Some vendors' data is not shown in Aging Report

Hi, Experts,
We are using SAP B1 2007A.
Our aging report only shown several vendors' data, eventhough we selected 'All' vendors.
Each vendor's aging report is all right, but we could not show 'All' vendors' aging together.
We tried to select 'Display Vendors with Zero Balances' or/and 'Display Reconciled Transactions'; tried to select the range of the 1st vendor to the last vendor. - - - all of these do not work.
Please help! Thanks!
Lorrie

Hi,
If I am not wrong you are using the 2007A version and the patch level is below 38.
You are trying to run the Backdated Aging report and all your Business Partners are not appearing in the report.
Please check Note No. : [1178854|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1178854].
Regards,
Jitin
SAP Business One Forum Team

Similar Messages

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Date is not shown in messages list

For many emails that I am receiving from different accounts, date is not shown in messages list, only time.
It looks like these messages were received today, in fact they are old.
Encountered this problem on 2 different PCs, 3 different mail accounts (gmail and own server).
What could be the reason and how to fix it?

The messages shown without date are not today's, they can be few days, months or even a year old...

Loaded data is not yet visible in Reporting (see long text) Message no. RSM

Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
Naveen

Hi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen

Loaded data is not yet visible in Reporting (see long text)

hello
all
I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D( 23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
as I solve this problem ?

Jurado,
What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
Probably if you look closely you would know the answer.
Goodluck,
Alex
(Arthur Samson)

Ios 5.1: my calendar dates are not shown in the notification center

My calendar dates (from today and tomorrow) are not shown in the notification center. Under notifications I have activated the calendar app. What can Ido?

IOS / is no out for a couple of weeks and Apple seems to be reluctant to fix this problem. As a business device it becomes rediculous to be not able to see my calender entries anymore in the notification center. Is Apple now leaving the business arena and focusing on toys ?

Need to write a formula in ICM to strip some PV data, but not all...

In previous steps of the ICM call flow, we are setting PV6 with some call data. For example, Parts^(DateTime)^N^N. The carrot is just for a separator.
In a later step, we want to change the Parts to be Sales, but we don't want to delete the datetime and ^N^N. How can I write a formula to strip the first part of the call variable, but leave the remaining and insert the new portion "sales?"
ICM 7.5
CVP 7.0
I'm racking my brain on this one here.
Thanks all!
Cheri

Try setting PV6 to:
concatenate("Sales",right(Call.PeripheralVariable6,(len(Call.PeripheralVariable6) - find("^",Call.PeripheralVariable6))))
The find function will give you the character number of the first occurrance of whatever you specify, so combining "Sales" with the rightmost number of characters of the PV should do the trick. To determine the rightmost (if the Parts part is variable length) you want the total length minus the first x characters before your "^".
I haven't tested it out, so you may need a +1 or a -1 in there somewhere before the last two parentheses to get the exact right length.
Update: I just tried it out in Excel. As posted, it will not include the first "^", so you'll either need to have:
concatenate("Sales^",.....
or
concatenate("Sales",...))+1))

Itinerary table is not shown in Expense Report (IFbA ABAP)

Hi,
We're working in SAP ECC 6.0.4. We enter transaction PR05, choose a travel and click on Results button which opens the Adobe Form "Expense Report/Travel Expense Statement". In some cases the Itinerary table is shown but in others it isnu2019t shown even there is data in PTRV_HEAD table.
We've seen that the trips for which the itinerary table are not shown have the characteristic of not having additional destinations. In 4.7 the table is shown correctly (without IFbA).
How can we correct this problem?
Best regards.

Hi Varsha,
Please pay attention when you are requesting motnly period for
start date : 1st July 2008
end date : 1st july 2008
After saving the period is changed to
Start Date : 7/1/2008
End Date : 7/31/2008
When you are requesting weekly period for the same interval, after sving the dates are changed again, according
you settings of first day of the week. It it is Monday it could be as following
Start Date : 6/30/2008
End Date : 7/6/2008
So you are asking data for not quite the same period.
Do you have data for monthly period in that interval?
Regards,
Victoria Gur

Vertical Line is not shown in 11g Report.

