[SOLVED] Xorg Hotplug, Openbox, CLI and native characters and fonts
-- according to a suggestion from: http://bbs.archlinux.org/viewtopic.php? … 82#p683282 am posting this as a separate thread--
Does anyone happen to encounter the following problem.
Before the update: no local (polish) characters in the GUI apps when I type (openbox) but the characters in CLI apps run under openbox display fonts correctly while typing
After the update, situation is reversed (i have tried to configure the hal policy but apparently I am missing something)
GUI apps under openbox display polish fonts correctly when I type and CLI apps (tilda, gvim, etc) dispplay '?' instead of local charcters when I type
Displaying previously created files which include polish characters display squares insted of the aforementioned glyphs.
I have tried numerous hints found on the web:
- modification of the 10-keymap.fdi file
- regenerate locale
- set xset fp+ /usr/share..
...but I'm running out of ideas.
So if any of you knows how to get rid of that crappy behaviour please share your priceless knowledge smile
BTW. under KDE everything seems to work fine...
Last edited by psycepa (2010-05-04 22:01:28)
locale -a
C
POSIX
en_US
en_US.iso88591
en_US.utf8
pl_PL
pl_PL.iso88592
pl_PL.utf8
polish
I am using Terminus for most of my CLI apps.
The Konsole app is somehow and exception if I set Terminus Font and UTF-8 or ISO-8859-2 encoding, but the fonts are ugly, like here:
other apps do not work no matter what I set.
The point is it was working well before xorg hotplugging was enabled. Afterwards...you can see yourelf...
@tomk: I'll try, but this should have nothing to do with specific nation whatsoever
edit:
I don't know if that does matter but its arch64...
Last edited by psycepa (2010-01-07 13:28:29)
Similar Messages
-
[SOLVED] Xorg crashes with radeon xpress 200, KDE and no KMS
Hi all, I'm experiencing an annoying problem with Arch. I'm using the xf86-video-ati driver, and in KDE 4.3.2, with compositing enabled, everytime I open a new window of any program and already having other window opened (for example, opening konsole and then opening chromium), X dies and goes to KDM login. I've made some tests and figured out that this occurs only when ati kernel modesetting is disabled and KWin's compositing is enabled. But when I enable modesetting, 3D compositing turns very slow. Is this problem ocurring with anyone else?
Everytime X dies, this message appears when I run dmesg:
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] Num pipes: 4
[drm] writeback test succeeded in 1 usecs
Here's my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "8174"
EndSection
Section "Device"
Option "AccelDFS" "true"
Option "AccelMethod" "EXA"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RC410 [Radeon Xpress 200M]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Thanks in advance.
Last edited by countercraft (2009-11-12 03:32:48)countercraft wrote:Hi all, I'm experiencing an annoying problem with Arch. I'm using the xf86-video-ati driver, and in KDE 4.3.2, with compositing enabled, everytime I open a new window of any program and already having other window opened (for example, opening konsole and then opening chromium), X dies and goes to KDM login. I've made some tests and figured out that this occurs only when ati kernel modesetting is disabled and KWin's compositing is enabled. But when I enable modesetting, 3D compositing turns very slow. Is this problem ocurring with anyone else?
Hi, I have extactly the same problem. Have you already rebuilt those patched mesa, libgl, and ati-dri?
This problem is really annoying, not least for coming so unexpected. But, as for me, I don't have time (and to be honest, any desire) to rebuild those with some cryptic patches. I just wonder, how such a big failure made into a mesa package?
[EDIT]: I reinstalled the KDE packages yesterday, I didn't encounter this problem in GNOME.
Last edited by Mad Max (2009-12-02 13:12:29) -
Gmail and native client and security
Hello everyone
Gmail has an option on the web for secure https login. I worry about push login over public transport wifi. Is this secure? I am not sure what ssl is and whether it encrypts each email as well as log in information.,
EricSSL is what is used by Microsoft Outlook to grab emails over a secure port. Your information will be just as secure if you're using SSL on your PlayBook as if you were using it on Outlook.
I hope that helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution! -
Reporting Services in both SharePoint 2013 connected and native mode?
Is it possible to configure Reporting Services (SQL Server 2014) to support both SharePoint 2013 connected mode and local Report Server in native mode on the same server using multiple instances of RS? The reason for this setup is to avoid having to purchase
SharePoint Enterprise CALs for other users than analysts and still be able to publish standard reports to all employees.
Management and analysts -> Custom reports published through SharePoint 2013 Enterprise (SP2013 ECALs and SQL Server 2014 core license). Data alerts and Power View enabled if possible.
All employees -> Standard reports published through Native Mode Report Server (SQL Server 2014 core license). Possible subscriptions.
I find the official documentation a bit lacking in this area but can't find anything stating against the above. It would be greatly appreciated if someone could confirm before planning the installs.
What I'm aiming for is somewhat similar to the "2 Tier Topology" described at: Example
License Topologies and Costs for SQL Server 2014 Self-Service Business Intelligence
With the difference that there is a separate SQL Server 2014 server used both by SharePoint and as a standalone BI-server.
SharePoint EE + SQL Server 2014 EE
Excel Services
SSRS Add-in (Reporting Services, Power View)
SQL Server DB for SP Content, Configuration and Service Application DB:s
SQL Server 2014 EE - SharePoint + Standalone for BI
SSRS SharePoint Mode
SSRS Native Mode
SSAS (Not in SharePoint mode, skipping PowerPivot for now. Would Power View still work?)
SQL Server DB for Data Warehouse
= 1 x SharePoint EE Server Licence, 2 x SQL Server 2014 EE Server Licenses?
Deployment
Topologies for SQL Server BI Features in SharePoint - Actually gives a good overview in the section "PowerPivot for SharePoint
2013 and Reporting Services Three Server Deployment". Just remove PowerPivot Service from Server 1 and change the Analysis Services in Server 2 to a regular native multidimensional mode. Server 2 would also be used for native Reporting Services.
Fallback or even beneficial option to install SSRS in SharePoint mode on the SQL Server instance used for content and configuration?Hi Daniel Wikar,
As per my understanding, you want to install two SQL Server instances on the same server, and configure one of the Reporting Services to SharePoint integrated mode, another to native mode.
According to my knowledge, multiple instances of Reporting Services on the same computer, where one instance runs in SharePoint integrated mode and the other instance runs in native mode is supported. But we must run all report server instances at the same
level. For example, if we are using SQL Server 2014, all report server instances must be SQL Server 2014.
Besides, Analysis Services and Reporting Services can be installed as standalone servers, in scale-out configurations, or as shared service applications in a SharePoint farm. Installing the services in a farm enables BI features that are only available in
SharePoint, including PowerPivot for SharePoint and Power View.
For more information about Feature Comparison of SharePoint and Native Mode and Supported and Unsupported Configurations, please refer to the following documents:
http://msdn.microsoft.com/en-us/library/ms157231.aspx
http://technet.microsoft.com/en-US/library/bb510781(v=SQL.105).aspx
For detailed information regarding to the license issue, please call
1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here. -
[SOLVED, PARTIALLY] Xorg 1.5 leaves me with freezed and colored screen
I was using xorg-server 1.4 with xf86-video-i810 and xf86-input-keyboard 1.3.1 and it was fine. Today, I upgrade my system and xf86-input-keyboard was upgrade to 1.3.2. With this upgrade, I was able to log into X but my keyboard was unusable. And since I do not have the old package of xf86-input-keyboard (version 1.3.1) in my hard disk, I am unable to go back.
