[SOLVED] USB on VirtualBox guest (windows 7)

hey,
- installed win7 inside vbox
- installed vbox guest additions
- installed vbox extension pack (via aur)
- i am in vboxusers group
- relogged
i plug in usb thumb drive, but usb icon in bottom left is still gray - i right click it and see that the device (verbatim clip) is listed and unchecked. if i left click it, i have a checkmark, i see windows is searching for drivers but it gives an error. thumb drive is not listed in removable devices nor my computer.
- i add a line from troubleshooting wiki in /etc/fstab
none /proc/bus/usb usbfs auto,busgid=108,busmode=0775,devgid=108,devmode=664 0 0
- i also added a line in .bashrc
VBOX_USB=usbfs
- rebooted, still nothing
ideas?
Last edited by developej (2013-01-13 10:33:48)

That fstab line is an old workaround, that's probably not good anymore. And the ~/.bashrc line... I have no idea what it's supposed to do.
Are you in the storage group?
Did you enable USB 2.0 from VirtualBox's settings screen?
You need to plug in the USB stick and also "plug" it in the VM. Windows asking for USB drivers is a bit odd (especially Windows 7, which takes up a heck of a lot more than Windows XP).
Last edited by DSpider (2013-01-13 09:47:55)

Similar Messages

[SOLVED] xmonad on virtualbox guest does not work

I'm trying to install xmonad on an arch guest in virtualbox.
I'm referencing both the Beginner's Guide and the VirtualBox doc. The beginner's guide says to install X a different way and points the virtualbox guide, which doesn't mention X.
So here's what I do:
$ pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils virtualbox-archlinux-additions mesa
$ modprobe -a vboxguest vboxsf vboxvideo
Looking online, I get the impression that virtualbox-archlinux-additions includes a video driver, so I don't install one (not sure which driver would work anyways).
After installing "xorg-twm xorg-xclock xterm dbus" startx works. However, when I exit, the output says something about pixman: 0.24.0 and complains
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) AIGLX error: vboxvideo does not export required DRI extension
(EE) AIGLX: reverting to software rendering
(EE) VirtualBox USB Tablet: failed to initialize for relative axes
xinit: connection to X server lost
There is no default ~/.xinitrc (it does not exist)
I then install xmonad and xmonad-contrib. There is no default ~/.xmonad/xmonad.hs
I then do
$ cp /etc/skel/.xinitrc .
Then I append "xmonad" (I also tried exec xmonad) and run "startx" and I get a black screen that hangs. I can't quit the environment, so I'm forced to close the virtual machine. Adding ~/.xmonad/xmonad.hs doesn't help either.
Can someone tell me what's going on? Am I missing a video driver?
Last edited by whotemp (2011-12-09 07:02:46)

Hmm, so I now get:
$ xmonad
xmonad-i386-linux: user error (openDisplay)
with
$ cat ~/.xmonad/xmonad.hs
import XMonad
main = xmonad $ defaultConfig

[SOLVED]Can't install Virtualbox-guest-utils[SOLVED]

sudo pacman -S virtualbox-guest-utils
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: catalyst-utils: requires xorg-server<1.17.0
What to do ?
Last edited by heldiho53 (2015-03-06 14:57:58)

You can install an older version of virtualbox-guest-utils.
You can wait for catalyst to support xorg-server 1.17 and install virtualbox-guest-utils only then.
You can change graphics drivers to the FLOSS ones and install xorg-server 1.17 and virtualbox-guest-utils.

[solved] Virtualbox guest additions stopped working

Hi,
I got some trouble after an upgrade of kernel yesterday. Virtualbox guest additions doesn't work any longer, and I have tried both downgrading virtualbox-guest-additions and the new linux that got pushed yesterday, but it's still not working.
Is there some know issue related to this?
Do anyone have information on how to trace errors with Virtualbox, or any guide on how to fix this.
I have also tried a reinstall of the modules without success.
Thanks.
Last edited by grrrm (2014-10-08 15:45:45)