Hi All,
I have some vertical lines (as column separators) in my reports( which I call from form through web.show_document),
which are neither shown in screen nor in printing.
But these lines are shown when run report from Report Builder.
Please guide !
Thanks.
Dass.

Hi,
I am not sure about 11g Report, but generally , pl try to delete the line , create new line - check font of the line as well, some times this will solve your issue.
dassdhan wrote:
Hi All,
I have some vertical lines (as column separators) in my reports( which I call from form through web.show_document),
which are neither shown in screen nor in printing.
But these lines are shown when run report from Report Builder.
Please guide !
Thanks.
Dass.

EMployee not shown in PNP report

I have a PNP report in which a spicific employee is not shown and triggerd by the getpernr, in PA20 the employee is shown normally, is there a way to find out why this person is not triggered by getpernr??
Thks RIchard

Hi,
Can you write your here as your problem is unique.
We use Get Pernr after spacifying Infotypes statement Like.
INFOTYPES : 0000, 0001, 0002, 0006, 0009, 0021, 0185, 0587.
After that in between START-OF-SELECTION and END-OF-SELECTION WE USE
GET PERNR Event>
START-OF-SELECTION.
GET pernr.
END-OF-SELECTION
Now we use Provide and Endprovide for processing. In between that all the Pernr will come.
So Kindly write your code here for better understanding.
Regards,
Himanshu

Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

Siebel - BIP Issue: Data is not populating in the report

Hi Guru's
You have any idea why there's no output data in a section of the report? I generated the xml for a record from siebel and tested that with my updated template and it's working fine. All sections are populated. But when I tried to upload it in Siebel the template and the updated xlf (from generated xml) and run the report, one section of the report don't have populated data. It's pretty weird bip. In that section of the report that without populated data, this is the codes:
<?for-each:/SiebelMessage/ListOfBipPubHlsIncidentIo/PubHlsIncident/ListOfHs1IncidentContact/Hs1IncidentContact?><?sort:Household2;'ascending';date-type='number'?><?sort:Role;'ascending';date-type='text'?>.................<?end for-each?>
Need your thoughts.
Thanks,
JP
Edited by: BIPnewbie on Nov 18, 2011 3:06 AM
Edited by: BIPnewbie on Nov 18, 2011 3:06 AM

HI,
Give the same Selections in the list cube same as in Report and run see if there are any values coming in the Listcube.....If u r getting the values then you should get same in the Report....
Check with the authorizations to view the data....
Thanks/tarak

Dates are not shown correctly

By accident I just noticed that dates are shown quite messy on my MBP with OS-X Lion 10.7.4 for some odd reason I can't find.
It doesn't matter if I have the dates shown in their long form or short form (see screenshot). I had never seen this before, so my reckoning is that it started quite recently.
The error is probably also responsible for some odd behaviour in certain folders. The Pictures and Download folders now have a funky top bar and I can not sort files anymore based on, for instance, dates or anything for that matter (see screenshot)
I found that this problem extends to MS Office 2011 for Mac as well. Notably when I tried to set my Out of Office message in Outlook. The selection box for dates translated 2012 to something like 201220. When I verified my OoO message using a windows outlook client, it turned out the date was set to the year 2020. Obviously I would not have any clue about my availability then just yet, so it's quite annoying actually.
And not just the OoO message is impacted, also other things in Office for Mac. Check out the screenshot of a standard reminder pop up below:
The System Preferences don't show anything odd though. Time and date is set automatically by the Apple Europe server (Apple Europa (time.euro.apple.com))
I so hope anyone can help; thanks in advance for trying!
Cheers,
-Jan

Thanks, this solved the date issue.
However, it didn't solve the problem I experience in the Download and Pictures folder (not able to sort on collums). As it appears to be a different problem I'll start a new thread for that.
Thanks again!!

