Spam/Virus Statistics or Report per Users.

Is there any workaround to generate a spam statistics/report per
users? so we could send our users report about spam/virus that
access to their account.
Thanks.

The 'monitor -> internal users' page in the Ironport WebGUI gives you user mail flow details for internal users(both inbound and outbound email). You can search for a specific user and obtain user specific stats. Also, these reports may be imported to CSV format if you need to plot them separately.

Similar Messages

  • Can we save the printing preference of FR reporting per report per user?

    We are using Hyperion Planning and Financial Reporting version 11.1.1.1. Some of our users will generate PDF for printing (HTML format is badly printed out).
    However can we have the option to save the printing preference of each FR report? As some reports are in portrait and some are in landscape format, it is preferred users can setup the printing preference per user per report so that they can choose the paper size and printing orientation.
    Thanks in advance!

    OK; should this be submitted to http://developer.apple.com/bugreporter/?
    I'm unsure about the best setup for this, but here is some brainstorming:
    - In Workgroup Manager or Directory, an administrator can designate a user to 'auto-accept' invitations if the user is available at that time.
    - Ideally, one would be able to establish an ACL for auto-acceptance, so that a user or admin could designate a list of users/groups from whom a user should auto-accept invites.
    - If a user is set to auto-accept, it is reasonable to assume that this user is either unable to use iCal or does not regularly check their calendar, so invites that are not auto-accepted should be handled somehow. For example, a notification could be e-mailed to the user, an invitation accept/decline message could be sent to the iCal account of a designated administrator or delegate, etc.
    I am imagining this for the case of my division, in which we have one person scheduling for lots of people, but I think that the idea of being able to delegate a person to be able to add things to one's calendar without confirmation and to confirm invites from non-privileged users would be useful in other cases as well. For example, a boss wants an administrator/secretary to be able to schedule things on his/her calendar, but does not want this person to be able to see all of the details of existing items on that calendar. I suppose that in this case it would be unclear to which calendar the designate should add the event initially, but I'm sure that for many people the privacy of the boss's calendar is more important than the inconvenience of having to create a throwaway calendar for events created by the delegate.
    If anyone has any thoughts to help refine this, please let me know and I will incorporate that into my writeup.
    Thanks,
    Greg

  • BOXIR3.1- Users, Auditing DB statistics of Report Refresh,users login info

    Hi All,
    I need to create BOXI R 3.1 DeskI reports for the statistics related to the user login information,Scheduling Reports info,user properties and other statistics .
    Any suggestion to resolve this issue , It helps me greatly.
    Thanks in advance..
    mahesh

    Have you tried auditing?
    That way you can get information about different kinds of information. You can install the example reports with some useful reports (average of users logged in, and so on)
    For more information, read the BOE Administrator Guide 3.1 chapter 12.
    In BOE 3.1 you have to configure the connection to your database (create a new repository from the
    CMC), to install the auditing universe and you can install some example auditing reports.
    You can get the universe (if depends on the database you are using) and the example reports (webi) in this folder from the server:
    C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Samples

  • Saving report per user

    Hi All,
    I have developed an interactive report. There is a save option, but when I click on that it says "This report will be saved for all users" How can I make the report save per user?
    -Vatsa

    1. Yes that user will need an account that way there is a unique user id associated with the IR report parameters.
    2. The reason it is says that is because you picked save as default report for all users. That is the report everyone will initially see. After you have created a login for the user, log in as that user. Then modify the IR as needed. Lastly click the gear and then click save report. there will be a dropdown to choose to save as a named report. Choose that and then the report will be saved onto a second tab viewable ONLY BY THAT USER.
    Please let me know if you need anymore help.
    -Ghoulies

  • "Low-level" authorizations for accessing BW reports - add users to role

    Using the advice in Topic "Low-level" authorizations for accessing BW reports, I have been able to publish a query to a role that has 3 test users and each user gets the same query but with different data, as determined in the tables.
    Is there a way to look up the users and e-mail addresses from a table and associate them to the role? We have several hundred e-mail recipients that will not need BW access, but only need an e-mail with a static report that contains data on their own territories.

