[solved] udev = systemd-tools: system no longer boots completely

Hi guys. Today I updated my system, and now it won't boot past the boot messages. It appears that my ttys aren't being "made" (?). The actual errors appear to be
[ TIME ] Timed out waiting for device dev-tty2.device
[ TIME ] Timed out waiting for device dev-tty3.device
Booting into rescue.target doesn't complete either.
Downgrading systemd-184-2 => systemd-44-7, and replacing systemd-tools with udev allows me to boot successfully again.
Additional info:
cpu: Intel Core i5-3570K
kernel: linux-3.3.7-1-x86_64
graphics card: GeForce GTX 560 Ti
graphics driver: xf86-video-nouveau 0.0.16_git20120512-1 (relevant, maybe? 0.0.16_git20120512-2 makes X give up with a "No screens found" error
system init: systemd (via systemd-sysvcompat)
Advice please.
EDIT: boot screen images
EDIT EDIT: I can connect via SSH to the affected machine. Here's the journal: http://codepad.org/76aB2DnD
EDIT EDIT EDIT: That apparently got snipped. Here's part 2, starting from line 806: http://codepad.org/5UGdsuwE
Last edited by WorMzy (2012-06-02 00:15:21)

Huh. I guess the problem was a couple of stale and crusty {,f}getty .service files, and an obsolete slim.service file I created a while back.
Removing them fixed my problem, although tty1 still shows boot messages (not a problem, and may not even be "new" behaviour)
Cheers Tomegun.

Similar Messages

  • [SOLVED] After pacman update, system no longer boots

    Updated pacman packages, and half-way through the upgrade proces fails (it mentions not being able to find package-control).  Upon investigating, I notice no programs are working.  I ls /usr/bin and it is empty!  In a panic, I restart the machine, and it no longer boots up. 
    My boot is on sda3 and /root is sda5.
    When bash starts up, it loads the kernel fine, and then after a second it panics and exclaims: "No init found. Try passing init=bootarg". 
    I load up my trusty Arch livecd and fsck the partitions.  Fsck claims both partitions are clean.  I am able to mount them and examine the file structure: all files look like they are there.  I then try to chroot the mounted partition (sda5, my /root), and get the error that "/bin/bash" is not found, even though it is there in the correct directory.  Not sure what to do now.
    My grub entry, which has always worked fine prior to this:
    legacy_kernel '/linux344-ck' 'acpi_osi=Linux' 'root=/dev/sda5' 'rootfstype=ext4' 'init=/sbin/init' 'pcie_aspm=force' 'acpi_backlight=vendor' 'i915.i915_enable_rc6=1' 'i915.i915_enable_fbc=1' 'i915.lvds_downclock=1' 'ipv6.disable=1' 'i915.semaphores=1' 'modprobe.blacklist=bluetooth,uvcvideo' 'ro'
    legacy_initrd '/initramfs-linux-fallback.img' '/initramfs-linux-fallback.img'
    UPDATE: solved issue.  I didn't read the news.  Upgrading via pacman broke my system because of this.  Now I know!  System is running smooth again.
    Last edited by corruptz0r (2012-07-15 20:26:53)

    Huh. I guess the problem was a couple of stale and crusty {,f}getty .service files, and an obsolete slim.service file I created a while back.
    Removing them fixed my problem, although tty1 still shows boot messages (not a problem, and may not even be "new" behaviour)
    Cheers Tomegun.

  • [Solved] problems after "udev - systemd-tools" update

    Hello,
    After the last pacman -Syu the keyboard, the mouse and the sound card of my notebook have stopped working..
    The last update was:
    Pacchetti (10): dnsmasq-2.62-1 fakeroot-1.18.4-1 filesystem-2012.6-2
    geoip-database-20120606-1 icu-49.1.2-1 krb5-1.10.2-1
    libsystemd-185-1 mx-1.4.6-1 rsync-3.0.9-3
    systemd-tools-185-1
    the keyboard works in a tty shell, doesn't work only in X... but if i plug an USB mouse or keyboard the plugged device works also fine in X.
    this is my modules and daemons in rc.conf:
    MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave vboxdrv bridge tun)
    DAEMONS=(hwclock syslog-ng dbus !network @networkmanager @netfs @crond @sensors @bluetooth gdm)
    thanks to everyone
    Last edited by Gelax! (2012-06-08 10:04:51)

    I have a SSD, I read on the forum that a possible optimization was to mount in ram /var/run and /var/lock...
    before having these problems I mounted it in this way and everything worked perfectly.
    none /var/run tmpfs mode=0755,size=10m,noatime,nosuid 0 0
    none /var/lock tmpfs mode=1777,size=10m,noatime,nosuid,nodev,noexec 0 0
    after the system upgrade i have tryed to mount /run in ram but that created these problems...
    so I just mounted /run/lock in ram and everything works fine
    Last edited by Gelax! (2012-06-08 12:16:35)

  • [SOLVED] Switch to systemd - Now system won't boot

    I saw that todays update upgrade included the installation of systemd. I looked the wiki and did the necessary changes (I already had made the /etc/hostname etc. files). So I added the
    init=/bin/systemd
    line to grub and now my system won't boot. I get an error saying something about syslog service not enabled and then a black screen. I can boot my machine fine without the "init=/bin/systemd" line but I want to run a pure systemd system since Arch is moving to it anyway. In the wiki it mentions to install systemd-sysvcompat but it conflicts with initscripts it says. What am I doing wrong or missing?
    Last edited by fettouhi (2013-12-08 14:42:04)

    fettouhi wrote:
    Thanks for the clarification about the DAEMONS list. My DAEMONS list is:
    DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond @alsa dbus networkmanager ufw cupsd avahi-daemon samba)
    when I try to enable alsa and dbus I get this
    [root@andre ~]# systemctl enable alsa-store.service
    The unit files have no [Install] section. They are not meant to be enabled using systemctl.
    [root@andre ~]# systemctl enable alsa-restore.service
    The unit files have no [Install] section. They are not meant to be enabled using systemctl.
    [root@andre ~]# systemctl enable dbus.service
    The unit files have no [Install] section. They are not meant to be enabled using systemctl.
    Is LVM handled automatically by systemd? The reason I ask is because I have the USELVM= set to YES in rc.conf.
    I made the permanent transition to systemd and did not start alsa at all - sound works fine - so I never bothered with the alsa-store/alsa-restore service files at all - it just works! Also dbus gets handled by default in systemd so you don't need any starting of dbus service at all... it just works.

  • System no longer boots

    Hello all.  System will not boot and before I go spending more money on pointless items, I was hoping to get some feedback, please.
    Here are current specs on system:
    MSI K8T Neo2 FIR - AMI BIOS 9.4  Athlon 64 X2 4600+ PIB
    Antec NeoPower 480 +5V/38A +12V1/18A +12V2/15A +3.3V/30A
    Kingston Value Ram 2x512 Matched Pair DDR400
    CD-R/RW & DVD+RW  WD 250g IDE
    BFG 7800GS OC  Sony SDM-HS94P 19" LCD
    Audigy 2  XP Pro
    The upgrades on this system include the X2 and the graphics card.  I know, I know, the power supply may very well be the issue, but please let me detail what's happened and if everyone still thinks the PSU is it, I'll go for a new one.
    Everything ran fine for at least a month.  Most resource hungry app I run is probably EQII.  Towards the end of last week I had a couple of complete crashes during game play and then on Saturday morning the system failed to boot.  I do have power as the case fans, CPU fan and GPU fan and various lights do go on.  It seemed like a hard drive failure to me, so I got a new one (Best Buy! OUCH! the price we pay if we want it that day) and it started up great.  I got windows loaded on the new drive, updated everything and was playing and working fine.  This was Saturday night and Sunday morning.  Sunday afternoon...not happening.  I'm back to a blank screen and lots of fans whirring and a few lights flashing but nothing else.  So, my questions:
    1. Is it possible that I somehow blew a second hard drive?
    2. Was it not the hard drive at all but something else?
    3. Will a new PSU solve the problem and will my original hard drive still work?
    4. Did Amelia Earhardt get abducted by aliens?
    Thank you for your time and patience.
    MEM

