EMployee not shown in PNP report

I have a PNP report in which a spicific employee is not shown and triggerd by the getpernr, in PA20 the employee is shown normally, is there a way to find out why this person is not triggered by getpernr??
Thks RIchard

Hi,
    Can you write your  here as your problem is unique.
We use Get Pernr after spacifying Infotypes statement Like.
INFOTYPES : 0000, 0001, 0002, 0006, 0009, 0021, 0185, 0587.
After that in between START-OF-SELECTION and END-OF-SELECTION WE USE
GET PERNR Event>
START-OF-SELECTION.
   GET     pernr.
END-OF-SELECTION
Now we use Provide and Endprovide for  processing. In between that all the Pernr will come.
So Kindly write your code here for better understanding.
Regards,
Himanshu

Similar Messages

  • Some vendors' data is not shown in Aging Report

    Hi, Experts,
    We are using SAP B1 2007A.
    Our aging report only shown several vendors' data, eventhough we selected 'All' vendors.
    Each vendor's aging report is all right, but we could not show 'All' vendors' aging together.
    We tried to select 'Display Vendors with Zero Balances' or/and 'Display Reconciled Transactions'; tried to select the range of the 1st vendor to the last vendor. - - - all of these do not work.
    Please help! Thanks!
    Lorrie

    Hi,
    If I am not wrong you are using the 2007A version and the patch level is below 38.
    You are trying to run the Backdated Aging report and all your Business Partners are not appearing in the report.
    Please check Note No. : [1178854|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1178854].
    Regards,
    Jitin
    SAP Business One Forum Team

  • Vertical Line is not shown in 11g Report.

    Hi All,
    I have some vertical lines (as column separators) in my reports( which I call from form through web.show_document),
    which are neither shown in screen nor in printing.
    But these lines are shown when run report from Report Builder.
    Please guide !
    Thanks.
    Dass.

    Hi,
    I am not sure about 11g Report, but generally , pl try to delete the line , create new line - check font of the line as well, some times this will solve your issue.
    dassdhan wrote:
    Hi All,
    I have some vertical lines (as column separators) in my reports( which I call from form through web.show_document),
    which are neither shown in screen nor in printing.
    But these lines are shown when run report from Report Builder.
    Please guide !
    Thanks.
    Dass.

  • Itinerary table is not shown in Expense Report (IFbA ABAP)

    Hi,
    We're working in SAP ECC 6.0.4. We enter transaction PR05, choose a travel and click on Results button which opens the Adobe Form "Expense Report/Travel Expense Statement". In some cases the Itinerary table is shown but in others it isnu2019t shown even there is data in PTRV_HEAD table.
    We've seen that the trips for which the itinerary table are not shown have the characteristic of not having additional destinations. In 4.7 the table is shown correctly (without IFbA).
    How can we correct this problem?
    Best regards.

    Hi Varsha,
    Please pay attention when you are requesting motnly period for
    start date : 1st July 2008
    end date : 1st july 2008
    After saving the period is changed to
    Start Date : 7/1/2008
    End Date  : 7/31/2008
    When you are requesting weekly period for the same interval, after sving the dates are changed again, according
    you settings of first day of the week. It it is Monday it could be as following
    Start Date : 6/30/2008
    End Date  : 7/6/2008
    So you are asking data for not quite the same period.
    Do you have data for monthly period in that interval?
    Regards,
    Victoria Gur

  • SOD's are not shown in the Report

    We have created the connector in Compliance Calibrator for MQA system
    We ran the user Full Synch and Incremental Synch.
    But the Sod Report doesn't show any SOD's.
    SOD's are shown for the different system's the user has same Roles in
    the two systems.
    Is something we are missing?

    Venkat,
      You need to run 1) Full User Sync, 2) Full Role Sync, 3) Full Profile sync if you are using profiles, 4) Full Risk Analysis and 5) Management Reports to see SoD violations.
    I did not understand meaning of this statmenet:
    "SOD's are shown for the different system's the user has same Roles in the two systems."
    What do you mean by this?
    Regards,
    Alpesh

  • SOME FIELDS SHOULD NOT SHOWN IN THE REPORT

    Hi,
    this is to inform you that,  there is a requriment in reporting perspective (ALV),
    Requriment:
    i have to generate a ALV report which is viewed by our CFO with one t.code, in that report suppose there are 10 fields. 
    That is a specific report if some body apart from my CFO uses the same tcode to generate the same report than it has to display only 5 fields.
    if my CFO uses the same t.code all the 10 fields must be visible.
    please help me how to do it.
    regards,
    balajia.

