[Solved] Unable to start Apache

Hi All,
I install Apache with "sudo pacman -S apache"but "sudo systemctl start httpd.service" failed and "sudo systemctl status httpd.service" showed:
httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled)
Active: failed (Result: exit-code) since Sun, 2012-12-16 03:36:39 EST; 7s ago
Process: 4844 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/httpd.service
Dec 16 03:36:39 ArchCustom apachectl[4844]: httpd: apr_sockaddr_info_get() failed for ArchCustom
Dec 16 03:36:39 ArchCustom apachectl[4844]: httpd: Could not reliably determine the server's fully qualified domain name, u...erName
Dec 16 03:36:39 ArchCustom systemd[1]: Failed to start Apache Web Server.
Dec 16 03:36:39 ArchCustom systemd[1]: Unit httpd.service entered failed state
Warning: Unit file changed on disk, 'systemctl --system daemon-reload' recommended.
Then I went to /etc/httpd/conf/httpd.conf and changed "#ServerName www.example.com:80" to "ServerName 192.168.4.19:80" (later I changed to "ServerName localhost:80", but it didn't work either). Now the systemctl status showed:
httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled)
Active: failed (Result: exit-code) since Sun, 2012-12-16 03:39:50 EST; 3s ago
Process: 4863 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/httpd.service
Dec 16 03:39:50 ArchCustom systemd[1]: Failed to start Apache Web Server.
Dec 16 03:39:50 ArchCustom systemd[1]: Unit httpd.service entered failed state
What should I do next?
Thanks.
Last edited by dxxvi (2012-12-20 11:48:20)

zenlord wrote:Read the wiki: https://wiki.archlinux.org/index.php/Apache
This is the easiest answer to give for my question "What should I do next?" Yes, I already read the wiki. Apache run successfully without any modification 3 - 4 times for me in the past. Now I install a new machine and it doesn't work this time.
kaipee wrote:@dxxvi I have also been having issues with apache since I moved to systemd at the weekend.
Fortunately for me I installed my machine when systemd was already there. This is my /usr/lib/systemd/system/httpd.service
[Unit]
Description=Apache Web Server
After=network.target remote-fs.target nss-lookup.target
[Service]
Type=forking
PIDFile=/run/httpd/httpd.pid
ExecStart=/usr/sbin/apachectl start
ExecStop=/usr/sbin/apachectl graceful-stop
ExecReload=/usr/sbin/apachectl graceful
PrivateTmp=true
LimitNOFILE=infinity
[Install]
WantedBy=multi-user.target
and in my system /var/run is sym-linked to /run. And by the way, why is the location for the pid file important? I think we can put the pid file anywhere, right?
/usr/sbin/apachectl configtest says my httpd.conf is fine. However /usr/sbin/apachectl start exits with the status of 1.

Similar Messages

  • Unable to start apache in oracle apps r12

    hi,
    we are unable to start Apache in one of our test instance.
    in Error log..
    /home/mnt/ebs/PRJ/app/inst/apps/PRJ_rempapp/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd
    Error: Failed to open the wallet [Hint: incorrect path, incorrect password, bad wallet, ...] (Server rempapp.powerdesigninc.us:80, wallet file:/home/mnt/ebs/PRJ/app/inst/apps/PRJ_rempapp/certs/Apache)
    recent changes: applied patch  19905922:R12.PO.B.
    Referred:Oracle HTTP Server does not Start with AutoLogin Wallet (Doc ID 386314.1)
    please help..
    Thanks
    Raghavendra

    Hi
    Please refer the below links,
    Httpserver not starting, help!
    HTTP_Server when starting OPMN.
    Regards,
    krish

  • Unable to start Apache

    Hello
    When i start the apachectl start, The following error was encounted and unbale to start apache.
    [Tue Jul 10 09:30:17 2001] [alert] mod_unique_id: unable to gethostbyname("mobil
    e4")
    Regards
    Michael

    Is it in the DNS? If not, add it to your hosts...
    null

  • [SOLVED] can't start apache ¿because owncloud logfile doesn't exist?

    I've just installed MariaDB, PHP, mysql and owncloud, but since I installed this last one I can't run httpd. This is the error:
    $ systemctl status -l httpd
    ● httpd.service - Apache Web Server
       Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
       Active: failed (Result: exit-code) since jue 2014-05-22 10:43:38 ART; 6min ago
      Process: 5166 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
    may 22 10:43:37 archserv systemd[1]: Starting Apache Web Server...
    may 22 10:43:38 archserv apachectl[5166]: (2)No such file or directory: AH02291: Cannot access directory '/etc/httpd/logs/' for error log of vhost defined at /etc/httpd/conf/extra/owncloud.conf:11
    may 22 10:43:38 archserv apachectl[5166]: AH00014: Configuration check failed
    may 22 10:43:38 archserv systemd[1]: httpd.service: control process exited, code=exited status=1
    may 22 10:43:38 archserv systemd[1]: Failed to start Apache Web Server.
    may 22 10:43:38 archserv systemd[1]: Unit httpd.service entered failed state.
    And
    $ nano /etc/httpd/conf/extra/owncloud.conf
    <IfModule mod_alias.c>
    Alias /owncloud /usr/share/webapps/owncloud/
    </IfModule>
    <Directory /usr/share/webapps/owncloud/>
       Options FollowSymlinks
       Order allow,deny
       AllowOverride all
       allow from all
       php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud/:/etc/webapps/owncloud"
    </Directory>
    <VirtualHost *:80>
        ServerAdmin [email protected]
        DocumentRoot /usr/share/webapps/owncloud
        ServerName owncloud.foo.com
        ErrorLog logs/owncloud.foo.info-error_log
        CustomLog logs/owncloud.foo.info-access_log common
    </VirtualHost>
    It seems simple, but I can't understand it. What am I missing?
    Thank you all.
    Last edited by persio (2014-05-22 14:19:14)

    Instead I suggest to change Log directories to  /var/log/httpd/
        ErrorLog /var/log/httpd/owncloud.foo.info-error_log
        CustomLog /var/log/httpd/owncloud.foo.info-access_log common

