Spacing with fixed space fonts
Using RoboHelp for Word 6, Build 099 for a large Help
project. We are converting from WinHelp to HTML Help. One topic
consists of a large block of text (lots of columns in a fixed space
font - Courier New) with popups annotating the text.
With WinHelp the vertical allignment is fine. When the HTML
Help is compiled, multiple spaces appear to be compressed to a
single space making the output unreadable.
For example we get :
|===============================================|
| |
| Developed by |
| |
| XP Software |
| |
|===============================================|
| XP Software November, 2004 |
| Data File Version ---> 11.7 |
| Serial Number: 42-xxx-0000 |
| XP Software (Evaluation) |
*===============================================*
Multiple spaces are need to make the right end of the boxes
line up. Columns with numbers are worse.
Is there any way to compile forcing the multiple spaces to
remain?
TEB008 -
In Word, highlight the topic, and do a Word search-n-replace
of spaces with no-break spaces. You'll see those options in the
s-n-r box when you click the MORE button.
Similar Messages
-
Replacing inconsistant spacing with single space in a string
is it possible to replace multiple spaces within a string with one space only. Number of spaces is different all the time.
say one field contains strings with imbedded spaces
I need to replace all these values so that there will be only one space between words.
For Eg.
Input Expected Result
aaa bbb aaa bbb
ww vv ww vv
ww ss kk ww ss kk
[/code]user11253970 wrote:
I am in Oracle 9i :( I can not use reg exp
Assuming strings do not contain CHR(0) (character with ascii code 0):
SQL> SELECT 'aaa bbb aaa bbb' str,
2 replace(replace(replace('aaa bbb aaa bbb',' ',' ' || CHR(0)),CHR(0) || ' '),CHR(0)) new_str
3 FROM dual
4 /
STR NEW_STR
aaa bbb aaa bbb aaa bbb aaa bbb
SQL> SY. -
[iPhone] [Bug] Fixed Width Fonts Aren't
Aren't fixed width, that is. I imagine they're still fonts. =)
Recently I've been doing some ASCII art applications on the iPhone and I've noticed that things don't render the way I expect. I threw together some quick demonstration images of boxes rendered with fixed width fonts in TextMate.app and then on the iPhone simulator to show the difference. Although I used TextMate.app, similar results were found using TextEdit.app.
First some boxes rendered in the fixed width font Monaco 12 pt in TextMate.app
The first is a large 6x6 box with an interior of 5x5 spaces.
The second box uses tabs. This is not an important box really--it's expected that different apps use different lengths for tab. In fact, this box looks completely different in TextEdit.app where the tabs are much wider. Don't worry too much about box number 2.
The next box is a 3x3 box with one space in the center, and the last box is a 4x4 box with... well, you get the idea. Note how all boxes render as squares correctly.
Now here's an image of the same boxes rendered with Monaco 12 pt on the iPhone's UITextView:
Some problems are immediately visible. White space has some width, but it's far too small. I'm not too concerned about the tabs (box #2) since as I said above, I expect some variance in tabs, but the rest are pretty bad, especially box #3 whose single space looks positively anorexic. I focus a lot on white space here, because it's notable, but also notice that the + is wider than either the - or | as well.
The Monaco font on the iPhone is not fixed width.
The situation with Courier 12pt is slightly better but still has issues:
Courier 12 pt on TextMate.app:
Courier 12 pt on the iPhone:
Unlike Monaco this is almost correct. Ignore box #2 again--I don't expect tab to work out. Courier doesn't have the same issue Monaco has with most characters. |, +, and - are all taking up the same width. However, as the boxes grow larger (Boxes 3, 4, and 1), the consecutive spaces start to show more and more how they're slightly too thin. It's barely perceptible in box 3, noticeable in box 4, and impossible to miss in box 1.
It looks like the Courier font on iPhone has a space which is too narrow to be fixed width.
As far as other things to try: I tried this with Andale Mono and Courier New as well with similar results. Also, although I've used a UITextView here, it also happens if you render a UIWebView containing the boxes inside of <pre> tags as well as outside of <pre> tags but use for spaces.
