SoundBlaster Live with W2

I upgraded my Win 98 system to Win 2000. My 6+ year-old SoundBlaster Li've isn't being recognized correctly.
What patches/drivers do I need to load and how, to get it all working properly?

Dave4Cal,
Here is what you will need to do:
) Go to the support/downloads section of this website and select sound blaster, Li've, Li've Platinum from the 3 box setup. Then select Win2K from the OS box.
2) On the next page there will be application updates along with the Li'veDrvUniPack. Here is what you need to download:
Creative PlayCenter 3</LI>
Sound Blaster Li've! - Creative Recorder (English)</LI>
Creative PlayCenter Download for Creative Sound Blaster Li've!....</LI>
Sound Blaster Li've! Li'veDrvUni-Pack (if you deleted it)</LI>
3) Cleansweep the card out following these directions: http://us.creative.com/support/kb/ar...asp?l=2&sid=72
4) Disable any Antivirus software on your system after the final reboot.
5) Install the card from the CD. Do a minimal install including only the card, playcenter, and the programs that you use. Leave the taskbar (or launcher) out of the install.
6) Reboot and when it comes back up run the Li'veDrvUni-Pack (make sure AV is still disabled throughout the remaining steps).
7) Reboot if needed and then run the Creative Playcenter 3 file, followed by the larger more recent version.
8) Install the Creative Recorder. You should now be setup correctly and can reenable your antivirus.
Jeremy

Similar Messages

Soundblaster live, with live drive inst

Can anyone tell me where to find updated drivers for the sb li've platinum for win xp.
I cant get this card or li've dri've to work even with the install disk that came with the dri've.

in the update (or autoupdate by IE) section of this site afcourse.
http://www.creative.com/support/downloads/ (select region + hardware)
p.s. weird that it won't install a fresh install cd..
Maybe hardware conflict with pci-sharing(try to put soundcard in free not shared pci-slot.
Worst case scenario(but works 00% mostly)=reinstall windows totally with all the hardware(that you want) inside/installed.Message Edited by www_96KHz_tk on -6-2005 08:40 AM

Problem with DTT3500 soundset and onboard Soundblaster live! 24-bit

Hi,
I have bought a new PC with an MSI k8n sli platinum MB. this mainboard has a built in soundblaster live!24-bit chip onboard. it works great on headphones and normal 2 set speakers (analog connection).
however, when I try to set them up at the DTT3500 speaker set, trouble begins.
before continuing, just want to say First that my older PC is standing next to it, with a Soundblaster live! 5.1. If I connect with this PC to my speaker set, via the digital uitput, everythin works great. (5.1 surround).
In the DTT3500 manual, when Digital DIN is blinking, it says it isn't recieving any signal, or not the right one (like AC-3). (I know this when on my old PC when I switch to headphones, the digital din is then blinking, which is normal as I disabled Digital output in Windows)
now my questions:
Is this digital port is ac-3 signal or somthing else on the Soundblaster live! 24-bit?
Do I need to use another type of cable, like SPDIF Din Cable? (I now have a minijack to Din cable)
I tried with optical, it works, but only with 2 speakers (left and right / digital output is on). is this normal? If i look at the manual, it's typical used for gameconsoles with stereo left and right. I guess this is so with the DDT3500 decoder...?
if I try Digital Din on the Decoder, it doesn't work. the Decoder Led keeps blinking. Yet in Windows, digital output is on and 5.1 speakers is selected.
In short, exact the same setup on the Decoder and PC as my older PC.
My guess is the the soundblaster live! 24-bit is an enhanced version of the soundblaster live! 5.1? Am I wrong, I don't know....
I do know that the reviews said you could use the digital port (orange one)
here is a picture:
http://www.overclockers.co.nz/ocnz/reviewimage.php?id=05boardnf4sli00microstak8nslipt0104&file=panel.jpg
and here more info on it: http://www.overclockers.co.nz/ocnz/review.php?id=05boardnf4sli00microstak8nslipt0204
I would apreciate any help, as i'm really stuck at the moment.

does anybody use the soundblaster live! 24-bit to power a surround speaker set? or is it just impossible? (for gaming)

