Sooo... How does one restore a Time Machine backup to an Air?

My girlfriend is getting an hand-me-down air to replace her white MB whose logic board recently died. It comes in today, I was going to restore, I realized that I can't boot up and select that drive without starting up into a OS X dvd. How the heck are you supposed to restore an Air? Is there an elegant Apple solution? Everything I seem to find on the 'net is pretty difficult/ridiculous.
Thanks...

If the computer is bootable, you can run the migration assistant from the applications folder (assuming you have enough free space on the harddrive).
Otherwise, there's a number of ways to remote reinstall or restore from the MacBook Air without a superdrive. A USB superdrive or other optical drive would be fastest, but the remote disk option is also possible with a little patience and a lot of time.
http://support.apple.com/kb/HT2129

Similar Messages

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How do I restore a Time Machine backup to a new hard drive in an iMac 5.1?

Hi all,
I recently had a hard drive failure in my mid-2006 iMac 5.1 and have now installed a new drive. The iMac was previously running an up-to-date version of OSX 10.7 - Lion. However I've struggled to restore the machine from its Time Machine backup, trying using both Setup Assistant which has never allowed me to overwrite my startup files with the restore, and several attempts using Migration Assistant and following Pondini's Migration Problems tutorial, which worked partially, but has left me with a series of files/folders, many of which have Permissions problems.
The most recent attempt, using Migration Assistant is giving me a new error message:
You can't transfer from your other Mac to this one because your other Mac uses a newer version of Mac OS X. You must upgrade this Mac before you can transfer from your other Mac.
I'm getting it that the Time Machine data is more current (in terms of OSX) than my desktop machine - which I have prepared using my Snow Leopard start-up disc (but wonder why this is the first time that I'm getting told this on attempting to restore). But how do I get my iMac to a state whereby I can restore from the Time Machine?
I can't upgrade the Mac using Software Update as this will only get me to OSX 10.6.8 (which is where I currently am, although some applications don't seem to want to work in this state - App Store, Safari on occasion); I can't download OSX 10.7 from the App Store as it is no longer there, and I can't install OSX 10.8 as my iMac is not compatible with this release. I seem to be stuck in an infinite loop from which I don't seem to be able to get out of.
Can anyone help at all?
Many thanks in advance for any contributions & apologies if I've omitted any crucial information that might be needed to help me out.
Paul

Thanks den.thed,
Apologies for not replying back sooner - I've been away.
Although your suggestion helped me in getting a copy of Lion that I could use, it didn't help with the restore from Time Capsule issue. I had to download the Lion app onto my MacBook & then transfer it across but it wouldn't let me upgrade my OS for some reason, so I ended up wiping the iMac completely and restoring via my Snow Leopard install disk. For some reason, this time, it let me have the option of using Setup Assistant to access the Time Capsule for a complete restore.
Now, over a week later, with various bits of tweaking and reinstalling some apps that didn't seem to come across, I have my system back.
Thanks for the help anyway.
Cheers,
Paul

How do I restore from time machine backup onto unmounted disk drive "disk0s2?" :-(

In trying to restore my MacBook Pro after a strange freeze, I seemed to have unmounted the main disk drive. So, I have no drive on which to restore my computer using my time machine backup. What do I do now???

Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
See if you are able to get the partition to mount. If not select the Terminal from the Utiilities menu. At the prompt enter:
sudo mount disk0s1
Press RETURN and authenticate. Your password will not be echoed. Press RETURN again. I'm assuming you have a disk with one partition. If that's not correct, then do not use the above command.

How do I restore from time machine backup

I haven't done this backup/restore thing yet, and getting ready to upgrade to Mountain Lion from Snow Leopard. Does anyone have a step by step workflow?
Thanks ever so much!!

How to Install Lion/Mountain Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to
      the Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before
      installing the update unless you will boot from this drive and install the
      update on it. Reconnect it and turn it back on after installation is
      complete and you've restarted.
2. You may experience unexpected results if you have installed third-
      party system software modifications, or if you have modified the
      operating system through other means. (This does not apply to
      normal application software installation.)
3. The installation process should not be interrupted. If a power outage or
      other interruption occurs during installation, use the standalone
      installer (see below) from Apple Downloads to update. While the
      installation is in progress do not use the computer.
D. To upgrade to Lion/Mountain Lion:
1. Purchase the Lion/Mountain Lion Installer from the Mac App Store.
      The download should start quickly. Lion is nearly 4 GBs so a fast
      internet connection is essential. Download time could run upwards of 4
      hours depending upon network conditions and server demands at the
      time.
2. The installer will run automatically after the download is completed.
      Click on the Install button to begin the upgrade.
3. Follow instructions for installation.

How do I restore a Time Machine backup from a newer MacBook Pro to an older MacBook Pro?

My MacBook Pro is in the shop and am using my older MacBook Pro in the meantime. I want to restore my older computer with the lastest backup from my newer computer, but I'm not able to see/access the backups from my newer computer - I can only see the backups from my old computer. Any suggestions?

That is probably due to the older computer being too old.
You can do a manual restore to a USB drive plugged into the computer. Then select the files you want.
See pondini Q14-17 on restore.
http://pondini.org/TM/FAQ.html
Particularly 16 and 17.
You tend to migrate from older to newer computer and OS.. and it is not going to work the other way around.

