[SOLVED] Urxvt-256color shows no lineart or colors.

My rxvt-unicode terminal does display my prompt correctly. However, when I use rxvt-unicode-256color, it shows no line art or color on my prompt. Any help would be nice.
My .zshrc: http://db.tt/HyIdR4
My .Xdefaults: http://db.tt/GPAXQr
(The font cure is in artwiz-fonts from the AUR.)
Last edited by burninating__absol (2010-07-11 01:30:59)

I take it that solved your problem?
Mark as [SOLVED] by appending it to the title (edit the first post)
Thanks

Similar Messages

[SOLVED] urxvt colors and moc theme

Hello!
I am a KDE user and usually i am using Konsole. For some applications (like htop and moc) i use urxvt (patched version from AUR). The problem is in colors. When i launch moc in Konsole the theme colours are right but not in urxvt too. That happens with htop also. URxvt doesn't follow theme backrground color (uses its own) and foreground colors too.
Here is my .Xresource file:
! urxvt
! URxvt*termName: string
!URxvt*geometry: 80x40
! URxvt*chdir: string
! URxvt*reverseVideo: boolean
! URxvt*loginShell: boolean
! URxvt*jumpScroll: boolean
! URxvt*skipScroll: boolean
! URxvt*pastableTabs: boolean
! URxvt*scrollstyle: mode
URxvt*scrollBar: false
! URxvt*scrollBar_right: boolean
! URxvt*scrollBar_floating: boolean
! URxvt*scrollBar_align: mode
!URxvt*thickness: 20
! URxvt*scrollTtyOutput: boolean
! URxvt*scrollTtyKeypress: boolean
! URxvt*scrollWithBuffer: boolean
! URxvt*inheritPixmap: boolean
! URxvt*transparent: boolean
! URxvt*tintColor: color
! URxvt*shading: number
! URxvt*blurRadius: HxV
! URxvt*fading: number
! URxvt*fadeColor: color
! URxvt*utmpInhibit: boolean
! URxvt*urgentOnBell: boolean
! URxvt*visualBell: boolean
! URxvt*mapAlert: boolean
! URxvt*meta8: boolean
! URxvt*mouseWheelScrollPage: boolean
! URxvt*tripleclickwords: boolean
! URxvt*insecure: boolean
! URxvt*cursorUnderline: boolean
! URxvt*cursorBlink: true
! URxvt*pointerBlank: boolean
URxvt*background: #171717
URxvt*foreground: #B2B2B2
URxvt*color0: #171717
URxvt*color1: #3D3D3D
URxvt*color2: #ffffff
! URxvt*color3: color
! URxvt*color4: color
! URxvt*color5: color
! URxvt*color6: color
! URxvt*color7: color
! URxvt*color8: color
! URxvt*color9: color
! URxvt*color10: color
! URxvt*color11: color
! URxvt*color12: color
! URxvt*color13: color
! URxvt*color14: color
! URxvt*color15: color
! URxvt*colorBD: color
! URxvt*colorIT: color
! URxvt*colorUL: color
! URxvt*colorRV: color
! URxvt*underlineColor: color
! URxvt*scrollColor: color
! URxvt*troughColor: color
! URxvt*highlightColor: color
! URxvt*highlightTextColor: color
! URxvt*cursorColor: color
! URxvt*cursorColor2: color
! URxvt*pointerColor: color
! URxvt*pointerColor2: color
URxvt*borderColor: #171717
URxvt.font: xft:Ubuntu Mono:size=11
!URxvt*iconFile: /usr/share/icons/oxygen/128x128/apps/utilities-terminal.png
! URxvt*boldFont: fontname
! URxvt*italicFont: fontname
! URxvt*boldItalicFont: fontname
! URxvt*intensityStyles: boolean
! URxvt*inputMethod: name
! URxvt*preeditType: style
! URxvt*imLocale: string
! URxvt*imFont: fontname
! URxvt*title: string
! URxvt*iconName: string
! URxvt*saveLines: number
! URxvt*buffered: boolean
URxvt*depth: 32
! URxvt*visual: number
! URxvt*transient-for: windowid
! URxvt*override-redirect: boolean
! URxvt*hold: boolean
! URxvt*externalBorder: 20
! URxvt*internalBorder: 7
! URxvt*borderLess: true
! URxvt*lineSpace: number
! URxvt*letterSpace: number
! URxvt*skipBuiltinGlyphs: true
! URxvt*pointerBlankDelay: number
! URxvt*backspacekey: string
! URxvt*deletekey: string
! URxvt*print-pipe: string
! URxvt*modifier: modifier
! URxvt*cutchars: string
! URxvt*answerbackString: string
! URxvt*secondaryScreen: boolean
!URxvt*secondaryScroll: boolean
! URxvt*perl-lib: string
! URxvt*perl-eval: perl-eval
! URxvt*perl-ext-common: tabbed
! URxvt*perl-ext: string
! URxvt*iso14755: boolean
! URxvt*iso14755_52: boolean
! URxvt*xrm: string
! URxvt*keysym.sym: keysym
! URxvt*background.border: true
! URxvt*background.expr: string
! URxvt*background.interval: seconds
! URxvt*bell-command: string
! URxvt*matcher.button: string
! URxvt*matcher.launcher: string
! URxvt*matcher.launcher.*: string
! URxvt*matcher.pattern.*: string
! URxvt*matcher.rend.*: string
! URxvt*remote-clipboard.fetch: string
! URxvt*remote-clipboard.store: string
! URxvt*searchable-scrollback: string
! URxvt*selection-autotransform.*: string
! URxvt*selection-pastebin.cmd: string
! URxvt*selection-pastebin.url: string
! URxvt*selection.pattern-0: string
! URxvt*tab-bg: 1
! URxvt*tab-fg: 2
! URxvt*tabbar-bg: 0
! URxvt*tabbar-fg: colour
! URxvt*url-launcher: string
Moc config file:
# This is a configuration file for the MOC player. It should be named
# 'config' and placed in the ~/.moc directory. As this file can specify
# commands which invoke other applications, MOC will refuse to start if it
# is not owned by either root or the current user, or if it is writable by
# anyone other than its owner. All options are given with their default
# values, and therefore commented.
# Comments begin with '#'.
# You can use quotes and escape ('\') in parameters.
# You can have variable values substituted by enclosing the variable name
# as "${...}". (This only applies to the portion of the option following
# the ' ='.) Variables are substituted first from the environment then,
# if not found, from the configuration options. (Note that the value of
# a configuration option substituted is that which it has at the time the
# substitution variable is encountered.) If there is a naming conflict
# between an environment and configuration variable, you may be able to
# resolve it by using lowercase as the environment variable matches are
# case-sensitive whereas the configuration variables are not.
# You can also use the form "${...:-...}" where the value in the second
# position will be substituted if the variable name given in the first
# position is unset or null.
# So, for example:
# MusicDir = /music/${USER:-public}
# Fastdir1 = ${MusicDir}/mp3/rock
# Fastdir2 = ${MusicDir}/mp3/electronic
# Fastdir3 = ${MusicDir}/mp3/rap
# Fastdir4 = ${MusicDir}/mp3/etc
# Variable names are limited to those accepted by the BASH shell; that
# is, those comprising the upper- and lowercase ASCII characters, digits
# and the underscore.
# If you need to use the "${" sequence for any other purpose, write "$${"
# and it will be replaced by "${" and not treated as a substitution.
# Some options take lists of strings as their values. The strings are
# separated by colons. Additional strings can be appended to the list
# using "+ =" in place of a plain "=" to assign the value. For an example,
# see the XTerms option.
# You can override any configuration option when you run MOC using the
# '-O' command line option:
# mocp -O AutoNext =no -O messagelingertime=1 -O XTerms+=xxt:xwt
# This command line option can be repeated as many times as needed and
# the configuration option name is not case sensitive. (Note that MOC
# does not perform variable substitution on the value of such overridden
# configuration options.) Most option values are set before the
# configuration file is processed (which allows the new values to be
# picked up by substitutions), however list-valued options are overridden
# afterwards (which gives the choice of whether the configured values are
# replaced or added to).
# Remember that the client and server are separate processes and the
# server will retain the configuration values formed from the environment
# within which it was originally started.
# Show file titles (title, author, album) instead of file names?
#ReadTags = yes