ALsa + Soundblaster Live 5.1 + 5.1 Sound

HI there!
I finally bought a 5.1 Surround System today, but I have a major problem. Only the Subwoofer, Fron-Left- and Front-Right-Speakers are working, no Sound from Center, Surround-Left- and Surround-Right-Speakers
Here is my modules.conf, Alsa-Page says it should work:
# module : ALSA
alias char-major-116 snd
alias snd-card-0 snd-emu10k1 snd_cards_limit=1
options snd-emu10k1 snd_index=0 snd_id="EMU10K1" snd_extout=0x1f0f
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd-pcm-oss snd_dsp_map=0 snd_adsp_map=3
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
And now my .asounrc
pcm.emu10k1 {
type hw
card 0
ctl.emu10k1 {
type hw
card 0
I tried so much already and nothing works
I played around with alsamixer and I finally got the Center-Speaker to work, but it just works instead of the Front-Left-Speaker. It really sucks.
Maybe you can help me, it would be nice.

i had some same issues , but i have soundblaster live 24-bit , but disabling the onboard bios didnt do anything for me , so i had to look for some ways to figure out how to fix this , * love thy google.com/linux *
bash# speaker-test -c6 -t2 ( this is to test your surround speakers , providing your using ca0106 driver such as myself )
if you only get a few channels you could also make your ~/.asoundrc file with some goodies in it ill post a few examples i have found
pcm.ca0106 {
type hw
card 0
ctl.ca0106 {
type hw
card 0
ctl.!default {
type hw
card 0
pcm.!default {
type hw
card 0
pcm.!default {
type plug
slave.pcm "dout"
pcm.dout {
type dmix
ipc_key 1025
slave {
pcm "hw:0"
period_time 0
period_size 1024
buffer_size 4096
rate 44100
ctl.dout {
type hw
card 0
pcm.duplicate {
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
pcm.dmixs51 {
type dmix
ipc_key 1024
slave {
pcm "hw:0,1"
rate 48000
channels 6
period_time 0
period_size 1024
buffer_time 0
buffer_size 4096
pcm.!default {
type plug
slave.pcm "dmixs51"
pcm.duplicate {
type plug
slave.pcm "dmixs51"
slave.channels 6
route_policy duplicate
Now dont forget to run alsaconf before you do this and make sure you have 5.1 surround speakers for this as well
any other questions about the soundblaster live 24-bit , contact me and ill try to help if i can , ( i have been reading about this for days )

Soundblaster live gameport not working on k7n2 delta-L

i have a k7n2 delta-L motherboard and i installed a soundblaster live sound card and can not get the game port to work at all. first i thought it was a bad card so i installed a different card and the same thing so ithen thought it was the game controller and tried a different one and it didnt work either . and yes i disabled the on board sound in the bios before installing the card. i have it in ide slot #3. seems to be the best to go with .i am running win 98 se. and all my drivers are up to date. any help would be greatly appreciated. thanks

fourhooffarms,
In the BIOS Disable the onboard Realtek Sound and then put the Live! in PCI Slot 3 or 4, then set the IRQ of that Slot to IRQ5.
Also list all your IRQs and every Device on each IRQ.
Take Care,
Richard
P.S. Do list the specs on your Power Supply too.

SoundBlaster Live! 24 and Vista - Deteriorating Sound Qual

I've recently upgraded to Vista Business, and my system informs me that except for the drivers for an ancient scanner all is working properly.
When playing music (using a Creative SB Li've 24bit card with the most recent driver installed), all starts off well (in fact playback is better than under XP Pro) but the sound quality starts to deteriorate badly, especially when I open a browser. Quite often the browser itself seems to freeze.
I have 3Gb RAM, with a 3.60Ghz P4 processor.
Task Manager tells me that often I am running at 00% of CPU capacity, though the problem seems to occur at lower usage too.
I've checked everything I know to check but just can't seem to get to the root of the problem. Can anyone suggest anything I should be looking at?

Sadly no real progress.
I simply pulled the Soundblaster Live 24 out of the computer and am using the onboard sound instead which at least for me Arch recognized just fine.
I haven't been able to get any suggestions for why the Soundblaster was not working, but I am going to try another sound card a friend lent me and see what happens.

MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
The trouble is, I have just setup my new system
MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
I have tried to download many other drivers with no luck
My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
Any help appreciated

If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
As for the drivers for the soundcard:
Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Good luck!
Message Edited by CTman on 05-07-2008 0:28 AM

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup.

