Sounds like the camera

Whenever I turn the home screen on or off by pressing the on/off switch, I get a sound like the camera is taking a picture.
I have Lookout, which has an option to take the picture of anyone that enters the wrong password x number of times, but I have that disabled.
Does anyone know if this is a "feature" and if I can get rid of the sound? It's getting kind of annoying.

Then i would try Running the phone in Safe Mode and see what it does if the issue stops then you Know there is a 3rd party App that is possibly causing the issue at then you would want to remove each app one by one till the issue goes away). But if the issue remains then i would Look at Running a System Cache, or Doing a Factory Reset.. And as i mentioned in my earlier post holding down the power + lower Volume down will snap a screen shot but continuing to hold will power off the Razr it's referred to as a Power Cycle same thing as you use to do when pulling the Battery.. When i do a power Cycle i hold the button in for at least 30 sec...  

Similar Messages

  • I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture.  Anyone else ever experience this

    I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture.  Anyone else ever experience this?

    No, but when the other party hangs up first I have heard the click of the disconnect.

  • Volume up button sounds like the camera is going off

    When I press my volume up button it sounds like the camera is going off but no pictures are being taken.  Any idea why this happens?
    Thanks!

    Hello there, JDHMB.
    You might want to close out all apps first and foremost:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Then it might be worth attempting a restart of the iPhone, and then a reset, should that not resolve the issue.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the sound is still being generated by the phone while using volume controls, you may want to try restoring the iPhone.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Strange. After importing a series of images from a Sony camcorder, I see the images but there's no sound, although there is sound on the camera.

    strange. After importing a series of images from a Sony camcorder, I see the images but there's no sound, although there is sound on the camera.

    Hi Jan,
    Looks like a common problem, see if this is of any help...
    http://www.bigasoft.com/articles/how-to-import-sony-handycam-avchd-mts-mpeg2-to- imovie.html

  • HD videos from Sony NEX-3 sound like the Chipmunks

    My Sony NEX-3 720p MP4 videos sound like the Chipmunks. Video frame rate appears ok but the sound is way too fast. The files play nicely e.g. in Preview though.
    iMovie imports the files nicely, using the internal SD reader in my iMac. However, the sound is out of sync in the imported files. From the sound of it, it seems the audio runs at least at 2x the speed.
    Currently I use Handbrake for converting the camera clips into 25 fps m4v and then importing these into iMovie but it is a pain.

    Can you tell me how you imported the video from your NEX-3 to iMovie?  When I try, the camera automatically opens iPhoto and imports it there.  If I open iMovie, all of the selctions are grayed-out so I can't import them.  I've tried getting the video straight from the camera but can't seem to do that either. Can you help?

  • How to disable the flash and sound of the camera o...

    would I like to know how I do to disable the Flash and sound of the camera of N73?
    or does anybody know about some software that makes that?

    06-Dec-2008 08:30 AM
    krizanand wrote:
    hi suman,
    i too faced this problem afetr updating it to new firmware,when i checked my application manager there was an application which opens only with the ZIP manager
    it was troubling me a lot when i switch off and ON the phone time and again
    Finally i did a RESET *#7370# the application was not reflecting in the App manager and the problem got resolved
    Hope this works out for u
    if it is i will be Glad cheers........... try it
    Yes, that will solve all problems and as well as your data. There are alternatives which I already mentioned here. You can search to find the answer, since it to complicate to do it again.
    C6-00 with 8GB MicroSD

  • How can I silence the sounds from the Camera, "klick (camera" and "ping (video)"?

    I need some help. How can I silence the sounds from the Camera, "klick" (camera) and "ping" (video)? Sometimes you'd like not to let others know that you're taking a picture/recording.

  • My macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas?

    my macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas? It's really worrying me because I haven't had it for up tp 2months and last week everytime I switch it on it makes sooo much noise. And I treat like an egg so I don't understand whats going on.