  • [SOLVED] Unable to start vmware 9 after update

    Hello Folks,
    I got one weird issue after update,
    I tried to start vmware, failed as nothing happeded, no error message shown.
    Do you have any clues ?
    ┌─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# uname -a
    Linux tp 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64 GNU/Linux
    ┌─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware-modconfig --console --install-all
    Stopping VMware services:
       VMware Authentication Daemon                                        done
       VM communication interface socket family                            done
       Virtual machine communication interface                             done
       Virtual machine monitor                                             done
       Blocking file system                                                done
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/hostif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/memtrack.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/driverLog.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/apic.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/vmx86.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/cpuid.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/task.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/hashFunc.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/comport.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/phystrack.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmcore/moduleloop.o
      LD [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmmon.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmmon-only/vmmon.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmmon.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
    cp -f vmmon.ko ./../vmmon.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/hub.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/netif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/userif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/bridge.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/filter.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/procfs.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/smac_compat.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/smac.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/vnetEvent.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/vnetUserListener.o
      LD [M]  /tmp/modconfig-CEZuvv/vmnet-only/vmnet.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmnet-only/vmnet.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmnet-only/vmnet.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
    cp -f vmnet.ko ./../vmnet.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/filesystem.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/file.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/stubs.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/block.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/module.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/control.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/super.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.o
    /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: initialization from incompatible pointer type [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: (near initialization for ‘RootInodeOps.lookup’) [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: initialization from incompatible pointer type [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: (near initialization for ‘LinkDentryOps.d_revalidate’) [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c: In function ‘DentryOpRevalidate’:
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: warning: passing argument 2 of ‘actualDentry->d_op->d_revalidate’ makes integer from pointer without a cast [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: note: expected ‘unsigned int’ but argument is of type ‘struct nameidata *’
      LD [M]  /tmp/modconfig-CEZuvv/vmblock-only/vmblock.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmblock-only/vmblock.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmblock-only/vmblock.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
    cp -f vmblock.ko ./../vmblock.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/linux/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/linux/vmciKernelIf.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDriver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDatagram.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciResource.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciRoute.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciContext.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciHashtable.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciEvent.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciQueuePair.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciQPair.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDoorbell.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/driverLog.o
      LD [M]  /tmp/modconfig-CEZuvv/vmci-only/vmci.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmci-only/vmci.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmci-only/vmci.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
    cp -f vmci.ko ./../vmci.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/af_vsock.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/vsockAddr.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/notifyQState.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/util.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/stats.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/notify.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/driverLog.o
      LD [M]  /tmp/modconfig-CEZuvv/vsock-only/vsock.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vsock-only/vsock.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vsock-only/vsock.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
    cp -f vsock.ko ./../vsock.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
    Starting VMware services:
       Virtual machine monitor                                             done
       Virtual machine communication interface                             done
       VM communication interface socket family                            done
       Blocking file system                                                done
       Virtual ethernet                                                   failed
       VMware Authentication Daemon                                        done
    Unable to start services
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─#
    Thanks in advance,
    Liao
    Last edited by liao (2013-01-11 14:10:29)

    after check vmware message under /tmp/vmware-$USER/vmware*.log, found one package is missing - libpng12, after installed it, everything looks good again

  • Unable to start Apache server

    Hai,
    I am using WindowsNT. When i tried to create an item of image type Dr.Watson error appeared showing that an error has appeared on the Apache server. After that i couldn't start the server. When i tried to start the server on the command line it said some files are missing which are mention in the htpd.conf file. The irony is those files are present in the system. I don't know wether it could be because of PATH settings. I haven't altered the default path settings which included the directory for Apache server.
    regards,
    Mathan

    A handy (and free) tool for checking out these kinds of errors is filemon, available at www.sysinternals.com

  • [solved] Unable to start x, gma500.