# In which directory do you store your music files? If you specify it
# you will be able to jump straight to this directory with the '-m'
# parameter or the 'm' command. This can also point to a playlist.
# Example: MusicDir = "/home/joe/music"
#MusicDir = "My folder"
# Start in the music directory by default? If set to 'no', start
# in the current directory by default. A single directory on
# the command line takes precedence.
#StartInMusicDir = no
# How to sort? FileName is the option's only value for now.
#Sort = FileName
# Show errors in the streams (for example, broken frames in MP3 files)?
#ShowStreamErrors = no
# Ignore CRC errors in MP3 files? Most players do that, so the default
# value is 'yes'.
#MP3IgnoreCRCErrors = yes
# Set playback toggles.
#Repeat = no
#Shuffle = no
#AutoNext = yes
# Default FormatString:
# %n - Track number
# %a - Artist
# %A - Album
# %t - Title
# %(X:TRUE:FALSE) - Ternary expression: if X exists, do TRUE,
# otherwise FALSE. The escape character must
# be doubled (i.e., '\\'). (See zshmisc
# documentation for more information.)
#FormatString = "%(n:%n :)%(a:%a - :)%(t:%t:)%(A: $%A$:)"
# Input and output buffer sizes (in kilobytes).
#InputBuffer = 512 # Minimum value is 32KB
#OutputBuffer = 512 # Minimum value is 128KB
# How much to fill the input buffer before playing (in kilobytes)?
# This can't be greater than the value of InputBuffer. While this has
# a positive effect for network streams, it also causes the broadcast
# audio to be delayed.
#Prebuffering = 64
# Use this HTTP proxy server for internet streams. If not set, the
# environment variables http_proxy and ALL_PROXY will be used if present.
# Format: HTTPProxy = PROXY_NAME:PORT
#HTTPProxy =
# Sound driver - OSS, ALSA, JACK, SNDIO (on OpenBSD) or null (only for
# debugging). You can enter more than one driver as a colon-separated
# list. The first working driver will be used.
#SoundDriver = JACK:ALSA:OSS
# Jack output settings.
#JackClientName = "moc"
#JackStartServer = no
#JackOutLeft = "system:playback_1"
#JackOutRight = "system:playback_2"
# OSS output settings.
#OSSDevice = /dev/dsp
#OSSMixerDevice = /dev/mixer
#OSSMixerChannel1 = pcm # 'pcm', 'master' or 'speaker'
#OSSMixerChannel2 = master # 'pcm', 'master' or 'speaker'
# ALSA output settings.
#ALSADevice = default
#ALSAMixer1 = PCM
#ALSAMixer2 = Master
# Save software mixer state?
# If enabled, a file 'softmixer' will be created in '~/.moc/' storing the
# mixersetting set when the server is shut down.
# Note that there is a "hidden" 'Amplification' setting in that file.
# Amplification (0-200) is used to scale the mixer setting (0-100). This
# results in a higher signal amplitude but may also produce clipping.
#Softmixer_SaveState = yes
# Save equalizer state?
# If enabled, a file 'equalizer' will be created in '~/.moc/' storing the
# equalizer settings when the server is shut down.
# Note that there is a "hidden" 'Mixin' setting in that file.
# Mixin (0.0-1.0) is used to determine how much of the original signal is
# used after equalizing. 0 means to only use the equalized sound, while 1
# effectively disabled the mixer. The default is 0.25.
#Equalizer_SaveState = yes
# Show files with dot at the beginning?
#ShowHiddenFiles = no
# Hide file name extensions?
#HideFileExtension = no
# Show file format in menu?
#ShowFormat = yes
# Show file time in menu? Possible values: 'yes', 'no' and 'IfAvailable'
# (meaning show the time only when it is already known, which often works
# faster).
#ShowTime = IfAvailable
# Show time played as a percentage in the time progress bar.
#ShowTimePercent = no
# Values of the TERM environment variable which are deemed to be xterms.
#XTerms = xterm
#XTerms + = xterm-colour:xterm-color
#XTerms + = xterm-256colour:xterm-256color
#XTerms + = rxvt:rxvt-unicode
#XTerms + = rxvt-unicode-256colour:rxvt-unicode-256color
#XTerms + = eterm
# Theme file to use. This can be absolute path or relative to
# /usr/share/moc/themes/ (depends on installation prefix) or
# ~/.moc/themes/ .
# Example: Theme = laras_theme
Theme = yellow_red_theme
# The theme used when running on an xterm.
# Example: XTermTheme = transparent-background
#XTermTheme = yellow_red_theme
# Should MOC try to autoload the default lyrics file for an audio? (The
# default lyrics file is a text file with the same file name as the audio
# file name with any trailing "extension" removed.)
#AutoLoadLyrics = yes
# MOC directory (where pid file, socket and state files are stored).
# You can use ~ at the beginning.
#MOCDir = ~/.moc
# Use mmap() to read files. mmap() is much slower on NFS.
#UseMMap = no
# Use MIME to identify audio files. This can make for slower loading
# of playlists but is more accurate than using "extensions".
#UseMimeMagic = no
# Assume this encoding for ID3 version 1/1.1 tags (MP3 files). Unlike
# ID3v2, UTF-8 is not used here and MOC can't guess how tags are encoded.
# Another solution is using librcc (see the next option). This option is
# ignored if UseRCC is set to 'yes'.
#ID3v1TagsEncoding = WINDOWS-1250
# Use librcc to fix ID3 version 1/1.1 tags encoding.
#UseRCC = yes
# Use librcc to filenames and directory names encoding.
#UseRCCForFilesystem = yes
# When this option is set the player assumes that if the encoding of
# ID3v2 is set to ISO-8859-1 then the ID3v1TagsEncoding is actually
# that and applies appropriate conversion.
#EnforceTagsEncoding = no
# Enable the conversion of filenames from the local encoding to UTF-8.
#FileNamesIconv = no
# Enable the conversion of the xterm title from UTF-8 to the local encoding.
#NonUTFXterm = no
# Remember the playlist after exit?
SavePlaylist = yes
# When using more than one client (interface) at a time, do they share
# the playlist?
#SyncPlaylist = yes
# Choose a keymap file (relative to '~/.moc/' or using an absolute path).
# An annotated example keymap file is included ('keymap.example').
# Example: Keymap = my_keymap
#Keymap =
# Use ASCII rather than graphic characters for drawing lines. This
# helps on some terminals.
#ASCIILines = no
# FastDirs, these allow you to jump directly to a directory, the key
# bindings are in the keymap file.
# Examples: Fastdir1 = /mp3/rock
# Fastdir2 = /mp3/electronic
# Fastdir3 = /mp3/rap
# Fastdir4 = /mp3/etc
#Fastdir1 =
#Fastdir2 =
#Fastdir3 =
#Fastdir4 =
#Fastdir5 =
#Fastdir6 =
#Fastdir7 =
#Fastdir8 =
#Fastdir9 =
#Fastdir10 =
# How fast to seek (in number of seconds per keystroke). The first
# option is for normal seek and the second for silent seek.
#SeekTime = 1
#SilentSeekTime = 5
