[SOLVED] Two Questions about b43-firmware AUR Package

Hi. On my old laptop, my wifi adapter worked out-of-the-box / no extra driver installation required. On my new laptop I have the Broadcom BCM43228 wi-fi adapter. Up to this point I have just been using the proprietary broadcom-wl driver, which has worked fine but it has been annoying having to rebuild (that is: install latest linux-headers, run makepkg) and reinstall broadcom-wl every time the linux kernel is upgraded. I discovered that the open-source b43 firmware recently added support for the chip. So I have two questions...
1. With b43, would I still need to rebuild/reinstall the package every time the kernel is upgraded?
2. Is there any way to know if the linux kernel will integrate b43 some day? Is this something that happens? I'm assuming it must be because I didn't have to install anything extra to use the wi-fi adapter on my old laptop. Maybe there's some schedule online of when the linux kernel developers intend to integrate open-source drivers/firmware directly into the kernel?
Thanks!
Last edited by tony5429 (2015-03-02 23:25:58)

tony5429 wrote:I discovered that the open-source b43 firmware recently added support for the chip.
It's not firmware that added support, it's the driver.
driver = code that runs in the kernel
firmware = code that runs on the device itself
tony5429 wrote:1. With b43, would I still need to rebuild/reinstall the package every time the kernel is upgraded?
Nope, the firmware isn't tied to a particular kernel.
tony5429 wrote:2. Is there any way to know if the linux kernel will integrate b43 some day?
The kernel does have b43 integrated. What the package installs isn't the driver, it's the firmware that gets uploaded onto the wifi card.
A lot of firmware is distributed in the linux-firmware package. However this requires that the firmware is released under a license that allows redistribution. But the b43 firmware isn't redistributable, that's why you need to get it from AUR.
Last edited by Gusar (2015-02-08 21:22:33)

Similar Messages

[SOLVED] Some questions about a recently submited package (cgames)

Hi there, when searching for ncurses sokoban-like games I ended up finding a great one that wasn't at the AUR yet. I submitted it (the package is named cgames) but I have some questions.
1- The source code provided by the developer has 3 games. Should I have packaged each one individually? I decided this way because they are so small that I figure nobody would have a problem in having them all even when just wanting to play one of them (you can always change the make command in the PKGBUILD if you want a single game).
2 - The original package had some compiling problems due to a function called getline (already existing in stdio.h) and I solved this problem with a sed command. Is this the proper way to do it? Should I have created some patch file or something?
3- I'm 99% sure the game works in 64bit archs, but 99 isn't 100. Can anyone try it out for me, so that I change the PKGBUILD? I know I should have tested it but I don't have the time to install a 64b arch in the next few days.
Thank you in advance
Last edited by jlcordeiro (2010-03-29 15:33:58)

Yeap, a bit
Anyway, all done (i think)
Second release:
- Replaced sed command with a patch
- Added x64 arch
- Fixed a little bug with the configure command
Last edited by jlcordeiro (2010-03-29 15:32:42)

The dark mod won't start/question about rebuilding an AUR package.

Hi...just migrated from Debian so i would be forced to learn some new things (and to tweak my system to meet my needs:P), and till now everything has worked flawlessly..today i encountered my first opportunity.
Just installed The Dark Mod and it won't start.
I got this error:
dlopen '/home/case/.doom3/darkmod/gamex86.so' failed: libjpeg.so.62: cannot open shared object file: No such file or directory.
Surfed the forums and the solutions were to rebuild the package (wich i still have to learn) or make a symlink (wich was not recomended)...the solutions were appointed in similar cases, with the same error but to other software.
I'm using libjpeg-turbo 1.1.0-1 and Doom3 runs like a charm...The mod won't...so i'm a litle confused.
The PKGBUILD of the mod does not mention this particular library since the only dependance that is written in the PKGBUILD is Doom 3...
So what i'm asking is how do i build it again to make it work with my libjpeg library?wich file do i have to modify?
Can someone point me in the right direction?
Thanks.

From AUR: https://aur.archlinux.org/packages.php?ID=31788. i intalled it with that PKGBUILD...at first i thought that with a slight modification of it i could make the mod work..but the PKGBUILD does not refer to that particular library.
(...Doom3's engine also comes from the AUR)
Sorry..i mentioned AUR in the title and then forgot to write the mod came from there...
What is bothering me is that Doom3 runs with my lib and TDM won't, it tries to open libjpeg.so.62 wich is an old library.
Last edited by coeurdechene (2011-03-10 03:43:39)

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Two Questions about Airport Express

All, I am a recent convert to using a Mac so bear with me.
I have two questions about the Airport Express.
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
Any help and advice gratefully received.

