Sound card doesn't work properly (HDA intel)

I had a fresh install and now i have this problems:
@ Starting volwheel i get "volume: can't open /dev/mixer "
@ I can not play two or more media to gather. if i play more than one media to gather the second one and the one after plays in mute. only the first one has the sound.
@ alsaconf doesn't found any sound card.
->> the more information about my sound card
lsof /dev/snd/*
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /root/.gvfs
Output information may be incomplete.
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
vlc 25922 amin mem CHR 116,3 5495 /dev/snd/pcmC0D0p
vlc 25922 amin 13u CHR 116,3 0t0 5495 /dev/snd/pcmC0D0p
fuser /dev/snd/*
/dev/snd/pcmC0D0p: 25922m
8086293e Yes Intel Corporation 82801I (ICH9 Family) HD Audio Controller snd-hda-intel (appropriate driver)
and I also installed alsa-oss b ut i removed it.
I need help.
Last edited by krax (2011-08-30 13:28:48)

"volume: can't open /dev/mixer " is for the users who use OSS so there; you should find out what uses OSS and change it if it is possible and not solely on oss.
and the error I am having is because I defined the specific software to hwd:0,0. so what i should do is to check my softwares and set the audio output to "default"
So in another word use you sound card and in output option of your sound card choose "default over hwd:0,0"

Similar Messages

I cannot get any sound..it says my sound card is not working properly...how do i fix this.

HP PC 2000 notebook, windows 7 operating system
can't get any sound..says the sound card is not working..how can i fix this...

You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Audio capture (recording) from sound card doesn't work

I have a Asus Xonar DS sound card that uses CMI8788 chip, AV200 kernel driver and snd-virtuoso kernel module. The card is recognised on installation (i686) and there are no issues with the sound output.
This is a new installation to try to fix the (lack of) recording problem. I know the card can be used to capture sound being played from a web browser, Youtube and internet radio, as I previously had it working with audacity, gnome-recorder and mhwaveedit, but some months ago, after an upgrade it stopped working.
Alsamixer shows the card as AV200 and I have toggled all the capture options and raised levels to no avail.
The card is not broken as the capture works fine on Kubuntu and even Win7. I have tried pasting asound.state from Kubuntu but there was no diference.
Does anybody know a good troubleshooting guide that deals with the capture side, not output.

"volume: can't open /dev/mixer " is for the users who use OSS so there; you should find out what uses OSS and change it if it is possible and not solely on oss.
and the error I am having is because I defined the specific software to hwd:0,0. so what i should do is to check my softwares and set the audio output to "default"
So in another word use you sound card and in output option of your sound card choose "default over hwd:0,0"

HP Pavilion dv8210us sound card doesn't work.

Computer p/n ET831UA#ABA came with WIN XP Home Edition. Label states designed for Windows XP, Windows Vista Capable. I formatted the harddrive and loaded Windows Vista Business 64 bit. I downloaded and installed all drivers that were recommended by HP but my Sound and Audio doesn't work. Neither does my Mass Storage Controller nor my PCI Modem. All were working with the WIN XP. Need help on how to getting everything working.
This question was solved.
View Solution.

You're very welcome.
You enjoy the rest of your weekend too!

HP Probook 4520s: sound card doesn't work (no sound, red mute button)

Нello!
I have an issue with my HP Probook 4520s. Its internal speakers and microphone doesn't work. I've tried to install and reinstall drivers from here, tried to rollback driver to older version but I always have the same result: installed the IDT sound codec, and after a restart, the mute button turned red and I cannot switch it.
Soundcard device ID: HDAUDIO\FUNK_01&VEN_111&DEV_7605
OS: Windows 7 Professional x86
How can I fix it?