Suddenly it worked

[SOLVED] no sound in Arch virtualbox guest

I had no sound in an Arch virtualbox guest. The fix (original link below) was to use the alsa97 option in virtualbox settings and then to add
options snd-intel8x0 ac97_clock=48000
to
/etc/modprobe.d/alsa-base.conf
Here is the link to where I read about this fix: http://www.withoutthesarcasm.com/fixing … irtualbox/
Last edited by mek42 (2014-09-14 14:21:16)

I mucked around with alsa mixer and muted a channel and now I have sound. However, when I run:
speaker-test -c 6
the app cycles through my speakers, however sound comes out of all the speakers at once for the individual channels front left and front right. I do not get any sound out of either of the rears or the center. I double checked alsa mixer and all the volumes are turned up.
Is there a way I can get arch to send sound to the correct speakers?
--nixIT

Error installing VirtualBox Guest Additions

Hello. ¿Cuál es el motivo por el cual a la hora de instalar VirtualBox Guest Additions me sale lo siguiente?
(1) 0 - ENTER: DriverPackageInstallW
(1) 0 - Installing INF file 'C:\Program Files\Oracle\VirtualBox Guest Additions\VBoxGuest.inf' (Plug and Play).
(1) 0 - Looking for Model Section [VBoxGuest.NTamd64]...
(1) 0 - No matching devices found in INF "C:\Windows\System32\DriverStore\FileRepository\vboxguest.inf_amd64_neutral_08c563e3b006bb64\vboxguest.inf" on the Machine.
(1) 0 - No drivers installed. No devices found that match driver(s) contained in 'C:\Windows\System32\DriverStore\FileRepository\vboxguest.inf_amd64_neutral_08c563e3b006bb64\vboxguest.inf'.
(1) 0 - RETURN: DriverPackageInstallW (0xE000020B)
How I can solve this installation error?

2898527 wrote:
I was installing VirtualBox Guest Additions, and install gives me the following installation error:
(1) 0 - ENTER: DriverPackageInstallW
(1) 0 - Installing INF file 'C:\Program Files\Oracle\VirtualBox Guest Additions\VBoxGuest.inf' (Plug and Play).
(1) 0 - Looking for Model Section [VBoxGuest.NTamd64]...
(1) 0 - No matching devices found in INF "C:\Windows\System32\DriverStore\FileRepository\vboxguest.inf_amd64_neutral_08c563e3b006bb64\vboxguest.inf" on the Machine.
(1) 0 - No drivers installed. No devices found that match driver(s) contained in 'C:\Windows\System32\DriverStore\FileRepository\vboxguest.inf_amd64_neutral_08c563e3b006bb64\vboxguest.inf'.
(1) 0 - RETURN: DriverPackageInstallW (0xE000020B)
How is it possible that mistake, and how could I fix it?
Regards,
--Alejandro
You just repeated your original post with no additional information.
SPECIFICALLY, how were installing Guest Additions? What SPECIFIC steps did you take? Where, SPECIFICALLY, did you find the messages you posted?

[SOLVED] Can't see my windows network anymore

I just updated my Arch 64 machine today (hadn't updated since last friday). I saw that the new kernel 2.6.38 was in core now etc. The update went fine but now in Dolphin I can't see my windows shares anymore. I complains about the firewall, so I turned it off but still it does see anything. Anybody else having issues with smb since the last few days of updates?
Last edited by fettouhi (2012-02-22 17:39:17)