Xperia Live with Walkman on Android 4.0.4 (with screenies)

My Thoughts on Android 4.0.4 on Xperia Live with Walkman
-Sleeker Font Style.
-Camera Shortcut right from the Lock Screen.
-Able to access the drop down notification bar even when locked.
-Music Player access right from the lock screen
-New Owner Info Option display
-Face Unlock works great on Live with walkman.
-Awesome new themes. Xperia NXT Style! Although they are only wallpapers, not the live ones seen on 2012 devices. My favorite is Tourquoise (Did I spell that right?)
-The Performance Assistant will help you disable some of the apps that you dont need.
-There it is! Official Android 4.0.4. Ice Cream Sandwich. OH YEAHHHH!!!
-If you repeatedly tap on the Android Version Menu. This little Primitive Droid will surprise you. HEHE!!
-Oh, and there's also a new logo when you start up your phone : SONY ONLY not Sony Ericsson, and in its ever-so-recognizable font style. =P
-The Sony Ericsson Liquid Logo has also been changed to Walkman, with a bubbly and quirky animation.
-Ill try to post screenies if I can.
-Greatly Improved Android Browser. Seriously, It's WAAAAYYY smoother than the one in GB.
-The Browser runs smoother than GB.
-Websites with heavy flash content load smoothly. =D
-Saved Pages Option to view pages offline.
- Only Android provides true multitasking capabilities.
- Hold the Home Button and you will be taken to this new recent/running apps tab. Swipe to the right and that app is closed. =D!!!
-Widget Preview.
- A NEW Gallery aside from the Xperia Gallery. The new gallery provides edit options. Like Picsart or Instagram or Adobe Photoshop Express. So, if you want to save some precious memory, stick with the gallery editing options =D
-HD playback still smooth as ever. I don't know what the fuss is all about. =P
-Images look fine as they did in gingebread. It really depends on shooting situations.
-Captured 720p HD Videos doesn't lag for me. Play back is smooth. Same as in gingerbread.
-Maybe, People are just not used to the new interface, but with a little bit of tinkering, you should get used to it in no time. =P
-The New Camera Interface. It now includes a dedicated on screen camera button.
-Captured Photos Quality are the same as in Gingerbread.
-Captured 720p HD Videos run as smooth as in Gingerbread.
- The New YouTube App interface.
- The Lockscreen Music Player
- There was a review about not seeing the clock due to the music player. Duhhh, you can see it at the upper right corner. =P
- I love how the album art and the album name also appears. If you are like me who converts songs from youtube to mp3. A little app called Tune Wiki can help you edit its tags so you can enable infinity view. =D
-The New Dial Pad, which provides Smart Dialing.
-About the lagginess issue. It takes about 2-3 seconds to start. It depends on how many entries you have in your call log.
-There's a workaround on it though, access it through Contacts.
- RAM usage feels the same for me. Good Job on this one Sony. =D
- I was really worried about RAM ever since I read Sony's article about GB and ICS. They did well on optimizing this one.
- My screenshot is not the best there is since I was syncing Facebook inside Xperia. But, normally it has about 180mb used and 160mb free.
- New APPS installed. Some apps like Wisepilot for Xperia can now be moved to SD card, thereby freeing more phone memory.
- My New Homescreen. It retains the very convenient four corner bubbles.
- 5 Widget Panes
- A New Google Search Widget
- Walkman Player. I was expecting the music player from the NXT series. Hehe, but I guess this will have to do. =D
- I've never seen the refresh music library option even in the GB walkman player. Through experience, everytime I add a music file it gets added in real time. No refresh required...
- Oh, and also... I think the speaker is a tad bit louder than before. Like 20% louder. I noted no distortions
- The orange lights work as usual.
- Still no customizable equalizer. This is a walkman phone. It has to have superb music customization capabilities. =P
- Battery usage for me remains the same like in GB.
-Monster Use/Heavy Gaming : 4 hours (HD games cracked for HVGA screens i.e. Asphalt 6 Adrenaline, Need for Speed, Shadowgun, Dead Space) Although I doubt you could play that long due to the screen size and the cramps you may get from playing. Carpal Tunnel Syndrome anyone? Haha.
-Internet Browsing : 6-8 hours
-Video Playback using Stock Player and YouTube App : 6-8 hours
-Video Playback using MX player : 4-6 hours (I use it for my .avi files)
- I use Easy Battery Saver to Optimize battery performance.
In Super Mode it can last up to 24-36 hours with only texts and calls which I think is pretty impressive. I can go on 16 hour hospital shifts without worying about charging my phone.
In Normal Mode it can last 8-10 hours.
-It really depends on how you use your phone. I strongly believe it greatly varies with every user.
- Don't believe posts that say it doesn't run as smooth as GB. IT RUNS AS SMOOTH AS GINGERBREAD. EVEN BETTER. =P
- Sleeker new user interface.
- All of my apps and games still run smoothly on ICS. I'll keep searching for bugs.
- The ROBOTO font is awesome.
- I find the interface more intuitive and streamlined than GB.
- Lots of new features implemented. i.e. Smart Dialing, Face Unlock, Performance Assistant
- Icons have been remodeled.
- I also love how fluid it is now when it switches screen orientation. =D!!
- No bugs for me whatsoever.
- I miss the quirkiness of the GB user interface. Like the transparency of the messaging app. But I guess, I have to move on, change is for the better.
- A SOLID AND STABLE UPGRADE. NOW MY XPERIA LIVE IS COMPLETE.
Problems:
-Yes, the LED SMS notification doesn't work. But all other LEDs work. i.e. Yahoo Messenger, Incoming Calls, Twitter. I guess they may have overlooked this one. It's the only problem that I see. I find it livable still. Greater good for the greater number of people =P
-THANKS TO SONY!!! A huge step on the right direction.
-KIMOZAVE - NOOBIE SMARTPHONE USER