    Hans;
    Thank you for the reply.  Say hiya to Amelia for me.  Does this mean you're an alien?
    Ok, I tried using bootable CD and no go.
    I don't really have a simpler graphics card around to try that.  So that test may not happen.
    I can try with one dimm when I get home (I'm at work atm.)
    I also thought about putting the drive into another system and will try that also later today or tomorrow morning.
    D-Bracket:  I will have to watch that again.  It really didn't make sense to me as the lights went through a lot of the steps then came to a halt at what I think was BIOS Sign on.  Someone did suggest to me that I might have a virus, which may be why the second hard drive failed eventually.  But I'm not sure about that and not sure what can be done about that unless clearing CMOS would take care of it.
    So, any new thoughts?
    MEM

  • X200 auto-update BIOS upgrade failed? system no longer boots

    Hi,
    I've had an X200 for around 7 months now and just did an auto-update earlier today. One of the items was a BIOS update, so I thought what the heck, it should be fine, always has been before. The update completed correctly and shuw down for reboot as planned.
    The system now no longer boots. Nothing at all happens. When I press the power button, no matter whether with AC supply or on battery, the following happens:
    - num lock, caps lock, HDD and 'power on' lights light up for a second or so then go off again
    - they come back on again for another second, and off again
    - then only the bluetooth light and the 'power on' light remain lit, and nothing else happens
    It seems pretty fried to me. What can I do? I'm in severe despair! :'(
    Thanks in advance for your help,
    Phil

    Hans;
    Thank you for the reply.  Say hiya to Amelia for me.  Does this mean you're an alien?
    Ok, I tried using bootable CD and no go.
    I don't really have a simpler graphics card around to try that.  So that test may not happen.
    I can try with one dimm when I get home (I'm at work atm.)
    I also thought about putting the drive into another system and will try that also later today or tomorrow morning.
    D-Bracket:  I will have to watch that again.  It really didn't make sense to me as the lights went through a lot of the steps then came to a halt at what I think was BIOS Sign on.  Someone did suggest to me that I might have a virus, which may be why the second hard drive failed eventually.  But I'm not sure about that and not sure what can be done about that unless clearing CMOS would take care of it.
    So, any new thoughts?
    MEM

  • [SOLVED] upgrade using Octopi system will not boot into DM

    I did a system upgrade using Octopi late last night. I use Enlightenment and Gnome. After the upgrade the desktop froze (E), so I switched to a vt and rebooted. That failed to work, so I forced power off using the power button and went to bed. The next day I started up the laptop (lenovo t430) but the boot never got to gdm login. I stops with the line: "[ OK ] Started Accounts Service". Using htop I see that gdm is running.
    Then I opened a vt and tried to do another upgrade (pacman -Syu), but that failed with an error message stating that a libgpgme was too short. I took a look and found that both libgpgme files were empty (0 bytes). I went to my pacman cache and found the packages and use them to copy over the lib files. Pacman then worked. But booting still did not.
    All this made me curious, so I checked my /usr/lib dir and found 54 lib files empty. I'm certainly no system expert, but this doesn't seem like a good sign to me. When ldconfig is run a very long list of empty libs is printed to the screen.
    At any rate, I'm wonder if anyone else ran into this issue and (of course) if anyone has a solution for this? I really don't want to go through each empty lib and copy the files by hand if I can avoid it.
    Any help would be very appreciated.
    TIA
    Gary
    Last edited by henrythemouse (2014-12-31 05:45:05)

    jasonwryan wrote:
    Please edit your title to reflect the fact that Octopi borked your system.
    https://wiki.archlinux.org/index.php/Pa … an_upgrade
    Thank you for the link, not to mention the quick reply.
    The packages python-packagekit and packagekit had to be removed before I could start the installation as they had a dependency on a older version of pacman. My mirrors file caused a good deal of packages to not be downloaded, so that had to be changed. Afterwards everything went well. This experience has shown me the strength of the Arch package system, it's really an amazing system.
    I tried the recommended command from the above link but kept getting numerous error messages stating that such and such file already existed on the filesystem. Which was true enough, so I added the --force parameter and that did the trick.
    This is the command I used to get running again:
    pacman -S $(pacman -Qnq) --force                             
    Problem solved. Except I have to wonder how it was caused in the first place. If it was caused by using Octopi, I guess I should run that by the author. And I'll have to either go back to using the command line or try another gui.
    Last edited by henrythemouse (2014-12-31 05:43:13)

  • [SOLVED] Borked systemd setup -- dbus errors during boot; can't login

    I have error messages very similar to this post. Unfortunately, as the author states, he never persisted in solving it but instead re-installed from scratch. I'd rather not do that.
    For reference, I have a pure systemd setup -- no rc.conf file, no initscripts package, etc.
    At boot I get the "Welcome to Arch!" messages followed by the various [OK] lines and then I get blindingly fast repeating lines about dbus not starting and attempting to restart it too quickly. If I walk away for about 1-2min, I finally see a login screen, but after entering my username/password, it just sits there and does nothing.
    As for suspects... I had systemd working fine.
    -- I updated some packages (not more than a few days worth and I'd have to check the list)
    -- I also took care of manual updates to some .pacnew files I periodically check for. In this group were some biggies: group, shadow, and passwd. I did recall the odd bit about uuidd changing from uid 995 to 68, but in reading about that since then, it doesn't seem to be a big deal.
    I've been booting in by appending
    systemd.unit=emergency.target
    to the kernel line, but my exploration hasn't been all that helpful. `journalctl since=date` reveals the errors, but I don't get much information about why dbus is having issues starting.
    emergency.target also doesn't seem to be that helpful since I can't do anything with a read-only system. I'd love some suggestions about what, specifically, to check for before I reboot from Windows back into Arch and record more careful notes, probably by jotting notes onto a flash drive. Any places to start? For reference, I've done:
    -- systemctl status dbus: lists as inactive (dead) and simply shows the errors I see at boot (failed to start)
    -- systemctl list-units
    -- systemctl list-unit-files
    -- journalctl and looking around for instances of fail or failed or dbus
    If I start systemd-logind.service or dbus.service, it displays a status message about running fsck and then takes me to a login prompt automatically. Then I can type in my username and password and then there's nothing after that. No prompt, just an apparent hang.
    Thanks for any suggestions -- I'll take them and then collect more detailed results and report back.
    Thanks!
    Last edited by jwhendy (2012-11-08 16:07:33)

    As I wondered, I think it's a problem with passwd. I don't have a dbus entry and must have missed it when I was copying things around between my version and the .pacnew. Downloading an install disc now since I can't seem to change it from the recovery console due to mounting root read-only.
    I'd love to know of a way to boot that avoids starting dbus and other things that might break while still having read/write access to root. Will mark solved once I update /etc/passwd and reboot.

  • System no longer boots after hard-reboot.

    After I installed GNOME 3 from [testing] the system compleatly locked up, so I took out the battery and plugged it back in. Now at every boot I get this message.
    Since fixing a netbook is a huge pain (no CD drive) I took out the 2.5" drive and installed it in my other Arch desktop. What files should I copy over to fix this?