I looked at what I installed on my machine yesterday morning when I started having those smb issues
[2011-04-12 09:25] starting full system upgrade
[2011-04-12 09:28] upgraded bluez (4.90-1 -> 4.91-1)
[2011-04-12 09:28] upgraded bzr (2.3.0-1 -> 2.3.1-1)
[2011-04-12 09:28] upgraded imagemagick (6.6.9.1-1 -> 6.6.9.4-1)
[2011-04-12 09:28] upgraded calibre (0.7.53-1 -> 0.7.54-1)
[2011-04-12 09:28] upgraded xproto (7.0.20-1 -> 7.0.21-1)
[2011-04-12 09:28] upgraded libx11 (1.4.3-1 -> 1.4.3-2)
[2011-04-12 09:28] upgraded consolekit (0.4.3-2 -> 0.4.3-3)
[2011-04-12 09:28] upgraded dhcpcd (5.2.11-1 -> 5.2.12-1)
[2011-04-12 09:28] upgraded dmraid (1.0.0.rc16+CVS-2 -> 1.0.0.rc16.3-1)
[2011-04-12 09:28] upgraded eclipse-emf (2.6.0-1 -> 2.6.1-1)
[2011-04-12 09:28] upgraded eclipse-gef (3.6.1-1 -> 3.6.2-1)
[2011-04-12 09:28] upgraded eclipse-mylyn (3.4.2-1 -> 3.5.0-1)
[2011-04-12 09:28] upgraded xextproto (7.1.2-1 -> 7.2.0-1)
[2011-04-12 09:28] upgraded fixesproto (4.1.2-1 -> 5.0-1)
[2011-04-12 09:28] upgraded gnokii (0.6.30-1 -> 0.6.30-2)
[2011-04-12 09:28] upgraded libtasn1 (2.8-1 -> 2.9-1)
[2011-04-12 09:28] upgraded libgpg-error (1.9-2 -> 1.9-3)
[2011-04-12 09:28] upgraded libgcrypt (1.4.6-1 -> 1.4.6-2)
[2011-04-12 09:28] upgraded gnutls (2.10.5-1 -> 2.12.2-1)
[2011-04-12 09:28] upgraded gstreamer0.10-good (0.10.27-2 -> 0.10.28-1)
[2011-04-12 09:28] upgraded taglib (1.6.3-1 -> 1.7-1)
[2011-04-12 09:28] upgraded gstreamer0.10-good-plugins (0.10.27-2 -> 0.10.28-1)
[2011-04-12 09:28] >>> Updating module dependencies. Please wait ...
[2011-04-12 09:28] >>> MKINITCPIO SETUP
[2011-04-12 09:28] >>> ----------------
[2011-04-12 09:28] >>> If you use LVM2, Encrypted root or software RAID,
[2011-04-12 09:28] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-04-12 09:28] >>> More information about mkinitcpio setup can be found here:
[2011-04-12 09:28] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-04-12 09:28]
[2011-04-12 09:28] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-04-12 09:28] ==> Building image "default"
[2011-04-12 09:28] ==> Running command: /sbin/mkinitcpio -k 2.6.38-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-04-12 09:28] :: Begin build
[2011-04-12 09:28] :: Parsing hook [base]
[2011-04-12 09:28] :: Parsing hook [udev]
[2011-04-12 09:28] :: Parsing hook [autodetect]
[2011-04-12 09:28] :: Parsing hook [pata]
[2011-04-12 09:28] :: Parsing hook [scsi]
[2011-04-12 09:28] :: Parsing hook [sata]
[2011-04-12 09:28] :: Parsing hook [usb]
[2011-04-12 09:28] :: Parsing hook [pcmcia]
[2011-04-12 09:28] :: Parsing hook [dmraid]
[2011-04-12 09:28] :: Parsing hook [usbinput]
[2011-04-12 09:28] :: Parsing hook [keymap]
[2011-04-12 09:28] :: Parsing hook [filesystems]
[2011-04-12 09:28] :: Generating module dependencies
[2011-04-12 09:28] :: Generating image '/boot/kernel26.img'...SUCCESS
[2011-04-12 09:28] ==> SUCCESS
[2011-04-12 09:28] ==> Building image "fallback"
[2011-04-12 09:28] ==> Running command: /sbin/mkinitcpio -k 2.6.38-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-04-12 09:28] :: Begin build
[2011-04-12 09:28] :: Parsing hook [base]
[2011-04-12 09:28] :: Parsing hook [udev]
[2011-04-12 09:28] :: Parsing hook [pata]
[2011-04-12 09:29] :: Parsing hook [scsi]
[2011-04-12 09:29] :: Parsing hook [sata]
[2011-04-12 09:29] :: Parsing hook [usb]
[2011-04-12 09:29] :: Parsing hook [pcmcia]
[2011-04-12 09:29] :: Parsing hook [dmraid]