hi kimozave, ur review seems to be full of praises for ICS, but I have gone through many threads on disadvantages of ICS, so very much confused if I should go with ICS update or not....
can you plz tell how was is experience on:
1. Dial pad - I have read its laggy.
2. The phone is having a hard time authenticating wifi connection when using WPA encryption.
3. Thumbnails in the gallery does not match the original picture.
4. Phone dies at 10% battery remaining.
5. SIM card keeps ejecting
6. Camera is more laggy and image quality is poorer
Thanks,

I'll just live with the terrible battery life on my iPhone 5....

IMHO, each new iPhone has worse battery life than the one before. I've come to expect this. They claim the battery is better, but in real life use, this is simply not the case. I've given up trying to figure it out, I'll bring it into the apple store tomorrow, maybe they'll even swap out the phone for me, but I doubt it will make a difference. The battery is plain awful, but I'm never far away from a charger, whether it's in my car or office. I've grown used to it at this point. Nor am I going to do one of the 10,000 suggestions I keep seeing on here and other forums. Restore as new? No thanks, it's just the way I want it, I don't want to spend 6 hours loading everything again. Turn off location services and apps? What's the point of offering a feature if you can't just leave it on and use it? I have everything (well, almost everything) on. Wifi, brightness all the way up, location services, it's all on. Why? I like using them. That's why I bought the phone in the first place!
So, the bottom line is: I'll live with it. I'll live with having to charge it a few times a day, I'll live with the fact that it'll never be perfect. I will go to the genius bar just for the heck of it, there are issues with iCloud not backing up, and wifi not as strong as the 4S, and sometimes the usage and standby times are identical, so perhaps mine is defective, but I doubt it'll make much difference. Sure, 6.1, or 6.0.1 will be released soon to address these issues, as I'm convinced this is mostly a software issue, but at this point I'm done trying to figure this out.
D

Hello there, EdisonGurraj.
The following Knowledge Base article should provide you with assistance in what steps to take to troubleshoot your iPhone's battery life:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Speifically:
Battery life seems short
Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
Try turning iPhone off and then on again.
Connect iPhone to iTunes and restore iPhone.
If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
Cheers,
Pedro D.

I lost the USB cable that came with my phone (wt19i Live With Walkman)

I lost the USB cable that came with my phone (wt19i Live With Walkman). However, the charging power adapter still here.
I don't have any other cable.
My phone's USB port use Micro-B connector.
If I buy a high quality USB cable with Micro-B connector, will it be compatible for both charging and data transfer?
Is it necessary to buy the original Sony Ericsson USB cable? If yes, which model should I buy?

http://www.sonymobile.com/gb/support/contact-us/
Contact them and they should be able to help you
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out?

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out? Also will I be able to get Icloud to work?