    Do I have to now uninstall the kernel26 and install it again when I'm done?
    [root@localhost ROOT_ARCH]# chroot . /bin/bash
    [root@localhost /]# pacman -Q mkinitcpio
    mkinitcpio 0.6.9-1
    [root@localhost /]# uname -a
    Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011 x86_64 Pentium(R) Dual-Core CPU E5400 @ 2.70GHz GenuineIntel GNU/Linux
    [root@localhost /]# wget http://schlunix.org/archlinux/core/os/i686/mkinitcpio-0.6.8-1-any.pkg.tar.xz
    --2011-04-10 13:42:53-- http://schlunix.org/archlinux/core/os/i686/mkinitcpio-0.6.8-1-any.pkg.tar.xz
    Resolving schlunix.org... 75.119.219.151
    Connecting to schlunix.org|75.119.219.151|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 18332 (18K) [application/x-tar]
    Saving to: “mkinitcpio-0.6.8-1-any.pkg.tar.xz”
    100%[==========================================================================================================================================================================================>] 18,332 90.7K/s in 0.2s
    2011-04-10 13:42:54 (90.7 KB/s) - “mkinitcpio-0.6.8-1-any.pkg.tar.xz” saved [18332/18332]
    [root@localhost /]# pacman -U mkinitcpio-0.6.8-1-any.pkg.tar.xz
    warning: downgrading package mkinitcpio (0.6.9-1 => 0.6.8-1)
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: kernel26: requires mkinitcpio>=0.6.8-2
    [root@localhost /]#
    EDIT: I used the wrong version, it worked now.
    [root@localhost /]# wget http://schlunix.org/archlinux/core/os/i686/mkinitcpio-0.6.8-2-any.pkg.tar.xz
    --2011-04-10 13:58:26-- http://schlunix.org/archlinux/core/os/i686/mkinitcpio-0.6.8-2-any.pkg.tar.xz
    Resolving schlunix.org... 75.119.219.151
    Connecting to schlunix.org|75.119.219.151|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 18324 (18K) [application/x-tar]
    Saving to: “mkinitcpio-0.6.8-2-any.pkg.tar.xz”
    100%[==========================================================================================================================================================================================>] 18,324 71.4K/s in 0.3s
    2011-04-10 13:58:27 (71.4 KB/s) - “mkinitcpio-0.6.8-2-any.pkg.tar.xz” saved [18324/18324]
    [root@localhost /]# pacman -U mkinitcpio-0.6.8-2-any.pkg.tar.xz
    warning: downgrading package mkinitcpio (0.6.9-1 => 0.6.8-2)
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): mkinitcpio-0.6.8-2
    Total Download Size: 0.00 MB
    Total Installed Size: 0.22 MB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [####################################################################################] 100%
    (1/1) checking for file conflicts [####################################################################################] 100%
    (1/1) upgrading mkinitcpio [####################################################################################] 100%
    warning: /etc/mkinitcpio.conf installed as /etc/mkinitcpio.conf.pacnew
    New optional dependencies for mkinitcpio
    xz: Use lzma compression for the initramfs image
    [root@localhost /]# mv /etc/mkinitcpio.conf.pacnew /etc/mkinitcpio.conf
    [root@localhost /]# mkinitcpio -p kernel26
    ==> Building image "default"
    ==> Running command: /sbin/mkinitcpio -k 2.6.38-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    :: Begin build
    :: Parsing hook [base]
    :: Parsing hook [udev]
    :: Parsing hook [autodetect]
    :: Parsing hook [pata]
    :: Parsing hook [scsi]
    :: Parsing hook [sata]
    :: Parsing hook [filesystems]
    :: Generating module dependencies
    :: Generating image '/boot/kernel26.img'...SUCCESS
    ==> SUCCESS
    ==> Building image "fallback"
    ==> Running command: /sbin/mkinitcpio -k 2.6.38-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    :: Begin build
    :: Parsing hook [base]
    :: Parsing hook [udev]
    :: Parsing hook [pata]
    :: Parsing hook [scsi]
    :: Parsing hook [sata]
    :: Parsing hook [filesystems]
    :: Generating module dependencies
    :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    ==> SUCCESS
    [root@localhost /]#
    Last edited by infested999 (2011-04-10 18:03:25)

  • [solved] udev fails to register anything on boot after kmod

    Hello,
    After yesterday's kmod upgrade, i can't seem to get udev to modprobe anything on boot. Udev throws about two dozen errors during boot complaining about "no such file or directory", but /sbin/modprobe exists, and seems to work fine with udev after the boot process is complete. i know this because i can remove and replace the USB cables to the computer, and udev picks up and modprobes the correct drivers. The same devices (keyboard, mouse) fail to load during boot.
    I would throw in the errors, but dmesg doesn't seem to catch them. Most are of the form "udev: error: /sbin/modprobe "/sbin/modprobe [some "dash arguments"]  usb:*huge alphanumeric string*" This is from memory, so excuse any probable inaccuracies.
    Any ideas or starting points?
    Thanks,
    --Aaron
    Last edited by usagi (2012-01-07 00:58:47)

    falconindy wrote:
    falconindy wrote:
    usagi wrote:So, now my query becomes: is there a way to mount an arbitrary drive before boot commences?
    Expect support for this (mounting /usr) in mkinitcpio "soon". If you want to help speed along the process, here's an untested patch. Zero assumptions are made about the partition -- you will need to include any modules necessary for creating the partition in MODULES= (if it differs at all from your / partition).
    I should point out that  it's actually a little more involved than just "apply the patch".
    1) make sure you have util-linux>=2.20.1-2
    2) add 'shutdown' and 'fsck' to your initramfs hooks in /etc/mkinitcpio.conf. shutdown only needs to be somewhere after base. 'fsck' should go after autodetect if your /usr is the same FS as root, before autodetect if its different.
    3) apply said patch.
    4) in /etc/fstab, set passno to 0 for your /usr partition (it'll be checked in the initramfs)
    5) regenerate your initramfs.
    Thanks to usagi for testing this and providing valuable feedback.
    the patch worked for me. my /usr is ext4 on lvm.

  • After upgrade system no longer boots, and (apparently) no USB

    So I've got Arch installed on my mom's computer. Apparently she did an update and now this: http://imgur.com/AQBZLQV
    ERROR: Unable to find root device 'PARTUUID<stuff>'
    It drops to a shell, but the shell doesn't work. Possibly because it's a USB keyboard? The keyboard works in the BIOS just fine, but when it hits that screen - nada.
    Of course, she's not *that* savvy, so I don't think she paid any attention to what exactly was updating. So far the only information I've got from her is that she updated, restarted, and death.
    I'm assuming it'd be possible to get back in there and rescue it with a disk - maybe grub got pooched? I actually had similar problems when I initially set up the machine and forgot some steps...

    hey bro, I had to change my hooks in mkinitcpio.conf. Might be a different problem. might be related.
    https://bbs.archlinux.org/viewtopic.php?id=189090
    Last edited by ninjaaron (2014-10-29 19:08:32)

  • Can't replace udev with systemd-tools (file conflict)

    Hello,
    just want to update, im getting this output:
    (26/26) Überprüfe Paket-Integrität [######################] 100%
    (26/26) Lade Paket-Dateien [######################] 100%
    (26/26) Prüfe auf Dateikonflikte [######################] 100%
    Fehler: Konnte den Vorgang nicht durchführen (In Konflikt stehende Dateien)
    systemd-tools: /usr/share/man/man5/hostname.5.gz existiert im Dateisystem
    systemd-tools: /usr/share/man/man5/locale.conf.5.gz existiert im Dateisystem
    systemd-tools: /usr/share/man/man5/vconsole.conf.5.gz existiert im Dateisystem
    Fehler sind aufgetreten, keine Pakete wurden aktualisiert.

    Check SOLVED udev/systemd-tools - can't upgrade

  • Trouble with booting system after upgrade udev= systemd

    Hi everybody,
    I have been trouble with my system since last upgrade (udev => systemd)
    My issue is something like this: https://bbs.archlinux.org/viewtopic.php?pid=1106157 but advice from this discussion doesn't work.
    When system booting, *immediately* (very fast, too fast) display login screen after start parsing hook [udev]
    Of course, i can't login - type username and i have redraw screen again on all /dev/tty* - i have no chance to type password.
    Many invalid logins suspend init for 5 minutes and allow me see display error due stop redraw screen - libpam.so.0 cannot find.
    I suspect that, partitions aren't mount (this fast login screen doesn't have even hostname). I have a 4 discs, with many partitions - mounting
    this take a some time (+- 5 secs).
    In rescuecd, i can mount all partitions and chroot. In chroot all works fine - /bin/login (i was checked authorization on all users),
    paths and pams are ok. Of course i try ,,default rescue trick'': `pacman -Suy linux udev mkinitcpio` and 'mkinitcpio -p linux' on rescuecd
    but nothing it's changed after reboot. I checking grub config, and unpack and check initramfs-linux.img - all ok.
    In my mkinitcpio.conf ofcourse i have MODULES="ext3" (for my filesystems).
    Please help.

    crab wrote:
    This may or may not be related... but I saw this message just now during an upgrade:
    (121/168) upgrading mkinitcpio [###################] 100%
    ==> If your /usr is on a separate partition, you must add the "usr" hook
    to /etc/mkinitcpio.conf and regenerate your images before rebooting
    And am wondering what the message means by if /usr is on a separate partition - separate partition to what?  /boot? / ?
    I have my /usr partition in the same partition as /  (but /boot is in a different partition)
    Logic tells me I'm safe (haven't rebooted yet), as / is "master", and anything else is a separate partition, and I have /usr on the same partition as /.
    Do you guys have separate /usr and/or /boot partitions?  As stated in first sentence this may not be related, but looks important...
    It means separate from /. So yes, you're right, you are "safe" from having to do anything with this message on your system.
    And to the other people on this thread: make sure you do have all your packages uniformly updated, including any pam-related AUR or ABS-build packages. libpam and the pam module directory (.../lib/security) were moved from /lib to /usr/lib a little while back, so make sure that anything that cares about where these may be have been updated so they aren't confused by this move.
    Last edited by ataraxia (2012-06-03 22:40:22)

