Some webpages not found

When I go to a website, I get to the main page, and a sub-page. When I make selections from some drop down menus, the next page that appears is "page not found"
Particularly www.mcall.com
My wife searches jobs, puts a location, and the next page shows up. When she tries to narrow the search by choosing a 10 mile radius and jobs posted within the last seven days, the "page not found" comes up. This same page works on my Compac and Emachine using the same network and Windows Explorer.
I can't seem o find any more specific settings that may be causing this problem.

Ok...
Try troubleshooting extensions and third party plug-ins.
From your Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that off if there are any installed. Quit and relaunch Safari to test. If that helped, turn extensions back on then uninstall one a time to test.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

Similar Messages

Webpage not found?

I have oracle 10g express edition. I am trying to load a file and for some reason when I choose my file and click next, I keep getting http 404 webpage not found. What is the reason for this? Can it be fixed?
Thank you in advance.

Can you be a little specific what page you used to load what file?

RMAN-06026: some targets not found - aborting restore

11gR2
Could someone tell me please what am I doing wrong ?
Trying to recover a DB after losing all datafiles , control files , redo log files , and spfile
*1. set my db to archive log mode*
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 58
Next log sequence to archive 60
Current log sequence 60
*2. Set controlfile autobackup on*
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
*3. Perform full DB backup*
RMAN> backup database ;
*4. shutdown immediate and delete all files mentioned above*
*5. startup nomount and restore spfile*
RMAN> startup nomount ;
RMAN> restore spfile from autobackup
2> recovery area = 'C:\app\Administrator\flash_recovery_area'
3> db_name = 'orcl' ;
channel ORA_DISK_1: SPFILE restore from AUTOBACKUP complete
Finished restore at 09-OCT-11
*6. restart and restore control files*
RMAN> shutdown immediate
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 778387456 bytes
Fixed Size 1374808 bytes
Variable Size 310379944 bytes
Database Buffers 461373440 bytes
Redo Buffers 5259264 bytes
RMAN> restore controlfile from autobackup
2> recovery area = 'C:\app\Administrator\flash_recovery_area'
3> db_name = 'orcl' ;
*6. mount DB and perform incomplete recovery*
* and this is where things start to go wrong*
SQL> select sequence#, status from v$log ;
SEQUENCE# STATUS
58 INACTIVE
60 CURRENT
59 INACTIVE
RMAN> run
2> {set until sequence 59;
3> restore database ;
4> recover database ;
5> }
* and now I'm getting the following error : *
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/09/2011 19:04:43
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
* although backup of this db exists *
RMAN> list backup of database ;
BS Key Type LV Size Device Type Elapsed Time Completion Time
5 Full 1.07G DISK 00:00:47 09-OCT-11
BP Key: 5 Status: AVAILABLE Compressed: NO Tag: TAG20111009T185500
Piece Name: C:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_10_09\O1_MF_NNNDF_TAG20111009T185500
3NH4MK_.BKP
List of Datafiles in backup set 5
File LV Type Ckp SCN Ckp Time Name
1 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01.DBF
2 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSAUX01.DBF
3 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\UNDOTBS01.DBF
4 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\USERS01.DBF
5 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\EXAMPLE01.DBF

set until sequence 59;You want to restore/recover up to sequence 58, the given number in until sequence nnn is always not included. So the backed up datafiles are simply too new, backup was done while current sequence is 60.
You need an older backup,which is obviously not available.
Werner

Oracle ADF - SRDemo (some methods not found)

Hi
I am running the SRDemo project in Oracle ADF demo. In step 8 of pg 6-20, they are mentioning to import oracle.binding.AttributeBinding class. I did this import and was requesting in jdev to import some more classes like oracle.adf.model.BindingContainer and oracle.adf.model.OperationBinding.
I imported all these.
Piece of code pasted below:
import oracle.adf.model.BindingContainer;
import oracle.adf.model.OperationBinding;
import oracle.binding.AttributeBinding;
public class SRMain {
public SRMain() {
public String commandButton_action() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("addNoteToServiceRequest");
Object result = operationBinding.execute();
if(!operationBinding.getErrors().isEmpty()){
return null;
AttributeBinding noteText =
(AttributeBinding)getBindings().getControlBinding("noteText");
noteText.setInputValue(null);
return null;
Still some methods like getBindings(),getOperationBinding,getControlBinding are shown as not found in jdev.
Can anyone help?
Regards
Sabarish

Hi,
if getBindings() doesn't exist then you obviously missed creating a variable
private BindingContainer bindings;
with setter and getter methods creatd for it. Also, this bindings object is populated through a managed property in the faces-config.xml file. I don't believe that the tutorial missed this steps out. Please have a look again and create the managed property and the required setter and getter method
Frank

Some songs not found in same album, same directory!

But I can "add file" no problem. This happens whenever I move the music directory or move the directory (I am careful to copy the directory exactly).
So, what is happening in Itunes that some songs are simply not found, although nothing has "relatively" changed except the path? I give it the new path and update the directory.
The downer is that yes you can delete and re-add but you lose all your hard work on the rating system.
Anybody figure all this out?

