[SOLVED]When did minidlna commands change to minidlnad?

Now when I run
sudo minidlna -R
I get a
sudo: minidlna : Command not found
Using sudo minidlnad -R works. When did this change ? I did notice the upgrade of minidlna last week
Also minidlna would fail to start even when I did a
sudo systemctl start minidlna
I found that this was because the minidlna.service file was pointing to a different PIDFile in the Execstart and the PIDFile element
[Unit]
Description=minidlna server
After=network.target
[Service]
Type=forking
User=nobody
ExecStart=/usr/sbin/minidlnad -P /run/minidlna/minidlna.pid
PIDFile=/var/run/minidlna/minidlna.pid
[Install]
WantedBy=multi-user.target
Changing the PIDFile line to
PIDFile=/run/minidlna/minidlna.pid
allowed me to start up minidlna successfully. Can someone using minidlna confirm this before I open a bug report for it?

karol wrote:
Inxsible wrote:
karol wrote:https://projects.archlinux.org/svntogit … 14450e84c6 (at the very bottom)
I see. That does show why it stopped working. But how is it working for jrussell?
No idea. If jrussell shares more info, e.g.
type -p minidlna
pacman -Q minidlna
maybe we can figure this out.
Sure,
admin@russell-server ~ % type -p minidlna
minidlna not found
admin@russell-server ~ % type -p minidlnad
minidlnad is /usr/bin/minidlnad
admin@russell-server ~ % sudo pacman -Q minidlna
minidlna 1.1.0-2
admin@russell-server ~ % sudo systemctl status minidlna.service
minidlna.service - minidlna server
Loaded: loaded (/usr/lib/systemd/system/minidlna.service; enabled)
Active: active (running) since Thu 2013-05-23 15:32:02 SAST; 7h ago
Process: 263 ExecStart=/usr/bin/minidlnad -P /run/minidlna/minidlna.pid (code=exited, status=0/SUCCESS)
Last edited by jrussell (2013-05-23 21:13:18)

Similar Messages

  • Can't read my kids' texts online - I get it - but when did this rule change?

    I clearly remember having a discussion with the Verizon rep about text messaging when we set up our account. He was really trying hard to sell us on the parental controls package which among other things, would allow us to monitor content. From what I have read here, and elsewhere, we can't read the texts. We've had the account for a little over a year now. My question is was this an option previously, or was the Verizon rep misleading us? Was there a law recently passed which prevents monitoring of text messages by the account owner?
    All that aside, I am very satisfied with out Verizon experience overall.

    TK421 wrote:
    Thanks for the info. We went back and forth on signing up for this, and eventually decided not to do it. It seemed reasonable to me to allow parents to have this as an option - since they pay the bills and are ultimately responsible for their kids' actions. I won't get into a debate about the ethics of kids' privacy here, and good parenting. But, I think it would be a useful tool for parents to have - if for no other reason that to spur a discussion with kids at home.
    Yes, a useful tool for parents - but as budone said, Verizon has no way of knowing or verifying that the phones are actually in the hands of minors.  Many family plans are actually a group of friends, or, in my case, multi-generational (my mom, my husband, me, and 2 adult children ages 19 and 22) and there is too much potential for abuse.
    When our kids were minors, they knew that we had access to their phones, and if they wanted the privacy then they needed to foot  the bill for their own account.  As long as we were paying the bill and responsible for the phone, we had access.  If they tried to subvert that, the phone was history.  It's worked for us.

  • Why did recent update change my dafault browser to yahoo instead of google? when i type at home page beneath icon my default SE is Yahoo.please help restore to google

    why did recent update change my dafault browser to yahoo instead of google? when i type at home page beneath icon my default SE is Yahoo.please help restore to google

    What you are experiencing is 100% related to Malware.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • After Effects Warning: A problem occurred when processing OpenGL commands

    Hi There Fellow Adobe After Effects Users.
    Please could some one help assist me with the following error i am getting.
    I bought a template and needed to do a logo animation reveal. It was done using After Effects CC for PC.
    AE had to then convert it to Mac which did so successfully. I was able to modify, add my logo and render out.
    The following day i opened the file again and it gave me the follwoing error:
    "After Effects Warning: A problem occurred when processing OpenGL commands"
    What is confusing to me is that this issue would normally appear if my graphics cards did not support OpenGL, and it would not have opened in the first place if it was not supported.
    My graphics card is a - ATI Radeon HD 5770 1024 MB - running Mavericks OS. So i know that this card does support GPU acceleration.
    Please could someone point me in a direction that will fix this.
    Thank you so much