Has anyone else seen this phenomenon? Is there a fix or something I'm missing? Or is this a bug?
Thanks!Bump. =(
-
How to generate blank spaces at end of the record in a flat file with fixed
Hi,
I am generating a flat file with fixed length.
In my ABAP program, i am able to see the spaces at the end of the recors in debug but when download to applicaiton server i am not able to see those spaces.
How can i generate blank spaces at the end of the record in a flat file?
Please update
Thank youHow are you downloading the file? And, How are you looking at the file on the application server?
Can you provide snippets of your code?
Cheers
John -
My query is related to frames. Can it be taken as a thumb rule that whenever we put a frame with its vertical and horizontal elasticity as fixed which is the default, it will take that much of fixed space in the report. Please help me in this as it is very urgent.
Yes. If you have a fixed size frame it will take up that much space in the output.
However, if you have objects within the frame then the fixed size frame will repeat across multiple pages until the content within the frame completes formatting. -
Sampling/Triggering externally with DSA cards with even sample spacing in frequency space
Hi there,
Is it possible for the NI DSA cards to trigger on a signal to record at a desired time, at an un-even spacing in the time domain. For my application I need to have the samples evenly spaced in frequency space.
I would set the first channel for acquisition from the source. Would use the external trigger port, or the second channel for the trigger signal?
This is for a optical coherence tomography system.
Thanks!Hi Anthony,
You may have to excuse some of what I say since I am still a bit uncertain of what you need to accomplish due to my lack of understand of OCT. If you wanted to start your acquisitino at a given time by using an external trigger, most cards have a trigger input which will allow you to do so. However, using an external clock will be much more difficult. While it will be difficult to use an external clock signal with a DSA device, resampling may be a better option. Here is an article which shows some of the resampling functions which, by my understanding, may accomplish what you need to do. Let me know if this puts us in a better direction.
Regards,
Kent
Applications Engineer
Digital Multimeter Home -
When I copy/paste a paragraph from a PDF doc (onto Facebook status bar, for example) it pastes with no spaces between words. I.e: "The manhadajugofcoolwaterand offeredmeadrink." How can I fix this? I've searched everywhere for the solution but didn't find anyone had this issue. I'm new to Apple so any help will be much appreciated. Thanks!
I can't speak about this occurring with FaceBook since I don't use FaceBook, but I see the same type of thing when I copy and pasted from websites. It doesn't always happen and I cannot find any particular set of circumstances under which it occurs or does not occur.
I am merely responding to let you know that it happens to me as well and I have seen no way to correct it. I'm not so sure that there is a way to correct in in that it may have something to do with how the original text is formatted in the PDF or on the website and how it eventually "fits" into the text field or the area in which it is pasted. -
Problem with printing perfomance when using a fixed width font
Hello.
I'm using the java.awt.print.Printable interface for printing text.
Everything works fine when I choose a font like Serif.
When I choose a fixed width font, like Courier, the printing becomes too slow!!!
Any Idea?
My code looks like that :
private int sizeFont = 10;
private font myFont = new Font ("Courier", Font.PLAIN, sizeFont);
public int print(Graphics g, PageFormat pf, int indice)
Graphics2D g2=(Graphics2D)g;
while(myCondition){
g2.drawString(myString,0,0);
g2.translate(0,this.sizeFont);
return Printable.PAGE_EXISTS;If it interests someone, I have found a solution :
do not use "Courier", but "Courier New" . -
I am having trouble with disk space,
I am having trouble with disk space, I am always getting the error message that I need to delete files on my start up disk, I am all out of space. I cant even save a file to my desktop without getting the message, Is there a way I can free up space. I am not very computer savvy, being a pensioner I cannot afford expensive options. I was familiar with the old apple imac, but I was given a macbook pro for my birthday, and am trying to work it out. I use it mostly for photos and web.
Jillian,
I'm assuming this is a second-hand machine. If it is brand new, get it to Apple because it's their problem, not yours.