[2011-04-12 09:29] :: Parsing hook [usbinput]
[2011-04-12 09:29] :: Parsing hook [keymap]
[2011-04-12 09:29] :: Parsing hook [filesystems]
[2011-04-12 09:29] :: Generating module dependencies
[2011-04-12 09:29] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2011-04-12 09:29] ==> SUCCESS
[2011-04-12 09:29] upgraded kernel26 (2.6.37.5-1 -> 2.6.38.2-1)
[2011-04-12 09:29] upgraded kernel26-headers (2.6.37.5-1 -> 2.6.38.2-1)
[2011-04-12 09:29] upgraded libdrm (2.4.23-2 -> 2.4.25-1)
[2011-04-12 09:29] upgraded xkeyboard-config (2.1-1 -> 2.2.1-1)
[2011-04-12 09:29] upgraded xorg-server-common (1.9.4.901-1 -> 1.10.0.902-1)
[2011-04-12 09:29] upgraded xf86-input-evdev (2.6.0-2 -> 2.6.0-3)
[2011-04-12 09:29] upgraded xorg-server (1.9.4.901-1 -> 1.10.0.902-1)
[2011-04-12 09:29] upgraded nvidia-utils (270.30-1 -> 270.41.03-1)
[2011-04-12 09:29] upgraded lib32-nvidia-utils (270.30-1 -> 270.41.03-1)
[2011-04-12 09:29] upgraded libdc1394 (2.1.2-2 -> 2.1.3-1)
[2011-04-12 09:29] upgraded libxfixes (4.0.5-1 -> 5.0-1)
[2011-04-12 09:29] upgraded lirc-utils (1:0.9.0-1 -> 1:0.9.0-2)
[2011-04-12 09:29] upgraded mdadm (3.1.5-1 -> 3.2.1-1)
[2011-04-12 09:29] upgraded mesa (7.10.1-1 -> 7.10.2-2)
[2011-04-12 09:29] module configuration already contains alias directive
[2011-04-12 09:29]
[2011-04-12 09:29] upgraded ndiswrapper (1.56-7 -> 1.56-9)
[2011-04-12 09:29] ERROR: Module nvidia is in use
[2011-04-12 09:29] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-04-12 09:29] upgraded nvidia (270.30-3 -> 270.41.03-1)
[2011-04-12 09:29] upgraded phonon-gstreamer (4.4.4-1 -> 4.5.0-1)
[2011-04-12 09:29] upgraded rsync (3.0.7-2 -> 3.0.8-1)
[2011-04-12 09:29] upgraded syslog-ng (3.2.2-1 -> 3.2.2-2)
[2011-04-12 09:29] upgraded tiacx (20080210-19 -> 20080210-21)
[2011-04-12 09:29] ===> You must reload vboxdrv module before starting VirtualBox:
[2011-04-12 09:29] ===> # modprobe vboxdrv
[2011-04-12 09:29] ===>
[2011-04-12 09:29] ===> You must reload vboxnetflt for Host Interface Networking:
[2011-04-12 09:29] ===> # modprobe vboxnetflt
[2011-04-12 09:29] ===>
[2011-04-12 09:29] ===> You must reload vboxnetadp for Host-Only networking:
[2011-04-12 09:29] ===> # modprobe vboxnetadp
[2011-04-12 09:29] ===>
[2011-04-12 09:29] ===> To load it automatically, add vboxdrv module
[2011-04-12 09:29] ===> to the MODULES array in /etc/rc.conf.
[2011-04-12 09:29]
[2011-04-12 09:29] *** To recompile the modules do /etc/rc.d/vboxdrv setup ***
[2011-04-12 09:30] upgraded virtualbox (4.0.4-2 -> 4.0.4-3)
[2011-04-12 09:30] upgraded virtualbox-guest-modules (4.0.4-2 -> 4.0.4-3)
[2011-04-12 09:30] upgraded virtualbox-guest-additions (4.0.4-2 -> 4.0.4-3)
[2011-04-12 09:30] upgraded wxgtk (2.8.11-2 -> 2.8.12-1)
[2011-04-12 09:30] upgraded xf86-video-vesa (2.3.0-4 -> 2.3.0-5)
[2011-04-12 09:30] Running 'pacman -Rd broadcom-wl'
[2011-04-12 09:30] removed broadcom-wl (5.100.82.38-2)
[2011-04-12 09:34] Running 'pacman -U /tmp/yaourt-tmp-af/PKGDEST.wcc/broadcom-wl-5.100.82.38-2-x86_64.pkg.tar.xz'
[2011-04-12 09:34] ==> If the modules do not load at boot, add to your /etc/rc.conf:
[2011-04-12 09:34] ==> MODULES=(lib80211 wl !b43 !ssb ...)
[2011-04-12 09:34] ==>
[2011-04-12 09:34] ==> If you have problems with interfaces swapped, read:
[2011-04-12 09:34] ==> http://wiki.archlinux.org/index.php/Bro … every_time
[2011-04-12 09:34] installed broadcom-wl (5.100.82.38-2)
I can't really see anything that could cause an issue other than the kernel.