Tesserax wrote:
Hello andixbox. Welcome to the Apple Discussions!
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Yes, but at least two things to consider:
o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
I intended to use the AXn as an range extender, but you mention wireless client, is that something different?

Two questions about SG300 DHCP server

Hi,
I have two questions about the DHCP server on the SG300:
On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
Thanks,
Bob

With the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
-Tom
Please mark answered for helpful posts
http://blogs.cisco.com/smallbusiness/

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Two Questions about Adobe CS6

I've recently begun editing a film project and have two questions about Adobe Premiere Pro CS6 that I was hoping someone could answer.
1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
Thanks

1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
Yes.
It will depend on the degree of lens edge intrusion into the frame,
but an enlargement of 5-10% or so is not a big problem.
2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
Oh, yeah... lots of options (including many 3rd party plugins).
Premiere color correction
FAQ: How do I learn Premiere Pro?
http://forums.adobe.com/thread/878529?tstart=0
Getting Started with Premiere Pro CS6
http://www.video2brain.com/en/getting-started-with-premiere-pro
Adobe Premiere Pro Help and tutorials
http://helpx.adobe.com/premiere-pro/topics.html
Premiere Pro CS5-CS6 Reference
(.pdf 12 MB download)
http://helpx.adobe.com/pdf/premiere_pro_reference.pdf

Two questions about the Nokia 920 to Nokia experts...

Hi,
I am considering the Nokia 920 for replacing my Apple 4. However I have two questions that nobody in a phoneshop can answer. Furthermore I can test it myself as about all Nokia 920 in shops seems to be a dummy for showroom purposes.
Therefore I would appreciate it if somebody can answer these two questions:
1. Which versions of MS-Office can be read on the Nokia 920?
2. I have heard there are some difficulties with the Nokia 920 to watch Youtube movies. Is this true? If so, what is the solution of Nokia. If have heard to load a Metro app that solves these Youtube problems.
I have seen many videos by now about the Nokia 920 but none does cover really these questions. Thanks for taking the time to write me an answer.
Regards,
Jan
Solved!
Go to Solution.

Works with Office 2010 at least.
There is at least the latest MS Youtube app to stream video without problems.

Two Questions About SSL

When I try to stablish a secure connection (via
https://localhost:7002/AdminMain) the console gives me this error (please
see
below), which is the same when I run . startWebLogic.sh to start it.
Two questions:
1.- What is this problem about?
2.- Even with this error, I can see AdminMain in secure mode. Should I be
worried about the
error?
I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
Thanks in advance
Sergio Rios Mendoza
Departamento de Sistemas
Corporativo de Servicios Grupo Comercial Mexicana
PS: this is the error:
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
init
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

When I try to stablish a secure connection (via
https://localhost:7002/AdminMain) the console gives me this error (please
see
below), which is the same when I run . startWebLogic.sh to start it.
Two questions:
1.- What is this problem about?
2.- Even with this error, I can see AdminMain in secure mode. Should I be
worried about the
error?
I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
Thanks in advance
Sergio Rios Mendoza
Departamento de Sistemas
Corporativo de Servicios Grupo Comercial Mexicana
PS: this is the error:
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
init
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Questions about Micro-Firmware (Not 2.x.x

Hi Guys,
i got some questions about the .0.03 firmware.
) What's the difference between the :
ZenMicro_PCFW_LB__0_03_PDE.exe ,57 MB 8 Feb 05.
and the
ZenMicro_PCFW_US__0_03_PDE.exe ,8 MB 08 Dec 04 ?
Does "US" means that this is the north american version ?
So what is LB ?
2) I've got the "ZenMicro_PCFW_US__0_03_PDE.exe ,8 MB 08 Dec 04". Is there any use of upgrading to the one from 8 Feb 05 ?
3) ZenMicro_PCFW_US__0_03_PDE.exe
Does the "E" at the end means "european", so the loudness is reduced ? Must be something different because it's also included in the firmware from the american site.Message Edited by Baron on 02-20-2005 09:0 AM

From what I've picked up elsewhere in the forum, the LB version of the .0.03 firmware just includes MORE LANGUAGES (for the user interface, i.e. menus) than the US version of that same firmware. see : http://forums.creative.com/creativel...essage.id=2374 ... which, really, you should have found using the search function, before posting. --Fred.
/edit: linkified.
Message Edited by fred_be9300 on 02-20-2005 06:48 PM

