Some of the orders are not appearing in KOC4

Hi,
While running the trnasaction KOC4, Some orders are not appearing.which are appearing in KKBC_ORD.
Please guide me how to get the same in KOC4.
Thanking you in anticipation.
With regards
Aniruddha

Some pages may not have all the fields in the xml even though they are being shown on the UI.
Possible reasons I can think of are:
1) Beans are rendered dynamically through controller code
2) Page is using regions or other pages by extending them. There is Extends property in Property Inspector and if filled, those attributes from the extended page can also be seen.
3) Personalization to add elements on the page
-- Thanks

Similar Messages

When printing Gantt chart, some of the bars are not appearing in it

When printing Gantt chart, some of the bars are not appearing in it
I have added print tag in xml of chart mode-multiple pages.
<print mode="MultiPage" print_all_columns="true" />
For printing, I right ckicked on chart and clicked on Print chart..
Edited by: Sheetal on Mar 29, 2012 2:46 AM
Edited by: Sheetal on Mar 29, 2012 2:51 AM
Edited by: Sheetal on Mar 29, 2012 2:56 AM

Sheetal,
Did you ever find a reason as to why the bars were not printing? I'm experiencing the same problem with Apex 4.1.1. Only the first part prints. Here is the print tag:
<print mode="MultiPage" print_all_columns="true" columns_on_every_page="2" fit_timescale_to_end_of_page="false">
I've changed some of these settings to no avail.
-Seth.

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs
DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
(0x800423F3))
All the vss Writers are in stable state
Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
Host is 2012 R2 and The VM is also 2012 R2.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

HT201413 I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

Hi there,
If you are experiencing an issues where iTunes is not recognizing your iPod, then I would recommend taking a look at the article below.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
-Griff W.

I upgraded to ISO 7. Some of the apps are not w orking properly. Example: Text is to large and cannot fit the screen and cannot be reduced. Other apps will no longer rotate. Need a fix.

I upgraded my I pad to ISO 7. Some of the APPS are not working properly. Example: The text is to large for the screen and cannot be adjusted. Other Apps will no longer rotate. Is there a fix?

Have you updated your apps?
I have found that the rotation from portrait to landscape is broken on some apps. That's not iOS 7's fault, it's the App designer. I have a fairly popular app that got updated the day before iOS 7 came out, presumably it was iOS 7 friendly. But no, it doesn't do landscape. Completely incompetent App designers to make that egregious of an error.
You can contact the designer of each of your apps. It's not Apple's problem.

HT4059 I bought an ibook and some of the pages are not visible because of encoding errors. What does this mean?

I bought an ibook and some of the pages are not visible and show and error message that there is an encoding error. Can you help?

There are numerous thread about the same matter in this forum
I hope you'll find your answer
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15

I'm editing a video in imovie '08 and adding iphotos to the movie, but some of the photos are not showing. Help

I'm editing the video of a presentation one of my clients has delivered, I'm adding the slides of the presentation in as photos from iphoto, the problem is that some of the photos are now showing up in the video even though they have been added. Also where photo number 7 should be it is showing photo number 12? I really need to sort this out and need help. How do I get the photos to show and show properly in the right place?
Thank you in advance

I've got a list of things to look at and tryout to see if we can narrow down what's happening. Try any one in any particular order see if the problem keeps happening.
1. What format are the original photos in?
Are the all the same?
If they are different, do some work and others do not?
File formats that are “raw” may be a problem.
File size may also be a problem if they are very large files.
2. Duplicate the project in the Project Library
Try dragging a photo into that copy of the project
Any differences? If you can import photos into the Duplicate, try copying then pasting into the original and see if the image shows up.
3. Duplicate a picture inside of iPhoto
If you want to have a particular picture and can find it within iPhoto try making a duplicate.
Does it show up in the Photo browser? And can you drag that duplicated picture into the project? What do you see, what result do you get?
4. Clean the iMovie cache
Quit out of iMovie. Then go to your Movies Folder > iMovie Events > Project folder name
Drag the folder "iMovie Thumbnails" to your trash. Then open the folder "iMovie Cache" and drag the file "Cache.plist" to the trash.
This should regenerate any cached thumbnails for the project, may be helpful.
5. Try tossing out the iMovie preferences
Quit iMovie.
Open a Finder window to your user's Home folder>Library >Preferences folder. Find the file named "com.apple.iMovie.plist" or "com.apple.iMovieAppl.plist" and move it to the trash.
Try opening iMovie again, then opening the project and dragging a photo from the Photo Browser into the Project timeline.