First thing you should do is go to Programs: Utilities: Disk Utlity and choose "Repair Permissions." If you don't have the OS X system disk (a DVD) go ahead and verify the Disk. It can't fix itself, so to speak, but can tell you if there is a problem. iIf you have the OS X system disk then boot off the disk, go to Disk Utility, and run Repair Disk. Assuming all is OK:
You don't need to download any programs to get started on figuring out why all your space is gone. Try this first:
Oh, when deleting, especially at first, you may have to move only small folders or even files, of 100 MB or so to the trash, then empty the trash. As the free space increases, you can trash progressively larger files. To delete files, the computer needs to create even more files to tell it what files it is deleting before it deletes them. I know, go figure.;)
It would not be a bad idea, and is in fact a very good idea, to run the disk utility "Repair permissions" after every half-dozen trash/empty trash cycles and then restart the computer.
The basic plan is to search for unreasonably sized folders.
From the Finder:
Open a window, click in the window and then:
Go to menu item View. (If you click on the desktop instead of a window, you'll get a different set of view options, none of which is the one you want.)
Click on it and move the cursor to the bottom choice, Show View Options (alternative Apple (Command)-J). Make sure the checkbox "Calculate all sizes" is checked. If it isn't, check it and then click on "Use as default" When checked, it will show you the size of a folder. If it was unchecked, don't be surprised if nothing seems to be happening as it will take awhile for the computer to calculate the size of, literally, thousands of folders. But some will start to show up right away. If you open a new window and don't see any folder sizes, Repeat the Show View Options routine above and if Calculate all sizes is checked, just wait.
I've heard you Aussies enjoy a beer or two. If your Mac has to calculate all the folder sizes, this might well be a good time to have a cold one or two, as it will take some time.
Go to the root level, which is "Computer" or "_Your Disk Name_," generically Macintosh under Devices in the sidebar.
Make sure you are in list view and can have the size column visible. Click on it (turns blue-grey) and it will sort by size, large to small or the reverse. Click again to reverse the sort order.
On my 10.6.8 machine, I have
98 GB under Users.
22 GB under Applications. If you only have the Apple-supplied applications, you probably have between 4 and 6 GB here.
Library is 24.5 GB
System is 4.6 GB
Other than a few trivially small files or folders, that should be about it for the root level.
If you have two System files, you shouldn't, and will need to get rid of one. Ask for advice before deleting one or the other. If you have a, "Previous System," or "Old System," -- can't remember the language, you can proably safely delete it if you are satisified with how your computer is working.
The Library is a candidate for bloat. Some applications, especially those that manipulate audio or video, store the bulk of their code, generally resources of one type or the other, in the Application Support folder. For instance, I have a 10.5 GB folder of Live Type in my Application Support folder. Honestly, I don't know what program it is for, but don't care because I upgraded to a 3/4 TB drive. In contrast, on my 10.7.1 computer, which has little more than the Apple supplied software on it at this point, uses only 1.5 GB for Application Support. The support folders will remain even if the program itself is deleted. As a general rule, I wouldn't bother checking out anything under 300 MB or so. Any folders over that, you should note for possible deletion _but_ be sure to ask someone with more knowledge about this what it is used for before deleting. If it is used for some program that isn't on your machine, meaning the program has been deleted, you can safely delete it. If the program is still on the machine, decide if you will use that program and, if not, delete the program and its application support files.
My next largest folder in the Library is Audio at 2.7 GB. I have audio editing programs, so that makes sense. You probaby have one also, but shouldn't be over 500 MB or so.
Next is Printers at 1.4 GB. This is a good place to clear up space. You'll see folders with various printer brands. Do you have a Brother printer? No? Trash it. Just keep the folder with your printer brand and the PPD folder and trash the rest. If you want to get real fancy, open your brands folder and delete the files for every model other than the one you have.
My next largest is Fonts at 490 MB. Leave that alone. In fact, unless Fonts is something insane like 2 GBs, stop deleting from the Library.
