SRVR(Service Request) and SRVO(Service Order) are not appearing in IC_Agent

Dear friends,
We are planning to implement Service Requests and Service Orders in CRM 7.0 Interaction Center
The Service Transactions(Service Order/Service Request) are available in 'Service Professional' business role but not available in 'IC_AGENT' role.
The things i have observed
1. Without the channel the Transaction Type was not appearing in SAP GUI (CRMD_ORDER)
2. Even after maintaining the Channels the BUS2000223 (Service Request) did not appear in CRMD_ORDER but the SRVO- Service Order transaction type appeared.(BUS2000116 Service Process)
3. Have maintained the SRVO and SRVR transaction types as dependent transaction types in the 'Business Transaction Profile'; still when clieck on the Service Request or Service Order create I am getting the below error
'No transaction type is available for creating a transaction'
Below is the diagnosis
Diagnosis
No transaction type is available when creating a transaction. This can be due to the following reasons:
No transaction type is available according to Customizing
The user has no authorization for the transaction type
System Response
It is not possible to create the transaction.
Procedure
Make sure that:
The transaction type is set up in Customizing
The user has authorization for the transaction type
Can you please guide me where the actual issue is
Regards
Raj

Hi Raj,
As per your quarries and requirement please go through the link, it will help you in understandable way
http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C35_CRM701_BB_ConfigGuide_EN_XX.doc
Please reward points,
Cheers,
Sunil

Similar Messages

Problem in opening 'Find Service Request' and 'Create Service Request' HTML forms

Hi,
I am working on creating some date for EBS Service, and I am unable to open 'Find Service Request' and 'Create Service Request' HTML forms.
I keep getting the error message :
Oracle error - 20001: ORA-20001: APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option. has been detected in MO_GLOBAL_INIT.
I have min knowledge of EBS set up and configuration. We just use EBS as a source system for our ETLs. Please suggest any workaround to get resolve the issue.
Thanks,
Kishore

Navigate to System Administrator responsibility > Profile > System. Search for the profile MO: Operating Unit and under responsibility field, put in the responsibility name you are using for creating the service request, click OK and enter the desired operating unit value in the next window. It pulls up all operating units defined and you can chose the desired one.
Thanks
Shree

Tax Code and Tax Amount Fields are not appearing

Hi to all,
While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
for more clarity...
suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
But in F-47 screen Tax Code and Tax Amount fields are not appearing.
Could any body help me on this??
Thanks in Advance
Regards,
Schilukuri

why you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
Even if you find the tax code field and check the tax code check box, system will not calculate tax at the time of down payment or down payment request.
Please remember that by default standard SAP provides the tax code field in f-47 or F-48.

Some of the orders are not appearing in KOC4

Hi,
While running the trnasaction KOC4, Some orders are not appearing.which are appearing in KKBC_ORD.
Please guide me how to get the same in KOC4.
Thanking you in anticipation.
With regards
Aniruddha

Some pages may not have all the fields in the xml even though they are being shown on the UI.
Possible reasons I can think of are:
1) Beans are rendered dynamically through controller code
2) Page is using regions or other pages by extending them. There is Extends property in Property Inspector and if filled, those attributes from the extended page can also be seen.
3) Personalization to add elements on the page
-- Thanks

Difference between ICSS service request and stanadard service order srvo

Hi All,
Is there any difference between ICSS servicerequest and standard service order srvo. can i use SRVO directly in ICSS instead of ICSS service request.
Please provide some inputs.
Thanks,
Priya

Hi Priya,
Yes, there are differences (major) between the ICSS Service Request and a standard CRM Service Order.
A service request in ICSS is basically a query to ask for a specific service when they cannot resolve the problem on-line using other tools such as FAQ's or the solution search. Service requests can be linked to both registered and non-registered products and installed bases. Contracts that cover the requested service will be searched for and warranties can be validated as well. Appointment scheduling for a requested service can be set up as well.
That is about the extent.
True end-to-end service order processing is realized only in the CRM Service Order. Here you can plan the service, execute and bill for a service. You can maintain items (which cannot be done in a service request) such as spare parts, triggering of availability checks, pricing, credit checks, etc... The system will create a sales order for sales related items, thus executing on order to cash back-end business processes.
As you can see they are very different.
ICSS does not support true SAP CRM service order processing thus you cannot use this standard order type in ICSS.
Deb

Service request fields enhanced through AET are not reflecting in BW DS

Hi All,
the CRM developer has added 3 service request fields to crmd_orderadm_h, crmd_service_h via AET. He has marked all the 3 fields as 'BW reporting relevant'.
I have now checked the BW extractors in the hope that these 3 fields will now be appended to the BW service request datasources automatically.
But instead of adding the fields to service request datasource(0CRM_SRV_REQ_INCI_H)(BUS2000223), it added the 3 custom fields to process datasource 0CRM_SRV_PROCESS_H.
I am not sure what exactly have gone wrong . Is there a way to get these custom fields automatically into 0CRM_SRV_REQ_INCI_H.
Thanks in advance,
Ramz

Hi Ramz,
this seems to be identical to
Re: Fields enhanced through AET are not reflecting in CRM DS Extract structure
Please find my reply there.
Best regards
Matthias

HT4009 Simpsons tapped out bought golden ticket and 60 donuts both are not appearing help

Ok I bought donuts and golden tickets in the past I had around £9 and £1 after I bought 60 donuts and I still only have the same amount and also no tickets

Hi Matt,
Based on my research and test in both Outlook 2010 and Outlook 2013, it is by default that only the organizer can receive the declined\accepted response from room mailbox. If we do the following steps:
1. User1 created a meeting request in User1’s Calendar, add Test1 and Test2 in To field as attendees, add Room3 as the Resource.
2. Set the start time and end time which would be a conflict time period in Room3 and Test1’s Calendars.
3. Send the meeting out.
During the sending and receiving, there is no conflict notifications before sending out the request. After the request is sending out, a Declined response is received from Room3 because of the conflict.
In your scenario, please confirm you are creating the meeting request in the Organizer’s calendar instead of directly creating it in Room Calendar.
Regards,
Winnie Liang
TechNet Community Support

How do you add icons to the iPhone which are listed as purchased apps and show installed but are not appearing on the screen.

