SORT Not merging similar fields if there are any editable fields in the ALV

Hi All,
I have two issues with my OOPS ALV report.
1) Standard sort is not working :
Output of the report looks like this
WBS    TEXT          Period 1  Period 2
A           Total hours     1         1
A           Total hours     1         1 
A           Total COSt     1         1
A          Total COST     1         1
My agenda is to calculate sub total of period1 and period 2 based on fields WBS and TEXT, my output should look like
WBS    TEXT          Period 1  Period 2
A          Total hours         1           1
                                     1           1
Total hours                     2           2 ( Sub total )
A          Total COST        1         1
                                     1         1
Total COST                    2         2 ( Sub total )
To achieve this i pass these two fields in the sort table and pass field subtot = 'X' for TEXT field.
It is working fine, i am getting the sub totals but the WBS field are not grouped( Even though it is a standard functionality).
my output looks like
WBS    TEXT          Period 1  Period 2
A         Total hours   1         1
A         Total hours   1         1
Total hours               2         2 ( Sub total )
A      Total COST      1         1
A      Total COST      1         1
Total COST              2         2 ( Sub total )
I have few editable fields in my output, i came to know this issue is because of the editable fields. have anybody come across the same error.
Please let me know how to achieve the standard sort ( Merging similar values ) functionality even if the output has editable fields.
2) IS it possible to get two Grand total based on a field value . In my example , my TEXT field will always have value either  'Total hours' or 'Total COST'
my output should look like this.
WBS    TEXT          Period 1  Period 2
A      Total hours     1         1
                              1         1
Total hours(A)          2         2 ( Sub total )
A      Total COST     1         1
                              1         1
Total COST(A)         2         2 ( Sub total )
B      Total hours      1         1
                              1         1
Total hours(B)          2         2 ( Sub total )
B      Total COST      1         1
                                1         1
Total COST(B)           2         2 ( Sub total )
GRAND TOTAL HOURS    4         4
GRAND TOTAL COST       4         4.
Response will be appreciated.
Thanks & Regards,
Rajanidhi Rajasekeran
Edited by: Julius Bussche on Jul 14, 2008 7:39 PM

Hi
If I make  the editable field to non editable then sort & cell merge is happening but if I make any of the field as editable then merge is not working shall i request you the solution
Regards-Sreeni

Similar Messages

  • I would like to know if there are any classes in using the iphone in the South Bay area (around Torrance) of Los Angeles County?

    I would like to know if there are any classes in using the iphone in the South Bay area (around Torrance) of Los Angeles County?

    Apple stores have classes, look online for the Apple store closest to you & their schedules. Here's Apple's free iPhone app to do so right on your phone:
    http://itunes.apple.com/us/app/apple-store/id375380948?mt=8

  • HT2506 I use Preview to edit photos, and would like to know if there are any Preview updates in the works. I find there is a problem with Preview crashing, or taking a very long time to "catch up" (spinning beachball of death) while I'm editing.

    I use Preview to edit photos, and would like to know if there are any updates to this program in the works. It seems Apple is constantly updating its software, except for Preview. I find it crashes all too often, and also takes forever to "catch up" with me (as in spinning beachball of death) when I'm editing a lrge amount of photos. Yes, I know I should be using Photoshop or somesuch, but it's just too **** confusing, and I don't have the time to figure it out. Thanks!!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Issue while generating MD5 if there are any special characters in the CLOB

    Hi Guys,
    I need your help...
    We are using dbms_crypto.hash to generate the MD5 hash value for a CLOB that will be sent to other feeder systems. The feeder systems validate the file by generating the MD5 hash value on their end and compare with the MD5 generated in Oracle and accept the file only if the MD5 hash value matches.
    The MD5 file matches between both the systems except in the case where there are special characters in the CLOB. Somehow, MD5 is prefixing  character before any special character and calculating the MD5 value. In our case, our special characters being ®, §, ™, ©....
    This is a high priority issue for us and it is holding our UAT.
    We are using Oracle 11.2.0.2.0.
    Your response is really appreciated.
    Best Regards
    Gupta

    Welcome to the forum!
    Whenever you post provide your 4 digit Oracle version.
    >
    We are using dbms_crypto.hash to generate the MD5 hash value for a CLOB that will be sent to other feeder systems. The feeder systems validate the file by generating the MD5 hash value on their end and compare with the MD5 generated in Oracle and accept the file only if the MD5 hash value matches.
    The MD5 file matches between both the systems except in the case where there are special characters in the CLOB. Somehow, MD5 is prefixing  character before any special character and calculating the MD5 value. In our case, our special characters being ®, §, ™, ©....
    >
    See if my reply in this thread addresses your problem.
    Re: MD5 HASH computed from DBMS_CRYPTO does not match .NET MD5
    The fix in almost all of these cases is to understand that the Crypto package always converts everything to AL32UTF8 before hashing.
    ALWAYS.
    ALWAYS.
    ALWAYS.
    Unless the 'other' hash generators (substitute any generator you wish) do it the Oracle way you will NEVER get a match.
    NEVER.
    NEVER.
    NEVER.
    There are no workarounds.