Go to Users. There could be between one and more than one user. (Fudge of an answer there.) There is no such thing as a guideline for user folder size. Is there a previous user? If so, check with them and see if you can delete it. I have a "dummy" administrative - level user that can be used for some esoteric rescue operations and it takes up a trivial 33 KB or something like that while my own account is pushing 100 GB.
You'll see several folders, Music, Pictures, Desktop, etc. This is stuff you or the previous user have created. If you don't want it, delete it. You will also see, aha! another Library folder. There shouldn't be many folders over 100 MB here except for Mail and our friend Application Support. I get a lot of mail, rarely delete any, and have carried it over from 10.3 and measures out at 3.7GB. Still, if its someone elses mail and you don't want it, you can delete it, but again, check with more knowledgable people as there are probably some files and folders you absolutely should not delete, others that you should delete from within Mail, and some you can manually delete.
My Application Support Folder weighs in at 1.4 GBs, of which 1.2 GBs is for Final Vinyl. That's a lot. Sneaky sucker stored some untitled audio files in there. Bye! OK, now the Application Support folder is down to 145 MB. So, I'd say anything much over that should be investigated for possible deletion. Close up Library and move on.
Downloads may be very small or very large. Depends on how meticulous the previous user was in deleting or moving to a more appropriate location. Ask them if there is anything they want, and if no, delete it.
My Application folder has Zero KB because I always install at the root, administrative level. If there is anything there, figure out if you want to use it or not. If not, trash it.
Overall:
1) Don't sweat the small stuff. The days are long gone when searching a hard drive for a 100 K file to delete is worthwhile.
2) Start small. A disk that full is going to be pretty touchy, so once you have identified a bloated folder, go inside of it and trash the smaller files and folder, then empty the trash, then delete a few more files, empty the trash, etc.
3) Don't forget to periodically Repair Permissions and restarting the computer.
4) If you are unsure about whether a folder or file can be safely deleted, ask someone knowledgable or just knock off for the day and hit it again tomorrow. Seriously, an unanswerable question you have might well be answered by sleeping on it and attacking it the next day.
5) As Douglas Adams wrote: DON'T PANIC!
Best of luck!
Chris -
Automated fixed spaces in certain positions (Czech)
In Czech (and it might be similar in other lanugages too) it is not possible to end a line with a single-letter words (such as preposition: v, k, o etc.). Writing programmes (such as MS Word) usually solve this by automatically entering a fixed space after these single-letter words when writing in Czech. I was wondering whether there is a setting in Pages that allows you to make this automatic too?
In Czech (and it might be similar in other lanugages too) it is not possible to end a line with a single-letter words (such as preposition: v, k, o etc.). Writing programmes (such as MS Word) usually solve this by automatically entering a fixed space after these single-letter words when writing in Czech.
Could you explain/enlarge, please?
If one inputs a single letter word, first, one presses the space bar which will input U+0020 SPACE before; second, one inputs the one character word; and, third, one presses the space bar which will input U+0020 SPACE.
If there is more than one character U+0020 SPACE after a single letter word, or if e.g. U+200A HAIR SPACE, U+2009 THIN SPACE, U+2008 PUNCTUATION SPACE, U+2007 FIGURE SPACE, U+SIX-PER-EM SPACE or other space characters, then there is a problem.
Other than a single word space at the orthographic level, spacing should be handled at the typographic level. If an authoring application achieves spacing by modifying character information instead of by modifying imageable composition, then it is a bug, no?
/hh -
Adobe Pro XI deletes and/or replaces letters with blank spaces or an x
How do I fix the problem where Adobe Pro XI deletes and/or replaces letters with blank spaces or an x.
This is really annoying to have to go back to each thing I type into a document and re-choose the fonts to get them to be correct.
Thanks for your help!Adobe is a company, not a program... do you mean ACROBAT Pro?
If yes, this is the Premiere Pro video editing forum, you need to go to http://forums.adobe.com/community/acrobat -
I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages. If I type it won't continue in Hebrew. I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste. Does anyone know how to fix this? I use an older MacBook running OS 10.9.1. I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.
