[SOLVED] Upgraded to GRUB2, none of the menu choices are bootable

So I installed Arch a few days ago and I've been loving it so far... however, when it installed GRUB (not GRUB 2), it failed to detect my Windows 7 installation. I couldn't get GRUB (1) to detect it at all, so I decided to try installing GRUB 2. It installed, said everything was fine, and so I rebooted to test it out. There are now 5 items in the GRUB menu:
Arch Linux, with Linux vmlinuz26-lts
Arch Linux, with Linux vmlinuz26-lts Fallback
Arch Linux, with Linux vmlinuz26
Arch Linux, with Linux vmlinuz26 Fallback
Memory Test (memtest86+)
None of the Arch options are bootable. Furthermore, those options seem to indicate version 2.6 of the kernel, but it should be 3. All of the options give the same output when selected:
error: no such device: fb70f55b-e58a-4ac6-af45-19d19cc24d60.
Loading Linux vmlinuz26-lts ...
error: file not found.
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue ...
It seems GRUB 2 doesn't want you to configure manually using grub.cfg, but its detection script apparently is not working at all. I have an Arch Live USB that I'm using to poke around, but not getting anywhere. Booting to the LiveUSB then running install-grub gives me a strange error:
#install-grub /dev/sda /dev/sda2
Installing the GRUB bootloader...
/sbin/install-grub: line 73: k/by-label/ARCH_201108-1: division by 0 (error token is "-label/ARCH_201108-1")
Error: Missing/Invalid root device:
My disk is partitioned as such:
/dev/sda1 - Ubuntu ext4
/dev/sda2 - Arch ext4
/dev/sda3 - Windows 7 ntfs
/dev/sda4 - Arch/Ubuntu shared swap
Thanks in advance for any assistance.
EDIT: Ended up just chrooting and installing LILO-- config seems a lot more straight-forward. To anyone else having this problem, I just booted from my Arch LiveUSB and did the following:
# mount -t ext4 /dev/sda2 /mnt
# mount --bind /proc /mnt/proc
# mount --bind /sys /mnt/sys
# mount --bind /dev /mnt/dev
# chroot /mnt
# pacman -Sy lilo
# nano /etc/lilo.conf
(change the boot line to point to arch's disk, and edit each entry to point to arch's partition(s))
# lilo
# exit
# reboot
Last edited by dtomasiewicz (2011-10-21 17:46:33)

Thanks for the help guys... looks like this was actually a failure on my part. I missed the line on the wiki article that said to install os-prober if you're dual-booting. Once I installed it and ran grub-mkconfig it recognized Ubuntu and Arch, then I was able to add Windows 7 to /etc/grub.d/40_custom.
Last edited by dtomasiewicz (2011-10-19 15:30:46)

Similar Messages

I am using dreamweaver cs6 and none of the menu's are showing up like the common, form, layout, spry etc...not sure why?

i am using dreamweaver cs6 and none of the menu's are showing up like the common, form, layout, spry etc...not sure why?

Which version of CC -- 13, 2014, or 2014.1? You'll find it under the Help menu > About DW.
Spry Menus are gone.
Color is something you add with CSS.
Nancy O.

Since upgrading to Mail 7.0 the menu popup from right clicking an element in an email has changed.

Since upgrading to Mail 7.0 the menu popup from right clicking an element in an email has changed. There is now only a short three item menu:
Previously there was a longer menu (like the one when right clicking an item on a Safari page):
I've looked in Preferences and at all the Mail dropdown items but can't find any way to get the old menu back (or why it changed). In particular, I miss the "copy image" item which allowed me to copy an item image into a new email for forwarding. I've got two email accounts, an IMAP and a POP. The behavior is the same with both.
Any ideas?
Thanks,
Richard

Your screen shots are not visible to me. But I think I understand your question.
Several thoughts come to mind:
rbhix wrote:
In particular, I miss the "copy image" item which allowed me to copy an item image into a new email for forwarding.
You can still, of course, simply forward the entire email message containing the image.
You could also use the "Save Attachment ..." feature available when you right click and copy and paste from there once the image is saved.
Less likely, you could also use the "Share" feature available when you right click, though I suspect it may not offer sharing options that you would like.

