[SOLVED] xorg/arch mouse scroll

Hi, I am stuck with this and could not find an answer in the Forum (sorry if I missed...)
I installed both archbang and archlinux (arch+xorg+openbox, nothing else) in virtualbox. In archbang the mouse wheel works perfectly, in arhclinux it does not work at all. The config files are the same in /etc/X11/xorg.conf.d/.
Can some tell me what I need to do in archlinux to enable mouse scroll? Thanks in advance!
Last edited by totolotto (2012-11-14 21:40:58)

Unbelieveable... yes that was the problem! I simply skip that becasue everything "seemed" working fine. Thanks again!
After installing virtualbox I was hoping that would solve my other problem, that is I cannot install .bzr packages from AUR as the process stops at " Connecting to Bazaar server" with server timeout message. Until this point everything is fine. Can you probably help in that too?

Similar Messages

[SOLVED]Xorg.conf, mouse config problem

The Rapoo M765 mouse can not work properly under normal mouse configuration.
The mouse goes beyond controll when config as below:
hacksign@XSign [14:13:13] : ~
>> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
#Section "InputClass"
# Identifier "Mouse2"
# MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
# MatchIsPointer "yes"
# MatchDevicePath "/dev/input/event*"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Emulate3Buttons" "no"
# Option "Buttons" "7"
# Option "ButtonMapping" "1 2 3 6 7"
#EndSection
When there is no any configuration, the mouse can work abnormally. Movement and right/left click work fine, but I can not use scroll wheel,and the "go forward"&"go backward" mouse key can not work too.
(I know Option "ZAxisMapping" "4 5" is the configuration of scroll wheel emulation.)
The real problem is 'mouse beyond controll',the cursor goes crazyly on screen ....
I guess it is something wrong of ButtonMapping option. But when I tried to get button number from command xev,when scroll wheel scrolles, I get something below(the scroll wheel movement is identified as a key event~):
//left click
ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3766452, (135,143), root:(2287,595),
state 0x0, button 1, same_screen YES
ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3766588, (135,143), root:(2287,595),
state 0x100, button 1, same_screen YES
//right click
ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3767716, (135,143), root:(2287,595),
state 0x0, button 3, same_screen YES
ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3767852, (135,143), root:(2287,595),
state 0x400, button 3, same_screen YES
//mouse scroll, identified as keyboard event(?)
KeyRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
state 0x0, keycode 123 (keysym 0x1008ff13, XF86AudioRaiseVolume), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
state 0x0, keycode 122 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
here is some Information(I dont know why the mouse is identified as 'type:KEYBOARD'):
hacksign@XSign [14:55:03] : ~
>> xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ RAPOO RAPOO 2.4G Remote Mouse id=13 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=15 [slave pointer (2)]
⎜ ↳ TPPS/2 IBM TrackPoint id=16 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Sleep Button id=8 [slave keyboard (3)]
↳ Heng Yu Technology Poker Pro S id=9 [slave keyboard (3)]
↳ Heng Yu Technology Poker Pro S id=10 [slave keyboard (3)]
↳ Integrated Camera id=11 [slave keyboard (3)]
↳ RAPOO RAPOO 2.4G Remote Mouse id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
↳ ThinkPad Extra Buttons id=17 [slave keyboard (3)]
hacksign@XSign [14:55:06] : ~
>> xinput list-props 13
Device 'RAPOO RAPOO 2.4G Remote Mouse':
Device Enabled (142): 1
Coordinate Transformation Matrix (144): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (270): 0
Device Accel Constant Deceleration (271): 1.000000
Device Accel Adaptive Deceleration (272): 1.000000
Device Accel Velocity Scaling (273): 10.000000
Device Product ID (260): 9390, 8192
Device Node (261): "/dev/input/event8"
Evdev Axis Inversion (274): 0, 0
Evdev Axes Swap (276): 0
Axis Labels (277): "Rel X" (152), "Rel Y" (153), "Rel Horiz Wheel" (267), "Rel Dial" (268), "Rel Vert Wheel" (269)
Button Labels (278): "Button Left" (145), "Button Middle" (146), "Button Right" (147), "Button Wheel Up" (148), "Button Wheel Down" (149), "Button Horiz Wheel Left" (150), "Button Horiz Wheel Right" (151), "Button Side" (265), "Button Extra" (266), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263)
Evdev Scrolling Distance (279): 1, 1, 1
Evdev Middle Button Emulation (280): 0
Evdev Middle Button Timeout (281): 50
Evdev Third Button Emulation (282): 0
Evdev Third Button Emulation Timeout (283): 1000
Evdev Third Button Emulation Button (284): 3
Evdev Third Button Emulation Threshold (285): 20
Evdev Wheel Emulation (286): 0
Evdev Wheel Emulation Axes (287): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (288): 10
Evdev Wheel Emulation Timeout (289): 200
Evdev Wheel Emulation Button (290): 4
Evdev Drag Lock Buttons (291): 0
hacksign@XSign [14:55:14] : ~
>> grep -i rapoo /var/log/Xorg.0.log
[ 29.102] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event7)
[ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.102] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 29.102] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
[ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 29.102] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 29.102] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
[ 29.103] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.103] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.103] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
[ 29.104] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
[ 29.104] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
[ 29.104] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
hacksign@XSign [14:59:47] : ~
>> yaourt -Q|grep -i 'input-'
local/xf86-input-evdev-trackpoint 2.9.1-1
extra/xf86-input-keyboard 1.8.0-3 (xorg-drivers xorg)
extra/xf86-input-mouse 1.9.1-1 (xorg-drivers xorg)
extra/xf86-input-synaptics 1.8.1-1 (xorg-drivers xorg)
Last edited by Hacksign (2015-01-14 02:22:51)