Just clarifying:
Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
Pages 5 has much better support but with bugs.
If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
As Tom recommends the only real solution on the Mac is Mellel.
Peter
btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
Peter -
Adobe Indesign 2014 CC export epub with Fixed Layout
When I export a book with he new beautiful new export filter "E Pub with fixed Layout" and send him to the central bookstore in the nederlands... They testing the epub and give tree errors
Filename contains spaces, (this i can repair, but many work)
date value '19-06-2014' does not follow recommended syntax as per http://www.w3.org/TR/NOTE-datetime:19-06-2014 class java.lang.IllegalArgumentException DAY_OF_MONTH, this error i can not place (we work with a dutch system and ist standard setting)!!
item (iTunesMetadata.plist) exists in the zip file, but is not declared in the OPF file, this error i can not place.
Have you a suggestion
GeertBetter explain
http://abrainmisspelled.wordpress.com/2011/12/21/itunesmetadata-plist-epub-validation-erro r-explained/
“item (iTunesMetadata.plist) exists in the zip file, but is not declared in the OPF file ”
The issue: If I get this message, it means that I’ve already loaded my ePub into iTunes. iTunes inserts this code automatically into the file. Why? Dunno. Probably something it thinks it needs?
How to solve it:
One way to solve this is to create a fresh ePub version of the file and NOT load that copy into iTunes before running the check. Make a duplicate ePub file of the ebook after it passes the test, and LOAD THE COPY into iTunes, keeping the original file pristine and error-free!’ -
Added fixed spaces in output columns
Hello experts,
how to add fixed spaces in between columns?
i am using concatenated statement.
concatenate... into line separated by... (here i want 8 spaces).
I am uploading data on application server.
how to add fixed spaces??
Thanks in advance.
Saurabh>
saurabh kulkarni wrote:
> Hello experts,
>
> how to add fixed spaces in between columns?
> i am using concatenated statement.
> concatenate... into line separated by... (here i want 8 spaces).
>
> I am uploading data on application server.
>
> how to add fixed spaces??
>
> Thanks in advance.
>
> Saurabh
If you give 8 space characters it would not work. Try '########' or any other character and then use replace statement to replace '#' with ' '. It will work.
Regards,
Prashant. -
t:dataTable scrollable with fixed headers
I need to make my dataTable scrollable with fixed headers, I have seen few solutions like having 2 data Tables one for headers and the other for columns and one more solution is CSS
In the first solution the column widths in the both tables doesn't match( I think this can be fine tuned to have a fixed column size)
Can some one help me out in doing this with CSS.I did some thing like this, please help me out my columns of botht ables doesn't match
<htm:table>
<htm:body>
<htm:tr>
<htm:td>
<t:div>
<t:div>
<t:dataTable
renderedIfEmpty="false"
preserveDataModel="false"
preserveSort="true"
varDetailToggler="detailToggler"
headerClass="alignLeft"
rowClasses="oddTableRow,evenTableRow"
columnClasses="lastName,namePrefix,firstName,middleName,nameSuffix,dirType,orgName,county,city,state,valid,select"
rows="1"
value="#{result.result}"
var="legalProfessional">
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="Last Name" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="Name Prefix" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="First Name" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="Middle Name" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="Name Suffix" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column >
<f:facet name="header">
<h:outputText value="Dir Type" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="Organization Name" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="County" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="City" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="State" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="Valid" style="font-size:8pt;" />
</f:facet>
</t:column>
<t:column rendered="#{resultPage eq resultsBean.pageSearch}" defaultSorted="false" sortable="true">
<f:facet name="header">
<h:outputText value="Select" style="font-size:8pt;" />
</f:facet>
</t:column>
</t:dataTable>
</t:div>