None of the 3D options are active in my menu. What am I missing?

I have the up-to-date Creative Cloud version of Photoshop, but none of the 3D options are active in the menu. What am I missing?
I tried clicking the "Get More Content" but didn't find anything which would apply to the basic 3D functions in the menu.
Thank you for any light you can shed on this.

Common Photoshop Issues | Mylenium's Error Code Database
Mylenium

After upgrade to ios5, none of the apps will load. Touching an icon does not open the app; it just blinks and returns to the screen.

After upgrade to ios5, none of the apps will load. Touching an icon does not open the app; it just blinks and returns to the screen.

Go to the App Stor and download an app- any free app will do, it doesn't matter.
Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
And no, you don't have to keep that free one you just downloaded. You can delete it if you don't want it.

I have been buying music n tones for my iphone but since i change for the iphone 5 none of the old staff are in my new one eve i have safe it on icloud i just got my contact nothing else

i have been buying music n tones for my iphone but since i change for the iphone 5 none of the old staff are in my new one eve i have safe it on icloud i just got my contact nothing else i need some one helpe wt this issue cus i spend money and thing that i cant have back

adkennon wrote:
And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

None of the network adapters are bound to the Netmon driver.If you have just installed, you may need to log out and log back in order to obtain the proper rights to capture. Please refer to the product help for more information.

Hi,
To analyze Lync issues I have installed these applications in my windows 7 x64 laptop
1) network monitor 3.4
2)Lync network monitor parser
3)nmdecrypt2.3
4)network monitor parser3.4
Installtion got completed successfully but when I try to start capture I get this error everytime.......
"None of the network adapters are bound to the Netmon driver.If you have just installed, you may need to log out and log back in order to obtain the proper rights to capture. Please refer to the product help for more information"
I read many technet articles and other blogs but that didn't solve this issue. I tried things like
A) Run as administrator
B) nmconfig /install in cmd
So could you please help me how I can fix this issue?
Regards,
Ajit

Seems our driver didn't get installed. What you see when you type "sc query nm3" from a command prompt?
Thanks,
Paul

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
Thanks
Derek

Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

Essbase answers - None of the fact tables are compatible with the query request "member"

Hi,
I have modelled an Essbase database into the repository.
If I pull the measure, period and year dimension in and filter on the year (member) and display the year (member) along with the period (alias) and measure it errors with =>
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Fiscal Year.Fiscal Year Code. (HY000)
However, all other things being equal if I change the year displayed to the alias then it works.
Anyone tell me why??
Is there a limitation that Essbase brings through that you cannot view what you filter on?
thanks,
Robert.

Hi
i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
Gl Balances : D1
Code Commbination: F1
Gl Sets Of Books : F2
I have checked the joins in physical and BMM layer..all are fine..

Error: None of the fact tables are compatible with the query request

Hi experts,
I have one confirm dimension D1 and other two fact table F1 and F2 (F1 and F2 are connected to D1)
when i create a report from D1 and F1 the report is running fine. But pull the column from F2 also in this report i am getting the following error
None of the fact tables are compatible with the query request Code Combinations
please suggest on the same.
Regards,
S

Hi
i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
Gl Balances : D1
Code Commbination: F1
Gl Sets Of Books : F2
I have checked the joins in physical and BMM layer..all are fine..