Thanks for reply !
change Driver 'mouse' to Driver 'evdev',solved cursor goes beyond controll problem.
but I still can not use scroll button and 'go forward'&'go backward' button.
(BTW:evdev_drv.so is from local/xf86-input-evdev-trackpoint, and local/xf86-input-evdev-trackpoint package is from AUR)
I think, maybe something wrong with my button number mapping, but I still can not get scroll button number with 'xev' command....
below is my configuration:
hacksign@XSign [17:15:19] : /var/log
>> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
Section "InputClass"
Identifier "Mouse2"
MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
MatchIsPointer "yes"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "Protocol" "auto"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "Buttons" "9"
Option "ButtonMapping" "1 2 3 6 7 8 9 4 5"
EndSection
and here is Xorg.0.log
[ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 11357.287] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 11357.287] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
[ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 11357.287] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 11357.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:24AE:2000.0003/input/input8/event7"
[ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
[ 11357.288] (**) Option "xkb_rules" "evdev"
[ 11357.288] (**) Option "xkb_model" "pc104"
[ 11357.288] (**) Option "xkb_layout" "us"
[ 11357.288] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "Mouse2"
[ 11357.288] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: ButtonMapping '1 2 3 6 7 8 9 4 5'
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
[ 11357.288] (**) Option "Emulate3Buttons" "no"
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11357.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:24AE:2000.0004/input/input9/event8"
[ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
[ 11357.288] (**) Option "xkb_rules" "evdev"
[ 11357.288] (**) Option "xkb_model" "pc104"
[ 11357.288] (**) Option "xkb_layout" "us"
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
[ 11357.288] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
[ 11357.289] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
[ 11357.289] (II) No input driver specified, ignoring this device.
[ 11357.289] (II) This device may have been added with another device file.
olive wrote:In the config file you mentioned, all is commented; do you mean that you have problems when you have uncommented it? You should not use the mouse driver (old deprecated driver) but evdev. Try to remove xf86-input-mouse and xf86-input-keyboard (same as before, this is deprecated and handled by evdev) and remove also a "joystick" driver if you have it (I have had problem with it conflicting with the evdev driver).
Last edited by Hacksign (2015-01-13 09:27:06)

