Speaker Issues [T7900 with Decoder]

Hey all..
Recently bought the Creative Inspire T7900 and also a decoder. Hooked up all the speakers to the main base unit, and all cables for the decoder etc.
I have the decoder connected to the TV via a SCART connector. ie. one end is the SCART for the TV and the other is the Red, White and Yellow cables for the decoder but I can never get all speakers to work no matter what mode I am in.
Any ideas how I can do this? I read the thread below but I wasnt to sure if it applied to me becuase my speakers are different.. I tried it, but I still can only get my right, left and center speakers working right, the rest, voices sound VERY squeaky. :S
Iv been terrorising Irish Support for ages about this whole matter of connecting it to the TV and when I finaly got it working (or so I thought) I hung up and then realised it wasnt all working - not all speakers work :| lol.
Hope you guys can help.
Cheers.
Message Edited by sullyirl on 10-12-2005 03:46 AM
Message Edited by sullyirl on 10-12-2005 03:53 AM

I am using the Creative Decoder DDTs-100 as advertised on the main site Im using Analog connection and Dolby Pro Logic II doesnt seem available to me (the mode doesnt go down as far as that).
Whats weird is, it was working at the start when I tried it but when I re-arranged all the wires etc. now its only the right left and centre speaker that work. :S
Hope you can help

Similar Messages

Iphone 3G S speaker issues with SMS

My new iphone has a speaker issue. When I get a text message, email, or alert the first one sounds like the speaker is blown out or distorted. However, if I go into setting to recreate the sound, it's normal. It seems to be just on the first text if the phone has been sitting for like 5 minutes. I called Apple and they said to do a restore and set up as a new phone. Did that and it is still doing it. Has anyone else had this problem or swapped their phones out yet? Just want to know if this is a hardware or software issue. I am leaning towards software because if it was hardware wouldn't it do it everytime?

I believe it may be a Sofware problem. Others are having various issues with sound as well...
http://discussions.apple.com/thread.jspa?messageID=9727071&#9727071

IPhone 5 battery life and speaker issues

Hey guys. Not sure if anyone else is having this issue but firstly. The battery life *****. And really *****. I let phone completely drain at least twice a month. Then fully charge it. Not a huge user but data I know eats it. We are talking literally within two hours of not using it and it will be down to 59%. Didn't expect this off a phone like this. iPhone 4S beats it hands down. Considering going back to it tbh.
Speaker issues are terrible. Tried the music on full pause. Then exit. Then test but still nothing. Rang apple they say its not a fault but why would other people be reporting it.
iPad 4 users. Do you have issues with battery life too? And very slow charge and very quick drain. This is a joke. Nearly a Grands worth of kit and you feel like your using a Nokia 3310.
#annoyed!

If tried techniques to get the battery to act right, such as rebooting by holding both the power and home buttons until the apple logo appears and it restarts, and those things haven't helped, take the iPhone and iPad to the Apple store genius bar and have the technicians test them to see if there is a hardware fault. Do that before the warranty runs out so you are covered.

Issues / Bug with Nokia N9

Issues / Bug with Nokia N9
1. The mobile network gets disconnected after each call and I have to wait atleast 10-20 seconds to redial or make a new call, I cannot dial a number just after I finish a call / speaking with someone. It happens on both Incoming and outgoing Calls.
Troubleshooting Steps:
1. Changed SIM card from the telecom provider atleast 3 times. The same SIM card works absolutely fine in another mobile.
2. Reset and set to default settings tried - No Result
2. The ear piece volume is considerably low.
Troubleshooting Steps:
1. Reset and set to default settings tried - No Result
3. When playing a video online on YouTube the timing for a 4 minute video shows as
34:00 34:23 instead of showing 04:00 04:23
Troubleshooting Steps:
1. Reset and set to default settings tried - No Result
4. The photos from the Facebook app built into the phone do not always load even If I am running a 3.5G Mobile Data connection or at Home on a Wi-Fi connection
Troubleshooting Steps:
1. Reset and set to default settings tried - No Result
I am from India, bought the phone last year from Abu Dhabi and it is Made in Finland.
Really I need someone to help me out here!!

If you reinstalled the OS again from Nokia, you may just have a defective phone and there could be something wrong with the hardware. I have two N9's and I haven't experience any of these problems.
Can you record these problems and post the link to youtube here so I can see what's happening?
I Choose Nokia!

