Sometimes, some images are not shown...

Hi!
Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

I am having a similar problem so maybe someone can help me too.
I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
        MediaTracker tracker = new MediaTracker(applet);
        for (int i = 0; i < img.length; i++) {
          img[i] = applet.getImage(urlCodeBase, imagePath + images);
tracker.addImage(img[i], i);
tracker.waitForID(i);
if (tracker.isErrorAny()) {
System.err.println("Error loading image " + images[i]);
My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
Any ideas would be a great help!

Similar Messages

  • Button Images are not shown

    Dear All,
    In one of our test instance, some button images are not shown, whereas some are.
    They are shown as grey button.
    I searched metalink, according to them patch 1238573 should be installed, which is already installed.
    What could be the reason?
    Also, is there any way to find out which images are missing?
    Regards,
    Ashish Shah

    Hi
    I've seen this happen a few times. The solution is usually to synchronise something called 'the X-Server' with the middle tier. I'm afraid that the technology is over my head, but it does work!
    The X-Server controls how images are rendered in the e-Business Suite. Your DBA should know what this is and it's a simple matter of stopping and restrating the X-server.
    That should do the trick!
    Regards
    Tim

  • Some images are not appeared  on the JButton

    Hi all
    I want to appear an ImageIcon on my JButton
    Some images are appeared on the button when run the code,
    but some images are not and the button appeared as a default
    button why ?
    the problem in my code in this statement
    JButton   merc = new JButton (new ImageIcon(" door.jpg " ));Thanks in advance.

    I suggest that you break down your statements even further to see where the problem is.
    So if this the problem is on this line:
    JButton   merc = new JButton (new ImageIcon("door.jpg" )); //string corrected?try to break it up a bit like so:
    JButton merc = new JButton();
    File imageFile = new File("door.jpg");
    if (imageFile.exists())
       ImageIcon icon = new ImageIcon(imageFile);
       if (icon != null)
          merc.setIcon(icon);
       else
          System.out.println("icon == null");
    else
       System.out.println("image file doesn't exist");
    }

  • [Solved] Some icons are not shown in certain websites.

    For example:
    trello.com
    gist.github.com
    is like this:
    many icons are not shown correctly. It happens to all browsers(firefox,chromium,opera) I tried in archlinux. So I guess it' s an issue with some graphic library.
    It also happens to a gitlab server site I set up:
    How can I debug this? Does it happen at your place?
    EDIT: Solved by uninstalling change colors extension for chromium, deleting .mozilla solves for firefox, still happens for opera.
    Last edited by xgdgsc (2013-06-08 12:38:08)

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

    I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Why Images are not shown?

    Post Author: azharrahi
    CA Forum: .NET
    Hi How are all here ?I am using Crystal Reports in Visual Studio.net 2005. Now the problem is that Images are not loading in the web broweser. At runtime in visual studio.net 2005, the Images of Crystal Report Viewer are shown but the Image we insert in the picture box of Crystal Report, it does not show. But in the web browser after uploading web site using URL, it does not show images of Both i.e. CrystalReportViewer and Picture Box. What the problem is that? This has made me annoyed a lot. Anybody can help me please.

    Post Author: robarahz
    CA Forum: .NET
    I had this problem (if I understand you correctly) and the problem was that the new Crystal Report Viewer toolbar was expecting the images to be in teh same folder as the website, but they are actually located one level up in C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727\CrystalReportWebFormViewer3 (or CrystalReportWebFormViewer4 if you're on VS2008).
    To fix this, I copied  the aspnet_client folder into the folder of my website, and everything is fine.
    Hope that helps.
    -robert

  • Some images are not loading...including yahoo logo on search pages. Firefox 8.0

    most images are not showing up in browser....including yahoo logo on search result pages and icon images in gmail. I have uninstalled and reinstalled firefox.

    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images permissions.default.images
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Some parameters are not shown in parameter dialog

    Hello,
    I created a VB.NET program using VS2005 sample.
    When the program refers to CR10's DLLs (VS2005 bundle),
    it prompts all parameters correctly.
    But when the program refers to CR12's DLLs, some parameters are not prompted.
    I installed merge module 12.2.
    I also checked CR11 (merge module 11.5) and  found the result is equal to CS12.
    Thank you

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Images are not shown after deploying in apps

    After deploying my application in apps i have put all my images in media folder even then the images are not displaying, can any tell me what is the reason for this, but when i have deployed before it was working fine...

    when the page is displayed without the image, right click on the image place holder and click on properties. Under General tab,
    address will show you the place/url page is looking for the image. Make sure you have put the image on that path and the name of image mathes the case as well.
    --Tanveer                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Some images are not getting loaded

    I am online tutor. And today i got a problem . Images are not getting loaded and also many things are not getting loaded. But when i use internet explorer i don't have that problem . But i don wanna u internet explrer. Can any one help me. And the site with which i am facing problem is tutor.tutorvista.net

    Please try the instructions in this article: http://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show
    Hope this helps. :)