[SOLVED] Xorg and mouse with HAL doesn't work

Hi
I recently reinstalled Arch Linux and I have some problems... My mouse isn't working - at all! I'm using an HP Compaq 6510b.
I've installed the following packages:
* xf86-input-evdev
* hal
* dbus
I don't have an xorg.conf file at all, as I heard that hal should solve everything automagically for me. This seems to not be the case?
Any ideas? Thanks
Last edited by skorpan (2009-06-05 18:41:51)

Yeah, I'm doing that!
BTW, Xorg.0.log is here: http://dpaste.com/51933
Last edited by skorpan (2009-06-05 17:58:31)

The mouse scroll wheel doesn't work with Xorg

I recently installed Solaris 10 on my x86 box. One issue is that the mouse scroll wheel doesn't work with Xorg. Hmmm... Okay, it sometimes did work, and most of the time went on strike, and recovered at random. This pattern continued.
My mouse is an ordinary PS/2 one with two buttons and a scroll wheel. I want to promise that there's absolutely nothing wrong with it per se. Here is some info:
$ uname -a
SunOS arbiter 5.10 Generic_127112-07 i86pc i386 i86pc
$ grep -i mouse /var/log/Xorg.0.log
(**) |-->Input Device "Mouse0"
(II) LoadModule: "mouse"
(II) Loading /usr/X11/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
(==) NVIDIA(0): Silken mouse disabled
(II) Mouse0: Setting Device option to "/dev/mouse"
(**) Mouse0: Protocol: VUID
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
# The section about mouse in /etc/X11/xorg.conf follows:
Section "InputDevice"
        Identifier "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/mouse"
        Option      "Buttons" "5"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "false"
EndSection
# Note that the only result of explicitly changing protocol to ExplorerPS/2, PS/2, IMPS/2 or whatever else is that the cursor jumped here and there and everywhere when I moved the mouse.I ever post one in comp.unix.solaris to ask for help but got no effective solution. Thank you all.

You remember correctly, Yvan.
The 6.2.9 updater is available http://www.apple.com/support/downloads/appleworks629formac.htmlhere. Note that the updater is language specific. The one at the top of the list is for the International English version of AppleWorks. The US English version is the one in the box at the upper right, identified only by its file size.
Regards,
Barry

Emulate mouse scroll with keyboard [solved]

I'd like to be achieve a mouse scroll wheel functionality with keyboard, that is, to be able to scroll n lines by using a keyboard shortcut. Page up/down jumps too much and arrow up/down is quite slow and not so eye-friendly. So I'd like to be able to scroll, say, five lines down when pressing something like Ctrl + arrow down.
I'm using KDE 4.3 at the moment and couldn't find anything related in the settings, so I'm guessing it requires a bit more effort. Would it be possible to map some keys into sending an event similar to the event that is caused by scrolling the scroll wheel? I tried to see what xev says about scrolling the wheel, but that didn't help much.
Last edited by peabrain (2009-08-19 23:43:23)

Maybe xbindkeys with xdotool, but I don't know if this is without lag.
Something like this in .xbindkeysrc
"xdotool key --clearmodifiers Up Up Up Up Up"
Control + Up