    Hey,
    My friend had a very similar issue to yours. The issue came down to the pins of the MagSafe not meeting with the MacBook perfectly causing the lights and the transfer of power to be wacko. I'm not sure if this is issue that your experiencing, but its worth checking out the pins and the MagSafe area on your MacBook for debris.
    Troubleshooting Magsafe power adapters with stuck pins
    If that is all clear, then I would suggest you call AppleCare or take it in to an Apple Store to have it checked out.
    Tom

  • My recorded signal is not sounding like the signal I am monitoring.

    My recorded guitar is not sounding like the signal I am monitoring. It sounds very good when recording, but lacks energy and detail when it is played back. If I am using input/direct monitoring am I also bypassing the Analog to Digital converters? Could this explain the difference in sound quality?
    Would it be the same to monitor a signal directly out of the sound card and to monitor "through" Logic?
    My sound card is a Presouns Firepod.

    Mastergod wrote:
    My recorded guitar is not sounding like the signal I am monitoring. It sounds very good when recording, but lacks energy and detail when it is played back. If I am using input/direct monitoring am I also bypassing the Analog to Digital converters? Could this explain the difference in sound quality?
    Yes.
    Would it be the same to monitor a signal directly out of the sound card and to monitor "through" Logic?
    No.
    My sound card is a Presouns Firepod.
    Consult the manual of that device, to see if you can learn from where in the signal chain it gets your direct monitoring from --- PRE conversion or POST conversion... My bet is that it is pre conversion.
    Cheers

  • I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

    I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

    All the Drum Kits available for GarageBand are mixed in stereo.
    Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
    Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
    What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • How do I change the way things sound like the bas, troule

    How do I change the way things sound like the bass, trouble,etc

    What is your operating system?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to make it look like the camera is following a zig zagging line

    I have an animated video where a person clicks a button and an arrow appears coming out of the right side of the computer. I would like to make it look like the camera follows the arrow as it zooms along a zig zag path and eventually ends at another computer.  Does anyone know of any good tutorials for this? 
    Thanks,
    Paul

    This is just a matter of keyframes for camera position and point of interest.You are probably not going to find a tutorial that exactly matches your project. Try this:
    Open up 2 views, one active camera, one top view.
    Set a position keyframe for the camera where you want the movement to start.
    Drag the point of interest to point at your subject (animated arrow)
    Using the top view and setting the CTI (current time indicator) to the end point of the camera move, move the camera's point of interest  to the same position as the animated arrow
    Still in the top view, move the camera to it's final position
    Using the pen tool (keyboard shortcut g) add points to the camera position path and drag them into a zig zag shape using the top view
    Selecting the Point of interest in the timeline, adjust the position of the point of interest to follow the arrow as it animates across the screen by moving the CTI and setting new positions.
    Another thing you could do would be just to use a lookAt expression for point of interest. This would keep the camera pointed at the arrow.
    Hope this helps. Animating a camera is one of the most basic skills an AE artist should have. It takes a bit of practice but it's not hard.

  • When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.

    When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.
    == This happened ==
    Not sure how often
    == I opened firefox

    dont have google open in a tab!!!!!!!!
    (if you are one who opens FF and it opens google then immediately open another tab to go to a site then just visit the site from the page that opened without opening a new tab)
    OR
    if you have cool preview then disable that
    (the sound is for the celebration of 30 years of pacman and you can play the game on google's homepage)

  • When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

    My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.  First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

    You may want to do a Restore on the shuffle in iTunes.  The Restore button is on the shuffle's Summary screen in iTunes.  This will erase the shuffle, re-install its software, and set it to default settings.  If it's a software or data corruption glitch, the Restore should fix it.  After the Restore, reload or resync your songs, and try it again.  As a test, you may want to initially select a small number of songs to put back on the shuffle.

  • TS3938 The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

    The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

    Scot Lee wrote:
    The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?
    Yes Rosetta has been gone for over two years. You can always search here for how Michael Lax's instructions on how to run SL Server in a virtul environment, but I don't think it is too kind to gamers.
    Advice? Buy an old Mac that runs PPC software.
    Cheers
    Pete

Maybe you are looking for