So, I tried to upgrade my system completely including xorg-server 1.4 to 1.5 and xf86-video-i810 to xf86-video-intel. Then I tried starting up X and it gives a colorful screen with vertical lines.
Searched forum a bit and came to know that I can remove my xorg.conf since new xorg detects things on its own. Hence, I deleted xorg.conf and enabled hal in rc.conf. But this also gave me the same result.
Thirdly, I tried removing xbindkeys since there was some mention that it creates problem when starting up with X, but to no avail.
Finally, I tried using "hwd -u" and "hwd -xa" to get an xorg.conf as it was mentioned in some post. it too did not work.
Can someone help me get out of this mess. I'm not able to post links to other posts or my xorg log since I'm on links to browse net and using it first time.
Waiting for your help.[
Last edited by ravisghosh (2009-02-27 00:23:15)After trying lot of things and not being able to get xorg-server 1.5 work with my system, the only way remaining was to build xf86-input-keyboard 1.3.1 using abs. Here is how I did it (will help those who does not know how to build using abs just as I did not know).
copy the following files in a folder.
/var/abs/extra/xf86-input-keyboard/PKGBUILD
/var/abs/extra/xf86-input-keyboard/new-server.patch
open PKGBUILD file using some editor, e.g. nano. and change the following lines to look like this
pkgver=1.3.1
pkgrel=1
Note, the version and release has to be changed.
Now run this command
makepkg
This will download a file and after a while you will get the following error:
validating source files with md5sums
xf86-input-keyboard-1.3.1.tar.gz FAILED
Now run the following command
md5sum -t xf86-input-keyboard-1.3.1.tar.gz
THis will give a long series of letters and numbers. Note that down and again open PKGBUILD file. Go to the end of the file and you will find 2 similar series of numbers and letters. Replace the first series with the number you have noted down. Save the file and exit.
Now again run
makepkg
This time, the process will continue and will not fail. You will get the installation file in the same directory, named like xf86-input-keyboard-1.3.1-1-i686.pkg.tar.gz.
now, install this file
pacman -U xf86-input-keyboard-1.3.1-1-i686.pkg.tar.gz
Do the same for other files, i.e., xorg-server 1.4 and xf86-video-i810-1.7.4, etc., if you happen to not have them in your hard disk. -
[SOLVED] Best Practice for systemd, udisks, udev, polkit,and openbox
I have to admit I am stymied here. I have been in the wiki and forums most of the day and am just not finding the solution here.
I have both udisks and udisks2 installed
I am running a pure systemd
I do not use a login manager
I use startx that has a switch clause based on an environmental variable to pick the environment I want.
For now, let's limit this to xfce4 and openbox.
I used to be able to log in and mount usb and SD volumes using Thunar, Dolphin, and palimpsest. I can no longer do that; I receive an error indicating I've not the proper privileges.
Even more fun, I log into a console and use udiskie, and can mount volumes without issue.
I start X with startx, launch a terminal program, and udiskie will no longer allow me to mount. I can read volumes mounted by udiskie before I started X.
I have tried various combinations of ck-launch-session, dbus-launch in concert with openbox-session and startxfce4. Nothing allows me to automount as a normal user. This used to work, but something has gone south, but I am not clear when.
Anyone have suggestions for a stable solution here?
A couple files as they exist right now:
ewaller@odin:~ 1005 %cat .xinitrc
#xset b off
setxkbmap -option ctrl:nocaps
case $WM in
openbox)
exec ck-launch-session openbox-session
e17)
dbus-launch
enlightenment_start
vb)
VirtualBox -startvm "Windows XP" -fullscreen
xfce4)
exec ck-launch-session startxfce4
exec ck-launch-session startxfce4
esac
ewaller@odin:~ 1006 %cat /etc/polkit-1/localauthority/50-local.d/10-udisks.pkla
[Local Users udisk2]
Identity=unix-group:users
Action=org.freedesktop.udisks2.*
ResultAny=yes
ResultInactive=yes
ResultActive=yes
[Local Users udisk]
Identity=unix-group:users
Action=org.freedesktop.udisks.*
ResultAny=yes
ResultInactive=yes
ResultActive=yes
ewaller@odin:~ 1007 %
ewaller@odin:~[1] 1007 %
Last edited by ewaller (2012-10-16 03:28:49)Are you starting X onto the same vt you logged into i.e. startx -- vt1 for tty1 or startx -- vt$(fgconsole) (or falconindy's xserverrc) for a more general case? If you don't, systemd-logind cannot keep track of the session and the -kit permissions will thus break.
You can see sessions using loginctl:
└$ loginctl
SESSION UID USER SEAT
1 1000 zekesulastin seat0
4 1000 zekesulastin seat0
2 sessions listed.
You can see information about your sessions using loginctl show-session $num - the session must be Active:
└$ loginctl show-session 4
Id=4
Timestamp=Sun, 14 Oct 2012 23:18:56 -0400
TimestampMonotonic=49646619798
DefaultControlGroup=name=systemd:/user/zekesulastin/4
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=12771
Audit=4
Type=tty
Class=user
Active=yes <-- This must be "yes"
State=active
KillProcesses=no
IdleHint=yes
IdleSinceHint=1350271136064237
IdleSinceHintMonotonic=49646611251
Name=zekesulastin
(I personally have a conditional in bash_profile to exec startx -- vt1 if I log in on tty1.)
Last edited by ZekeSulastin (2012-10-15 04:37:59) -
[SOLVED] Bash prompts and bell characters
Hello
This is kinda hard to explain, but I'll give a shot - with a couple of screenshots.
Notice the terminal on the left, and also at the bottom.. whenever I type in a command (or paste from somewhere) that's longer than xx characters, and hit "END" to edit the command, it goes all the way to the start of the line - but visually it's leaving the character behind, so it's impossible to see where you're editing. I suppose it has something to do with my terminal size (even tho "fullscreen" in Xmonad).
Other than that, I can't figure out why it does it, but it's really anoying.
.Xdefaults
http://codepad.org/U2VSyAUR
Thanks for any help.
Last edited by valvet (2010-11-07 18:30:05)linux-ka wrote:That's strange. I am using xmonad and rxvt-unicode-256color too, but there's no problem. I am running the current version of both of 'em. Have you upgraded xmonad/-contrib? or try to build your rxvt version on your own machine.
Also, yes - my xmonad stuff should be up to date.