Trouble importing some shapefile data and Not converting with Planner Geometry

Hello,
We have a Small shapefile projected in EPSG:4326 which are clipped from a BIG shapefile by QGIS.
But this Small shapefile not converting into SQL by Shape2Sql with planner geometry, while converting with Geography option.
Note: BIG Shapefile converting correctly!
Please assist us asap, so that we can move further in our project.
Thanks in advance!

Hi folks,
About the ring-ordering requirement in geography: There's a blog entry about it here:
http://blogs.msdn.com/b/isaac/archive/2007/10/29/geography-and-ring-orientation.aspx and another one here by the same author:
http://blogs.msdn.com/b/isaac/archive/2008/04/06/the-unexpected-too-large-polygon.aspx. Note that things are a bit different in SQL Server 2012 WRT what SQL Server does with polygons that are the "wrong" ring order, because SQL Server 2012 and
above supports polygons bigger than a hemisphere. Pre-SQL2012 these will cause errors. Planar geometry data type in SQL Server doesn't have this behavior because it's not related to the earth at all (e.g. you can use ANY SRID with the same result). The easiest
way to think about it is: "Does your polygon represent Iceland or does it represent everything on earth that is not Iceland?". (
http://www.sqlskills.com/blogs/bobb/the-other-fullglobe-feature-in-sql-server-denali/) This is why polygon ring-order matters with a geography datatype...
About Shape2SQL: This is a 3rd party offering and a don't think the author is actively working on it, or AFAIK still supporting it. So, if it produces no errors, or if it doesn't produce the results you want, it's a black box WRT figuring out why. I've used
it in the past for some simple shapefiles but it has idiosyncrasies. I've not seen the case where it produces no errors and/or no output (no table) before. You can try contacting the author (http://sharpgis.net/page/Shape2SQL) or
using a different program to load the data.
Trying something like ogr2ogr (part of an open-source spatial offering that allows import into SQL Server) or one of SAFE software's offerings (e.g.
http://www.safe.com/solutions/for-databases/microsoft-sql-server/loader-edition/, SAFE also has a 30-day trial download, be sure and get the SQL Server edition) would be helpful because this would at least isolate the problem to something Shape2SQL
is doing or something QGIS is doing in the output.
At this point I'm wondering if the clipping function in QGIS is writing a shapefile with some "shapefile feature" that Shape2SQL doesn't support (or support correctly). But that's just a wild guess...trying one of the other import programs will
possibly get you going in the right direction.
Another choice is to post something to QGIS support (http://www.qgis.org/en/site/forusers/support.html) or on StackExchange as they suggest (http://gis.stackexchange.com/?tags=qgis) to
see if anyone else has run into a similar problem.
If you get any SQL Server spatial errors from Shape2SQL or any SQL Server spatial-specific error messages, feel free to followup here.
There isn't any SQL Server supported solution for loading shapefiles into SQL Server tables, although interestingly the spatial feature of SSRS (and maybe PowerMap in SQL Server's BI offerings) support using shapefiles directly. That won't help you with
this problem, however.
Hope this is helpful, Bob

Invoices posted for future dates could not shown in Outgoing Payment table

Hi, Experts,
We posted an A/P invoice for the future date (next month), and then we'd like to pay it under Banking -> Outgoing Payment -> Outgoing Payment the current date. But when we selected the vendor account, we could not find the invoice listed in the table.
Would this be anyway to show all the invoices posted with a future post date in the outgoing payment table?
Thanks!
Lorrie

Hi,
As it seems to be the current behavior of the system, the best option could be Payment on Account.
You can create a Payment on Account for payment on currenct date and when the AP Invoice is added you can Link the same to the Invoice afterwards.
Look out for other options if provided here by the experts.
Regards,
Jitin

Some vendors' data is not shown in Aging Report

Similar Messages

Maybe you are looking for