I enter a my username and password and type reboot and press enter it does reboot. I realize that even the RAMFS will reboot my computer if I type reboot but the HDD activity LED makes it pretty clear that the notebook does boot.
Any help is appreciated.
PS. An lsmod on the Arch Linux kernel shows me something like intel_agp. I think that this might be missing the in kernels I have compiled. I will have to double check though.
Last edited by theDigitalAngel (2009-04-18 23:11:22)

Woah, you shouldn't even be using vga=, that's for vesa. You should use intelfb. I'd recommend
Devices Drivers ---> Graphics support ---> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)
[Y] Intel 830M, 845G, 8252GM, 855M, 865G (i915 driver) --->
i915 driver
[Y] Enable modessetting on intel by default
Device Drivers ---> Graphics support ---> Console display driver support
[Y] Framebuffer Console support
In /boot/grub/menu.lst, you'll want on the kernel line
video=intelfb:1280x800-24@60
Don't use vga. That's for vesa.

Similar Messages

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

How can I solve the problem of panic.ips in my iphone 5?

Hi to all. I'm new on this kind of communities. I've updated my Iphone 5 to IOS 7.1.1, my problem is that since a did this updated mi iphone began to restart automatically no matter wich aplication im working.
I've revised the use diagnostice and it shows a text about panic.ips. Somebody can help me to know if this is a hardware problem or software problem and if it can be solve?
Thank you.

Hi Odragde,
Thanks for visiting Apple Support Communities.
If your iPhone is restarting unexpectedly after updating the iOS software, start with step 5 in this troubleshooting guide:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

How to get my macbook pro out of VGA mode

I plugged my new Macbook Pro into a VGA adapter to do a slideshow on a projector screen, and after i was finnished, my mac is still in VGA mode on the lcd screen - is a awkward view mode. Does anyone know how to revert back to a normal viewing mode? Even after restarting the macbook, it remains in the mode for being connected to a vga cord. thank you.

Safe Mode uses a simple display mode and bypasses the stored settings. It can be used to get out of situations where you set the resolution or configuration wrong.
Hold down Shift as you start up.
It will run a pass of "Repair Disk", which takes several minutes.
Then it will come up with minimal extensions loaded and default display settings.
Provide your User_id and password and log in.
Change the displays prefs to something boring.
Be certain to close the pref pane and Save changes.
Restart.

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

Tips For Solving the Mac OS X Lion Slowness (Lots of Beach Balls)

Hi Folks,
Just a quick list of tips for this issue that some of Mac OS X Lion users face.
The main symptom is that we get the Beach Ball on almost any task, it takes 4, maybe five times more time to do what we need to do. So depending on the schedule, it can drive us crazy. I was facing that, and started to think that Lion was a Windows Vista relative.
Please remind that the tips below involve backing up and restoring your system. If you are not careful, you may lose everything. You are responsible for your acts. Be cautious!
How I solved my issue:
1) Checked for Disk Permissions and the Disk itself:
- Applications / Utilities / Disk Utility:
- Click on your disk, and then VERIFY DISK. If everything is OK, move on. If it is not, REPAIR DISK.
- Now click on VERIFY DISK PERMISSIONS. If everthing is OK, move. If not, Repair.
This step 1 is to make sure that your slowness is due to something related to the OS itself and not to permissions/disk.
If this solves the slowness, then you are OK. Now further steps are necessary. In my case, this just helped a little bit. The beach-balling reduced by 20% only. Still too slow.
2) Do a full backup of your system.
I used Time Machine. Make sure you have all of your applications closed. So the backup will be full. If you fail to do a good backup, you will lose everything! Make sure you do a good one. Maybe do it twice on 2 different disks! Now you have been warned.
3) Do a Full Restore of your entire system.
Now, get that Install CD that came with your Mac,
- Put it on your drive, shut down your computer.
- While holding the C key, press the start button of your Mac. It will boot using the Install CD that came with your Mac.
To recover your entire system:
Connect your Time Machine backup disk to your computer. If you’re restoring your system because of a problem with your startup disk, make sure the disk has been repaired or replaced.
Insert your Mac OS X Install disk, and double-click the Install Mac OS X icon.
In the Installer, choose Utilities > Restore System from Backup.
In the Restore Your System dialog, click Continue.
Select your Time Machine backup volume.
Select the Time Machine backup you want to restore.
Follow the onscreen instructions.
4) Remove the CD, and boot.
When I did that, the system came back very fast and responsive. No more beach balls (only on the really-intensive tasks), and everything was back to normal.
5) So, what was it anyways?
Before doing this Backup/Restore, I was getting lots of DISK I/O ERRORS, specially during boot time (you can check that by shutting down your mac, powering it back on and imediatelly pressing Command-V - Verbose Mode).
Sure, the first thing in mind was that I had a faulty hard drive, but I checked it several times for errors (via Disk Utility), and nothing showed up.
So I decided to do a full backup/restore of the system. And it solved it, at least for me.
My config:
MacBook Pro (2009 edition) - 5 GB RAM - 640 GB HD - Mac OS X 10.7
Regards.

Also my mac will not complete my 5 software updates, no idea which software, but it said it could not do it. Also backing up with time machine had failed twice today. Thanks

RDL Reports are not working after installing SQL Server 2012 Service Pack 2 in the SharePoint integration Mode

I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
inside SharePoint and Document Libraries.
But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message.
The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.

Hi Hedayat-Abedijoo,
According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
According to my search, there may be two reasons for the problem:
This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
in IIS instead of through SharePoint (using the approved method).
This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
If you have any questions, please feel free to let me know.
Thanks,
Wendy Fu

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report:          8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker.