    Hello arch users.
    This might be a wall with text...
    Today i instaled arch for the first time, and on an SD card sitting inside a 1101ha.
    The excelent ARCH wiki guided me with perfection towards my goals up to one problem where i had to zero byte
    the SD card using dd because somehow 'overlapping' partition tables kept bugging me out and cfdisk did not solve it for
    one second. All things well, it got installed with practical ease (ty arch wiki manual).
    After all that i install the x server acording to the wiki, slim, and openbox. But to my horror X fails with error(1) and
    Xorg -configure ends with error(2). After diving into the wiki, googling, reading the forum topics concerning x
    errors i end up with confusion. the wiki claims modern X configures itself so i went with it.
    -> everything got pulled in by pacman.
    -> # lsmod | grep gma    ;  shows exactly what it should and as seen in the wiki.
    -> xorg log as root directly after booting contains  as last lines ;
    (II) systemd-logind: took controll of session /org/freedesktop/login1/session/c2
    (II) xfree86: adding drm device (/dev/dri/card0)
    (II) systemd-logind: got fd for /devdri/card0 226:0 fd 10 paused 0
    (--) PCI:*(0:0:2:0) 8086:8108:1043:83ce rev 7, mem @ 0xf3f80000/524288, 0xd00000000/268435456,0xf3f40000/262144, I/O @ 0x0000d880/8
    missing output drivers. configuration failed.
    Does the use of the kernel based gma500 driver need more then autoconfiguring or did i obliviously miss a giant configuration
    that needs to be added. no matter how much i read the wiki at this point, i just do not see it anymore....
    Appended ; I still had to copy this to an usb to get it to the forum.
    This is the Xorg log created after attempting to run x by means of startx, as mentioned above i went with the defaults and
    auto configuration, while using the gma500 kernel driver. this is probably a more useful dump of a log then the few lines
    from straight after booting.
    [ 264.543]
    X.Org X Server 1.16.0
    Release Date: 2014-07-16
    [ 264.544] X Protocol Version 11, Revision 0
    [ 264.544] Build Operating System: Linux 3.15.5-2-ARCH i686
    [ 264.544] Current Operating System: Linux arch 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 22:00:02 CEST 2014 i686
    [ 264.545] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
    [ 264.545] Build Date: 31 July 2014 11:55:52AM
    [ 264.545]
    [ 264.545] Current version of pixman: 0.32.6
    [ 264.546] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 264.546] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 264.547] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 19 15:54:25 2014
    [ 264.548] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 264.548] (==) No Layout section. Using the first Screen section.
    [ 264.549] (==) No screen section available. Using defaults.
    [ 264.549] (**) |-->Screen "Default Screen Section" (0)
    [ 264.549] (**) | |-->Monitor "<default monitor>"
    [ 264.549] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 264.549] (==) Automatically adding devices
    [ 264.549] (==) Automatically enabling devices
    [ 264.549] (==) Automatically adding GPU devices
    [ 264.549] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 264.549] Entry deleted from font path.
    [ 264.549] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 264.549] Entry deleted from font path.
    [ 264.550] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 264.550] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 264.550] Entry deleted from font path.
    [ 264.550] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 264.550] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 264.550] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 264.550] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 264.550] (II) Loader magic: 0x82a0700
    [ 264.550] (II) Module ABI versions:
    [ 264.550] X.Org ANSI C Emulation: 0.4
    [ 264.550] X.Org Video Driver: 18.0
    [ 264.550] X.Org XInput driver : 21.0
    [ 264.550] X.Org Server Extension : 8.0
    [ 264.557] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 264.558] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 264.560] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 264.563] (--) PCI:*(0:0:2:0) 8086:8108:1043:83ce rev 7, Mem @ 0xf3f80000/524288, 0xd0000000/268435456, 0xf3f40000/262144, I/O @ 0x0000d880/8
    [ 264.563] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 264.563] (II) LoadModule: "glx"
    [ 264.564] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 264.569] (II) Module glx: vendor="X.Org Foundation"
    [ 264.569] compiled for 1.16.0, module version = 1.0.0
    [ 264.569] ABI class: X.Org Server Extension, version 8.0
    [ 264.569] (==) AIGLX enabled
    [ 264.569] (==) Matched psb as autoconfigured driver 0
    [ 264.569] (==) Matched psb_drv as autoconfigured driver 1
    [ 264.569] (==) Matched psb as autoconfigured driver 2
    [ 264.569] (==) Matched psb_drv as autoconfigured driver 3
    [ 264.569] (==) Matched modesetting as autoconfigured driver 4
    [ 264.569] (==) Matched fbdev as autoconfigured driver 5
    [ 264.569] (==) Matched vesa as autoconfigured driver 6
    [ 264.569] (==) Assigned the driver to the xf86ConfigLayout
    [ 264.569] (II) LoadModule: "psb"
    [ 264.570] (WW) Warning, couldn't open module psb
    [ 264.570] (II) UnloadModule: "psb"
    [ 264.570] (II) Unloading psb
    [ 264.570] (EE) Failed to load module "psb" (module does not exist, 0)
    [ 264.571] (II) LoadModule: "psbdrv"
    [ 264.571] (WW) Warning, couldn't open module psbdrv
    [ 264.571] (II) UnloadModule: "psbdrv"
    [ 264.571] (II) Unloading psbdrv
    [ 264.571] (EE) Failed to load module "psbdrv" (module does not exist, 0)
    [ 264.571] (II) LoadModule: "modesetting"
    [ 264.572] (WW) Warning, couldn't open module modesetting
    [ 264.572] (II) UnloadModule: "modesetting"
    [ 264.572] (II) Unloading modesetting
    [ 264.572] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 264.572] (II) LoadModule: "fbdev"
    [ 264.573] (WW) Warning, couldn't open module fbdev
    [ 264.573] (II) UnloadModule: "fbdev"
    [ 264.573] (II) Unloading fbdev
    [ 264.573] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 264.573] (II) LoadModule: "vesa"
    [ 264.574] (WW) Warning, couldn't open module vesa
    [ 264.574] (II) UnloadModule: "vesa"
    [ 264.574] (II) Unloading vesa
    [ 264.574] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 264.574] (EE) No drivers available.
    [ 264.574] (EE)
    Fatal server error:
    [ 264.574] (EE) no screens found(EE)
    [ 264.574] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 264.574] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 264.575] (EE)
    Last edited by exidux (2014-09-19 18:13:18)

    Maybe i am confusing the gma500 kernel module driver with something it is not, or the autoconfig cant work with it...
    But no matter how it could be turned, i am not well versed in this area of setting up or using a linux distro.
    After letting it sink in that the log complained about not finding any module to use as a driver, and reading the wiki again
    after some rest (all-nighter, no sleep) ;
    https://wiki.archlinux.org/index.php/poulsbo
    Modesetting driver and dual monitor Setup
    To setup different resolution for external monitor using xrandr, xf86-video-modesetting from official repo is needed. If you choose to use the git package (xf86-video-modesetting-git), remember to recompile it after a new version of Xorg. After installing, an Xorg file is needed to setup the driver. Use this for device section:
    /etc/X11/xorg.conf.d/20-gpudriver.conf
    Section "Device"
        Identifier "gma500_gfx"
        Driver     "modesetting"
        Option     "SWCursor"       "ON"
    EndSection
    # pacman -S xf86-video-modesetting
    # reboot
    It boots into a functional Slim which then starts a functional (but featureless default) openbox WM.
    My mind got stuck on thinking about the gma500 kernel module as a standalone driver...
    ~ the great wiki saved it.