# PreferredDecoders allows you to specify which decoder should be used
# for any given audio format. It is a colon-separated list in which
# each entry is of the general form 'code(decoders)', where 'code'
# identifies the audio format and 'decoders' is a comma-separated list
# of decoders in order of preference.
# The audio format identifier may be either a filename extension or a
# MIME media type. If the latter, the format is 'type/subtype' (e.g.,
# 'audio/flac'). Because different systems may give different MIME
# media types, any 'x-' prefix of the subtype is ignored both here and
# in the actual file MIME type (so all combinations of 'audio/flac' and
# 'audio/x-flac' match each other).
# For Internet streams the matching is done on MIME media type and on
# actual content. For files the matches are made on MIME media type
# (if the 'UseMimeMagic' option is set) and on filename extension. The
# MIME media type of a file is not determined until the first entry for
# MIME is encountered in the list.
# The matching is done in the order of appearance in the list with any
# entries added from the command line being matched before those listed
# here. Therefore, if you place all filename extension entries before
# all MIME entries you will speed up MOC's processing of directories
# (which could be significant for remote file systems).
# The decoder list may be empty, in which case no decoders will be used
# for files (and files with that audio format ignored) while Internet
# streams will be assessed on the actual content. Any decoder position
# may contain an asterisk, in which case any decoder not otherwise listed
# which can handle the audio format will be used. It is not an error to
# list the same decoder twice, but neither does it make sense to do so.
# If you have a mix of audio and non-audio files in your directories, you
# may wish to include entries at top of the list which ignore non-audio
# files by extension.
# In summary, the PreferredDecoders option provides fine control over the
# type of matching which is performed (filename extension, MIME media
# type and streamed media content) and which decoder(s) (if any) are used
# based on the option's list entries and their ordering.
# Examples: aac(aac,ffmpeg) first try FAAD2 for AACs then FFmpeg
# mp3() ignore MP3 files
# wav(*,sndfile) use sndfile for WAV as a last resort
# ogg(vorbis,*):flac(flac,*) try Xiph decoders first
# ogg():audio/ogg() ignore OGG files, and
# force Internet selection by content
# gz():html() ignore some non-audio files
# Any unspecified audio formats default to trying all decoders.
# Any unknown (or misspelt) drivers are ignored.
# All names are case insensitive.
# The default setting reflects the historical situation modified by
# the experience of users.
#PreferredDecoders = aac(aac,ffmpeg):m4a(ffmpeg)
#PreferredDecoders += mpc(musepack,*,ffmpeg):mpc8(musepack,*,ffmpeg)
#PreferredDecoders += sid(sidplay2):mus(sidplay2)
#PreferredDecoders += wav(sndfile,*,ffmpeg)
#PreferredDecoders += wv(wavpack,*,ffmpeg)
#PreferredDecoders += audio/aac(aac):audio/aacp(aac):audio/m4a(ffmpeg)
#PreferredDecoders += audio/wav(sndfile,*)
# The following PreferredDecoders attempt to handle the ambiguity surrounding
# container types such as OGG for files. The first two entries will force
# a local file to the correct decoder (assuming the .ogg file contains Vorbis
# audio), while the MIME media types will cause Internet audio streams to
# be assessed on content (which may be either Vorbis or Speex).
#PreferredDecoders += ogg(vorbis,ffmpeg):oga(vorbis,ffmpeg):ogv(ffmpeg)
#PreferredDecoders += opus(opus,ffmpeg)
#PreferredDecoders += spx(speex)
#PreferredDecoders += application/ogg(vorbis):audio/ogg(vorbis)
# Which resampling method to use. There are a few methods of resampling
# sound supported by libresamplerate. The default is 'Linear') which is
# also the fastest. A better description can be found at:
# http://www.mega-nerd.com/libsamplerate/api_misc.html#Converters
# but briefly, the following methods are based on bandlimited interpolation
# and are higher quality, but also slower:
# SincBestQuality - really slow (I know you probably have an xx GHz
# processor, but it's still not enough to not see
# this in the top output :) The worst case
# Signal-to-Noise Ratio is 97dB.
# SincMediumQuality - much faster.
# SincFastest - the fastest bandlimited interpolation.
# And these are lower quality, but much faster methods:
# ZeroOrderHold - really poor quality, but it's really fast.
# Linear - a bit better and a bit slower.
#ResampleMethod = Linear
# Always use this sample rate (in Hz) when opening the audio device (and
# resample the sound if necessary). When set to 0 the device is opened
# with the file's rate.
#ForceSampleRate = 0
# By default, even if the sound card reports that it can output 24bit samples
# MOC converts 24bit PCM to 16bit. Setting this option to 'yes' allows MOC
# to use 24bit output. (The MP3 decoder, for example, uses this format.)
# This is disabled by default because there were reports that it prevents
# MP3 files from playing on some soundcards.
#Allow24bitOutput = no
# Use realtime priority for output buffer thread. This will prevent gaps
# while playing even with heavy load. The user who runs MOC must have
# permissions to set such a priority. This could be dangerous, because it
# is possible that a bug in MOC will freeze your computer.
#UseRealtimePriority = no
# The number of audio files for which MOC will cache tags. When this limit
# is reached, file tags are discarded on a least recently used basis (with
# one second resolution). You can disable the cache by giving it a size of
# zero. Note that if you decrease the cache size below the number of items
# currently in the cache, the number will not decrease immediately (if at
# all).
#TagsCacheSize = 256
# Number items in the playlist.
#PlaylistNumbering = yes
# Main window layouts can be configured. You can change the position and
# size of the menus (directory and playlist). You have three layouts and
# can switch between then using the 'l' key (standard mapping). By default,
# only two layouts are configured.
# The format is as follows:
# - Each layout is described as a list of menu entries.
# - Each menu entry is of the form:
# menu(position_x, position_y, width, height)
# where 'menu' is either 'directory' or 'playlist'.
# - The parameters define position and size of the menu. They can
# be absolute numbers (like 10) or a percentage of the screen size
# (like 45%).
# - 'width' and 'height' can have also value of 'FILL' which means
# fill the screen from the menu's position to the border.
# - Menus may overlap.
# You must describe at least one menu (default is to fill the whole window).
# There must be at least one layout (Layout1) defined; others can be empty.
# Example: Layout1 = playlist(50%,50%,50%,50%)
# Layout2 = ""
# Layout3 = ""
# Just one layout, the directory will occupy the whole
# screen, the playlist will have 1/4 of the screen size
# and be positioned at lower right corner. (Note that
# because the playlist will be hidden by the directory
# you will have to use the TAB key to make the playlist
# visible.)
# Example: Layout1 = playlist(0,0,100%,10):directory(0,10,100%,FILL)
# The screen is split into two parts: playlist at the top
# and the directory menu at the bottom. Playlist will
# occupy 10 lines and the directory menu the rest.
#Layout1 = directory(0,0,50%,100%):playlist(50%,0,FILL,100%)
#Layout2 = directory(0,0,100%,100%):playlist(0,0,100%,100%)
#Layout3 = ""
# When the song changes, should the menu be scrolled so that the currently
# played file is visible?
#FollowPlayedFile = yes
# What to do if the interface was started and the server is already playing
# something from the playlist? If CanStartInPlaylist is set to 'yes', the
# interface will switch to the playlist. When set to 'no' it will start
# from the last directory.
#CanStartInPlaylist = yes