    Hi!
    i think programatically it might be complex. You got to maintain a seperate variant of report per user and use this variant to send mail. that means you need to maintain a variant and a Broadcast setting per user. once maintained you can use it any number of times the values will be recalculated everytime.
    with regards
    ashwin
    <i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN.  you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

  • Spam & Virus check only - no user accounts

    I am trying to use one of my OS X Server boxes as a spam/virus filter only. I want it to listen on port 25 and relay to the same machine port 325 to hit another SMTP server. I have entered all of my domains and sub-domains into the virtual domains screen. I have not set up any user accounts.
    I see that I can set outgoing SMTP relaying through the GUI and it does seem to accept xxx.xxx.xxx.xxx:325 as a format - but I am not sure that this is legal. Is it? I also found in the archives that this may have to be hand written into the config file as the GUI does not enter relay values correctly. Is this still true in 10.4.4?
    How do I force all incoming mail to pass through the server and automatically send on to the outgoing SMTP. This is kind of like a backup mail server that accepts mail and relays it on when the primary comes back on line. Please point me to the config file if that is where I need to be editing.
    Dean
    Dual G5 2GHz Mac OS X (10.4.4)

    I continued work on this issue today. First, I checked and the three User account folders were present in the Users folder along with the one new account created as part of the Mac OSX Tiger A&I. For some reason, not one of these 4 was accessible from the Login screen; it acted exactly if there were no user accounts.
    Purchased and installed DiskWarrior 4 on the FW drive and rebuilt the directory of the iMac's internal drive. Ran all other tests available w/ DW. Still no joy on logging in. I should NOT have had to see the Login screen at all if the new user had been created properly.
    Punted. Copied everything I thought I would need to the external drive, then did an Erase & Install of OS X Tiger. Applied all updates, no problems logging in. Copied all the original User/username files and folders and restored a few apps.
    Finally, after much wasted time, I have all but one App running and all data files, folders, pics, music restored.
    Adobe Photoshop Elements 3.0 fails because I apparently failed to save a .plist file somewhere and now I learn too late that PE 3.0 will not install on a 10.4.x system. Sigh.

  • Does the Airport extreme provide any sort of usage reporting? Either per user or aggregate usage of the broadband port

    Does the Airport extreme provide any sort of usage reporting?  Either per user or aggregate usage of the broadband port

    No. You may be able to retrieve that information from your ISP.

  • Spam / Virus / Mail Reporting Tools

    Does anyone have an recommendations on how i find the stats for what the Leopard mail server is upto? Just daily reports on the volumes of mails / spams / virus scans would be great.
    Thanks.
    N.

    I second pterobyte's suggestion of mailgraph. It took me about 5 minutes; about as painful as a bandaid. And the resulting database can be parsed and mailed a million was with rrdtool. A big benefit that may make it worth it to you is that it handles the time data; any other script you put together will have to keep track of what it has and hasn't seen, etc. where with mailgraph and rrdtool you can whip up a command line that summarizes running-average data and mails it to you (optionally with attached images).
    That said, if you really want something else, I imagine they exist. I have run several other mail log analyzers (that's a good search term) that work passably well. None were as nice as mailrrd, though.

  • Report and user statistics display in Obiee report

    I have a requirement in OBIEE like i need to generate a report and that report has to display some valuable information dynamically.
    The report consist following column info...
    Report Name|Report Folder|Report Path|Description|Description ID|Owner|Subject Area
    Header 1
    Header 2
    Header 3
    Header 4
    Header 5
    Header 6
    Header 7
    Header 8
    Header 9
    Report Name
    Report Folder
    Report Path
    Table
    user
    Unused ColumnIDs
    Column Created
    Report Creator (user)
    Report last modified
    like etc..........
    SO, the above said fields has to be update and provide dynamic data in the report. (Also those  field info is not available in Usage tracking table so we need get those information from Catalog manager also...........)
    For this I have one alternate idea like to get the solution by planning to get this solution by CSV file.If you would provide any solution like CSV get updated dynamically from Catalog manager it would be a great thing to me....Your help is highly appreciated.
    How to implement this requirement ............could you provide a right path to achieve this solution.
    I hope yours alternative solution.

    Thanks for the reply Yannick.
    We have install/configure WebCenter analytics and activity graph.
    Wehave added Login Metrics in our Group Space and we are getting default login count for specific time frame but when we define a filter under User Property of any property like city, department name, phone title etc after refreshing data it is giving error like
    WCS#2011.03.31.12.47.31 : Irresolvable error(s) occurred. You may want to contact Administrator with the error reference.
    Please help how to solve this.

  • How to control number of rows displayed in a report  by user?

    Hi All!
    I have provided a select list called 'Number of rows' in my report page.User can choose any number in the list, and accordingly he should be able to see so many number of rows in that report page.
    For example: if user selects 50 from the list, he will be able to see 50 records at a time out of say 2000 records retrieved. I want to control number of rows displayed per page dynamically. And if he selects 25 in the select list, he should be able to see 25 records at a time out of 2000.
    How to do it? Please give me ideas.
    Thanking in advance.
    Regards,
    Deepika.

    Hi Deepika,
    If you have a Select List with Submit called, say "P1_ROWS", you just enter P1_ROWS into the Report Attribute's "Number of Rows (Item)" setting.
    Regards
    Andy

  • How do I report a user or violation of the Agreement?