Name : xmonad-darcs
Version : 20101103-1
URL : http://hackage.haskell.org/package/xmonad
Licenses : custom:BSD3
Groups : None
Provides : None
Depends On : gmp libxinerama ghc haskell-x11>=1.5.0.0 haskell-mtl
Optional Deps : None
Required By : xmonad-contrib-darcs
Conflicts With : xmonad
Replaces : None
Installed Size : 4404.00 K
Packager : Unknown Packager
Architecture : i686
Build Date : Wed 03 Nov 2010 11:13:51 PM CET
Install Date : Wed 03 Nov 2010 11:14:03 PM CET
Install Reason : Explicitly installed
Install Script : Yes
Description : A tiling window manager
Name : xmonad-contrib-darcs
Version : 20101103-1
URL : http://hackage.haskell.org/package/xmonad-contrib
Licenses : custom:BSD3
Groups : None
Provides : None
Depends On : haskell-x11-xft xmonad-darcs
Optional Deps : None
Required By : None
Conflicts With : xmonad-contrib
Replaces : None
Installed Size : 26100.00 K
Packager : Unknown Packager
Architecture : i686
Build Date : Wed 03 Nov 2010 11:16:53 PM CET
Install Date : Wed 03 Nov 2010 11:17:21 PM CET
Install Reason : Explicitly installed
Install Script : Yes
Description : Third party extensions for xmonad
Could you try with my Xdefaults file above, see if you can reproduce it? Also try using the font I am (Droid).
Thanks
Last edited by valvet (2010-11-07 02:04:57) -
[SOLVED] Xorg not starting on non-root user [My First Linux]
Hello, I recently turned back to linux after digging up my old ASUS EEE 900a, which I messed up with partitioning fun after trying to cram Windows XP on it and etc. Anyways, I managed to fix it, and after Ubuntu being too big, I was turned on to Arch as a good distro, and I've been having a very good time setting everything up so far.
Anyways: My issue arises after needing to use a different user in order to use Chrome. I created a new account and tried to run startx like I usually do. It spat out the usual few lines, but failed and gave me this log:
[ 4616.974]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 4616.974] X Protocol Version 11, Revision 0
[ 4616.974] Build Operating System: Linux 3.8.7-1-ARCH i686
[ 4616.974] Current Operating System: Linux archieee 3.9.4-1-ARCH #1 SMP PREEMPT Sun May 26 11:56:48 CEST 2013 i686
[ 4616.975] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 4616.975] Build Date: 17 April 2013 02:43:06PM
[ 4616.975]
[ 4616.975] Current version of pixman: 0.30.0
[ 4616.975] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4616.975] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4616.977] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 4 21:56:02 2013
[ 4616.977] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4616.978] (==) No Layout section. Using the first Screen section.
[ 4616.978] (==) No screen section available. Using defaults.
[ 4616.978] (**) |-->Screen "Default Screen Section" (0)
[ 4616.978] (**) | |-->Monitor "<default monitor>"
[ 4616.978] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4616.978] (==) Automatically adding devices
[ 4616.978] (==) Automatically enabling devices
[ 4616.978] (==) Automatically adding GPU devices
[ 4616.978] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4616.978] Entry deleted from font path.
[ 4616.978] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4616.978] Entry deleted from font path.
[ 4616.978] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4616.978] Entry deleted from font path.
[ 4616.978] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4616.979] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4616.979] Entry deleted from font path.
[ 4616.979] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4616.979] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 4616.979] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4616.979] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4616.979] (II) Loader magic: 0x8258620
[ 4616.979] (II) Module ABI versions:
[ 4616.979] X.Org ANSI C Emulation: 0.4
[ 4616.979] X.Org Video Driver: 14.1
[ 4616.979] X.Org XInput driver : 19.1
[ 4616.979] X.Org Server Extension : 7.0
[ 4616.980] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4616.983] (--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 rev 3, Mem @ 0xf3e00000/524288, 0xd0000000/268435456, 0xf3dc0000/262144, I/O @ 0x0000cc00/8
[ 4616.983] (--) PCI: (0:0:2:1) 8086:27a6:1043:8340 rev 3, Mem @ 0xf3e80000/524288
[ 4616.983] Initializing built-in extension Generic Event Extension
[ 4616.983] Initializing built-in extension SHAPE
[ 4616.984] Initializing built-in extension MIT-SHM
[ 4616.984] Initializing built-in extension XInputExtension
[ 4616.984] Initializing built-in extension XTEST
[ 4616.984] Initializing built-in extension BIG-REQUESTS
[ 4616.984] Initializing built-in extension SYNC
[ 4616.984] Initializing built-in extension XKEYBOARD
[ 4616.984] Initializing built-in extension XC-MISC
[ 4616.985] Initializing built-in extension SECURITY
[ 4616.985] Initializing built-in extension XINERAMA
[ 4616.987] Initializing built-in extension XFIXES
[ 4616.990] Initializing built-in extension RENDER
[ 4616.993] Initializing built-in extension RANDR
[ 4616.995] Initializing built-in extension COMPOSITE
[ 4616.998] Initializing built-in extension DAMAGE
[ 4617.000] Initializing built-in extension MIT-SCREEN-SAVER
[ 4617.003] Initializing built-in extension DOUBLE-BUFFER
[ 4617.005] Initializing built-in extension RECORD
[ 4617.007] Initializing built-in extension DPMS
[ 4617.010] Initializing built-in extension X-Resource
[ 4617.012] Initializing built-in extension XVideo
[ 4617.015] Initializing built-in extension XVideo-MotionCompensation
[ 4617.017] Initializing built-in extension XFree86-VidModeExtension
[ 4617.019] Initializing built-in extension XFree86-DGA
[ 4617.021] Initializing built-in extension XFree86-DRI
[ 4617.023] Initializing built-in extension DRI2
[ 4617.023] (II) LoadModule: "glx"
[ 4617.024] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4617.024] (II) Module glx: vendor="X.Org Foundation"
[ 4617.024] compiled for 1.14.1, module version = 1.0.0
[ 4617.024] ABI class: X.Org Server Extension, version 7.0
[ 4617.024] (==) AIGLX enabled
[ 4617.026] Loading extension GLX
[ 4617.026] (==) Matched intel as autoconfigured driver 0
[ 4617.026] (==) Matched intel as autoconfigured driver 1
[ 4617.026] (==) Matched vesa as autoconfigured driver 2
[ 4617.026] (==) Matched modesetting as autoconfigured driver 3
[ 4617.026] (==) Matched fbdev as autoconfigured driver 4
[ 4617.026] (==) Assigned the driver to the xf86ConfigLayout
[ 4617.026] (II) LoadModule: "intel"
[ 4617.026] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4617.027] (II) Module intel: vendor="X.Org Foundation"
[ 4617.027] compiled for 1.14.1, module version = 2.21.8
[ 4617.027] Module class: X.Org Video Driver
[ 4617.027] ABI class: X.Org Video Driver, version 14.1
[ 4617.027] (II) LoadModule: "vesa"
[ 4617.027] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4617.028] (II) Module vesa: vendor="X.Org Foundation"
[ 4617.028] compiled for 1.14.0, module version = 2.3.2
[ 4617.028] Module class: X.Org Video Driver
[ 4617.028] ABI class: X.Org Video Driver, version 14.1
[ 4617.028] (II) LoadModule: "modesetting"
[ 4617.029] (WW) Warning, couldn't open module modesetting
[ 4617.029] (II) UnloadModule: "modesetting"
[ 4617.029] (II) Unloading modesetting
[ 4617.029] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4617.029] (II) LoadModule: "fbdev"
[ 4617.029] (WW) Warning, couldn't open module fbdev
[ 4617.029] (II) UnloadModule: "fbdev"
[ 4617.030] (II) Unloading fbdev
[ 4617.030] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4617.030] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT3), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT3), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
Haswell (GT1), Haswell (GT2), Haswell (GT3),
Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2),
Haswell SDV Desktop (GT3), Haswell SDV Mobile (GT1),
Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT3),
Haswell SDV Server (GT1), Haswell SDV Server (GT2),
Haswell SDV Server (GT3), Haswell SDV (GT1), Haswell SDV (GT2),
Haswell SDV (GT3), Haswell SDV (GT1), Haswell SDV (GT2),
Haswell SDV (GT3), Haswell ULT Desktop (GT1),
Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT3),
Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2),
Haswell ULT Mobile (GT3), Haswell ULT Server (GT1),
Haswell ULT Server (GT2), Haswell ULT Server (GT3),
Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3),
Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3),
Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2),
Haswell CRW Desktop (GT3), Haswell CRW Mobile (GT1),
Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT3),
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Haswell CRW Server (GT3), Haswell CRW (GT1), Haswell CRW (GT2),
Haswell CRW (GT3), Haswell CRW (GT1), Haswell CRW (GT2),
Haswell CRW (GT3), ValleyView PO board
[ 4617.032] (II) VESA: driver for VESA chipsets: vesa
[ 4617.032] (++) using VT number 1
[ 4617.033] (WW) Falling back to old probe method for vesa
[ 4617.033] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4617.034] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4617.034] (==) intel(0): RGB weight 888
[ 4617.034] (==) intel(0): Default visual is TrueColor
[ 4617.034] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 4617.034] (**) intel(0): Relaxed fencing disabled
[ 4617.034] (**) intel(0): Wait on SwapBuffers? enabled
[ 4617.034] (**) intel(0): Triple buffering? enabled
[ 4617.034] (**) intel(0): Framebuffer tiled
[ 4617.034] (**) intel(0): Pixmaps tiled
[ 4617.034] (**) intel(0): 3D buffers tiled
[ 4617.034] (**) intel(0): SwapBuffers wait enabled
[ 4617.034] (==) intel(0): video overlay key set to 0x101fe
[ 4617.034] (II) intel(0): Output LVDS1 has no monitor section
[ 4617.035] (--) intel(0): found backlight control interface /sys/class/backlight/eeepc
[ 4617.066] (II) intel(0): Output VGA1 has no monitor section
[ 4617.067] (II) intel(0): EDID for output LVDS1
[ 4617.067] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4617.067] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4617.067] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Printing probed modes for output LVDS1
[ 4617.068] (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz P)
[ 4617.068] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4617.068] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4617.068] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4617.100] (II) intel(0): EDID for output VGA1
[ 4617.100] (II) intel(0): Output LVDS1 connected
[ 4617.100] (II) intel(0): Output VGA1 disconnected
[ 4617.100] (II) intel(0): Using exact sizes for initial modes
[ 4617.100] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 4617.100] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4617.100] (II) intel(0): Kernel page flipping support detected, enabling
[ 4617.100] (==) intel(0): DPI set to (96, 96)
[ 4617.100] (II) Loading sub module "fb"
[ 4617.100] (II) LoadModule: "fb"
[ 4617.101] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4617.102] (II) Module fb: vendor="X.Org Foundation"
[ 4617.103] compiled for 1.14.1, module version = 1.0.0
[ 4617.103] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4617.103] (II) Loading sub module "dri2"
[ 4617.103] (II) LoadModule: "dri2"
[ 4617.103] (II) Module "dri2" already built-in
[ 4617.103] (II) UnloadModule: "vesa"
[ 4617.103] (II) Unloading vesa
[ 4617.103] (==) Depth 24 pixmap format is 32 bpp
[ 4617.104] (II) intel(0): [DRI2] Setup complete
[ 4617.104] (II) intel(0): [DRI2] DRI driver: i915
[ 4617.104] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 4617.104] (II) UXA(0): Driver registered support for the following operations:
[ 4617.104] (II) solid
[ 4617.104] (II) copy
[ 4617.104] (II) composite (RENDER acceleration)
[ 4617.104] (II) put_image
[ 4617.105] (II) get_image
[ 4617.105] (==) intel(0): Backing store disabled
[ 4617.105] (==) intel(0): Silken mouse enabled
[ 4617.105] (II) intel(0): Initializing HW Cursor
[ 4617.105] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4617.113] (==) intel(0): DPMS enabled
[ 4617.113] (==) intel(0): Intel XvMC decoder disabled
[ 4617.113] (II) intel(0): Set up textured video
[ 4617.113] (II) intel(0): Set up overlay video
[ 4617.113] (II) intel(0): direct rendering: DRI2 Enabled
[ 4617.113] (==) intel(0): hotplug detection: "enabled"
[ 4617.123] (--) RandR disabled
[ 4617.160] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4617.160] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4617.160] (II) AIGLX: enabled GLX_ARB_create_context
[ 4617.160] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4617.160] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4617.160] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4617.160] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4617.160] (II) AIGLX: Loaded and initialized i915
[ 4617.160] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4617.162] (II) intel(0): Setting screen physical size to 270 x 158
[ 4617.278] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4617.278] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4617.278] (II) LoadModule: "evdev"
[ 4617.278] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4617.279] (II) Module evdev: vendor="X.Org Foundation"
[ 4617.279] compiled for 1.14.0, module version = 2.8.0
[ 4617.279] Module class: X.Org XInput Driver
[ 4617.279] ABI class: X.Org XInput driver, version 19.1
[ 4617.279] (II) Using input driver 'evdev' for 'Power Button'
[ 4617.279] (**) Power Button: always reports core events
[ 4617.279] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4617.279] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4617.279] (--) evdev: Power Button: Found keys
[ 4617.279] (II) evdev: Power Button: Configuring as keyboard
[ 4617.279] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4617.279] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4617.279] (**) Option "xkb_rules" "evdev"
[ 4617.280] (**) Option "xkb_model" "evdev"
[ 4617.280] (**) Option "xkb_layout" "us"
[ 4617.363] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 4617.363] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4617.363] (II) Using input driver 'evdev' for 'Video Bus'
[ 4617.363] (**) Video Bus: always reports core events
[ 4617.363] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 4617.363] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4617.364] (--) evdev: Video Bus: Found keys
[ 4617.364] (II) evdev: Video Bus: Configuring as keyboard
[ 4617.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[ 4617.364] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4617.364] (**) Option "xkb_rules" "evdev"
[ 4617.364] (**) Option "xkb_model" "evdev"
[ 4617.364] (**) Option "xkb_layout" "us"
[ 4617.365] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4617.365] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4617.365] (II) Using input driver 'evdev' for 'Power Button'
[ 4617.366] (**) Power Button: always reports core events
[ 4617.366] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4617.366] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4617.366] (--) evdev: Power Button: Found keys
[ 4617.366] (II) evdev: Power Button: Configuring as keyboard
[ 4617.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 4617.366] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4617.366] (**) Option "xkb_rules" "evdev"
[ 4617.366] (**) Option "xkb_model" "evdev"
[ 4617.366] (**) Option "xkb_layout" "us"
[ 4617.368] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4617.368] (II) No input driver specified, ignoring this device.
