Sometime wrong endpoint URL getting picked up at runtime at adapter engine

Hi experts,
In our production XI box, sometime wrong endpoint URL getting picked up at runtime at adapter engine.
But this scenario does not happen always. It happens sometime. I have checked url for integration engine in
SLD and also RWB->Component monitoring->integration engine, but in both the places it is correctly specified.
It is very difficult to find the root cause...please help
Thanks,
Nayan

Hi Christian,
May be it is a cluster problem...actual URL must be the URL of the cluster not any specific SAP server box....but in our case sometimes URL points to any SAP server  that may or may not be within that cluster.
Please give some solution to rectify it.
Thanks,
Nayan

Similar Messages

  • Getting message Attempt to determine which Adapter Engines......

    Hello All
    1. I am Getting System message 'Attempt to determine which Adapter Engines are affected by data changes failed' in the Integration Directory.
    Updating SOAP Adapter (Sender channel).
    Refreshed all caches...
    2. Also while testing using SOAP Test client getting response
    HTTP/1.1 500 Internal Server Error
    connection: close
    set-cookie: JSESSIONID=(XIServerName_03)ID1387309050DB21025913116517472411End; Version=1; Path=/
    set-cookie: saplb_*=(XIServerName_03)31556950; Version=1; Path=/
    server: SAP J2EE Engine/6.40
    content-type: text/xml; charset=utf-8
    any idea?
    Thanks in advance

    Hi Naveen
    Thanks for your reply...
    Actaully previously sender channel was working fine, i just updated the default namespace in the channel.
    I was getting the error because of wrong namespace in channel (Case sensitive).
    So i updated this name space and after activation i am getting above message while testing.
    Regards

  • Getting synchron message data from advanced adapter engine

    Hi,
    we have to get all synchron messages from the advanced adapter engine. Normally all messages with errors must be persisted on data-base. How this will be done? We try to with
    /people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence).
    But this don´t work :-(.
    What´s about correct messages? How this can be persisted?
    Is there a API or we must implement a Adapter Module?
    Thanks in advance,
    Frank

    Hi,
    if you just want to see the msg and not its audit log, then in PI by transaction SXMB_ADM - integration engine configurtion - configuration data, add a entry for RUNTIME category LOGGING_SYNC parameter and set it to 1...........then you can see your synch msgs in SXMB_MONI transaction in your PI system.
    Regards,
    Rajeev Gupta

  • Wrong Execution Plan getting picked on some occassions

     
    Hi,
    The following query sometimes runs efficiently; gives quick results, CPU and IO utilization is also up to the mark. But sometimes the query takes very long time to execute.
    At that time I do not observe any blocks as well. Also the CPU and IO is too huge for running this query. It seems the engine picks up wrong execution plan some times.
    This query is fired through some product. So there is no scope to change the query. Any suggestions for the engine to pick up right execution plan?
    select i . bpd_instance_id as instanceId , i . instance_name as instanceName , bpd . name as bpdName , istatus . name as instanceStatus , t . subject as taskSubject , tpriority . name as taskPriority , t . due_date as taskDueDate , t . attached_form_ref as taskAttachedInfoPathFormRef , t . attached_ext_activity_ref as taskAttachedExtActivityRef , t . task_id as taskId , tstatus . name as taskStatus , tuser . user_name as assignedToUser , tpriority . ranking as taskPriorityRanking from msadmin.lsw_task t with ( nolock ) inner join msadmin.lsw_bpd_instance i with ( nolock ) on t . bpd_instance_id = i . bpd_instance_id left join msadmin.lsw_task_status_codes tstatus on t . status = tstatus . status_value left join msadmin.lsw_bpd_status_codes istatus on i . execution_status = istatus . status_id left join msadmin.lsw_priority tpriority on t . priority_id = tpriority . priority_id left join msadmin.lsw_bpd bpd on i . cached_bpd_version_id = bpd . version_id left join msadmin.lsw_usr_xref tuser on t . user_id = tuser . user_id where ( t . status in ( '11','12' ) and ( t . user_id = 5909 or t . task_id in (
    select t . task_id
    from msadmin.lsw_task t with ( NOLOCK )
    inner join msadmin.lsw_usr_grp_mem_xref m with ( NOLOCK )
    on t . group_id = m . group_id
    where m . user_id = 5909
    and t . user_id = -1
    ) or t . task_id in (
    select t . task_id
    from msadmin.lsw_task t with ( NOLOCK )
    inner join msadmin.lsw_grp_grp_mem_exploded_xref x with ( NOLOCK )
    on t . group_id = x . container_group_id
    inner join msadmin.lsw_usr_grp_mem_xref m with ( NOLOCK )
    on m . group_id = x . group_id
    where m . user_id = 5909
    and t . user_id = -1
    ) ) ) order by taskDueDate , taskPriorityRanking , instanceId , taskId

