[SOLVED]X server locale issues

Ok so I had this common issue with the glibc update (deleted everything but modules in /lib) and I had to manually unzip an older glibc package in my / folder. After that I rebooted my system, updated fully (latest glibc & symlinked /lib to /usr/lib properly). I then started X normaly but I noted this:
http://pastebin.com/xfd3tXB7
So although X boots fine, i have this minor locale issues. I guess it has to do with the fact that I am using greek language. I have installed a greek-Inconsolata font back then and now it is not displaying properly on the urxvt (just some weird chars). I can however switch keyboard layouts just fine and type in both languages (greek/english)
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Athens"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=(fglrx snd-usb-audio)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=GliderVillage
interface=wlan0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(dbus syslog-ng wicd crond xkbevd wireless-regdom mpd)
Edit: Btw there is no locale.conf file in my system Oo
Last edited by Crone (2012-08-24 13:58:25)

Hmm i did not use locale-gen. I used it now .Do I need to reboot after that? Because restarting X doesn't work
locale -a: (before and after locale-gen without reboot)
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_COLLATE to default locale: No such file or directory
C
POSIX
locale: (same)
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Last edited by Crone (2012-07-28 17:24:08)

Similar Messages

  • Terminal Server performance issue

    Hi,
    We have Acrobat Pro 11.0.07 on a Terminal Serveur ( windows server 2008 R2 standard) and got performance issue when we use acrobat. Acrobat use a complete core and this is slowing our server. Is there an other version of Acrobat to use or patch to fix that issue ?

    Hi Sean,
    "Equally annoying. When I remove the printer in question, it re-adds itself and I end up with multiple copies of the same printer. Is there anyway to stop this from happening?"
    Did you try to login this terminal server locally ?
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Has anyone solved the "garbled characters" issue i...

    When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
    Zürich appears as: Zã¼rich
    München appears as: Mã¼nchen
    Liège appears as: Liã"ge
    I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
    Has anyone solved this extremely annoying issue?
    Thx

    I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
    Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
    As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
    At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
    So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
    After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
    The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
    I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
    Finally, after playing with it some more I found a simple solution which should work for everyone:
    ***** SOLUTION *****
    1. Enable internet access in Nokia Maps application (set it to When Needed).
    2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
    3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
    4. Put the card back in the phone if you extracted it and start Nokia Maps.
    5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
    6. Now codepage should be correct and all names become readable.
    This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
    Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
    Message Edited by ankor85 on 09-Jan-2008 09:02 PM

  • OS 10.4 Server Login Issues

    Yesterday, we experienced a small power glitch and despite the presence of a UPS, the server went off and then restarted, resuming access to DayLite (collective db for contacts, etc.)
    When I tried to log into the server (locally) and mount a volume, my PB hung up, crashing the finder. I experienced the same issue on another machine, same result. I can use my username and PW to log in, even seeing the volumes, but the hang occurs when I try to actually access the files.
    It gets more interesting in that I can access the files on the server directly AND via VPN, just not on our intranet. Your thoughts?

    Not much to go on, but I'd try logging in via SMB or NFS if you're using HFS, or vice versa, for a test if possible.
    Then I'd try clearing all Caches.

  • Powerpoint web sharing fails with "some presenting features are unavailable due to server connectivity issues"

    Hi,
    I am having problems getting PowerPoint sharing working with Lync 2013. My setup is as follows
    Lync 2013 Enterprise pool (november 2013 updates) on Windows 2012 and 
    Windows 2012 webapp farm
    Kemp HLB
    Everything is working ok, including whiteboards and application sharing, but i cannot get the powerpoint sharing to work. I always get the "some presenting features are unavailable due to server connectivity issues" for internal or external
    users.
    The webapp looks healthy and there are no errors in the Lync server or the webapp event log. Discovery urls can be accessed and i have put the .net 3.5 as suggested in a few forums. 
    When a user starts the PowerPoint it successfully loads the file to the Lync file share and request goto the webapp server. I am using a HLB which shows me that requests are forwarded to the webapp farm. I have removed the HLB for testing and get the same
    results.
    I did log this with the forum a month or so ago, but I had a file upload issue then which is now solved, but the powerpoint sharing is not.
    any ideas?
    sg