[ 4617.368] (II) This device may have been added with another device file.
[ 4617.369] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4617.369] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4617.369] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4617.369] (**) Sleep Button: always reports core events
[ 4617.369] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 4617.369] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4617.369] (--) evdev: Sleep Button: Found keys
[ 4617.369] (II) evdev: Sleep Button: Configuring as keyboard
[ 4617.369] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 4617.369] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 4617.369] (**) Option "xkb_rules" "evdev"
[ 4617.369] (**) Option "xkb_model" "evdev"
[ 4617.369] (**) Option "xkb_layout" "us"
[ 4617.370] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4617.371] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 4617.372] (II) No input driver specified, ignoring this device.
[ 4617.372] (II) This device may have been added with another device file.
[ 4617.372] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 4617.372] (II) No input driver specified, ignoring this device.
[ 4617.372] (II) This device may have been added with another device file.
[ 4617.373] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event5)
[ 4617.373] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
[ 4617.373] (II) Using input driver 'evdev' for 'Asus EeePC extra buttons'
[ 4617.373] (**) Asus EeePC extra buttons: always reports core events
[ 4617.373] (**) evdev: Asus EeePC extra buttons: Device: "/dev/input/event5"
[ 4617.374] (--) evdev: Asus EeePC extra buttons: Vendor 0 Product 0
[ 4617.374] (--) evdev: Asus EeePC extra buttons: Found keys
[ 4617.374] (II) evdev: Asus EeePC extra buttons: Configuring as keyboard
[ 4617.374] (**) Option "config_info" "udev:/sys/devices/platform/eeepc/input/input5/event5"
[ 4617.374] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD, id 10)
[ 4617.374] (**) Option "xkb_rules" "evdev"
[ 4617.374] (**) Option "xkb_model" "evdev"
[ 4617.374] (**) Option "xkb_layout" "us"
[ 4617.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4617.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4617.376] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4617.376] (**) AT Translated Set 2 keyboard: always reports core events
[ 4617.376] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4617.376] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4617.376] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4617.376] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4617.376] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4617.376] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 4617.376] (**) Option "xkb_rules" "evdev"
[ 4617.376] (**) Option "xkb_model" "evdev"
[ 4617.376] (**) Option "xkb_layout" "us"
[ 4617.378] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 4617.378] (II) LoadModule: "synaptics"
[ 4617.378] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4617.379] (II) Module synaptics: vendor="X.Org Foundation"
[ 4617.379] compiled for 1.14.1, module version = 1.7.1
[ 4617.379] Module class: X.Org XInput Driver
[ 4617.379] ABI class: X.Org XInput driver, version 19.1
[ 4617.379] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 4617.379] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4617.379] (**) Option "Device" "/dev/input/event10"
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 32 - 544 (res 0)
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 32 - 352 (res 0)
[ 4617.380] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
[ 4617.380] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report finger width.
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: invalid pressure range. defaulting to 0 - 255
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: invalid finger width range. defaulting to 0 - 15
[ 4617.380] (**) Option "TapButton1" "1"
[ 4617.380] (**) Option "TapButton2" "2"
[ 4617.380] (**) Option "TapButton3" "3"
[ 4617.381] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 4617.381] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4617.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 4617.383] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.332
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 4617.384] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 4617.385] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 4617.385] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4617.386] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 4617.386] (II) No input driver specified, ignoring this device.
[ 4617.386] (II) This device may have been added with another device file.
I've tried looking for this problem elsewhere as it feels like such a newbie problem to have, but I have had difficulty. There are two errors in this log, I think, but they didn't mean much to me... Any help for a linux newbie? Thanks!
EDIT: Solved; as pointed out below, I needed a window manager for a non-root user to use.
Last edited by DJMankiewicz (2013-06-05 07:30:06)Well, soon you'll have to try out one of the more minimal options, in which you don't use any desktop environment but instead you install your own window manager (openbox, dwm, i3, etc) and use small, dedicated programs. Given your extreme space restrictions, I recommend going that route! But, take your time because that requires a bit of learning: you need to figure out which parts of a desktop environment you really need, then you need to learn the proper names for them so that you can search for information, then you need to start fiddling with configurations, etc. Better first to make sure your first Arch Linux installation is up and running properly and to learn a bit about the system before entering that downward spiral.
-
About garbled and broken characters when EXEC SQL
Hi All,
We set up conncetion by DBCON to an external Oracle database,and select data from it in ABAP in Native SQL,but the external database table contain chinese characters ,and we got garbled and broken characters in ABAP program.Is there any way to solve this problem?
The database of SAP R/3 is Oracel too.And for some reason,change the database character set is not suitable for us.
Thanks very much.
PoleHi,
have you tried to translate it with abap command translate ? -> look f1
Andreas -
Where do I find an excellent and reliable Vietnamese keyboard for new iPad? A keyboard that displays all the characters and the accent marks so typing can be easily accomplished. The iPad keyboard selection for Vietnamese really only seems to change the Return key to the Vietnamese language. iPad is sold all over the world....my interest is Viet Nam.....the full keyboard.
Thanks.....my Vietnamese expert spouse says this tip will work just fine. I was not aware of the hold down function. Slow typing but accomplishes the objective native on the iPad.
You are correct.....most Apps that I find seem to be based only on a copy/paste method of input.
You solved the problem. -
[Solved]Xorg Error using xinit
I am facing some troubles when i try to start X in my notebook, the screen goes all crazy and i need to restart the computer. My system is up to date, installed Xorg, xorg-xinit and xorg-xterm as i always do, but nothing works, and i dont know how i can run X as a "failsafe" version like VGA, if this is even possible.
What should i do? How do i get my video card specs to post here?
Thx in advance and sorry for my bad english =P
Edit:
I just had to install nvidia package at extra repository! Thx Guys!
Last edited by Guilherme David (2011-12-06 09:33:29)Thank u pretty much scar, i installed the nvidia driver in Extra repository and configured xinit and openbox, it worked as charm. Srry for such a simple question =P
The log files were empty cuz for some reason xinit was empty since my last try o.O all working now!
Edit: how can i mark this as solved?
Last edited by Guilherme David (2011-12-05 16:22:38) -
[SOLVED] Xorg doesn't start after upgrade to 1.17.1
Archlinux i686
Intel Core 2 Duo 6600
01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
After following upgrades:
[2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
[2015-02-26 03:27] [ALPM] transaction started
[2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
[2015-02-26 03:28] [ALPM] transaction completed
[2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
[2015-02-26 03:29] [ALPM] transaction started
[2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
[2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
[2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
[2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
[2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
Xorg doesn't start after reboot and I found following kernel message:
kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
and /var/log/Xorg.0.log looks like this:
[ 5.591]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 5.591] X Protocol Version 11, Revision 0
[ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
[ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
[ 5.591] Build Date: 22 February 2015 12:52:47PM
[ 5.591]
[ 5.592] Current version of pixman: 0.32.6
[ 5.592] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
[ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.598] (==) ServerLayout "ServerLayout0"
[ 5.598] (==) No screen section available. Using defaults.
