SOOOO, now I start all over after TWO HOURS! Heavy sigh. I've downlaoded now where is it?

I redeemed my 'card' I got my serial numbers, I downloaded, clicked open, clicked RUN, now where is it? I pray the program itself isn't as hard as the opening of it! I'm a Grami and not so techie. I need phone help. I have the premium - it SAYS I can talk to someone on the phone.

Did you have this page Terri?
 BLESSINGS! Praying my story gives God glory!Favor, Peace and Joy!
Caryl
A Little Lower Than the Angels  Volume OneHearts Stolen (1839-1844) Book Two Vow Unbroken (1832), the widely acclaimed Historical Christian 'western adventure' Texas Romance  Caryl's Website
      From: TerrieM <[email protected]>
To: Caryl McAdoo <[email protected]>
Sent: Tuesday, December 30, 2014 5:26 PM
Subject:  SOOOO, now I start all over after TWO HOURS! Heavy sigh. I've downlaoded now where is it?
SOOOO, now I start all over after TWO HOURS! Heavy sigh. I've downlaoded now where is it?
created by TerrieM in Photoshop Elements - View the full discussionIf you find a phone number please post it. I'm getting desperatefor help already.  f the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7054540#7054540 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7054540#7054540 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

  • Updated to Mavericks and the new version of iPhoto starts to install but just gets to 10.2MB and starts all over and then comes up with an error message

    I installed Mavericks to my computer and iPhoto isn’t working it has a grey no working symbol over it.  So I tried to download the new version of iPhoto but it starts to download and just gets to 10.2MB and starts all over after about 3 mins of doing this it comes up with an error message saying  an error had occurred.  I have tried downloading several times restarting the computer and downloading and still get the same thing over and over again.  Any help would be greatly appreciated! 

    Contact App Store support. There's a link on the right hand side of the App Store Window.

  • My Nano took a trip thru the washer and dryer and I assume it is destroyed.  My wife bought me a new one, but Itunes doesn't recognize it, although my computer does.  How do I get pack into my music, I don't want to start all over again?

    My Ipod Nano took a trip thru the washer and dryer and I assume it is destroyed. 
    My wife bought me a new one.  It shows up on  my computer (windows vista), but Itunes doesn't recognize it.
    How do I get Itunes to recognize it.  I spent a lot of time recording my old cassetes and don't want to start all over again.  I just want to get back to where I was.
    GGus

    Did you already try the troubleshooting here? iPod not appearing in iTunes

  • I recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

    i recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

    You can't gift it, gifting can only be done from within the store, not from within your library.
    Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • After an update to Mt.Lion, my iWeb was GONE, leaving me with my website on my host, but all my iWeb information on my computer was totally wiped out. I was able to load iWeb again, but I will have to start all over rebuilding my site...any suggestions?

    Has anyone else lost their entire iWeb information after upgrading to MT. Lion? I did manage to upload iWeb again, but it's like I've started all over with no data, so I will have to totally rebuild my site -if I ues iWeb-and upload the entier site again, and I have no guarantees that I won't lose it again.

    Did you do a clean install of Mt. Lion, i.e. an erase and install? If you didn't  do a clean instal check inside the User/Library/Applicatrion Support/iWeb folder to see if there's a file there named Domain.sites. 
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    If you don't have a backup strategy then this would be a good time to start one.  The simplest to start is to use Time Machine with an external HD that's at least 1.5 times the size of your boot drive.
    OT

  • I have totallymessed up outlook on my ipad, attempted to change password, and then couldn't send email and now can't access at all.  can i reload "clean" new version and start all over?

    i have totallymessed up outlook on my ipad, attempted to change password, and then couldn't send email and now can't access at all.  can i reload "clean" new version and start all over?