Graphics performance issues as virtualbox guest

Hi everyone,
I've been running arch natively on my 2013 macbook pro retina for a while but recently decided to run it in virtualbox hosted in OSX. I've got arch installed and am running gnome shell in the virtual machine, the problem I'm having is that the graphics performance is terrible, windows judder and lag when moving them around the desktop and scrolling is extremely jerky. Things i have done:
- I have installed the guest additions and made sure the guest modules are loaded.
- I have checked the 'enable 3D acceleration' box in virtualbox settings
- I have also checked that DRI is enabled using glxinfo.
One possible complication is that i am running virtualbox beta 5 but I have also tried with the stable edition and experienced the same issues.
I have no idea how to diagnose this and don't even know if acceptable performance is possible with this set up so any help is very welcome.
Thanks
Alex
Last edited by ZeroGravitas (2015-05-26 12:02:20)

Does your glxinfo show "Gallium" or "Chromium" as the renderer (not related to the browser)? If it shows Gallium, 3D acceleration is not working.
You mention running Gnome; If you're using GDM as your desktop manager, that's likely to be your issue. Gnome itself is fine, but GDM 3.16 breaks 3d acceleration in virtualbox guests. There's a bug open on the Gnome Bugzilla about it: https://bugzilla.gnome.org/show_bug.cgi?id=749390
Try switching to LightDM; that fixes it for me. If that solves your problem you might want to add to the bug report.
Last edited by mwillems (2015-05-27 16:13:25)

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Black screen on starting X in Virtualbox guest

Hi Arch Linux,
I am running Arch linux as a Virtualbox 4.2.6 guest with a Windows 7 host. I have virtualbox-guest-utils 4.2.6-1 installed.
When I run "startx" or "xinit" my screen goes black and freezes up. The VM seems totally unresponsive, I can't even switch to other virtual consoles with ctrl+alt+f2,f3 etc. I have to reset or use the ACPI shutdown command from the virtualbox menu. Even the ACPI shutdown seems to be a hard shutdown, as if the kernel or systemd has stopped responding (the VM closes with no messages in well less than a second). Sometimes after this power cycle, I get spammed by a repeating message from systemd when I boot that says it failed to start the journal service, though this may be unrelated. Here is my /var/log/Xorg.0.log if it helps: http://codepad.org/Ry1ixshS
Can anyone help?
Thanks,
Alex

In the Beginners' Guide, right after Testing X, there's a Troubleshooting section, and it says there to look out for lines that start with (EE) or (WW).
[ 38.633] (EE) Failed to load module "vesa" (module does not exist, 0)
I think you need to install the generic vesa driver, else there's nothing to fall back to:
https://wiki.archlinux.org/index.php/Be … deo_driver
Last edited by DSpider (2013-01-13 07:44:22)

Did OEL 5 U 6 Broke VirtualBox Guest Addon?

Just wondering anyone already know about this, looks to be VirtualBox Guest addon compiles fine but fails to load in 5.6...in both uek and non uek kernel...

