Some Condition types missing during extraction from 2LIS_11_VAKON

Hi,
I am extracting conditions data to BI from ECC through 2LIS_11_VAKON. This datasource uses the fields from table KOMV. The Field KSCHL (Condition type) is also being taken from KOMV structure.
My problem is some condition types are missing during extraction. Say, for example, for a Document condition i have 22 Condition types in KONV table but when i extract the data to BI, nearly 7 conditions are missing, i am getting only 15 condition types for the same document condition in BI.
Why is this happening? I dont have any filters set. Moreover, this is happening in the Datasource level itself.
Please advice. Any help on this is highly appreciated.
Regards,
Murali

Hi Murali,
try to have the manual check with set of data..there must be some mistaken in And and OR logic.
Thanks,
Deepak

Similar Messages

In import Pricing Proceedure, Some Condition types added to Material Cost

HI,
In Import Pricing procedure, Some condition types (Like Basic Customs Duty,Edu Cess & Hier Edu Cess) are added to material cost. The remaining are not added. What is the configuration to add condition types to Material cost?
Note - we have added FR3 account key for all condition types. Then why few condition types are added to material cost and why others are not added to material cost?
Can any one please help me on this..
Thanks
KB

Assign key "NVV" to those condition types which are to be loaded to material cost.
Hope this resolves ur problem

Condition type missing

Hi all,
2 customized condition type ZR00, ZM00 on which the main pricing is executed in PP, can create condition records the pricing and everthing is working fine, but when i go to transcation V/LD and try to execute an pricing report, those 2 customized condition type missing, was wondering what could be the reason ?
regards

Hello,
this is SAP standard behaviour and it makes sence.
If you customized a condition as manually, then you must be entered the condition type in the order and then you can maintain these condition in the order.
It is not possible to set a condition as manually and then the condition type is with a line in the order with value zero and then you can entered only the value in the order.
Hope this will help.
regards
Claudia

MWST condition type missing in contract creation,VA41

Hi, got a problem here during contract creation. I can't get the MWST show up in the contract condition tab. Analysis result :
010 Access not made (requirement not fulfilled)
Error Message : Pricing error: Mandatory condition MWST is missing
Things I have done :
a) checked pricing procedure V/08
b) created condition records VK11
c) checked customer tax classification : Liable for taxes
d) checked material tax data : Full tax
e) ???
what else did I miss out?
Thanks
Andy

Option 1: If you do not want MWST condition as mandatory, then remove the check from check box in the pricing procedure (T.Code: V/08). MWST is tax condition & Tax condition are normally not mandatory, as it may vary according to Business Requirement.
Option 2: <b>"010 Access not made (requirement not fulfilled)"</b>: Check the access sequence maintained for Condition Type MWST (T.Code": V/06). Next, Check the Access Sequence & the access 010 assigned to it. (T.Code:V/07). Check whether Accesses & fields are assigned correctly.
Option 3: Instead of maintaining condition record for access 010, maintain for different combination & check the result. Even in my case, once the access with reference to tax classification did not give desired result, but was achieved bu maintaining another combination.
Regards,
Rajesh Banka
Reward points if helpful.

Condition types not copied correctly from Me11 to Me21

Dear All,
I am facing a problem in my client place, it is a import scenario where i create ME11 for a material with a combination of a vendor. After maintaining condition types like J1CV, JSDB when I am creating PO for that vendor condtion types are not copied exactly..system excludes some condtions i dont know why but it is working perfectly ion the Qlty system problem is only in Production..pls help me to over come this problem
Regards
Saru

Hi,
Mike is right, it is likely to be a problem aith the priccing procedure.
The procedure allocated to the PO may have been set up without the conditions you used in the Info record?
Check the assignment of the pricing procedure to the PO (there may be a vendor schema group on the vendor master record purchasing view that is pointing to a different schema)
Check in SPRO Logistics > Materials management > Purchasing > conditions > define price determination process > define schema determination.
Look for any setting that uses the schema group from the vendor (if the vendor schema group is blank then the system will use the schema associated qwith a blank schema group).
Then when you can see what schema the P org and vensdor group are pointing to, check the condition types linked to that in the "define calculation schema" menu above the one you just used in SPRO.
Steve B
Steve B