Speaker issue after Mavericks Upgrade

I recently upgraded to Mavericks on my Mac Pro (mid 2010 ver.)
Now when I try to listen to Pandora, iTunes, or anything that pushes sound thru the O/S, the sound "jumps" between my Bose 5 companion computer speakers (USB) and the internal Mac Pro speakers.
Additionally, when I go to Preferences-----Sound, you can literally see the O/S jumping back and forth to these two rows "Built In Internal Speakers" and "Bose USB Audio USB". More specifically, you will hear the music thru the Bose speakers and then about every 20 seconds (sometimes it goes for over a minutes) it will "beeeeeeep" and then jump to the Mac Pro internal speakers.
I tried deleting the two .plist files as previous mentioned in past threads with no luck. Before I upgraded to Mavericks I never had ANY sound/speaker issues what so ever.
Any suggestions? Thank you

Update Saturday Jan 4, 2014
Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

My iPhone 5c sound/speaker only works with the headphones in and when I'm trying to change a ringtone in settings..

my iPhone 5c sound/speaker only works with the headphones in and when I'm trying to change a ringtone in settings.. why is this?! its not on airplane mode, its not on silent, ive tried turning it on and off, software is up-to-date etc. just no sound for text alerts or when trying to play music/videos. Help!

same issue as this guy it's a hardware issue
https://discussions.apple.com/thread/6266690?tstart=0

Soundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs

FSoundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs? ?
Greetings..
Running into a bit of a issue here I can't seem to fix. I've gone through the troubleshooting guides and FAQs already and they aren't resolving the issue.
My normal setup is a couple of desktop speakers plugged to the rear of the card through the standard ports (non-digital) and a headset with mic plugged to the device in front that includes volume controls for both mic and speakers.
I've just did a complete reinstall of Windows XP (32 bit) including everything up through SP3 and a reinstall of the drivers and associated software applications for the card as well.
The problem I am having is that I can no longer make the rear speakers (desktop speakers) play when plugged in. The 2 headset speakers still play just fine that are plugged in the front however.
What should I do to resolve this issue so that I can have both the desktop speakers and headset speakers both playing? I'm fairly sure I'm just missing a setting somewhere but for the life of me I can't figure where to fix this.
Thank you,
Culann HS

JRe: Soundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs0 I'm afriad that the CMSS3D option did not work? ? I still cannot get any speakers to play out of the rear of the soundcard.
As I said before, the goal is to try to get sound to play out of both the headset and the speakers attached to the rear of the soundcard simuntaneously.
The headset is plugged into one of those devices in the front that is in a 5 & /4" bay that has the individual knobs for adjusting volume for the headset and outbound levels for the microphone.
The speakers are plugged into the back of the soundcard and do not play any sound in any of the sockets, starting from the firewire port and counting 3 over.
Any suggestions? I? thought it might have something to do with the setting of the speakers from control panel - > Sounds and Audio Devices -> Advanced and picking the right choice there. No luck however. Same for the Creative Speaker Settings as well.
I'm at wits end and I'd be very thankful to whoever can resolve this for me. =)

SoundBlaster 5.1 no surround sound with the speaker test, but with movies

ISoundBlaster 5. no surround sound with the speaker test, but with moviesO Hello I have a new SoundBlaster XFi Surround 5. USB.
I installed the drivers on Vista 32.
I connected the Soundblaster with an optical cable with my home cinema system.
I checked the 5. speakers option in the Creative Console Starter.
When I will test the surround function by clicking the speakers in the surround test diagramm from the Console.
The front speakers are sending an testsignal, but the rear speakers and the center are silent.
I thought that are settings in the soundcontrol from vista but when I play an Movie with 5. sound, the rear speakers function.
Is ist the optical mode that only support the movie dts signal? Why the Console test from creative doesn't function?
I have further applications but they don't work. Only movies.
Thx

Hi,
S/PDIF?format can only transmit 2 channels of uncompressed audio, which is why you only hear the front channels. For movie dts, an encoded compressed stereo data is transmitted through the S/PDIF optical link to your home cinema system which then decode it into 5. audio.

Is my speaker system compatible with MSI K8N SLI Diamond?

Hi!
Can I use my old speaker system with MSI K8N SLI Diamond. My speaker system is Creative Inspire 5.1 5500D Digital with decoder. Now 5.1 sound doesn't work properly. When I try look movie with PowerDVD6, center speaker is dead and no speech on movie. On PowerDVD6, SPDIF output is selected and tried also 6.1 channel options but no, speech will not play at center speaker. Some games too 5.1 surround doesn't work. I have connected my speaker system on motherboard coaxial SPDIF to speaker systems Decoder coaxial SPDIF, and speakers on that decoder. Do I have to buy new analog speaker system to get 5.1 surround working? If I connect my speaker system directly on MB analog outputs, sound balance in very bad, rear and front speaker is good but center speaker crackling and speech at center speaker sound like volume level is much too high.

