SPAM update problem

In am trying to update SPAM form ver 7.0/21 to 7.0/26.
I am in client 000
update is giving error message
Error Phase IMPORT_PROPER
Reason of error TP_STEP_Failure
Return code 0012
Error message OCS package SAP tp step 'H' retuen code 12

hi,
please kindly give the full error message in detail and what support package you will update.
thank you.
please review :
Note 782140 - OCS: Known problems with Support Packages in Basis Rel. 6.20
Note 672651 - OCS: Known problems with Support Packages in Basis Rel.6.40
Note 173814 - OCS: Known problems with Support Packages for Release 4.6
related with error message IMPORT_PROPER ,please check your kernel patch level as explained on one of mentioned SAP Notes that suits your system. Stated there that you need to upgrade kernel patch level.
hope it helps.
rgds,
Alfonsus Guritno
Edited by: Alfonsus Guritno on Jul 4, 2008 9:38 AM

Similar Messages

Problem with spam update

Hi,
I have some problem with SPAM update.
my SPAM version is 620/patch level is 23 on kernal 620.
I was upgraded my kernal from 620 to 640.
after that i downloaded the SPAM (SAPKD64023) from marketplace, and uncar that patch by using sapcar xvf. After that I went to transaction SPAM and selected option spam/saint update, then I am getting error called
*spam/asint update SAPKD62023 has already been imported successfully
*so please tell me how to update SPAM version from 620/23 to 640

Hi
I got your question to some level & from 4.7 onwards Basis Abap & Spam/Saint are segregated to one release.
so for ex- sapkb620**
sapka620**
sapkd620** & when it comes application
sapkh470**
sapke470**
from the above examples 620 indicates version release of Basis Abap & Spam/Saint
& 470 indicates Aplications & HR release
where as you can notice in 4.6b every thing is in on platform
sapkb460**
sapka460**
sapkh460**
sapka460**
Thanx & regards,
Rahul

SPAM Update 30 Problem

Hello!
I have a little problem with my SPAM Update.
I have two new installed ECC 6.0 systems (ABAP Stacks), one is the DEV system and the other one is the QAS system. The DEV system is the transporthost. On the DEV system all SPs are imported.
Now I want to import the SPs in the QAS system, too. All SPs were loaded successfully into the QAS system from the DEV system/trans directory.
First I wanted to import the SPAM 30 Update. But it "crashed" at one point ( "Check requirements" - "R3trans DB connect finished with return code 0"). There it is running and running and....and nothing happens. I stopped the transaction.
Checking the tp log:
Error: Cannot remove
<devhost>\sapmnt\trans\tmp\C081028.<qasSID>
The authorizations of the sapmnt are set according to the installation guide "Preparing the SAP System Transport Host".
Does anyone know what I maybe have forgotten to check or to set?
Thanks in advance!

Hi!
With r3trans -d I got:
This is R3trans.exe version 6.14 (release 700 - 24.04.08 - 14:09:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3trans.exe finished (0012).
And I checked also the tp log again. This time on OS Level instead of in ABAP. The file is last changed on 28th October. So could it be that there are some wrong information stored in some buffers or something?!
@edit
I did not execute this command with the <sid>adm.
Now I did and there was no error.
Just:
This is R3trans.exe version 6.14 (release 700 - 24.04.08 - 14:09:00).
unicode enabled version
R3trans.exe finished (0000).
Edited by: Geraldine P. on Oct 30, 2008 1:38 PM

Spam update

hi
when i am trying to uddate spam from 18-29 it gives me following error
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
 - Error in phase: IMPORT_PROPER
 - Reason for error: TP_STEP_FAILURE
 - Return code: 0008
 - Error message: OCS Package ALL, tp step "6", return code 0008
Notes on phase IMPORT_PROPER
In this phase repository objects and table entries are imported. This
phase can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called.
o TP_FAILURE: The program tp could not be executed. For more
 information on this, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: A tp step could not be executed. To find the cause
 of the error, see the appropriate log, such as the import log.
 If the cancelation message contains a tp step 6, N or S, the step in
 question is independent of the transport request. You can find these
 logs under the node Import steps not specific to transport request
 in the log overview.
 Alternatively, you can find these logs in the following files in the logs under the node Import steps not specific to transport request
 in the log overview.
 Alternatively, you can find these logs in the following files in t
 log directory of your transport directory (usually:
 /usr/sap/trans/log):
 - tp Step 6: P<YY><MM><DD>.<SID>
 - tp Step N: N<YY><MM><DD>.<SID>
 - tp Step S: DS<YY><MM><DD>.<SID>
 You can display these files using the report RSPUTPRT or by callin
 transaction AL11.
 A prerequisite of the Support Package Manager is that the Change and
 Transport System (CTS) is configured correctly. For more detailed
 information, read the online documentation available from Help -> SAP
 Library -> mySAP Technology Components -> SAP Web Application Server -
 Change and Transport System .
ours is ecc5.0,oracle datebase
i searched for this error on net after reading several posts i tried to reimport several times but still it gives me the same error
plz help asap
regards