[Solved] xorg "no screens found" on laptop with nvidia + intel Optimus

Startx gives fatal server error:(EE) no screens found
After installing arch on my laptop, I followed the xorg arch wiki to install the Xwindow system.
I installed xorg-server, startx
lspci -k | grep -A -2 -i "VGA" shows two graphic cards (see below). I guess the I am using the NVIDIA.
I installed nvidia-utils-337.12-1 , nvidia-337.12-1, nvidia-libgl-337.12-1
After that I ran nvidia-xconfig
startx gives the above error.
What can I try next?
Best,
Sjoerd
This are the log files:
lspci -k | grep -A -2 -i "VGA"
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 15a7
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1)
Subsystem: ASUSTeK Computer Inc. GeForce GT 650M
Kernel driver in use: nvidia
lsmod
Module Size Used by
isofs 32820 0
usb_storage 49255 1
joydev 10367 0
mousedev 10912 0
uvcvideo 74492 0
videobuf2_vmalloc 3368 1 uvcvideo
videobuf2_memops 2239 1 videobuf2_vmalloc
btusb 19720 0
videobuf2_core 28999 1 uvcvideo
bluetooth 352753 2 btusb
videodev 122691 2 uvcvideo,videobuf2_core
media 12611 2 uvcvideo,videodev
6lowpan_iphc 11556 1 bluetooth
nvidia 10784100 0
arc4 2064 2
asus_nb_wmi 7400 0
coretemp 6550 0
asus_wmi 16605 1 asus_nb_wmi
intel_rapl 12332 0
sparse_keymap 3242 1 asus_wmi
hwmon 3153 2 coretemp,asus_wmi
x86_pkg_temp_thermal 7311 0
intel_powerclamp 9442 0
mxm_wmi 1595 0
kvm_intel 134316 0
iwldvm 171439 0
iTCO_wdt 5535 0
iTCO_vendor_support 1929 1 iTCO_wdt
kvm 419974 1 kvm_intel
nls_iso8859_1 4485 2
led_class 3611 2 iwldvm,asus_wmi
i915 752620 1
mac80211 510355 1 iwldvm
crct10dif_pclmul 4714 0
nls_cp437 6017 2
crc32_pclmul 2955 0
crc32c_intel 14217 0
ghash_clmulni_intel 4362 0
aesni_intel 144871 0
vfat 10631 2
aes_x86_64 7463 1 aesni_intel
fat 53688 1 vfat
lrw 3821 1 aesni_intel
gf128mul 6018 1 lrw
glue_helper 4737 1 aesni_intel
ablk_helper 2100 1 aesni_intel
cryptd 8537 3 ghash_clmulni_intel,aesni_intel,ablk_helper
iwlwifi 151777 1 iwldvm
psmouse 92904 0
snd_hda_codec_realtek 47141 1
snd_hda_codec_generic 53860 1 snd_hda_codec_realtek
microcode 17157 0
cfg80211 459335 3 iwlwifi,mac80211,iwldvm
evdev 11784 5
mac_hid 3273 0
serio_raw 5009 0
atl1c 38426 0
pcspkr 2059 0
i2c_i801 11364 0
rfkill 15971 3 cfg80211,bluetooth,asus_wmi
snd_hda_intel 38728 0
drm_kms_helper 35720 1 i915
snd_hda_codec 101816 3 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
button 4765 1 i915
snd_hwdep 6396 1 snd_hda_codec
drm 242043 3 i915,drm_kms_helper,nvidia
snd_pcm 81607 2 snd_hda_codec,snd_hda_intel
snd_timer 19038 1 snd_pcm
mei_me 9776 0
snd 60086 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
intel_gtt 12856 1 i915
i2c_algo_bit 5480 1 i915
thermal 8812 0
soundcore 5551 1 snd
tpm_tis 9310 0
i2c_core 25400 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
video 12057 2 i915,asus_wmi
mei 65662 1 mei_me
processor 25217 0
lpc_ich 13560 0
wmi 8539 2 mxm_wmi,asus_wmi
battery 7821 0
tpm 23363 1 tpm_tis
shpchp 25706 0
intel_rst 2372 0
ac 3366 0
ext4 505317 2
crc16 1359 2 ext4,bluetooth
mbcache 6266 1 ext4
jbd2 86487 1 ext4
sd_mod 37170 8
crc_t10dif 1135 1 sd_mod
crct10dif_common 1436 2 crct10dif_pclmul,crc_t10dif
atkbd 16934 0
libps2 4507 2 atkbd,psmouse
ahci 24043 4
libahci 21708 1 ahci
libata 174012 2 ahci,libahci
ehci_pci 4152 0
xhci_hcd 147645 0
ehci_hcd 64875 1 ehci_pci
scsi_mod 137184 3 usb_storage,libata,sd_mod
usbcore 186974 6 btusb,uvcvideo,usb_storage,ehci_hcd,ehci_pci,xhci_hcd
usb_common 1712 1 usbcore
i8042 13135 1 libps2
serio 10785 9 serio_raw,atkbd,i8042,psmouse
/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.12 (buildmeister@swio-display-x64-rhel04-11) Fri Apr 4 15:17:56 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/log/Xorg.0.log
[ 1860.296]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 1860.302] X Protocol Version 11, Revision 0
[ 1860.304] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 1860.306] Current Operating System: Linux zen 3.14.2-1-ARCH #1 SMP PREEMPT Sun Apr 27 11:28:44 CEST 2014 x86_64
[ 1860.306] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2
[ 1860.309] Build Date: 14 April 2014 08:39:09AM
[ 1860.311]
[ 1860.313] Current version of pixman: 0.32.4
[ 1860.316] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1860.316] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1860.324] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 5 12:22:24 2014
[ 1860.326] (==) Using config file: "/etc/X11/xorg.conf"