  • [Solved again] Updated to linux-3.10.8; Can no longer boot

    Hey everyone.
    So, linux-3.10.2-1 just dropped to the [testing] repos, and I got it through a standard -Syu. Along with it were upgraded libxfont, linux-headers, lirc-utils (and I installed extundelete during the same command).
    Here's the relevant bit of /var/log/pacman.log:
    [2013-07-22 11:03] [PACMAN] Running 'pacman --color=always -Syu extundelete'
    [2013-07-22 11:03] [PACMAN] synchronizing package lists
    [2013-07-22 11:03] [PACMAN] starting full system upgrade
    [2013-07-22 11:06] [PACMAN] installed extundelete (0.2.4-1)
    [2013-07-22 11:06] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
    [2013-07-22 11:07] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-07-22 11:07] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Starting build: 3.10.2-1-ARCH
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Starting build: 3.10.2-1-ARCH
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-07-22 11:07] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-07-22 11:07] [PACMAN] upgraded linux (3.10.1-1 -> 3.10.2-1)
    [2013-07-22 11:07] [PACMAN] upgraded linux-headers (3.10.1-1 -> 3.10.2-1)
    [2013-07-22 11:07] [PACMAN] upgraded lirc-utils (1:0.9.0-51 -> 1:0.9.0-52)
    Then, because I am on a UEFI system, I copied the initrd images and the vmlinuz image over to my ESP (just like I've done many a time before), and now the system won't boot. It doesn't throw any errors; rather, as soon as UEFI selects the entry to run, the computer just sits there (there is nothing in the logs so far as I can find).
    I've booted with a live medium and I've tried regenerating the images and recopying them (the checksums of the images changed, so I figured that might do the trick), but it's still a no-go. Is there something obvious that I'm missing? Has anyone else run into this problem?
    [Edit]: Though this appeared to be solved with 3.10.3, the problem appears to have returned with 3.10.8. No actual solution has been found. As with before, a new kernel has been released (3.10.9) with which this issue does not exist…
    All the best,
    -HG
    Last edited by HalosGhost (2013-08-21 17:01:46)

    So I added /boot to my fstab with option "auto" to not rely on the systemd-efi-generator and /boot was mounted just fine. Then I set noauto,x-systemd.automount and the autofs mount point was created as expected. Then I removed the /boot entry in fstab again and the systemd-efi-generator seems to work fine again...
    I'm seriously confused right now...
    btw, I did all of this mit kernel 3.9.9 booted. 3.10.2 doesn't boot on my system, it's the famous ""EFI machine randomly hangs while loading kernel" bug again. But this shouldn't have anything to do with the kernel install problem...
    edit: I just realized that my "btw" is actually what OP describes. I should have read the thread completely, sorry
    Either way, as far as I can see these are two separate issues. The EFI bug with the long thread that I mentioned above and the fact that /boot seems to not mount in some cases. I did some more testing regarding this, but I still have no idea what is happening. I could have sworn there was no automount point set up by systemd at some point, which would have made sense. But I can't reproduce it anymore...
    Last edited by 65kid (2013-07-23 21:54:55)