    I ran some diags on the client and i managed to find an error. This was in the client debug logs when trying to start a powerpoint presentation
    54019;reason="The presentation at the WAC URL does not exist.";ClientType=Lync;Build=15.0.4551.1007
    The url in the next line shows the paths which have the correct toplevel URLS (have changed the domain name in the pasted text) 
    Url="https://webapp.domain.com/m/ParticipantFrame.aspx?a=0&amp;e=true&amp;WopiSrc=https%3A%2F%2Flyncpool.domain.com%2FDataCollabWeb%2Fwopi%2Ffiles%2FD-1-D0F5EA&amp;access_token=AAMFEPAUXKWO9TdVleKl-gn7iQAGEKvoSrQNqS1_i2tD90k7zj2BEPAUXKWO9TdVleKl-gn7iQCCAn40gyABxKA-5znlMODU0Kuz8ZHOBR7Q_183_BeUZcSWhjdOOIYIrg5RP8De0AgIDURhdGFDb2xsYWJXZWI&amp;&lt;fs=FULLSCREEN&amp;&gt;&lt;rec=RECORDING&amp;&gt;&lt;thm=THEME_ID&amp;&gt;&lt;ui=UI_LLCC&amp;&gt;&lt;rs=DC_LLCC&amp;&gt;&lt;na=DISABLE_ASYNC&amp;&gt;"</diagHeader><progressReports/></error></reportError>
    sg

  • Could not establish TLS connection on port 7001 - "unable to get local issuer certificate"

    tvcs: Event="Outbound TLS Negotiation Error" Service="SIP" Src-ip="10.0.7.168" Src-port="29127" Dst-ip="<Public IP>" Dst-port="7001" Detail="unable to get local issuer certificate" Protocol="TLS" Common-name="ewe.<domainname>.com" Level="1" UTCTime="2014-11-12 12:48:20,071" 2014-11-12T15:48:05+03:00
    Getting above error on Expressway-C server while establishing TLS connection with Expressway-E in DMZ. I have enabled static NAT on Expressway-E and give the Public IP on peer address of Expressway-C. At that time, i was getting DNS resolution error  on Expressway-C so we added a host record on local DNS for Public IP. Later, I created CSR from both Expressway C & E server and ask local microsoft team to issue Local CA certificates. After uploading, i was getting above error (Failed to establish TLS). Also i have uploaded company (wilcard) Public certificates (issued from Geotrust) and we are getting the samer error and Expressway server could not establish TLS connection on port 7001. Firewall connections are done and i double checked it. 
    Expressway ver 8.2

    Yes, Exp-C > Peer Address (FQDN of Exp-E)
    Certificate of Exp-E -> When generating CSR from Exp-E, automatically FQDN (Exp-E(hostname).domainname.com) will be shown. Then this CSR will be send to local CA or Public CA to generate a certificate. OR you meant to say in Exp-E CSR we need to add FQDN of Exp-C server also in alternative name and vice versa too.
    Yes, root certificates & intermediate certificates are uploaded to trusted CA.