[ 1860.327] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1860.328] (==) ServerLayout "Layout0"
[ 1860.328] (**) |-->Screen "Screen0" (0)
[ 1860.328] (**) | |-->Monitor "Monitor0"
[ 1860.328] (**) | |-->Device "Device0"
[ 1860.328] (**) |-->Input Device "Keyboard0"
[ 1860.328] (**) |-->Input Device "Mouse0"
[ 1860.328] (==) Automatically adding devices
[ 1860.328] (==) Automatically enabling devices
[ 1860.328] (==) Automatically adding GPU devices
[ 1860.328] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1860.328] Entry deleted from font path.
[ 1860.328] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1860.328] Entry deleted from font path.
[ 1860.328] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1860.328] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1860.328] Entry deleted from font path.
[ 1860.328] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1860.328] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1860.328] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1860.328] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1860.328] (WW) Disabling Keyboard0
[ 1860.328] (WW) Disabling Mouse0
[ 1860.328] (II) Loader magic: 0x804c80
[ 1860.328] (II) Module ABI versions:
[ 1860.328] X.Org ANSI C Emulation: 0.4
[ 1860.328] X.Org Video Driver: 15.0
[ 1860.328] X.Org XInput driver : 20.0
[ 1860.328] X.Org Server Extension : 8.0
[ 1860.328] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1860.328] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1860.330] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 1860.330] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 1860.330] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1860.332] Initializing built-in extension Generic Event Extension
[ 1860.333] Initializing built-in extension SHAPE
[ 1860.335] Initializing built-in extension MIT-SHM
[ 1860.337] Initializing built-in extension XInputExtension
[ 1860.338] Initializing built-in extension XTEST
[ 1860.340] Initializing built-in extension BIG-REQUESTS
[ 1860.342] Initializing built-in extension SYNC
[ 1860.343] Initializing built-in extension XKEYBOARD
[ 1860.345] Initializing built-in extension XC-MISC
[ 1860.346] Initializing built-in extension SECURITY
[ 1860.348] Initializing built-in extension XINERAMA
[ 1860.349] Initializing built-in extension XFIXES
[ 1860.350] Initializing built-in extension RENDER
[ 1860.352] Initializing built-in extension RANDR
[ 1860.353] Initializing built-in extension COMPOSITE
[ 1860.355] Initializing built-in extension DAMAGE
[ 1860.356] Initializing built-in extension MIT-SCREEN-SAVER
[ 1860.357] Initializing built-in extension DOUBLE-BUFFER
[ 1860.358] Initializing built-in extension RECORD
[ 1860.360] Initializing built-in extension DPMS
[ 1860.361] Initializing built-in extension Present
[ 1860.362] Initializing built-in extension DRI3
[ 1860.364] Initializing built-in extension X-Resource
[ 1860.365] Initializing built-in extension XVideo
[ 1860.366] Initializing built-in extension XVideo-MotionCompensation
[ 1860.367] Initializing built-in extension XFree86-VidModeExtension
[ 1860.368] Initializing built-in extension XFree86-DGA
[ 1860.369] Initializing built-in extension XFree86-DRI
[ 1860.370] Initializing built-in extension DRI2
[ 1860.370] (II) LoadModule: "glx"
[ 1860.371] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1860.382] (II) Module glx: vendor="NVIDIA Corporation"
[ 1860.382] compiled for 4.0.2, module version = 1.0.0
[ 1860.382] Module class: X.Org Server Extension
[ 1860.382] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:34:00 PDT 2014
[ 1860.383] Loading extension GLX
[ 1860.383] (II) LoadModule: "nvidia"
[ 1860.383] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1860.383] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1860.383] compiled for 4.0.2, module version = 1.0.0
[ 1860.383] Module class: X.Org Video Driver
[ 1860.383] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:13:45 PDT 2014
[ 1860.383] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1860.383] (++) using VT number 2
[ 1860.384] (EE) No devices detected.
[ 1860.384] (EE)
Fatal server error:
[ 1860.384] (EE) no screens found(EE)
[ 1860.384] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1860.384] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1860.384] (EE)
Last edited by sjdh (2014-05-05 14:05:34)