Some of my purchased apps show installed but don't appear as icons on my phone. How do I get them to be icons?

I am back. I have now sorted out my Launch Pad to be organized the way I want it. I have decluttered my Dock. Very nice.
Now I want to add some of the remaining icons for apps that did not automatically show up in Launch Pad. So, again, how do I do that?
Thanks,
Cliff

Third party sales orders are not showing in Billing due list (VF04 )

Hi,
In Billing due list Third party sales orders are not appearing because VKDFS table those entries are there. How can we get Third party sales orders in VKDFS table as well as VF04 ?
Please suggest me.
Regards,
KUR

Hi Kur & Sandepp,
Check this notes:A) Note 210500 - Billing status of a third-party item,B)2) Note 210561 - When is a third-party item displayed in VF04.
Re
Regards,
Madhu.

Difference between service request and service order

hi all,
What is the differnce between service request and service order? when to use what?
Thanks
Raghav

Service Order -> "You use service orders to record the details of a one-off service agreed upon by a service provider and a service recipient. Service orders contain all the information needed to plan, execute, and bill for a service."
Service Request -> "You use service request management to reliably submit, dispatch, approve, monitor, and fulfill requests for service by your customers. Service requests can be used internally by companies where a department delivers services, for example, in shared service center scenarios, as well as in external customer-facing scenarios.
Service requests can be logged through a service desk, directly by the service personnel, or by the users themselves into the system and then, if necessary, can be dispatched to the appropriate personnel for service delivery."
Taken from http://help.sap.com/
Rg,
Harshit

Create a view - Service Requests and Incidents

Hi all,
I have a Service Manager 2012 environment that has gone through an in-place upgrade from SCSM 2010.
In the SCSM 2010 environment, Service Requests were implemented by extending the Incident class with an attribute that would denote whether the work item was an Incident or a Service Request.
In SCSM 2012 I would like to create a view that would combine the SCSM 2010 "Service Requests" with SCSM 2012 Service Requests.
Is it possible to create a Type Projection that performs the job of an SQL UNION statement? If I was doing this in SQL, I'd be writing a query similar to the following:
Select *
From ServiceRequestDim
Union Select *
From IncidentDim
Where ServiceRequestType = 'Service Request'
(Obviously, some mapping of attributes between the two class types would be needed...and perhaps that's the reason why a type projection of this sort would not be possible...)
An alternate approach - attack this from the Work Item class. It's trivial to create a view that contains Service Requests and Incidents - just set your criteria to be: ID begins with 'SR' or ID begins with 'IR'. Unfortunately, that criteria
returns all Incidents, and I only want the Incidents that have the attribute ServiceRequestType = 'Service Request'. Is it possible to create a Type Projection starting with the Work Item type that employs criteria from child classes?

Work Item is an abstract class, and can't be extended for implementation reasons.
i think Anders has understated the difficulty of combining these views: this is a bit like saying "show me all the orange things, given this bucket of cats and this bucket of fruit" yes, they are both "orange", but fur is not the same
as fruit rind; they're not the same "orange".
the 2010 Service Request implementation was never intended to be a serious use case (i assume you're talking about the SCSM Service Request demo implementation on codeplex), it was intended
to be a demo of what you could do with the form and object interfaces.
The solution here should be simple, convince your client that their solution has been replaced by a newer, better version, Resolve Close and then deprecate these requests, and start reporting only the new type requests. these are history, and dirty data,
and should be ignored.

Service request and information request

This may be the basic question.
But what will happen for the service request and information request.
Information request is getting created as service order what will be the process in ecc
ICSS service request, what will be the process in ecc. is this should be esnt to ecc seperatly or service order can be created in crm.
PRiya

thanks

I am trying to open a service request and the site does not work.

I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

I just went through several screens and had no problems. Try clearing your browser's cache and/or history.

In preferences- saved passwords for Chrome://weave (Mozilla Services password) and Mozilla Services Encription Passphrase) what are these and are they needed?

In preferences- saved passwords for Chrome://weave (Mozilla Services password) and Mozilla Services Encription Passphrase) what are these and are they needed?

They are only needed for firefox sync.

Service request and Complaint difference in ICSS

Dear All,
What is the difference between the Service request and Complaints in ICSS .
Regards,
Pavan.

Hi Pavan,
Could You please check these following links :
Service Request :
http://help.sap.com/saphelp_crm70/helpdata/en/28/cdf11f2f7f4d45b95e5a435c588a90/frameset.htm
Complaint :
http://help.sap.com/saphelp_crm70/helpdata/en/28/cdf11f2f7f4d45b95e5a435c588a90/frameset.htm
I hope this will help.
Thanks and Regards,
Dinesh.

SRVR(Service Request) and SRVO(Service Order) are not appearing in IC_Agent

Similar Messages

Maybe you are looking for