  • Jabber Guest server Local SSL certificate

    Hi , trying to download a local ssl certificate from jabberguest server and issued a 'generate a new self signed certificate' request. system shows 'a certificate signing request is being created, please wait' . unfortunetly its been like that for 2 days now - even after rebooting the server it still reports the same. (version is 10.5.3.115)....any advice appreciated.....TIA , Jeff

    Jeff,
    I had a look at my Jabber Guest server this morning and oddly enough I found the same thing as you did. I'm not sure when the server got into this state however I can say it has been fully functional. Anyway, there are two options that you generally should have.
    1) "Generate a New Self-Signed Certificate"
    2) "Create a New Certificate Signing Request"
    To restore these options I had to run the certificate scripts through the root of the system.
    1) cd /opt/cisco/webcommon/scripts/
    2) ./createcsr.sh   (This is for the Cert Signing Request)
    3) ./selfsigned.sh  (This is for the Self Sign)
    After running each script you'll need to run through the general certificate questions.
    I hope this helps.
    -P

  • Server busy issue since i joined Creative Cloud

    I had Lightroom 5 and then joined creative cloud and have been having issues ever since i signed up.  Every time i start lightroom i get a server busy error for hours on end.

    A fix to Lightroom's “Server Busy Error” on a Windows 7 64 bit computer:
    I see in the discussion threads there are a LOT of frustrated people over this Server Busy issue, so I hope this helps someone. This is what Adobe tech support had me do, which fixed my problem. I got through on the phone right away, and the fix took no longer than 20 minutes to determine, with the support person remoting into my computer.
    I already had Lightroom 5.6 installed through my Creative Cloud subscription, and it had worked for a few weeks for me, although with increasing problems with the Server Busy box popping up. I was able to get rid of it by switching to Switch and Retry, but eventually it locked me out entirely.
    Tech Support told me the problem was a permissions issue.
    Try the following and see if it solves your problem:
    In C:\Program Files (x86)\Common Files\Adobe, find the SL Cache folder and move it to your Desktop.
    In C:\ProgramData\Adobe, find the SL Store folder and move it to your Desktop.
    R Click on your Lightroom icon and “Run as Administrator”.
    If it opens correctly, that shows it is working now.
    Close Lightroom and reopen the application normally.
    Refer to:
    Error Message Server Busy During Startup
    Error on the activation server
    Re: Server Busy - Lightroom locked up
    Regards
    Rajshree

  • Server busy issue

    I know I seen this in the groups but why do I get server busy sometimes and
    have to keep pressing retry all the time?

    A fix to Lightroom's “Server Busy Error” on a Windows 7 64 bit computer:
    I see in the discussion threads there are a LOT of frustrated people over this Server Busy issue, so I hope this helps someone. This is what Adobe tech support had me do, which fixed my problem. I got through on the phone right away, and the fix took no longer than 20 minutes to determine, with the support person remoting into my computer.
    I already had Lightroom 5.6 installed through my Creative Cloud subscription, and it had worked for a few weeks for me, although with increasing problems with the Server Busy box popping up. I was able to get rid of it by switching to Switch and Retry, but eventually it locked me out entirely.
    Tech Support told me the problem was a permissions issue.
    Try the following and see if it solves your problem:
    In C:\Program Files (x86)\Common Files\Adobe, find the SL Cache folder and move it to your Desktop.
    In C:\ProgramData\Adobe, find the SL Store folder and move it to your Desktop.
    R Click on your Lightroom icon and “Run as Administrator”.
    If it opens correctly, that shows it is working now.
    Close Lightroom and reopen the application normally.
    Refer to:
    Error Message Server Busy During Startup
    Error on the activation server
    Re: Server Busy - Lightroom locked up
    Regards
    Rajshree

  • Cannot log in to server locally

    I am running OSX Server 10.4.8 on a G5 Xserve. Immediately after installing the latest security update via software update I was unable to log in to the server locally, the keyboard and mouse are completely unresponsive. The server is otherwise up and running. When I log on using server monitor I can run the system profiler, which locates and identifies the keyboard. Does anyone have any suggestions on how to solve this problem?
    Thank you in advance.

    Thanks. I do not remember ever locking the server, but, when I checked, the indicator dot on the locking mechanism was in the six o'clock position (not fully locked). When I moved it to the unlocked position I was able log in.