Hi Subash,
Please do the below steps to resolve the issue. Defintely it will works.
1) stop R/3 through MMC
2) put the following environment variables:
2.1) setenv SHLIB_PATH /usr/sap/BSP/sys/exe/run
2.2) setenv dbms_type ora ( if your DB is oracle)
3) start sap through MMC (to take new values of these environment variables)
4) Restart SPAM update.
I guess it will resolve with the NEW environment variable "dbms_type".
Please do that and let me know if still error persists.
Thanks
Kishore

SPAM update - LOAD_PROGRAM_CLASS_MISMATCH

Hello,
I am just preparing for an upgrade to our DEV ECC system.
I have the patches downloaded and ready to go in EPS/In
I've run the SPAM update in the usual way and seen this error:
Runtime Errors         LOAD_PROGRAM_CLASS_MISMATCH
Date and Time          14.04.2014 11:17:56
Short Text
     Class interface was changed at runtime.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLOCS_UI" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator. Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
     The system attempted to correct the error
     automatically, so you should try to restart
     the program.
Error analysis
     The section "PUBLIC" of the interface of the class "CL_OCS_PROCESS_STATUS" was
      changed during
     program flow, which caused inconsistencies at runtime.
     The program "CL_OCS_PROCESS_STATUS=========CP" uses the interface version
      20140414111441.
     The program "SAPLOCS_UI" uses the interface version 20140321151332.
     The internal session was started at 20140414110145.
I have attempted to re-run the SPAM update and it tells me it was already successfully updated. Yet when I attempt to "load packages from application server" it just attempts to upload the SPAM update again with the message that "OCS file already exists in inbox. Upload Not Required"
SPAM cannot see the other patches sat in EPS/In
Does anyone have any ideas please? I'm under pressure here to have this process under way quickly and I've hit a brick wall!
Thanks

I have uploaded the spam package again and tried to re-run the update. This is the message:
When I try upload all the other packages from application server it just tries to upload the spam patch again and nothing else.
And this is a screenshot of my EPS/IN directory, showing just a few of the dozens of patches that are sat in that directory. None of which SPAM seems to be able to see!

SAINT/SPAM Update error

Hii master,
I have a problem SAINT/SPAM update.
I update SAINT/SPAM 7.01/0052
but have a error :
please information resolution master..

Hi
You should re-construct missing object in the application layer, since it is missing & it can be done by any one of the option as below;
1) By re-transport - Check with your ABAP team for the transport, looks like they created this Z index (ZIR) for table IMRG & you can re-import the required transport request.
2) This should be performed by DDIC user, You can re-construct it from SE14 as below; -
SE14 -> objects IMRG --> Edit --> this will display the screen as per Siva's update.
From here, go to Menu opton "Table", then Select "Reconstrct" this should create the missing object at application layer or say runtime objects.
regards
Swami

SAINT/SPAM UPDATE takes longer time more than 12hours

Hi everyone,
I am doing SAINT/SPAM UPDATE version 33 on NW70 systems running on windows 2003 x64 servers with oracle 10g database. The update is running for more than 12 hours and has not finished yet.
Normally SAINT/SPAM update wud take 15 to 20mins. But this is very unusual.
Has anyone faced similar problems before ?
Please suggest solutions if any
thanks
Moses

Check the import monitor and the tp system log to check the status of the patch... please post here any errors found.
Loging using DDIC
ensure 000 client you login
ensure your active login session on CI instance (in case multiple instances)
ensure to shutdown/stop all other instances (Dialog Distances) running on other hosts
This information is inacurate and missleading... You don't need to logon with DDIC you can use any user with the right authorizations, also you don't need to shutdown any instances.
Regards
Juan

Worst case scenario for spam update error

hi friends
i need to know what is the worst case scenario if our support package stack update(SPAM) process fails. I am asking this question because we dont have a DR system.I mean we dont have test server to check our restore & recovery. We have ECC 5.0 and our SPAM updates are long overdue. I need to convince the management to prioritize this activity and my boss thinks that since we dont have test server if anything goes wrong then we might have to restore the db which he is not in favor of.
i would really help if you could provide me some suggestions.
thanks in advance.
regards