[ 5.598] (**) |-->Screen "Default Screen Section" (0)
[ 5.598] (**) | |-->Monitor "<default monitor>"
[ 5.599] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 5.599] (**) | |-->Device "Device0"
[ 5.599] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.599] (**) Option "BlankTime" "0"
[ 5.599] (**) Option "StandbyTime" "0"
[ 5.599] (**) Option "SuspendTime" "0"
[ 5.599] (**) Option "OffTime" "0"
[ 5.599] (==) Automatically adding devices
[ 5.599] (==) Automatically enabling devices
[ 5.599] (==) Automatically adding GPU devices
[ 5.608] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.608] (**) Extension "Composite" is disabled
[ 5.608] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.608] (II) Loader magic: 0x829e700
[ 5.608] (II) Module ABI versions:
[ 5.608] X.Org ANSI C Emulation: 0.4
[ 5.608] X.Org Video Driver: 19.0
[ 5.608] X.Org XInput driver : 21.0
[ 5.608] X.Org Server Extension : 9.0
[ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
[ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5.613] (II) LoadModule: "glx"
[ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.632] (II) Module glx: vendor="X.Org Foundation"
[ 5.632] compiled for 1.17.1, module version = 1.0.0
[ 5.632] ABI class: X.Org Server Extension, version 9.0
[ 5.632] (==) AIGLX enabled
[ 5.632] (==) Matched nouveau as autoconfigured driver 0
[ 5.632] (==) Matched nv as autoconfigured driver 1
[ 5.632] (==) Matched nouveau as autoconfigured driver 2
[ 5.632] (==) Matched nv as autoconfigured driver 3
[ 5.632] (==) Matched modesetting as autoconfigured driver 4
[ 5.632] (==) Matched fbdev as autoconfigured driver 5
[ 5.632] (==) Matched vesa as autoconfigured driver 6
[ 5.632] (==) Assigned the driver to the xf86ConfigLayout
[ 5.632] (II) LoadModule: "nouveau"
[ 5.632] (WW) Warning, couldn't open module nouveau
[ 5.632] (II) UnloadModule: "nouveau"
[ 5.632] (II) Unloading nouveau
[ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5.633] (II) LoadModule: "nv"
[ 5.633] (WW) Warning, couldn't open module nv
[ 5.633] (II) UnloadModule: "nv"
[ 5.633] (II) Unloading nv
[ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5.633] (II) LoadModule: "modesetting"
[ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.634] compiled for 1.17.1, module version = 1.17.1
[ 5.634] Module class: X.Org Video Driver
[ 5.634] ABI class: X.Org Video Driver, version 19.0
[ 5.634] (II) LoadModule: "fbdev"
[ 5.634] (WW) Warning, couldn't open module fbdev
[ 5.634] (II) UnloadModule: "fbdev"
[ 5.634] (II) Unloading fbdev
[ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.634] (II) LoadModule: "vesa"
[ 5.634] (WW) Warning, couldn't open module vesa
[ 5.634] (II) UnloadModule: "vesa"
[ 5.634] (II) Unloading vesa
[ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.634] (++) using VT number 7
[ 5.635] (II) modeset(0): using drv /dev/dri/card0
[ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5.636] (==) modeset(0): RGB weight 888
[ 5.636] (==) modeset(0): Default visual is TrueColor
[ 5.636] (II) Loading sub module "glamoregl"
[ 5.636] (II) LoadModule: "glamoregl"
[ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.647] compiled for 1.17.1, module version = 1.0.0
[ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
[ 5.772] (II) glamor: EGL version 1.4 (DRI2):
[ 5.786] (II) modeset(0): glamor initialized
[ 5.786] (II) Loading sub module "dri2"
[ 5.786] (II) LoadModule: "dri2"
[ 5.786] (II) Module "dri2" already built-in
[ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
[ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
[ 5.950] (II) modeset(0): Output TV-0 has no monitor section
[ 6.006] (II) modeset(0): EDID for output DVI-0
[ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
[ 6.006] (II) modeset(0): Year: 2011 Week: 8
[ 6.006] (II) modeset(0): EDID Version: 1.3
[ 6.006] (II) modeset(0): Digital Display Input
[ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 6.006] (II) modeset(0): Gamma: 2.20
[ 6.006] (II) modeset(0): DPMS capabilities: Off
[ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 6.006] (II) modeset(0): First detailed timing is preferred mode
[ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 6.006] (II) modeset(0): Supported established timings:
[ 6.006] (II) modeset(0): 720x400@70Hz
[ 6.006] (II) modeset(0): 640x480@60Hz
[ 6.006] (II) modeset(0): 640x480@67Hz
[ 6.006] (II) modeset(0): 640x480@72Hz
[ 6.006] (II) modeset(0): 640x480@75Hz
[ 6.006] (II) modeset(0): 800x600@56Hz
[ 6.006] (II) modeset(0): 800x600@60Hz
[ 6.006] (II) modeset(0): 800x600@72Hz
[ 6.006] (II) modeset(0): 800x600@75Hz
[ 6.006] (II) modeset(0): 832x624@75Hz
[ 6.006] (II) modeset(0): 1024x768@60Hz
[ 6.006] (II) modeset(0): 1024x768@70Hz
[ 6.006] (II) modeset(0): 1024x768@75Hz
[ 6.006] (II) modeset(0): 1280x1024@75Hz
[ 6.006] (II) modeset(0): 1152x864@75Hz
[ 6.006] (II) modeset(0): Manufacturer's mask: 0
[ 6.006] (II) modeset(0): Supported standard timings:
[ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
[ 6.007] (II) modeset(0): Monitor name: SMBX2331
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
[ 6.007] (II) modeset(0): EDID (in hex):
[ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
[ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
[ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
[ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
[ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
[ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
[ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
[ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
[ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
[ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
[ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
[ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
[ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
[ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
[ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
[ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
[ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 6.063] (II) modeset(0): EDID for output DVI-1
[ 6.116] (II) modeset(0): EDID for output TV-0
[ 6.116] (II) modeset(0): Output DVI-0 connected
[ 6.116] (II) modeset(0): Output DVI-1 disconnected
[ 6.116] (II) modeset(0): Output TV-0 disconnected
[ 6.116] (II) modeset(0): Using exact sizes for initial modes
[ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
[ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.116] (==) modeset(0): DPI set to (96, 96)
[ 6.116] (II) Loading sub module "fb"
[ 6.116] (II) LoadModule: "fb"
[ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.118] (II) Module fb: vendor="X.Org Foundation"
[ 6.118] compiled for 1.17.1, module version = 1.0.0
[ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.118] (==) Depth 24 pixmap format is 32 bpp
[ 6.462] (==) modeset(0): Backing store disabled
[ 6.462] (==) modeset(0): Silken mouse enabled
[ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.535] (==) modeset(0): DPMS enabled
[ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
[ 6.535] (II) modeset(0): [DRI2] Setup complete
[ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
[ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
[ 6.535] (--) RandR disabled
[ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.552] (II) AIGLX: Loaded and initialized nouveau
[ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
[ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.741] (II) LoadModule: "evdev"
[ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.744] (II) Module evdev: vendor="X.Org Foundation"
[ 6.744] compiled for 1.16.2, module version = 2.9.1
[ 6.744] Module class: X.Org XInput Driver
[ 6.744] ABI class: X.Org XInput driver, version 21.0
[ 6.744] (II) Using input driver 'evdev' for 'Power Button'
[ 6.744] (**) Power Button: always reports core events
[ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.744] (--) evdev: Power Button: Found keys
[ 6.744] (II) evdev: Power Button: Configuring as keyboard
[ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.744] (**) Option "xkb_rules" "evdev"
[ 6.744] (**) Option "xkb_model" "pc104"
[ 6.744] (**) Option "xkb_layout" "us"
[ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.780] (II) Using input driver 'evdev' for 'Power Button'
[ 6.780] (**) Power Button: always reports core events
[ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.780] (--) evdev: Power Button: Found keys
[ 6.780] (II) evdev: Power Button: Configuring as keyboard
[ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.780] (**) Option "xkb_rules" "evdev"
[ 6.780] (**) Option "xkb_model" "pc104"
[ 6.780] (**) Option "xkb_layout" "us"
[ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 6.781] (II) No input driver specified, ignoring this device.