# Executing external commands (1 - 10) invoked with key commands (F1 - F10
# by default).
# Some arguments are substituted before executing:
# %f - file path
# %i - title made from tags
# %S - start block mark (in seconds)
# %E - end block mark (in seconds)
# Data from tags can also be substituted:
# %t - title
# %a - album
# %r - artist
# %n - track
# %m - time of the file (in seconds)
# The parameters above apply to the currently selected file. If you change
# them to capital letters, they are taken from the file currently playing.
# Programs are run using execv(), not a shell, so you can't do things like
# redirecting the output to a file. The command string is split using blank
# characters as separators; the first element is the command to be executed
# and the rest are its parameters, so if you use "echo Playing: %I" we run
# program 'echo' (from $PATH) with 2 parameters: the string 'Playing:' and
# the title of the file currently playing. Even if the title contains
# spaces, it's still one parameter and it's safe if it contains `rm -rf /`.
# Examples: ExecCommand1 = "cp %f /mnt/usb_drive"
# ExecCommand2 = "/home/joe/now_playing %I"
#ExecCommand1 =
#ExecCommand2 =
#ExecCommand3 =
#ExecCommand4 =
#ExecCommand5 =
#ExecCommand6 =
#ExecCommand7 =
#ExecCommand8 =
#ExecCommand9 =
#ExecCommand10 =
# Display the cursor in the line with the selected file. Some braille
# readers (the Handy Tech modular series ZMU 737, for example) use the
# cursor to focus and can make use of it to present the file line even
# when other fields are changing.
#UseCursorSelection = no
# Set the terminal title when running under xterm.
#SetXtermTitle = yes
# Set the terminal title when running under screen.
#SetScreenTitle = yes
# Display full paths instead of just file names in the playlist.
#PlaylistFullPaths = yes
# The following setting describes how block markers are displayed in
# the play time progress bar. Its value is a string of exactly three
# characters. The first character is displayed in a position which
# corresponds to the time marked as the start of a block and the last
# character to the time marked as the end of the block. The middle
# character is displayed instead if both the start and the end of the block
# would fall in the same position (within the resolution of the interface).
# You can turn off the displaying of these block marker positions by using
# three space characters.
#BlockDecorators = "`\"'"
# How long (in seconds) to leave a message displayed on the screen.
# Setting this to a high value allows you to scroll through the messages
# using the 'hide_message' key. Setting it to zero means you'll have to
# be quick to see any message at all. Any new messages will be queued up
# and displayed after the current message's linger time expires.
#MessageLingerTime = 3
# Does MOC display a prefix on delayed messages indicating
# the number of queued messages still to be displayed?
#PrefixQueuedMessages = yes
# String to append to the queued message count if any
# error messages are still waiting to be displayed.
#ErrorMessagesQueued = "!"
# Self-describing ModPlug options (with 'yes' or 'no' values).
#ModPlug_Oversampling = yes
#ModPlug_NoiseReduction = yes
#ModPlug_Reverb = no
#ModPlug_MegaBass = no
#ModPlug_Surround = no
# ModPlug resampling mode.
# Valid values are:
# FIR - 8 tap fir filter (extremely high quality)
# SPLINE - Cubic spline interpolation (high quality)
# LINEAR - Linear interpolation (fast, good quality)
# NEAREST - No interpolation (very fast, extremely bad sound quality)
#ModPlug_ResamplingMode = FIR
# Other self-describing ModPlug audio characteristic options.
# (Note that the 32 bit sample size seems to be buggy.)
#ModPlug_Channels = 2 # 1 or 2 channels
#ModPlug_Bits = 16 # 8, 16 or 32 bits
#ModPlug_Frequency = 44100 # 11025, 22050, 44100 or 48000 Hz
#ModPlug_ReverbDepth = 0 # 0 (quiet) to 100 (loud)
#ModPlug_ReverbDelay = 0 # Delay in ms (usually 40-200ms)
#ModPlug_BassAmount = 0 # 0 (quiet) to 100 (loud).
#ModPlug_BassRange = 10 # Cutoff in Hz (10-100).
#ModPlug_SurroundDepth = 0 # Surround level 0(quiet)-100(heavy).
#ModPlug_SurroundDelay = 0 # Surround delay in ms, usually 5-40ms.
#ModPlug_LoopCount = 0 # 0 (never), n (times) or -1 (forever)
# Self-describing TiMidity audio characteristic options.
#TiMidity_Rate = 44100 # Between 8000 and 48000
#TiMidity_Bits = 16 # 8 or 16
#TiMidity_Channels = 2 # 1 or 2
#TiMidity_Volume = 100 # 0 to 800
# You can setup a TiMidity-Config-File here.
# Leave it unset to use library defaults (/etc/timidity.cfg mostly).
# Setting it to 'yes' also uses the library defaults.
# Set it to 'no' if you don't have any configuration file.
# Otherwise set it to the name of a specific file.
#TiMidity_Config =
# Self-describing SidPlay2 audio characteristic options.
#SidPlay2_DefaultSongLength = 180 # If not in database (in seconds)
#SidPlay2_MinimumSongLength = 0 # Play at least n (in seconds)
#SidPlay2_Frequency = 44100 # 4000 to 48000
#SidPlay2_Bits = 16 # 8 or 16
#SidPlay2_Optimisation = 0 # 0 (worst quality) to 2 (best quality)
# Set path to a HVSC-compatible database (if not set, database is disabled).
#SidPlay2_Database =
# SidPlay2 playback Mode:
# "M": Mono (best for many SIDs)
# "S": Stereo
# "L"/"R": Left / Right
#SidPlay2_PlayMode = "M"
# Use start-song information from SID ('yes') or start at first song
# ('no'). Songs before the start-song won't be played. (Note that this
# option previously took the values 1 and 0; these are now deprecated
# in favour of 'yes' and 'no'.)
#SidPlay2_StartAtStart = yes
# Play sub-tunes. (Note that this option previously took the values 1
# and 0; these are now deprecated in favour of 'yes' and 'no'.)
#SidPlay2_PlaySubTunes = yes
# Run the OnSongChange command when a new song starts playing.
# Specify the full path (i.e. no leading '~') of an executable to run.
# Arguments will be passed, and you can use the following escapes:
# %a artist
# %r album
# %f filename
# %t title
# %n track
# %d file duration in XX:YY form
# %D file duration, number of seconds
# No pipes/redirects can be used directly, but writing a shell script
# can do the job.
# Example: OnSongChange = "/home/jack/.moc/myscript %a %r"
#OnSongChange =
# If RepeatSongChange is 'yes' then MOC will execute the command every time
# a song starts playing regardless of whether or not it is just repeating.
# Otherwise the command will only be executed when a different song is
# started.
#RepeatSongChange = no
# Run the OnStop command (full path, no arguments) when MOC changes state
# to stopped (i.e., when user stopped playing or changes a song).
#OnStop = "/home/jack/.moc/myscript_on_stop"
# This option determines which song to play after finishing all the songs
# in the queue. Setting this to 'yes' causes MOC to play the song which
# follows the song being played before queue playing started. If set to
# 'no', MOC will play the song following the last song in the queue if it
# is in the playlist. The default is 'yes' because this is the way other
# players usually behave. (Note that this option previously took the
# values 1 and 0; these are now deprecated in favour of 'yes' and 'no'.)
#QueueNextSongReturn = yes
I read wiki but didn't find anything useful. Thanks for any info.
Last edited by Shark (2014-12-17 12:31:30)