  • Some appointments are not shown sometimes

    I access a Webaccess server that is in GMT+1 timezone from GMT-5 timezone and have GW set to either GMT-5 explicitly or use workstation's timezone. I did this test on Sunday Feb 26 and couple hours into Monday Feb 27 (GMT-5) - I created an appointment for Feb 26, 11:00-11:59pm from within a week view. As soon as it was created, it was not shown either in week or day views or basic interface, but could only be seen in month view or when searching for appointments. That is just an example, it was not a single occurrence, but I had several test appointments like that. Then I also had appts that were not shown even in month view, but only in search results. Regarding that Feb 26 appt, it could be made seen again in day or week views if a different timezone was chosen in options. Today, Feb 27 at the end of the day, that appointment is seen no problem in day and week views and also in basic interface, so I do not have a reliable way of reproducing the problem. Since the appt was not shown even in basic interface before, I suspect it is a server time computation/database query problem and not browser graphics rendering problem. Also, there used to be a pdf file with Webaccess API that showed how to query calendar with startDate and endDate parameters which can be done in basic interface by manually editing the address field in browser and that part is broken too - Webaccess does not show some appointments after given start date, until the start date is moved up earlier to coincide with start of the day in GMT timezone. All that used to work fine in earlier GW versions. It looks like in GW2012 some big design changes were made and some serious bugs were introduced.

    The missing piece is how ( every other way of accessing the calendar ) sees the apointment. What happens from the Windows client? Does it show the missing appointment created in webaccess?
    Its certainly possible that some boundary condition bug is being exercised. But we need to get this to the point where it can be easily reproduced. I suspect the issue has to do with the time zone being signed differently, e.g. +1 vs -5.
    Webaccess is essentially a rewrite in 2012, this eliminated the GWINTER server component and so there are a lot of positives to this move. All things considered, its been pretty decent.
    -- Bob

  • Some images are not visible

    Hi,
    I have a recordset which has 79 records with images. Report not showing last 9 images (sometime 10 images). Even I changed to display records in descending order then last 10 are visible as these images are at start, now i am unable to see
    again last 9 images, which were visible when these were at start.

    Hi Mahendra,
    According to your description that you always go the last ten record not display in the report, right?
    I have tested on my local environment and can't reproduce the issue, please try to answer and check the information according to the question below to help us better analysis about the issue:
    Please Execute the query in the query designer to see if you can get all the 79 records.
    How many columns in the reports? Did the field of the image comes from Database - select a row that contains the image from a database table?
    So, you got the entire 10 rows with multiple columns not shown in the report,right?
    As
    yosedesh mentioned that please make sure you have checked all the pages and you can also export the report to HTML or MHTML to see if you can see all the record display.
    I recommend you to recreate the tablix or redesign an new report the same as this to see if you still have the same issue.
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Some fonts are not shown correctly in LabVIEW 2012

    I found a bug related with fonts in LabVIEW2012 f3 KR.
    - When I select NI7SEG in font selection dialog, right font is not shown in the example box.
    - Draw text at point.vi shows same problem for some fonts while other fonts are working.
    I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google. 
    So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK. 
    * OS: Windows 7 32bit KR

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • Some icons are not shown correctly in Gnome tray

    The image should tell everything. In the tray there should be icons from Guake, Dropbox and Skype. However only Skype is visible. Does anyone know where could be the problem?
    I noticed that Synergy icon behaves also wrongly.
    thanks
    Jan

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • Documents or images are not shown in document viewer properly.

    Hi Friends,
    we are using sap ecc6.0 release 700.we have implemented document viewer functionality to one of our application.we have Adobe in our system.some times documets(pdfs) are shown properly in document viewer.but some times documents are not open in document viewer.in this case if restart the work station PC ,document viewer working properly.so we have to know any ways to correct the bug without restart the workstation PC.
    please suggest any ways to correct it.

    Hi Venkat,
    i am not sure about it, but lets a try ask to your basis consultant for the latest gui .i.e. 7.3 with patch level 8, use the latest GUI and then see , is still you are getting those problems, please revert with your answer.

Maybe you are looking for

  • I NEED TO TRANSFER THE BOOKMARKS FROM ONE USER TO ANOTHER IN THE SAME COMPUTER??

    I have created the recommended second user site on my computer. Also I have Administrator user site on the same computer that I do not wish to use sometimes. Both users are having the same Mozilla browser (win7) but the second user does not have book

  • Setting a password at the web gallery level

    Hi, I would like to host multiple password-protected albums in my web gallery but don't want to require my viewers to enter a password for each album they visit. Is there some way I can set password protection at the web gallery level and make all al

  • InDesign CS6 crashes on large PDF export...

    I have my company's catalog done through InDesign.  We've done this the same way for years.  I've had this file for the last 3 years and have never had an issue exporting the full catalog as a PDF.  I can no longer say that. When I try to export the

  • Make an MP3 CD for car stereo

    In reviewing a number of postings here and elsewhere, I've had no luck in making such a CD. I have a playlist that I'd like to burn to a CD for the car. I've changed Preferences/Import Settings to mp3. I've selected the tracks in the playlist using C

  • Can pay in appstore, cant pay for in app purchases

    Hi everybody Reent.y i send this mail ( read below ) Does anybody knows? Does this sounds familliar to anybody? I am tired Of all these small errors and technical issues with apple and their payment systems. This is the mail, wich contIns my problem;