Hi Karol,
Thank you for the suggestion. I read the wiki Nvidia#No_screens_found_on_a_laptop.2FNVIDIA_Optimus .
It says "On a laptop, if the NVIDIA driver cannot find any screens, you may have an NVIDIA Optimus setup : an Intel chipset connected to the screen and the video outputs, and a NVIDIA". This seems to be the case for my latop.
The wiki suggests three options to get around the problem:
1) NVIDIA drivers now offer Optimus support since 319.12 Beta [[3]] with kernels above and including 3.9.
2) Another solution is to install the Intel driver to handle the screens
3) Enter the BIOS and changed the default graphics setting from 'Optimus' to 'Discrete' and the install NVIDIA drivers
I tried them all:
1) I had NVIDIA driver version 337 installed, but I don't know how to turn on Optimus support
3) I check my bios settings, but there is no such option
2) I removed the nvidia drivers and then installed intel drivers. I removed /etc/x11/xorg.conf
startx now find screens. I guess there is no 2d or 3d acceleration, but it works
Thank you
Sjoerd

Spice on KVM, mouse scrolling no longer works

Hi,
Using a redhat workstation, I have installed archlinux on KVM using virt-manager, set the display to spice and video to qxl. On the guest arch linux, I have installed from AUR xf86-video-qxl and spice-vdagent. So far so good. However, scrolling using the wheel mouse does not work anymore when the spice-vdagentd is running. If I stop spice-vdagent, scrolling works again.
Anybody have a workaround with spice-vdagent and mouse scrolling?
Thanks in advance.

It probably needs a clean the instructions are at
http://docs.info.apple.com/article.html?artnum=302417
I clean the scroll ball about every 4 weeks or so
chris

Mouse scroll wheel do not command Photoshop input fields correctly

Hi guys,
Some general info:
1. I have Logitech Keyboard K800 - it have its own receiver
2. I have Logitech Mouse (MX1100) - it have its own receiver
3. Photoshop CS6 x64 - latest updates
4. Windows 7 x64 - latest updates
5. SetPoint - latest version
6. More about the system (please let me know if I have to post all the text from Photoshop System Info popup):
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3410 MHz
Built-in memory: 16342 MB
Free memory: 9098 MB
Memory available to Photoshop: 14718 MB
Memory used by Photoshop: 90 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560
OpenCL Version:
Driver Version: 9.18.13.1090
Driver Date: 20121229000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92298292820550253494
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\kckfm\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 685.6G, 198.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Some other info:
You know that you can control Photoshop input fields http://screencast.com/t/ApVseKYRxz with the mouse scroll wheel. Pretty handy indeed. You just have to click on the field and spin the wheel and values changing.
The problem:
My mouse wheel cannot control the input fields in this way. I select the field, spin the wheel and nothing happen. When I spin it faster a couple of times, than the values get changing - pretty strange ha? Scrolling normally - do not change, scrolling fast change. But to scroll fast is not an option because I cannot change the values slightly with small increments... There is a bug really...
What I tried and didn't work:
1. Restarted Photoshop
2. Plug/Unplug and change different USB slots for both receivers.
3. Reintalling latest SetPoint Drivers (after uninstall I run ccleaner)
4. Put all SetPoint settings to defaults (because I programmed some mouse keys to Photoshop specifically).
5. Install earlier versions of SetPoint drivers.
6. Set my UEFI BIOS to defaults.
7. Restarted the BIOS to load all the drivers again, but still no luck
(the last think I didn't do is to reinstall Photoshop)
What I have investigated so far:
1. When I restart the computer and run Photoshop it works perfect HA! , but after a seconds it do not words again ...
2. When I stop SetPoint software, when I shut down it, it words perfect.
3. When I unplug keyboard receiver it words perfect, but I do not have keyboard:)
4. Everything works perfect in Illustrator and After effects.
5. Also I noticed that when I scroll images in CameraRaw - http://screencast.com/t/xKnn6cY9 the I have to scroll harder and spin the wheel harder to scroll - the same problem.
6. Also in photoshop and bridge scrolling here - is pretty smooth and works perfect - http://screencast.com/t/75IXMG6Zria
Maybe the most important part - When I start experiencing the problem:
I had same configuration , same everything and everything worked fine.
I installed SSD disk, reinstalled Windows (same like before), updated my BIOS to UEFI. Installed Photoshop and SetPoint and problem started.
Posted same request to Logitech, but want to ask you for help too.
Thanks!