    Is it a good practive to update a stat nightly on all the tables with FULL SCAN? will it help to boost the performance?
    Maybe. But it may also be overkill, particularly if you do not have the hours. A somewhat better option may be to run with FULLSCAN, INDEX to only update the statistics for indexes. But note that if you rebuild an index, that updates the statistics for that
    index with FULLSCAN anyway.
    But overall, there are rarely any magic button to performance tuning. In the end, you will need to do the hard work to find the painful queries that need better indexes or needs to be rewritten.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Wrong Pricing Procedure getting picked up in Value Contract

    While creating Value Contract, when we maintain conditions, the condition type which we want to maintain are missing.
    During a year, PO is made a for a value of around 15 crores. So we need to make  contract which will pick up the same pricing procedure which is picked up for all those PO's. The pricing procedure was specially created for these PO's.
    Now while we create contract it should pick up that same pricing procedure which it picks up in the PO.
    The vendor, material & Purchase Org is same in our contract as it is there in the PO.     
    So I feel when we create a contract it should pick the same pricing procedure as it does for PO's, but our contract picks some other pricing procedure.
    what is the configuration to be done specially for Value contract.
    Regards,
    Karthik

    Hi,
    The pricing procedure is determined differenetly for contract & PO .
    For PO, pricing procedure is determined by the Vendor Schema Group and Purchase Org Schema Group.
    But in case of Contract the pricing procedure is based on condition supplements of condition type PB00.
    Condition type PB00 is considered as master condition type in case of Pricing procedure of contract.
    In std SAP contract system picks up RM0001or  RM1001 because these pricing procedures are maintained in the Condition Supplements of PB00.
    If you want to have pricing procedure other than RM0001 or RM1001 then you need to maintain that pricing procedure in the Condition Supplement of condition type PB00.
    Regards

  • Wrong business system getting picked up

    hi
    I have a SAP  A to SAP B ( sync proxy to Proxy ) scenario...
    Here I have created a Business system called SAP_BACKEND for SAP A...
    When a message is sent from SAP A and I check in SXMB_Moni in SAP A the sender system is not SAP_BACKEND but R3_SAP like that
    how do i change this because this is giving me no receiver determined error

    SAP_BACKEND is pointing to the tech system and client of SAP A...
    Also I have imported it correctly in  ID....
    R3_SAP is not in SLD.....
    How do I check the integration engine config of SAP A ( I checked in SXMB_ADM->integration engine config and it is pointing to PI )
    My observation -- SAP A was earlier pointing to some other PI system . could this be a problem?

  • File not getting picked up by the FTP Adapter.............URGENT

    Hi Experts,
    I have created simple File to File scenario to archive a xml file of size 640 MB with in a FTP server.
    I monitored the channel for 2 hrs, it started but didn't picked the source file.
    Is it because of the huge file size?
    Please give your valuable suggestion, to resolve the issue.
    Thanks in advance.
    MK

    The scenario was working fine before with the small  files.
    Error details in the communication channel monitoring( for the sender adapter):
    error      12/03/08 04:54:12 <message id> Retry interval started. Length: 3660.0 seconds
                12/03/08 04:33:40   Processing started
    error      12/03/08 04:32:23  <message id> Retry interval started. Length: 3660.0 seconds
                 12/03/08 04:20:22   Polling interval started. Length: 3660.0 seconds
                 12/03/08 04:20:22   Processing finished successfully
                  12/03/08 04:20:03   Processing started
    And i have checked RWB and SXMB_MONI, it does not show any message.
    Please suggest further to resolve the problem.
    Thank you.

  • Wrong URL is picked

    HI Experts,
    I have a problem, i am posting in this forum too.
    I am on Ep6.0 SP20. and trying to implement leave request. Necessary workflow templates are activated.,
    in swfvisu, checked the launching of each task.
    I see the entries for approval task:
    Application: LeaveRequestApprover
    Package: sap.com/ess~lea
    Somehow on portal, when trying to launching the task in UWL, a wrong application parameter is picked. i found this through HTTP watcher.
    correct URL: https://<host>.<company.com>:50000/webdynpro/dispatcher/sap.com/ess~lea/LeaveRequestApprover
    URL being Picked:
    http://<host>.<company.com>:50000/webdynpro/dispatcher/*com.sap.xss.hr.lea.appl/*LeaveRequestApprover
    The application "com.sap.xss.hr.lea.appl" does not exist at all.
    Can any body help me where can i control and make the portal pick the right application.
    Regards!

    I have tried the note before, I have done except registering the items with UWL in portal.
    I have done that too now.
    when i execute the task on portal, it seems the browser has a problem running Java Script.
    This is the URL that I am seeing now:
    https://<host>.<port>/irj/portalapps/com.sap.portal.epcf.loader/script/standard/js13_epcf.js?6.0801

  • What is the REST endpoint URL to get list of site collections in Sharepoint ?

    Hi,
    If I go to Sharepoint 2013 site, click on Admin -> Sharepoint, you will see a list of site collections (the link is https://somename-admin.sharepoint.com/_layouts/15/online/SiteCollections.aspx)
    What is the REST endpoint URL to retrieve this list of site collections ?
    I was trying _api/search/query?querytext='contentclass:sts_site' or _api/search/query?querytext='contentclass:sts_web', but it doesn't give the whole list...