Quote from: Stick on 10-February-06, 19:24:28
if you know that the speakers are working (tested on another pc) it is usually a software configuration error. if the decoder would mess up the sounds, it is unlikely that you would hear anything in the other speakers too.
My speakers systems works perfect my previous setup, when motherboard has nForce2 SoundStorm integrated chip.
Some other forums, peoples claims that this MSI k8n motherboard can't send multichannel 5.1 surround audio on SPDIF and I have to connect my speakers on motherboard analog sound outputs.

Error while replacing IF statements with DECODE function in procedure

Hi All,
I have created a procedure which has nested IF statements. Now I want to replace the IF statements with DECODE functions to improve performance.
Procedure:
IF (var_int_sev = '0')
THEN
var_sev := '2';
ELSE
SELECT sev
INTO var_int_sev
FROM errorconfig
WHERE errorcode = var_errorcode;
var_sev := var_int_sev;
END IF;
I converted the above IF statement into DECODE function as mentioned below:
var_Sev := DECODE(var_int_sev,0,2,SELECT severity FROM errorconfig WHERE errorcode=var_ErrorCode)
But it throws below error at the select statement used inside DECODE.
Error(58,51): PLS-00103: Encountered the symbol "SELECT" when expecting one of the following: ( - + case mod new not null others <an identifier> <a double-quoted delimited-identifier> <a bind variable> avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification> <a number> <a single-quoted SQL string> pipe <an alternatively-quoted string literal with character set specification> <an alternativ
Can someone help me in converting the IF to DECODE in the above case. Also how can we use a select statement inside decode.

instead of trying to rewrite all your code and hoping that the performance will be better, it's a better option to investigate and find out which part of your application is slow
read this:
When your query takes too long ...

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

MB26 ,CO27 - goods issue components with serial number?

Hi ,everyone!
I know CO27 and MB26 can do goods issue to production order very easily and quickly!
But It seems CO27 and MB26 can not work well with the component with serial number.
I aslo know MB1A and MB1B can post goods issue for component with serial number.But in MB1A and MB11 , it is very difficult to can material by material number quickly while doing more then 100 components issue to one production order.
And for authorization purpose we restrict MIGO not to use goods issue for production order.
So I want to ask how CO27 and MB26 do goods issue for the component with serial number?
Or there is another ways to goods issue component with serial number to production order easily,exclude MB1A,MB11 and MIGO?
Thanks for any reply!

Hi Vivek
We use CO27 for goods issue to production order ,just like MB1A goods issue to production order.
But in the BOM components of the production orders ,some semi finished products are with with serial numbers ,so we can not use CO27 or MB26 to issue these components with serial numbers to production orders!

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

It is against TOU to speculate on these message board. Suggest you post your question on the Mac Rumors site.
As I already stated, there is no 10.6.8 update. If there was, it would be listed in Software Update.

Problem with DECODE block in WHERE clause

Hi,
I'm facing problem with DECODE statement. I just simulated my problem in the simple way as follows. If I execute this following query, I should get "hello", but I'm not getting anything (ZERO rows returned).
SELECT 'hello' FROM DUAL
WHERE 'sample1' in (DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',
2, '''sample4'', ''sample5'', ''sample6'''
I think some problem is there in my WHERE clause.
But When I'm exeucting the following query as a seperate query, then I'm getting the value of DECODE block properly, but didn;t understnad why its not returning the same way when I'm putting the same DECODE statement in WHERE clause.
SELECT DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',
2, '''sample4'', ''sample5'', ''sample6'''
FROM DUAL;
Please help me to get out of this problem. Thank you so much in advance.
Thanks,
Ramji.

The value returned by SELECT DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',2, '''sample4'', ''sample5'', ''sample6''') FROM DUAL;
'sample1', 'sample2', 'sample3' is a single string. Consider it x.
SELECT 'hello' FROM DUAL WHERE 'sample1' in ( DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',2, '''sample4'', ''sample5'', ''sample6'''));
is like SELECT 'hello' FROM DUAL WHERE 'sample1' in ('x');
or
SELECT 'hello' FROM DUAL WHERE 'sample1' in ('''sample1'', ''sample2'', ''sample3''') and not
SELECT 'hello' FROM DUAL WHERE 'sample1' in ('sample1', 'sample2', 'sample3');
For this same reason SELECT 'hello' FROM DUAL WHERE 'sample1' in (select '''sample1'', ''sample2'', ''sample3''' from dual);
also does'nt work.
Please use INSTR to find whether 'sample1' exists in the string 'sample1', 'sample2', 'sample3'.

Issues Capturing with Final Cut Express

Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD

Speaker Issues [T7900 with Decoder]

Similar Messages

Maybe you are looking for