    Thank you for the update Mylenium.
    If I look at my display info, the card says OpenGL engine. Does this mean anything?
    If it's not supported, then what's the point in purchasing a Mac If you cannot use AE's full capacity. Mac doesn't put Nvidia cards in there machines and on the Adobe website, ATI cards ate not listed; but in the same breath it says that most ATI cards that have come out in the past 5 years are supported. Surely Adobe and their technicians must have spoken with Mac technitions.
    I am considering to buy the new Mac Pro; but am definitely going to change my mind if I cannot use AE's full compatibility. I don't see why spend so much cash if the cards aren't great.
    Please could you then tell me what functions to switch off in the project file. I'll get the guy whom I bought the template from to switch of those functions.
    Thank you.
    Have a great day

  • Error 801 when executing external command on

    Hello,
    I have installed CCMS agents and CCMS ping in my system yesterday. And activated the CPH BGD jobs for SL reporting purpse. Now I am getting an error "Error 801 when executing external command on" under class LC 2. I am not able to find any relevant note or help for this error. Any idea why this happens? How can I solve this? The details as follows:
    EXTERNAL COMMAND: rc = Error 801
    SXPG_COMMAND_EXECUTE(LONG):
    <timestamp>: 20100310144206
    COMMANDNAME: PING
    ADDITIONAL_PARAMETERS: s-sapcae
    LONG_PARAMS:
    OPERATINGSYSTEM: AIX
    TARGETSYSTEM: sapasmc1
    DESTINATION:
    SY-SUBRC:  801
    Regards,
    Rajeev

    Hi,
    I have activated the trace level to 3 and now I get some messages in dev_cp which is as follows:
    Trace file of control program (trace level 3)
    < Function: BtcTrcInit> Function: main  SAPXPG 720
    2010-03-11  08-52-09 : Before BtcXpgDetach
      > Function: BtcXpgDetach  < Function: BtcXpgDetach  Accept RFC connection from R/3 system
    2010-03-11  08-52-09 : Before RfcAccept
    2010-03-11  08-52-09 : RfcAccept returned OK
    Begin of check_if_security_list
    security check switched OFF
    End of check_if_security_list
    Begin of check_trace_option
    End of check_trace_option
      Install RFC call SAPXPG_START_XPG
      Install RFC call SAPXPG_START_XPG_LONG
      Install RFC call SAPXPG_END_XPG
      Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
    2010-03-11  08-52-09 : Before first call of RFCDispatch
    Security: rfcexec_logon_check
      rfcexec_logon_check: logon_user = TT4WNUC
      sapxpg_logon_check: rfc_attr.user = TT4WNUC
      rfcexec_logon_check: client = 100
    2010-03-11  08-52-09 : After first call of RFCDispatch
    2010-03-11  08-52-09 : Before call of RfcClose (sequencing error)
    2010-03-11  08-52-09 : After call of RfcClose (sequencing error)
    < Function: main
    2010-03-11  08-52-09 : End of SAPXPG: main
    I think the issue is with the user TT4WNUC. Could you please let me know from where I can change this user?
    Rajeev

  • I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card,

    I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card, I get the following error:
    "You need permission to perform this action" and below that:
    "You require permission from the computer's administrator to make changes to this file".
    Printer is set up wireless.
    I am signed on as administrator, can't get access with any user account.
    The old problem ridden HP Photosmart I replaced, I could change, delete, etc. without issues.
    Solved!
    Go to Solution.

    hi ehnco,
    It sounds like the Read/Write attribute on the printer needs to be changed.  Use the following steps to change the read/write attribute:
    Make sure that the machine is turned on
    Press the <Setup> button.
    Use the   button to select  [ Device settings], then press the <OK> button.
    The Device settings screen is displayed.
    Use the  button to select [Device user settings], then press the <OK> button.
    Use the  button to select [Read / write attribute], then press the <OK> button.
    Use the  button to select [Writable from LAN PC], then press the <OK> button.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Dunning letters generation when customer address is changed

    Hi,
    For some customers no dunning letters were generated. After investigation inactive bill-to site should be activated as invoices were assigned to this bill-to.
    How is possible to make that dunning letters generated when customer address is changed and customer can receive letters to new address for all its invoices?
    Any help will be appreciated!
    BR, JC

    hi
    I have created one sales order example X and i created the another sales order Y with respect to X
    Is this X sales document is closed????
    And I also changed the address of the ship to party in sales document Y.
    Did you assgined another SP to sales Document Y
    If you have chnaged the address for SP in customer master then it will reflect to both
    Also it will not chnage the ADRESS NO in VBPA table, but it will update the address

  • How do I quickly update the ActiveX automation references in my VIs when the ActiveX interface changes?