Hello Nathan,
Very first you need to convince your management that since you didn't had the Support package update in your system actually you are not having the latest corrections available in the system. As per Best practise you should keep the systems to the latest available support package levels.
Now, to your question.Support package update is a easy but critical activity. Easy because it is bit effortless and critical because major changes are involved with the corrections. UPdate for BASIS support package can bring your system to HIghly unstable state (I am just talking about Worst case scenarios) as they update the system basis tables. Application component packages if aborted due to some errors can have problems in the business cycles.
So anyways you'll have to keep proper backup of your system available just to make sure if, by chance you are not able to complete the SP update under the given downtime window you should have the possibility to restore and release the systems to the business users.
This will not be the new thing you'll be doing as majority of the customers don't have DR server to the rescue.
You can discuss with your team and decide a suitable backup strategy.
I hope it helps.
Best Regards
NIraj

SPAM Update stuck in EPILOGUE phase

Hi,
We were trying to update the SPAM level from 40 to 45 of our R/3 4.6C system. After the SPAM update, we saw an information text saying " The current progam has been modified while running" and then just restarted transaction SPAM. The SPAM level has been updated to 45 but the status got stuck in the EPILOGUE phase with a red traffic light. We checked import/action/tp logs but did not find any errors. We can't find any OSS note as well describing this issue. Can anyone help us with this issue? We cannot proceed with our Support pack upgrade =(
Thanks and God Bless.

Hi Rekka ,
you logoff and login again and run spam again .if still getting same error then lock all users and run the spam .This problem occures while run the spam same time some user working on same program.
please check and give thereward for this.

IDES ERP 2005 / open ABAP dictionary conversion during SPAM Update

Dear all,
First of all, I'm currently busy implementing a educational enviroment for our company, we are using IDES MySAP ERP 2005 SR1 MSSQL.
At the moment we are trying to upgrade the SPAM version from version 20 to 22.
However, during the requirement checks the following error occurred :
Open conversions in the data dictionary
Phase CHECK_REQUIREMENTS: Explanation of Errors
Some open conversion requests still exist in the ABAP Data Dictionary
for the following ABAP Dictionary objects. To avoid inconsistencies and
loss of data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
Phase CHECK_REQUIREMENTS: Open ABAP Dictionary Conversions
Object Type Object Name
Table Index LXE_WRK_4 ~ STA
 SC2T327F363DFA4T ~ ESI
 SC2T327F363DFA4T ~ KYS

It seems that the indexes mentioned above are missing or doesn't exist!!!! i've tried looking for a sap note or a solution on SDN. However, haven't found a solution at all, or I'm looking at the wrong spot.
Is there a note or can somebody provide me what's in the indexes, so i can create it in our IDES system.
Regards,
Yam-Lang Lee

Hi Kiran,
Thank you very much. I managed to create the first index.
However not the indexes on table SC2T327F363DFA4T. Can't find any information for the indexes for this table. Did found note 959811. There it state that de indexes were deleted. But still stuck in the check_requirements of the SPAM Update!
Greetings,
Yammie

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

10.5.7 update problems

After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

jjtopspin wrote:
Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

SPAM update running for a long time in MAIN_IMPORT - NW 7.0 SR3

Hi,
I have installed NW 7.0 SR3 -> AS ABAP. I am trying to update SPAM. My current version is 7.00/0026. I tried updating it to patch level 33 and 36 but during both the updates SPAM is taking an awful amount of time in the MAIN_IMPORT phase. Update to patch level 33 has been running for almost a week now after i used 'R3trans -i' from the command line as a last-ditch effort. a 'trans.log' file is being continuously updated. Any ideas on why just SPAM update is running for so long?
Thanks,
Rense