    User hakinianzfromhakinianz is posting multiple spam threads and I want to know how I can report this user/their posts.
    Do I have to be a certain level to have this privelege?
    Here is the profile: https://discussions.apple.com/people/hakinianzfromhakinianz?view=overview

    d6d24r94 wrote:
    User hakinianzfromhakinianz is posting multiple spam threads and I want to know how I can report this user/their posts.
    Do I have to be a certain level to have this privelege?
    Here is the profile: https://discussions.apple.com/people/hakinianzfromhakinianz?view=overview
    Is reported to host.
    You may also report by yourself. Right hand up "report abuse" near "email notification"

  • Windows Installer repair issue for per-user folders/files

    Intro:
    I have doubts that this is the right place to ask about this, since this issue has existed for me on many windows platforms, please suggest where this should be forwarded if this is an inappropriate place to ask.
    Please do not be confused by the directory paths for XP, this issue is also true for Windows 7.
    Description:
    Windows Installer does not repair files in per-user directories, such as [AppDataFolder], when initial installation is performed using system account (for example - distributing the package through SCCM or using psexec) and repairing under a user with administrative
    privileges (limited user repair works fine).
    Example.
    .msi installation installs a custom .xml configuration file to "[AppDataFolder]". We're installing .msi by using psexec /s. log output:
    MSI (s) (D8:F0) [15:19:01:214]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=58982400,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
    MSI (s) (D8:F0) [15:19:01:214]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
    To be installed; Won't patch;
    No existing file
    MSI (s) (D8:F0) [15:19:01:214]: Source for file 'customXML' is compressed
    MSI (s) (D8:F0) [15:19:01:230]: Note: 1: 2318 2: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML
    When a user with administrative credentials accesses the advertised shortcut repair is run on the component that has the .xml configuration file, event viewer has an entry about this.
    The verbose repair log file shows the following entry:
    MSI (s) (D8:E4) [15:22:27:667]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
    MSI (s) (D8:E4) [15:22:27:667]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
    Won't Overwrite; Won't patch;
    Existing file is unversioned and unmodified - hash matches source file
    Limited user repair log reads:
    MSI (s) (78:8C) [15:26:27:406]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
    MSI (s) (78:8C) [15:26:27:406]: File: c:\Documents and Settings\test\Application Data\customXML;
    To be installed; Won't patch;
    No existing file
    Your suggestions will be very much appreciated.

    Hello,
    Did you ever get to the root cause of this?
    I have a similar problem with a custom XML that is reported as "empty or is not a xml file." in the logs.
    Wondered if you had found the root cause?
    Kind regards,
    Sio.

  • Label report with user defined input -

    I am trying to make a report that will print out the data onto avery labels 5163(which is 2 across u2013 5down =total 10 labels per sheet) with my information.  The program already sets your boundaries for the labels so thatu2019s not a issue. 
    My current select statement works somewhat : if I enter 1 inventory.itemnum and whatever qty I want it prints fine.  However when I enter multiple inventory.itemnums it prints each one of those itemnums at whatever qty I enter in the second parameter. So say I enter 2 itemnums and enter qty 2 to print- I get 2 labels of each item num.  Currently I this format I have the second parameter set to NOT allow multiple fields u2013 however when I change this to allow my report fails u2013 please see my info and layout stuff below
    Here is what I have:
    INVENTORY.ITEMNUM} = {?Control Id:} and
    {Sheet1_.Column1} <= {?number of labels}
    Inventory.itemnum u2013field from database
    {?Control Id:}---parameter 1
    {?number of labels}---parameter 2
    {Sheet1_.Column1}----excel table brought in as secondary database to serve as count feature for report u2013 currently set at 20 but can change from 20 to 10 or higher- whatever qty I want.  The most labels I will need for any 1 item is 24 u2013 but I can print 2 sheets of 10 then 1 of 4 if we reduce it to qty 10 in the table.
    I have 2 parameters that prompt for data
    Parameter 1: it prompts for .itemnum (I have this parameter set to allow multiple inputs of inventory.itemnum)
    Parameter 2: it prompts for qty of labels needed. currently not set to allow multiple numbers as I get a failure when I change my parameter to this.
    As my info above sits I can enter 1 random inventory.itemnum (parameter 1) and  a qty (parameter 2)(1-20 u2013 which is set by a table I built in excel 1-20 u2013 above which is sheet1_.column1)
    What I want to be able to do is
    1.     (Parameter 1 here)Enter inventory.itemnums from random  qtyu2019s of 1-10 at any given input time from user prompt in parameter
    2.     (parameter 2 here)Print label of qtys ranging from 1 label per each item to as many as 10 labels per item
    a.     For example: I enter
    b.     Parameter 1:
    c.     Xitem1.itemnum
    d.     Xitem2.itemnum
    e.     Xitem3.itemnum
    f.     Parameter 2:
    g.     Qty 1- is the amount of labels needed for xitem1(from parameter 1)
    h.     Qty 3- is the amount of labels needed for xitem2(u201C u201D)
    i.     Qty 6- is the amount of labels needed for xitem3(u201C u201C)
    3.     I need the qtys in parameter 2(labels to print) to work with the inventory.itemnums as they are entered in parameter 1.
    I have tried using arrays but they force me to use the same amount of data that I have clauses. Which does not work because I have varying amounts of labels needed at different time-If I have  2 labels and have more clauses than this the report fails. I will not always have 2 or 3 labels to make maybe more maybe less.
    Here is a example of what I was trying with arrays:
    {field.xitem}=(?item.num)[1] and
    {?qty}[1]>={numbertable.number})or
    {field.xitem}=(?item.num)[2] and
    {?qty}[2]>={numbertable.number})or  etc.,etcu2026u2026
    This would force me to input as many item.itemnums and qty labels as there are arrays or the report would fail.
    Edited by: max274 on Mar 30, 2009 3:11 PM