  • Unable to start OPMN service

    Hi group,
    I have applied patch 12.1.2 and followed some steps to configure SOA Gateway and after that I am unable to start Apache Server.
    I have enabled "debug" option in opmn.xml file as follow:
    <debug path="F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn\opmn.dbg" comp="internal;ons;pm" rotation-size="1500000" rotation-hour="0" />
    But nothing is created in opmn.dbg file.
    Service is started in Windows, but when I try to query it, it displays as follow:
    F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
    Thu 05/13/2010 01:15 PM
    Starting Oracle Process Manager (OPMN) ...
    CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
    Service is already running
    opmnctl: opmn already running
    STATE : 4 RUNNING
    exiting with status 0
    ERRORCODE = 0 ERRORCODE_END
    F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
    Thu 05/13/2010 01:15 PM
    Checking status of OPMN managed processes...
    Unable to connect to opmn.
    Opmn may not be up.
    exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    Any advice or help will be really appreciated.
    Thanks in advance.
    Kind regards,
    Francisco Mtz. Oviedo

    Hussein,
    I don't get any error when I stop and start using Services Windows.
    You know, file opmn.dbg is empty and there is no file opmn.log at F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn
    I am able to run AutoConfig without any problem.
    This is what I am getting when I try to use command mode:
    F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd start
    Thu 05/13/2010 01:33 PM
    Unable to connect to opmn.
    Opmn may not be up.
    Oracle Process Manager Deamon (OPMN) is not running
    exiting with status 1
    ERRORCODE = 1 ERRORCODE_END
    F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd status
    Thu 05/13/2010 01:34 PM
    Checking status of OPMN managed processes...
    Unable to connect to opmn.
    Opmn may not be up.
    exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
    Thu 05/13/2010 01:34 PM
    Checking status of OPMN managed processes...
    Unable to connect to opmn.
    Opmn may not be up.
    exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
    Thu 05/13/2010 01:34 PM
    Starting Oracle Process Manager (OPMN) ...
    CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
    Service is already running
    opmnctl: opmn already running
    STATE : 4 RUNNING
    exiting with status 0
    ERRORCODE = 0 ERRORCODE_END
    Thanks in advance.
    Kind regards,
    Francisco Mtz. Oviedo

  • Problem starting apache web server [SOLVED]

    when i start apache manually (sudo /etc/rc.d/./httpd start) i just get a fail, but when i start it through webmin i get the following:
    stty: standard input: Inappropriate ioctl for device
    Can someone tell me how i can fix this, or if it is too hard to fix, give me the name of the next best http server available?

    i had problems with apache too, but then i just did some changes:
    in httpd.conf i changed user from nobody to httpd;
    then added to system user httpd via adduser httpd in group nobody and it worked well

  • [SOLVED] Terminator stopped working Unable to start shell:/bin/bash

    Hello,
    I just wanted to share as I didn't found anything about it,
    Since yesterday I can't launch my favorite terminal emulator which is terminator, it gives me :
    Unable to start shell:/bin/bash
    displayed in terminator window where I'm supposed to type commands.
    What is strange is that I can launch /bin/bash in tty's plus I installed xterm temporarily which works fine with bash.
    One more thing is that if I close terminator window it closes my graphical session !
    Any idea to troubleshoot this ?
    Last edited by detestable (2013-08-16 08:39:54)

    I'm getting this :
    me@latitude ~ $ gdb /usr/bin/python
    GNU gdb (GDB) 7.6
    Copyright (C) 2013 Free Software Foundation, Inc.
    License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
    This is free software: you are free to change and redistribute it.
    There is NO WARRANTY, to the extent permitted by law. Type "show copying"
    and "show warranty" for details.
    This GDB was configured as "x86_64-unknown-linux-gnu".
    For bug reporting instructions, please see:
    <http://www.gnu.org/software/gdb/bugs/>...
    Reading symbols from /usr/bin/python3.3...(no debugging symbols found)...done.
    (gdb) run /bin/terminator
    Starting program: /usr/bin/python3.3 /bin/terminator
    warning: Could not load shared library symbols for linux-vdso.so.1.
    Do you need "set solib-search-path" or "set sysroot"?
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    File "/bin/terminator", line 103
    except (KeyError,ValueError), ex:
    ^
    SyntaxError: invalid syntax
    [Inferior 1 (process 13780) exited with code 01]
    I also tried gnome-terminal which is not working correctly (installed right now)
    From the user interface it says in red :
    "There was an error creating the child process for this terminal"
    "grantpt failed: Operation not permitted"
    From gdb :
    m@latitude ~ $ gdb /usr/bin/gnome-terminal
    GNU gdb (GDB) 7.6
    Copyright (C) 2013 Free Software Foundation, Inc.
    License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
    This is free software: you are free to change and redistribute it.
    There is NO WARRANTY, to the extent permitted by law. Type "show copying"
    and "show warranty" for details.
    This GDB was configured as "x86_64-unknown-linux-gnu".
    For bug reporting instructions, please see:
    <http://www.gnu.org/software/gdb/bugs/>...
    Reading symbols from /usr/bin/gnome-terminal...(no debugging symbols found)...done.
    (gdb) run
    Starting program: /usr/bin/gnome-terminal
    warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7ffff7ffa000
    warning: Could not load shared library symbols for linux-vdso.so.1.
    Do you need "set solib-search-path" or "set sysroot"?
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    [New Thread 0x7fffea2b9700 (LWP 13839)]
    Error: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._vte_2dpty_2derror.Code1: grantpt failed: Operation not permitted
    [Thread 0x7fffea2b9700 (LWP 13839) exited]
    [Inferior 1 (process 13835) exited normally]
    Only xterm seems to work