Below is the latest log of SAPID70033.IDS
4 ETW000 R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 07.12.2010 - 15:30:49
4 ETW000 control file: \\sap\sapmnt\trans\tmp\SAPKKD70033.IDS
4 ETW000 > #pid 4004 on sap (APServiceIDS)
4 ETW000 > import
4 ETW000 > buffersync=yes
4 ETW000 > file='\\sap\sapmnt\trans\data\RD70033.SAP'
4 ETW000 > continuation='\\sap\sapmnt\trans\data\RD70033_#.SAP'
4 ETW000 > client cascade yes
4 ETW000 >
4 ETW000 > excluding 'R3TRDDDD','R3TRDOMA','R3TRDTEL','R3TRENQU','R3TRMACO','R3TRMCID','R3TRMCOB','R3TRSHLP','R3TRSQLT','R3TRTABL','R3TRTTYP','R3TRUENO','R3TRVIEW'
4 ETW000 R3trans was called as follows: R3trans.exe -w \\sap\sapmnt\trans\tmp\SAPID70033.IDS \\sap\sapmnt\trans\tmp\SAPKKD70033.IDS
4 ETW000 Connected to DBMS = ORACLE --- dbs_ora_tnsname = 'IDS' --- SYSTEM = 'IDS'.
4 ETW690 COMMIT "0" "0"
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time        : 07.12.2010 - 15:30:49
4 ETW000 function         : IMPORT
4 ETW000 data file        : \\sap\sapmnt\trans\data\RD70033.SAP
4 ETW000 Continuation     : \\sap\sapmnt\trans\data\RD70033_#.SAP
4 ETW000 buffersync       : YES
4 ETW000 clients          : cascade
4 ETW000 repeatimport     : NO
4 ETW000 repeatclimport   : NO
4 ETW000 c.s.i.           : NO
4 ETW000 l.s.m.           : VECTOR
4 ETW000 charsetadapt     : YES
4 ETW000 def. charset     : WEUROPEAN
4 ETW000 commit           : 100000
4 ETW000 table cache      : dynamic
4 ETW000 EXCLUDING        : 'R3TRVIEW','R3TRUENO','R3TRTTYP','R3TRTABL','R3TRSQLT','R3TRSHLP','R3TRMCOB','R3TRMCID','R3TRMACO','R3TRENQU','R3TRDTEL','R3TRDOMA','R3TRDDDD'
4 ETW000
4 ETW000 clients which are protected against client cascade: 066
4 ETW000
4 ETW000 client cascade to: 000, 001, 800, 810, 811, 812
4 ETW000 Character set on this machine : 2 byte unicode little endian.
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 11.12.2008 at 10:34:54 by k7badm
3 ETW709 "700 "
4 ETW000   with R3trans version: 14.02.08 - 14:55:00
4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7B' --- SYSTEM = 'K7B'.
4 ETW000
4 ETW000 language vector during export: DE
4 ETW000 language vector during export: DE (ISO-DEEN)
4 ETW000 lsm during export: ALL
4 ETW000 datafile was created with 'langdeletions=no'.
4 ETW000 trfunction = D (patch transport)
4 ETW000 switching to selective language import
3WETW000 language '1' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'V' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'W' is installed, but no entries for this language were exported ('DE')
3WETW000 language '3' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'H' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'R' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'U' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'd' is installed, but no entries for this language were exported ('DE')
3WETW000 language '6' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'P' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'I' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'K' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'M' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'Q' is installed, but no entries for this language were exported ('DE')
3WETW000 language '5' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'C' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'J' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'T' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'N' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'O' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'Z' is installed, but no entries for this language were exported ('DE')
3WETW000 language '2' is installed, but no entries for this language were exported ('DE')
3WETW000 language '4' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'F' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'G' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'L' is installed, but no entries for this language were exported ('DE')
3WETW000 language 'S' is installed, but no entries for this language were exported ('DE')
4 ETW000 the following languages will be imported: 1VW3HRUd6PIKDMQ5CJTNOZ24EFGLS
4 ETW000 Used Commandfile SAPKD70033           (SAPUSER/570)
4 ETW000 Target client in E070C updated (   )
4 ETW000   0 entries for E070 imported (SAPKD70033).
4 ETW000   0 entries for E071 imported (SAPKD70033          *).
3 ETW674Xstart import of "R3TRCLASCL_OCS_ENVIRONMENT" ...
4 ETW000   1 entry for TADIR updated (R3TRCLASCL_OCS_ENVIRONMENT                      ).
4 ETW000 REPOS CL_OCS_ENVIRONMENT============CI         A replaced.
4 ETW000 REPOS CL_OCS_ENVIRONMENT============CO         A replaced.
4 ETW000 REPOS CL_OCS_ENVIRONMENT============CT         A replaced.
4 ETW000 REPOS CL_OCS_ENVIRONMENT============CU         A replaced.