    Hello all,
    I joined a test automation team in the middle of a large project and
    inherited a huge set of VIs (over 700) and associated architecture for
    this automation (not to mention the several thousand TestStand
    sequences).  Another part of the project is being developed by our
    customer, who is using VB 6.0 to create ActiveX components which we
    need to use in LabView to access their hardware.  They've already
    invested a large amount of time developing these ActiveX components,
    and they are not finished -- meaning the ActiveX interfaces will be
    changing.  Every time they send updated ActiveX components, I have to
    re-write many, many VIs including updating a couple strict typdefs. 
    This process takes way too much time and is mind-numbing and prone to
    error or omission.
    Unfortunately I can't post any of the VIs because of a NDA.  But
    perhaps a bit more detailed explanation would help.  TestStand calls a
    VI to open and get an ActiveX reference for automation (which it stores
    in a variant).  It will pass this reference into any VI it calls to
    perform specific functions through this ActiveX interface.  For
    example, one VI that may be called passes this automation refnum into
    another, which passes it to another, which passes it into another to
    get the actual ActiveX reference stored in that variant (through a
    Variant To Data call with a strict typedef of the ActiveX component
    wired to the type input).  [See the attached image of this sample VI
    hierarchy: the far left icon would represent TestStand, and the far
    right is the strict typedef.]  Any of the VIs in the chain might use
    ActiveX Property or Invoke nodes, and it can break at any one of those
    when the ActiveX component changes.  It's easy to fix each one, but
    since there are so many VIs it takes a very long time.
    Is there any way at all to do a massive search/replace or something to
    make the ActiveX references update?  I realise that even though
    property or method names stay the same from one version to the next,
    they are different references.  Is there a way to update these based on
    name if you give it the base ActiveX reference?
    Thanks in advance for any help!
    Tom Williams
    Attachments:
    hierarchy.GIF ‏6 KB

    Ben,
    Unfortunately I can't post any VIs that would demonstrate the problem
    because the ActiveX components are confidential.  I'll try to develop
    my own ActiveX dll that will demonstrate it, but in the meantime, in
    hopes that another picture will help, I've attached an image of a block
    diagram (with some names changed to protect confidential information)
    of one of the lower level VIs from the hierarchy I posted.  In this
    example, the "Automation Refnum IN" is an input with a type definition
    linked to the strict typedef based on the ActiveX automation dll that
    has changed.  I updated that typedef, but as you can see the output to
    the "Class1" indicator is broken.  If I delete the "Class1" indicator
    and select Create->Indicator from the Class1 property node, and then
    wire the new "Class1" indicator to the connector pane, the VI is fixed
    -- at least at compile time.  In most cases there is also a runtime
    problem where the reference obtained by one of the intermediate
    property nodes is null, so the property or method node that uses it
    fails (e.g. "_VNManager.Networks" property returned is 0, so the
    "_Networks.Network1" property node fails).  To fix this problem, I have
    to delete the wires between the property nodes, and one by one select a
    different property/method, then select the correct property/method and
    re-wire.  There seems to be a bit of "jiggling the handle" to get it to
    work though.
    I don't know if the ActiveX developer changed anything in this class,
    but if he did, he didn't change the name of this class.  I would like
    to have to modify the VI only if a class, property or method has
    changed name or been removed.
    Does that all make sense?  Thanks for any pointers or help!
    Tom
    Attachments:
    Class1_Path.GIF ‏7 KB

  • When I try and change my Apple ID email address to my Me account email, it won't let me. I want to change it so it goes through my Me email. How do I do this?