  • New Mac Mini Server Network Issue

    I recently purchased the new Mac Mini Server with 10.6 to use as a Content Filter/Web Server for a small private school. While trying to set it up, using the on board ethernet and a USB to Ethernet adapter, I have lost all ability to acquire an IP. IT does not matter if I use the on board ethernet, the USB adapter, or the Airport. All three return a self-assigned IP. I know this is related to the machine since I can still access the cable modem setup by typing in 192.168.100.1. And I brought it home to work on it a little more and the bonjour services are detecting the other macs on the network.
    I tried trashing my network preference plist, but no change.
    I am considering doing a fresh install since I think the initial setup was borked. But I thought I'd hit up the board and see if anyone else had a thought before I begin that process.
    thoughts?

    I have setup this configuration several times with both a MacPro and the smaller mini setup. The gateway setup we are describing is about as simple as it gets (static IP, gateway running all services so 1 IP address, gateway set as 192.168.1.1 on the local net. Simple DHCP and DNS "server.local", and "server.xxx.com" external).
    I would be overjoyed to find that I can configure this by setting up some simple overrides in the routing. I would point out in defense that _everything else_ works perfectly basically by default.
    1) dns on server: local and external, forward and reverse from itself and the local network - check
    2) services on server (all of them): from itself and the local and external networks - check
    3) network access (ie NAT & Firewall) for local machines - check (web, streaming, even bittorrent)
    The only issue I see is that remote clients cannot access the gateway itself properly though VPN. UPD return packets seem to be mis-routed through the physical interface rather than the virtual one.
    ALL other operations (Mail, iCal, iChat, Push, Web Services, Wiki, Web Mail and iCal, NAT) work perfectly for the server, local network, and external hosts. The above problem only happens for vpn clients, and then only for connections from them to the gateway itself, and only for UDP packets.
    I would really love to know how to fix it, especially if this can be explained by a needed custom rule (But I'm guessing not given the otherwise full functioning system). Are you saying that to make VPN work you need to add custom routing info that is not described in the Server docs? If so what?
    Thanks,
    Hunter

  • Can you help me solve my aspect ratio issue?

    Hey guys,
    I'm posting this in hopes that someone can help me solve an aspect ratio issue with a project that I have to finish by tomorrow.
    I'm trying to avoid having to re-edit the entire thing.
    I shot the project with my Nikon D7000 DSLR. in 720p 30p (29.97)
    I am running Adobe Premiere Pro CS5 (the trial version).  I have the full version of Adobe Premiere Pro CS3.
    The reason I was working with the trial is that CS3 can't handle the H.264 MOVs that the D7000 records.
    You can work with a timeline, but if you try to export anything, it never works.  I always have to convert my footage to ProRes MOVs with MPEG Streamclip before I can work with them is CS3.  That takes a lot of time and a lot of hard drive space.  After much research, I found out that CS5 is the way to go for DSLR footage.  I just need to save up my pennies for the upgrade.
    So I thought I'd edit this short (1 minute) project with the trial to see how CS5 works with the D7000 footage.
    Upon installing the trial program, I found that the project presets were limited.  I knew this ahead of time because it's clearly stated on the Adobe's website.
    But I wasn't aware how limited they are.
    Since "DSLR 1280x720p 30p" is not an option with the trial, I was going to use HDV 720p 30p.  But that was not an option either!
    So basically, my only option for 16x9 30p was "DV NTSC Widescreen".  It's my understanding that this is 864x480 (in square pixel aspect ratio) or 720x480  (in widescreen pixel aspect ratio)   I needed the output file to be 864x486.  I downsized the footage to 69% in the "Video Effects: Motion" setting so it looked correct in the project.  I didn't think about those extra 6 pixels until I outputed the file and saw thin black lines on the top and bottom.  My guess is that Premiere is adding black pixels because my project is technically 720x480 (1.2121)
    Any thoughts on how I can get a clean 864x486 export?  I'd rather not re-edit the whole thing...which I would have to do in CS3 after I spent a few hours converting the original files in MPEG Streamclip.  I don't know if there is a way to export something out of CS5 and then open a new project in CS3 to make this work.
    Thanks in adavance!
    - Jordan

