Sound problems with K7N420 pro

Hello
I have a mainboard K7N420pro with windows 98 SE, I installed every drivers, and I can't hear any sound. I tried to reinstall windows with no external peripherical and the the result is same. In fact I can hear sound very low, when I turn up my amplifier to the maximum...
Does anybody knows the solution to this problem ?
Thanks in advance
JU

Did you read the hints from nVidia concerning 98se?
What about the audio jumpers? in the manual..
You pluged into the right hole?
installing nForce Core drivers on win98se
Installing the Audio Drivers
Use the following procedure to install nForce Audio drivers:
1. Extract the Audio driver package to a temporary location.
Use the drivers from Audio Driver package to enumerate all unknown media
class devices.
2. Go to the Device Manager (STARTØCONTROL PANELØSYSTEMØDEVICE MANAGER).
3. Look for the following devices:
Unknown Drivers
- NVIDIA Audio Codec Interface
- NVIDIA Media Controller Processor
Sound, Video, and Game Controllers
- NVIDIA nForce Audio Codec Interface
- NVIDIA nForce MCP Audio Processing Unit
Note: Various nForce Audio items Under Sound, Video and Game
Controllers will be replaced when the System Devices are updated.
4. Update the drivers using the ones saved into the temporary location in
step 1.
5. Restart your system.
No sound, sucks!

Similar Messages

Problems with K7N420 Pro

I'm writing to this forum to seek your advice. I am experiencing the BSOD and BKSOD problems.
My Hardware
MSI-6373 (K7N420 Pro) Mainboard
Aopen 300w Power supply
Duron 600 (spitfire)
2x Nanja 256mb DDR PC 2100 memory
CNR riser card
WD 60gig 7200rpm HDD
PCI Ultra DMA ATA/100 controller card
Liteon LT24102B writer
Liteon 52x cd-rom
Pioneer 16x DVDrom
MS optical USB mouse
LITEON 15inch monitor (1555NEL)
SOFTWARE
Windows XP
every nforce board driver could find
every video driver could find
(ranging from windows driver 5.1 from MS to the latest 41.03 from Nvidia)
even the motherboard cd drivers (as a note have installed other drivers after these to see if the later drivers incorrectly set a registry setting or something)
* Reinstalled Windows from scratch between driver installation if problem still occured
SOME FACTS
I have had bios 2.2 to 2.7 and currently using 2.7
I have tried the components above as a bare bones system, as a full blown system, and every combination in between.
Have have windows 2000 and XP, as well as WinME.
Swapped memory to test compatability.
Also for testing have tried Gforce 2 (brand not remembered) MX-200 with 64mb
Disabled Onboard Audio, Video and LAN seperately and together and combinations.
Could gaurantee pc to BSOD whenever It wanted to. Still does. Do believe certain combination of drivers/BIOS affect the stability.
PIO mode problem with ltr24102b if using ATA card, but not in a different machine.
SYMPTOMS
BSOD - During gameplay (NOLF2 Demo, Dungeon Keeper 1 unpatched, Diablo2 and Lord of Destruction as examples, not just the latest games)
One of the BSOD errors was IRQ not equal thing, another was it thought my agp card was a cause and shut me down. NV4disp. Have tried multiple detonator drivers
BkSOD - During Dungeon keeper 1 it black screned me.
During installation of windows XP I have been getting BSOD errors. This was when reset the BIOS to default.
Note: bios 2.2 default did not allow HDD smart to be enable, or it would not even make my monitor light go green, had to reset bios (power off thing)
Even get BSOD errors with not playing games. For example moving files from 1 directory to another, etc
CONCLUSION
As a father with 6 childen and a very limited budget, all my compute componets were purchased through frugal saving, buying secondhand (from people who looked after their hardware), and from money from presents.
Apparently Nvidia are going to release board drivers to help with the problem.
I do not have internet access at home as It is a luxury, and this means to access drivers/etc I have to pay at access points, or ask a friend a favour.
This has been ongoing since date of purchase, and am really sick of it.
Have read to forums and until now have not stated my problems.
In my opinion it is not about people who have a working nforce, but about the ones who don't!
The customer may not be king, but they should feel like they are.
I bought an MSI board based upon reliability, strength and performance, which I hope is true! MSI, take notice of me. I am just a user of your hardware who wants it to work.
Craig