  • [SOLVED] Network Configuration -- unable to start a service file

    I am following this wiki page (Using Static IP address step) and created /etc/systemd/system/network.service as instructed
    [Unit]
    Description=Connect to the other pc
    Wants=network.target
    Before=network.target
    BindsTo=sys-subsystem-net-devices-lan.device
    After=sys-subsystem-net-devices-lan.device
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    EnvironmentFile=/etc/conf.d/network
    ExecStart=/sbin/ip link set dev lan up
    ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
    ExecStart=/sbin/ip route add default via 192.168.1.1
    ExecStop=/sbin/ip addr flush dev lan
    ExecStop=/sbin/ip link set dev lan down
    [Install]
    WantedBy=multi-user.target
    But I am unable to start network.service
    $ sudo systemctl start network
    Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.
    $ systemctl status network.service
    network.service - Connect to voice
    Loaded: loaded (/etc/systemd/system/network.service; enabled)
    Active: failed (Result: resources)
    $ sudo journalctl -xn
    -- Logs begin at Sat 2013-03-30 03:48:02 AMT, end at Thu 2013-04-04 18:17:46 AMT. --
    Apr 04 18:17:26 work sudo[24774]: pam_unix(sudo:session): session closed for user root
    Apr 04 18:17:44 work sudo[25354]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/systemctl start network
    Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session opened for user root by void(uid=0)
    Apr 04 18:17:44 work systemd[1]: Starting Connect to the other pc...
    -- Subject: Unit network.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/7d4958e842da4a758f6c1cdc7b36dcc5
    -- Unit network.service has begun starting up.
    Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
    Apr 04 18:17:44 work systemd[1]: network.service failed to run 'start' task: No such file or directory
    Apr 04 18:17:44 work systemd[1]: Failed to start Connect to the other pc.
    -- Subject: Unit network.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
    -- Unit network.service has failed.
    -- The result is failed.
    Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session closed for user root
    Apr 04 18:17:46 work sudo[25421]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/journalctl -xn
    Apr 04 18:17:46 work sudo[25421]: pam_unix(sudo:session): session opened for user root by void(uid=0)
    Additional info:
    I have connected 2 PCs with LAN (Ethernet) cable and want configure them for exchanging files. Both running Arch Linux. I am following the Network Configuration wiki page from the beginning. Didn't have luck with DHCP/dynamic IP, so trying Static IP this time. Restarting the pc with network.service enabled results in same error (in systemctl --failed). Same error message on both PCs.
    Trying to run ExecStart lines one by one:
    $ sudo /sbin/ip link set dev lan up
    $ sudo /sbin/ip addr add 192.168.1.2/24 dev lan
    RTNETLINK answers: File exists
    $ sudo /sbin/ip route add default via 192.168.1.1
    RTNETLINK answers: File exists
    Does this mean there already is IP address and route assigned? If so, how to find out which service has done that? Do I need to remove it? Am I following the right wiki page (didn't find another)?
    What am I doing wrong and how can I correct this error? / Point me in right direction.
    Last edited by axper (2013-04-04 19:26:17)

    henk wrote:
    EnvironmentFile=/etc/conf.d/network
    Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
    have you checked if the network file exists?
    Oh thanks, that line was causing problems! Now I do have network.service(s) running on both PC's with this content:
    [Unit]
    Description=Connect to my desktop/laptop
    Wants=network.target
    Before=network.target
    BindsTo=sys-subsystem-net-devices-lan.device
    After=sys-subsystem-net-devices-lan.device
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    ExecStart=/sbin/ip link set dev lan up
    ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
    ExecStart=/sbin/ip route add default via 192.168.1.1
    ExecStop=/sbin/ip addr flush dev lan
    ExecStop=/sbin/ip link set dev lan down
    [Install]
    WantedBy=multi-user.target
    I don't get any errors, and this is network's status (on both PCs) when cable is connected
    $ sudo systemctl restart network
    $ systemctl status network
    network.service - Connect to my desktop
    Loaded: loaded (/etc/systemd/system/network.service; disabled)
    Active: active (exited) since Thu 2013-04-04 22:43:22 AMT; 8s ago
    Process: 9761 ExecStop=/sbin/ip link set dev lan down (code=exited, status=0/SUCCESS)
    Process: 9757 ExecStop=/sbin/ip addr flush dev lan (code=exited, status=0/SUCCESS)
    Process: 9768 ExecStart=/sbin/ip route add default via 192.168.1.1 (code=exited, status=0/SUCCESS)
    Process: 9766 ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan (code=exited, status=0/SUCCESS)
    Process: 9764 ExecStart=/sbin/ip link set dev lan up (code=exited, status=0/SUCCESS)
    And here wiki page is no more help. How can I test connection?
    I try to ping, and it works on both machines (if it's the right thing to test?)
    $ ping -c3 192.168.1.2
    PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
    64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.039 ms
    64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.050 ms
    64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=0.060 ms
    --- 192.168.1.2 ping statistics ---
    3 packets transmitted, 3 received, 0% packet loss, time 1998ms
    rtt min/avg/max/mdev = 0.039/0.049/0.060/0.011 ms
    Now I need to figure out how to share files. Thanks all.
    Last edited by axper (2013-04-04 19:04:43)