bleach wrote:
i see these
URxvt*background: #171717
URxvt*foreground: #B2B2B2
URxvt*color0: #171717
URxvt*color1: #3D3D3D
URxvt*color2: #ffffff
are not commented out
3d3d3d is for red but you have a blackish and color2 is for green but you have it white the rest should be the default colors. it uses the same colors only it changes the vairiant of the color you choice there or normally moc uses colors such as green blue and such which will call your console colors for those respective fields I know moc has /user/share/moc/themes/ that you can edit or make your own for instance copy one and edit it. I think htop uses the same color count which is 8 but with so green will be white when you use urxvt. 8 for normal colors 16 for bright dark and urxvt is 256 which is 16 but can use any of the 256 colors for 16.
just to clarify you have commented out your colors 4-15 and your green and red is weird, and htop aswell as moc is 8 bit. moc theme_yellow_red is default for background so it will use urxvts background
Haahaha, that is simple. And it works!!!
I didn't bother with commenting that because i thought they are not applied. Anyway, thanks man. My urxvt terminal si grateful to you and your thorough explanation. SOLVED!

Some images are showing with some red color ¿how do I return to original colors?

I`m using Mountain Lion and everything works right. Only some images are showing with a redish color. The first example is my cover photo in fb. When I click it, it returns to the original color. Anyone who has this problem and know how to fix it?
This is fb cover preview:
This is the original, when cliked:
It happens with some thumbnails too.

Hi Klaus,
this didn't solve my problem but helped me choose Firefox over Safari.
thanks for the reply.
mark

How i can solve proble whenprinter showing ofline

how i can solve proble whenprinter showing ofline

Hello there! Welcome to the forums @khanmahmed
I read your post about your printer showing offline on your Windows XP system, and I would like to help.
Click this link and follow all of the messages to help get your printer back online and printing again.
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print
I hope this helps, let me know the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

[SOLVED] Youtube Video showing up on every window I open?

Hello all, I'm getting this strange error. A youtube video (Appearing as it does before you click the play button when it is embedded) is showing up in every window I open (of any sort, it even shows up on games like minecraft) before that part of the window is filled with the actual program or image I am trying to load. It also seems to show up on black colors afterward. I'm completely lost here, any ideas?
Last edited by parkermcg (2012-05-13 22:48:52)

NVidia Geforce GT 540M
Spectrwm
What is other relevant data?
Yes, my system is up to date, and it only seemed to do it starting last night. It wasnt uptodate before this morning though.
I've realized it also shows up in the top left corner over anything black.
Last edited by parkermcg (2012-05-13 22:42:38)

My color picker in Illustrator 18.1.0 is broken. It is a solid red bar instead of showing all of the colors. Any ideas?

Color picker bar on illustrator cc is broken. It is a solid red block instead of showing all of the colors.