MacBook Air is getting hot when external monitor is connected - restart solves the problem

I have a two weeks old Mac Book Air 11" (128GB / 4GB / i5). Sometimes when I connect it to my external monitor, the FAN is getting loud and the MacBook becomes very warm on the surface near the "F3 button". The activity monitor says CPU is at 0-1% and there's no process that causes any CPU load (I switched to "show all processes" of course). Nevertheless something makes the Mac becoming hot. A simple restart while the external monitor is connected solves the issue completely, temperature and fan speed are instantly decreasing. Is this a issue related to the graphics driver? For me it seems the behavior is caused by the graphics processor rather than by the i5 CPU as activity monitor does not show any process causing high CPU load.
Known issue?
Thanks!

I was runnig into the same problem. Plugging in to the apple 23" display at work worked well, but when I plugged in my Dell 23" at home the fan started being noisy...
ALTERNATIVE SOLUTION: it seems to me that putting the air to into SLEEP MODE and back solves it as well!!
I will confirm later on.

Table toolbar disappeared in the screen reader mode in Oracle ADF

I have a validation message box(pop up) opening from a button action from page fragment(jsff) page and in screen reader mode the message box shows up as default on the same page instead of pop up message box and
and below the message box there is this message information "Press escape to exit this popup." and when I click ESC key it then shows up the main default page with the table toolbar disappeared. In the screen reader mode the ADF framework is taking total control over the showing message box as default on the same page instead of pop up message box and showing below message " Press escape to exit this popup.". My question is how to edit this page and is there any way to get rid of below message information. I also want to know does ADF provide any API in screen reader mode to control the table toolbar disappearing. I really appreciate any help or advice or any work around to solve this issue.
Eagerly waiting for the response.
Thanks in advance

I'm using JDeveloper 11g (11.1.1.4.0) which has come with accessibility feature(screen reader mode). I have no idea of which version of screen reader that Jdeveloper IDE has.
I use IE 7 browser and it is mandatory I have to use IE7 browser for this project. All I need help is how to get control of web page( jspff) when we use in accessibility mode. we configure like this
in trinidad-config.xml file.
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>myskin</skin-family>
<accessibility-mode>#{accessibility.accessibilityMode}</accessibility-mode>
</trinidad-config>
for example like in this jspff file :
<af:panelStretchLayout
id="panelStretchLayout1" topHeight="#{accessibility.accessibilityMode == 'screenReader' ? '137px' : 'auto'}"
startWidth="auto">
<af:panelCollection binding="#{backingBeanScope.backing_pageFragements_.panelCollection2}"
id="panelCollection2">
<f:facet name="menus"/>
<f:facet name="toolbar">
<af:toolbar binding="#{backingBeanScope.backing_pageFragements_.toolbar1}"
id="toolbar1"
shortDesc="Toolbar">
I'm using like this, let me know I'm doing correct or is there any other way we can do to avoid toolbar to disappear.
I appreciate your help.

Whats the difference VGA and CIF

hi can anyone tell me what VGA and CIF mean what are the differences and which is better?

The term VGA [Video Graphics Array]is often used to refer to a resolution of 640×480, regardless of the hardware that produces the picture. It may also refer to the 15-pin D-subminiature VGA connector which is still widely used to carry analog video signals of all resolutions.
The VGA specifications are as follows:
256 KiB Video RAM
16-color and 256-color modes
262144-value color palette (six bits each for red, green, and blue)
Selectable 25 MHz or 28 MHz master clock
Maximum of 720 horizontal pixels
Maximum of 480 lines
Refresh rates at up to 70 Hz
Planar mode: up to 16 colors (4 bit planes)
Packed-pixel mode: 256 colors (Mode 13h)
Hardware smooth scrolling support
Some "Raster Ops" support
Barrel shifter
Split screen support
Soft fonts
The VGA supports both All Points Addressable graphics modes, and alphanumeric text modes. Standard graphics modes are
640×480 in 16 colors
640×350 in 16 colors
320×200 in 16 colors
320×200 in 256 colors (Mode 13h)
As well as the standard modes, VGA can be configured to emulate many of the modes of its predecessors (EGA, CGA, and MDA).
VGA is better.
The Quarter Video Graphics Array (also known as Quarter VGA or QVGA) is a popular term for a computer display with 320 × 240 resolution. QVGA displays are most often seen in mobile phones, PDAs and some handheld game consoles. Most often the displays are in a “portrait” alignment (as opposed to “landscape”) and are referred to as 240 × 320 as the displays are taller than they are wide.
The name is derived from the fact that it offers 1/4 of the 640 × 480 maximum resolution of the original IBM VGA display technology, which became a de facto industry standard in the late 1980s.
At higher resolutions the "Q" prefix sometimes means "Quad" or four times the display resolution (e.g. QXGA which is 2048 × 1536).

When I try to read a PDF file, the window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

HT4623 My iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

y iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting th

The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting the particular pattern.
The problem does not appear, if PH Elements 13 is executed in the administrator mode.
The available computer resources are rather large enough: CPU INTEL i7 4 cores, 16GB RAM, 1TB HDD + 32GB SSD, Windows 8.1.
Please, advice how to solve this problem? Maybe, there is patch or updating available?

Dear n_pane,
Thank you for the quick answer. In the meantime I found other way to pass by the problem. I increased the cache level up to the maximum value 8.
The errors reported as "No more virtual tiles can be allocated" vanish, but I still do not understand, why PSE 13 cannot work properly by the lower cache levels, having available maximum resources it needed (10443 MB RAM and 26.53GB SSD space for scratches), or cannot collaborate with the fast SSDs properly.
I wish you all the best in the New Year 2015!

[SOLVED] The 773 vga mode?

Similar Messages

Maybe you are looking for