    On export, just crop a few pixels off of each side; that'll let the image scale correctly to the output frame size without black bars.
    I'm not running the trial, but you should still be able to create a custom sequence preset using the Desktop editing mode. Just switch over to the General tab when you create a new sequence, and choose "Desktop" from the editing modes. Set the rest of the parameters as you need them.
    Even easier: once you've imported your footage, just drag a clip to the New Item icon at the bottom of the project panel; a sequence will be created matching your footage parameters. You can edit at full-resolution, and then export to your desired frame size when complete--you'll probably still need to crop a few pixels (in the Export Settings window) to eliminate the black bars.

  • SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent

    Dear all,
    i have a Windows 2008 Server (X64) with SQL 2005 SP3 and some troubels...
    The SQL works since some week, this week we installed SQL SP3 and change of the local Admin password.
    Yesterday we reboot  the Server, now the SQL Server Agent is unable to start!
    The SQL Server is up and running,
    Errorlog:
    2009-11-06 09:49:52.56 Server      Microsoft SQL Server 2005 - 9.00.4035.00 (X64)
     Nov 24 2008 16:17:31
     Copyright (c) 1988-2005 Microsoft Corporation
     Standard Edition (64-bit) on Windows NT 6.0 (Build 6002: Service Pack 2)
    2009-11-06 09:49:52.56 Server      (c) 2005 Microsoft Corporation.
    2009-11-06 09:49:52.56 Server      All rights reserved.
    2009-11-06 09:49:52.56 Server      Server process ID is 5912.
    2009-11-06 09:49:52.56 Server      Authentication mode is WINDOWS-ONLY.
    2009-11-06 09:49:52.56 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
    2009-11-06 09:49:52.56 Server      This instance of SQL Server last reported using a process ID of 4424 at 11/6/2009 9:43:23 AM (local) 11/6/2009 8:43:23 AM (UTC). This is an informational message only; no user action is required.
    2009-11-06 09:49:52.56 Server      Registry startup parameters:
    2009-11-06 09:49:52.56 Server        -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
    2009-11-06 09:49:52.56 Server        -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
    2009-11-06 09:49:52.56 Server        -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
    2009-11-06 09:49:52.59 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2009-11-06 09:49:52.59 Server      Detected 4 CPUs. This is an informational message; no user action is required.
    2009-11-06 09:49:52.67 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2009-11-06 09:49:52.71 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
    2009-11-06 09:49:53.73 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
    2009-11-06 09:49:53.73 Server      Database mirroring has been enabled on this instance of SQL Server.
    2009-11-06 09:49:53.73 spid4s      Starting up database 'master'.
    2009-11-06 09:49:53.86 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2009-11-06 09:49:53.95 spid4s      SQL Trace ID 1 was started by login "sa".
    2009-11-06 09:49:53.97 spid4s      Starting up database 'mssqlsystemresource'.
    2009-11-06 09:49:53.99 spid4s      The resource database build version is 9.00.4035. This is an informational message only. No user action is required.
    2009-11-06 09:49:54.16 spid9s      Starting up database 'model'.
    2009-11-06 09:49:54.17 spid4s      Server name is 'VIE-EU-ARC-02'. This is an informational message only. No user action is required.
    2009-11-06 09:49:54.19 Server      The certificate was successfully loaded for encryption.
    2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv6> 1433].
    2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv4> 1433].
    2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
    2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
    2009-11-06 09:49:54.19 Server      Server is listening on [ ::1 <ipv6> 1434].
    2009-11-06 09:49:54.19 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
    2009-11-06 09:49:54.19 Server      Dedicated admin connection support was established for listening locally on port 1434.
    2009-11-06 09:49:54.31 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
    2009-11-06 09:49:54.33 spid15s     Starting up database 'AdventureWorks'.