    As far as i know, There is no REST endpoint at FARM level
    it would be good to see a possible way to do this.
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • Incorrect url getting generated for content server download

    Hi,
    In the MIC(Management for Internal Controls) system, the standard functionality of downloading attachments after they have been uploaded into content server (FOPC_DB) is not working. When this download link is clicked, it opens another webpage and its URL is pointing to wrong  port number.
    Detailed analysis:
    On further analysis, we arrived at the following observations:
    The URL for Start page of MIC is as follows:
    http://hostname.com:8050/sap/bc/bsp/sap/fopc_start/start.htm?s
    Whereas the incorrect url getting generated during down load is
    http://hostname.com:8097/...........
    The sap webdispatcher is running on the system using port 8050. Whereas the ICM engine is running on port 8097. The download url picks up the port number of default ICM which the sap webdispacher does not allow to display.
    We require help in changing the port number so that correct url gets generated. This url should carry the port number of  sap webdispatcher.
    Thanks for the help.

    DEVELOPMENT (WORKING)
    QUALITY (NOT WORKING)

  • Files not getting picked from the FTP site

    Dear All,
    We are having one File-XI-RFC scenario running in XI-PRD Server. Sometimes what happens is that files available in the FTP site are not getting picked by the File adapter. I have checked in the adapter monitoring and communication channel is active there. Also, there are no errors regarding this in SXMB_MONI. I have configured alerts also but for this case no alerts are getting trigerred. And also when I am reactivating that particular communication channel then that file is getting picked instantaneously.
    Can anybody please guide me on what might be the real cause for this as this error is happening randomly.
    regards,
    N.Jain.

    HI,
    Have you used per File transfer parameter in FTP Communication channel.
    It makes the FTP adapter inactive in ideal time.
    So add the poll interval may be for every 30 mins or something like it. It will forcefully activate the FTP port after every 30 mins. You may have the poll interval for every 1 min. Only the files to be picked up are getting logged in in XI monitoring.
    So there will be no garbage collection of unwanted messages in Monitoring.
    Thanks
    Swarup

  • Sometimes my power supply gets hot

    I have the newest MacBook Pro 15 with the 2.5 Ghz Intel i7. I've noticed that sometimes my power transformer gets pretty when charging the laptop. Other times it doesn't get warm at all. Why would this happen? Is there something wrong with it?

    Hi!
    I have the exact same notebook as you.
    I'm not sure that this is true, but I think that this depends on the difference in charge.
    For example-- as charge from (100% - 40% = 60%) requires more time, it may heat up.
    whereas, a charge up 10% won't heat up as much.
    Matt

  • Webservice Endpoint URL

    Hello,
    I have developed a Webservice Client in Netbeans 5.5 It al works perfect, but how do i change the URL for the ENDpoint or the URL from the webservice?
    Greetings

    I recently has the same problem and needed to change the webservice endpoint URL. I tried the above solution, it has one problem.. to get the port, we need to create an instance of service object. The service class generated by jax-ws (2.1rc1) contains code that tries to access wsdl which was used during build done using wsimport. This URL gets hardcoded in class file and if this hardcoded URL is not accessible from the machine on which app is running, the app throws an Exception.
    I figured a better solution is to use service constructor that accepts wsdl url as a parameter. The new URL may be loaded from a Properties file.
    You may still need BindingProvider if the service location needs to be changed later and you want to reuse the same service object.
    If anyone knows any better way to change webservice endpoint as the application move from dev to test to prod.. I will like to know.

  • Webservice from WSDL - Endpoint URL unchanged

    Hi all,
    I'm following the JDeveloper tutorial here....
    http://www.oracle.com/technology/products/jdev/11/cuecards111/j2ee_set_17/ccset17_ALL.html
    ...in this the endpoint URL is left as http://www.example.com - this gets transformed into....
    http://localhost:7101/ServiceFromWsdl-Project1-context-root/RatingServicePort
    ...I believe at the point the webservice is generated from the WSDL.
    I have a couple of questions....
    1. Where does it get the localhost & 7101 from - at the point of generating the webservice how does it know where I want to deploy it ?
    2. When I generate my webservice from WSDL my URL is left unchanged - it deploys ok to my SOAServer (not the JDeveloper integrated one) but not with the endpoint I used in the WSDL - how do I find this endpoint ?
    Thanks
    MarkF

    OK, I managed to find the endpoint by hacking a few bits of information together....I assumed the port number because I knew the HTTP port number for my SOAServer, the context root is displayed in the deployment log, I then tagged on the Port Name from my WSDL .... et voila !
    Still begs the questions....
    1. Is it supposed to overwrite the URL in my original WSDL ?
    2. Is there no easier way of finding out the endpoint for a deployed WS ?
    Thanks
    MarkPF

  • When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... please help

    When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... than I have to wait 2 - 3 minutes and call again.
    please help

    Has nothing to do with the SIM or master reset.  This has been done to my phone.  The SIM once and the factory reset many times over.  You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract.  I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong.  I about got fired from my job for not getting my calls and texts.  The BBB has now been contacted, and I feel your end should shore this up for all of us!

Maybe you are looking for