One way is to select all the tracks and set them to be part of a Compilation (Get Info on all the tracks, then go to the Options tab). The album will then show in the Compilations in the Artists column of the Browser and not under a bunch of artists.
Or you can edit the Artist or Album Artist field so that the information is the same for all tracks. Compilations is probably the most common method for soundtrack albums and such, though.
Regards.

Some tunes not found when sync?

I am unable to tranfer some songs from itune playlists to my white iphone4, I keep getting the message that some tracks were not found.
I also have a black iphone4, and all sync works well,
I am using the same computer for both phones,
Any ideas???
Thanks

Have you been through these steps?
http://docs.info.apple.com/article.html?artnum=93014

Why does iTunes some Videos not found??

If I sync my iPod classic with iTunes there are a few Videos which it can not found, where is the problem??

Are the videos playing back in iTunes? If so, it may be because they're in a format that's incompatible with the iPod Classic. The iPod Classic is only compatible with Standard Definition content from the iTunes Store, or videos encoded in a similar fashion. HD Content will not sync or playback on the iPod Classic.

Trouble downloading itunes 64 bit. when i click the link it says webpage not found. please help!

Having trouble downloading itunes 64 bit on windows 7. When i click download it brings me to a "webpage not available" page. Please help!

The servers are likely overloaded. Try again in a few hours.

Some webpages not loading on new imac

I just bought one of the new Imac's at my local Apple store. I am overall very happy with it, but found that I can not load some web pages. Mainly msnbc.com and apple.com.
Facts:
**All Updates have been installed.
**This happens both when using the Airport or directly
**I am using ATT DSL, not Cable modem
**On Apple.com it displays most graphics but will not display the gray bar at the top of the screen. It's almost as if when it can't display the gray bar it decided to list the links vertically at the top left hand corner of the screen. No pages off of apple.com have EVER loaded.
**These web pages load of my other networked computers at home.
**Did a complete Erase and reinstall of the OS. Same problem.
Any thoughts would be greatly appreciated.
Derek
[email protected]

I'm having a problem loading some pages on my Mac
Book Pro using Firefox and Safari. It's very
disappointing because my favorite page,
www.engadget.com won't load. Is there something I can
do to get these pages to load again?????
An interesting question. Here's what happens when you load
a web page:
1) Your browser assembles and sends an http request.
2) An http daemon receives the request and hands it off to
a child for processing.
3) The child assembles the web page and sends an http
resonse.
4) Your browser receives the response and formats the page.
I think you're assuming the problem is between steps 3 and 4,
but are you sure? Perhaps it's as simple as emptying the cache.
At any rate, there should be more information somewhere which
will tell you where the problem is. Check the activity log in
Safari. Or is it timing out? We need more information to
determine where the problem lies.

X3000 quick setup guide, webpage not found

Two problems:
1. My x3000 wireless mouse that came bundled with the HP computer does not work. I followed the skimpy directions that came with the mouse but got nothing. The mouse lights up underneath so I appears to be on but it still does not work.
2. I desided to visit the HP website for help. Did a search and found a webpage with a link to download the Quick setup guide and another link which say "download manual. Clicking on either link sent me to a page that says "The webpage could not be found"
I wonder if I can return it to the retailer since I just bought it this month.
Currently I am using a wireless mouse from my 2nd (old) computer and it works fine. But I have to carry it from room to room. (one mouse, two computers).

Hi Sunil,
EhP1 for Solution Manager means you have at least SPS18. Therefore documentation based on EhP1 is still valid, although Maintenance Optimizer has been updated as of SPS22+
You can refer to this guide: https://websmp106.sap-ag.de/~sapdownload/011000358700002003492008E
And also this help documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
Regards,
-Rohan

CHVW: some batches not found in chvw table.

Hello everyone,
    someone could explain to me why some movements of batches aren't included in this table? What does it depend? customizing maybe?
    For example, some '321' movements are included but there's others '321' that don't appear.
    Thanks in advance!

linuxos wrote:
I just used these options in exp:
exp system/password file=data01.dmp buffer=10240000 grants=Y compress=Y owner=myuser volsize=0 log=data01.logCan "CONSISTENT" match the parent key and foreign key data automatically?
p.s. All tables are owned by same user.CONSISTENT does not match the parent and child data; it simply makes export take a snapshot of the tables "as they are" when export begins.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#sthref2250

Why do some webpages not finish loading images when using cellular data instead of WiFi?

I'm using iPhone 6 64gb. The problem existed with iOS 8.0.0 and the iOS 8.0.2 update.
I have had trouble with webpages loading slowly over AT&T LTE. Sites with multiple images frequently have trouble loading all the images entirely. Instead, the unloaded portion of the image fills in with black or the image fails to load at all. If I switch to WiFi when available and refresh the page, the images will usually reload completely. I never had this problem with the iPhone 5s on the same websites.