    2009-11-06 09:49:54.33 spid16s     Starting up database 'EnterpriseVaultDirectory'.
    2009-11-06 09:49:54.33 spid14s     Starting up database 'Test'.
    2009-11-06 09:49:54.33 spid12s     Starting up database 'AdventureWorksDW'.
    2009-11-06 09:49:54.33 spid17s     Starting up database 'EnterpriseVaultMonitoring'.
    2009-11-06 09:49:54.33 spid13s     Starting up database 'msdb'.
    2009-11-06 09:49:54.33 spid23s     Starting up database 'EVVSExchangeVaultStore_2'.
    2009-11-06 09:49:54.33 spid22s     Starting up database 'EVVSGVIE_2_2'.
    2009-11-06 09:49:54.33 spid24s     Starting up database 'EVVSJournalVaultStore_3'.
    2009-11-06 09:49:54.33 spid19s     Starting up database 'EVVSVIEIT_1'.
    2009-11-06 09:49:54.33 spid21s     Starting up database 'ReportServerTempDB'.
    2009-11-06 09:49:54.33 spid20s     Starting up database 'ReportServer'.
    2009-11-06 09:49:54.33 spid18s     Starting up database 'EVVSGVIEIT_1_1'.
    2009-11-06 09:49:54.56 spid9s      Clearing tempdb database.
    2009-11-06 09:49:54.61 spid19s     CHECKDB for database 'EVVSVIEIT_1' finished without errors on 2009-10-28 18:06:14.107 (local time). This is an informational message only; no user action is required.
    2009-11-06 09:49:54.65 spid23s     CHECKDB for database 'EVVSExchangeVaultStore_2' finished without errors on 2009-11-04 18:05:33.960 (local time). This is an informational message only; no user action is required.
    2009-11-06 09:49:54.71 spid24s     CHECKDB for database 'EVVSJournalVaultStore_3' finished without errors on 2009-11-04 18:05:51.793 (local time). This is an informational message only; no user action is required.
    2009-11-06 09:49:54.75 spid16s     CHECKDB for database 'EnterpriseVaultDirectory' finished without errors on 2009-11-04 18:06:38.103 (local time). This is an informational message only; no user action is required.
    2009-11-06 09:49:54.83 spid17s     CHECKDB for database 'EnterpriseVaultMonitoring' finished without errors on 2009-11-04 18:06:18.570 (local time). This is an informational message only; no user action is required.
    2009-11-06 09:49:54.99 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
    2009-11-06 09:49:55.55 spid9s      Starting up database 'tempdb'.
    2009-11-06 09:49:55.68 spid4s      Recovery is complete. This is an informational message only. No user action is required.
    2009-11-06 09:49:55.68 spid12s     The Service Broker protocol transport is disabled or not configured.
    2009-11-06 09:49:55.68 spid12s     The Database Mirroring protocol transport is disabled or not configured.
    2009-11-06 09:49:55.72 spid12s     Service Broker manager has started.
    Only the SQL Server Agent is unable to start,
    Eventlog:
    Log Name:      Application
    Source:        SQLSERVERAGENT
    Date:          06.11.2009 10:09:52
    Event ID:      103
    Task Category: Service Control
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      vie-eu-arc-02.global.domain
    Description:
    SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SQLSERVERAGENT" />
        <EventID Qualifiers="16384">103</EventID>
        <Level>2</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2009-11-06T09:09:52.000Z" />
        <EventRecordID>8486</EventRecordID>
        <Channel>Application</Channel>
        <Computer>vie-eu-arc-02.global.domain</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Unable to connect to server '(local)'; SQLServerAgent cannot start</Data>
      </EventData>
    </Event>
    SQLAgent.out Logfile:
    2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
    2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
    2009-11-06 10:09:52 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
    2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
    2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
    2009-11-06 10:09:52 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
    2009-11-06 10:09:53 - ? [098] SQLServerAgent terminated (normally)
    Additional the SQL Server Management Studio is unable to logon to the Server:
    TITLE: Connect to Server
    Cannot connect to vie-eu-arc-02.
    ADDITIONAL INFORMATION:
    A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
    The local Admin Password was reset to the "original" (after install) one.
    Any ideas how to fix the problem?