Hi, just registered to post my solution. I got HP ProBook 4330s in for repair. Problem: some sticky liquid spilled all over and no sound. Also discovered that no microphone as well, but webcam did work just fine.
What I tried:
1) Installed fresh Win 7 Ultimate 32-bit and all official drivers (audio driver did not want to install), still no sound. Sound icon shows red cross. Message: No audio output device installed.
1) Installed the newest version of BIOS, in my case F.40, still no sound.
2) Pluged in headphones, still no sound.
3) Took apart, unpluged and firmly inserted every possbile cable, still no sound.
4) Found in BIOS everything that relates to Audio. Made sure Audio device is enable, still no sound.
5) Install XP and installed XP sound driver, still no sound. In fact, that driver did not install correctly, showed some kind of error.
What did work, in consecutive order:
1) Took apart again and took out the coin battery that retains the BIOS data, date, clock etc.
2) Put everything back together, switched on, entered the correct date in BIOS settings, and started Win 7 Ultimate. Still no sound. But I noticed that Win 7 Ultimate has found some devices and was installing drivers for it. Though did not check exactly which ones.
3) If I could not get the sound working I was determined to buy some speakers with USB connection. Then, I remembered that I already had a set of speakers for another laptop. These speakers had USB connection to draw power from and a grean standard headphone connection/plug to draw audio signal. I plugged in these speakers into HP 4330s and the sound started coming from these external speakers. The sound icon next to the clock in bottom right corner switched to normal mode and I could control volume with my mouse. Then I unpluged external USB speakers and the sound started coming from the HP's built in speakers.
Checked with Device Manager that correct sound drivers are installed and microhpone appeared to be installed as well. Though did not check with Skype if microhpone was working.
I was soooo happy!!! I struggled with this problem for three long days, searched many forums (none gave solution), tried everything with drivers, took apart the laptop some three or four times (now I learned to do it with my eyes closed, so to speak).
I started to think that taking out the BIOS/date coin battery did the trick. There must be some glitch in BIOS to motherboard connection in these HP ProBook laptops, and all BIOS settings need to be reset.
I'll be happy if this helps someone.

Automatic update to Tiger and now MBP sound card is not working properly?

A month ago there was an automatic Mac Book Pro OS update to the Tiger OS and since then the sound card on my MBP is popping and clicking during all music playback using the Sibelius music software program. All of my music composition friends (who use MBP and Apple computers) had the same experience at the same time...problems (popping and clicking) began right after a particular OS automatic update. Does anyone else have this problem or have a solution to this Sibelius music playback problem with a recent Mac OS automatic update?

Welcome to the forums!
Yes there are other posts here recently about noise along with some Audio APPs, there might even have been a cure, but I'm on Dial-up & just getting off work, but thought I could give you a hint about searching for it.

Is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

Trouble with the PS CC2014 3D Effects - Intel HD Graphics 3000 that doesn't work properly?

I Have a MBP 13 inch 2.8 GHz Intel Core i7 late 2011 and I'm Having trouble with the PS CC2014 3D Effects crashing when trying to apply a New 3D extrusion, are there any solution regarding the Intel HD Graphics 3000 that doesn't work properly?
Thanks!

Look at this document. It should help you troubleshoot and it suggests settings to try out.
Photoshop CC and CC 2014 GPU FAQ
While the stock advice for Windows users is to go to the Intel site for updates, Mac users can only get their drivers in the Mac OSX system updates. So you need to be sure your OS is up to date. If you have an earlier version, like 10.7 or 10.8, it is possible an upgrade to 10.9 might help.

Satellite P500-127: microphone or sound doesn't work properly using skype

Hi Toshiba team,
Recently bought a new notebook.
However the microphone or sound driver (connexant pebble high definition ) doesn't work properly when using skype. Also read about this matter in various forums such as the skype forum.
People encountered similar problems such as:
We can usually talk for a bit longer than 20 seconds, however the call will drop at a random time between 1 and 15 minutes. The strange part is that sometimes the quality of the call is good, but more than often my friend can only hear *half of what I am saying* while I usually do not have a problem hearing what has been said. The video will work so my friend can see me talking but can simply not really hear what I am saying.
Before the drop the call will usually freeze for a couple of seconds and then skype sometimes crashes. We have tried talking together without the video, however the problem remains.
I also found a suggestion by the toshiba service, just to simply increase the volume under control panel etc, but it doesn't work either..
Can you please help me on this one?
Cannot use skype at all as it just to annoying for everyone I talk to.. Quality is just to poor!!
Many many thanks
+Message was edited: link has been removed - not allowed+

Hi
Every day I use Skype with the internal webcam, microphone and speakers but I didnt have any problems as yet.
In your case I would try updating the drivers. Therefore download the latest sound and webcam driver (microphone is a part of webcam). Both you can get here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If your friend cant hear you, check also the settings for internal microphone. I have activated microphone boost in Windows sound settings so I could improve the microphone quality.
By the way: Do you use the latest version of Skype? With older Skype version I had also some problems on Windows 7. As far as I know only newest version is fully Windows 7 compatible.