    There are couple of ways to achieve this,
    1) - Create 2 variants, 1 variant for CFO with all the fields  & 2nd variant with only relevant fields. Then use the authorization concept, where basis can restrict the access / execution of the report with specific variants.
    From the basis view, they create role & assign this variants in one of the object ( not sure). Basis assistance required
    2) - When developing report, write the validation for the respective fields such as maintain Customize table in which maintain userID's & fields which they can access. Display only those fields to the userID who executes this report. It should check this customize table for this UserID & only those fields listed should get displayed. ( for all the fields, instead maintaining each field, you can enter "ALL",
    Eg: UserID -
    Fields
           CFO -
    ALL ( report should display all the fields)
         NONCFO-------Field1 | Field2 | Field3 | Field4 | Field5 ( only these fields should get displayed)
    Note: In Customize table either you can maintain with User ID or Role. It will be more convinient in future as well.
    Regards,
    Reazuddin MD

  • Special characters not shown in OBIEE report

    Hi
    We are facing an issue with column values containing special characters in the reports(OBIEE 11G, 11.1.1.6.5). In-spite of actual column values i.e. special characters, NULL is displayed/shown. It would be very helpful if any work-around/pointer is provided for the resolution of this issue.
    Thanks

    Hi,
    Go with Dhar suggestion, While installing the database itself we have the options "unicode type" for special characters.
    Now Create one more instance and install the database use the unicode option to resolve.
    i faced for arabic character i found this mode.
    for more reference http://mkashu.blogspot.com
    regards
    VG

  • Currency symbol not shown when loaded report using JRC

    I'm trying to show the currency symbol in the report file. the .rpt files is already designed with MS Access table but now im reusing the report and populating pojo classes to map with tables. the report that is bound with MS Access table shows currency symbol in currency fields. but when I load report with JRC, it is not showing. I tried to change Fieldformat also programattically as below.
    ReportObjectController reportObjectController = report.getReportDefController().getReportObjectController();
    ReportObjects reportObjects = reportObjectController.getReportObjectsByKind(ReportObjectKind.field);
    if (reportObjects != null && !reportObjects.isEmpty())
                     for (int i = 0; i < reportObjects.size(); i++)
                         IReportObject reportObject = reportObjects.getReportObject(i);
                         if (reportObject instanceof IFieldObject)
                             IFieldObject fieldObject = (IFieldObject) reportObject;   
                                IFieldFormat ifFormat = fieldObject.getFieldFormat();
                             ifFormatObject = (IFieldFormat) ifFormat.clone(true);
                             break;
    for (int count = 0; count < tables.size(); count++)
                        // Set data source for each table
                        setDataSourceForEachTable(tables.getTable(count).getAlias());
    reportObjectController = report.getReportDefController().getReportObjectController();
    reportObjects = reportObjectController.getReportObjectsByKind(ReportObjectKind.field);
    if (reportObjects != null && !reportObjects.isEmpty())
             for (int i = 0; i < reportObjects.size(); i++)
                 IReportObject reportObject = reportObjects.getReportObject(i);
               if (reportObject instanceof IFieldObject)
                             IFieldObject fieldObject = (IFieldObject) reportObject;   
                             if (fieldObject.getFieldFormat().getNumericFormat() != null)
                                  fieldObject.setFieldFormat(ifFormatObject);
                                  //fieldObject.setFieldValueType(FieldValueType.currencyField);
                                  break;

    Above code just get one of the currency field and clones the format. And after setting the pojo datasource, I'm again setting the cloned format to that particular field. But still  Im not getting currency symbol in the reports that are loaded via JRC. even I set locale before opening the report. but that also not helping.
    report.setLocale(Locale.UK);
    report.open(reportName, 0);
    Please guide me, If I'm wrong in this.

  • Solman system not shown RCA Change reporting for ABAP_Transport store

    Hi,
    We have configured RCA in Solman system.
    We try to get Change reporting comparison of ABAP_transport for Dev and
    Qas system.
    But it shows error as Different technical system in Reference and CustomValue.
    SAP Solution Manager 7.01 SP20
    Regards,
    Karthik

    Jansi,
    After selecting my QAS and DEV system in System Analysis for Change Reporting.
    Select ABAP_Software(6store) of both system and then i click Comapre
    And the status displayed as u201Cu2260u201DChanges were detected of Dev system, then i select the Dev system showing
    Name                                                                 Reference Value                          Status                         Custom Value Details
       ABAP-SOFTWARE
       ABAP_NOTES
       ABAP_PACKAGES
       ABAP_SWITCH_FRAMEWORK
       ABAP_TRANSPORTS                                Different Technical System    Not allowed/Not Relevant    Different Technical System
    I am comapring ABAP_Transport of QAS and Dev system. but its showing  not relevant status.
    Regards,
    Karthik

  • UDF for table CRD1 not shown in XL Reporter

    Hi everyone,
    I created an UDF under "Business Partners - Addresses" (for table CRD1), but in XL Reporter it is not in the UDF list.
    Looks like XL Reporter only recognizes UDFs on the primary table level -- all UDFs built for "Business Partners" (OCRD) are in the list.
    However, I have to put this UDF  on CRD1 level since it's related to ship to zip codes.
    How can I work around it?
    Thanks.