[ 6.781] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
[ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 6.785] (II) No input driver specified, ignoring this device.
[ 6.785] (II) This device may have been added with another device file.
[ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 6.785] (**) Option "xkb_rules" "evdev"
[ 6.785] (**) Option "xkb_model" "pc104"
[ 6.785] (**) Option "xkb_layout" "us"
[ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.803] (EE)
[ 6.803] (EE) Backtrace:
[ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
[ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
[ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
[ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
[ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
[ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
[ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
[ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
[ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
[ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
[ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
[ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
[ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
[ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
[ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
[ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
[ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
[ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
[ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
[ 6.814] (EE)
[ 6.814] (EE) Segmentation fault at address 0x0
[ 6.814] (EE)
Fatal server error:
[ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 6.814] (EE)
[ 6.814] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6.814] (EE)
[ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 6.817] (EE) Server terminated with error (1). Closing log file.
Note the segfault in modesetting_drv.so!
Any help?
I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
Is it possible that any old config files can cause this?
EDIT:
I tried kernel parameter "nouveau.modeset=0" but it didn't help.
Last edited by cro (2015-02-26 16:33:19)Ok, I guess I solved it by reinstalling xf86-video-nouveau.
Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
And why does that lead to mysterious error messages and segfault??
I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1. -
Hi,
I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
<Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
"The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
error logging. So we created another project in Visual Studio called:
<Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
And this is when the error has come back and bitten me! The scenario is now as follows:
1. project1 packages and deploys successfully with long feature names and deep paths.
2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
1. By doing the following I can get project2 to package
In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
Clean the solution
Shut down Visual Studio 2010
Open Visual Studio 2010
Rebuild the solution
Package the project2
et voila the package is generated!
This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
no longer be hanging onto something.
Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
solutions on a Build Server using automated builds.
2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
5. DebugView shows nothing useful during the build and packaging of the project.
6. The error seems to occur in
CreateSharePointProjectService target called at line 365 of
Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
project2 completely and recreate it and introduce it into my Visual Studio solution.
Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
project etc... and is actually workable in a meaningful Visual Studio solution.Hi
Yes, I thought I had fixed this my moving my solution from the usual documents to
c:\v2010\projectsOverflow\DetailedProjectTimeline
This builds ok, but when I come to package I get the lovely error:
Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
Now, the error seems to be related to
Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
<metaData>
<type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">VisualProjectTimelineWebPart</property>
<property name="Description" type="string">My Visual WebPart</property>
</properties>
</data>
</webPart>
</webParts>
.... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
Daniel -
I just re-installed Arch, because in the process of removing the Debian install last night, GParted screwed up with my drive numbers which started giving me different GRUB errors every time I tried to boot.
Good thing I had a backup for my home drive.
1)So after installation, I tried using the xorg.conf that I had backed up, but if I do this my openbox session starts up but I cannot use my mouse or my keyboard. This is probably because of hal messing it up. I checked if hal was installed and running and I have even added it to my DAEMONS array. I also have the xf86-input-evdev and xf86-input-synaptics installed. Still no love !
If i try to manually start hal in the terminal, it always FAILS.
2) Also I am currently using the vesa drivers and if I use a xorg.conf generated by nvidia-xconfig, I simply cannot get X to start. I get errors (I will post the errors after changing over to that xorg.conf file and pasting the relevant section from /var/log/Xorg.0.log) This is my current xorg(generated by hwd -xa)
[Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
# Load "type1"
Load "freetype"
# Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "vesa"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
This is the xorg.conf that used to work well on the same machine previously
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Jan 22 19:53:46 PST 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "glx"
#Load "record"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 100.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV11 [GeForce2 Go]"
Option "RenderAccel" "true"
Option "NoLogo" " true"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
3) For some reason it hasn't set my locales properly during this install. I keep getting this error when I start a GTK app from the terminal
inxs ~ > sudo leafpad /etc/X11/xorg.conf
Password:
(process:6037): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
inxs ~ >
If you need to see any other files..let me know and I will post back.
Last edited by Inxsible (2009-02-08 00:50:16)Thanks skottish. All previously mentioned issues resolved. Now for a new one
I have installed a GTK theme from box-look.org and every time i start a GTK app I get these errors:
inxs ~ > aliases
(leafpad:4731): Gtk-WARNING **: Unable to locate theme engine in module_path: "xfce",
(leafpad:4731): Gtk-WARNING **: Unable to locate theme engine in module_path: "xfce",
(leafpad:4731): Gtk-WARNING **: Unable to locate theme engine in module_path: "xfce",
(leafpad:4731): Gtk-WARNING **: Unable to locate theme engine in module_path: "xfce",
(leafpad:4731): Gtk-WARNING **: Unable to locate theme engine in module_path: "xfce",
This is because the gtkrc file for that theme uses the xfce engine. Here's the gtk theme file
gtk-icon-sizes = "panel-menu=16,16:panel=16,16:gtk-button=16,16:gtk-large-toolbar=16,16"
gtk-button-images = 0
gtk-menu-images = 0
style "default"
GtkButton::default_border = {0, 0, 0, 0}