Well, I realise your post was a statement of fact not a request for help 8o or maybe it was, but I missed the asking bit )
Have you considered seeking a RMA for the board???, as a person on limited means you sure have a lot of things stuck on the mobo, not to mention I can't really see when you have a video card attached or not - still as I say your 'statement' will more than likely be read by MSI altthough to be certain they get your message I'd suggest you email them.
Not many here have things like 3 optical drives and 'marginal PSU' but then again I would find it hard to pick if you suffered from brown outs due to equipment loads - anyway good luck with it, your right nVidia has taken notice and said it's their problem not MSI so a fix for those unfortunates is on it's way

Scrolling problem with K7N420 Pro

I've got a K7N420 Pro and a Athalon 1800XP running Window XP Home with 768 MB of DDR 2100 RAM. The problem is the scrolling is terribly slow. Doesn't matter what I use, Explorer, Word, or any other software. Doesn't matter if I use the scroll function of the mouse or the scroll bar on the side of the screen.
The screen setting I'm using is 1024x 768 and it seems a little better at 800x600. I've updated the bios to version 2.6 and I've played around with bios settings and nothing has helped.
Has anyone else experienced this?

Quote
Originally posted by bim2k
Macoombi,
What's the idle CPU usage in your Task Manager on XP?
Also, which graphics/nForce drivers are you using? Please don't tell us the ones from the CD ....
BIM2k
Wow, that was a fast reply. I'm not at home right now, I'm posting from work (notty me). I'll post that info when I get home tonight.
I guess I won't tell you which drivers I'm using :D

Sound problem with macbook pro! help please

hi guys!!
my mac sound is not working also the headphones however if i plug the hdmi cable it works on my tv !!!!! I think it is a hardware problem!!
what do you think guys !!!!

Hi a,
Have you checked the settings in System Preferences > Sound?
There is a switch inside the audio jack that may be stuck. Try gently inserting an audio plug, gently wiggling it, and then removing the audio plug.
See if this discussion helps: https://discussions.apple.com/message/16201033#16201033

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

I know OSX 10.9 Mavericks introduced a power saving feature called App Nap which is meant to slow down applications that it determins are inactive (or when minimized). This would mostly likely cause problems if you're dynamically linking After Effects comps to your timeline or sometimes exporting to Media Encoder.
Try disabling App Nap for all your Adobe App files...
Go to your Applications folder
Go into individual Adobe app folders (ie. Adobe Premiere Pro CC)
Right-click on the Adobe app file (ie. Adobe Premiere Pro CC.app) and select Get Info
When the info window opens up, add a checkmark beside "Prevent App Nap"
Restart the application
This fixed all my performance issues.
-Pete

I have sounds problems with iOS 7

I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

HI, I just bought Photoshop CS5 and I have a problem with HDR pro

HI, I just bought Photoshop CS5 and I have a problem with HDR pro . when I am trying to mount 3 images together it act in a strange way ( the images appear and disappear many times) then when the window with the result appear and I say ok it open up in photoshop as a single image ( in the layers there is just 1 photo) and when I am trying to work it up with the Plug in/filter HDR Effex Pro (Nik softwear) a pop up window appear saying that the file is missing and the operation it is not possible. Why and what is happening ? Someone can help me ?

This is normal operation. The output from HDR pro does not produce a layered file. You make all your adjustments in the Nik Plug-in. Once Nik has finished you then make any rinal changes in Photoshop. Trying to use NIK again on the image in Photoshop is not the way to do this.
When HDR pro comes up do you see all the presets and controls? Presets on the left and controls on the right
MK

I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance.

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.

Really weird sound problem with rhythmbox[SOLVED]

Well, I can't find anything on this, so i'm posting it here. I have no sound problems with alsa or other gstreamer apps(totem, banshee plays sound just fine). But when I try to play something in rhythmbox it just does not work. Mostly there is no sound, but every couple of seconds you can hear a distorted sound that is suposed to be playing for a moment. Rhythmbox does not issue any warnings or errors when launched from terminal. Is this some kind of bug?
Last edited by klohs (2009-05-15 13:34:46)

I had the same problem, but it disappeared yesterday. Try it run under root - it helped me. I dont really know how i fixed it, but it works under normal user now as well ...I hope there will be someone who knows.

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

Sound problems with iPhone 6 plus

I have sound problem with my iPhone 6 plus.
Some apps have sound, others no.
For exemple the app minipiano has no sound (it works fine on my ipad mini)
Does anyone has the same problem ?

Hello there, .applefan.
When having performance issues with an application installed on your iOS device, the following Knowledge Base article offers up some practical steps for troubleshooting your issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sound problems with K7N420 pro

Similar Messages

Maybe you are looking for