Sometimes AP's don't accept clients, no error logging

Hello,
We use AIR-LAP-1242AG-E-K9 ap's and WLC 4.2.176.0
Sometimes I have access points who do not accept clients, you also can't see the AP with a wireless sniffer....
When I reboot the AP, it's working fine again !!!
In the WLC the AP and radio's are up, and no error messages I could find so far ...
Anyone who has/had the same problem ?

Have you turned on AP logging from the WLC?
>config ap logging syslog level ?
alerts         Logging severity level 1.
critical       Logging severity level 2.
debugging      Logging severity level 7.
emergencies    Logging severity level 0.
errors         Logging severity level 3.
informational  Logging severity level 6.
notifications  Logging severity level 5.
warnings       Logging severity level 4.
(Cisco Controller) >config ap logging syslog level alerts ?
     Enter the name of the Cisco AP.
all            Applies the settings to all APs.
(Cisco Controller) >config ap logging syslog level alerts all?
all
(Cisco Controller) >config ap logging syslog level alerts all
All the logs will then be sent to the syslog server in the WLC settings

Similar Messages

  • Access points wont accept clients on 2.4 GhZ

    Hi
    We are having some Issue with some Access Points are dropping clients on 2.4 GhZ radio, the radio is if you SSH to the Access Point "Dot11Radio0 is up, line protocol is up".
    Our setup is 2 x Wism2 controller (7.5), a CPI (1.4), and around 750 Access points of various types (1121, 1131, 1142, 2602).
    If we reset the Access Point from CPI it comes up and it will again accept clients on 2.4 GhZ for a random time period, sometimes it works for some hours, sometimes for a couple of days, total random.
    The once we have seen the problem on is as I know 1142:
    Software Version
    7.5.102.0
    Boot Version
    12.4.23.0
    AP Model
    AIR-LAP1142N-E-K9
    IOS Version
    15.2(4)JA1$
    Hope to get help finding a solution.
    Best regards
    Jørgen

    If you have a high density deployment, you might want to look at your RRM. What is the power set to on the AP's. If the power is set too low, that can cause clients not to see or be able to join an access point. If this is the case, you need to set the min tx power level for the 2.4ghz radio which is under the wireless tab in the 802.11bgn TPC.
    If you have an issue with a certain AP model, it might be a bug, but you didn't mention what model AP is was happening to.
    Sent from Cisco Technical Support iPhone App

  • SSLServerSocket that only accepts client connections from localhost

    My end goal is to create an SSLServerSocket that will only accept client connections requested by localhost.
    I've tried creating a new SocketPermission:
    p1 = new SocketPermission("localhost:1024-65535", "listen,connect,accept")I am able to add it to a custom Policy's PermissionCollection, but it doesn't seem to work. I believe SecurityManager.checkAccept() only checks the host's name and not the client's...
    This following code works and illustrates what I'm trying to achieve, but I'd like it to happen before the socket is actually accepted:
    SSLSocket socket = (SSLSocket)m_sslServerSocket.accept();
    Strintg clientIP = socket.getSession().getPeerHost();
    if( !clientIP.equals( "127.0.0.1" ) & !clientIP.equals( InetAddress.getLocalHost().getHostAddress() )
        // reject connection
    }Any help is appreciated.
    Edited by: misterE on Oct 24, 2007 10:46 PM

    I'm not clear whether you are doing this Permission thing on the server side or the client side, and/or whether you have a SecurityManager installed.
    If the server only has SocketPermission("localhost:...", "listen,connect,accept") it should only accept connections from localhost, not from B. So I don't know why the first scenario worked.
    If the server only has this SocketPermission with some other hostname, it shouldn't be able to listen at any port. So I don't know why the first scenario worked.
    Unless there is no security manager installed.
    You can run it with -Djava.security.debug=access,failure to see what permission checks are being executed.
    BTW because connections are accepted by the TCP stack before permission checking takes place, as described above, the client won't get a ConnectionException if the permission is refused at the server: it will get most probably a SocketConnection: connection reset by peer when writing to the server.

  • Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

    regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

    Hi Jason
    I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
    the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
    I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
    Just a thought, obviously try at your own risk but it worked for me.
    Kellen

  • HT204053 Hello, I want to change my ID but I can't.i go to my iPad store and sign in my new ID but don't accept.

    I want to change my ID but I can't.i go to my iPad store and sign in my new ID but don't accept

    I find that the  easiest way to change the account you are using on your mobile device is to scroll down to the bottom of the iTunes Store or App Store on the device and tap the Apple ID button. Then:
    - To sign out, or to sign in to a different account, tap the Sign Out button.
    - To sign back in, tap the Sign In button, then tap either Use Existing Apple ID or Create New Apple ID, and follow the on-screen instructions from there. I hope this helps.

  • I've bought books and now want to buy another but don´t accept my credit card details, why?

    I've bought books and now want to buy another but don´t accept my credit card details, why?

    Nobody here could possibly know why your credit card is not being accepted. We don't work for Apple, we are just other users voulnteering out time to help.
    Did you get any message from when you attempted to make the purchase? Did you review your credit card details in your iTunes account? Did your crest card expire and you forgot about it?