  • [Systemd] Very long boot time

    I have a very long boot time with my Arch.
    Startup finished in 828766ms (kernel) + 63430ms (userspace) = 892196ms
    Especially after login into gnome, it takes quite a while until the desktop is visible. In meanwhile, I only see the wallpaper.  Does anyone has a suggestion how to fix that?
    Linux hostname 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
    systemd-analzye blame shows
    18722ms colord.service
    16584ms home.mount
    12666ms plymouth-start.service
    11550ms boot.mount
    11350ms var.mount
    7604ms NetworkManager.service
    7261ms chrony.service
    1985ms wpa_supplicant.service
    1606ms systemd-modules-load.service
    1350ms systemd-tmpfiles-setup.service
    1202ms dev-hugepages.mount
    1189ms dev-mqueue.mount
    1080ms sys-kernel-debug.mount
    987ms systemd-udev-trigger.service
    946ms systemd-udevd.service
    879ms systemd-vconsole-setup.service
    495ms bluetooth.service
    376ms polkit.service
    358ms crashplan.service
    348ms systemd-readahead-replay.service
    346ms lm_sensors.service
    337ms upower.service
    331ms systemd-readahead-collect.service
    311ms systemd-logind.service
    289ms lvmetad.service
    286ms systemd-binfmt.service
    242ms cpupower.service
    206ms systemd-remount-fs.service
    174ms gdm.service
    140ms proc-sys-fs-binfmt_misc.mount
    94ms udisks2.service
    93ms rtkit-daemon.service
    87ms rc-local.service
    86ms systemd-user-sessions.service
    53ms systemd-sysctl.service
    24ms accounts-daemon.service
    2ms tmp.mount
    1ms sys-fs-fuse-connections.mount
    Dmesg shows:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7282000-0x00000000c73ebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c73ec000-0x00000000c740efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c771f000-0x00000000c7770fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7771000-0x00000000c779efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c779f000-0x00000000c77e1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c77e2000-0x00000000c77fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f1004000-0x00000000f1004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Studio XPS 1645/0Y517R, BIOS A13 04/01/2011
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-D3FFF write-through
    [ 0.000000] D4000-D7FFF uncachable
    [ 0.000000] D8000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask FE0000000 write-back
    [ 0.000000] 6 base 220000000 mask FF0000000 write-back
    [ 0.000000] 7 base 230000000 mask FF8000000 write-back
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f7360-0x000f736f] mapped at [ffff8800000f7360]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xc77fffff]
    [ 0.000000] [mem 0x00000000-0xc77fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xc77fffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x237ffffff]
    [ 0.000000] [mem 0x100000000-0x237ffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x237ffffff @ [mem 0xc77dc000-0xc77e1fff]
    [ 0.000000] RAMDISK: [mem 0x376e0000-0x37b67fff]
    [ 0.000000] ACPI: RSDP 00000000000f7280 00024 (v02 PTLTD )
    [ 0.000000] ACPI: XSDT 00000000c77f4285 00064 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000c77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000c77e5000 0A839 (v02 Intel CALPELLA 06040000 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000c779bfc0 00040
    [ 0.000000] ACPI: HPET 00000000c77fecc2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000c77fecfa 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: APIC 00000000c77fed36 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000c77fedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000c77fee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: OSFR 00000000c77fef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: SSDT 00000000c77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
    [ 0.000000] NODE_DATA [mem 0x237ffc000-0x237ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x237ffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc727bfff]
    [ 0.000000] node 0: [mem 0xc7282000-0xc73ebfff]
    [ 0.000000] node 0: [mem 0xc740f000-0xc746efff]
    [ 0.000000] node 0: [mem 0xc770f000-0xc7717fff]
    [ 0.000000] node 0: [mem 0xc771f000-0xc7770fff]
    [ 0.000000] node 0: [mem 0xc779f000-0xc77e1fff]
    [ 0.000000] node 0: [mem 0xc77ff000-0xc77fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
    [ 0.000000] On node 0 totalpages: 2094193
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 795941 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19968 pages used for memmap
    [ 0.000000] Normal zone: 1257984 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000
    [ 0.000000] PM: Registered nosave memory: 00000000c73ec000 - 00000000c740f000
    [ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000
    [ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000
    [ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7718000 - 00000000c771f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7771000 - 00000000c779f000
    [ 0.000000] PM: Registered nosave memory: 00000000c77e2000 - 00000000c77ff000
    [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
    [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f1004000
    [ 0.000000] PM: Registered nosave memory: 00000000f1004000 - 00000000f1005000
    [ 0.000000] PM: Registered nosave memory: 00000000f1005000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s84608 r8192 d21888 u262144
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2057835
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8162844k/9306112k available (4727k kernel code, 929340k absent, 213928k reserved, 4143k data, 768k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1596.068 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.14 BogoMIPS (lpj=5320226)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000044] Security Framework initialized
    [ 0.000048] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003923] Mount-cache hash table entries: 256
    [ 0.004173] Initializing cgroup subsys cpuacct
    [ 0.004176] Initializing cgroup subsys memory
    [ 0.004184] Initializing cgroup subsys devices
    [ 0.004186] Initializing cgroup subsys freezer
    [ 0.004188] Initializing cgroup subsys net_cls
    [ 0.004189] Initializing cgroup subsys blkio
    [ 0.004216] CPU: Physical Processor ID: 0
    [ 0.004217] CPU: Processor Core ID: 0
    [ 0.004222] mce: CPU supports 9 MCE banks
    [ 0.004234] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004241] process: using mwait in idle threads
    [ 0.004246] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift is 0x6
    [ 0.005569] ACPI: Core revision 20120711
    [ 0.021739] ftrace: allocating 18347 entries in 72 pages
    [ 0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067503] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
    [ 0.172651] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.172658] perf_event_intel: CPU erratum AAJ80 worked around
    [ 0.172659] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.172661] ... version: 3
    [ 0.172662] ... bit width: 48
    [ 0.172663] ... generic registers: 4
    [ 0.172665] ... value mask: 0000ffffffffffff
    [ 0.172666] ... max period: 000000007fffffff
    [ 0.172667] ... fixed-purpose events: 3
    [ 0.172669] ... event mask: 000000070000000f
    [ 0.199435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.212646] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
    [ 0.379170] Brought up 8 CPUs
    [ 0.379175] smpboot: Total of 8 processors activated (25547.13 BogoMIPS)
    [ 0.385494] devtmpfs: initialized
    [ 0.387562] PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
    [ 0.387574] PM: Registering ACPI NVS region [mem 0xc7771000-0xc779efff] (188416 bytes)
    [ 0.388860] NET: Registered protocol family 16
    [ 0.389041] ACPI: bus type pci registered
    [ 0.389136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.389139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.432597] PCI: Using configuration type 1 for base access
    [ 0.433425] bio: create slab <bio-0> at 0
    [ 0.433488] ACPI: Added _OSI(Module Device)
    [ 0.433490] ACPI: Added _OSI(Processor Device)
    [ 0.433491] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.433493] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.435530] ACPI: EC: Look up EC in DSDT
    [ 0.437476] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.442713] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.443644] ACPI: SSDT 00000000c771aa98 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444142] ACPI: Dynamic OEM Table Load:
    [ 0.444145] ACPI: SSDT (null) 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444332] ACPI: SSDT 00000000c7719018 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.444806] ACPI: Dynamic OEM Table Load:
    [ 0.444809] ACPI: SSDT (null) 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.445201] ACPI: SSDT 00000000c771a718 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445749] ACPI: Dynamic OEM Table Load:
    [ 0.445753] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445922] ACPI: SSDT 00000000c7718d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.446432] ACPI: Dynamic OEM Table Load:
    [ 0.446435] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.448062] ACPI: Interpreter enabled
    [ 0.448066] ACPI: (supports S0 S3 S4 S5)
    [ 0.448089] ACPI: Using IOAPIC for interrupt routing
    [ 0.448593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.455392] ACPI: Power Resource [FN00] (off)
    [ 0.455494] ACPI: Power Resource [FN01] (off)
    [ 0.456110] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.456339] ACPI: No dock devices found.
    [ 0.456343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.456813] \_SB_.PCI0:_OSC invalid UUID
    [ 0.456815] _OSC request data:1 8 1f
    [ 0.456820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.457600] PCI host bridge to bus 0000:00
    [ 0.457604] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
    [ 0.457607] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.457610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.457612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.457615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.457617] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.457619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.457622] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.457624] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
    [ 0.457627] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.457638] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
    [ 0.457700] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
    [ 0.457759] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.457783] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
    [ 0.457850] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
    [ 0.457917] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
    [ 0.457983] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
    [ 0.458043] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
    [ 0.458094] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
    [ 0.458170] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.458194] pci 0000:00:1a.0: reg 10: [mem 0xf1005800-0xf1005bff]
    [ 0.458289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.458318] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.458335] pci 0000:00:1b.0: reg 10: [mem 0xf1000000-0xf1003fff 64bit]
    [ 0.458409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.458432] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.458508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.458533] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 0.458609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.458635] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
    [ 0.458710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.458735] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.458810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.458835] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
    [ 0.458911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.458943] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.458965] pci 0000:00:1d.0: reg 10: [mem 0xf1005c00-0xf1005fff]
    [ 0.459066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.459092] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.459161] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
    [ 0.459292] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.459313] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
    [ 0.459322] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
    [ 0.459331] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
    [ 0.459340] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
    [ 0.459350] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
    [ 0.459359] pci 0000:00:1f.2: reg 24: [mem 0xf1005000-0xf10057ff]
    [ 0.459410] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.459430] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.459446] pci 0000:00:1f.3: reg 10: [mem 0xf1006000-0xf10060ff 64bit]
    [ 0.459469] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
    [ 0.459533] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
    [ 0.459547] pci 0000:02:00.0: [1002:9488] type 00 class 0x030000
    [ 0.459559] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.459568] pci 0000:02:00.0: reg 14: [io 0x2000-0x20ff]
    [ 0.459577] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
    [ 0.459605] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.459642] pci 0000:02:00.0: supports D1 D2
    [ 0.459664] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
    [ 0.459676] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
    [ 0.459749] pci 0000:02:00.1: supports D1 D2
    [ 0.469037] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.469045] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.469052] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.469061] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.469117] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-fe]
    [ 0.469121] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.469126] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.469130] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.469137] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.469179] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-fe]
    [ 0.469247] pci 0000:05:00.0: [8086:4235] type 00 class 0x028000
    [ 0.469385] pci 0000:05:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]
    [ 0.470080] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.470313] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.470317] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.470322] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.470329] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.470371] pci_bus 0000:07: busn_res: [bus 07-08] is inserted under [bus 00-fe]
    [ 0.470375] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.470380] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.470384] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.470391] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.470433] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-fe]
    [ 0.470458] pci 0000:09:00.0: [1180:e822] type 00 class 0x080500
    [ 0.470478] pci 0000:09:00.0: reg 10: [mem 0xf0b00000-0xf0b000ff]
    [ 0.470612] pci 0000:09:00.0: supports D1 D2
    [ 0.470614] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470664] pci 0000:09:00.1: [1180:e230] type 00 class 0x088000
    [ 0.470683] pci 0000:09:00.1: reg 10: [mem 0xf0c00800-0xf0c008ff]
    [ 0.470817] pci 0000:09:00.1: supports D1 D2
    [ 0.470819] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470862] pci 0000:09:00.2: [1180:e852] type 00 class 0x088000
    [ 0.470882] pci 0000:09:00.2: reg 10: [mem 0xf0c00c00-0xf0c00cff]
    [ 0.471016] pci 0000:09:00.2: supports D1 D2
    [ 0.471018] pci 0000:09:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.471061] pci 0000:09:00.3: [1180:e832] type 00 class 0x0c0010
    [ 0.471080] pci 0000:09:00.3: reg 10: [mem 0xf0c00000-0xf0c007ff]
    [ 0.471214] pci 0000:09:00.3: supports D1 D2
    [ 0.471216] pci 0000:09:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.479052] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.479060] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.479067] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.479077] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.479131] pci_bus 0000:0b: busn_res: [bus 0b] is inserted under [bus 00-fe]