    Dear all,
    the encryption was NO on all protocols.
    Because no additional ideas available, i uninstalled the SQL Server on friday.
    At the Re-Install Process i got again an error:
    [Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
    other end of the pipe .
    The install process failed.
    On google i found the same problem in an other thread:
    http://groups.google.com/group/microsoft.public.sqlserver.connect/browse_thread/thread/dbec4a9a271f69a6/7cd22694da3a6062?lnk=st&q=%22Shared+Memory+Provider%3A+No+process+is+on+the+other+end+of+the+pipe%22&rnum=2&hl=en#7cd22694da3a6062
    ++++++
    During the installation process of SQL Server 2005, Setup complains it cannot
    connect to the database service for server configuration. The error was:
    [Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
    other end of the pipe .
    I have checked that the pipe exists (\\.\pipe\SQLLocal\MyInstance), but
    everytime the installer attempts the connecting the pipe is closed by the
    server and another is reopened. That's why the Client says there is no
    process on the other end of the pipe.
    I have re-installed 'everything', tried connections via TCP, but nothing
    works.
    I have made a small application to connect to the pipe and noticed that
    there are 3 instances of the pipe running, one that I am connecting to, and 2
    listening pipes. If I write to 'my' pipe SQL server disconnects the pipe and
    reopens another too. The difference is that SQL server writes an error
    message in the log file. No such luck when the Native client is doing the
    same.
    What more can I do?
    ++++++
    and an answer
    ++++++
    I finaly found the problem to be the certificate used.
    I noticed that a certificate was added to the machinekeys just recently.
    (in C:\Documents and Settings\All Users\Application
    Data\Microsoft\Crypto\RSA\MachineKeys)
    I renamed it to another name and re-installed sql server.
    I noticed that sql server ERRORLOG complained about certificate that it
    couldn't load and the generation of a self-generaed certificate (see below)
    "2005-12-10 21:01:02.30 Server      The server could not load the
    certificate it needs to initiate an SSL connection. It returned the following
    error: 0x8009030d. Check certificates to make sure they are valid.
    2005-12-10 21:01:02.49 Server      A self-generated certificate was
    successfully loaded for encryption."
    Now the installation succeeded
    ++++++
    With Windows 2008 it was really a challange to get access to this folder (!!!)
    After clearing the folder the ReInstall of SQL Server works fine.
    Now the SQL Server & the SQL Server Agent works again.
    The problem was anything with encryption, old certs & files.
    I don't think that everyone can afford reinstalling SQL server.
    I finaly found the problem to be the certificate used.
    I noticed that a certificate was added to the machinekeys just recently.
    (in C:\Documents and Settings\All Users\Application
    Data\Microsoft\Crypto\RSA\MachineKeys)
    I think this is what the following blog was saying , a problem with certification
    http://blogs.msdn.com/sql_protocols/archive/2006/07/26/678596.aspx
    Cheers
    Please mark as answer if you think this answers your questions