    Settings>Mail, contacts, calendars>Your email account name>Delete Account. A window will popu after you select your email account in the settings and there is a large red Delete Button at the bottom of the window.
    Settings>Mail, contacts, calendars>Add account. Tap on Add account and start entering your email account details again. If your email account doesn't fit one the per installed accounts in there, tap on Other - and add your account in there.
    I would restart the iPad after you delete the email account, just to be starting "fresh" again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button

  • After I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

    after I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

    Try removing and then reinstalling the Apple software using these instructions.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    The above containes a link for XP. Also. make sure you install the correct Apple software, It comes in 32 and 64 bit and you need the one that is the same as the computer OS

  • I updated my ipad from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over  again

    I updated my ipad 2from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over  again

    iCloud: Restore or set up your iOS device from iCloud
    Or from iTunes  http://www.iphonefaq.org/archives/971992

  • HT1414 i update my i phone 4s, After 400 MB Software Update it start all over agian WHY

    What is wrong in update & Restore System, My Phone is not updating . The Total file size is 930MB afetr 400MB it start all over again WHY, Please Confirm

    You do NOT want the update... It's a ***! Unless you prefer to lose all of what you type after pressing the space bar, time and time again. It's a <Deleted>. Wishing it hadn't come across my phone  --ever!
    <Post edited for profanity per the Verizon Wireless Terms of Service.>
    Message was edited by: Verizon Moderator

  • My daughter is locked out of her ipad...has been for months. we want to start using it now and are trying to disable it and start all over from scratch. what should we do?

    my daughter is locked out of her ipad. has been for months. we want to disable it and start all over from scratch.what do we do?

    Will the iPad power up by holding down on the power button until the Apple logo appears on the screen? If it does, try restoring using recovery mode.
    Recovery mode - Support - Apple

  • I cannot open project; do I start all over, or is there hope?

    So I have started doing video podcasts and am using iMovie '11 for editing the footage.
    I exported my first episode which turned out to be around 18 min total. When I watched it to verify, the audio started becoming out of sync with the video. It got progressively worse. Searching these forums and the Internet, I found other users were noticing the same problem. One workaround was to extract the audio from each and every clip. I tried this and it worked. The exported movie had no video/audio sync problems. So I thought that would be my workflow.
    Then I started working on my second episode. It turned out to be a long one clocking in at an hour and 45 min. It consisted of some complicated edits and a very large number of separate clips. I started my tedious workflow and workaround of extracting the audio from each and every clip so the exported movie would have video/audio in sync. The process got progressively slower and slower. At some point about halfway through, when I right clicked on an clip to extract the audio, the spinning beach ball came up and iMovie hung. I restarted and tried again, but the same result. When I restarted again, iMovie would not start. I can double click my first episode project and open it, but the second episode will not load; well, it will load sometimes, but if I do anything with it, including just moving the mouse, spinning beach ball and hung. Searching the Internet, I found recommendations to clear the cache and plist. This didn't help any for me. Sometimes, iMovie will hang when I simply select the project in my project library; sometimes, I can select the project and quickly get to the menus. I tried doing this and duplicating the project, but the duplicated project showed the same symptoms.
    Unfortunately, I did not keep backups and I don't know why I didn't with such a large project. I've learned my lesson.
    Question: Is there any hope of getting the project to a state where I can salvage it? Anyway to reattach the audio outside of iMovie or something?
    I also realize now that iMovie is probably not meant for such large, complex projects. But, the video/audio sync issue doesn't seem to be that hard to reproduce. I have submitted feedback for that.
    If I decide to continue using iMovie, I am going to add to my workflow that a project cannot be over x minutes long, export the parts, and combine them with Quicktime.
    Question: Are there recommended guidelines for a single project's complexity or length?
    I am hoping for some answers here; otherwise, I guess I'll have to start all over and spend the next two days re-editing.