<t:div style="overflow:auto;height:50px">
<t:dataTable
renderedIfEmpty="false"
preserveDataModel="false"
preserveSort="true"
varDetailToggler="detailToggler"
headerClass="alignLeft"
rowClasses="evenTableRow,oddTableRow"
columnClasses="lastName,namePrefix,firstName,middleName,nameSuffix,dirType,orgName,county,city,state,valid,select"
rows="#{sessionUserBean.user.resultsPerPageOption}"
value="#{result.result}"
var="legalProfessional">
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.lastName}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.namePrefix}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.firstName}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.middleName}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.nameSuffix}" />
</t:column>
<t:column >
<h:outputText value="#{legalProfessional.directoryType}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:commandLink action="#{legalOrganizationSearchByNameBean.searchLegalOrganizationsByName}">
<h:outputText value="#{legalProfessional.relatedOrgNormName}" />
<t:updateActionListener property="#{legalOrganizationSearchByNameBean.name}" value="#{legalProfessional.organization}" />
<t:updateActionListener property="#{legalOrganizationSearchByNameBean.resultKey}" value="#{legalOrganizationBean.legalOrganizationsSearchResultKey}" />
</h:commandLink>
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.county}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.city}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<h:outputText value="#{legalProfessional.normRegion}" />
</t:column>
<t:column defaultSorted="false" sortable="true">
<t:graphicImage value="images/yellow_check.jpg" border="0" />
</t:column>
<t:column rendered="#{resultPage eq resultsBean.pageSearch}" defaultSorted="false" sortable="true">
<t:commandButton
id="viewLegalProfessionalCommand"
forceId="true"
title="#{bundle.view_entity_title}"
value="#{bundle.text_view_value}"
action="#{legalProfessionalBean.actionGotoView}">
<t:updateActionListener property="#{heavyWeightBean.uuid}" value="#{legalProfessional.profileUuid}" />
<t:updateActionListener property="#{legalProfessionalBean.LPAEntity}" value="#{legalProfessional}" />
</t:commandButton>
</t:column>
<t:column rendered="#{pageStatus eq resultsBean.pageAdd || pageStatus eq resultsBean.pageEdit}">
<!-- Employment relationship with general -->
<t:commandButton
title="Make Employment Relationship."
rendered="#{result.key eq legalOrganizationBean.legalProfessionalsResultKey}"
value="Employment"
action="#{legalOrganizationBean.actionMakeEmploymentRelationship}">
<t:updateActionListener property="#{legalOrganizationBean.selectedLPAEntity}" value="#{legalProfessional}" />
</t:commandButton>
</t:column>
</t:dataTable>
</t:div>
</t:div>
</htm:td>
</htm:tr>
</htm:body>
</htm:table>{.lastName{
width:100px;
.namePrefix{
width:100px;
.firstName{
width:100px;
.middleName{
width:100px;
.nameSuffix{
width:100px;
.dirType{
width:100px;
.orgName{
width:100px;
.county{
width:150px;
.city{
width:250px;
.state{
width:100px;
.valid{
width:100px;
.select{
width:100px;
code}
Maybe you are looking for
-
Can I install a SECOND HARD DRIVE (ssd) on my x220i
For some reason I'm having problems finding the answer to this. I would like to install an ssd, but I would like to keep the existing hard drive for space. Is the a way to install a second hard drive (an ssd) into the x220i? Thanks for any input!
-
Distribution Manager Failed To Access The Source Directory
Hello All, I have this issue distributing content to my Distribution Points for months now. I keep running into this error below: Distribution Manager Failed to Access the source directory (\\share\folder\file.wim) Possible Cause: Distribution Manage
-
How to redeem iTunes gift card purchased in USA from India
How to redeem iTunes gift card purchased in USA from India
-
My iphone isnt recognized by my computer
I am sure this has been asked a million times, but I have checked all connections and nothing works. I am trying to set up a new IPhone because my old phone's camera doesn't work anymore. I just want to save my pictures! Please help??
-
SendAndLoad data retrieved, but unevaluatable
Hello all, sorry if this is a repeat, I did not find a similar post in an 1/2 hour of searching I'm using sendAndLoad, everything seems to work fine in that I get all my variables and can trace them and put them in text fields. When I try to evaluate