[SOLVED] Basic question about x2go, freenx, etc. compatibility

My goal is to simply enable remote desktop on my soon to be headless server. Given the number of posts here at Arch explaining the trouble with freenx and the Arch support of x2go, I'm confused there is not more talk about their compatibility. And as I've just discovered, they're not:
"Various open source terminal server projects such as x2go also use the NX protocol; however, x2go is not compatible with other NX servers and clients." (NX Technology)
This leaves me in a bit of a pickle. CentOS doesn't support x2go, and Arch doesn't support freenx. What's the best interoperable solution then? Either a sever app which supports x2go or a client app that supports NXX?
Last edited by xtian (2013-09-17 21:56:10)

xtian wrote:Speaking of way of doing things. CentOSers are very persnickty about how you're supposed to maintain your system in terms of non-core packages etc. etc. And x2go is not coming up in the forum, wiki, or in the repositories (via the commanline tool yum). Read the response to my question about installing vim7.4. Hell, you can do _whatever you want_ to your system, but that doesn't mean anyone's going to help you when you run into trouble.
That comment strikes me as perfectly reasonable. The comment is pointing out that you are trying to use the wrong tool to do the job. The tool in this case is the distro - CentOS is not intended to be used in this way (for this job). Of course, if you insist on using a spanner to hammer nails, you are free to do so. But you can't really expect your local DIY shop to help you use the spanner when the nails don't go in straight rather than suggesting you use a hammer instead.
It is just like somebody who comes here and asks how they can stick with a known-stable set of packages while getting security updates. That's not what Arch is designed for so if you try to use it that way, you'll have a hard time. Of course, you are free to do so if you wish. But if you ask for help, you'll be pointed to another distro because that is the right answer.
It has nothing to do with being "persnickty". The answer is the most helpful answer somebody can give you.
Note: I'm assuming the description of CentOS, Fedora etc. is correct. I know the description of Fedora to be correct but I don't actually know anything about CentOS. But on the assumption that description is also correct, that answer is the most helpful answer somebody could give you, even if it is not the answer you wanted to hear.
Last edited by cfr (2013-09-10 00:33:54)

Two questions about WSSE

Hi all,
I came across the Web Service Security tutorial (Investigate.jws) that comes with WebLogic Workshop. Now I've two questions:
- How can I test a web service that requires encryption in the request since the test client that Workshop generates doesn't seem to take care of the <encryptionRequired> tag I added to the <wsSecurityIn> element of the WSSE file?
- How can I expose my WS to a changing set of customers without redeploying the service if I have to declare client aliases (at least) in the WSSE file?
Can somebdy help solve these issues?
Regards.
Antonio.

You can set usage limits from your my verizon page by purchasing Family Base for 5.00 a month. As for checking your my verizon usage, if your cycle date is really the 12th then it should track your usage from the 13th-12th of every month, like this month for example your my verizon should show you usage from 10/13/2013-11/12/2013.

[Solved] Quick question about yaourt

I was just wondering if it is save to update my regular packages with yaourt using 'yaourt -Syu --devel --aur' or 'yaourt Syua'. I've heard about problems with having to have root access to update regular programs and it's a very bad thing to build AUR packages while root. I want to be able to update my AUR packages like I can with 'pacman -Syu' and if I could do them all at the same time, well that would be even better.
Last edited by slughappy1 (2011-10-27 16:46:44)

Parmazae wrote:
slughappy1 wrote:Ok, thanks for the replies. So as I understand it Yaourt will build the AUR packages as me (non root when called) and then will only ask for root access when installing/updating packages using pacman?
Correct .
Sweet, thanks.

Two questions about defining class, pls help me

Hi, guys. I'm green hand and here are two questions puzzled me several days.
We know such example as below is a case of cyclic inheritance
class Base extends Base{
But I can't figure out why below is a case of cyclic inheritance too
class Base{
class Derived extends Base{
class Base{
I can't find the clue of cyclic inheritance. It's quite different from the case that a class extends itself or its subclass.
Another question is why the inner class can't have the same name of outer?
class Base{
class Base{
The compiler says Base is already defined in unnamed package. As it says, the inner class is defined in the
unnamed package, but we know below is correct.
class Base{
class Basic{
class Derived {
class Basic{
We know it's correct. But as the compiler says above, the different two inner class Basic are both defined in the
unnamed package. Why it's valid and why above is invalid?

Hi,
Can you tell us which product (s) you are referring to ? Can you also tell us the nature of your business requirements so that we can offer some suggestions ?
Regards,
Sandeep

[SOLVED] Two Questions about b43-firmware AUR Package

Similar Messages

Maybe you are looking for