    Hi,
    You have a correct assumption.  Only UDF in OCRD will be available to XLR but not CRD1.  For work around, you need to create UDF in marketing documents to get the UDF value from CRD1.
    Thanks,
    Gordon

  • HELP: Column not shown in Interactive Report

    I have an Interactive Report setup, I have added a new column to the report.
    But the new column doesn't show by default, for anyone to view this new column they need to use the GUI click the gear... and then click columns and add the column to the view.
    I noticed that "default report settings" under "interactive report attributes" the new column isnt listed in "Selected Columns section"
    is that the problem? how do I update this list without rebuilding the report from scratch.
    Thanks Jade
    Edited by: user13002266 on 29-Jun-2010 16:22

    sure, so there actuall instructions in the item half way down the page of the item configuration.
    anyways so what you do it log into the application as the devloper login, so if you have a custon autorisation scheme you will need to set it back to apex, then when your logged in to you app... goto the page with the report, click the cog icon and there is a selext/adjust columns option... when you have finished click cog and save report... you will have an option to save as default... when you save the report your done, and all users will see you changed, remeber to change autorisation back to you custom one if you changed it.
    sorry im on my phone so spelling is prob bad and I dont have apex handy so I have to do it from memory. :)
    thanks jade, hope this helps... should work mint... ask again if you have problem's and I will update this when I have a pc and apex around.

  • GRPO not shown in Inventory Valuation report

    Hi All
    When I run Inventory Valuation report one of the GRPO is not shown in the report where other GRPOs are shown. 
    To the GRPO which is not shown Landed cost is added so in place of the GRPO landed cost document number is displayed with the same quantity and price which originallly entered in GRPO not shown.  Is this normal system behaviour?  Please reply
    thanks
    SV Reddy

    Hi  Sachin,
    thanks for the reply,
    But the Landed cost document value in the inventory valuation report  is same as GRPO document value.  When you add landed cost based on GRPO , in the valuation report it should show GRPO value + Landed cost right, but the system doesnt displya this?  any other reason it could be?
    thanks
    SV Reddy

  • Special characters are not shown in compare document report in Acrobat X

    Hi All,
    I have a pdf document which is having some special characters like üὄ. Now I have updated the document with few corrections and while compare document in Acrobat X special characters are not shown in the report.
    Can any one please look into this and give suggestion.

    Hi Steve,
    Thanks for your reply.
    Platform - PC
    Application - 3B2 and Acrobat 9
    So far we have seen this kind of issue in only one document. In the below screenshot you can see 2 pdf files, the right side one is my MS pdf and the left side one is the exported pdf from 3B2 application both the files having the special characters such as . I just did the text comparison however both   and  is missing in the exported pdf but the reports shown the changes for  characters only wherever the  charactes is missing the report not shown the changes properly(See highlighted in yellow).
    Please let me know if you need more deatails.

  • J/v passed for TDS which not shown TDS Report

    Sir,,
    I faced problem regarding some TDS Like Interest,Salary,  entry passed through which not shown in
    Tds report.
    I not aware about how to passed  this type entry so which appeared in TDS report.
    Pls give me a suggestion regarding above problem.

    Hi,
    Create one time vendor or dummy vendor for all expenses. Then assign w/h tax codes and post the TDS at the time of invoice or payment.
    You will not get report if you directly pass a JV.
    Regards,
    Shaik

  • Attendee Information not shown

    Hello,
    I have a developed a report to retrieve Attendees information for 'MEALS' expense type for an IExpense Report. However for few Internet Expense reports, though attendee information is specified, it is not shown on my report.
    Attendee information is available in 'OIE_ATTENDEES_ALL' table. I have linked the report line id from this table to invoice distribution id of 'AP_INVOICE_DISTRIBUTIONS_ALL' table.
    When Expense Report Import program is run, the expense report will not be visible in Internet Expenses and a new invoice will be created in payables.
    Can any one let me know if there is any other way to get attendee information.
    Thank You,
    Srinivas

    Hi Madhav,
    Thanks for the reply.
    Once import program is run, the data in AP_EXPENSE_REPORT_HEADERS_ALL and AP_EXPENSE_REPORT_LINES_ALL is purged. However the data exists in AP_EXP_REPORT_DISTS_ALL and OIE_ATTENDEES_ALL tables. However I am not sure how I can link the data in these tables (AP_EXP_REPORT_DISTS_ALL and OIE_ATTENDEES_ALL) with AP related tables.
    Please let me know your thoughts.
    Thank You,
    Srinivas

Maybe you are looking for