Hi all,
I found a solution.
1. Uninstall your current Setpoint Driver.
2. Run CCleaner - http://www.piriform.com/ccleaner
3. Download an older version of SetPoint - http://www.oldapps.com/setpoint.php
(I used SetPoint 6.15 (x64), I tried 6.20, 6.32, 6.50 , but no luck)
4. Now everything is all right!
Thanks!
Can somebody mark this as solved? Thanks!
SK

System Settings will not save my desired mouse scroll direction

I understand the Apple genius of wanting the Settings: Mouse: Scroll direction: Natural box to be checked. But **** it, this is MY iMac and I want the scroll direction to remain Unchecked, so the screen scrolls in the direction I’ve been used to for YEARS.
The problem is the System Settings will not save the unchecked scroll box. I have to return to the System Settings every time I log on to UN check the Scroll Direction: Natural box.
Will Apple ever fix this so that I, and others, can operate the scrolling as THEIR LONG-TIME USER sees fit?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Magic Mouse (Scrolling and Swiping)

I know this has been asked several times, but I have gone through most of the posts to try and find a solution, and nothing has helped.
I initially lost scroll and swipe about 6 months ago, and ended up downloading MagicDriver (which has now expired and will not be developed any further). That was a solution for the time being. I've killed off the USBdriver file, I've reset everything I could reset, I've even gone so far as to buy a NEW magic mouse, thinking perhaps my "old" one was having issues.
But, I'm still unable to scroll or swipe.
I've tried turning my mouse on and off, and now it won't even connect to the computer... I'm kind of at a loss for what to do at this point.

I have had all the slow and other cursor problems described and was becoming desperate with withdrawal symptoms having had to use a wired standard WIndows mouse.
PROBLEM SOLVED - I noticed horizontal scrolling had improved whereas vertical was still appalling.
CLEANED THE MOUSE LENSES with spectacle cloth and cleaning fluid - cloth dampened.
Everything now BEAUTIFUL! and I am able to do amazing things having set up variousa options with MagicPrefs

Loss of Mouse Scroll Wheel Function

I took a leap and a leap of faith upgrading from Firefox 3.something to 11.0. I'm working through the little annoying differences in the user interface, but I'm having a problem with scrolling.
I can't put my finger on any particular web site or page size, but I find that occasionally my mouse scroll wheel will stop working with Firefox and I must use the scroll bar to move through a document. Once it goes, it's gone. I can move to another tab that previously scrolled with the wheel and it no longer does.
If I close Firefox and restart it, the scroll wheel works again (even with the page on which it previously quit. If I leave Firefox running but switch to another application, the scroll wheel works there, so it's unlikely that the driver has become corrupted.
I'm running Windows XP SP3 and Firefox 11.0 (downloaded and installed 4/5/2012)