    max40385
    SELECT "INVENTORY"."ITEMNUM", "INVENTORY"."ORDERUNIT",
    "INVENTORY"."BINNUM", "INVENTORY"."MODELNUM",
    "ITEM"."DESCRIPTION", "POLINE"."ITEMNUM", "POLINE"."ENTERDATE",
    "POLINE"."PONUM", "POLINE"."ORDERQTY"
    FROM   "MAXIMO"."INVENTORY" "INVENTORY",
    "MAXIMO"."POLINE" "POLINE", "MAXIMO"."ITEM" "ITEM"
    WHERE  ("INVENTORY"."ITEMNUM"="POLINE"."ITEMNUM") AND ("POLINE"."ITEMNUM"="ITEM"."ITEMNUM") AND
    "POLINE"."PONUM"='24142' AND "POLINE"."ITEMNUM"='1201020021N'
    EXTERNAL JOIN POLINE.ORDERQTY>={?C:\Documents and Settings\kpowell\My Documents\test table.xls: Sheet1_.Column1}
    *****************my counting table here********
    C:\Documents and Settings\kpowell\My Documents\test table.xls
    SELECT `Sheet1_`.`Column1`
    FROM   `Sheet1$` `Sheet1_`
    WHERE  `Sheet1_`.`Column1`<={?max40385: POLINE.ORDERQTY}
    Here is my select statement
    POLINE.PONUM} > "23000" and
    {POLINE.PONUM}={?My Parameter} and
    {POLINE.ITEMNUM}={?Control ID}AND IF
    {POLINE.ITEMNUM} in ["1107011010N", "1201020021N"]THEN
    {?Control ID}*({@qtY})
    my label printing works except when I  my inventory item conversion is like the exmaple below - this is trying to get my label program to work
    but i want to add some execeptions to my statement currently the
    link is as a leftouter join to my counting table which give me my qty of labels to print per user input {?control id} however - some of the items i order with different  order units and conversion qtys for example
    qty 2 - box-10 - going into inventory 20 - I need 20 labels printed vs just 2  - since the labels to print are directly tied to the requested order qty - i need to add the exceptions because some I order with conversions that I will not convert and I just want to add them list "one of" in the selection formula

  • How to create report for user in terminal licens

    Dear Sir,
    how to take report for terminal server license, I have windows 2008 r2, I am trying to create a report for cal per user license
    it is disable.
    windows 2008 r2
    workgroup
    citrix 6.5
    thanks
    saud alam
    saudalam

    Hi,
    Thank you for posting in Windows Server Forum.
    Agree with words of TP, to create per user CAL report server must be domain joined. You cannot create report in workgroup mode. Please check beneath article for guide.
    Track the Issuance of Remote Desktop Services Per User Client Access Licenses
    http://technet.microsoft.com/en-us/library/cc754625.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Report a user!!

    I want to report a user, one more time then just blocking, because skype have to erase that account! She is a he and blackmail people!! Soo what to do?? Please help!!
    Solved!
    Go to Solution.

    Hi, CR7, and welcome to the Community,
    You may report the incident and the Skype account to Skype via e-mail: [email protected] and also  [Moderator Note: E-mail address s cited is no longer in service]  to YouTube's customer service to request the video be removed.  Block and report the contact as abuse or spam and quit all contact with them.  You can research this topic further on the Skype Account: Security-Privacy-Trust & Safety message board.
    Regards,
    Elaine
    Please see this FAQ article for further instruction:  https://support.skype.com/en/faq/FA34447/what-should-i-do-if-i-see-abusive-behavior-on-skype
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Maybe you are looking for