  • Layer Comps To Files - Export error: Could not complete this operation. There are no user slices

    I have been using the Export Layer Comps To Files scrips that ships with Adobe Photoshop CS5 for a while and found it very useful, apart from the numbers it automatically adds as a prefix to the layercomp name.
    A friend pointed me in the direction of a altered version of this scrips which removes the numbers and only exports the layer comp name, gerat I thought. Not great! After using this successfully for a while the scrip started to throw up errors whenever I attempted to export. Either "No layer comps found" or "Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices." As I knew there were layercomps for the first error and knew that I had not created any slices for the second error I was pretty miffed. Fortunately I had the foresight to make a copy of the original script from the Photoshop presets library.
    I have since deleted the offending script out of my presets folder and copied the original script back in however the error still persists. I constantly receive Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices. I have searched the forums and around the net to try and find a solution for this problem but none seem to present themselves. I am perplex how this error can persist when the original script is now being used.
    If there's is anyone out there who can help me resolve this I'd be most grateful. As I say I've tried to resolve this myself and am pretty computer savvy but this one has defeated me
    Thanks in advance

    The problem seems to be already solved, but I'm commenting this for future reference.
    This has happened to me too and I think I know what causes it.
    It happens when you...
    1) Do "Save for Web" with the "All User Slices" selected in the dropdown menu "Slices".
    (This can only be done with a file that has a user slice)
    2) Then try to use the "Layer Comp to Files" script to a file that doesn't have any slices.
    To avoid this you need to once open a file that "has" a user slice and save with
    the "All Slices" option in the "Slices" menu and then go back to the file you want
    to run the script to.
    When you run the script, the saved "Slices" option from the previous export seems to
    be used and causes an error when there are no user slice.
    I also found a fix to the script to avoid this error to come out.
    This can be also applied to the fix to "remove the numbers" added to the head of the
    exported file names.
    The number removal script goes something like this...
    var fileNameBody = exportInfo.fileNamePrefix;
    if (fileNameBody != "") fileNameBody += "_";
    fileNameBody += compRef.name;
    this should replace the "Layer Comps to Files.jsx" lines 188-190.
    In addition to that, the script below needs to be added below line 818 and line 863.
    (This line numbers are those before any alterations to the "Layer Comps to Files.jsx" script)
    var idSWsl = charIDToTypeID( "SWsl" );
    var idSTsl = charIDToTypeID( "STsl" );
    var idSLAl = charIDToTypeID( "SLAl" );
    desc4.putEnumerated( idSWsl, idSTsl, idSLAl );
    The line right above where the above script should be inserted should read as the following...
    desc4.putPath( id44, new File( exportInfo.destination + "/" + fileNameBody + ".png") );
    Actually it can be added any where after the "desc4" variable is declared but I specified just
    to make it simple.
    This sets the "Save for Web" "Slices" settings to "All User Slices".

  • Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

    Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
    Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

    Hi Elba,
    Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
    I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
    I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
    The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
    If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
    Completely baffled by it. Any idea what could be the reason?
    Kind regards,
    Nik

  • The music on my iPhone 4 with the new ios7 is not working. There are red  dots next to the selections and I can  not here any music when I touch the  spots. I just downloaded the iOS 7. What went wrong?  Everything else seems to be fine

    The music on my iPhone 4 is not working. There are red dots next to the selections and no sound occurs when they are touched.

    Can you play those songs in iTunes on your computer?
    Make sure they are all part of your iTunes library before you sync and that they were bought with the same AppleID you use on your phone.

  • Photoshop CS5.1 Extended: Could not complete your request because there are too many Files Open

    I saved a file last night and now this morning I get an error message stating: "Photoshop CS5.1 Extended: Could not complete your request because there are too many Files Open. Try closing some windows and try again.". I've rebooted the system and made sure Photoshop was the only program running and that there were no other files open prior to trying to open my file. I increased Photoshops ram usage, checked the OpenGL settings, 3D and VRAM settings, cleared my temp files and am at a loss for opening this file.
    System Specs:
    Win 7 64
    6 core I7 processor
    32gb Ram
    3GB VRAM
    600gb free space on 7200 rpm drive
    File specs:
    1 3D object replicated maybe 5 times (yes, I should have rasterized them, and will do that to 4 of them if I get the file open)
    Maybe 8 textures
    Not sure how many total layers.
    Is there anyway to get Photoshop to reopen this file?