Some of the machines are not installing windows updates in SCCM 2012 SP1

I have deployed the current month patches to the machines. But, some of the machines are failed to install.
Most commonly I am getting the below errors in windowsupdate.log ,
Report REPORT EVENT: {811D3FE5-A254-4C7E-B7F1-6132320AD5E0}
2015-02-23 08:18:40:851-0000 1
148 101
{00000000-0000-0000-0000-000000000000}
0 80072ee2
CcmExec Failure
Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
::OnScanComplete -Scan Failed with Error=0x80072f78
How to resolve this issue with installing windows updates?
0x80072ee2 looks like time out error.

I have uploaded the log file on dropbox
https://www.dropbox.com/s/bt09vpyhab56dgs/WindowsUpdate%20log.txt?dl=0
I am going to check WSUS IIS log file. I will keep you posted with my findings.
I dont know how to confirm whether the client is talking with wsus server or not. But, I could see some more errors in softwareupdates related logs,
Below is the error in updatestore.log,
Failed to refresh Resync state message. Error = 0x87d00310.
Below are the errors in update deployment.log,
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action - Update Deployment
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action
Updates will not be made available

The menues are not appearing for me to work on a photo, even though the program has downloaded?

The meues are not visable on the photoshop window to work on a photo. I downloaded a bunch of photos to work on but all I can do is archive or rename. How do I get to edit them? Where are the menues? I downloaded the program and it is open.

Most menus will be greyed out until you have an image open, but you can do that via the file menu, or using Ctrl o (Cmd o). Does that work?

HT203200 I purchased an album on itunes and some of the songs are not complete

I have purchased many songs on itunes and never had problems. Recently I purchased an album and even though the downloads are complete and nothing unusual or any problems happened while it was downloading, the songs are not complete. The album plays on my itunes, but each song gets cut off after a minute or two. Is there a way I can redownload the album without having to purchase it again?

Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

SRVR(Service Request) and SRVO(Service Order) are not appearing in IC_Agent

Dear friends,
We are planning to implement Service Requests and Service Orders in CRM 7.0 Interaction Center
The Service Transactions(Service Order/Service Request) are available in 'Service Professional' business role but not available in 'IC_AGENT' role.
The things i have observed
1. Without the channel the Transaction Type was not appearing in SAP GUI (CRMD_ORDER)
2. Even after maintaining the Channels the BUS2000223 (Service Request) did not appear in CRMD_ORDER but the SRVO- Service Order transaction type appeared.(BUS2000116 Service Process)
3. Have maintained the SRVO and SRVR transaction types as dependent transaction types in the 'Business Transaction Profile'; still when clieck on the Service Request or Service Order create I am getting the below error
'No transaction type is available for creating a transaction'
Below is the diagnosis
Diagnosis
No transaction type is available when creating a transaction. This can be due to the following reasons:
No transaction type is available according to Customizing
The user has no authorization for the transaction type
System Response
It is not possible to create the transaction.
Procedure
Make sure that:
The transaction type is set up in Customizing
The user has authorization for the transaction type
Can you please guide me where the actual issue is
Regards
Raj

Hi Raj,
As per your quarries and requirement please go through the link, it will help you in understandable way
http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C35_CRM701_BB_ConfigGuide_EN_XX.doc
Please reward points,
Cheers,
Sunil

In some websites, the caracters are not clear and impossible to read when I scroll down. I have to pass my mouse over it to clear the caracters.