I doubt that I have a PDF open in another tab because I don't use the PDF plug-in to Firefox. When I go to a web site with a PDF and click on it, I get a pop-up that asks if I want to open it (I use Foxit) or save the file. I often have a PDF open when I'm on a web site however. I just opened one and everything's still OK. Then I went to a web site where I clicked on a PDF and told it to open it with Foxit, and things are still OK.
Like I said, I haven't yet found anything that consistently makes it happen.
As for updates, I really want to know if there's anything specific that might cause this problem. I don't like to make updates, not even Windows updates, unless I see that the update either solves a problem or gives me a feature that I really need. I look at the Windows updates and they all seem to be about security, which isn't a problem here. In the case of installing the new Firefox, I was getting tired of web sites telling me that I had an unsupported web browser (though usually I could get what I wanted). I'm NOT going to just let Windows do what it wants with my computer. I depend on it too much to do that.
Could it be that something that Firefox needs is running out of memory after browsing for a while? Is there something I could check for that? I think I have 1 GB of RAM in this Pentium 4.

[close]testing xorg, evdev mouse, keyboard problems

found this thread http://bbs.archlinux.org/viewtopic.php?id=44311
just updated this morning, have testing active. running KDEmod, my mouses movement now seem to be restricted to a verticle movement up and down screen, keyboard also seems to be exhibiting some strange behaviour. I'm guessing this is something to do with evdev,hal changes mentioned in the upgrade help text. Anybody got any ideas?
thanks
Last edited by sykesm (2008-02-23 11:57:13)

Does export SDL_VIDEO_X11_DGAMOUSE=0 in your .bashrc and restarting X help? Or if that doesn't work does recompiling Xorg with https://bugs.freedesktop.org/show_bug.cgi?id=13808 help? well i don't think so... I think this is a udev issue where udev changes & creates new devices confusing the X server thus leading to the plethora of problems mentioned here: https://bugs.freedesktop.org/buglist.cg … arch=mouse where the keyboard can sometimes influence the mouse etc.. I know iv'e had a bunch of these errors previously..

Mouse Scroll Wheel Broken in Commenting Pane

Hello,
In Acrobat XI Pro, the mouse scroll wheel does not work for me in the Comments List area of the Comment pane. I've read other posts where users are reporting the same problem. This worked in Acrobat X.
I'm a technical writer and frequently get upwards of 50 comments in a PDF that I need to scroll through. It is a huge time waster to use the arrow keys or move my mouse to click. Adobe, is there a fix for this problem? I'm running Windows 7 64-bit and I've tried two different mice.
Thanks!
Justin

Found the problem. For years the mouse portion of my xorg.conf said
protocol PS/2
... as noted previously, that always worked, including scroll wheel usage. But a little hunting turned up the advice to change it to IMPS/2 and now it works again. For the record, the complete entry now says:
Section "InputDevice"
Identifier "Maus"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "CorePointer"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection

Is it possible to Override Flex Default behaviour of loading Images on mouse scroll over ??

Hi ,
I am displaying Images on to a DataGrid .
This works fine .
My question is that , Flex 3 is not loading all the Images at once , its loading Sometimes on mouse scroll down on a
browser and sometimes on Mouse down .
I dont want to have this behaviour , is it possible to override such behaviour and load all the Images at once ??

Hi,
What has been going wrong with your post ? You can use external USB sound card for your laptop. Here are few of them:
http://www.shopbot.com.au/external-sound-card-usb/price/australia/582295
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adobe Muse - Smooth Scrolling to Anchors Using Mouse Scroll

I am wondering if there is a way to set up smooth scrolling to anchors with the mouse scroll in adobe muse. I can do it using links, but it would be great if the user could just start scrolling and it smoothly jumps to the next section. This looks great and would solve the issues created by variant mouse wheel speeds. Any help would be great, thanks!
Here is an example: Layers

There is a widget that does this quite well. I posted it earlier, but it mist have had a mistake... or someone deleted it? Oh well, if it disappears I wont repost it haha.
https://creative.adobe.com/addons/products/3144#.VCCyYvldWOY

[SOLVED] xorg/arch mouse scroll

Similar Messages

Maybe you are looking for