Sorry, false alarm and my bad. I figured it out. Missed one important compile error, it could not find kernel-devel, and did not realize that right package to download is kernel-uek-devel.
Problem solved and everything now.
TommyReynolds, thanks for replying, for the record I am using VB 4.0.2 r69518
Thanks
.raja

Route Arch host traffic through VirtualBox guest

I was successful doing this under Windows 7. I would much rather have this running under linux so that I could learn more. I am a linux noob so I am still taking this all in (migrating from Xubuntu).
So far I have installed a bridge. I have found a helpful wiki entry https://wiki.archlinux.org/index.php/Ad … Networking
but it makes references to rc.config which seems to be gone do to the implementation of systemd. That is where I hit a wall. I am not familiar with systemd.
Thanks for any help you can give me (i've done my googling)
Richard Freeman

Okay, so you want a pfsense VirtualBox guest to be your gateway/firewall for the Arch linux Host.
What I would do is this...
NOTE: Arch dev's and forums people now think that the tools in the inetutils package (ifconfig, route and stuff) are out of date. So, someone will for sure come in and tell you how to do this with the iproute2 commands....
pacman -S bridge-utils uml_utilities inetutils
tunctl -g users
brctl addbr br0
ifconfig br0 192.168.30.2 up
ifconfig eth0 up
brctl addif br0 tap0
route add default gw 192.168.30.1 dev br0
# Owe, and set the DNS server to be sure
echo 'nameserver 8.8.8.8' > /etc/resolv.conf
Then in the VirtualBox GUI, give the VM 2 network interfaces. One being the physical ethernet interface eth0, and another being the virtual tap0 interface.
Now in the pfsense Guest. Make the Ethernet interface be the WAN and the tap0 interface be the LAN. Configure the tap0 interface with a Static IP address of 192.168.30.1 netmask 255.255.255.0 i.e. /24
Last edited by hunterthomson (2012-12-29 01:08:14)

No network connection or virtualbox guest additions after upgrade

I followed the instructions carefully, from the homepage, when carrying out the latest upgrade. Unfortunately, virtualbox guest additions is no longer working and nor can I get a network connection. To clarify, arch is running inside a virtual machine.
I'm not sure where to start looking to be honest and would appreciate some pointers about to get me on the way towards solving this problem.
EDIT: The virtualbox problem is related to error in the package
Thanks
Last edited by n_t (2013-06-11 19:01:52)

for the guest additions, it's a bug in the package, look here: https://bbs.archlinux.org/viewtopic.php?id=164924
For the network, you'll have to tell us how you were setting up the network before that isn't working now.

How can i install virtualbox-guest-additions?

pacman -S virtualbox-guest-additions
edit rc.conf
MODULES=(vboxguest vboxsf vboxvideo)
under gnome
glxgears 60.975fps
but under centos 5.6 gnome 559.203fps
how would i do to so fast?
Last edited by oddhornedant (2011-04-25 10:03:56)

This is the only entry I have in MODULES=(vboxdrv)
I use Vbox from AUR as they work for me.
I use win7/winxp fedora debian etc as guests with full access to usb/ shared drives etc.and full screen where possible as some distros do not do full screen in vbox without a lot of fiddling
are you in the correct groups with out the correct permissions they do not work usbmux:x:140:username
vboxusers:x:108:username

Keyboard USB problems on booting windows xp

I have a problem with a keyboard and mouse logitech as USB. If I activate BIOS's option USB KB/Storage Support, windows xp does not boot and if I deactivate the option, the keyboard does not work until does not come to the screen of logon. Someone knows since I can solve it?, happens to me so much in a mobo MSI Neo4 Platinum and in a MSI Neo2 FIS2R. Thank you in advance.
A greeting

Make sure you are plugging into a rear port unless you have carefully checked the front ports wiring harness. If pin 9 is still on the front port harness then you have a USB problem. Also make sure you are not using the KB through a hub as some hubs won't work. Use the latest bios as it has legacy device support as well and it must be turned on in Bios in order to work well with most KB's.

[SOLVED] USB on VirtualBox guest (windows 7)

Similar Messages

Maybe you are looking for