    Hey guys,
    So basically as the question above says...
    I have had an Apple ID for a few years now under a Hotmail email. Recently I got a Me account and I want to change my primary email address on my Apple ID to this new Me email address as I no longer use the Hotmail email.
    However, when I try and change it, it simply states "This domain name is reserved for MobileMe accounts."
    Could really use the help, and I thank people in advance for any advice!
    Dan

    hey i have same issue i was woundering if you got ure fixs and if did how

  • CAN NO LONGER DOWN LOAD MUSIC TO MY SEPERATE HARD DRIVE AS ITUNES CLOSES WHEN I TRY TO CHANGE THE SETTINGS

    i am unable to down load my itunes music onto a sperate hard drive as itunes closes when i try to change the settings

    i dont know much about computers but I think this happened to me before.
    as I said i hardly know computers. i think I unplugged the hard drive all cables and i turned the computer off too. plug it all again and see if it grabs it again. i did it and it worked. some how the extHD gets stuck on on. so thats why I unplugged it all. I dont know if you want to try that.

  • Looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free

    looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free or even paid will work.

    I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers.  I did not say it will work with any carrier at one time.  I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it.  As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you  cna purchase a SIM card that works with your new carrier.
    The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince.  I was thinking something more along some of the really durable cases at BallisticCaseCo.com
    As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped.  For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc.  I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time.

  • When I make a change to an image in Develop, how do i retain it?

    When I make a change to an image in Develop then go back to Library, I loose the change.  How do I retain the change?

    You don't have to do anything special. The changes made in Develop do stick.
    Perhaps the change isn't being shown in the Library module. There's a minor bug that shows up occasionally. When you're looking at the preview in the Library module, hit the spacebar to go to 1:1 and then hit it again to go back to Fit. That should update the preview to match what you did in Develop.
    Hal

  • When I close CS6 changes in settings are not saved.  Reverts to default settings on reopen.  Why?

    When I close CS6 changes in settings are not saved.  Reverts to default settings on reopen.  Why?

    Sorry Photoshop --  Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
    Thanks,  Al

  • Im trying to reset my ibook g4. when I hit command s all I get is a black screen. is there another way?

    Im trying to reset my ibook. When I hit command s all I get is a black screen. And command r does not work.

    There are some references, over a period of time, for some vintage
    hardware models of Apple computers covering older software and
    the keyboard commands haven't changed all that much. Some are
    more directed at later OS X versions, in recent reference sites...
    •OS X Keyboard Shortcuts:
    http://support.apple.com/kb/HT1343
    •Magical Macintosh Keyboard Sequences: (2004)
    http://davespicks.com/writing/programming/mackeys.html
    •TUAW Tip: keyboard shortcuts during OS X Startup: (2006)
    http://www.tuaw.com/2006/03/27/tuaw-tip-keyboard-shortcuts-during-mac-os-x-start up/
    Why were you trying to start in Single user mode or Command-line?
    Do you have the OS X system install-restore DVDs?
    Good luck & happy computing!

  • [SOLVED] I did a dumb thing... (chmod/chown)

    Hi all, hope this is the right section,
    So I decided that I was tired of authenticating when I wanted to change some files for my SLiM theme, and decided to add permissions to my user.. on the entire share folder. Well, here's what I ran:
    [naut@arch /usr]$ sudo chown -Rv root:naut share/ && sudo chmod -Rv 664 share/
    Yep. So after I did that I noticed that xfce stopped working properly; all of my icons, panels, etc, were showing as follows: ▖▖▖▖▖▖▖▖▖▖
    I immediately tried to revert the change my chowning back to root:root, and setting most files back to 644, but it had no effect. I logged out and logged back in to see if it was a temporary thing, but when I logged back in, even more items were showing ▖▖▖▖▖▖▖▖▖▖. I switched to another tty and chmoded all of /usr/share to 777... now I know that's generally a bad idea but when I logged back in, I did see that it at least went back to normal functionality.
    So my question becomes, how can I know what dirs/files need what permissions? I'd like to get it back to where I have the least permission required for everything to work properly.
    Last edited by naut (2014-05-09 14:56:16)

    644 broke things because directories need execute permissions to be traversable.
    Unfortunately, /usr/share is a grab-bag of permissions:
    # find /usr/share -type f -exec ls -l {} + | cut -d ' ' -f 1 | sort | uniq -c
    2879 -r--r--r--
    4 -r-xr-xr-x
    49229 -rw-r--r--
    12 -rw-r-xr--
    143 -rw-rw-r--
    277 -rwxr-xr-x
    3 -rwxrwxr-x
    You'd probably be safe enough to set all files to 644 and all directories to 755, but you might want to check with pacman -Qkk and reinstall any packages that complain about permissions mismatches. This won't fix everything though, as some packages still pre-date MTREE files.

Maybe you are looking for