4 ETW000   0 d /   0 i /   0 u / 60 = 100% ucf SEOCOMPO
4 ETW000 60 entries for SEOCOMPO imported (CL_OCS_ENVIRONMENT            *).
4 ETW000   0 d /   0 i /   0 u / 60 = 100% ucf SEOCOMPODF
4 ETW000 60 entries for SEOCOMPODF imported (CL_OCS_ENVIRONMENT            *).
4 ETW000 no entries from SEOCOMPOEX (CL_OCS_ENVIRONMENT            *) deleted (table is empty).
4 ETW000 no entries from SEOCOMPOEX (CL_OCS_ENVIRONMENT            *) deleted (table is empty).
4 ETW000   0 d /   0 i /   0 u / 60 = 100% ucf SEOCOMPOTX
4 ETW000 60 entries for SEOCOMPOTX imported (CL_OCS_ENVIRONMENT            *).
4 ETW000   0 entries from SEOIMPLREL (CL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SEOIMPLREL (CL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SEOMETAREL (CL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SEOMETAREL (CL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 d /   0 i /   0 u / 45 = 100% ucf SEOSUBCO
4 ETW000 45 entries for SEOSUBCO imported (CL_OCS_ENVIRONMENT            *).
4 ETW000   0 d /   0 i /   0 u / 45 = 100% ucf SEOSUBCODF
4 ETW000 45 entries for SEOSUBCODF imported (CL_OCS_ENVIRONMENT            *).
4 ETW000 no entries from SEOSUBCOEX (CL_OCS_ENVIRONMENT            *) deleted (table is empty).
4 ETW000 no entries from SEOSUBCOEX (CL_OCS_ENVIRONMENT            *) deleted (table is empty).
4 ETW000   0 d /   0 i /   0 u / 45 = 100% ucf SEOSUBCOTX
4 ETW000 45 entries for SEOSUBCOTX imported (CL_OCS_ENVIRONMENT            *).
3WETW000 different nametabs for table SPROXDAT (field IFR_TEXTID).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table SPROXDAT (field IFR_MINOCC).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table SPROXDAT (field IFR_MINLEN).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table SPROXDAT (field IFR_NILLABLE).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table SPROXDAT (field IFR_ACTIONCODE).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table SPROXDAT (field R3_DTREF).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table SPROXDAT (field ENUMTYPE).
4 ETW000       Field is not in NTAB.
4 ETW000      table SPROXDAT: entry in DB is 136 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
4 ETW000   0 entries from SPROXDAT (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SPROXDAT (CLASCL_OCS_ENVIRONMENT            %) deleted.
3WETW000 different nametabs for table SPROXHDR (field ENH_HASH_ID).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table SPROXHDR (field VERSION_ID).
4 ETW000       Field is not in NTAB.
4 ETW000      table SPROXHDR: entry in DB is 144 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
4 ETW000   0 entries from SPROXHDR (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SPROXHDR (CLASCL_OCS_ENVIRONMENT            %) deleted.
3WETW000 different nametabs for table SPROXLPT (field FUNCTION).
3WETW000 key field truncated
4 ETW000    Existing Field Imported Field
4 ETW000      keypart: 'X' 'X'
4 ETW000      format : 'C' 'C'
4 ETW000      len    : 030 120 (chars)
4 ETW000      offset : 035 035 (chars)
3WETW000 different nametabs for table SPROXLPT (field FEATURE).
3WETW000 toggled key fields
4 ETW000    Existing Field Imported Field
4 ETW000      keypart: 'X' 'X'
4 ETW000      format : 'C' 'C'
4 ETW000      len    : 128 128 (chars)
4 ETW000      offset : 065 155 (chars)
3WETW000 different nametabs for table SPROXLPT (field PROPNUM).
3WETW000 toggled key fields
4 ETW000    Existing Field Imported Field
4 ETW000      keypart: 'X' 'X'
4 ETW000      format : 'N' 'N'
4 ETW000      len    : 004 004 (chars)
4 ETW000      offset : 193 283 (chars)
3WETW000 different nametabs for table SPROXLPT (field PROFILE_URI).
4 ETW000       Field is not in NTAB.
4 ETW000      table SPROXLPT: entry in DB is 688 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
4 ETW000   0 entries from SPROXLPT (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SPROXLPT (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SPROXREG (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SPROXREG (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SPROXSIG (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SPROXSIG (CLASCL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SEOREDEF (CL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SEOREDEF (CL_OCS_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SOTR_USE (LIMUCPUBCL#_OCS#_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SOTR_USE (LIMUCPUBCL#_OCS#_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SOTR_USEU (LIMUCPUBCL#_OCS#_ENVIRONMENT            %) deleted.
4 ETW000   0 entries from SOTR_USEU (LIMUCPUBCL#_OCS#_ENVIRONMENT            %) deleted.
Thanks,
Rense

SPAM update problem

Similar Messages

Maybe you are looking for