    No, more VRAM is useless. I had the same thought as you so I tried with a friend's computer with 3GB of VRAM for 8GB RAM (mine has 1GB VRAM for 16GB RAM). Still got the same error message. Sorry guys but our files are lost until Adobe fix the error in Photoshop code. I hope in the future they will find a way to either fix this error or give a clear limitation, it is really a shame such a dangerous problem exists and persists for more than 3 photoshop gen.
    Still you may be able to have at least a flat image of your latest file by trying to open the file as smart object. I started my work over by doing that. Not a lot but better than nothing.
    However for my new file I am trying something different : Each time I think a 3D file is final, I do not rasterize it but make it into a smart object and save the new smart object into a single separated .psd file. If any change is needed I can still edit all of my 3D objects by opening them separately. So far it works, the global file is lighter with few to no 3D objects inside but I will not say it is a 100% no-risk method yet.
    Last advice I can give everyone : Before closing the file you are working on, save it as a copy (File / Save as... and check 'As copy' in the options below) then with your main file still open, try to open the copy. You may need a lot of memory if your file is heavy but still if the dreaded error message appears when you try to open the copy then remove or rasterize some 3D objects in your main one. Save again as copy and try to open the copy until you do not get the message anymore.

  • HT4914 Can I use iTunes match if I am not sure whether there are any pirated songs in my library

    Can I use iTunes match if I am not sure whether there are any pirated songs in my library

    iTunes match should work for that. I am assuming your friend gave you some music from a flash drive, and yor not sure if he/sh pirided it or not, and this is understandible. this screen shot should help. I also sugest looking into google play, which is not as convienet as far as combining with iTunes, but is free I bleive.

  • Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

    Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
    It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

    The easiest thing to start with is to reset the Eraser Tool.
    Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

  • I have not been able to use facetime on my iPhone 5 and my daughters iPod 5 since yesterday. Does anyone know if there are any problems with apple?

    I have not been able to use facetime on my iphone 5 and my daughtes ipod 5 since yesterday...does anyone know if there are any issues with apple?

    As these are user to user support forums, there will be no official response from Apple posted here. 
    Basic forum ettiquette is search before posting, so why post again if you've already searched?  Seems rather unintelligent.

  • Hi my wife uses micro soft office to do her wedding stationery etc and we have recently bought an iMac.can anyone tell us if there are any similar or better programs for a mac

    Hi my wife uses micro soft office to do her stationery for weddings etc. We have recently bought an imac and was wondering if there are any similar or better programs out there for a mac.thanks

    John Galt wrote:
    In no particular order,
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for over a year now. Life is better without Microsoft.
    Just an FYI John, NeoOffice is no longer free, (but it is cheap at least)

  • Lightroom 5 is not showing previous sucessfuly imported images and images are not identified as missing, there are no images shown in the library, how do  I reconnect missing images?

    lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do  I reconnect missing images?

    If the images are not identified as missing ... then you can't reconnect them
    But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail...

  • I want to cancel my account. I purchased a product that had errors in it. Within minutes I tried to cancel the purchase, and Acrobat will not let me. Furthermore, there are security errors in my account that are unacceptable. Please cancel my account, my

    I want to cancel my account. I purchased a product that had errors in it. Within minutes I tried to cancel the purchase, and Acrobat will not let me. Furthermore, there are security errors in my account that are unacceptable. Please cancel my account, my payments. I have called my bank and reported this as fraud.

    Kmrnyu, the order placed by you is still under transaction,  the order stands canceled.
    As soon as the order is complete I shall get it canceled & refunded.
    Regarding the account, do you want it to cancel the account? Please confirm.
    Regards
    Rajshree

  • Firefox will not remember passwords even tho the box is checked and there are no exceptions listed. The little bar asking to save passwords doesn't even come up.

    After an online session, Firefox (6.0.1) crashed and a crash report was sent. After that, Firefox would not start and the crash window kept coming up. I uninstalled it and did a new install. It works fine now except it will not remember passwords even tho the box to save is checked and there are no exceptions listed. The bar asking to save does not come up.

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

Maybe you are looking for

  • Problem displaying CLOB in text file

    Hello All, I have a problem displaying the content from the database in notepad. When I click on a link on my jsf screen, I retrieve the data and display it in notepad. I have my text content stored in the database with CLOB datatype. When I look in

  • Showing documents from third party DMS

    Hi All, We have a requirement where we want to show the documents in EP from a third party DMS. Can anyone guide how to proceed on that? Regards, Piyush

  • How do  connect tv to my router

    how do i connet my tv to my router

  • Platform Migration During EBS upgrade

    Hi , We are planing to upgrade oracle apps from 11.5.10.2 to R12.1.3. Currently Both oracle apps(11i) and DB(11gR1) are on IBM-AIX 5.3. also planing for OS migration from AIX 5.3 to Linux x86-64. So what would be the better option : 1. Migrate existi

  • Which is the last update for photoshop cs6?

    Hi i run cs6 under w7 32bit and i have updated to 13.0.1 but here  http://www.adobe.com/support/downloads/detail.jsp?ftpID=5408       there is  Adobe Photoshop 13.0.1.1 update for Adobe Photoshop CS6 and if i go under help and updates....  it doesn't