How can one do a full system restore from Time Machine to a Macbook Air

I recently had a major crash on my two internal disc DualG5. The system internal disk failed completely and I used Time Machine to do a full system restore to the second internal disc. It worked PERFECTLY!! I followed the instructions in support
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
This involved inserting the Leopard DVD into the optical drive and backing up from my external LaCie time machine backup.
I also have a MacBook Air. I use an external USB HD drive as Time Machine backup. The Air only has one USB port. I have an external DVD drive for the Air. Clearly, I will not be able to mount the DVD and External disk at the same time unless I use a small hub. I guess this will work but is there any other work around. Could I do a full reinstall and then connect the external HD?

Richard,
Alternatively, you could use Remote Disc Sharing (via the DualG5) to do the install and reserve the USB port for the Time Machine disk.
[http://support.apple.com/kb/HT1131]
[http://support.apple.com/kb/HT1777]
Let us know if this was helpful.
Cheers!

Disk Repair notified me it could not repair the HD. Iam to reformat the disk and restore backed up files. OS Utilities give me a "Restore From Time Machine Backup" option. I have not reformatted the disk; does this restore option do both?

Disk Repair reported that it could not repair the HD Disk. I am to reformat the disk and restore backed up files. OSX Utilities give me a choice of restoring from time machine backup (which I have on MyPassport) but no information on reformatting the disk, which I assume I have to do first. How do I reformat the HD ...or does the restore from Time Machine do both things?

Boot OS X Recovery and use Disk Utility.
If Disk Utility reported the disk cannot be repaired though, you should replace it with a new one.

HT201250 when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer

when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer?

That depends on how you do it.
By far the best, easiest, most reliable method is to use Setup Assistant when your shiny new Mac first starts up, to transfer your apps, users, data, etc. That doesn't disturb either the OS or basic Apple apps that came with the new Mac. See Using Setup Assistant on Mountain Lion or Lion.
There is a facility to restore an entire system from Time Machine backups, including the version of OSX on the backup, but that's for use when your internal HD has been erased or replaced only. It's not a good idea to restore the full backup of one Mac to a different one. Depending on the circumstances, the installer may not allow it. Even if it does, the Mac may not start up, or may kernel panic, or not work properly.

How can I copy a time machine backup from one Time Capsule to another ?

How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

from this support article:
(click on image to enlarge)

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

How to restore a Time machine backup and get a recovery partition?

Hi,
I'm quite confused!
I restored from a Time Machine backup and then setup boot camp (and removed that partition a while back) and now I don't have a recovery partition. (Can't enable File Vault and
bash-3.2# diskutil list /Volumes/Macintosh\ HD
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            87.4 GB    disk0s2
My new MacBook Pro didn't come with any CDs.
Apparently I need the recovery partition to reinstall Lion from the internet.
"Recovery HD offers on-disk recovery tools, allows you to restore from Time Machine backups, reinstall OS X Lion over the Internet..."
The recommended solution from Apple seems to be reinstall with your OSX 10.6 CD (which I don't have) and then upgrade to Lion (which seems like a PITA).
Info from : http://support.apple.com/kb/HT4649
What process should I follow to restore my recovery partition and apply the current state of the machine from a backup?
(the process should not involve anything I don't have, like USB memory sticks, Lion CDs, etc....)
Supplementary questions which are only relevant if the answer is "you can't" (which would seem to be a major bug!) :
Or is there a clever method to install a recovery partition onto an existing disk (which clearly has space for it)? I have searched for it but all the results I found have either not mentioned that it works without reinstalling but look like it's needed, or do say "reinstall".
If I install Lion to an external disk, can I boot from that and use the recovery disk assistant tool to restore the partition to my internal disk? (Which I assume I'll need to do to get FileVault to work) ?
Thanks,
Max

Maxs-MacBook-Pro:Applications max$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            87.4 GB    disk0s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *136.2 MB   disk2
   1:        Apple_partition_map                         30.7 KB    disk2s1
   2:         Apple_Driver_ATAPI                         2.0 KB     disk2s2
   3:                  Apple_HFS Recovery Disk Assistant 136.2 MB   disk2s3

Imac won't restore from time machine backup after HD (hard drive) recall replacement

I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.

I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on.

Can't restore from Time Machine backup error message

My hard drive on my Macbook failed a few days ago. Just makes a clanking noise and won't boot up etc... I installed a new drive, formatted it, and selected restore from Time Machine backup from the installer screen. It started restoring from my backup I had on an external drive and everything was fine untill it got about 6% done then get a message that says "An error occured when restoring from the backup" It is pretty non descriptive. It also says please restart your system and try again or something to that effect. I tried again, same problem. When I try to copy files over manually I eventually gets some error that says there is a problem with a file and it will quit. Any ideas on how to get my data? I can see all my files on there, but can't get them. My backup disc is just used for backup on this one machine nothing else, so it shouldn't have a problem. Help!

Good to hear MA is doing something!
>I have never had much luck with Time Machine...
Same here, not one good backup or restore, can't tell which.
You can set any of these to Clone/Update as often as you wish...
Carbon copy cloner...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/products/tribackup.html

Sooo... How does one restore a Time Machine backup to an Air?

Similar Messages

Maybe you are looking for