  • Odd Mail Server Setup Issues

    So after purchasing my new Xserve which i will be using as my company's primary mail server.
    i own a domain hosted by my ISP, and I have a static IP. I have also purchased a sonicwall pro 2040 firewall and have opened up the ports needed for the mail service smtp, pop, imap and web for webmail.
    I have already configured the MX and A settings with my ISP DNS server.
    i will be using an example.com as my domain.
    My current settings are,
    Computer Name : mail.example.com
    In Computer Services under Mail i have the following things checked off.
    General (the list below i have checked off)
    -> Enable Pop
    -> Enable SMTP
    -> Allow incoming mail
    domain :example.com
    hostname : mail.example.com
    Relay (the list below i have checked off)
    -> Accept SMTP relays only from these hosts and networks
    127.0.0.1/32
    my static ip
    my mail server local lan address
    -> Use these junk mail rejection servers
    zen.spamhaus.org
    Filters (the list below i have checked off)
    -> Scan email for Junk @ 5 junk score
    -> Scan email for virus and delete
    -> update the junk mail and virus 1 time a day
    Quotas
    -> Refuse incoming mail larger the 25MB
    Advanced
    Not sure what i should do here, my staff will be accessing email from all over north america and ideas i have played around a bit but nothing makes me able to set a mail client up to my server.
    Hosting -> local host and my domain.
    In my log files for mail access its also says empty option value on line 15 of the config file.
    Anyone have any ideas.

    You might also want to harden OSX.4 Tiger server against spam. I wrote an article which details implementing greylisting, blackholes, backscatter filtering, checking the sending mail server, recipient and email content. This supplements the anti-virus and spam checks already included in OSX Server to significantly reduce spam received and load on the mail server.
    Go http://happymac.info/node/10

  • [solved]xorg server 1.6 and dbus (???)

    hello everyone
    first of all, i'm fairly new to arch, however, i do have experience with linux. i've been using gentoo for about 4 years and a few other distributions before that.
    secondly, i'd like to apologize  if this is the wrong place to post this, but i couldn't really find a place where it'd fit in.
    today i've installed arch on my macbook (one of the late 2008 models) and so far, quite a few things work. there is, however, one thing i noticed as soon as i started dbus, keyboard events in xorg got repeated. to be more precise, if i hit the letter a, it would print an a on key press and another one on key release. i have xorg server 1.6.3.901-1.
    did anyone else have a similar problem and/or knows how this can be fixed?
    thanks in advance for anything that might help
    edit: quite oddly, a reboot (which did not help previously) fixed it this time...
    Last edited by MrDStar (2009-10-25 20:44:42)

    Thanks!
    xf86-video-intel
    xf86-input-synaptics
    from testing is the solution - more or less .
    testing disabled again:
    # pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    kdemod-core is up to date
    kdemod-extragear is up to date
    archlinuxfr is up to date
    :: Starting full system upgrade...
    warning: intel-dri: local (7.3-1) is newer than extra (7.2-2)
    warning: libgl: local (7.3-1) is newer than extra (7.2-1)
    warning: xf86-input-evdev: local (2.2.0-1) is newer than extra (2.1.2-1)
    warning: xf86-input-synaptics: local (1.1.0-1) is newer than extra (1.0.0-1)
    warning: xorg-server: local (1.6.0-1) is newer than extra (1.5.3-4)
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: intel-dri: requires libdrm>=2.4.4
    :: libgl: requires libdrm>=2.4.5
    Any ideas?
    Last edited by Llama (2009-03-31 19:15:25)

Maybe you are looking for

  • Alert for file not getting picked up

    Hi, how to create an alert when the file is not picked by adapter..consider a file adapterr... i mean the file is at the location...for some reasons the file is not being picked up....how to trigger an laert based on this.

  • PROBLEMS WITH VIDEORA CONVERTER

    hello. i went and downloaded a dvd encrypter and the videora ipod converter. the video itself has been converted, AND in itunes but when i try to drag it to my ipod it says it could not go in my ipod cause my ipod will not play it. please help!!!

  • Searched links don't change color

    Links I've already searched (inGoogle) used to change color. They no longer do. I've tried dong the reset but it makes no difference. What else can I do?

  • HT4539 can i read ibooks on my laptop and if so how?

    can i read ibooks on my laptop in itunes and if so how?

  • Hp paviion dv 6915nr sound, network, CD-ROM problems

    I had problems with sound, network, CD-ROM 3 month ago. Sometimes it worked all together, sometimes not. I mean problems were everytime together. No sound, no network (exept wireless), no CD-ROM. Now it doesnt work constantly. Other parts of my Lapto