Falcon Design,
It seems that the issue is caused by a corrupt folder called en_US or similar (depending on language) within the Adobe Illustrator 18 Settings folder, see post #7 by Jules in this thread,
https://forums.adobe.com/thread/1595766
so the solution should be to move or rename that folder (or the whole Adobe Illustrator 18 Settings folder).
You can find the folder in Move the folder (follow the link with that name) with Illy closed.
As a temporary roundabout way, you can select the lower rectangle to the right of the rainbow and DoubleClick to apply that to change the top rectangle and the values: the lower colour is the right one.

Some pictures show up with incorrect colors

some pictures show up with incorrect colors(eg. a person with green skin), and on Yahoo mail, the background which is supposed to be blue shows up as pink, as does the place where a user avatar would be.

This can be caused by a problem with the color profile for your display monitor or color profiles embedded in images.<br />
You can disable color management to test that.<br />
You can set the pref gfx.color_management.mode to 0 on the about:config page to disable Color Management.<br />
You need to close and restart Firefox or maybe even reboot the computer to make the change effective.<br />
See http://kb.mozillazine.org/gfx.color_management.mode
See https://developer.mozilla.org/En/ICC_color_correction_in_Firefox

How do you print a Page document that will show your highlights in color say yellow

how do you print a Page document that will show your highlights in color say yellow

Let me guess you are not on OSX (10.6.5), which means you are using which version of Pages?
Peter

[SOLVED] tmux ncmpcpp showing solid colors

I noticed this happening after I switched from xterm to urxvt, and it ONLY happens in urxvt. THIS is what is happening and only happens while scrolling. Any ideas as to what's going on?
Last edited by Squiddles (2012-03-21 07:14:56)

Squiddles wrote:Oh man. I don't even know why, but I had "TERM=xterm-256colors" in my .bashrc. Anyways, now tmux dislpays "screen" and plain displays "rvxt-unicode-256color" and the color fills are no more in ncmpcpp! Thanks!
No problem: please remember to mark the thread as solved. (It might also help to edit the title and stick tmux in there in terms of searchability).
While I'm here, I might as well ask: Should I be setting TERM manually anywhere at all? And should I be setting $TERM to something to remove any chance of other compatibility breaks? It looks like leaving it this way would prevent that.
No. Set it in your tmux.conf as per the man page quoted above. Let your terminal and terminfo handle it outside tmux - that will avoid any "irregularities".

[SOLVED] urxvt has stopped showing accents

Hello,
Quite suddenly (to me) urxvt has stopped showing á, é, í, ñ and the like. They worked yesterday, and they still work in console and xterm -- the latter uses a different font, but the former does not.
The relevant section of .Xresources:
URxvt.font: -*-terminus-medium-*-*-*-*-140-*-*-*-*-iso8859-1
URxvt.boldFont: -*-terminus-bold-*-*-*-*-140-*-*-*-*-iso8859-1
and the whole /etc/vconsole.conf:
KEYMAP="es"
FONT=ter-114n
#FONT_MAP=8859-1_to_uni
FONT_MAP=8859-1
Is anyone seeing anything strange? The only relevant change I can think of is that I have removed initscripts. I've been using systemd for some weeks and (I thought) the package was just there sitting idly. Maybe it wasn't.
Manolo
Last edited by manolomartinez (2012-08-17 01:10:12)

I'm also experiencing this after the switch to systemd.
~/.Xdefaults
urxvt*boldFont: -misc-fixed-bold-r-normal--14-130-75-75-c-70-iso10646-1
urxvt*font: -misc-fixed-medium-r-normal--14-130-75-75-c-70-iso10646-1
/etc/vconsole.conf
KEYMAP=br-abnt2.map.gz
FONT=
FONT_MAP=
Maybe this has something to do with locale settings?
/etc/locale.conf
LANG=en_US.UTF-8
LC_COLLATE=C

Jpeg file in the email showing only in black color.. how to solve this problem?

pls help!!
ohya.. i am using ipad 2

This code works ie. generates logs with sql result - slightly modified to be runable:
#!/bin/bash
LOGDIR=/tmp
ORATABFILE=/etc/oratab
cat $ORATABFILE | while read LINE
do
case $LINE in
\#*) ;; #comment-line in oratab
ORACLE_SID=`echo $LINE | awk -F: '{print $1}' -`
if \[ -z $ORACLE_SID \] ; then
# NULL SID - ignore
ORACLE_SID=""
continue
# Proceed only if last field is 'Y'
else
ORACLE_HOME=`echo $LINE | awk -F: '{print $2}' -`
PATH=$ORACLE_HOME/bin:/bin:/usr/bin:/etc
export ORACLE_SID ORACLE_HOME PATH
LOGFILE=$LOGDIR/check_$ORACLE_SID.log
touch $LOGFILE
#echo $LOGFILE
$ORACLE_HOME/bin/sqlplus -s "/ as sysdba" << EOF > $LOGFILE
select * from global_name;
exit
EOF
fi
esac
done