    I have the exact same problem here Jason, only in my case the project is merely 15 mins long...
    I noticed the audio sync issues on exported files (needed it as a QT HD to play in front of a whole school assembly) about half way through the audio would go miles out - well over a minute adrift.
    Having read some posts I decided to detach the audio as you did, it let me do this for a while then about half way through I got the beach ball and likewise I'm now stuck with an urgent essential project that I can't do anything with. This is on a brand new 27" i7 iMac with all the updates, and no other projects. It's like the dark days of Pinnacle on windows, I thought this stuff was supposed to just work!
    Does anyone have any suggestions on a fix - I've repaired permissions, tried trashing the iMovie prefs etc but it still hangs every time.

  • When I only want to close the current window to return to the previous window, the whole firefox site closes down, I end up back at my desktop & have to start all over again. How can this be fixed?

    If I close a window I should be back at the previous window that I was at when I followed a link to this window. At least that's the way Internet Explorer works, which I have used for years. The only thing that prevents me from using Firefox exclusively is that it is very time consuming to have to start all over again from scratch every time I close a window. For instance, say I type "cats" into the search box. It gives me links to a list of "cats" sites. I go to a "cats" website, decide I don't like it so close the window to return to my list of sites, but instead of returning me to the list, I end up at my desktop. Then I have to start all over, just like I had not even been online. Very aggravating. I don't know how else to describe the problem, I can't believe that other people haven't had a similar complaint, unless I just have some settings wrong?

    Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
    Still works on Windows, and with other browsers... It would be great if a fix is available.

  • How do I get a clean start for catalog to start all over again?

    Running PSE5 on Win XP w/SP3
    I have not been able to get any information about how to recover a catalog from files that have been copied as a backup, so it looks like I'm forced to start all over again.  There are about 17000 images in the C: drive.  The images all seem to be OK.  A few days ago there was a properly operating catalog file (and all the others) there, too.
    Since then, I have tried to learn how to make the former catalog file operative, but no luck.  Since then, I have read that just uninstalling and reinstalling PSE5 will do nothing to give me a clean start - that is, all the old (now problematical) catalog file trouble will still be there.
    To start all over again seems like such a waste of time, since I have copies of all the catalog files as they were properly operating in March, but it seems that something important is missing and none of this stuff is useful in any way.  I'm not the PSE5 user, so I didn't know about the external catalog backup that can be done from within PSE5 - so the possibility to use that technique does not exist.  All I have is a straight copy of everything in the Documents and Settings.. ...Application Data\Adobe folder.  I've tried replacing the whole Adobe folder with the backup files, starting PSE5 and looking at the catalog, but that didn't work either. I just get the same old empty catalog.
    So, the 'start all over' option seems like the only way out.  Anyone who has lost the catalog knows how much work is in the catalog, so any help with either making the old catalog file work through reconstruction somehow, or starting all over again, will be very helpful.  Someday, I'd like to learn how this happened.  Until then I'll be backing up the catalog file from within PSE5 to an external location...  Everytime there's a new entry in the catalog information.  That method seems simple enough that even I could do it.
    Thanks,
    Al
    (K3PXR)