I'm on AT&T with an iPhone 5 first gen. This problem is happening across iPhone4s al of the way to iPhone6+
Thought it was only affecting newer iPhones with new Graphic Processors but I later ruled that out.
Seems to only be happening on LTE / 4G. Is not affected on WIFI for me.
I clear cache, crash browser and even reset the phone but will still get unexpected results in LTE or 4G.
The images seem to be getting prematurely cached and are only partially rendering.
When I save the these half loaded images in photoshop I get a warning that they are damaged and/or truncated.
I have saved images out as PNG and JPGs renders poorly.
About the images-
These images are only 15k and there are 16 on the page so I can't see why they would get bottlenecked when loading.
also, there is no background-color of black anywhere in the CSS.
Note the TV-Like static on the bottom image similar to the comment ryzer08 above.
NEXT IMAGE.....

Moved Library some files not found, what next?

Just moved my Library and renamed it. Tested it and conclude that 30% of my music files seemed to reside in 2nd Library which I removed (after backing up). These files can no longer be found by iTunes. I can restore the backup and try to locate the files, but that would return me to a double library files structure whic I would like to avoid.
So my question is: How do I best consolidate my library?
Is this right?:
1) Restore backup Library to New disk and Folder location (i.e. physically add the files to the structure)
2) Locate the files by trying to play again and opting to locate when prompted.
OR
Use the consolidate function once I have restored.
(I donlt quite understand what the consolidate function does - though it sounds like its just the right tool)
Thanks for any advise on this before I proceed...
P.S. Yes I did opt not to consolidate during the move process when prompted by the iTunes system. That may have been a mistake...

It's probably easier to just drag them back into your itunes library, and delete the references to the ones from the C: drive.
Otherwise you will have to locate each song's new path.
As you've discovered, it's a bad idea to move file locations outside of itunes. It stores the absolute path to each file, so if it changes, it can't find it.

Basic webpages not found.

I am on BT infinity and while normal download speeds and a speed test indicate i am getting great speeds, just done a test right now and the download speed is 74.64Mbps.
But on an evening i cannot seem to beable to get on simple websites, such as facebook, amazon, or other websites i use. It seems to have started the last week or so and doesn ot seem to be a problem at any other time of the day, and it doesn't just happen on the one pc.
It happens on Ipads, phones and laptops.
Does anyone have any suggestions, please.

Sorry this is a bit of a rigmarole: BT, Apple and Microsoft conspire to make your life difficult.
I don't think you can fix DNS on ipads.
On a windows laptop there are various roundabout ways to get there, these depend on Windows version. Try:
1 - right click on the network icon in the bottom right set of icons
2 - choose 'Open Network and Sharing Centre'
3 - click on 'Change adaptor setting' on the left
4 - in the panel that opens, double click on the network interface you are using
5 - in the status window that opens, click Properties
6 - on the Properties window that opens, double click 'Internet Protocol Version 4'
7 - click on 'Use the following DNS server addresses'
8 - on the 'Preferred DNS server', enter 194.73.82.242
9 - on the 'Secondary DNS server', enter 212.118.241.1
10 - Click 'OK' of 'Close' lots of times to close the various dialog windows that opened.
The 'magic numbers' 194.73.82.242 and 212.118.241.1 are ones that I chose based on what was best for me at some point in time. Other people will suggest alternative numbers. It doesn't matter too much which you choose as long as they are reasonably good ones (unlike the default BT ones).
Anyway; try all that and see if it helps on the laptop. If it does, you know that it was indeed DNS issues you had before. If not, I'm afraid you will have to search further for the problem.
If it is a DNS issue, you can contact the mods and see if they can get it chased with BT: may be an uphill battle. You can buy an alternative router to the HomeHub that allows you to put DNS settings into the router. That will then work for all devices connected to the router (wired or wireless).
Really irritating BT don't allow you to change DNS on the HomeHub. It isn't a great bit of kit, but not too bad for many people: for me that is it's weakest point.

Some songs "Not Found"

Had to do a complete re-install of 10.5.6 last month (long story).
Brought over my iTunes Library & Preferences from back-up. All seemed fine. There are all my tunes & cover art. Things working well.
After a few weeks, I noticed that some songs I clicked to play would get an exclamation point at the beginning, and I'd get an alert dialogue saying "iTunes cannot find the song ______. Would you like to find it?", or something to that effect. I can easily navigate to the library of songs, click on the song, and tune is reconnected.
What I cannot figure out is how to re-link an entire CD without doing each track individually (a pain). Or is there a way to re-link all the errant tracks?
This seems to only affect tunes burned from CD, not my iTunes downloads. And even then, not all the CD burns. At this point, I've gone through most of the A-C albums, re-linking by hand.
A shortcut (without looking my play count) would be appreciated.
Cheers!

This might be a good thread to watch. there are others with this problem too and have not done a re-install:
http://discussions.apple.com/thread.jspa?messageID=9769063#9769063

Some webpages not found

Similar Messages

Maybe you are looking for