TAXINN Procedure and excise duty condition type Missing

Hi,
We are implementing CIn and found that standard condition based procedure TAXINN and Condition type pertaining to Excise duties (JEXP,JCEP,JECP) and Central sales tax (JCST) are missing.But TAXINJ procedure is available.
We need to know whether Basis need to activate some BC sets or any note need to be applied.
Please guide

Hi
As Suggested, you can go ahead and add those missing codition types in TAXINN. This is nothing new as I did faced the same situation only thing was for me it was Version 4.6c and in consultation with FICO consultant we infact first created and then added those condition.
The best example i can share is we didn't have anything like Higer Secondary Education Cess for excise duties @ 1 % till 2007-08 financial year , If I am correct.
Since the component was incorporated in 2007-08 budget session so the condition type for the same was missing (to add this additional @ 1 % ) , and we first created a condition type and then added this to the pricing procedure to solve the scenario.
Thanks
RB

Condition type missing in Sales order after client copy

Hi All,
I am technical person and looking for administration part. I did client copy from my Prod to Dev sytem by using export import method. After doing this I am able to view all sales orders but the condition types in pricing element table are missing in Dev client, but the in same sales order in prod, the contion types are exist.
My functional consultant saying its because of client copy but as per my knowledge the client copy has special query to copy the content so this could be side effect of the cleint copy.
Can anybody experienced the same problem before. If yes. please provide me the solution.
Regards,
Ramesh.

Dear Ramesh,
I checked the note,as i said certain tables which is copied might not be available in the dev.As staed in the note also they are pointing on the access sequence.Say for example one condition type you copied from PRD will have an *** seq.But the same *** seq will be in a different order in DEV.As this tables and feilds are client independent.So ask your functional consultant to check that.
As i told you we have faced the same issue but in a different area.Then when i changed the seq it worked.
Please check and revert.
Venugopal

0FIGL_O02 - Data missing during extraction

Hi,
I am trying to do an extraction from ECC to BI using the standard BI content - 0FIGL -> 0FIGL_O02.
Although, it extracts most of the data from ECC, certain FI related transactions are missed out for that
extraction period, which I cross validate the data with the F.01 report for the same period
in ECC.
Although, I did the following steps to cross check.
t will be of great help to share your ideas / steps to check.
1. Checked sing the extract checker using RSA3 for that period in ECC.
2. Checked whether the account number is blocked using FS00 in ECC.
Kindly, give your valuable inputs.
Thanks
Bala

Hi Bala,
You mean records count is not matching with ECC or key figure values are not matching with ECC values. As an example amount in BW is not matching ECC amount for a certain period.
Some times due to filter criteria, business logic defined in routines all the data might not be loaded into BW. You need to check from top to bottom dataflow where you are seeing differences.
Regards,
Vengal.

Issue regarding condition pricing date as system date for some condition types in sales order

Hi
I have already created a sales order on 30.04.2014. Today I am adding new line item to sales order in VA02 transaction. in this order new line items condition pricing date for conditions JEX2,JECX should show as 12.06.2014. But currently it is showing as 30.04.2014. I need condition pricing date as system date for above conditions.
Regards
prashant