  • Unable to start the managed server on OBIEE11.1.1.6.0, Oracle RTD exception

    Hi
    I am unable to start the Managed server on OBIEE 11.1.1.6.0 , as it is giving the following exception
    "[bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor] [tid: RTD_Worker_9] [userId: <anonymous>] [ecid: 0000JxpZwaCDkZ__xPWByW1Hm1HW000001,1:23440] [APP: OracleRTD#11.1.1] [WSM_POLICY_NAME: oracle/wss_username_token_client_policy] Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
    Here I am providing the bi_server1.log, bi_server1.out log,bi_server1-diagnostic.log
    Please suggest me workaround to resolve this issue,
    thanks in advance
    Pavan
    bi_server1.log
    ==========
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <WebLogicServer> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900822> <BEA-000000> <WebLogic Server "bi_server1" version:
    WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638  Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Notice> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900902> <BEA-170019> <The server log file /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900906> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066900981> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "http" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "https" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901100> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901101> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901106> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901107> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <RJVM> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901133> <BEA-000570> <Network Configuration for Channel "bi_server1"
    Listen Address   :9704
    Public Address   N/A
    Http Enabled   true
    Tunneling Enabled  false
    Outbound Enabled  false
    Admin Traffic Enabled  true>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901212> <BEA-002609> <Channel Service initialized.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901244> <BEA-000406> <PosixSocketMuxer was built on Jan 10 2008 23:07:45>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901301> <BEA-000436> <Allocating 4 reader threads.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901302> <BEA-000446> <Native IO Enabled.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <IIOP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901427> <BEA-002014> <IIOP subsystem enabled.>
    ####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907382> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907849> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908041> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_LVk1d2v3EBrlDS/rSIpIRiGgLnM=>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908346> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908755> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909006> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909180> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server bi_server1 for security realm myrealm.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Notice> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909181> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909747> <BEA-002622> <The protocol "[iiop, ldap, http, https, ldaps, cluster-broadcast, admin, iiops, t3s, cluster-broadcast-secure, snmp, t3]" is now configured.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <XML> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909759> <BEA-130036> <Initializing XMLRegistry.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <messaging.interception> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909771> <BEA-400000> <Initializing message interception service>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910180> <BEA-280008> <Opening the persistent file store "_WLS_bi_server1" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/store/default requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910314> <BEA-280009> <The persistent file store "_WLS_bi_server1" (fb352aa7-3e6f-4655-b314-8b2cf7d9caa3) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=109.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910462> <BEA-001135> <Initializing the JDBC service.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910473> <BEA-001137> <Initialization complete.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001138> <Resuming the JDBC service.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001140> <Resume complete.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910507> <BEA-190000> <Initializing J2EE Connector Service......>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910510> <BEA-190001> <J2EE Connector Service initialized successfully>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910593> <BEA-040305> <JMS service is initialized and in standby mode.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910637> <BEA-040090> <Deployed 8 default connection factories.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910641> <BEA-040306> <JMS service is active now.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910680> <BEA-101128> <Initializing HTTP services.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101135> <bi_server1 is the default Web server.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101052> <[HttpServer (defaultWebserver) name: bi_server1] Initialized>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910700> <BEA-101129> <Initializing the Web application container.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910746> <BEA-180046> <INFO: Logging service enabled.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910749> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910750> <BEA-180046> <INFO: TC Task Manager instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910753> <BEA-180046> <INFO: TC security service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910756> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910758> <BEA-180046> <INFO: TC Transaction service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910770> <BEA-220031> <The server does not support reliable SOAP messaging.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910771> <BEA-220027> <Web Service reliable agents are started on the server.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMX> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910888> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://10.11.34.111:9704/jndi/weblogic.management.mbeanservers.runtime .>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910904> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
    ####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911658> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
    ####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911696> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912880> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912883> <BEA-000256> <Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912942> <BEA-000256> <Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912956> <BEA-000256> <Invoking oracle.ias.cache.Startup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912959> <BEA-000256> <Invoking oracle.dms.wls.DMSStartup.main(null)>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913225> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= null"; Assumed Blocking Config= true; JDK version= 1.6.0; Operating System= AIX.>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913226> <BEA-141279> <Detected BLOCKING java entropy configuration. This is the most secure setting, but may cause performance issues on machines with few sources of entropy.>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913228> <BEA-141187> <Java system properties are defined as follows:
    EPM_ORACLE_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
    EPM_ORACLE_INSTANCE = novalue
    EPM_REG_PROPERTIES_PATH = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
    HYPERION_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
    XDO_FONT_DIR = /app1/orabi/Oracle/Middleware/Oracle_BI1/common/fonts
    bi.oracle.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
    com.ibm.cpu.endian = big
    com.ibm.oti.configuration = scar
    com.ibm.oti.jcl.build = 20110622_1654
    com.ibm.oti.shared.enabled = false
    com.ibm.oti.vm.bootstrap.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
    com.ibm.oti.vm.library.version = 24
    com.ibm.vm.bitmode = 64
    common.components.home = /app1/orabi/Oracle/Middleware/oracle_common
    domain.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
    em.oracle.home = /app1/orabi/Oracle/Middleware/oracle_common
    epm.useApplicationContextId = false
    file.encoding = utf-8
    file.separator = /
    hyperion.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
    ibm.signalhandling.rs = false
    ibm.signalhandling.sigchain = true
    ibm.signalhandling.sigint = true
    ibm.system.encoding = ISO8859-1
    igf.arisidbeans.carmlloc = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/carml
    igf.arisidstack.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/arisidprovider
    java.assistive = ON
    java.awt.graphicsenv = sun.awt.X11GraphicsEnvironment
    java.awt.headless = true
    java.awt.printerjob = sun.print.PSPrinterJob
    java.class.path = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jdbc/jdk16/bijdbc.jar::/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/app1/orabi/Oracle/Middleware
    java.class.version = 50.0
    java.compiler = j9jit24
    java.endorsed.dirs = /usr/java6_64/jre/lib/endorsed
    java.ext.dirs = /usr/java6_64/jre/lib/ext
    java.fullversion = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
    J9VM - 20110624_085526
    JIT  - r9_20101028_17488ifx17
    GC   - 20101027_AA
    java.home = /usr/java6_64/jre
    java.io.tmpdir = /tmp/
    java.jcl.version = 20110530_01
    java.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/usr/lib
    java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
    java.protocol.handler.pkgs = oracle.mds.net.protocol|weblogic.net
    java.runtime.name = Java(TM) SE Runtime Environment
    java.runtime.version = pap6460sr9fp2-20110627_03 (SR9 FP2)
    java.security.policy = /app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
    java.specification.name = Java Platform API Specification
    java.specification.vendor = Sun Microsystems Inc.
    java.specification.version = 1.6
    java.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration
    java.util.prefs.PreferencesFactory = java.util.prefs.FileSystemPreferencesFactory
    java.vendor = IBM Corporation
    java.vendor.url = http://www.ibm.com/
    java.version = 1.6.0
    java.vm.info = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
    J9VM - 20110624_085526
    JIT  - r9_20101028_17488ifx17
    GC   - 20101027_AA
    java.vm.name = IBM J9 VM
    java.vm.specification.name = Java Virtual Machine Specification
    java.vm.specification.vendor = Sun Microsystems Inc.
    java.vm.specification.version = 1.0
    java.vm.vendor = IBM Corporation
    java.vm.version = 2.4
    javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
    javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
    javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
    javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
    jrf.version = 11.1.1
    jrockit.optfile = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt
    jxe.current.romimage.version = 15
    jxe.lowest.romimage.version = 15
    oracle.biee.search.bisearchproperties = /app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jee/BISearchConfig.properties
    oracle.core.ojdl.logging.applicationcontextprovider = oracle.core.ojdl.logging.WlsApplicationContextImpl