    [ 0.479319] pci 0000:0b:00.0: [14e4:1698] type 00 class 0x020000
    [ 0.479351] pci 0000:0b:00.0: reg 10: [mem 0xf0d00000-0xf0d0ffff 64bit]
    [ 0.479523] pci 0000:0b:00.0: PME# supported from D3hot D3cold
    [ 0.479582] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.479589] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.479616] pci_bus 0000:0c: busn_res: [bus 0c] is inserted under [bus 00-fe]
    [ 0.479664] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
    [ 0.479675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.479677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.479680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.479682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.479685] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.479687] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.479690] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
    [ 0.479692] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.479724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.479928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.479968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.480099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.480160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.480223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.480283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.480343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.480435] \_SB_.PCI0:_OSC invalid UUID
    [ 0.480437] _OSC request data:1 1f 1f
    [ 0.480441] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.480443] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.487467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 0.487507] PCI host bridge to bus 0000:ff
    [ 0.487511] pci_bus 0000:ff: busn_res: [bus ff] is inserted under domain [bus 00-ff]
    [ 0.487513] pci_bus 0000:ff: root bus resource [bus ff]
    [ 0.487521] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
    [ 0.487545] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
    [ 0.487572] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
    [ 0.487594] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
    [ 0.487622] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
    [ 0.487644] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
    [ 0.487667] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
    [ 0.487691] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
    [ 0.487714] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
    [ 0.487736] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
    [ 0.487758] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
    [ 0.487783] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
    [ 0.487807] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
    [ 0.487829] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
    [ 0.487852] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
    [ 0.487895] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.487897] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.488488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.488544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488601] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.488655] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.488765] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.488819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.488871] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.488974] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.488983] vgaarb: loaded
    [ 0.488985] vgaarb: bridge control possible 0000:02:00.0
    [ 0.489035] PCI: Using ACPI for IRQ routing
    [ 0.495825] PCI: pci_cache_line_size set to 64 bytes
    [ 0.496142] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
    [ 0.496144] e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
    [ 0.496149] e820: reserve RAM buffer [mem 0xc73ec000-0xc7ffffff]
    [ 0.496152] e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
    [ 0.496156] e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
    [ 0.496159] e820: reserve RAM buffer [mem 0xc7771000-0xc7ffffff]
    [ 0.496161] e820: reserve RAM buffer [mem 0xc77e2000-0xc7ffffff]
    [ 0.496163] e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
    [ 0.496267] NetLabel: Initializing
    [ 0.496269] NetLabel: domain hash size = 128
    [ 0.496270] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.496283] NetLabel: unlabeled traffic allowed by default
    [ 0.496337] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [ 0.496344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
    [ 0.496351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.499146] hpet: hpet2 irq 40 for MSI
    [ 0.502434] hpet: hpet3 irq 41 for MSI
    [ 0.505694] hpet: hpet4 irq 42 for MSI
    [ 0.505793] hpet: hpet5 irq 43 for MSI
    [ 0.509214] hpet: hpet6 irq 44 for MSI
    [ 0.522618] Switching to clocksource hpet
    [ 0.529334] pnp: PnP ACPI init
    [ 0.529354] ACPI: bus type pnp registered
    [ 0.529782] pnp 00:00: [bus 00-fe]
    [ 0.529786] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.529789] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.529791] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.529794] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.529796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.529799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.529801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.529803] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.529806] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.529808] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.529811] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.529813] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.529815] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.529820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.529822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.529825] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.529827] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.529829] pnp 00:00: [mem 0xc8000000-0xdfffffff window]
    [ 0.529832] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.529834] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.529903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.529952] pnp 00:01: [io 0x0000-0x001f]
    [ 0.529954] pnp 00:01: [io 0x0081-0x0091]
    [ 0.529957] pnp 00:01: [io 0x0093-0x009f]
    [ 0.529959] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.529961] pnp 00:01: [dma 4]
    [ 0.529991] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.530001] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.530030] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.530116] pnp 00:03: [irq 0 disabled]
    [ 0.530125] pnp 00:03: [irq 8]
    [ 0.530128] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.530162] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.530174] pnp 00:04: [io 0x00f0]
    [ 0.530181] pnp 00:04: [irq 13]
    [ 0.530207] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.530221] pnp 00:05: [io 0x002e-0x002f]
    [ 0.530223] pnp 00:05: [io 0x004e-0x004f]
    [ 0.530225] pnp 00:05: [io 0x0061]
    [ 0.530227] pnp 00:05: [io 0x0063]
    [ 0.530229] pnp 00:05: [io 0x0065]
    [ 0.530231] pnp 00:05: [io 0x0067]
    [ 0.530234] pnp 00:05: [io 0x0068]
    [ 0.530236] pnp 00:05: [io 0x006c]
    [ 0.530238] pnp 00:05: [io 0x0070]
    [ 0.530240] pnp 00:05: [io 0x0080]
    [ 0.530242] pnp 00:05: [io 0x0092]
    [ 0.530244] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.530246] pnp 00:05: [io 0x0680-0x069f]
    [ 0.530249] pnp 00:05: [io 0x0500-0x050f]
    [ 0.530251] pnp 00:05: [io 0xffff]
    [ 0.530253] pnp 00:05: [io 0xffff]
    [ 0.530255] pnp 00:05: [io 0x0400-0x047f]
    [ 0.530257] pnp 00:05: [io 0x1180-0x11ff]
    [ 0.530259] pnp 00:05: [io 0x164e-0x164f]
    [ 0.530262] pnp 00:05: [io 0xfe00]
    [ 0.530330] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.530333] system 00:05: [io 0x0500-0x050f] has been reserved
    [ 0.530336] system 00:05: [io 0xffff] has been reserved
    [ 0.530339] system 00:05: [io 0xffff] has been reserved
    [ 0.530342] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.530345] system 00:05: [io 0x1180-0x11ff] has been reserved
    [ 0.530347] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.530352] system 00:05: [io 0xfe00] has been reserved
    [ 0.530356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.530374] pnp 00:06: [io 0x0300-0x0307]
    [ 0.530381] pnp 00:06: [irq 10]
    [ 0.530410] pnp 00:06: Plug and Play ACPI device, IDs ITE8708 (active)
    [ 0.530445] pnp 00:07: [io 0x0070-0x0077]
    [ 0.530476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.530488] pnp 00:08: [io 0x0060]
    [ 0.530492] pnp 00:08: [io 0x0064]
    [ 0.530499] pnp 00:08: [irq 1]
    [ 0.530526] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.530539] pnp 00:09: [irq 12]
    [ 0.530569] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.530934] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.530937] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530940] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
    [ 0.530942] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530944] pnp 00:0a: [mem 0xe0000000-0xefffffff]
    [ 0.530947] pnp 00:0a: [mem 0xf1004000-0xf1004fff]
    [ 0.530949] pnp 00:0a: [mem 0xc8000000-0xc8000fff]
    [ 0.530951] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.530954] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
    [ 0.530956] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
    [ 0.530958] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 0.530960] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.530963] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.531049] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.531052] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 0.531055] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.531058] system 00:0a: [mem 0xf1004000-0xf1004fff] has been reserved
    [ 0.531061] system 00:0a: [mem 0xc8000000-0xc8000fff] has been reserved
    [ 0.531064] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.531067] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.531070] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.531072] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.531075] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.531080] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.532133] pnp 00:0b: [bus ff]
    [ 0.532197] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.532211] pnp: PnP ACPI: found 12 devices
    [ 0.532212] ACPI: ACPI bus type pnp unregistered
    [ 0.539150] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
    [ 0.539155] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
    [ 0.539169] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.539172] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.539178] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539182] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.539186] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
    [ 0.539190] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.539193] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.539198] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.539202] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539207] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.539211] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.539217] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.539221] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539228] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.539232] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.539237] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.539241] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539248] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.539252] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.539257] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.539262] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539269] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.539273] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.539278] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.539283] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539290] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.539293] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff]
    [ 0.539299] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.539304] pci 0000:00:1c.5: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539310] pci 0000:00:1e.0: PCI bridge to [bus 0c]
    [ 0.539366] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.539371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.539373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.539376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539378] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539381] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539383] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539385] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539398] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539401] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.539403] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
    [ 0.539406] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539408] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.539411] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
    [ 0.539413] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539416] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
    [ 0.539418] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
    [ 0.539420] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539423] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
    [ 0.539425] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]
    [ 0.539428] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539430] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
    [ 0.539433] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0cfffff]
    [ 0.539435] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539438] pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
    [ 0.539440] pci_bus 0000:0b: resource 1 [mem 0xf0d00000-0xf0dfffff]
    [ 0.539443] pci_bus 0000:0b: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539445] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
    [ 0.539448] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
    [ 0.539450] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539452] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539455] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539457] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539460] pci_bus 0000:0c: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539462] pci_bus 0000:0c: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539501] NET: Registered protocol family 2
    [ 0.540223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.543745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.544173] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.544194] TCP: reno registered
    [ 0.544208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544300] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544454] NET: Registered protocol family 1
    [ 0.544593] pci 0000:02:00.0: Boot video device
    [ 0.544817] PCI: CLS 64 bytes, default 64
    [ 0.544861] Unpacking initramfs...
    [ 0.665886] Freeing initrd memory: 4640k freed
    [ 0.666611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.666615] software IO TLB [mem 0xc327c000-0xc727bfff] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
    [ 0.666654] Simple Boot Flag at 0x36 set to 0x80
    [ 0.667182] audit: initializing netlink socket (disabled)
    [ 0.667193] type=2000 audit(1352749565.703:1): initialized
    [ 0.683027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.685360] VFS: Disk quotas dquot_6.5.2
    [ 0.685417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.685575] msgmni has been set to 15952
    [ 0.685799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.685830] io scheduler noop registered
    [ 0.685832] io scheduler deadline registered
    [ 0.685897] io scheduler cfq registered (default)
    [ 0.686337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [ 0.686339] vesafb: scrolling: redraw
    [ 0.686342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.687265] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