    I tried to open the resident 'My Catalog.psa' file.  PSE5 dutifully did that and the catalog information, such as tags and other information that would normally be present when looking at the Organizer is blank, as if nothing has ever been entered in the catalog.
    The 'My Catalog.psa' file is about 600K (according to windows explorer) and resides in the 'Catalogs' folder.  Also there are:
    My Catalog-2.psa  about 3252K
    My Catalog-2.psa about 5380K
    In the folder: 'Catalog Folders' were the folders:
    My Catalog
    My Catalog-1
    In the folder My Catalog are the files:
      backupCt.dat  1K
      collstatus.dat  1K
      tagstatus.dat  1K
      thumb.5.cache  10K
    In the folder My Catalog-1 is the file:
      tn.4.cache  32394 K
    Above I say 'In the folder, Catalog Folders, were the folders My Catalog and My Catalog-1' because last night when shutting down, I didn't know what was in those folders.  I was too tired to check.
    I did copy everything that was in the Adobe folder and all associated sub folders, including the folders above, to an SD flash card before I started to do anything else.  Becasue of this, I should be able to get back to the way it was before I started to do anything, then I opened the catalog file My Catalog-1.psa.  It said that it was made from an earlier version, asked to convert it and contained the 2002 to 2004 catalog information.  To the best of my knowledge, those photos were never entered in PSE5, and probably were from an earlier version of PS Album. 
    So, where is the information that was once in the PSE5 catalog?  Which files should contain that information?  Why can't the files simply be copied from the backup copies back on to the C:\ drive in the proper folders and then upon starting PSE5 see at least the catalog that was present when the copies of the files in the folders above were made?  What dumb mistakes could have been made to overwrite the information in the catalog and make the catalog appear empty?  If I don't learn this, I'll not be able to prevent it from happening again.
    I'm not on the machine with the trouble at the moment, and since it is not my machine, I sometimes have trouble getting to it during normal waking hours.  I don't know the exact clicks and keystrokes that got the catalog from its normal function to appearing and functioning as if it is empty..
    What exactly are the symptoms of "PSE5 doesn't like..."?  The catalog appears and functions as if it is empty - as if nothing ever has been or ever was entered into it.  PSE5 Organizer is operating normally as far as I can tell.  I cannot seem to locate the former catalog information and it has not loaded the former catalog file information.  A new test catalog was made and it opens and shows the thumbnails of its four images.  I hope that the test catalog I made didn't overwrite anything that would prevent going back to the original catalog information.  The copies of the files can be restored as they were a few months ago, though, because there is a copy of them on an SD card.
    Thanks,
    Al
    (K3PXR)

  • HOW CAN I START ALL OVER WITH iCHAT???

    this is my 1st macbook. it is a refurbished laptop. it has snow leopard. i tried to set up an ichat account but it didnt complete the process. can i just start all over again??? with a new name, password, everything??? (for ichat)? i cant remember the name or password i used. help!

    Hi,
    iChat 6 in Lion adds the ability to use Yahoo accounts in addition to AIM (valid) names and Jabber IDs and you have not told which you are adding.
    The error message does sounds bit like the AIM one.
    iChat (And the Messages app in Mountain Lion) can use Apple IDs that end in @mac.com and @me.com
    However you must keep the passwords to 16 characters or below as this is the AIM server limit.
    8:49 PM      Sunday; November 4, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT204406 my itunes match keeps starting by itself.. gets to the third and final step (artwork) then starts all over again. it does this all by itself. itunes even opens by itself to do this. help!

    my itunes match keeps starting by itself.. gets to the third and final step (artwork) then starts all over again. it does this all by itself. itunes even opens by itself to do this. help!

    how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...

Maybe you are looking for

  • How do i change my Itunes payment method from Visa to None..?

    Ok..so I originally had my credit card on there, but when it got maxed out, I changed it to a prepaid Visa card that I got for Christmas. The Visa card is now maxed, and my credit card is still maxed, and apple won't show 'NONE' as a payment option.

  • How to configure custom error page in WebServer 6.1 if instance is down

    Hi , I have deployed an application on port 82. If the instance is down, want to configure custom error page in Sun One Webserver 6.1 so that the it displays a customised message rather than browser displaying its custom DNS error page. In web.xml, c

  • RMI Problem with rebind()

    created files as below. All compiled successfully. ran <rmic -v1.1 -d %cp% -classpath %cp% server.TempServerImpl> from command window. this generated a stub file called TempServerImpl_Stub.class I launched the rmiRegistry To make the remote object av

  • SSH Tunnel to other SSH servers?

    I'm not sure how this can be done, with or even without an SSH tunnel. Here's my scenario: PowerBook@Work --> Firewall --> INTERNET --> Linksys Router/Firewall with port forwarding to Mac mini home server --> Mac mini --> Other Mac clients Obviously

  • How to restrict Goods Reciept before Confirmation

    Greetings..               How to restrict Goods receipt (MB31,Movnt type 101) before Porduction Order Confirmation in CO11. Right now if i do GR without confirmation, system allowed this. How to restrct it .