    oracle.core.ojdl.logging.componentId = bi_server1
    oracle.core.ojdl.logging.config.file = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ovd_11.1.1/templates/ovd-logging.xml
    oracle.core.ojdl.logging.usercontextprovider = oracle.core.ojdl.logging.WlsUserContextImpl
    oracle.deployed.app.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/tmp/_WL_user
    oracle.deployed.app.ext = /-
    oracle.domain.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
    oracle.ecsf.configuration.class = oracle.biee.search.services.BISearchServiceConfiguration
    oracle.ecsf.security.service = oracle.biee.search.security.BISearchSecurityService
    oracle.notification.filewatching.interval = 2000
    oracle.security.jps.config = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/jps-config.xml
    oracle.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/servers/bi_server1
    org.apache.commons.logging.Log = org.apache.commons.logging.impl.Jdk14Logger
    org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
    org.xml.sax.driver = weblogic.xml.jaxp.RegistryXMLReader
    org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
    os.arch = ppc64
    os.encoding = ISO8859-1
    os.name = AIX
    os.version = 6.1
    path.separator = :
    platform.home = /app1/orabi/Oracle/Middleware/wlserver_10.3
    rtd.instanceName = RTD_bi_server1
    server.group = obi
    sun.arch.data.model = 64
    sun.boot.class.path = /usr/java6_64/jre/lib/ppc64/default/jclSC160/vm.jar:/usr/java6_64/jre/lib/annotation.jar:/usr/java6_64/jre/lib/beans.jar:/usr/java6_64/jre/lib/java.util.jar:/usr/java6_64/jre/lib/jndi.jar:/usr/java6_64/jre/lib/logging.jar:/usr/java6_64/jre/lib/security.jar:/usr/java6_64/jre/lib/sql.jar:/usr/java6_64/jre/lib/ibmorb.jar:/usr/java6_64/jre/lib/ibmorbapi.jar:/usr/java6_64/jre/lib/ibmcfw.jar:/usr/java6_64/jre/lib/rt.jar:/usr/java6_64/jre/lib/charsets.jar:/usr/java6_64/jre/lib/resources.jar:/usr/java6_64/jre/lib/ibmpkcs.jar:/usr/java6_64/jre/lib/ibmcertpathfw.jar:/usr/java6_64/jre/lib/ibmjgssfw.jar:/usr/java6_64/jre/lib/ibmjssefw.jar:/usr/java6_64/jre/lib/ibmsaslfw.jar:/usr/java6_64/jre/lib/ibmjcefw.jar:/usr/java6_64/jre/lib/ibmjgssprovider.jar:/usr/java6_64/jre/lib/ibmjsseprovider2.jar:/usr/java6_64/jre/lib/ibmcertpathprovider.jar:/usr/java6_64/jre/lib/ibmxmlcrypto.jar:/usr/java6_64/jre/lib/management-agent.jar:/usr/java6_64/jre/lib/xml.jar:/usr/java6_64/jre/lib/jlm.jar:/usr/java6_64/jre/lib/javascript.jar
    sun.boot.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
    sun.io.unicode.encoding = UnicodeBig
    sun.java.command = weblogic.Server
    sun.java.launcher = SUN_STANDARD
    sun.jnu.encoding = ISO8859-1
    user.country = US
    user.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
    user.home = /home/orabi
    user.language = en
    user.name = orabi
    user.timezone = Asia/Riyadh
    vde.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/ldap
    weblogic.MaxMessageSize = 50000000
    weblogic.Name = bi_server1
    weblogic.ProductionModeEnabled = true
    weblogic.ReverseDNSAllowed = false
    weblogic.alternateTypesDirectory = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1
    weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
    weblogic.ext.dirs = /app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
    weblogic.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
    weblogic.jdbc.remoteEnabled = false
    weblogic.management.clearTextCredentialAccessEnabled = ********
    weblogic.management.discover = false
    weblogic.management.server = http://10.11.34.111:7001
    weblogic.nodemanager.ServiceEnabled = true
    weblogic.security.SSL.enableJSSE = true
    weblogic.security.SSL.ignoreHostnameVerification = true
    weblogic.security.TrustKeyStore = DemoTrust
    weblogic.system.BootIdentityFile = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/nodemanager/boot.properties
    wls.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
    wlw.iterativeDev = false
    wlw.logErrorsToConsole = false
    wlw.testConsole = false
    xdo.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/bipublisher
    >
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913766> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_internal">
    ####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914573> <BEA-000365> <Server state changed to STANDBY>
    ####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914579> <BEA-000365> <Server state changed to STARTING>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914605> <BEA-281003> <SAF Service has been initialized.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914612> <BEA-281002> <SAF Service has been started.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <WseeCore> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914622> <BEA-220502> <The Wsee Service is starting>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <Deployer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914743> <BEA-149209> <Resuming.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914823> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls9_async_response">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916264> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_cluster_internal">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916333> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_deployment_internal">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916428> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "EPMSystemRegistry">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916440> <BEA-001177> <Creating Connection Pool named EPMSystemRegistry, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916455> <BEA-000626> <Free resources in pool "EPMSystemRegistry" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916577> <BEA-001124> <Created Connection Pool named EPMSystemRegistry.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916591> <BEA-001174> <Creating Data Source named EPMSystemRegistry, JNDI Name = jdbc/EPMSystemRegistry.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916642> <BEA-001512> <Data Source EPMSystemRegistry has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916644> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bip_datasource">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916652> <BEA-001177> <Creating Connection Pool named bip_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916654> <BEA-000626> <Free resources in pool "bip_datasource" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916655> <BEA-001124> <Created Connection Pool named bip_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916656> <BEA-001174> <Creating Data Source named bip_datasource, JNDI Name = jdbc/bip_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916676> <BEA-001512> <Data Source bip_datasource has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916678> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "mds-owsm">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916687> <BEA-001177> <Creating Connection Pool named mds-owsm, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = SendStreamAsBlob=true;user=DEV_MDS;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916688> <BEA-000626> <Free resources in pool "mds-owsm" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916690> <BEA-001124> <Created Connection Pool named mds-owsm.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916691> <BEA-001174> <Creating Data Source named mds-owsm, JNDI Name = jdbc/mds/owsm.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916726> <BEA-001512> <Data Source mds-owsm has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916728> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "rtd_datasource">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916735> <BEA-001177> <Creating Connection Pool named rtd_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916736> <BEA-000626> <Free resources in pool "rtd_datasource" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916738> <BEA-001124> <Created Connection Pool named rtd_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916740> <BEA-001174> <Creating Data Source named rtd_datasource, JNDI Name = SDDS.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916757> <BEA-001512> <Data Source rtd_datasource has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916922> <BEA-280008> <Opening the persistent file store "BipJmsStore" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/BipJmsStore requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917017> <BEA-280009> <The persistent file store "BipJmsStore" (68f997df-e4a0-4eb1-9497-8d994726f787) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=16.>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917027> <BEA-040321> <JMSServer "BipJmsServer" is resuming.>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917092> <BEA-282003> <The messaging kernel BipJmsServer will use up to 536,870,912 bytes of memory before paging begins>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917115> <BEA-282001> <The messaging kernel BipJmsServer is beginning recovery of its persistent state>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917158> <BEA-282002> <The messaging kernel BipJmsServer has recovered 0 persistent messages>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917200> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "BipJmsResource">
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917408> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Job.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921006> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Report.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921044> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Email.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921063> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.File.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921078> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.FTP.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921091> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Print.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921107> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.WebDAV.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921125> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Fax.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921143> <BEA-040406> <Distributed destination "BipJmsResource!BIP.System.T" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921170> <BEA-040108> <User connection factory "BipJmsResource!BIP.JMS.CF" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921185> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "Module-FMWDFW">
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921232> <BEA-320114> <Initializing the Diagnostics Harvester.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921241> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921245> <BEA-320119> <The Harvester is now in a inactive state.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921715> <BEA-160151> <Registered library Extension-Name: UIX, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (WAR).>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921841> <BEA-160151> <Registered library Extension-Name: adf.oracle.businesseditor, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922111> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922334> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain.webapp, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922391> <BEA-160151> <Registered library Extension-Name: bithirdparty, Specification-Version: 11.1.1 (JAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <13