    [ 0.886729] Console: switching to colour frame buffer device 160x64
    [ 1.086123] fb0: VESA VGA frame buffer device
    [ 1.086134] intel_idle: MWAIT substates: 0x1120
    [ 1.086145] intel_idle: v0.4 model 0x1E
    [ 1.086146] intel_idle: lapic_timer_reliable_states 0x2
    [ 1.086221] GHES: HEST is not enabled!
    [ 1.086283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.086787] Linux agpgart interface v0.103
    [ 1.086895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.097204] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.097237] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.097348] mousedev: PS/2 mouse device common for all mice
    [ 1.097573] rtc_cmos 00:07: RTC can wake from S4
    [ 1.097893] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.097920] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.098264] cpuidle: using governor ladder
    [ 1.098473] cpuidle: using governor menu
    [ 1.098603] drop_monitor: Initializing network drop monitor service
    [ 1.098697] TCP: cubic registered
    [ 1.098819] NET: Registered protocol family 10
    [ 1.099011] NET: Registered protocol family 17
    [ 1.099028] Key type dns_resolver registered
    [ 1.099438] PM: Hibernation image not present or could not be loaded.
    [ 1.099447] registered taskstats version 1
    [ 1.101811] rtc_cmos 00:07: setting system clock to 2012-11-12 19:46:05 UTC (1352749565)
    [ 1.103851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106355] Freeing unused kernel memory: 768k freed
    [ 1.106522] Write protecting the kernel read-only data: 8192k
    [ 1.116385] Freeing unused kernel memory: 1408k freed
    [ 1.117994] Freeing unused kernel memory: 568k freed
    [ 1.134497] systemd-udevd[78]: starting version 195
    [ 1.180869] ACPI: bus type usb registered
    [ 1.180984] usbcore: registered new interface driver usbfs
    [ 1.181051] usbcore: registered new interface driver hub
    [ 1.181311] usbcore: registered new device driver usb
    [ 1.182950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.183127] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.183132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.183234] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.187253] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.187271] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.187303] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
    [ 1.187791] SCSI subsystem initialized
    [ 1.189604] ACPI: bus type scsi registered
    [ 1.189681] libata version 3.00 loaded.
    [ 1.195488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.195917] hub 1-0:1.0: USB hub found
    [ 1.195922] hub 1-0:1.0: 3 ports detected
    [ 1.196087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.196092] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.196163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.200176] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.200188] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.200205] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
    [ 1.208814] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.209225] hub 2-0:1.0: USB hub found
    [ 1.209230] hub 2-0:1.0: 3 ports detected
    [ 1.209367] ahci 0000:00:1f.2: version 3.0
    [ 1.209430] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 1.209548] ahci: SSS flag set, parallel bus scan disabled
    [ 1.209587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
    [ 1.209592] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.209597] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.223416] scsi0 : ahci
    [ 1.223797] scsi1 : ahci
    [ 1.224147] scsi2 : ahci
    [ 1.224500] scsi3 : ahci
    [ 1.224856] scsi4 : ahci
    [ 1.225221] scsi5 : ahci
    [ 1.225356] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
    [ 1.225362] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
    [ 1.225365] ata3: DUMMY
    [ 1.225367] ata4: DUMMY
    [ 1.225369] ata5: DUMMY
    [ 1.225373] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
    [ 1.501934] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.545247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.547533] ata1.00: ATA-8: WDC WD6400BEVT-75A0RT0, 01.01A01, max UDMA/133
    [ 1.547540] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.549967] ata1.00: configured for UDMA/133
    [ 1.550374] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-7 01.0 PQ: 0 ANSI: 5
    [ 1.626090] hub 1-1:1.0: USB hub found
    [ 1.626247] hub 1-1:1.0: 6 ports detected
    [ 1.668452] tsc: Refined TSC clocksource calibration: 1595.999 MHz
    [ 1.668460] Switching to clocksource tsc
    [ 1.731725] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.856178] hub 2-1:1.0: USB hub found
    [ 1.856346] hub 2-1:1.0: 8 ports detected
    [ 1.868319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.880979] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
    [ 1.880987] ata2.00: applying bridge limits
    [ 1.894279] ata2.00: configured for UDMA/100
    [ 1.895297] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
    [ 1.924926] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
    [ 2.188109] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
    [ 2.214657] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.220297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    [ 2.220394] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.220398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.220436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.264902] sda: sda1 sda2
    [ 2.266126] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.286592] usbcore: registered new interface driver usbhid
    [ 2.286606] usbhid: USB HID core driver
    [ 2.287736] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
    [ 2.288087] hid-generic 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 2.344526] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
    [ 2.415244] device-mapper: uevent: version 1.0.3
    [ 2.415448] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 2.430414] hub 2-1.2:1.0: USB hub found
    [ 2.430750] hub 2-1.2:1.0: 4 ports detected
    [ 2.497819] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
    [ 2.583779] hub 2-1.6:1.0: USB hub found
    [ 2.583940] hub 2-1.6:1.0: 3 ports detected
    [ 2.697722] usb 2-1.2.1: new high-speed USB device number 6 using ehci_hcd
    [ 2.850856] usb 2-1.6.1: new full-speed USB device number 7 using ehci_hcd
    [ 2.939323] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input2
    [ 2.939498] hid-generic 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.6.1/input0
    [ 3.004105] usb 2-1.6.2: new full-speed USB device number 8 using ehci_hcd
    [ 3.094077] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
    [ 3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
    [ 824.543880] Btrfs loaded
    [ 824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
    [ 824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
    [ 825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot
    [ 825.228574] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.236250] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.497003] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 826.881639] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 826.913723] systemd[1]: Set hostname to <clawfinger>.
    [ 829.535709] systemd[1]: Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory. See system logs and 'systemctl status lvm.service' for details.
    [ 829.535737] systemd[1]: Cannot add dependency job for unit cpufreq.service, ignoring: Unit cpufreq.service failed to load: No such file or directory. See system logs and 'systemctl status cpufreq.service' for details.
    [ 829.535752] systemd[1]: Cannot add dependency job for unit zeitgeist-daemon.service, ignoring: Unit zeitgeist-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status zeitgeist-daemon.service' for details.
    [ 829.535786] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
    [ 829.535834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 829.535861] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status console-kit-daemon.service' for details.
    [ 829.536380] systemd[1]: Starting Replay Read-Ahead Data...
    [ 829.554901] systemd[1]: Starting Collect Read-Ahead Data...
    [ 829.571226] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 829.571303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 829.571319] systemd[1]: Starting Login Prompts.
    [ 829.571328] systemd[1]: Reached target Login Prompts.
    [ 829.571337] systemd[1]: Starting Remote File Systems.
    [ 829.571345] systemd[1]: Reached target Remote File Systems.
    [ 829.571354] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
    [ 829.571362] systemd[1]: Starting Syslog Socket.
    [ 829.571364] systemd[1]: Socket service syslog.service not loaded, refusing.
    [ 829.572842] systemd[1]: Failed to listen on Syslog Socket.
    [ 829.574007] systemd[1]: Starting Arch Daemons.
    [ 829.574014] systemd[1]: Reached target Arch Daemons.
    [ 829.574023] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 829.574048] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 829.574055] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 829.574075] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 829.574081] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 829.574098] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 829.574106] systemd[1]: Starting Delayed Shutdown Socket.
    [ 829.574129] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 829.574218] systemd[1]: Starting udev Kernel Socket.
    [ 829.574239] systemd[1]: Listening on udev Kernel Socket.
    [ 829.574284] systemd[1]: Starting udev Control Socket.
    [ 829.574307] systemd[1]: Listening on udev Control Socket.
    [ 829.574332] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 829.574407] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 829.574419] systemd[1]: Starting Encrypted Volumes.
    [ 829.574426] systemd[1]: Reached target Encrypted Volumes.
    [ 829.574436] systemd[1]: Expecting device dev-disk-by\x2duuid-bb356f76\x2dd262\x2d43ca\x2da705\x2da2eab4b6d6ba.device...
    [ 829.574445] systemd[1]: Expecting device dev-disk-by\x2duuid-2796b7f1\x2d10c6\x2d481b\x2d91cb\x2d07cb7110031c.device...
    [ 829.574455] systemd[1]: Expecting device dev-disk-by\x2duuid-d169a015\x2d6ef6\x2d47f5\x2da6b2\x2d3db25ecce4a2.device...
    [ 829.574467] systemd[1]: Starting Journal Socket.
    [ 829.574507] systemd[1]: Listening on Journal Socket.
    [ 829.574529] systemd[1]: Mounting Huge Pages File System...
    [ 829.577956] systemd[1]: Mounting POSIX Message Queue File System...
    [ 829.591510] systemd[1]: Starting udev Coldplug all Devices...
    [ 829.594776] systemd[1]: Mounting Debug File System...
    [ 829.611201] systemd[1]: Starting udev Kernel Device Manager...
    [ 829.614769] systemd[1]: Starting Journal Service...
    [ 829.647758] systemd[1]: Started Journal Service.
    [ 829.647819] systemd[1]: Starting Syslog.
    [ 829.647843] systemd[1]: Reached target Syslog.
    [ 829.647879] systemd[1]: Starting home.automount.
    [ 829.901808] systemd[1]: Set up automount home.automount.
    [ 830.553864] systemd-udevd[249]: starting version 195
    [ 831.070954] ACPI: Requesting acpi_cpufreq
    [ 831.456015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 831.456019] ACPI: Power Button [PWRB]
    [ 831.456058] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    [ 831.456060] ACPI: Sleep Button [SLPB]
    [ 831.456097] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [ 831.457156] ACPI: Lid Switch [LID0]
    [ 831.457203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 831.457206] ACPI: Power Button [PWRF]
    [ 831.457547] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 831.457548] AMD IOMMUv2 functionality not available on this system
    [ 831.615332] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 831.615336] Disabling lock debugging due to kernel taint
    [ 831.619625] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
    [ 831.619972] <6>[fglrx] vendor: 1002 device: 9488 count: 1
    [ 831.620506] <6>[fglrx] ioport: bar 1, base 0x2000, size: 0x100
    [ 831.620722] <6>[fglrx] Kernel PAT support is enabled
    [ 831.620735] <6>[fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 1 minors
    [ 831.621578] ACPI: Fan [FAN0] (off)
    [ 831.621623] ACPI: Fan [FAN1] (off)
    [ 831.631874] vboxdrv: Found 8 processor cores.
    [ 831.633478] vboxdrv: fAsync=0 offMin=0x19b offMax=0x1b771
    [ 831.633549] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 831.633550] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
    [ 832.286066] ACPI: AC Adapter [ADP1] (on-line)
    [ 832.312526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 832.315135] acpi device:03: registered as cooling_device10
    [ 832.315214] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
    [ 832.315347] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
    [ 832.409308] thermal LNXTHERM:00: registered as thermal_zone0
    [ 832.409312] ACPI: Thermal Zone [TZ00] (27 C)
    [ 832.421895] ACPI: Battery Slot [BAT0] (battery present)
    [ 832.422793] thermal LNXTHERM:01: registered as thermal_zone1
    [ 832.422797] ACPI: Thermal Zone [TZ01] (69 C)
    [ 832.590092] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
    [ 832.970363] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 833.240290] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.240762] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241329] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241760] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242173] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242608] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243025] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243492] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 833.265118] wmi: Mapper loaded
    [ 833.267255] sdhci: Secure Digital Host Controller Interface driver
    [ 833.267258] sdhci: Copyright(c) Pierre Ossman
    [ 833.268312] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 833.268319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268323] ACPI Warning: 0x0000000000001180-0x00000000000011ff SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 833.268327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268329] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 833.512963] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
    [ 833.513049] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 833.513095] Registered led device: mmc0::
    [ 833.537204] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
    [ 833.570607] input: Dell WMI hotkeys as /devices/virtual/input/input10
    [ 833.847354] EDAC MC: Ver: 3.0.0
    [ 833.930269] firewire_ohci 0000:09:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    [ 834.096451] ite_cir: Auto-detected model: ITE8708 CIR transceiver
    [ 834.096454] ite_cir: Using model: ITE8708 CIR transceiver
    [ 834.096455] ite_cir: TX-capable: 1
    [ 834.096456] ite_cir: Sample period (ns): 8680
    [ 834.096457] ite_cir: TX carrier frequency (Hz): 38000
    [ 834.096458] ite_cir: TX duty cycle (%): 33
    [ 834.096459] ite_cir: RX low carrier frequency (Hz): 0
    [ 834.096460] ite_cir: RX high carrier frequency (Hz): 0
    [ 834.275945] iTCO_vendor_support: vendor-support=0
    [ 834.294684] cfg80211: Calling CRDA to update world regulatory domain
    [ 834.301218] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 834.430008] firewire_core 0000:09:00.3: created device fw0: GUID 324fc0001978e281, S400
    [ 834.433957] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 834.433962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 834.446316] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
    [ 834.977790] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 834.977796] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 834.978266] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 835.102238] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 835.137263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
    [ 835.147237] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 835.147687] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
    [ 835.147810] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
    [ 835.152252] Registered IR keymap rc-rc6-mce
    [ 835.152388] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input13
    [ 835.152451] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
    [ 835.152504] ite_cir: driver has been successfully l