Dreamweaver 8 doesn t work properly on imac intel "17"

Hello guys need some help, I m new to mac and I´ve installed dreamweaver 8 but it doesn t work properly. Instead of the insert toolbar I get boxes with a '?' plus in some occasion when I want to save a work instead of the usual " save or ok or discard" the button appears as " undefined". Can anyone help please?
Here is a picture of the error I get. Regards
http://flickr.com/photos/37586542@N00/
imac 17 intel duo Mac OS X (10.4.6)

It would appear to me when you installed Dreamweaver,
some image files got misplaced or lost by mistake.
Did you ever go and search for images and start
erasing images you didn't know what they came from?
If you did, then those may be the image. Those
images are little modular pieces that Dreamweaver
uses to display information on the screen.
I would install Dreamweaver from scratch and make
sure it is in the Applications folder.
Hi, did everything posible, I even downloaded a evaluation version, just in case but it seems it s only me who has this problem, I problaby need to download somekind of firmware or java but don t know which. Cheers

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Frontpanel of X-Fi Fatal1ty doesn't work properly

Hi!
My frontpanel doesn't work as it should. It doesn't has any functionality on one of the three buttons. And volumecontrol also does not work there. Neither with original drivers from creative nor with Daniel K.
Do you have any suggestions? I am running Vista 64 SP2.

Re: Frontpanel of X-Fi Fatalty doesn't work properly Yes this is what happens with those Front panels/ i-o bays. Sometimes when installing them, people turn the IDE cable that connects the card to the bay the opposite way that it should be. PIN on the bay should go to pin on the sound card, but people reverse that and sometimes the bay partially works. Other times, people do not plug a floppy power connector into their machine, and again, part of the bay works, and part of it doesnt. Please check these connections on both the "IDE style of cable" and your power connector doing to your I/O baby.
Message Edited by jmacguire on 06-7-2009 02:08 PM

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

Wifi driver doesn't work properly

HI,I've installed W8.1 instead of W7 but Wifi Dosen't work as a reight Way The Wi-Fi works for then depends on the work and then worked for againe
this affects my Job if i download anything,it stop loading continuesly.
I've tried W8 and the same problem but it works truely with w7.
what should i do for making it works truely with W8.1.
Sorry length of e-mail.

vn7571g_user,
Sorry to hear that you are not having the best possible experience with your new notebook. I'd like to try and address a few of your concerns that you have listed and see if there are some things we can resolve for you.
1. Wifi doesn't work properly:
I see that you have posted in a couple other threads (1st, 2nd) regarding wireless issues with this notebook. We can gladly check this unit at the repair depot for you if you are not keen on changing the card out, PM me the following information and I will see what I can do for you:
SNID or serial number
Contact name
Contact number
Email address
Shipping address
Purchase date
2. Wifi doesn't work after switching on and off 'Airplane mode'
If you have already tried to install/update the drivers, it could be a Windows issue. You can attempt a refresh to see if that helps resolve it.
3. Trackpad response is terrible
This notebook uses a precision touchpad possibly, but since it uses Synaptics drivers you have a couple options:
You can change the way that the touchpad works.
It says Windows 7, but you can see if you have this option in the touchpad settings and see if it helps you out.
4. Speakers jar
Do you have the same issue without the Dolby turned on?
5. Num-Lock is 'Off' after every sleep session
Here is a Microsoft article that discusses this feature. You can follow the steps that they list if you would like.
6. Keyboard-backlight setting is 'On' after every sleep session
The backlit keyboard is working as designed. Here is an article with some FAQ about the backlit keyboard to help customers understand its functionality a bit more.
A couple final thoughts:
Did the issue(s) you are having occur before or after Windows updates, sometime a bad installation of an update can cause all sorts of things to happen.
Worst case, you can always try to restore to factory defaults and test all these things before applying updates or installing any applications or programs.

Sound card doesn't work properly (HDA intel)

Similar Messages

Maybe you are looking for