None of the fact tables are compatible

hi,
am developing report from two fact table columns and one dimension table in obiee 11.1.1.5.0.
am getting error
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Fact - Retail.Retail. (HY000)
SQL Issued: SELECT 0 s_0, "TM Vehicle Sales"."- Offtake Facts"."Offtake" s_1, "TM Vehicle Sales"."- Retail Facts"."Retail" s_2, "TM Vehicle Sales"."Distributor"."Country" s_3 FROM "TM Vehicle Sales"
regards
vcm

need to see your design, dim is shared between the facts?
I think you can assume the physical query based on your columns selection..
Now pick one column from 1st fact and 2nd column from dim run a report, get physcial query and verify the joins with obiee and your own query.
then add column from 2nd query see how it works
Edited by: svee on Jun 29, 2012 6:21 AM

None of the dimension tables are compatible with the query request

Hi,
i am experiencing the below error while querying columns alone from employee dimension (w_employee_d) in workforce profile SA. There is only one column in my report which is employee number coming from employee dimension. when i query other information like job, region, location etc i am not getting any error. the below error appears only when querying columns from employee dimension. the content tab level for the LTS of employee dimension is set to employee detail.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14077] None of the dimension tables are compatible with the query request Dim - Employee.Employee Number. (HY000)
SQL Issued: SELECT 0 s_0, "Human Resources - Workforce Profile"."Employee Attributes"."Employee Number" s_1 FROM "Human Resources - Workforce Profile" FETCH FIRST 65001 ROWS ONLY.
couldn't able to know the exact reason. Any suggestions would be highly appreciated.
Regards.

hi user582149,
It is difficult to answer you question with such a little amount of details. Could you specify:
- how many facts/dimensions are you using in the query?
- what is the structure of your Business Model?
- which version of OBI are you using?
- what does your log say?
I hope to tell you more having the information above
Cheers

None of the fact tables are compatible error

Hi All,
I do see this error (none of the compatible fact table) after setting the content level aggregation on the dimension tables and the fact table. This error i get only when i try to pull the calculated item which is based on a attribute in the fact table. I have an attribute like year in the fact table i need to display like 'CY'||'2013' in a calculated logical column and when i pull this into answers i get this error -
1) joins are ok ; only one fact table and 3 dimension tables
2). content level on the fact table are specified at the detail level and also for the dimensions
any suggestions - thanks for your time

can anyone please provide some suggestions -
> i looked at the fact table LTS and specified the logical level for each dimension as the detail
> specified the LTS for each dimension table
> I have a column in my fact table which is calendar year and i want to have a derived column like rep_cal_year with 'CY'||cal_year - so when i pull this derived column in my answers i get the error - none of the fact tables are compatibile with the query;
what could be missign?

"None of the fact tables are compatible with the query request " error

I've got a situation where I have two facts(Fact_1, Fact_2) and three dimensions(dim_1,dim_2,dim_3) in 1 subject area. I've got dimension hierarchies setup for all the dimension tables.
Dim_1 is one to many to Fact_1
Dim_2 is one to many to Fact_2
Dim_3 is one to many to both Fact_1 and Fact_2
I've set up the content levels for the LTS for the Facts so that they are the lowest grain for dimensions they join to and the grand total grain for dimensions they do not join to.
My rpd is consistent. When I run a report using an attribute from Dim_3 and Dim_1 or Dim_3 and Dim_2, the report comes back fine.
But if I try to run a report using all three Dim tables, I get an error and the message "None of the fact tables are compatible with the query request ".
First of all, is it possible to make a report using all three dimensions?
Second, what's the best way to trouble shoot this error? Why are none of the fact tables compatible? I thought as long as the aggregation levels were set to grand total for non-shared dimensions, Answers would be able to create the report properly.
Any advise would be greatly appreciated.
Thanks!
-Joe

OBIEE is looking for a fact that can link ALL the dimensions together. This is also known as the implicit fact ... you don't have a fact that can relate all the dimensions - you have 2 facts that together they can. Perhaps you need to great a single logical fact that has both LTS for your physical facts and try it that way.
Then you'd have Dim1, Dim 2, Dim3 all being able to join to Fact1 (which is made of physical facts 1 & 2).

[SOLVED] Upgraded to GRUB2, none of the menu choices are bootable

Similar Messages

Maybe you are looking for