    My disk seems also fine
    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Scorpio Blue Serial ATA
    Device Model: WDC WD6400BEVT-75A0RT0
    Serial Number: WD-WX91C8077575
    LU WWN Device Id: 5 0014ee 600865d25
    Firmware Version: 01.01A01
    User Capacity: 640,135,028,736 bytes [640 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: 5400 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 2.6, 3.0 Gb/s
    Local Time is: Thu Dec 20 21:36:56 2012 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 248) Self-test routine in progress...
    80% of test remaining.
    Total time to complete Offline
    data collection: (16380) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 190) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x7037) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 184 181 021 Pre-fail Always - 1775
    4 Start_Stop_Count 0x0032 079 079 000 Old_age Always - 21418
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4329
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1828
    191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 2336
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 512
    193 Load_Cycle_Count 0x0032 161 161 000 Old_age Always - 119448
    194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 41
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
    240 Head_Flying_Hours 0x0032 095 095 000 Old_age Always - 4000
    241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 13521667898
    242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 14814445183
    254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Interrupted (host reset) 90% 4329 -
    # 2 Extended offline Completed without error 00% 4329 -
    # 3 Short offline Completed without error 00% 0 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

Maybe you are looking for

  • Itunes won't open since tiger installation

    Installed Tiger 10.4.6 disc yesterday opened itunes and it said I needed 10.4.11 updated to 10.4.11 now itunes (7.6) will not start and does not give an error message at all Have tried, -opening from another user: no luck -deleting com.apple.iTunes.e

  • Maximum number os users in a group

    What is the maximum number of users that can be in a group on OS X server 10.4? IN 10.3 I think it was 10,000 I ask, because I am integrating with an AD server, where the group we are trying to manage preferences on is 28,000>

  • Remove partition key from partitoned table

    can somebody help me with a sql syntax to remove a partition key from a partiton table . The scenario is explained as follows: create table t1 (c1 number, c2 number ,c3 number) partition by range (c1, c2) (partition p1 values less than 11, partition

  • DNS lookups to VPN hijacked by WRVS4400N (fw v1.1.13)?

    I have a WRVS4400N on the latest firmware offered by Cisco.  After a whole run of problems with previous firmware, this one seems to be almost perfect except for this odd issue I've been encountering now (that I hadn't encountered on previous firmwar

  • Targeting a specific Spry tab in an A Href

    Can i somehow tell the Spry tabs to focus on a tab other than the first one on page load?