[SOLVED] urxvt/console spanish characters

i didn't bother with this "issue" i have, because rarely i type something in spanish (my native language) in urxvt, but lately i had to use msn a lot, (yeah i hate it too, but here people use that... and facebook) so, i have to use a lot the "n" and "a,e,i,o,u" characters, the thing is, i have no problem in X apps typing those characters as you can see, but in console and urxvt i can see the "a,e,i,o,u" characters, but i cannot type them, for example, if a text file has them, i can see them in vim, but im not able to type them, but the "n" character i cannot see neither in console nor urxvt, cant see it and cannot type it, only a "?" when it is displayed...
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="es_AR.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="America/Argentina/Buenos_Aires"
KEYMAP="es"
CONSOLEFONT=""
CONSOLEMAP="es"
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq mii r8169 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd !snd-pcsp snd-hda-intel soundcore r8180 uvcvideo joydev cups usblp)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="aleyscha"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
wlan0="wlan0 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(Link)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond @hal @cpufreq @alsa @gpm @sensors @wicd @bitlbee)
locale -a output:
[aleyscha@aleyscha 90 ~ 09:35]$ locale -a
C
POSIX
en_US
en_US.iso88591
en_US.utf8
es_AR
es_AR.iso88591
es_AR.utf8
.bashrc:
PS1='\033[?17;0;127c[\u@\h \# \W \A]\$ '
# stop blinking cursor in console
#if [ $TERM = 'linux' -a $SHELL = '/bin/bash' ] ; then
# PS1='\033[?17;0;40c[\u@\h \# \W \A]\$ '
#else PS1='[\u@\h \# \W \A]\$ '
#fi
### Paths ###
PATH=$PATH:${HOME}/bin
export CDPATH=.:/sda4/Video:/sda4/Audio/Music:/sda4/Movies:/sda4/downloads
export PATH=$PATH:/usr/local/bin:/bin:/usr/bin:/sbin:/usr/sbin
export LC_ALL=C
export PAGER=less
export EDITOR=vim
export HISTCONTROL="ignoredups"
export MOZ_DISABLE_PANGO=1
HISTFILE=~/.history
HISTSIZE=4000
SAVEHIST=2000
### autocorrects cd misspellings, 'cd /sur/src/linus' >> 'cd /usr/src/linux' ###
shopt -s cdspell
### Aliases ###
alias hi="history"
alias mountsdd="sudo mount /dev/sdd1 /sdd1"
alias lsl="ls -l --group-directories-first --color=auto -F" #ls -l --group-directories-first --time-style=+"%Y-%m-%d %H:%M" --color=auto -F
alias ls="ls --group-directories-first --color=auto -F" #ls --group-directories-first --time-style=+"%Y-%m-%d %H:%M" --color=auto -F
alias pacman="sudo pacman"
alias y="yaourt -Syu --aur"
alias yy="yes | yaourt -Syu --aur"
alias x="startx"
alias get_log="sudo tail -f /var/log/everything.log"
alias root="sudo su"
alias Reboot="sudo reboot"
alias Shutdown="sudo shutdown -h now"
alias cp="cp -vi"
alias mv="mv -vi"
alias du="du -h"
alias df="df -h"
alias isoinfo="isoinfo -d -i"
alias log_everything="sudo tail -f /var/log/everything.log"
alias isolist="isoinfo -f -i"
alias mocp="mocp -T orpheus"
alias lsdev="ls /dev | grep sd"
alias lsuuid="ls -l /dev/disk/by-uuid/"
alias sync="rsync -r -n -t -p -o -g -v --progress --delete -l"
alias gmail="elinks www.gmail.com"
alias getlive="GetLive --config-file .getliverc"
alias irssi="irssi -n lean2501"
alias Wget="wget -P /sda4/downloads"
alias compilei686="gcc -march=athlon -O2 -pipe -fomit-frame-pointer"
alias compile="gcc -O2 -Wall -pedantic"
alias diskcheck="e2fsck -v"
alias colem32="~/bin/colem/colem32"
alias vgb="~/bin/vgb/vgb"
alias vgba="~/bin/vgba/vgba32"
alias ines="~/bin/ines/ines32"
alias clamclean="clamscan --recursive --infected --bell --remove /sda4/downloads/"
alias cdo="eject /dev/cdrom"
alias cdc="eject -t /dev/cdrom"
alias mx="chmod a+x"
alias 000="chmod 000"
alias 644="chmod 644"
alias 755="chmod 755"
alias resreset="xrandr --size 1024x600"
alias :q="exit"
alias pebrot="pebrot 2> /dev/null"
alias mplayfb="mplayer -zoom -x 1024 -y 600"
alias cplay="cplay /sda4/Audio/Music/"
alias strace="strace -e trace=file"
alias vifm="vifm ~ /sda4/downloads/"
alias doom="chocolate-doom -iwad /sda4/bin/remakes/ID/DOOM.WAD"
alias doom2="chocolate-doom -iwad /sda4/bin/remakes/ID/DOOM2.WAD"
alias heretic="chocolate-heretic -iwad /sda4/bin/remakes/ID/HERETIC.WAD"
alias hexen="chocolate-hexen -iwad /sda4/bin/remakes/ID/HEXEN.WAD"
### Functions ###
function aurget {
cd ~/bin/arch_packages
wget "http://aur.archlinux.org/packages/$1/$1.tar.gz" -O - | tar xzf -
cd $1
# mkmv - creates a new directory and moves the file into it, in 1 step
# Usage: mkmv <file> <directory>
mkmv() {
mkdir "$2"
mv "$1" "$2"
# nh - run command detached from terminal and without output
# Usage: nh <command>
nh() {
nohup "$@" &>/dev/null &
### Bash Completion ###
if [ -f /etc/bash_completion ]; then
. /etc/bash_completion
fi
### Screen Function Retach/list :: s ###
function s {
if [[ $1 ]]; then
screen -r $1
else
screen -ls
fi
### Screen Function Init_w/title / Init :: S ###
function S {
if [[ $1 ]]; then
screen -S $1
else
screen -ls
fi
### Screen Function Mirror/List :: sx ###
function sx {
if [[ $1 ]]; then
screen -x $1
else
screen -ls
fi
### Screen Function Mirror in terminal :: scr ###
function scr {
#case $TERM in
# xterm*|rxvt*)
if screen -ls | grep -q Main; then
screen -xr Main
else
screen -S Main
fi
#esac
### dtach function ###
function detach {
if [ -S /tmp/$1.dtach ]; then
dtach -a /tmp/$1.dtach
else
dtach -c /tmp/$1.dtach $1
fi
### Extract Archives ###
extract () {
if [ -f $1 ] ; then
case $1 in
*.tar.bz2) tar xjvf $1 ;;
*.tar.gz) tar xzvf $1 ;;
*.bz2) bzip2 -d $1 ;;
*.rar) unrar2dir $1 ;;
*.gz) gunzip $1 ;;
*.tar) tar xf $1 ;;
*.tbz2) tar xjf $1 ;;
*.tgz) tar xzf $1 ;;
*.zip) unzip2dir $1 ;;
*.Z) uncompress $1 ;;
*.7z) 7z x $1 ;;
*.ace) unace x $1 ;;
*) echo "'$1' cannot be extracted via extract()" ;;
esac
else
echo "'$1' is not a valid file"
fi
#bu - Back Up a file. Usage "bu filename.txt"
bu () { cp $1 ${1}-`date +%Y%m%d%H%M`.backup ; }
if [ "$TERM" = "linux" ]; then
echo -en "\e]P0222222" #black
echo -en "\e]P8222222" #darkgrey
echo -en "\e]P1803232" #darkred
echo -en "\e]P9982b2b" #red
echo -en "\e]P25b762f" #darkgreen
echo -en "\e]PA89b83f" #green
echo -en "\e]P3aa9943" #brown
echo -en "\e]PBefef60" #yellow
echo -en "\e]P4324c80" #darkblue
echo -en "\e]PC2b4f98" #blue
echo -en "\e]P5706c9a" #darkmagenta
echo -en "\e]PD826ab1" #magenta
echo -en "\e]P692b19e" #darkcyan
echo -en "\e]PEa1cdcd" #cyan
echo -en "\e]P7ffffff" #lightgrey
echo -en "\e]PFdedede" #white
clear #for background artifacting
fi
thanks for read!
Last edited by leo2501 (2009-05-07 10:45:29)

well... problem solved... the secret was...
in /etc/rc.conf
LOCALE="es_AR.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="America/Argentina/Buenos_Aires"
KEYMAP="es"
CONSOLEFONT=""
CONSOLEMAP=""
USECOLOR="yes"
in .bashrc
export LC_ALL=en_US.utf8 #for arch to show all interactive messages in english instead of spanish (argentina)
or in .profile
export LC_MESSAGES=en_US.utf8
now i can see and type spanish chars in urxvt