Hi Mary, the other so called "Features" of iClound will not work for like Syncing, but eMail will.
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
          ▪          Server name: imap.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 993
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password
SMTP (outgoing mail server) information:
          ▪          Server name: smtp.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 587
          ▪          SMTP Authentication Required: Yes
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password

Go Live With Oracle On Linux

Hi all,
I thought you guys might be interested to know that this stuff
is used out there...
I work for a Government property management company ( Housing
New Zealand ), and they were looking at downsizing their systems
infrastructure. A subset of the business was picked to pilot a
downsized system.
We ported from :
"thin client" : Citrix Winframe, Developer 2000, HPUX , Oracle
7.3
to a :
client server : Win95, Developer 2000, RedHat 6.0, Oracle 8.0.5SE
Instead of running 80 users on :
80 P300 PCs, Winframe Client +
1 4xP200 Winframe/NT, Developer 2000 +
1 HP-PA/Risc, HPUX ,Oracle 7.3.3
We are running 5 users on :
5 P300 PC Win95, Developer 2000 +
1 P300 PC RedHat 6.0, Oracle 8.0.5, samba
( Obviously this was the pilot subset ! )
Although this represents a "step backwards" in deployment
architecture ( 3 tier - 2 tier ), it represented a decrease in
cost infrastructure per user ( No Winframe/NT License, No
expensive Proprietry hardware, only 1 ( Cheap ) propritary o/s (
Win95 ).
We went live with this beast on 1 Aug.
The Redhat box has been rebooted once since them - not by us (
Power outage at the site ).
The server is just idling with 5 concurrent connections.
Oracle 8.0.5/Redhat is rock solid as far as we can tell !
( with the right patches ....
for those interested they are
8.0.5.1 patchset
redo log async write - bug 882446
glibc patch
setuid security patch
Cheers
Mark
null

Hi Mark,
I am also running Oracle 8.0.5 in my RD6.0 machine.
I installed Developer2000 into my win98 machine.
I tried to login using the developer2000 into the
oracle running under linux but connection cannot
go through. I don't know the reason to this. Though
I can use the SQL*Plus to connect to this database
from win98, can you figure out what is wrong with
my setup?
Thanks,
-Paul
Mark Kirkwood (guest) wrote:
: Hi all,
: I thought you guys might be interested to know that this stuff
: is used out there...
: I work for a Government property management company ( Housing
: New Zealand ), and they were looking at downsizing their
systems
: infrastructure. A subset of the business was picked to pilot a
: downsized system.
: We ported from :
: "thin client" : Citrix Winframe, Developer 2000, HPUX , Oracle
: 7.3
: to a :
: client server : Win95, Developer 2000, RedHat 6.0, Oracle
8.0.5SE
: Instead of running 80 users on :
: 80 P300 PCs, Winframe Client +
: 1 4xP200 Winframe/NT, Developer 2000 +
: 1 HP-PA/Risc, HPUX ,Oracle 7.3.3
: We are running 5 users on :
: 5 P300 PC Win95, Developer 2000 +
: 1 P300 PC RedHat 6.0, Oracle 8.0.5, samba
: ( Obviously this was the pilot subset ! )
: Although this represents a "step backwards" in deployment
: architecture ( 3 tier - 2 tier ), it represented a decrease in
: cost infrastructure per user ( No Winframe/NT License, No
: expensive Proprietry hardware, only 1 ( Cheap ) propritary o/s
: Win95 ).
: We went live with this beast on 1 Aug.
: The Redhat box has been rebooted once since them - not by us (
: Power outage at the site ).
: The server is just idling with 5 concurrent connections.
: Oracle 8.0.5/Redhat is rock solid as far as we can tell !
: ( with the right patches ....
: for those interested they are
: 8.0.5.1 patchset
: redo log async write - bug 882446
: glibc patch
: setuid security patch
: Cheers
: Mark
null

How can I remove an account and apps from another user from my Ipod. My nephew used to live with me and everytime I sync my Ipod his stuff is added to mine. I have no way to contact him for his password.

I need to know how to remove an iTunes account associated with my computer. My nephew used to live with me but has moved out. Everytime I sync my iPod touch his stuff is added to my device. I have no way to contact him to get his password. How can I make this go away. He listened to music that is very offensive to me and I dont want it in my library or playlists. Any help would be greatly appreciated.
Thank you in advance,
Shelly

You can use computer iTunes to help.
Connect your iPod Touch to Computer's iTunes
In iTunes, select your iPod Touch under DEVICES (left pane).
On right pane select Music at the top.
Now you can de-select the music/playlist or anything you don't want and click Sync button bottom right.
You can do the above for Apps, Books, etc.
You can of course, de-authorize the computer in iTunes menu Store.
Note: That will make everything using his AppleID inaccessible.

SoundBlaster Live with W2

Similar Messages

Maybe you are looking for