Hi
When I am changing pricing date VBKD-PRSDT in sales order header . It is changing the condition pricing date for all. Sales order is created on 04.06.2014. I have added line item 150 on 14.06.2014.
After adding line item 150 , there I have changed the pricing date as 14.06.2014. in sales A tab of item 150. But still it is taking from Sales order header date as 04.06.2014 for all conditions. But my requirement is for line item it should take as system date for some conditions like JEX2,JECX& JA1Y but for other conditions it will take as Order creation date. Please suggest. I have also attached screen shot below. please go through it.
Regards
PK
Sales order header change mode VA02
Here pricing date VBKD-PRSDT = 04.06.2016
Item change mode
I have added new line item 150 on 14.06.2014
Changed the condition pricing date to 14.06.2014 & saved
After saving I have gone to Va02 screen of line item 150
& there I have gone to condition pricing date field from item condition tab
for JEX2 condition type but still here condition pricing date is showing as
04.06.2014 as below.
Condition pricing date
My requirement is like this
For some particular conditions like JEX2 condition pricing date will take as system
date instead sales order creation date when I will add a new item 150 on
14.06.2014.but for other conditions it will show as order creation date for the
same line item 150 .

Error occured during extraction from APO to BI 7.0

Hi Experts,
I am in the process of extracting data from SCM(APO-Demand Planning) to BI .I have selected the relevant planning area 9ADP01 and given Generate Export DS in APO system and replicated the same in BI.But before scheduling the InfoPackage,when i checked for the DS 9A0APO_DP_ORDERANALYTICS_1,it displays "Error occured during extraction".I do have a doubt whether I should activate the DS in RSA5 before replication (but am not able to find the DS under DP in RSA5)
I have checked the forums but solutions mentioned did not resolve my issue.
Thanks,
Meera

Hi,
The issue is resolved...
Regards,
Meera

How to see KSCHL (condition type) in IDOC generated from VA02

Hello,
I have a sales order with positions having
Condition type   Amount   Currency Price Unit
ZPR0                100.00     EUR        1
ZPR0                200.00     EUR        1
If I generate an exit Idoc I can see every field from above except for the value of Condition type.
The received systems needs to have such information.
The only whay I found so far is to hard-code 'ZPRO' in the user exit of the receiving system.
Could anyone suggest me better?
Thanx
Christian

Fill the field in the user exit on the sending system. In this way you can pass table values instead of hard coding.

Urgently need solution for Pricing Error: Mandatory condition type missing

Hello, All
I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
When I enter the product in the service order it gives me an error
"pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it cant find the condition record.
I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
Regards
Jacopo François

Hi,
Open u r transaction which u r getting the error, Double click on product u ll get the item level info, Select condition there u click on create icon, there u can define the condition.
OR
While creating a sold to party check whether u r entered a sales area data properly or not.
Hope it helps u
Gentila

Condition Type for item calculated from delivery date

Dear Experts,
We need that the condition type MWST for PO item will be calculated from Item delivery date ,
But we see that always in Analysis pricing the efected date is PO date and not item delivery date .
Please advise how we should configure the condition ?
Thanks,
Moshe

Hi,
In standard configuration you cannot set item delivery date as a pricing data.
Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
IMG link:
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
hope it helps.
regards,
wojciech

Few condition types missing in Outline agreements

Hi,
In PO, I am getting all conditions but in outline agreements (either contract or sch.agreement) few are missing. How to get all conditions in Outline agreements?
Regards,
Sattuj

dear sattuj
check inforecord tab , wether it is getting field or free , if it is rffering any inforecord than make sure that info record have all the condition type ....
reward points if helpfu
thanks and regards
ravikant dewangan

Condition type for pricing came from PC but has not included the additive cost record

hello all;
we have the pricing base for the sales order with the estimated cost from pc; our costing process has a posting record for additive cost is not included on the total cost is sent to the condition type EK02.
question: It is possible to include these kind of postings?, in fact, these record apear on the costing report as part of the cost of sales..
thanks in advanced...

Hi Francisco
Two things,
1. Your condition type must be EK01 if you wanna use it in
Pricing
2. Additive cost in CK74 is at the level of material and plant. It is not at the level of sales order
If you wish to add costs manually in sales order cost estimate, then use Unit Costing as the costing method in your requirement class
Or use Product costing as costing method and use a costing sheet
Br. Ajay M

Some Condition types missing during extraction from 2LIS_11_VAKON

Similar Messages

Maybe you are looking for