[SOLVED] urxvt doesn't display correctly some special characters

Hello everyone,
I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
Here is a comparison between xfce4-terminal and rxvt-unicode (I used theses characters as exemple):
xfce4-terminal :
urxvt :
And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
!Font
URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
!General
URxvt.scrollBar: false
URxvt*imLocale: fr_CH.UTF-8
URxvt.saveLines: 5000
URxvt.geometry: 95x26+50+50
Has someone an idea what the problem could be?
Thank's in advance.
Last edited by mwm (2013-11-13 13:15:48)

This is what I think is happpening.
PragmataPro may not contain those glyphs. It appears to have a wide array of glyphs but it is not unicode complete.
Xfce-terminal is a vte terminal. When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font. Urxvt will only use the glyphs in the font or fonts specified. If PragmataPro does not contain the glyphs, urxvt will display boxes.
You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify. Here's an example from my urxvt configs:
urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
xft:WenQuanYi Bitmap Song:size=8, \
xft:FreeSerif:style=Regular, \
xft:unifont:style=Medium:antialias=false
I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me. This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

[SOLVED] URxvt doesn't allow tabs to be opened as regular user

I recently had my file system become corrupted as was forced to restore 2 week old backup, after configuring the backup and booting into the system I fired up urxvt opened journalctl -f. When I tried to open a new tab I got this error:
Jan 05 01:49:07 thinkpad slim[431]: urxvt: can't fork, aborting.
Jan 05 01:49:07 thinkpad slim[431]: urxvt: error while initializing new terminal instance at /usr/lib/urxvt/urxvt.pm line 1125.
One thing I have noticed is if I make the window larger I can sometimes get 2 tabs before the error shows, if I make it fullscreen I get 1 tab and if I leave it unchanged I can get 3 tabs. If I su - and fire it up I can get tabs to my hearts content.
Figuring this was an issue specific to my user I created a new user and have the same issue.
x86_64
3.7.1-3-ck
fluxbox
My .Xdefaults
urxvt.geometry:90x25
urxvt.scrollBar: false
urxvt.saveLines: 10000000000000000
urxvt.foreground: white
urxvt*termName: rxvt-256color
urxvt*transparent: true
urxvt.depth: 32
urxvt.font: 7x14
urxvt.background: [85]#000000
urxvt.perl-ext-common: default,tabbed,matcher
urxvt.url-launcher: /usr/bin/chromium
urxvt.matcher.button: 1
The system is 100% up to date as of this posting.
Last edited by gehidore (2013-01-06 18:23:28)

xamaco wrote:Starting with urxvt 9.16, several change have happened. Among other things :
perl-ext-common has been replaced by perl-ext
url-launcher replaced by urxvt-url-launcher
See man urxvt-extensions and http://dist.schmorp.de/rxvt-unicode/Changes
Looking at the latter I see this:
- INCOMPATIBLE CHANGE: renamed urlLauncher resource to url-launcher.
- fix processing of DEC private mode save sequences (patch by Patrick
Hemmer).
Which doesn't seem to apply to my issue, and is a change from "urlLauncher to url-launcher" which I already use, and already works.
I have changed the perl-ext-common to perl-ext Nothing has changed.
Again the strange part about this for me is that opening a root rxvt window from su - tabs function 100% fine.

[Solved] URXVT cannot display Japanese Characters

Solved:
I had a typo in my locale.conf, setting to an invalid locale - apparently that did it.
Thanks for the help!
Hi everybody!
I just now re-installed Arch because I switched hard-drives (to an SSD) and everything seems to be working again, apart from one thing:
urxvt doesn't display Japanese Characters, just questionmarks instead when using ls and garbage characters otherwise.
I literally copied and pasted my ~/.Xresources from my old install, so I'm not quite sure what went wrong.
This is said file:
Urxvt.urgentOnBell: True
urxvt*cursorBlink: false
!urxvt*internalBorder: 0
!urxvt*externalBorder: 0
URxvt*.depth: 32
URxvt*.background: [85]#000000
! URxvt.scrollstyle: plain
URxvt.scrollBar: false
URxvt.foreground: grey
! red
URxvt.color1: #CC0000
URxvt.color9: #B33838
! blue
URxvt.color4: #3465A4
URxvt.color12: #729FCF
! yellow
Urxvt.color3: #b48363
URxvt.color11: #d49b4e
!URxvt.font: 8x13
urxvt*font: xft:DejaVu Sans Mono:size=8:antialas=true,xft:Kochi Gothic:size=8
This is what fc-list has to say:
% fc-list | grep "Kochi\|DejaVuSansMono"
/usr/share/fonts/TTF/DejaVuSansMono.ttf: DejaVu Sans Mono:style=Book
/usr/share/fonts/TTF/kochi-mincho-subst.ttf: Kochi Mincho,æ±é¢¨ææ:style=Regular,æ¨æº
/usr/share/fonts/TTF/kochi-gothic-subst.ttf: Kochi Gothic,æ±é¢¨ã´ã·ãã¯:style=Regular,æ¨æº
/usr/share/fonts/TTF/DejaVuSansMono-Oblique.ttf: DejaVu Sans Mono:style=Oblique
/usr/share/fonts/TTF/DejaVuSansMono-Bold.ttf: DejaVu Sans Mono:style=Bold
/usr/share/fonts/TTF/DejaVuSansMono-BoldOblique.ttf: DejaVu Sans Mono:style=Bold Oblique
I already tried re-installing the fonts and I also tried out alternative fonts, but nothing seems to work.
All the other settings from the ~/.Xresources file are applied perfectly, so I'm not quite sure where to look for the error.
My browser (dwb) displays japanese characters just fine.
Any help is greatly appreciated
Edit: I just realized that urxvt seems to completely ignore the fonts line - I had that problem once before, when I used the AMD Catalyst driver and not the open source one.
I now have an Nvidia card and started using the propietary driver - maybe that has something to do with it?
Last edited by lorizean (2013-12-02 13:16:14)

Works here:
URxvt*depth: 32
URxvt*buffered: true
URxvt*termName: rxvt-256color
URxvt.font: xft:Terminus:pixelsize=12:antialias=false
urxvt.imLocale: pl_PL.ISO8859-2
What's the output of 'localectl'?

[SOLVED] Urxvt-256color shows no lineart or colors.

Similar Messages

Maybe you are looking for