    Hi,
    I tried starting the server from the console as well as from command prompt. Here I am giving the command below.
    nohup ./startManagedWebLogic.sh bi_server1 t3://machineIP:portNo > bis1_startup.log &
    But each time I got the same exception.
    Korandla

  • BOFC Unable to start the data source

    Hi there,
    i've done a standalone install using SQL 2008 R2 express. But i'm unable to start the data source and get this error:
    Failed to start data source
    Failed to start server instances on machine DELL1.
    Failed to initialize server configured on machine DELL1.
    Class not registered
    Thanks,
    Anees

    Ok, problem solved.
    I had to create a seperate DCOM user and assign it to the following roles in windows:
    log on as a batch job
    log on as a service
    then assign this DCOM user to the Ctbroker and CTserver. As i'm not running this on a domain, there was no need to use 'packet level authentication'. So i set the authentication level to none.
    There was no need to use the web based admin interface. Ctadmin.msc worked perfectly.
    Thanks,
    Anees

  • "The Application was unable to start correctly (0xc000007b). Click OK to close the application" error when starting Visual Studio Community

    Hi,
    I just installed Visual Studio and when I launch it, the following error pops up: "The Application was unable to start correctly (0xc000007b). Click OK to close the application". I tried searching online but no usable results. Please help!
    jd

    Hi,
    There is not enough information about the problem. For troubleshooting, I recommend you can use Process Monitor to detect whether there's any process failed.
    You can download Process Monitor and see how to use it for troubleshooting in below links:
    http://support.microsoft.com/kb/939896
    http://blogs.technet.com/b/askperf/archive/2007/06/01/troubleshooting-with-process-monitor.aspx
    There are a lot of log entries in Process Monitor, you may filter Visual Studio process only(proces = devenv.exe). And you can upload the logs to OneDrive so that we can investigate them.
    Also, you can refer to Gfazil's post in 
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/96035692-9a50-40d4-a7d3-48bda87d11ec/the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application-when?forum=vssetup
    Please try the method he mentioned to see whether the problem can occur:
    " Replacing the dlls mentioned below from a machine that is working solves the problem:
    c:\Windows\SysWOW64\msvcp100.dll
    c:\Windows\SysWOW64\msvcp100d.dll
    c:\Windows\SysWOW64\msvcr100.dll
    c:\Windows\SysWOW64\msvcr100_clr0400.dll
    c:\Windows\SysWOW64\msvcr100d.dll "
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • "The application was unable to start correctly (0x...

    I have a Dell All-in-One that I had to send in for a new motherboard. While they had it, I had them reformat it. I'm trying to put Skype back on it, but I keep getting this error message after it downloads and when it tries to install: "The application was unable to start correctly (0xc000007b). Click OK to close the application." I'm running Windows 7 Home Premium 64-bit. None of my other programs that I've had to reinstall have caused me a bit of trouble, but Skype will not move past this error message. Any help would be appreciated.
    Solved!
    Go to Solution.

    Open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the recent error messages with timestamp corresponding to Skype crash. Copy and paste here the text from the General tab.

Maybe you are looking for

  • Balance qty report

    Hi gurus, Is there any report for open sales orders balance qty.. Regards, VSN

  • How to sync iPhone 4 and iTunes 11?

    Yesterday I've made lots of app updates (of my iPhone apps), and I've also downloaded an app, everything via iTunes 11. Now, I want to sync them to my iPhone 4. That's it. However, iTunes doesn't seem to detect my iPhone. I've read on posts and threa

  • Duplicate database from active database in 11g?

    Does anyone know if it's possible to clone a database from stby by issuing RMAN duplicate database FROM ACTIVE DATABASE command in 11g? I know it's possible from primary to create stby. Thanks in advance

  • Finder Won't Launch After Traumatic Re-Install

    Hello All, I've had one **** of a ride. I run 10.3.9. After a bad Mac update corrupted my boot disc, I was forced to reinstall...but since I bought my G4 used, I didn't have the original discs. I needed a computer up and running immediately, so insta

  • Variable Code for Date

    Requirement: I have Posting Date for all Objects Now i want to create the <b>Variable “PSTVAR”</b>such that the variable will populate <b>only the entries with User Input Posting Date(During Report Execution) >=greater than equal to Posting Date(OPST