  • Mac OS X Mountain lion bug sometimes the programs don't like to lunch and I unplug the power cord what shall i do

    Mac OS X Mountain lion bug sometimes the programs don't like to lunch and I unplug the power cord what shall i do

    Here are some suggestions for getting the best results from this site.
    If you're not comfortable with English, it may be best to post in your native language. Others can use automatic translation, if necessary, to help them understand you. They may reply in their native language, and then you can do the same to understand them.
    Google Translate
    Screenshots can help overcome a language barrier. To upload an image, click the camera icon in the message editor on this page.
    Give details of the problem. A statement such as "it doesn't work" conveys no information. If it did work, you wouldn't be here. Instead, you should post something like this: "I did A; I was expecting B; but I got C instead." Include the complete text of any error messages you saw and where you saw them: in an application window, a CrashReporter window, a log, or whatever. Also include the steps you’ve taken yourself, if any, to try to resolve the issue. If the problem is of recent origin, did you make any changes to your setup just before you first noticed it? Is the problem reproducible or intermittent? That is, does it always manifest itself when you take a certain action, or only at unpredictable times?
    Before posting, ask yourself whether it’s likely that you are the the only person ever to have had this problem. If not, search the discussions for answered questions similar to yours. If you found any pertinent information, but it didn't help, include details.

  • Jquery ui css is not loading in my page, i done this using client library....i tried to check using

    jquery ui css is not loading in my page, i done this using client library....i tried to check using firefox.. firebug addon..the css is showing as empty...so finall css is not calling can you please suggest the solution for this...

    Thanks for ur response...I followed the same link what you suggested for me...
    actually i try to display the buttons in  jquery ui buttons format but it is showing as normal buttons..so i checked uisng firebug ..here css showing as empty.....
    please suggest the same..
    In css.txt.. i write css file names like the below..please confirm is it correct or not
    jquery-ui.min.css
    jquery-ui.css
    Thanks in advance...

  • Don,t accept my apple id in app store

    don,t accept my apple id in app store

    Welcome to the user to User Technical Support Forum provided by Apple.
    Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.

  • Trouble with BR1410 accepting clients

    Hello all, I am having trouble configuring a 1410 bridge to accept clients. I am running SW 12.3(7)JA3. I set the bridge to Root mode and assign basic settings but cannot connect with a client. I can see the SSID broadcasting. Any ideas?

    Check if client sees the SSID of the bridge.If not adjust the channel number on the bridge. If SSID is broadcast check for the authentication type.Is it configured same on the bridge and the clients.Refer URL for configuring the bridge
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080606d4a.html#wp1101651

  • Band Select - Acceptable Client RSSI.

    Band Select, "Acceptable Client RSSI".
    Is the RSSI in this parameter the RSSI measured from the 2.4GHz or 5GHz?
    Is it the signal the client measures from the AP, or the signal that the AP measures from the client? (I assume AP measures from client).
    Also how would you go about determining a "good" setting for "Probe Cycle Count (for a client neutral network)? The default is 2 but I think it used to be 4. 4x200ms (scan cycle period threshold) is 'only' 800ms which is not all that long IMO if it helps more traffic get to 5GHz.
    Thank you.
    -Dale-

    Dale,
    The RSSI is measured from the 2.4ghz and it's from the AP not the client. Does this work all the time... No it doesn't. The issue you might see from extending the default settings is the device might not connect at all. The client device will make the final determination. You will need to test and decide what works for your devices.
    Here Is a good link.
    http://itnetworkingpros.wordpress.com/2010/11/10/cisco-band-select/
    Sent from my iPhone

  • Iteratively accept client requests

    Hi,
    My server has to accept client requests iteratively. Below are my codes. However, I find that a request is processed twice and after which error of file not file which is somewhere else of my codes is printed non stop. Not sure is it due to the loop. Can someone please advise?
    the file not found codes is somelike. if file does not exist then print file not found error.
    Socket connectionSocket;
    while(true) {
              connectionSocket = null;
              try {                  
                  connectionSocket = listenSocket.accept();
                  // Read client request & initialize output to reponse to client.
                  BufferedReader inFromClient = new BufferedReader
                   (new InputStreamReader(connectionSocket.getInputStream()));
                  outToClient = new DataOutputStream(connectionSocket.getOutputStream());             
                  String requestMessageLine = "";
                  requestMessageLine = inFromClient.readLine();             
                  StringTokenizer tokenizedLine = new StringTokenizer(requestMessageLine);  
                  System.out.println("requestLine");
                  request(tokenizedLine);                    
              } catch (Exception e) {
                  System.err.println("Error: " + e);
              finally {
                  if(connectionSocket != null)
                   connectionSocket.close();
             }

    Your code references external classes and methods that you did not include.
    Also, it is VERY RUDE to 1) Not be an English speaker, and 2) Post code without asking first.

  • Why they don't accept my visa card?

    Why they don't accept my visa card?

    Is it a Visa DEBIT card ?   Debit cards are not acceptable payment methods

  • HT1689 Why they don't accept my credit card ?

    They don't accept my mastercard for payment why ?

    Contact the Apple store for information. We are all just users here.
    Apple Store Customer Service at 1-800-676-2775

  • IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error

    IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error,

    spacepilot wrote:
    i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me  new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
    all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
    foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with  a firmer grasp of english that the normal call centre staff
    welcome to the forum    why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for