It does that in my Hotmail inbox, my bank account web sites,...
It started to do that about a year of 2 ago. So I started to use Chrome instead. This morning I'm using Firefox because I saw they upgraded and I thought it would not do that again, but the problem is the same.
I open a website la my Hotmail account. The caracters are clear at this moment. Then, I scroll down, and I cannot read some lines of caracters. And it seems like the problem is sporadic. I added NoSquint, and the problem is the same.

# Click the ≡ Menu Button and choose Options.
# Click the Content icon.
# Click the Advanced button.
# Make sure "Allow pages to choose their own fonts" is checked, then press the OK button.
# Click the Colors button.
# Make sure "Allow page to choose their own colors" is checked, then press the OK button.
If that doesn't help,
# Click the ≡ Menu Button and choose Options.
# Click the Advanced icon.
# Click the General tab.
# Click "Use hardware acceleration when available" to toggle that setting.
# Restart Firefox.
If that doesn't help either, check if you have the same problem in Safe Mode.
* [[Troubleshoot Firefox issues using Safe Mode]]
If yes,
# [[How do I create a screenshot of my problem?|Attach a screenshot of the issue]].
# Select the unreadable text, then right-click the selection and choose Inspect Element.
# In Inspector pane that opened, click the Fonts tab on the right. What fonts are listed as being used?

The tasks are not appearing in MPP (but appears once we select show all subtasks)

Hi,
when i open a MPP, none of the tasks are appearing in the task tab, but when i select view--> outline-->show all subtasks, it appears.
Please let me know what is the option to hide all tasks when the user opens a mpp.
Thanks!
Shamsuddeen

Hi Shamsudeen,
As far as I know, there is not such an option.
The project plan will be displayed as it was saved at the last opening. Meaning if the project manager reduce all tasks then save and close, the plan will be as is for the next opening.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

TS3048 I am usng a bluetooth keyboard with my Mac and some of the keys are not working. They are the numbers 1 through 9. I have gone through the troubleshooting for mouse and keyboard and everything looks good. How can I get them to work again?

Hi, I am using a Mac computer that my husband set up. I have worked on it recently with no problems. Today, I am having problems with the bluetooth keyboard not working properly. The numbers 1 through 9 do not work. I have gone through troubleshooting wireless mouse and keyboard issues and everything looks good. Except, when I check the keys on the keyboard viewer, these keys still do not work. The webpage guides me through and at this point I do not know what to do next, because the keyboard is still not working properly. I sure hope there are some experienced people in the community to help me. What should I do?

Hi:
I wish my suggestion had gotten you further.
I do suggest you try to connect the keyboard again. The request for a number is a step in it trying to pair. If it gets by the number, it sometimes takes a little while to get connected. If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin.
Speaking of batteries, if you are not already doing so, you might consider rechargeables. I have a drawer full of them and use a 15 minute charger. I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
I am far from an iPad "expert," although I have one. If my suggestion below does not help, post your question in a separate thread in the iPad forum.
I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense). I quit using iCloud as that added to the confusion. There is a facility to one-time sync items. When you connect your computer to your iPad, iTunes opens. The system begins a process (automatic backup and so on). After it finishes, you can click on "info." At the bottom of the screen, there is an advanced section. You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad.
After all that, I do not use a Google calendar so the information may be worthless to you.
If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options). Me being me, I try never to erase anything.
Barry
Message was edited by: Barry Hemphill

Some of the apps are not showing in the launchpad only the names are not the icon

Some of the apps icons are not showing in launchpad. Only their names are showings

So what version of Premiere Pro are we talking about here?
Describe what "cant select" and "cant increase" means.
We cant see what you are doing or with what or where!
These arent things that get "broken".

Some of the orders are not appearing in KOC4

Similar Messages

Maybe you are looking for