GtkButton::default_outside_border = {0, 0, 0, 0}
GtkButton::child_displacement_x = 0
GtkButton::child_displacement_y = 1
GtkButton::default_spacing = 2
GtkButton::focus-padding = 0
GtkCheckButton::indicator_size = 8
GtkMenuBar::internal-padding = 1
GtkMenuBar::shadow_type = none
GtkHandleBox::shadow_type = none
GtkMenuItem::selected_shadow_type = none
GtkPaned::handle_full_size = 1
GtkPaned::handle_size = 2
GtkRadioButton::indicator_size = 10
GtkRange::slider_width = 10
GtkRange::stepper_size = 10
GtkRange::stepper_spacing = 0
GtkRange::trough_border = 0
GtkScrollbar::has_forward_stepper = 0
GtkScrollbar::has_backward_stepper = 0
GtkScrollbar::has_secondary_backward_stepper = 0
GtkScrollbar::min_slider_length = 10
GtkToolbar::shadow_type = none
GtkWidget::focus-line-width = 1
GtkWidget::focus_padding = 1
GtkWidget::interior_focus = 1
GtkWidget::internal_padding = 1
GtkEntry::cursor_aspect_ratio = 0.1
GtkEntry::cursor_color = "#989898"
GtkEntry::secondary_cursor_color = "#989898"
GtkTextView::cursor_color = "#0090B4"
GtkTextView::secondary_cursor_color = "#989898"
xthickness = 1
ythickness = 1
base[NORMAL] = "#202020" # Background, most
base[PRELIGHT] = "#202020" # Mouseover menu
base[ACTIVE] = "#181818" # Menu active item in inactive window
base[SELECTED] = "#3D3D3D" # Menu active item in active window
base[INSENSITIVE] = "#282828" # Background, insensitive
text[NORMAL] = "#989898" # Text in window
text[PRELIGHT] = "#0090B4" # Text on Mouseover
text[ACTIVE] = "#989898" # Active text in inactive window
text[SELECTED] = "#0090B4" # Active text in active window
text[INSENSITIVE] = "#989898" # Unknown
bg[NORMAL] = "#202020" # Normal Background, inactive Metacity bar, buttons
bg[PRELIGHT] = "#343434" # Mouseover buttons
bg[ACTIVE] = "#343434" # Mouseclicking, Tabs, active window list
bg[SELECTED] = "#343434" # Metacity Bar
bg[INSENSITIVE] = "#202020" # Insensitive buttons
fg[ACTIVE] = "#989898"
fg[INSENSITIVE] = "#989898"
fg[NORMAL] = "#989898"
fg[PRELIGHT] = "#0090B4"
fg[SELECTED] = "#989898"
engine "xfce"
smooth_edge = true
boxfill
fill_style = plain
widget_class "*" style "default"
style "menustyle" = "default"
xthickness = 2
ythickness = 0
engine "xfce"
smooth_edge = true
grip_style = none
boxfill
fill_style = gradient
orientation = vertical
shade_start = 1.02
shade_end = 1.00
widget_class "*BonoboDockItem" style "menustyle"
class "*BonoboDockItem" style "menustyle"
widget_class "*ToolBar" style "menustyle"
class "*ToolBar" style "menustyle"
widget_class "*MenuBar" style "menustyle"
class "*MenuBar" style "menustyle"
class "GtkWidget" style "default"
style "inactivetext"
widget_class "*.<GtkLabel>" style "inactivetext"
widget_class "*.<GtkCellLayout>" style "inactivetext"
#widget_class "*.<Combo>" style "inactivetext"
style "inactivetext2"
fg[PRELIGHT] = "#B3B600"
text[PRELIGHT] = "#B3B600"
widget_class "*.<GtkMenuItem>.*" style "inactivetext2"
style "button" = "default"
xthickness = 2
ythickness = 2
engine "xfce"
smooth_edge = true
grip_style = none
boxfill
fill_style = gradient
orientation = vertical
shade_start = 1.05
shade_end = 1.00
widget_class "*Button*" style "button"
class "*Button*" style "button"
widget_class "*button*" style "button"
class "*button*" style "button"
widget_class "*OptionMenu*" style "button"
class "*OptionMenu*" style "button"
style "sbstyle" = "default"
fg[PRELIGHT] = "#989898"
bg[NORMAL] = "#202020"
bg[PRELIGHT] = "#0090B4"
xthickness = 4
ythickness = 4
engine "xfce"
smooth_edge = true
grip_style = none
boxfill
fill_style = gradient
orientation = automatic
shade_start = 1.0
shade_end = 1.0
widget_class "*Scrollbar*" style "sbstyle"
class "*Scrollbar*" style "sbstyle"
widget_class "*GtkScale*" style "sbstyle"
class "*GtkScale*" style "sbstyle"
widget_class "*GtkProgress*" style "sbstyle"
class "*GtkProgress*" style "sbstyle"
style "fsstyle"
# fg[NORMAL] = "#CABDA9"
fg[ACTIVE] = "#989898"
fg[SELECTED] = "#989898"
widget_class "*List" style "fsstyle"
class "*List" style "fsstyle"
widget_class "*Button" style "fsstyle"
class "*Button" style "fsstyle"
widget_class "*Tree" style "fsstyle"
class "*Tree" style "fsstyle"
style "ledstyle"
text[NORMAL] = "#CABDA9"
widget_class "*Clock*" style "ledstyle"
class "*Clock*" style "ledstyle"
style "menuitem" = "default"
xthickness = 1
ythickness = 2
widget_class "*MenuItem*" style "menuitem"
class "*MenuItem*" style "menuitem"
style "flat" = "default"
xthickness = 2
ythickness = 2
engine "xfce"
smooth_edge = true
grip_style = none
boxfill
fill_style = gradient
orientation = vertical
shade_start = 1.00
shade_end = 1.00
widget_class "*HandleBox*" style "flat"
style "titlebar"
bg[SELECTED] = "#D0CCC5"
fg[SELECTED] = "#989898"
fg[INSENSITIVE] = "#989898"
widget "xfwm" style "titlebar"
widget_class "MetaFrames" style "titlebar"
class "MetaFrames" style "titlebar"
Is there any way to get rid of the errors without installing a bunch of Xfce theme icons/engines. Can I use a different engine for the theme?
Last edited by Inxsible (2009-02-07 23:19:16) -
Issues with danish characters and sync
I am using a Nokia 5800, Nokia Ovi Suite 1.1 and synchronize through a cable from phone to PC.
I am using the Address Book from Outlook Express to synchonize between my Nokia phone and my PC. However, any special danish characters (æ, ø and å) are not correctly transferred from the phone to the PC, though the other way round does not cause any problems.
This is an issue when I set it up to synchronize both ways, as everytime I do this, all people in my Phone with either æ, ø or å in their name come in to my Outlook list as duplicates where the above-mentioned letters are replaced by some rubbish.
I assumed this was some language-settings but everywhere I can see my PC is set for danish and so is my phone.
What can I do to prevent this problem? Is there anywhere specific I have to change / modify some setting?Hi richard116,
The BlackBerry Desktop Software requires a one time connection to the internet when configuring synchronization. Its possible this could be being blocked due to a firewall or anti-virus software. The following article should help you diagnose the cause and then resolve the issue so you can setup synchronization. http://bbry.lv/mfgghx
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!
Maybe you are looking for
-
SPML Client call fails in SAP AS Java
Hi, I configured Identity service in SAP VDS 7.1 and deployed the ear file into SAP Netweaver AS Java. When I tried to access the Identity service from AS Java I m getting following error, com.sap.tc.webdynpro.services.exceptions.WDRuntimeException:
-
Is it possible to link songs in itunes?
I'd like to be able to link certain songs together, as often heard on the radio for tunes like Train, Train, by Blackfoot; or Queen's Bohemian Rhapsody and We Are the Champions.
-
Setting Content-Type in .jspx file
Hello, My application is not rendered by an HTML Browser. I need to set the contentType to application/x-ywidget+xml in my JSPX file. The content type returned is always text/xml !!! I have tried: 1. To create a phaseListener and overloading before o
-
Bridge CS6 (64bit) becomes unresponsive
Bridge CS6 becomes untresponsive for general operation keys. Lasts for a minute. CS5 is OK. Waht do I do?
-
Hello! Help, i need somebody... I'm new in C++, VC and Oracle. I use OCCI to connect on 10g db. Somehow i configured VC so now i can create .exe. I'm not sure that i can repeat configuration:). In databes there is table whit only varchar2 fields. The